SEARCH · Geology Reports

Results for “Ring”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS1997

Collection and analysis of traditional ecological knowledge about a population of arctic tundra caribou

Aboriginal peoples want their ecological knowledge used in the management of wildlife populations. To accomplish this, management agencies will need regional summaries of aboriginal knowledge about long-term changes in the distribution and abundance of wildlife populations and ecological factors that influence those changes. Between 1983 and 1994, we developed a method for collecting Inuit knowledge about historical changes in a caribou ( Rangifer tarandus ) population on southern Baffin Island from c. 1900 to 1994. Advice from Inuit allowed us to collect and interpret their oral knowledge in culturally appropriate ways. Local Hunters and Trappers Associations (HTAs) and other Inuit identified potential informants to maximize the spatial and temporal scope of the study. In the final interview protocol, each informant (i) established his biographical map and time line, (ii) described changes in caribou distribution and density during his life, and (iii) discussed ecological factors that may have caused changes in caribou populations. Personal and parental observations of caribou distribution and abundance were reliable and precise. Inuit who had hunted caribou during periods of scarcity provided more extensive information than those hunters who had hunted mainly ringed seals ( Phoca hispida ); nevertheless, seal hunters provided information about coastal areas where caribou densities were insufficient for the needs of caribou hunters. The wording of our questions influenced the reliability of informants' answers; leading questions were especially problematic. We used only information that we considered reliable after analyzing the wording of both questions and answers from translated transcripts. This analysis may have excluded some reliable information because informants tended to understate certainty in their recollections. We tried to retain the accuracy and precision inherent in Inuit oral traditions; comparisons of information from several informants and comparisons with published and archival historical reports indicate that we retained these qualities of Inuit knowledge.

Nunavut↗

USGS2026

Design and functionality analysis of the high-stress permeameter (HSP), a device developed for measuring mechanical and hydraulic properties of gas hydrate-bearing pressure core

To characterize sediment compressibility and permeability in the presence of gas hydrate, a naturally occurring combination of water and methane that requires elevated pressure and reduced temperature to remain stable, a high-stress permeameter (HSP) device was developed. The HSP was designed to accept gas hydrate-bearing pressure core specimens in their plastic liner at pressures of 10–11 MPa. The HSP was further designed to carry out compressibility and permeability tests over a range of effective stresses while maintaining the requirements for gas hydrate stability. To verify the validity of HSP measurements of sediment consolidation properties, we tested remolded kaolin samples in the HSP and three standard fixed-ring oedometers. Furthermore, we compared the direct fluid-flow permeability measurements from the HSP with estimates based on Terzaghi’s log-time method for calculating permeability from 1-dimensional oedometer-style consolidation tests. We found agreement between all devices for consolidation (e.g., coefficients of compressibility and recompression) and permeability results. These findings indicate the suitability of the HSP for consolidation tests, as well as the log-time method for estimating permeability from oedometer consolidation tests.

Geotechnical Testing Journal↗

USGS1935

The Bureau of Fisheries disease service

Picture yourself bending over a trough picking eggs. The clatter of hoofs suddenly rings from the snow-covered hatchery roof—or if you must be technical—from the driveway. The hatchery door opens and in walks a bewhiskered gentleman wearing a brilliant red suit—it's Santa Claus. He walks slowly over to where you are standing—he speaks—

Progressive Fish-Culturist↗

USGS2004

Age estimation for shovelnose sturgeon: A cautionary note based on annulus formation in pectoral fin rays

Numerous studies have examined the age and growth of shovelnose sturgeon Scaphirhynchus platorynchus, but only one study attempted to validate age estimation techniques. Therefore, our objective was to use marginal increment analysis to validate annulus formation in pectoral fin rays of shovelnose sturgeon collected from the Missouri River. We also compared the precision of age estimates between two different readers. Marginal increment distance indicated that for most of the populations an opaque band was laid down in pectoral fin rays during the summer. However, opaque bands were formed throughout the year in some individuals, which could be problematic when using fin rays for age estimation. The agreement of age estimates by two readers for shovelnose sturgeon was only 18%, and differences in ages between the two readers increased for older fish. The presence of split annuli, false annuli, spawning bands, imbedded rays, and deteriorating sections made individual growth rings difficult to separate. Our findings verified that opaque bands are formed annually during the summer in the pectoral fin rays of most shovelnose sturgeon, but some individuals form opaque bands during other times. Pectoral fin rays will probably continue to be the most practical method of age estimation in shovelnose sturgeon, but ages estimated by this method should be used with caution.

North American Journal of Fisheries Management↗

USGS2010

Waterfowl ecology and avian influenza in california: Do host traits inform us about viral occurrence?

We examined whether host traits influenced the occurrence of avian influenza virus (AIV) in Anatidae (ducks, geese, swans) at wintering sites in California's Central Valley. In total, 3487 individuals were sampled at Sacramento National Wildlife Refuge and Conaway Ranch Duck Club during the hunting season of 2007-08. Of the 19 Anatidae species sampled, prevalence was highest in the northern shoveler (5.09%), followed by the ring-necked duck (2.63%), American wigeon (2.57%), bufflehead (2.50%), greater white-fronted goose (2.44%), and cinnamon teal (1.72%). Among host traits, density of lamellae (filtering plates) of dabbling ducks was significantly associated with AIV prevalence and the number of subtypes shed by the host, suggesting that feeding methods may influence exposure to viral particles. ?? 2010 American Association of Avian Pathologists.

Avian Diseases↗

USGS2005

Prevalence and spatial distribution of intraerythrocytic parasite(s) in Puget Sound rockfish (Sebastes emphaeus) from the San Juan Archipelago, Washington (USA)

Two morphologically distinct forms of an intraerythrocytic parasite(s) were detected by microscopic observation of Giemsa-stained blood films in 45.7% of 119 rockfish (Sebastes emphaeus) from the San Juan Archipelago (Washington State, U.S.A.). Infection prevalence for both forms was 53% in males, 44% in females, and 33% in fish of undetermined gender. A binucleate "ring-stage" was present at all 4 geographic sites, with a mean prevalence of 45.7%, while mean prevalence of a larger gamont-like form from the same sites was 5.1%. The relationship of the 2 forms to each other could not be determined. Neither schizogony nor binary fission was evident in any of the infected erythrocytes and the parasites contained no obvious pigment. The possibility of the 2 morphologic forms being 2 distinct species is supported by the observation that no difference in parasitemia was seen in the binucleate form among sites (1.6-1.9%), while parasitemia of the gamont-like form varied significantly among sites, ranging from a high of 4% to a low of 0.1%. Taxonomic status of either form could not be determined at this time based on limited existing morphologic data. ?? American Society of Parasitologists 2005.

Journal of Parasitology↗

USGS2015

Minimizing marker mass and handling time when attaching radio-transmitters and geolocators to small songbirds

Radio-transmitters and light-level geolocators are currently small enough for use on songbirds weighing <15 g. Various methods are used to attach these markers to larger songbirds, but with small birds it becomes especially important to minimize marker mass and bird handling time. Here, we offer modifications to harness materials and marker preparation for transmitters and geolocators, and we describe deployment methods that can be safely completed in 20–60 s per bird. We describe a 0.5-mm elastic sewing thread harness for radio-transmitters that allows nestlings, fledglings, and adults to be marked with the same harness size and reliably falls off to avoid poststudy effects. We also describe a 0.5-mm jewelry cord harness for geolocators that provides a firm fit for >1 yr. Neither harness type requires plastic or metal tubes, rings, or other attachment fixtures on the marker, nor do they require crimping beads, epoxy, scissors, or tying knots while handling birds. Both harnesses add 0.03 g to the mass of markers for small wood-warblers (Parulidae). This minimal additional mass is offset by trimming transmitter antennas or geolocator connection nodes, resulting in no net mass gain for transmitters and 0.02 g added for geolocators compared with conventional harness methods that add >0.40 g. We and others have used this transmitter attachment method with several small songbird species, with no effects on adult and fledgling behavior and survival. We have used this geolocator attachment method on 9-g wood-warblers with no effects on return rates, return dates, territory fidelity, and body mass. We hope that these improvements to the design and deployment of the leg-loop harness method will enable the safe and successful use of these markers, and eventually GPS and other tags, on similarly small songbirds.

The Condor↗

USGS2018

Introduction - The impacts of the 2008 eruption of Kasatochi Volcano on terrestrial and marine ecosystems in the Aleutian Islands, Alaska

The Aleutian Islands are situated on the northern edge of the so-called “Pacific Ring of Fire,” a 40,000-km-long horseshoe-shaped assemblage of continental landmasses and islands bordering the Pacific Ocean basin that contains many of the world's active and dormant volcanoes. Schaefer et al. (2009) listed 27 historically active volcanoes in the Aleutian Islands, of which nine have had at least one major eruptive event since 1990. Volcanic eruptions are often significant natural disturbances, and ecosystem responses to volcanic eruptions may vary markedly with eruption style (effusive versus explosive), frequency, and magnitude of the eruption as well as isolation of the disturbed sites from potential colonizing organisms (del Moral and Grishin, 1999). Despite the relatively high frequency of volcanic activity in the Aleutians, the response of island ecosystems to volcanic disturbances is largely unstudied because of the region's isolation. The only ecological studies in the region that address the effects of volcanic activity were done on Bogoslof Island, a remote, highly active volcanic island in the eastern Aleutians, which grew from a submarine eruption in 1796 (Merriam, 1910; Byrd et al., 1980; Byrd and Williams, 1994). Nevertheless, in the 214 years of Bogoslof's existence, the island has been visited only intermittently. Kasatochi Island is a small (2.9 km by 2.6 km, 314 m high) volcano in the central Aleutian Islands of Alaska (52.17°N latitude, 175.51°W longitude; Fig. 1) that erupted violently on 7-8 August 2008 after a brief, but intense period of precursory seismic activity (Scott et al., 2010 [this issue]; Waythomas et al., in review). The island is part of the Aleutian arc volcanic front, and is an isolated singular island. Although the immediate offshore areas are relatively shallow (20–50 m water depth), the island is about 10 km south of the 2000 m isobath, north of which, ocean depths increase markedly. Kasatochi is located between the deepwater basin of the Bering Sea to the north and shallower areas of intense upwelling in Atka and Fenimore Passes in the North Pacific Ocean to the south. This area apparently produces high marine productivity based on concentrations of feeding marine birds and mammals (see Drew et al., 2010 [this issue]). Kasatochi is about 85 km northeast of Adak, the nearest community and a regional transportation hub, and about 19 km northwest of the western end of Atka Island. The nearest historically active volcanoes are Great Sitkin volcano, about 35 km to the west, and Korovin volcano on Atka Island, about 94 km to the east. Koniuji Island, another small volcanic island, is located about 25 km east of Kasatochi (Fig. 1).

Alaska↗

USGS2003

Multiple seismogenic processes for high-frequency earthquakes at Katmai National Park, Alaska: Evidence from stress tensor inversions of fault-plane solutions

The volcanological significance of seismicity within Katmai National Park has been debated since the first seismograph was installed in 1963, in part because Katmai seismicity consists almost entirely of high-frequency earthquakes that can be caused by a wide range of processes. I investigate this issue by determining 140 well-constrained first-motion fault-plane solutions for shallow (depth < 9 km) earthquakes occurring between 1995 and 2001 and inverting these solutions for the stress tensor in different regions within the park. Earthquakes removed by several kilometers from the volcanic axis occur in a stress field characterized by horizontally oriented σ 1 and σ 3 axes, with σ 1 rotated slightly (12°) relative to the NUVEL1A subduction vector, indicating that these earthquakes are occurring in response to regional tectonic forces. On the other hand, stress tensors for earthquake clusters beneath several Katmai cluster volcanoes have vertically oriented σ 1 axes, indicating that these events are occurring in response to local, not regional, processes. At Martin-Mageik, vertically oriented σ 1 is most consistent with failure under edifice loading conditions in conjunction with localized pore pressure increases associated with hydrothermal circulation cells. At Trident-Novarupta, it is consistent with a number of possible models, including occurrence along fractures formed during the 1912 eruption that now serve as horizontal conduits for migrating fluids and/or volatiles from nearby degassing and cooling magma bodies. At Mount Katmai, it is most consistent with continued seismicity along ring-fracture systems created in the 1912 eruption, perhaps enhanced by circulating hydrothermal fluids and/or seepage from the caldera-filling lake.

Alaska↗

USGS2025

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California↗

USGS2001

Mountain hemlock growth responds to climatic variability at annual and decadal time scales

Improved understanding of tree growth responses to climate is needed to model and predict forest ecosystem responses to current and future climatic variability. We used dendroecological methods to study the effects of climatic variability on radial growth of a subalpine conifer, mountain hemlock ( Tsuga mertensiana ). Tree-ring chronologies were developed for 31 sites, spanning the latitudinal and elevational ranges of mountain hemlock in the Pacific Northwest. Factor analysis was used to identify common patterns of interannual growth variability among the chronologies, and correlation and regression analyses were used to identify climatic factors associated with that variability. Factor analysis identified three common growth patterns, representing groups of sites with different climate–growth relationships. At high-elevation and midrange sites in Washington and northern Oregon, growth was negatively correlated with spring snowpack depth, and positively correlated with growth-year summer temperature and the winter Pacific Decadal Oscillation index (PDO). In southern Oregon, growth was negatively correlated with spring snowpack depth and previous summer temperature, and positively correlated with previous summer precipitation. At the low-elevation sites, growth was mostly insensitive to annual climatic variability but displayed sensitivity to decadal variability in the PDO opposite to that found at high-elevation sites. Mountain hemlock growth appears to be limited by late snowmelt, short growing seasons, and cool summer temperatures throughout much of its range in the Pacific Northwest. Earlier snowmelt, higher summer temperatures, and lower summer precipitation in southern Oregon produce conditions under which growth is limited by summer temperature and/or soil water availability. Increasing atmospheric CO 2 concentrations could produce warmer temperatures and reduced snowpack depths in the next century. Such changes would likely increase mountain hemlock growth and productivity throughout much of its range in Washington and northern Oregon. Increased summer drought stress and reduced productivity would be likely, however, in mountain hemlock forests of southern Oregon and near the species lower elevation limit at some sites.

Oregon, Washington↗

USGS2010

Are wolves saving Yellowstone's aspen? A landscape-level test of a behaviorally mediated trophic cascade

Behaviorally mediated trophic cascades (BMTCs) occur when the fear of predation among herbivores enhances plant productivity. Based primarily on systems involving small-bodied predators, BMTCs have been proposed as both strong and ubiquitous in natural ecosystems. Recently, however, synthetic work has suggested that the existence of BMTCs may be mediated by predator hunting mode, whereby passive (sit-and-wait) predators have much stronger effects than active (coursing) predators. One BMTC that has been proposed for a wide-ranging active predator system involves the reintroduction of wolves ( Canis lupus ) to Yellowstone National Park, USA, which is thought to be leading to a recovery of trembling aspen ( Populus tremuloides ) by causing elk ( Cervus elaphus ) to avoid foraging in risky areas. Although this BMTC has been generally accepted and highly popularized, it has never been adequately tested. We assessed whether wolves influence aspen by obtaining detailed demographic data on aspen stands using tree rings and by monitoring browsing levels in experimental elk exclosures arrayed across a gradient of predation risk for three years. Our study demonstrates that the historical failure of aspen to regenerate varied widely among stands (last recruitment year ranged from 1892 to 1956), and our data do not indicate an abrupt cessation of recruitment. This pattern of recruitment failure appears more consistent with a gradual increase in elk numbers rather than a rapid behavioral shift in elk foraging following wolf extirpation. In addition, our estimates of relative survivorship of young browsable aspen indicate that aspen are not currently recovering in Yellowstone, even in the presence of a large wolf population. Finally, in an experimental test of the BMTC hypothesis we found that the impacts of elk browsing on aspen demography are not diminished in sites where elk are at higher risk of predation by wolves. These findings suggest the need to further evaluate how trophic cascades are mediated by predator–prey life history and ecological context.

Yellowstone↗

USGS2007

Biotransformation of caffeine, cotinine, and nicotine in stream sediments: Implications for use as wastewater indicators

Microbially catalyzed cleavage of the imadazole ring of caffeine was observed in stream sediments collected upstream and downstream of municipal wastewater treatment plants (WWTP) in three geographically separate stream systems. Microbial demethylation of the N -methyl component of cotinine and its metabolic precursor, nicotine, also was observed in these sediments. These findings indicate that stream sediment microorganisms are able to substantially alter the chemical structure and thus the analytical signatures of these candidate waste indicator compounds. The potential for in situ biotransformation must be considered if these compounds are employed as markers to identify the sources and track the fate of wastewater compounds in surface-water systems.

Colorado, Iowa↗

USGS2009

A nonlethal microsampling technique to monitor the effects of mercury on wild bird eggs

Methylmercury is the predominant chemical form of mercury reported in the eggs of wild birds, and the embryo is the most sensitive life stage to methylmercury toxicity. Protective guidelines have been based mainly on captive-breeding studies with chickens (Gallus gallus), mallards (Anas platyrhynchos), and ring-necked pheasants (Phasianus colchicus) or on field studies where whole eggs were collected and analyzed and the effects of the mercury were measured based on the reproductive success of the remaining eggs. However, both of these methods have limitations. As an alternative, we developed a technique that involves extracting a small sample of albumen from a live egg, sealing the egg, returning the egg to its nest to be naturally incubated by the parents, and then relating the hatching success of this microsampled egg to its mercury concentration. After first developing this technique in the laboratory using chicken and mallard eggs, we selected the laughing gull (Larus atricilla) and black-necked stilt (Himantopus mexicanus) as test subjects in the field. We found that 92% of the microsampled laughing gull eggs met our reproductive endpoint of survival to the beginning of hatching compared to 100% for the paired control eggs within the same nests. Microsampled black-necked stilt eggs exhibited 100% hatching success compared to 93% for the paired control eggs. Our results indicate that microsampling is an effective tool for nonlethally sampling mercury concentrations in eggs and, as such, can be used for monitoring sensitive species, as well as for improving studies that examine the effects of mercury on avian reproduction.

Environmental Toxicology and Chemistry↗

USGS2006

Spectroscopic mapping of the white horse alunite deposit, Marysvale volcanic field, Utah: Evidence of a magmatic component

Previous studies have demonstrated that the replacement alunite deposits just north of the town of Marysvale, Utah, USA, were formed primarily by low-temperature (100??-170?? C), steam-heated processes near the early Miocene paleoground surface, immediately above convecting hydrothermal plumes. Pyrite-bearing propylitically altered rocks occur mainly beneath the steam-heated alunite and represent the sulfidized feeder zone of the H2S-dominated hydrothermal fluids, the oxidation of which at higher levels led to the formation of the alunite. Maps of surface mineralogy at the White Horse deposit generated from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were used in conjunction with X-ray diffraction studies of field samples to test the accuracy and precision of AVIRIS-based mineral mapping of altered rocks and demonstrate the utility of spectroscopic mapping for ore deposit characterization. The mineral maps identified multiple core zones of alunite that grade laterally outward to kaolinite. Surrounding the core zones are dominantly propylitically altered rocks containing illite, montmorillonite, and chlorite, with minor pyrite, kaolinite, gypsum, and remnant potassium feldspar from the parent rhyodacitic ash-flow tuff. The AVIRIS mapping also identified fracture zones expressed by ridge-forming selvages of quartz + dickite + kaolinite that form a crude ring around the advanced argillic core zones. Laboratory analyses identified the aluminum phosphate-sulfate (APS) minerals woodhouseite and svanbergite in one sample from these dickite-bearing argillic selvages. Reflectance spectroscopy determined that the outer edges of the selvages contain more dickite than do the medial regions. The quartz + dickite ?? kaolinite ?? APS-mineral selvages demonstrate that fracture control of replacement processes is more prevalent away from the advanced argillic core zones. Although not exposed at the White Horse deposit, pyrophyllite ?? ordered illite was identified using AVIRIS in localized, superimposed conduits within propylitically altered rocks in nearby alteration systems of similar age and genesis that have been eroded to deeper levels. The fracture zones bearing pyrophyllite, illite, dickite, natroalunite, and/or APS minerals indicate a magmatic component in the dominantly steam-heated system. ?? 2006 Society of Economic Geologists, Inc.

Economic Geology↗

USGS2007

The Russell gold deposit, Carolina Slate Belt, North Carolina

Gold deposits have been mined in the Carolina slate belt from the early 1800s to recent times, with most of the production from large mines in South Carolina. The Russell mine, one of the larger producers in North Carolina, is located in the central Uwharrie Mountains, and produced over 470 kg of gold. Ore grades averaged about 3.4 grams per tonne (g/ t), with higher-grade zones reported. The Russell deposit is interpreted to be a sediment-hosted, gold-rich, base-metal poor, volcanogenic massive sulfide deposit in which gold was remobilized, in part, during Ordovician metamorphism. The ore was deposited syngenetically with laminated siltstones of the late Proterozoic Tillery Formation that have been metamorphosed to a lower greenschist facies. The Tillery Formation regionally overlies subaerial to shallow marine rhyolitic volcanic and volcaniclastic rocks of the Uwharrie Formation and underlies the marine volcanic and sedimentary rocks of the Cid Formation. Recent mapping has shown that a rhyolitic dome near the Russell mine was extruded during the deposition of the lower part of the Tillery Formation, at about the same time as ore deposition. Relict mafic, rock fragments present in the ore zones suggest contemporaneous bimodal (rhyolite-basalt) volcanism. The maximum formation age of the Russell deposit is younger than 558 Ma, which is similar to that of the larger, well known Brewer, Haile, and Ridgeway deposits of South Carolina. Gold was mined from at least six zones that are parallel to the regional metamorphic foliation. These strongly deformed zones consist of northeast-trending folds, high-angle reverse faults, and asymmetric doubly plunging folds overturned to the southeast. The dominant structure at the mine is an asymmetric doubly plunging anticline with the axis trending N 45?? E, probably related to late Ordovician (456 ?? 2 Ma) regional metamorphism and deformation. Two stages of pyrite growth are recognized. Stage 1, primary, spongy pyrite, is present in thin massive sulfide layers parallel to bedding and intergrown with pyrrhotite, chalcopyrite, sphalerite, and sparse arsenopyrite. Stage 2, secondary pyrite, is present as euhedral, idiomorphic rims on spongy pyrite and as veinlets that parallel the regional foliation. Stage 1 pyrite was deposited syngenetically or diagenetically during or soon after sedimentation. Stage 2 pyrite overgrowths and veins resulted from recrystallization or remobilization of stage 1 pyrite, probably during deformation related to Ordovician regional metamorphism. It is proposed that the spongy texture of the stage 1 pyrite represents nucleation and growth of pyrite on organic matter, possibly of bacterial origin. Other textures, such as geometric voids in spongy pyrite, As-rich zones surrounding central voids, 60-??m ring structures composed of spongy pyrite, and layers of spongy pyrite interlayered with bedding laminations, also appear to indicate replacement of organic matter by pyrite. Stage 1 pyrite contains up to 0.06 wt percent gold. The ??34S values of pyrite in and near pyritic ore (3.5-4.5???), in the rhyolite dome (5.1-5.4???) and in the Tillery Formation (5.9-6.2???) are interpreted to reflect mixing of sulfur derived from igneous and seawater sources. Whole-rock ??18O values of nearby unaltered mudstone are about 11 per mil whereas those from altered mudstone at the deposit are 7.4 to 10.6 per mil. The lower ?? 18O values are interpreted to indicate possible high-temperature exchange between relatively low ??18O hydrothermal fluids and the wall rocks. Gold, As, K, and Mo are enriched relative to the regional background in both the ore zones and in pyrite veins and disseminations in the nearby rhyolite dome, suggesting a possible genetic link between the rhyolitic volcanism and the gold mineralization. ?? 2007 Society of Economic Geologists, Inc.

Economic Geology↗

USGS1955

Salt-water encroachment as induced by sea-level excavation on Angaur Island

Angaur, southwesternmost of the Palau Islands, 800 miles southwest of Guam, has an area of 3.2 square miles and consists of reef limestone of Pliocene through Recent age. In the northwestern part of the island a basin is formed by a ringlike ridge that has a maximum altitude of 150 feet. To the east and south a series of arc-shaped lower ridges and intervening depressions are concentric with the ring ridge. Beyond these, a low plain with shallow swales composes the remaining two-thirds of the island. The ridges are composed of indurated limestone, whereas the plain is underlain chiefly by unconsolidated coralline fragments. Phosphate has been mined from the three types of topographic depressions since 1908. When power equipment was introduced, excavations were extended below sea level. Lakes formed in these excavations and, despite an annual rainfall of 110 inches, contamination of fresh-water supplies and of agricultural land by salt water resulted from tidal pulsations through the fissured rock. As a result, stoppage of mining was imminent unless remedial measures could be devised. Angaur provides a model of the operations of a Ghyben-Herzberg fresh-water lens on an oceanic island. At numerous lakes, wells, and test holes, continuing observations were made on water levels; amplitude and lag of tidal fluctuations; and mineral content, pH, and temperature of the lens. These observations guided the selection of constantly adjusted remedial measures, which included partitioning of lakes, and bottom filling or back filling of compartments that failed to freshen because of fissures connecting them with the sea. © 1955 Society of Economic Geologists, Inc.

Angaur↗

USGS1975

Fluid inclusion studies of vein, pipe, and replacement deposits, northwestern San Juan Mountains, Colorado

Base and precious metal ores valued in excess of $300 million have been mined from vein, pipe, and replacement deposits located on the northwest side of, and structurally related to, the middle Tertiary Silverton caldera. A belt of normal faults radial to the caldera contains veins which have been mined for as much as 15,000 feet (4,600 m) along strike and 3,700 feet (1,100 m) downdip. Structural relations, metal distributions, and fluid inclusion data suggest that many of the veins were open at the same general time and received the same mineralization. Fluid inclusions in quartz and sphalerite of the main ore stage of the Argentine and adjoining veins have filling temperatures ranging from 315 degrees to 249 degrees C and salinities from 7.9 to 0.1 wt percent NaCl equivalent. However, the majority of inclusions from base metal and gold stages are in a relatively narrow range near 280 degrees to 290 degrees C and salinities are unusually low (less than 2 wt %). Filling temperatures in postsulfide quartz and fluorite are as low as 153 degrees C and salinities are generally less than 0.5 wt percent. A pressure correction of about +25 degrees C should be added to the filling temperatures. Ore fluids were physically homogeneous liquids over the 3,700-foot (1,100 m) vertical and 11,200-foot (3,400 m) lateral range studied and no systematic variations in filling temperatures or salinity in this space are noted, but significant fluctuations are evident locally. Recently developed base metal replacement deposits occur in the Eocene Telluride Conglomerate adjacent to many metal-bearing veins. Calc-silicate alteration of the conglomerate host was probably by moderately saline fluids that ranged in temperature from 320 degrees to about 400 degrees C. Quartz-bearing clasts in altered zones contain secondary halitebearing inclusions with filling temperatures of about 250 degrees C and salinities about 34 wt percent; such inclusions are not known from the base metal stage and are interpreted to have been preore. Hydrothermal quartz, sphalerite, and calcite from replacement pods contain inclusions with filling temperatures ranging from 204 degrees to 309 degrees C and salinities from 11.2 to 0.2 wt percent. That the replacement zones and throughgoing veins are genetically related is suggested by the similarity of filling temperatures and compositions of base metal-stage fluid inclusions and by structural evidence. Small high-grade pipe deposits of base and precious metals occur along the ring-fault zone of the Silverton caldera. Filling temperatures for inclusions in quartz, sphalerite, and barite of the main ore stage of these deposits range from 216 degrees to 308 degrees C and salinities range from 1.6 to 0.2 wt percent NaCl. Quartz in altered wall rocks and silicified capping contains moderately saline secondary inclusions with relatively uniform liquid: vapor ratios that suggest filling temperatures of about 225 degrees to 300 degrees C. From the available samples there is no fluid inclusion evidence for boiling. Throttling, which had been hypothesized to explain the telescoped nature of the pipe ores, is neither substantiated nor discredited by the inclusion data.

Colorado↗