Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Pennsylvania Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

676 records · Page 38Linked to original sources
USGS2003

Case study for delineating a contributing area to a well in a fractured siliciclastic-bedrock aquifer near Lansdale, Pennsylvania

A supply well used by the North Penn Water Authority near Lansdale, Pa., was selected as a case study for delineating a contributing area in a fractured siliciclastic-bedrock aquifer. The study emphasized the importance of refining the understanding of factors that control ground-water movement to the well by conducting (1) geophysical logging and flow measurements, (2) ground-water level monitoring, (3) aquifer testing, and (4) geochemical sampling. This approach could be applicable for other wells in siliciclastic-bedrock terranes, especially those of Triassic age in southeastern Pennsylvania. The principal methods for refining the understanding of hydrology at supply well MG-1125 were aquifer testing, water-level measurements, and geophysical logging. Results of two constant-discharge aquifer tests helped estimate the transmissivity of water-producing units and evaluate the anisotropy caused by dipping beds. Results from slug tests provided estimates of transmissivity that were used to evaluate the results from the constant-discharge aquifer tests. Slug tests also showed the wide distribution of transmissivity, indicating that ground-water velocities must vary considerably in the well field. Water-level monitoring in observation wells allowed maps of the potentiometric surface near the well field to be drawn. The measurements also showed that the hydraulic gradient can change abruptly in response to pumping from nearby supply wells. Water levels measured at a broader regional scale in an earlier study also provided a useful view of the potentiometric surface for purposes of delineating the contributing area. Geophysical logging and measurements of flow within wells showed that about 60 percent of water from supply well MG-1125 probably is contributed from relatively shallow water-producing fractures from 60 to 125 feet below land surface, but measurable amounts of water are contributed by fractures to a depth of 311 feet below land surface. Chemical samples supported the evidence that shallow fractures probably contribute significant amounts of water to well MG-1125. The large contribution of water from shallow fractures indicates that the area providing part of the recharge to the well is not far removed from the wellhead. Preliminary delineations of the contributing area and the 100-day time-of travel area were computed from a water budget and time-of-travel equation. These delineations provided insight into the size (but not the shape) of the contributing areas. Three other approaches were used and results compared: (1) uniform-flow equation, (2) hydrogeologic mapping, and (3) numerical modeling. The uniform-flow equation predicted a contributing area that seemed unrealistic—extending far across the ground-water divide into an adjacent watershed. Hydrogeologic mapping, if used with the potentiometric surface and constrained by the water budget, produced contributing area that was similar to that from numerical modeling. Numerical modeling allowed the incorporation of anisotropy caused by dipping water-producing units, differing transmissivity values of geologic units, and ground-water withdrawals from nearby supply wells. The numerical modeling showed that groundwater withdrawals from nearby supply wells affected the contributing area to supply well MG-1125 but had less effect on the 100-day time-of-travel area.

Water-Resources Investigations Report↗
USGS2003

The early Mesozoic Birdsboro central Atlantic margin basin in the Mid-Atlantic region, eastern United States

The early Mesozoic Birdsboro basin (new name) was a single, elongate depositional trough in the present Mid-Atlantic area of the eastern United States, extending north-eastward from central Virginia across Maryland, Pennsylvania, and New Jersey into southern New York. What now remains after erosion comprises the Barboursville, Culpeper, Gettysburg, and Newark remnants. Some 7?? km of late Triassic and early Jurassic continental sediments of varying provenances entered and spread across in the Birdsboro basin in several depositional environments. The five resulting sedimentary lithosomes include feldspathic sandstone, quartzose sandstone, red silty mudstone, gray shale, and fanglomerate. The extensive interbedding, intertonguing, and lateral gradation among these lithosomes suggest that they were contemporary and closely interrelated. The feldspathic sandstone lithosome contains sediment with a southeastern provenance that accumulated in a bajada environment extending the length of the southeastern side of the basin. Sediment in the quartzose sandstone lithosome had a northwestern provenance-the coarse-grained fraction formed regional alluvial fans at the mouths of four major input centers. The finer-grained fraction was deposited in the distal reaches of these fans and in the playa environments in the interfan areas; this fraction formed the red silty mudstone lithosome. Gray/black shales and argillites of the gray shale lithosome accumulated in lacustrine environments in the interfan areas. The fanglomerate lithosome comprises numerous small, lobate deposits of poorly sorted sediment along both basin margins. The location and time of activity of the northwest input centers largely determined the distribution and areal extent of the various depositional environments and consequent lithosome along the length and across the width of the basin. The Birdsboro basin was deformed (tilted, faulted, and folded) sometime after the deposition of the youngest preserved rocks (early Sinemurian). The deformation varied along the length of the basin, producing differences in the amount of tilting, structural elevation, and subsequent erosion. The present erosional remnants create the illusion of four originally separate depositional basins.

Geological Society of America Bulletin↗
USGS1955

The natural channel of Brandywine Creek, Pennsylvania

This study of the channel of Brandy wine Creek, Pennsylvania, consists of three parts. The first is an analysis of the changes which take place in the width, depth, velocity, slope of the water surface, suspended load, and roughness factor with changing discharge below the bankfull stage at each of several widely separated cross sections of the channel. Expressed as functions of the discharge, it is found that the variables behave systematically. In every section studied, as the discharge increases, the velocity increases to about the 0.6 power, depth to the 0.4, and load to the 2.0 power of the discharge. The roughness decreases to the 0.2 power of the discharge. The relative magnitudes and the direction of these variations are similar to those which have been observed in other rivers in the United States, primarily in the West. Some modifications of the hypotheses applicable to the western rivers are probably required because on Brandywine Creek the difference between the materials on the bed and in the banks is considerably greater than it is on most of the western rivers studied. In the second part of the paper the progressive changes of the same variables in the downstream direction with increasing discharge at a given frequency are described. Despite the disorderly appearance of the stream, it is found that the variables display a progressive, orderly change in the downstream direction when traced from the headwater tributaries through the trunk stream of Brandywine Creek. At a given frequency of flow, width increases with discharge to about the 0.5 power. Depth increases downstream somewhat less rapidly, while the slope and roughness both decrease in the downstream direction. Despite a decrease in the size of the material on the bed, both the mean velocity and the mean bed velocity increase downstream. The rates of change of these variables are in close accord with the changes observed on rivers flowing in alluvium and in stable irrigation canals. These relationships hold for all flows up to the bankfull stage. Analysis of the streamflow records indicates that the annual maximum discharge equals or exceeds the bankfull stage roughly once every 2 years. The regularity in the behavior of the variables with changing discharges both at-a-station and in the downstream direction and the similar rates of change of the variables on Brandywine Creek and in stable irrigation canals suggest the existence of a quasi-equilibrium in the channel of the creek. Part three of this study is concerned with this concept of equilibrium in streams. By analogy with canals and with several rivers in diverse regions of the United States it may be concluded that this quasi-equilibrium is closely related to the discharge, and to the concentration of the suspended load. The shape and longitudinal profile of the channel are determined by these two independent factors which operate within the limits set by the local geology. The latter determines the initial size, shape, and resistance of the material provided to the channel. The existence of a quasi-equilibrium among the variables studied suggests that most reaches on Brandywine Creek are at grade. This is true if the term "grade," when applied to natural rivers, is synonymous with quasi-equilibrium. The adjustability of the variables in the channel rather than the stability of any particular shape or longitudinal profile of the channel is emphasized when t

Pennsylvania↗
USGS1991

Effects of detrital influx in the Pennsylvanian Upper Freeport peat swamp

Quartz cathodoluminescence properties and mineralogy of three sets of samples and vegetal and/ or miospore data from two sets of samples from the Upper Freeport coal bed, west-central Pennsylvania, show that detrital influence from a penecontemporaneous channel is limited to an area less than three km from the channel. The sets of samples examined include localities of the coal bed where (1) the coal is thin, split by partings, and near a penecontemporaneous fluvial channel, (2) the coal is relatively thick and located approximately three km from the channel, and (3) the coal is thick and located approximately 12 km from the channel. Samples from locality 1 (nearest the channel) have relatively high-ash yields (low-temperature ash average = 27.3% on a pyrite- and calcite-free basis) and high proportions of quartz and clay minerals. The quartz is primarily detrital, as determined by cathodoluminescent properties, and the ratio of kaolinite to illite is low. In addition, most of the plant remains and miospores indicate peat-forming plants that required low nutrient levels for growth. In contrast, samples from localities 2 and 3, from the more interior parts of the bed, contained predominantly authigenic quartz grains nd yielded low-temperature ash values of less than 14% on a pyrite- and calcite-free basis. The low-temperature ash contains low concentrations of quartz and clay minerals and the ratio of kaolinite to illite is relatively high. Although intact core was not available for paleobotanical analyses, another core collected within 1 km from locality 3 contained plant types interpreted to have required high nutrient levels for growth. These data indicate that mineral formation is dominated by authigenic processes in interior parts of the coal body. Some of the authigenic quartz may have been derived from herbaceous ferns as indicated by patterns in the palynological and paleobotanical data. In contrast, detrital processes appeared to be limited to in areas directly adjacent to the penecontemporaneous channel where the coal bed is high in ash, split by mineral-rich partings, and of little or no economic value.

International Journal of Coal Geology↗
USGS1967

Swatara Creek basin of southeastern Pennsylvania: An evaluation of its hydrologic system

Local concentrations of population in the Swatara Creek basin of Pennsylvania find it necessary to store, transport, and treat water because local supplies are either deficient or have been contaminated by disposal of wastes in upstream areas. Water in the basin is available for the deficient areas and for dilution of the coal-mine drainage in the northern parts and the sewage wastes in the southern parts. Swatara Creek drains 576 square miles just east of Harrisburg, Pa., and is the largest tributary to the Susquehanna River from the north side below Harrisburg. It rises in the southern Pocono Mountains and flows southwestward across the Lebanon Plateau. On an average day Swatara Creek discharges more than 630 million gallons into the Susquehanna River at Middletown, Pa. In a year this amounts to about 23 inches of water over the entire basin and is the residual from an average annual precipitation of 45.5 inches. During an average year the flow in Swatara Creek from the upper third of the basin above Harper Tavern is always greater than 1,300 mgd (million gallons per day) for at least 15 days and is always greater than 25 mgd for at least 350 days. The daily streamflow from the basin averages 1.1 mgd per sq mi, but yields from different areas range from 0.97 to 1.22 mgd per sq mi. These variations are caused chiefly by differences in precipitation and land cover. The area of lowest yield is in the valleys west of Tremont, and the highest yields are in the Upper and Lower Little Swatara Creek subbasins. At high and medium stages the chemical character of the water in the streams is suitable for public and private supplies. At lower stages, defending on the areas and the amounts of contamination by coal-mine drainage and sewage pollution, the natural flow may require some treatment. At low stages the chemical characteristics of the natural flow not affected by man is almost identical with that of the ground water in the area drained by the stream. In general, the total dissolved solids range from about 25 to 400 parts per million and the hardness is as much as about 300 parts per million. The ground-water increment to the base flow of Swatara Creek averages about 240 mgd, or about 8.8 inches annually, for the basin. Generally, ground-water supplies in amounts of less than 0.5 mgd can be developed south of Blue Mountain. Supplies of several million gallons per day have been developed for industrial use from the permeable limestones in the south-central part of the basin. More intensive investigation in other parts of the basin would indicate areas where supplies of more than 0.5 mgd could be developed from properly spaced wells. The chemical character of water from wells depends largely on the host rock. In highly soluble rocks water contains large amount of dissolved solids; in more resistant rocks concentrations are lower. The chemical character of unpolluted ground water generally reflects the composition of the more readily soluble minerals in the local geologic environment. Areas contaminated by septic- tank effluent may have above normal amounts of nitrate and detergent products. Except where polluted, most ground water is suitable for public and industrial uses without extensive treatment. Sites for storage of surface water exist in the part of the basin lying in the valley and ridge area. As much as 30 to 40 percent of the annual flow could be impounded for release as low-flow augmentation for dilution of mine drainage and other wastes in the basin. Low sediment yields of supplying drainage areas would ensure a long life expectancy of reservoirs at these sites. Overbank flooding of the main stem of the Swatara Creek and its tributaries has occurred many times in the past. However, it has not been a hazard because urban development has not encroached on the flood plain. An inundation map of the August 1933 flood provides a basis that urban planners may use to avoid future damage. As water in the Swatara Creek moves downstream to the Susquehanna River, the flow is influenced consecutively by a large annual rainfall on the northern valley and ridge area, the wastes of surface and subsurface coal-mining activities, and less annual rainfall on the part of the basin lying in the Lebanon Plateau area; the flow is supplemented and further influenced by many tributaries and by the industrial and domestic wastes that are carried by these secondary streams. The annual precipitation ranges from 52 inches at the east edge and 49 inches at the west edge of the mountainous part of the basin to about 41 inches at the southwestern part at Middletown. The rainfall generally is adequate during the growing season to mature the crops. The mean annual temperature at Lebanon is about 52°F, and the growing season is about 180 days. In this report the basin has been divided into eight hydrologic zones, leased on runoff, natural use of water, and chemical character of water. Four zones lie in the valley and ridge area, three lie in the Lebanon Plateau area, and one lies in the highland along the southeastern basin boundary. In each of the zones the hydrologic characteristics are virtually the same, but they may be completely different from those in adjacent zones. The boundaries of the zones generally coincide with boundaries between geologic formations, and the areas in each zone include rocks of similar influence on water. Streams in zone 4 at the northeast edge of the plateau have the highest average surface runoff from 1.2 to 1.1 mgd per sq mi whereas those in zone 2 at the northwest edge of the valley and ridge area have the lowest, about 1.0 mgd. Streams in zone 8, along the southeast edge of the basin, have the largest sustained low-flow yield, about 0.26 to 0.19 mgd per sq mi; those in zone 5 overlying the Martinsburg Shale east of Harrisburg have the smallest sustained low-flow yields, 0.03 to 0.01 mgd. Streams in the limestone area of zone 7 have the greatest range in low-flow yields in any one zone from 0.60 to 0 mgd per sq mi. Low-flow yields in zones 1 through 4 range from 0.13 to 0.03 mgd per sq mi. Surface flows from zones 1 and 2 are generally acidic and contain high concentrations of sulfate, iron, and total dissolved solids especially where contaminated with mine wastes. Surface flows from zones 3 and 4 are dilute, slightly alkaline, and suitable for public water supplies. Surface flows from zones 5, 6, and 7 are alkaline and contain moderate concentrations of dissolved solids with waters of highest hardness occurring in zone 7. Surface flows from zone 8 are dilute to moderately mineralized and are relatively high in silica concentration. Nitrate concentrations are high in surf Fee flows below sewage outfalls and in ground water contaminated by septic tank effluent and industrial wastes. Average annual sediment yields of 550 to 650 tons per square mile are characteristic of zones 1 and 2 where strip mining has destroyed the forest cover and coal culm is carried into the streams. From agricultural lands on the Martinsburg Shale in zones 5 and 6, annual sediment yields range from 300 to 350 tons per square mile; but from agricultural lands on the siliceous rocks in zone 8 and zones 3 and 4 in the valley and ridge area, the sediment yield ranges from 200 to 250 tons annually per square mile. Lowest annual sediment yields in the basin are in the forested areas of siliceous rocks in zones 2, 3, 4, and 5, and in the sinkhole topography of the limestones in zone 7 where the yield ranges from 30 to 35 tons and 50 to 60 tons per square mile, respectively. The amount of ground water that can be developed in the basin is dependent on the ability of the underlying rocks to yield water to wells. More than 300 gpm (gallons per minute) can be obtained from wells in alluvial materials in the valley bottoms and in some of the limestones where large solution channels and fractures are penetrated by the wells. From 50 to 300 gpm can be obtained from wells in loosely cemented sandstones and in fractured limestones. From 10 to 50 gpm can be developed from wells in the shales and harder sandstones. The most dense rocks will yield from 1 to 10 gpm from fractures and crevices. Most wells yield water from the upper 350 feet of the formation, for this part contains the most fractures or solution channels. Studies show that the velocity at which a contaminant will move downstream in the basin is related to the discharge of the stream at the time. At a stream discharge of about 400 mgd at Pine Grove, a contaminant in Swatara Creek would require about 40 hours to move from Pine Grove to Middletown. As a result of dispersion and dilution, the maximum concentration of the contaminant at Middletown would be less than 20 percent the concentration at Pine Grove under these conditions. An evaluation of the availability of water in the basin indicates that about I,239 mgd enters as precipitation, 630 mgd leaves as streamflow, 580 mgd is evaporated and transpired, and 56 mgd is diverted for use by man. Not all the diversions for man's use are lost to the basin, as about 27 mgd is returned as sewage for reuse. About one-fourth of the waste water is returned to the ground and the remainder to stream drainageways. Of that diverted by man, 11.6 mgd is used for public supply and 44.4 mgd for industrial and private supplies. Diversions of streamflow furnish 86 percent of the public supply and 27 percent of the industrial supply, and ground-water sources yield the remainder. Municipal and private sewage treatment plants are upgrading the waste water in many places, but no provisions are being made for treatment other than natural dilution and assimilation for the 15 mgd of coal-nine drainage in the northern part of the basin. Technology for economic treatment of mine water is not available at this time, although research in this field is being done. Urbanization eastward from Harrisburg and around Lebanon has increased the population density of the basin. Densities of 500 people per square mile and water use exceeding 2.0 mgd per sq mi can be expected in the future. By the year 2000 the population of the basin may increase 60 percent; and if the per capita rate of use increases 0.5 percent per year the domestic requirements for water will be about two times the present use, or 23 mgd. Similarly, if the present 1:4 ratio of domestic use to industrial use of water continues, at least 89 mgd will be needed for industry in the future. Although an increase to twice the present use of water can be foreseen, or 112 mgd, water for the dilution and assimilation of wastes from treatment systems are not included. Providing water for dilution of wastes from treatment plants has not been a problem, but in the future the amounts needed for this purpose will be greater as the population increases. As water becomes more valuable, treatment of sewage wastes to reduce the biochemical-oxygen-demand load by at least 80 to 90 percent will be necessary to conserve water for more productive uses. As much as 100 mgd may be needed for waste dilution in the basin by year 2000. The present trends in suburban and light industrial development will probably persist in the basin. Problems arising through changes in economic value of water, conflicts in use, and alternatives in development are typical of those confronting the manager of a water-resource system.

Pennsylvania↗
USGS1988

Paleoecology of Middle Pennsylvanian-age peat-swamp plants in Herrin coal, Kentucky, U.S.A.

To develop a method for quantifying the vegetation of Pennsylvania-age coal beds, of four coal-ball (permineralized peat) profiles and four coal column samples from the Herrin coal bed (Kentucky No. 11) Carbondale Formation in western Kentucky were compared. An estimated 89.5% of the coal can be identified botanically. Compaction ratios for individual tissues were estimated using point counts of organic matter in coal balls. The estimated abundances of major plant groups (lycopods, ferns, sphenopsids, and pteridosperms) in coal balls differ by less than 10% compared to coal after accounting for differential compaction of plant tissues. Standard deviations in taxonomic and maceral composition among coal columns are generally less than 2%. Consistent differences in botanical composition were found between benches showing that the method is consistent when applied to sufficient thicknesses of coal. It was not possible to make fine-scale correlations within the coal bed using the vegetational data; either the flora varied considerably from place to place or the method of quantification is unreliable for small increments of coal (5 cm or less). In the coal, pteridosperm abundance is positively correlated with underlying shale partings. This correlation suggests that pteridosperms are favored either by higher nutrient levels or disturbance. In the third of four benches in the Herrin coal bed, a succession from Sigillaria -containing zones to zones dominated by Lepidophloios hallii is interpreted as a shift towards wetter conditions. In the other benches, the main factors controlling the taxonomic composition appear to have been the relative abundance of nutrients and/or the frequency of disturbance as indicated by the relative abundance of partings. Criteria for distinguishing between domed and planar swamps are discussed. These include: distribution of partings, type of plant succession, and changes in plant diversity, average plant size, preservational quality and sporinite content. The infrequency of partings in bench C suggests a peat dome developed while the peat of that bench was accumulating but other evidence either fails to support the development of a peat dome or is ambiguous. The maceral composition resembles those of other Carboniferous coals which are thought to have formed from planar peat swamps. Formation of fusain bands appears to be associated with processes occurring above the peat surface, such as burning or prolonged oxidative exposure. Oxidation of accumulated peat is unlikely because fusain bands rarely include more than a single plant.

International Journal of Coal Geology↗
USGS1996

Possible continuous-type (unconventional) gas accumulation in the Lower Silurian "Clinton" sands, Medina Group and Tuscarora Sandstone in the Appalachian Basin; a progress report of the 1995 project activities

INTRODUCTION: In the U.S. Geological Survey's (USGS) 1995 National Assessment of United States oil and gas resources (Gautier and others, 1995), the Appalachian basin was estimated to have, at a mean value, about 61 trillion cubic feet (TCF) of recoverable gas in sandstone and shale reservoirs of Paleozoic age. Approximately one-half of this gas resource is estimated to reside in a regionally extensive, continuous-type gas accumulation whose reservoirs consist of low-permeability sandstone of the Lower Silurian 'Clinton' sands and Medina Group (Gautier and others, 1995; Ryder, 1995). Recognizing the importance of this large regional gas accumulation for future energy considerations, the USGS initiated in January 1995 a multi-year study to evaluate the nature, distribution, and origin of natural gas in the 'Clinton' sands, Medina Group sandstones, and equivalent Tuscarora Sandstone. The project is part of a larger natural gas project, Continuous Gas Accumulations in Sandstones and Carbonates, coordinated in FY1995 by Ben E. Law and Jennie L. Ridgley, USGS, Denver. Approximately 2.6 man years were devoted to the Clinton/Medina project in FY1995. A continuous-type gas accumulation, referred to in the project, is a new term introduced by Schmoker (1995a) to identify those natural gas accumulations whose reservoirs are charged throughout with gas over a large area and whose entrapment does not involve a downdip gas-water contact. Gas in these accumulations is located downdip of the water column and, thus, is the reverse of conventional-type hydrocarbon accumulations. Commonly used industry terms that are more or less synonymous with continuous-type gas accumulations include basin- centered gas accumulation (Rose and others, 1984; Law and Spencer, 1993), tight (low-permeability) gas reservoir (Spencer, 1989; Law and others, 1989; Perry, 1994), and deep basin gas (Masters, 1979, 1984). The realization that undiscovered gas in Lower Silurian sandstone reservoirs of the Appalachian basin probably occurs in a continuous accumulation rather than in conventionally trapped, discrete accumulations represents a significant departure from the 1989 National Assessment (Mast and others, 1989; deWitt, 1993). In 1989, a direct assessment (field-size distributions required for play analysis were unavailable) of the Lower Silurian sandstone play gave, at a mean value, about 1.7 TCF of gas. The 1995 estimate (~30 TCF of gas) is so much greater than the 1989 estimate (~1.7 TCF of gas) because of the interpreted continuous nature of the accumulation and the assessment methodology applied. The methodology for continuous hydrocarbon accumulations assumes that the reservoirs in the accumulation are gas-saturated and takes into account: 1) estimated ultimate recovery (EUR) per well probability distributions, 2) optimum area that a well can drain (spacing), 3) number of untested drill sites having the appropriate spacing area, 4) success ratio of previously drilled holes, and 5) risk (Schmoker, 1995b). Davis (1984), Zagorski (1988, 1991), and Law and Spencer (1993) were among the first petroleum geologists to suggest that gas in the 'Clinton' sands and Medina Group sandstones was trapped in a basin-centered/deep basin accumulation. They recognized many of the earmarks of a basin-centered/deep basin accumulation such as low-permeability reservoirs, abnormally low formation pressure, coalesced gas fields, gas shows or production in most holes drilled, low water yields, and a general lack of structural control on entrapment. Ryder (1995) adopted this interpretation by defining four continuous-type gas plays (6728-6731) in the 'Clinton' sands-Medina Group interval (fig.1). Play 6728 (Clinton/Medina sandstone gas high potential) covers a 17,000 sq mi region of western New York, northwestern Pennsylvania, eastern Ohio, and a small part of westernmost West Virginia that is very favorable for future gas resources (fig.1). Also, this play includes a l

Open-File Report↗
USGS1991

Facies development in the Lower Freeport coal bed, west-central Pennsylvania, U.S.A.

The Lower Freeport coal bed in west-central Pennsylvania is interpreted to have formed within a lacustrine-mire environment. Conditions of peat formation, caused by the changing chemical and physical environments, produced five coal facies and two mineral-rich parting facies within the coal bed. The coal bed facies are compositionally unique, having developed under varying conditions, and are manifested by megascopic, petrographic, palynologic and quality characteristics. The initial environment of the Lower Freeport peat resulted in a coal facies that is relatively high in ash yield and contains large amounts of lycopod miospores and moderate abundances of cryptotelinite, crypto-gelocollinite, inertinite and tree fern miospores. This initial Lower Freeport peat is interpreted to have been a topogenous body that was low lying, relatively nutrient rich (mesotrophic to eutrophic), and susceptible to ground water and to sediment influx from surface water. The next facies to form was a ubiquitous, clay-rich durain parting which is attributed to a general rise in the water table accompanied by widespread flooding. Following formation of the parting, peat accumulation resumed within an environment that inhibited clastic input. Development of doming in this facies restricted deposition of the upper shale parting to the margins of the mire and allowed low-ash peat to form in the interior of the mire. Because this environment was conducive to preservation of cellular tissue, this coal facies also contains large amounts of crypto-telinite. This facies development is interpreted to have been a transitional phase from topogenous, planar peat formation to slightly domed, oligotrophic (nutrient-poor) peat formation. As domed peat formation continued, fluctuations in the water table enabled oxidation of the peat surface and produced high inertinite concentrations toward the top of the coal bed. Tree ferns became an increasingly important peat contributor in the e upper facies, based on the palynoflora. This floral change is interpreted to have resulted from the peat surface becoming less wet or better drained, a condition that inhibited proliferation of lycopod trees. Accumulation of the peat continued until rising water levels formed a freshwater lake within which clays and silts were deposited. The development of the Lower Freeport peat from a planar mire through transitional phases toward domed peat formation may be an example of the type of peat formation of other upper Middle and Upper Pennsylvanian coal beds.

International Journal of Coal Geology↗
USGS1989

Tectonostratigraphic terranes and their Paleozoic boundaries in the central and southern Appalachians

Parts of the central and southern Appalachian orogen appear to have evolved away from Proterozoic North America (Laurentia) and to have been accreted to it during the Paleozoic orogenies that collectively formed the orogen. Identifying each tectonostratigraphic terrane is a necessary step in understanding the evolution of the orogen. The terranes in the central and southern Appalachians are delineated, interpreted, and classified with varying degrees of confidence as: (1) Laurentian native terranes , (2) internal continental terranes of the Appalachian orogen, (3) disrupted terranes , (4) possible oceanic crustal remnants, (5) volcanic-arc terranes , (6) a continental terrane of Gondwanaland affinity, and (7) metamorphic complexes of undetermined affinity. The Laurentian native terranes consist of external massifs of Laurentian basement (Grenvillian and older), their rift- and shelf-facies cover rocks, and slope-rise prism deposits. External massifs are present in the Blue Ridge tectonic province, Reading Prong, and Honey Brook Upland. Rocks of the Talladega block are stratigraphically tied to Laurentia and, with the possible exception of the Hillabee greenstone, are also considered native. Offshore, deep-water, post-rift deposits of the Hamburg and Westminster terranes have no direct stratigraphic ties to Laurentia and are considered discrete native (not suspect) terranes . The internal continental terranes of the Appalachian orogen are isolated massifs of Middle Proterozoic (Grenvillian) continental basement and their cover sequences that occur within the metamorphic core of the orogen. These terranes , the Baltimore, Sauratown, and Pine Mountain terranes , could be either structurally isolated outliers of Laurentia or microcontinental fragments of Laurentian crust displaced by rifting or transcurrent faulting and later reassembled. Disrupted terranes in the central and southern Appalachians contain mélange complexes as well as more coherent terrane fragments (volcanic, ophiolitic, or continental) intermingled with the mélange complexes. Those identified include the Jefferson, Potomac, Smith River, Inner Piedmont, Falls Lake, Juliette, and Sussex terranes . The Bel Air-Rising Sun terrane (Baltimore Complex) in Maryland and Pennsylvania is the only terrane named separately as a possible oceanic crustal remnant. Similar mafic and ultramafic complexes are present in all of the disrupted terranes , but are too small to consider as separate terranes . Volcanic-arc terranes include the Chopawamsic, Carolina, Spring Hope, Roanoke Rapids, and Charleston terranes . The only terrane recognized as a continental terrane of Gondwanaland affinity is the Suwannee terrane , which contains rocks believed to correlate with those now exposed in west Africa. Metamorphic complexes of undetermined affinity are terranes that could not be clearly classified on the basis of available data. These include the Milton, Gaffney, Uchee, Crabtree, Goochland, Wilmington, and Hatteras terranes . The Penobscottian, Taconian, Acadian, and Alleghanian Paleozoic compressional events collectively assembled the various terranes into what is now the Appalachian orogen. Only the central and southern parts of the U.S. Appalachians are considered here. The Penobscottian orogeny, about 550 to 490 Ma, amalgamated the Potomac, the Chopawamsic, probably the Bel Air-Rising Sun, and possibly other exotic terranes at some unknown distance from Laurentia. This was followed by the Taconian orogeny, about 470 to 440 Ma, which accreted the previously amalgamated terranes and probably other terranes such as the Carolina terrane to Laurentia. The younger age limit for the Taconian event is partly constrained by Middle and Late Ordovician faunal assemblages in successor basin deposits of the Arvonia Slate and Quantico Formation. The significance of the Acadian orogeny, dated about 400 to 380 Ma in New England, is unclear in the central and southern Appalachians . In the Talladega block of Alabama and Georgia, an Early to Middle Devonian dynamothermal event is firmly bracketed between Early Devonian fossils and K-Ar ages that indicate a thermal peak no later than Middle Devonian time. A regional tectonothermal event and faulting of approximately this age are also suggested by isotopic studies in terranes to the east. The late Paleozoic (Alleghanian) continental collision between Laurentia and Gondwanaland, which formed the supercontinent Pangea, marks the final stage of accretionary history in the Appalachian -Caledonide orogen. Effects evident in the central and southern Appalachian region include: (1) the accretion of the Suwannee terrane and perhaps the Charleston terrane to what is now North America, (2) slicing and shifting of terranes along dextral strike-slip faults, particularly in the eastern Piedmont, (3) westward transport of native and previously accreted terranes in the western Piedmont and Blue Ridge as part of a composite crystalline thrust sheet, (4) deposition of clastic wedges in the Appalachian foreland, and (5) imbricate thrusting and folding of the resultant strata in the Valley and Ridge Province.

Appalachians↗
USGS1990

National water summary 1987: Hydrologic events and water supply and use

Water use in the United States, as measured by freshwater withdrawals in 1985, averaged 338,000 Mgal/d (million gallons per day), which is enough water to cover the 48 conterminous States to a depth of about 2.4 inches. Only 92,300 Mgal/d, or 27.3 percent of the water withdrawn, was consumptive use and thus lost to immediate further use; the remainder of the withdrawals (72.7 percent) was return flow available for reuse a number of times as the water flowed to the sea. The 1985 freshwater withdrawals were much less than the average 30 inches of precipitation that falls on the conterminous States each year; consumptive use accounted for only 7 percent of the estimated annual runoff of 1,230,000 Mgal/d. Nonetheless, as the State summaries on water supply and use clearly show, water is not always available when and where it is needed. Balancing water demands with available water supplies constitutes one of the major resource allocation issues that will face the United States in the coming decade. Of the 1985 freshwater withdrawals, 78.3 percent (265,000 Mgal/d) came from surface-water sources (streams and lakes), and 21.7 percent (73,300 Mgal/d) came from ground water. Surface water provided drinking water for about 47 percent of the Nation's total population. It was the source of 59.9 percent of the Nation's public-supply systems. For self-supplied withdrawals, surface water accounted for 1.6 percent of the domestic and commercial uses; 64.0 percent of the industrial and mining use; 99.4 percent of the thermoelectric generation withdrawals, mainly for cooling water; and 65.6 percent of the agricultural withdrawals. Eight States accounted for 43 percent of the surface-water use; California, Colorado, and Idaho used surface water primarily for irrigation, and Dlinois, Michigan, Ohio, Pennsylvania, and Texas used surface-water primarily for cooling condensers or reactors in thermoelectric plants. Ground water provided drinking water for 53 percent of the Nation's total population and nearly all the rural population. It was the source of 40.1 percent of the public-supply systems withdrawals. For self-supplied withdrawals, ground water accounted for 11.3 percent of the domestic and commercial use, 17.3 percent of the industrial and mining withdrawals, less than 1 percent of the thermoelectric generation withdrawals, and 34.4 percent of the agricultural withdrawals (irrigation and livestock). Eight States Arizona, Arkansas, California, Florida, Idaho, Kansas, Nebraska, and Texas accounted for 66 percent of the ground water used. In each of those States, as in many other States, irrigation was the major use of ground water. Each offstream-use category described in the State summaries public supply, domestic and commercial, industrial and mining, thermoelectric power, and agriculture (irrigation and livestock) followed its own geographic pattern as described below. Consumptive use of water effectively removes the water from immediate further use downstream of the withdrawal point. Of the total amount of consumptive water use in 1985, agricultural use accounted for about 82.5 percent. More than one-half (53 percent) of irrigation water is consumptively used by evapotranspiration or is incorporated into the crop. This is a good indication of the effect that irrigated agriculture can have in a river basin where irrigation is a major activity. The availability of return flows for reuse depends largely on where the water reenters the system. If the return flows are discharged to a stream, they usually can be reused; if they are discharged to a saltwater estuary, they are effectively lost to further use because of water-quality degradation just as if the water had been consumptively used. Similarly, water that recharges a highly transmissive aquifer can be available for reuse either through pumpage from a well or as discharge to a local stream. Thus, much of the water withdrawn for different uses can and does become available for further use although the quality might degrade with each additional use. The allocation and the management of water resources are the responsibilities of the individual States and water institutions within the States. These institutions are evolving in response to the challenges of water management problems. As the individual State summaries indicate, recent State legislation deals with facilitating water transfers within the States as a means of reducing imbalances between water supplies and use, with emphasizing water conservation in times of drought and at places where groundwater depletion is a problem of long standing, and with reducing threats to public health and the environment from water pollution. Most of the State summaries indicate the expectation that water use will continue to increase in the future and that water contamination will continue to be a major water concern. Both issues will require increasingly intensive water management in the future. Whether the water resources under management are considered to be fully appropriated or over appropriated, as in some Western States, or whether the resource could support additional development, as is the situation in most States, improved water-use information will play a key role in future water management efforts.

Water Supply Paper↗