SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS2009

Terrestrial Ecosystems - Topographic Moisture Potential of the Conterminous United States

As part of an effort to map terrestrial ecosystems, the U.S. Geological Survey has generated topographic moisture potential classes to be used in creating maps depicting standardized, terrestrial ecosystem models for the conterminous United States, using an ecosystems classification developed by NatureServe. A biophysical stratification approach, developed for South America and now being implemented globally, was used to model the ecosystem distributions. Substrate moisture regimes strongly influence the differentiation and distribution of terrestrial ecosystems, and therefore topographic moisture potential is one of the key input layers in this biophysical stratification. The method used to produce these topographic moisture potential classes was based on the derivation of ground moisture potential using a combination of computed topographic characteristics (CTI, slope, and aspect) and mapped National Wetland Inventory (NWI) boundaries. This method does not use climate or soil attributes to calculate relative topographic moisture potential since these characteristics are incorporated into the ecosystem model though other input layers. All of the topographic data used for this assessment were derived from the USGS 30-meter National Elevation Dataset (NED ) including the National Compound Topographic Index (CTI). The CTI index is a topographically derived measure of slope for a raster cell and the contributing area from upstream raster cells, and thus expresses potential for water flow to a point. In other words CTI data are 'a quantification of the position of a site in the local landscape', where the lowest values indicate ridges and the highest values indicate stream channels, lakes and ponds. These CTI values were compared to independent estimates of water accumulation by obtaining geospatial data from a number of sample locations representing two types of NWI boundaries: freshwater emergent wetlands and freshwater forested/shrub wetlands. Where these shorelines (the interface between the NWI wetlands and adjacent land) occurred, the CTI values were extracted and a histogram of their statistical distributions was calculated. Based on an evaluation of these histograms, CTI thresholds were developed to separate periodically saturated or flooded land, mesic uplands (moderately moist), and uplands. After the range of CTI values for these three different substrate moisture regimes was determined, the CTI values were grouped into three initial topographic moisture potential classes. As a final step in the generation of this national data layer, the uplands classification was subdivided into either very dry uplands or dry uplands. Very dry uplands were defined as uplands with relatively steep, south-facing slopes, and identification of this class was based on the slope and aspect datasets derived from the NED. The remaining uplands that did not meet these additional criteria were simply re-classified as dry uplands. The final National Topographic Moisture Potential dataset for the conterminous United States contains four classes: periodically saturated or flooded land (CTI = 18.5), mesic uplands (12 =< CTI < 18.5), dry uplands (CTI < 12), and very dry uplands (CTI < 12, Slope > 24 degrees and 91 degrees =< Aspect =< 314 degrees). This map shows a smoothed and generalized image of the four topographic moisture potential classes. Additional information about this map and any of the data developed for the ecosystems modeling of the conterminous United States is available online at http://rmgsc.cr.usgs.gov/ecosystems/.

Scientific Investigations Map↗

USGS2012

Topographic change detection at select archeological sites in Grand Canyon National Park, Arizona, 2007-2010

Human occupation in Grand Canyon, Arizona, dates from at least 11,000 years before present to the modern era. For most of this period, the only evidence of human occupation in this iconic landscape is provided by archeological sites. Because of the dynamic nature of this environment, many archeological sites are subject to relatively rapid topographic change. Quantifying the extent, magnitude, and cause of such change is important for monitoring and managing these archeological sites. Such quantification is necessary to help inform the continuing debate on whether and how controlled releases from Glen Canyon Dam, located immediately upstream of Grand Canyon National Park, are affecting site erosion rates, artifact transport, and archeological resource preservation along the Colorado River in Grand Canyon. Although long-term topographic change resulting from a variety of natural processes is inherent in the Grand Canyon region, continued erosion of archeological sites threatens both the archeological resources and our future ability to study evidence of past cultural habitation. Thus, this subject is of considerable interest to National Park Service managers and other stakeholders in the Glen Canyon Dam Adaptive Management Program. Understanding the causes and effects of archeological site erosion requires a knowledge of several factors, including the location, timing, and magnitude of the changes occurring in relation to archeological resources, the rates of change, and the relative contribution of potential causes. These potential causes include sediment depletion associated with managed flows from Glen Canyon Dam, site-specific weather and overland flow patterns, visitor impacts, and long-term regional climate change. To obtain this information, highly accurate, spatially specific data are needed from sites undergoing change. Using terrestrial lidar techniques, and building upon three previous surveys of archeological sites performed in 2006 and 2007, we collected two new datasets in April and September 2010 and processed and improved upon existing methods to generate high-accuracy (3 to 5 cm vertical change threshold) topographic change-detection maps for 10 survey areas encompassing 9 archeological sites along the Colorado River corridor. We also used terrestrial lidar techniques to investigate several other metrics for studying archeological site stability, including monitoring cultural structures and artifacts and remotely measuring cryptobiotic soil crust areas. Our topographic change results indicate that 9 of 10 survey areas showed signs of either erosion, deposition, or both during the 2007–2010 time interval and that these changes can be linked to a variety of geomorphic processes, primarily overland flow gullying and aeolian sand transport. In several cases, large (>50 cm) vertical change occurred, and in one case, more than 100 m 3 of sediment was eroded. Further, for all sites monitored throughout the river corridor during this time period, the overall signal was related to erosion rather than deposition. These results highlight the potential for rapid archeological site change in Grand Canyon. Whereas the topographic change results presented herein provide the highest level of change detection yet performed on entire archeological sites in Grand Canyon, additional work in combining these results with site-specific weather, hydrology, and geomorphology data is needed to provide a more thorough understanding of the causes of the documented topographic changes. Linking lidar-derived measurements of topographic changes with these other data sources should provide land managers with a scientific basis for making management decisions regarding archeological resources in Grand Canyon National Park and assist in answering open questions regarding the influence that sediment-depleted flows from Glen Canyon Dam have on archeological site stability.

Arizona↗

USGS2007

Comparative lahar hazard mapping at Volcan Citlaltépetl, Mexico using SRTM, ASTER and DTED-1 digital topographic data

In this study, we evaluated and compared the utility of spaceborne SRTM and ASTER DEMs with baseline DTED-1 “bald-earth” topography for mapping lahar inundation hazards from volcan Citlaltépetl, Mexico, a volcano which has had a history of producing debris flows of various extents. In particular, we tested the utility of these topographic datasets for resolving ancient valley-filling deposits exposed around the flanks of the volcano, for determining their magnitude using paleohydrologic methods and for forecasting their inundation limits in the future. We also use the three datasets as inputs to a GIS stream inundation flow model, LAHARZ, and compare the results. In general all three datasets, with spatial resolution of 90 m or better, were capable of resolving debris flow and lahar deposits at least 3 × 10 6 m 3 in volume or larger. Canopy- and slope-related height errors in the ASTER and SRTM DEMs limit their utility for measuring valley-filling cross-sectional area and deriving flow magnitude for the smallest deposits using a cross-sectional area to volume scaling equation. Height errors in the ASTER and SRTM DEMs also causes problems in resolving stream valley hydrography which controls lahar flow paths and stream valley morphology which controls lahar filling capacity. However, both of the two spaceborne DEM datasets are better than DTED-1 at resolving fine details in stream hydrography and erosional morphologies of volcaniclastics preserved in the valleys around the more humid, eastern flanks of the volcanic range. The results of LAHARZ flow inundation modeling using all three DEMs as inputs are remarkably similar and co-validate one another. For example, at Citlaltépetl all lahar simulations show that the city of Orizaba is the most vulnerable to flows similar in magnitude to, or larger than, one that occurred in 1920. Many of the other cities and towns illustrated are built higher up on terrace deposits of older debris flows, and are safe from all but the largest flows, which occur less frequently. Finally, ASTERs 60 km swath width and 8% duty cycle presents a challenge for mapping lahar inundation hazards at E–W oriented stream valleys in low-latitude areas with persistent cloud cover. However, its continued operations enhances its utility as a means for updating the continuous but one-time coverage of SRTM, and for filling voids in the SRTM dataset such as those that occur along steep-sided valleys prone to hazards from future lahars.

Journal of Volcanology and Geothermal Research↗

USGS2011

Improved mapping of National Atmospheric Deposition Program wet-deposition in complex terrain using PRISM-gridded data sets

High-elevation regions in the United States lack detailed atmospheric wet-deposition data. The National Atmospheric Deposition Program/National Trends Network (NADP/NTN) measures and reports precipitation amounts and chemical constituent concentration and deposition data for the United States on annual isopleth maps using inverse distance weighted (IDW) interpolation methods. This interpolation for unsampled areas does not account for topographic influences. Therefore, NADP/NTN isopleth maps lack detail and potentially underestimate wet deposition in high-elevation regions. The NADP/NTN wet-deposition maps may be improved using precipitation grids generated by other networks. The Parameter-elevation Regressions on Independent Slopes Model (PRISM) produces digital grids of precipitation estimates from many precipitation-monitoring networks and incorporates influences of topographical and geographical features. Because NADP/NTN ion concentrations do not vary with elevation as much as precipitation depths, PRISM is used with unadjusted NADP/NTN data in this paper to calculate ion wet deposition in complex terrain to yield more accurate and detailed isopleth deposition maps in complex terrain. PRISM precipitation estimates generally exceed NADP/NTN precipitation estimates for coastal and mountainous regions in the western United States. NADP/NTN precipitation estimates generally exceed PRISM precipitation estimates for leeward mountainous regions in Washington, Oregon, and Nevada, where abrupt changes in precipitation depths induced by topography are not depicted by IDW interpolation. PRISM-based deposition estimates for nitrate can exceed NADP/NTN estimates by more than 100% for mountainous regions in the western United States.

Environmental Monitoring and Assessment↗

USGS2000

Airborne laser mapping of Assateague National Seashore Beach

Results are presented from topographic surveys of the Assateague Island National Seashore using an airborne scanning laser altimeter and kinematic Global Positioning System (GPS) technology. The instrument used was the Airborne Topographic Mapper (ATM), developed by the NASA Arctic Ice Mapping (AIM) group from the Goddard Space Flight Center's Wallops Flight Facility. In November, 1995, and again in May, 1996, these topographic surveys were flown as a functionality check prior to conducting missions to measure the elevation of extensive sections of the Greenland Ice Sheet as part of NASA's Global Climate Change program. Differences between overlapping portions of both surveys are compared for quality control. An independent assessment of the accuracy of the ATM survey is provided by comparison to surface surveys which were conducted using standard techniques. The goal of these projects is to make these measurements to an accuracy of ± 10 cm. Differences between the fall 1995 and 1996 surveys provides an assessment of net changes in the beach morphology over an annual cycle.

Maryl↗

USGS1999

Spatial geologic data model for the Gunnison, Grand Mesa, Uncompahgre National Forests mineral resource assessment area, southwestern Colorado and digital data for the Leadville, Montrose, Durango, and Colorado parts of the Grand Junction, Moab, and Cortez 1° x 2° geologic maps

The digital geologic and geographic information system (GIS) data presented here were prepared to aid in Grand Mesa, Uncompahgre, Gunnison National Forest (GMUG) mineral resource assessment Project studies by the U.S. Geological Survey Mineral Resource Program. The goals of the GMUG Project is to provide mineral resource data and an assessment for undiscovered mineral resources in U.S. Forest Service (USFS) and Bureau of Land Management (BLM) lands in southwestern Colorado. The Project area covers a large region in southwestern Colorado that is bounded by latitudes 37o 45’ to 39o 30’ north and longitudes 106o to 109o west. The study area is covered by all or parts of six 1o x2o topographic and quadrangle geologic maps, which include geologic maps for the Leadville (Tweto and others, 1978), Montrose (Tweto and others, 1976), Durango (Steven and others, 1974), Grand Junction (Cashion, 1973), Moab (Williams, 1976), and Cortez (Haynes and others, 1972) quadrangles. These geologic maps were used inasmuch as a complete remapping and compilation effort for this study area was beyond the scope of the Project.

Colorado↗

USGS2020

Mapping forested wetland inundation in the Delmarva Peninsula, USA: Use of deep learning model

The Delmarva Peninsula in the eastern United States is dominated by thousands of small, forested depressional wetlands that are highly sensitive to climate change and climate variability but provide critical ecosystem services. Due to the relatively small size of these depressional wetlands and occurrence under forest canopy cover, it is very challenging to map their inundation status based on existing remote sensing data and traditional classification approaches. In this study, we applied a state-of-the-art deep semantic segmentation network to map forested wetland inundation in the Delmarva region by integrating leaf-off Worldview-3 (WV3) multispectral data with fine resolution light detection and ranging (lidar) intensity and topographic data, including digital elevation model (DEM) and topographic wetness index (TWI). Wetland inundation maps generated from lidar intensity were used for model calibration and validation. The wetland inundation map results were also validated by field polygons and compared to the U.S. Fish and Wildlife Service National Wetlands Inventory (NWI) geospatial dataset and a random forest output from a previous study. Our results demonstrate that our deep learning model can accurately determine inundation status with an overall accuracy of 95% against field data and high overlap with lidar mapped inundation. The integration of topographic metrics in deep learning model can improve classification accuracy in depressional wetlands. This study highlights the great potential of deep learning models to map wetland inundation through use of high resolution optical and lidar remote sensing datasets.

Maryland↗

USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗

USGS2014

Analysis of floods, including the tropical storm Irene inundation, of the Ottauquechee River in Woodstock, Bridgewater, and Killington and of Reservoir Brook in Bridgewater and Plymouth, Vermont

Digital flood-inundation maps were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers, New York District for a 25-mile reach of the Ottauquechee River and a 2-mile reach of Reservoir Brook in Vermont. The reach of the Ottauquechee River that was studied extends from River Road Bridge in Killington, Vt., to the Taftsville Dam in the village of Taftsville, in the town of Woodstock, Vt., and the reach of Reservoir Brook extends from a location downstream from the Woodward Reservoir in Plymouth, Vt., to its confluence with the Ottauquechee River in Bridgewater, Vt. The inundation maps depict estimates of the areal extent of flooding corresponding to the 1-percent annual exceedance probability (AEP) flood (also referred to as the 100-year flood) and the peak of the tropical storm Irene flood of August 28, 2011, which was greater than the 0.2-percent AEP flood (also referred to as the 500-year flood), as referenced to the USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). In addition to the two digital flood inundation maps, flood profiles were created that depict the study reach flood elevation of tropical storm Irene of August 2011 and the 10-, 2-, 1-, and 0.2-percent AEP floods, also known as the 10-, 50-, 100-, and 500-year floods, respectively. The 10-, 2-, 1-, and 0.2-percent AEP flood discharges were determined using annual peak flow data from the USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). Flood profiles were computed for the Ottauquechee River and Reservoir Brook by means of a one-dimensional step-backwater model. The model was calibrated using documented high-water marks of the peak of the tropical storm Irene flood of August 2011 as well as stage discharge data as determined for USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). The simulated water-surface profiles were combined with a digital elevation model within a geographic information system to delineate the areas flooded during tropical storm Irene and for the 1-percent AEP water-surface profile. The digital elevation model data were derived from light detection and ranging (lidar) data obtained for a 3,281-foot (1,000-meter) corridor along the Ottauquechee River study reach and were augmented with 33-foot (10- meter) contour interval data in the modeled flood-inundation areas outside the lidar corridor. The 33-foot (10-meter) contour interval USGS 15-minute quadrangle topographic digital raster graphics map used to augment lidar data was produced at a scale of 1:24,000. The digital flood inundation maps and flood profiles along with information regarding current stage from USGS streamgages on the Internet provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

Vermont↗

USGS1995

Mapping the response of riparian vegetation to possible flow reductions in the Snake River, Idaho

This study was initiated to determine the general effects of potential flow reductions in the middle Snake River (Swan Falls Dam downstream to the Idaho-Oregon border) on its riparian vegetation. Considerable water from the river is currently used to irrigate the adjacent Snake River Plain, and increased demand for water in the future is likely. The problem was subdivided into several research components including: field investigation of the existing riparian vegetation and river environment, hydrological modeling to calculate the effects of one flow scenario on hydrological regime, and integration of vegetation and hydrological modeling results with a Geographic Information System (GIs) to map the riverbed, island, and bank conditions under the scenario flow. Field work was conducted in summer 1990. Riparian vegetation along 40 U.S. Geological Survey cross-sections was sampled at approximately 1.25 mile intervals within the 50 mile long study area. Cross-section and flow data were provided by the U.S. Geological. Survey. GIs mapping of land/water cover using ARC/INFO was based on 1987 aerial photographs. Riverbed contour maps were produced by linking cross-section data, topographic contouring software ( anudem ), and GIs. The maps were used to spatially display shallow areas in the channel likely to become vegetated under reduced flow conditions. The scenario would reduce flow by approximately 20% (160 MAF) and lower the river an average of 0.5 ft. The scenario flow could cause a drop in the elevation of the riparian zone comparable to the drop in mean river level and expansion of the lower riparian zone into shallow areas of the channel. The GIs maps showed that the shallow areas of the channel more likely to become vegetated under the scenario flow are located in wide reaches near islands. Some possible ecological consequences of the scenario flow include a greater area of riparian habitat, reduced flow velocity and sedimentation in shallow channels leading to channel deactivation, increased island visitation and nest predation by predatory mammals due to loss of a water barrier between some islands and banks, and larger populations of alien plant species in the new riparian vegetation.

Idaho, Oregon↗

USGS1996

Great Basin geoscience data base

This CD-ROM serves as the archive for 73 digital GIS data set for the Great Basin. The data sets cover Nevada, eastern California, southeastern Oregon, southern Idaho, and western Utah. Some of the data sets are incomplete for the total area. On the CD-ROM, the data are provided in three formats, a prototype Federal Data Exchange standard format, the ESRI PC ARCVIEW1 format for viewing the data, and the ESRI ARC/INFO export format. Extensive documentation is provided to describe the data, the sources, and data enhancements. The following data are provided. One group of coverages comes primarily from 1:2,000,000-scale National Atlas data and can be assembled for use as base maps. These various forms of topographic information. In addition, public land system data sets are provided from the 1:2,500,000-scale Geologic Map of the United States and 1:500,000-scale geologic maps of Nevada, Oregon, and Utah. Geochemical data from the National Uranium Resource Evaluation (NURE) program are provided for most of the Great Basin. Geophysical data are provided for most of the Great Basin, typically gridded data with a spacing of 1 km. The geophysical data sets include aeromagnetics, gravity, radiometric data, and several derivative products. The thematic data sets include geochronology, calderas, pluvial lakes, tectonic extension domains, distribution of pre-Cenozoic terranes, limonite anomalies, Landsat linear features, mineral sites, and Bureau of Land Management exploration and mining permits.

Data Series↗

USGS1996

Controls on surface water chemistry in the upper Merced River basin, Yosemite National Park, California

Surface water draining granitic bedrock in Yosemite National Park exhibits considerable variability in chemical composition, despite the relative homogeneity of bedrock chemistry. Other geological factors, including the jointing and distribution of glacial till, appear to exert strong controls on water composition. Chemical data from three surface water surveys in the upper Merced River basin conducted in August 1981, June 1988 and August 1991 were analysed and compared with mapped geological, hydrological and topographic features to identify the solute sources and processes that control water chemistry within the basin during baseflow. Water at most of the sampling sites was dilute, with alkalinities ranging from 26 to 77 μequiv. l −1 . Alkalinity was much higher in two subcatchments, however, ranging from 51 to 302 μequiv. l −1 . Base cations and silica were also significantly higher in these two catchments than in the rest of the watershed. Concentrations of weathering products in surface water were correlated to the fraction of each subcatchment underlain by surficial material, which is mostly glacial till. Silicate mineral weathering is the dominant control on concentrations of alkalinity, silica and base cations, and ratios of these constituents in surface water reflect the composition of local bedrock. Chloride concentrations in surface water samples varied widely, ranging from <1 to 96 μequiv. l −1 . The annual volume-weighted mean chloride concentration in the Merced River at the Happy Isles gauge from 1968 to 1990 was 26 μequiv. l −1 , which was five times higher than in atmospheric deposition (4–5 μequiv. l −1 ), suggesting that a source of chloride exists within the watershed. Saline groundwater springs, whose locations are probably controlled by vertical jointing in the bedrock, are the most likely source of the chloride. Sulphate concentrations varied much less than most other solutes, ranging from 3 to 14 μequiv. l −1 . Concentrations of sulphate in quarterly samples collected at the watershed outlet also showed relatively little variation, suggesting that sulphate may be regulated to some extent by a within-watershed process, such as sulphate adsorption.

Hydrological Processes↗

USGS2024

Phenology forecasting models for detection and management of invasive annual grasses

Non-native annual grasses can dramatically alter fire frequency and reduce forage quality and biodiversity in the ecosystems they invade. Effective management techniques are needed to reduce these undesirable invasive species and maintain ecosystem services. Well-timed management strategies, such as grazing, that are applied when invasive grasses are active prior to native plants can control invasive species spread and reduce their impact; however, anticipating the timing of key phenological stages that are susceptible to management over vast landscapes is difficult, as the phenology of these species can vary greatly over time and space. To address this challenge, we created range-wide phenology forecasts for two problematic invasive annual grasses: cheatgrass ( Bromus tectorum ), and red brome ( Bromus rubens ). We tested a suite of 18 mechanistic phenology models using observations from monitoring experiments, volunteer science, herbarium records, timelapse camera imagery, and downscaled gridded climate data to identify the models that best predicted the dates of flowering and senescence of the two invasive grass species. We found that the timing of flowering and senescence of cheatgrass and red brome were best predicted by photothermal time models that had been adjusted for topography using gridded continuous heat-insolation load index values. Phenology forecasts based on these models can help managers make decisions about when to schedule management actions such as grazing to reduce undesirable invasive grasses and promote forage production, quality, and biodiversity in grasslands; to predict the timing of greatest fire risk after annual grasses dry out; and to select remote sensing imagery to accurately map invasive grasses across topographic and latitudinal gradients. These phenology models also have the potential to be operationalized for within-season or within-year decision support.

Ecosphere↗

USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗

USGS1993

Geomorphic observations of rivers in the Oregon Coast Range from a regional reconnaissance perspective

Changes in long profile, gradient, gradient index, pseudo-hypsometric integral, valley incision, and sinuosity fractal dimension for rivers in western Oregon were studied to determine their usefulness in assessing an hypothesis of differential uplift within the Coast Range. All data were gathered from topographic quadrangles and geologic maps, and so the results of this paper are limited to the description of river forms with only limited interpretations. Rivers were naturally divided into three groups, those in the western Coast Range, the eastern Coast Range, and the Klamath and Cascade Ranges, and differences in river morphometry were generalized. Rivers in the western Coast Range had more divergent characteristics, whereas those in the other groups were more similar within each group. For example, long profiles of western Coast Range rivers had diverse forms, but in the other groups, long profiles were similar within the group. Pseudo-hypsometric integrals had a wide scatter in the western Coast Range, but in the other ranges, the pseudo-hypsometric integral was more narrowly defined. Valley entrenchment and high sinuosity were common in the western Coast Range, and were less visible in the eastern Coast Range. These regional generalizations do not hold for the central Coast Range near 44.5°N where the Yaquina and Marys Rivers are located. In the eastern Coast Range, the Marys River is unique in that it has a convex bulge in its long profile, does not have an increasing valley-floor width to valley height ratio downstream, and has a high sinuosity fractal dimension. In the western Coast Range, the Yaquina River is unique in that it has a smoothly decreasing long profile, has a very low pseudo-hypsometric integral, and does not have a decreasing valley-floor width to valley height ratio downstream. There may be many explanations for these observations, but these observations are also consistent with tectonic interpretations that the central western Coast Range is the locus of synclinal tilting and that the entire Oregon coast is experiencing landward tilting and uplift.

Geomorphology↗

USGS2013

Accuracy assessment of a mobile terrestrial lidar survey at Padre Island National Seashore

The higher point density and mobility of terrestrial laser scanning (light detection and ranging (lidar)) is desired when extremely detailed elevation data are needed for mapping vertically orientated complex features such as levees, dunes, and cliffs, or when highly accurate data are needed for monitoring geomorphic changes. Mobile terrestrial lidar scanners have the capability for rapid data collection on a larger spatial scale compared with tripod-based terrestrial lidar, but few studies have examined the accuracy of this relatively new mapping technology. For this reason, we conducted a field test at Padre Island National Seashore of a mobile lidar scanner mounted on a sport utility vehicle and integrated with a position and orientation system. The purpose of the study was to assess the vertical and horizontal accuracy of data collected by the mobile terrestrial lidar system, which is georeferenced to the Universal Transverse Mercator coordinate system and the North American Vertical Datum of 1988. To accomplish the study objectives, independent elevation data were collected by conducting a high-accuracy global positioning system survey to establish the coordinates and elevations of 12 targets spaced throughout the 12 km transect. These independent ground control data were compared to the lidar scanner-derived elevations to quantify the accuracy of the mobile lidar system. The performance of the mobile lidar system was also tested at various vehicle speeds and scan density settings (e.g. field of view and linear point spacing) to estimate the optimal parameters for desired point density. After adjustment of the lever arm parameters, the final point cloud accuracy was 0.060 m (east), 0.095 m (north), and 0.053 m (height). The very high density of the resulting point cloud was sufficient to map fine-scale topographic features, such as the complex shape of the sand dunes.

Texas↗

USGS1989

Geologic analyses of Shuttle Imaging Radar (SIR-B) data of Kilauea Volcano, Hawaii

Analyses of imaging radar data of volcanic terranes on Earth and Venus have emphasized the need for a clearer understanding of how these data can be most effectively used to accomplish important volcanological goals, including the interpretation of eruptive styles and the characterization of the geologic history of volcanic centers. The second Shuttle Imaging Radar experiment (SIR-B) obtained two digital images over the summit caldera and the Southwest Rift Zone of Kilauea Volcano in 1984. Our geologic analyses of these images indicate that SIR-B data are particularly useful for delineating the distribution and surface textural variations of a'a lava flows, for mapping large-scale topographic features with radar-facing slopes, and for identifying an areally extensive pyroclastic deposit. Analyses of the SIR-B data of Kilauea, however, do not permit unambiguous identification of landforms such as pahoehoe lava flows, cinder cones, and fissures. Although separation of low-return units such as pahoehoe lava flows and adjacent pyroclastic ash is not greatly improved using standard image-enhancement techniques, the texture-analysis technique applied here did facilitate discrimination of such smooth-surfaced volcanic deposits. Although analyses of the SIR-B data permit a generally accurate interpretation of the eruptive history of Kilauea, the inability to distinguish low-return pahoehoe flows results in misinterpretation of several aspects of Kilauea volcanism, suggesting that caution should be exercised in the interpretation of SAR data of volcanic terranes.

Hawaii↗

USGS2023

Construction and modification of debris-flow alluvial fans as captured in the geomorphic and sedimentary record: Examples from the western Sangre de Cristo Mountains, south-central Colorado

Debris-flow alluvial fans are iconic features of dynamic landscapes and are hypothesized to record tectonic and climatic change. Here, we highlight their complex formation and evolution through an exemplary suite of Quaternary debris-flow alluvial fans emanating from the western range front of the Sangre de Cristo Mountains in south-central Colorado, USA. To evaluate the constructive and modifying processes that produce fan form and the associated sedimentary signatures, we applied a combined geomorphologic and sedimentologic approach using sedimentary facies analysis, soils mapping, high-resolution topographic data, and luminescence geochronology to document timing of fan construction and modification. We explored two subsets of fans in the study area: a southern set sourced from the extensively glaciated drainages of the Blanca Peak massif, and a northern set from the unglaciated drainages south of Great Sand Dunes National Park. Both sets of fans have: (1) active and successively abandoned surfaces that show evolving degradation of primary features through modification by secondary processes, (2) associated facies that display distinct characteristics representative of primary depositional and secondary modifying sedimentary processes, and (3) evidence of primary debris flow with subsequent modification by secondary processes. We found that surface geomorphology and facies assemblages in exposed alluvial-fan deposits represent sediment transport processes on both active and abandoned lobes. The link between fan surface morphologies and the sedimentary facies of their deposits provides a basis for an evolutionary process–based interpretation of debris-flow alluvial-fan geomorphology and provides a better understanding of complexities in buried paleosurfaces (intraformational progressive unconformities), surficial deformation, and landform development as recorded in debris-flow fan deposits in the sedimentary record.

Colorado↗