Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS2010

EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

Data Series↗
USGS2010

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS1982

The depositional environment and petrology of the White Rim Sandstone Member of the Permian Cutler Formation, Canyonlands National Park, Utah

The White Rim Sandstone Member of the Cutler Formation of Permian age in Canyonlands National Park, Utah, was deposited in coastal eolian and associated interdune environments. This conclusion is based on stratigraphic relationships primary sedimentary structures, and petrologic features. The White Rim consists of two major genetic units. The first represents a coastal dune field and the second represents related interdune ponds. Distinctive sedimentary structures of the coastal dune unit include large- to medium-scale, unidirectional, tabular-planar cross-bedding; high-index ripples oriented parallel to dip direction of the foresets; coarse-grained lag layers; avalanche or slump marks; and raindrop impressions. Cross-bedding measurements suggest the dunes were deposited as transverse ridges by a dominantly northwest to southeast wind. Distinctive sedimentary structures of the interdune pond unit include wavy, horizontally laminated bedding, adhesion ripples, and desiccation polygons. These features may have been produced by alternate wetting and drying of sediment during water-table fluctuations. Evidence of bioturbation is also present in this unit. Petrologic characteristics of the White Rim helped to define the depositional environment as coastal. A crinoid fragment was identified at one location; both units are enriched in heavy minerals, and small amounts of well rounded, reworked glauconite were found in the White Rim throughout the study area. Earlier work indicates that the White Rim sandstone is late Wolfcampian to early Leonardian in age. During this time, the Canyonlands area was located in a depositional area alternately dominated by marine and nonmarine environments. Results of this study suggest the White Rim represents a coastal dune field that was deposited by predominantly on-shore winds during a period of marine transgression.

Open-File Report↗
USGS1972

Geological framework of the south polar region of Mars

The first 4 months of Mariner 9 photography of the south polar region are discussed. Three major geological units have been recognized, separated by erosional unconformities. From oldest to youngest they are: cratered terrain, pitted plains, and laminated terrain. The latter unit is unique in occurrence to the polar region, volatiles are probably involved in its origin, and may still be present within the laminated terrain as layered ice. The residual south polar cap has been observed to survive the disappearance of the thin annual CO 2 frost deposit and to last virtually unchanged in outline through the southern summer. That exposed deposit is inferred to be composed of water-ice. The residual cap appears to lie at the apex of an unusual quasi-circular structure composed of laminated terrain; a similar structure also appears to exist near the north pole.

Icarus↗
USGS2016

Controls on ferromanganese crust composition and reconnaissance resource potential, Ninetyeast Ridge, Indian Ocean

A reconnaissance survey of Fe-Mn crusts from the 5000 km long (~31°S to 10°N) Ninetyeast Ridge (NER) in the Indian Ocean shows their widespread occurrence along the ridge as well as with water depth on the ridge flanks. The crusts are hydrogenetic based in growth rates and discrimination plots. Twenty samples from 12 crusts from 9 locations along the ridge were analyzed for chemical and mineralogical compositions, growth rates, and statistical relationships (Q-mode factor analysis, correlation coefficients) were calculated. The crusts collected are relatively thin (maximum 40 mm), and those analyzed varied from 4 mm to 32 mm. However, crusts as thick as 80 mm can be expected to occur based on the age of rocks that comprise the NER and the growth rates calculated here. Growth rates of the crusts increase to the north along the NER and with water depth. The increase to the north resulted from an increased supply of Mn from the oxygen minimum zone (OMZ) to depths below the OMZ combined with an increased supply of Fe at depth from the dissolution of biogenic carbonate and from deep-sourced hydrothermal Fe. These increased supplies of Fe increased growth rates of the deeper-water crusts along the entire NER. Because of the huge terrigenous (rivers, eolian, pyroclastic) and hydrothermal (three spreading centers) inputs to the Indian Ocean, and the history of primary productivity, Fe-Mn crust compositions vary from those analyzed from open-ocean locations in the Pacific. The sources of detrital material in the crusts changed along the NER and reflect, from north to south, the decreasing influence of the Ganga River system and volcanic arcs located to the east, with increasing influence of sediment derived from Australia to the south. In addition, weathering of NER basalt likely contributed to the aluminosilicate fraction of the crusts. The southernmost sample has a relatively large detrital component compared to other southern NER crust samples, which was probably derived predominantly from weathering of local volcanic outcrops. Fe-Mn crusts from a dredge haul at 3412 m water depth, 2°S latitude, are pervasively phosphatized along with the substrate rocks (site D7). Phosphatization took place through replacement of carbonate, preferential replacement of Fe oxyhydroxide relative to Mn oxide in the crusts, preferential replacement of silica-rich phases relative to Al-rich phases in the crusts, and precipitation of carbonate fluorapatite in pore space. The preferentially replaced silica may have been Si adsorbed on the Fe oxyhydroxide. The enrichment of Ni, Zn, and Cu in the phosphatized crust reflects preferential adsorption into the tunnel structure of todorokite. The rare earth element plus yttrium (REY) patterns indicate a lower oxidation potential during phosphatization of the NER crusts compared to Pacific phosphatized crusts. NER phosphatization occurred in a deeper-water environment than typical for phosphatization of Pacific crusts, occurred post-middle Miocene, a younger age than phosphatization the Pacific crusts, and had in part a different set of chemical changes produced by the phosphatization than did the Pacific crusts. The southern third of NER has Fe-Mn crusts with the highest Co (0.91%), Ni (0.43%), ΣREY (0.33%), Cu (0.22%), Te (146 ppm), Pt (1.5 ppm), Ru (52 ppb), and Rh (99 ppb) contents. These are among the highest Pt, Ru, and Rh concentrations measured in marine Fe-Mn deposits. Because of these high metal concentrations, exploration is warranted for the southern sector of the NER, especially at shallower-water sites where the platinum group elements (PGE) and Co are likely to be even more enriched.

Deep-Sea Research Part I: Oceanographic Research P↗
USGS2002

Carboniferous Psammichnites: Systematic re-evaluation, taphonomy and autecology

The ichnogenus Psammichnites Torell 1870 includes a wide variety of predominantly horizontal, sinuous to looped, backfilled traces, characterized by a distinctive median dorsal structure. Though commonly preserved in full relief on upper bedding surfaces, some ichnospecies of Psammichnites may be preserved in negative hyporelief. Psammichnites records the feeding activities of a subsurface animal using a siphon-like device. Several ichnogenera reflect this general behavioral pattern, including Plagiogmus Roedel 1929 and the Carboniferous ichnogenera Olivellites Fenton and Fenton 1937a and Aulichnites Fenton and Fenton 1937b. Based on analysis of specimens from the United States, Spain, and the United Kingdom, three Carboniferous ichnospecies of Psammichnites are reviewed in this paper: P. plummeri (Fenton and Fenton, 1937a), P. grumula (Romano and Meléndez 1979), and P. implexus (Rindsberg 1994). Psammichnites plummeri is the most common Carboniferous ichnospecies and is characterized by a relatively straight, continuous dorsal ridge/groove, fine transverse ridges, larger size range, and non-looping geometric pattern. It represents a grazing trace of deposit feeders. Psammichnites grumula differs from the other ichnospecies of Psammichnites by having median dorsal holes or protruding mounds. The presence of mounds or holes in P. grumula suggests a siphon that was regularly connected to the sediment-water interface. This ichnospecies is interpreted as produced by a deposit feeder using the siphon for respiration or as a device for a chemosymbiotic strategy. Psammichnites implexus is characterized by its consistently smaller size range, subtle backfill structure, and tendency to scribble. Although displaying similarities with Dictyodora scotica , P. implexus is a very shallow-tier, grazing trace. Changes in behavioral pattern, preservational style, and bedform morphology suggest a complex interplay of ecological and taphonomic controls in Carboniferous tidal-flat Psammichnites . A first distributional pattern consists of guided meandering specimens preserved in ripple troughs, probably reflecting food-searching of buried organic matter concentrated in troughs. A second is recorded by concentration of Psammichnites on ripple crests and slopes. In some cases, the course is almost straight to slightly sinuous and closely follows topographic highs, suggesting a direct control of bedform morphology on trace pattern. Occurrences of Carboniferous Psammichnites most likely represent an opportunistic strategy in marginal-marine settings. Analysis of Carboniferous Psammichnites indicates the presence of a siphon-like device in the producer and reestablishes the possibility of a molluscan tracemaker.

Ichnos: An International Journal for Plant and Ani↗
USGS1996

Application of ground-penetrating radar to investigation of near-surface fault properties in the San Francisco Bay region

In many geologic environments, ground-penetrating radar (GPR) provides high-resolution images of near-surface Earth structure. GPR data collection is nondestructive and very economical. The scale of features detected by GPR lies between those imaged by high-resolution seismic reflection surveys and those exposed in trenches and is therefore potentially complementary to traditional techniques for fault location and mapping. Sixty-two GPR profiles were collected at 12 sites in the San Francisco Bay region. Results show that GPR data correlate with large-scale features in existing trench observations, can be used to locate faults where they are buried or where their positions are not well known, and can identify previously unknown fault segments. The best data acquired were on a profile across the San Andreas fault, traversing Pleistocene terrace deposits south of Olema in Marin County; this profile shows a complicated multi-branched fault system from the ground surface down to about 40 m, the maximum depth for which data were recorded.

California↗
USGS2000

Geologic map of the MTM-15182 and MTM-15187 quadrangles, Gusev Crater-Ma'adim Vallis region, Mars

This map is one of a series of large-scale (1:500,000) geologic maps of Mars initiated by the National Aeronautics and Space Administration to investigate areas of high scientific interest. The Gusev crater–Ma’adim Vallis region includes several potential landing sites for future Mars missions, including those with a focus on exobiology studies and sample return. Channels in the map area span a long age range, cut ancient rocks that may contain important biogenic information, and funneled water into exobiologically important lacustrine basins. The map area is characterized by diverse geologic units representing a variety of endogenic and exogenic processes. The geologic history of this region spans the entire history of the planet. The base map was compiled from controlled pho-tomosaic maps of the Mars Transverse Mercator (MTM) –15182 and –15187 quadrangles (U.S. Geological Survey, 1992a, b). The map area is in the Aeolis re-gion, which was first mapped from Mariner 9 images at 1:5,000,000 scale (Scott and others, 1978) and at 1:25,000,000 scale (Scott and Carr, 1978). On the basis of Viking data, the area was later mapped at 1:15,000,000 scale (Greeley and Guest, 1987) and in part at 1:5,000,000 scale (Scott and Chapman, 1995). Recently, the area was mapped at 1:1,000,000 scale by Landheim (1995). This 1:500,000-scale map shows a great diversity of geologic materials and demonstrates a more complete understanding of fluvial processes in the highland plains, the evolution of Ma’adim Vallis, and sedimentation in Gusev crater and in de Vaucou-leurs, an ancient 300-km-diameter impact structure west of Gusev crater. Standard photogeologic mapping techniques elucidated by Wilhelms (1990) were used in this work. Viking Orbiter images used to map the area range in resolution from 63 to 70 m/pixel, with small patches at 225 m/pixel.

IMAP↗
USGS2004

Dispersal forcing of a southern California river plumes, based on field and remote sensing observations

River plumes are important pathways of terrestrial materials entering the sea. In southern California, rivers are known to be the dominant source of littoral, shelf and basin sediment and coastal pollution, although a basic understanding of the dynamics of these river inputs does not exist. Here we evaluate forcing parameters of a southern California river plume using ship-based hydrographic surveys and satellite remote sensing measurements to provide the first insights of river dispersal dynamics in southern California. Our results suggest that plumes of the Santa Clara River are strongly influenced by river inertia, producing jet-like structures ~10 km offshore during annual recurrence (~two-year) flood events and ~30 km during exceptional (~10-year recurrence) floods. Upwelling-favorable winds may be strong following stormwater events and can alter dispersal pathways of thse plumes. Due to similar runoff relationships and other reported satellite observations, we hypothesize that interia-dominated dispersal may be an important characteristic of the small, mountainous rivers throughout southern California.

California↗
USGS2007

An evaluation of selenium concentrations in water, sediment, invertebrates, and fish from the Solomon River Basin

The Solomon River Basin is located in north-central Kansas in an area underlain by marine geologic shales. Selenium is an indigenous constituent of these shales and is readily leached into the surrounding groundwater. Portions of the Basin are irrigated primarily through the pumping of selenium-contaminated groundwater from wells onto fields in agricultural production. Water, sediment, macroinvertebrates, and fish were collected from various sites in the Basin in 1998 and analyzed for selenium. Selenium concentrations were analyzed spatially and temporally and compared to reported selenium toxic effect thresholds for specific ecosystem components: water, sediments, food-chain organisms, and wholebody fish. A selenium aquatic hazard assessment for the Basin was determined based on protocol established by Lemly. Throughout the Basin, water, macroinvertebrate, and whole fish samples exceeded levels suspected of causing reproductive impairment in fish. Population structures of several fish species implied that successful reproduction was occurring; however, the influence of immigration of fish from low-selenium habitats could not be discounted. Site-specific fish reproduction studies are needed to determine the true impact of selenium on fishery resources in the Basin. ?? Springer Science+Business Media B.V. 2007.

Environmental Monitoring and Assessment↗
USGS1986

Ascension Submarine Canyon, California - Evolution of a multi-head canyon system along a strike-slip continental margin

Ascension Submarine Canyon, which lies along the strike-slip (transform) dominated continental margin of central California, consists of two discrete northwestern heads and six less well defined southeastern heads. These eight heads coalesce to form a single submarine canyon near the 2700 m isobath. Detailed seismic stratigraphic data correlated with 19 rock dredge hauls from the walls of the canyon system, suggest that at least one of the two northwestern heads was initially eroded during a Pliocene lowstand of sea level ∼3.8 m.y. B.P. Paleogeographic reconstructions indicate that at this time, northwestern Ascension Canyon formed the distal channel of nearby Monterey Canyon and has subsequently been offset by right-lateral, strike-slip faulting along the San Gregorio fault zone. Some of the six southwestern heads of Ascension Canyon may also have been initially eroded as the distal portions of Monterey Canyon during late Pliocene-early Pleistocene sea-level lowstands (∼2.8 and 1.75 m.y. B.P.) and subsequently truncated and offset to the northwest. There have also been a minimum of two canyon-cutting episodes within the past 750,000 years, after the entire Ascension Canyon system migrated to the northwest past Monterey Canyon. We attribute these late Pleistocene erosional events to relative lowstands of sea level 750,000 and 18,000 yrs B.P. The late Pleistocene and Holocene evolution of the six southeastern heads also appears to have been controlled by structural uplift of the Ascension-Monterey basement high at the southeastern terminus of the Outer Santa Cruz Basin. We believe that uplift of this basement high sufficiently oversteepened submarine slopes to induce gravitational instability and generate mass movements that resulted in the erosion of the canyon heads. Most significantly, though, our results and interpretations support previous proposals that submarine canyons along strike-slip continental margins can originate by tectonic trunction and lateral offset.

California↗
USGS2010

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS1988

Geologic map of the northwestern Caliente Range, San Luis Obispo County, California

The map area lies in the southern Coast Ranges of California, north of the Transverse Ranges and west of the southern San Joaquin Valley. This region is part of the Salinia-Tujunga composite terrane that is bounded on the northeast by the San Andreas fault (fig. 1) and on the southwest by the Nacimiento fault zone (Vedder and others, 1983). The Chimineas fault of this map is inferred to be the boundary between the Salinia and the Tujunga terranes (Ross, 1972; Vedder and others, 1983). Geologic mapping in the region of the California Coast Ranges that includes the area of this map has been largely the work of T.W. Dibblee, Jr. Compilations of geologic mapping at a scale of 1:125,000 (Dibblee, 1962, 1973a) provide the regional setting for this map, the northeast border of which lies about 6 to 7 km southwest of the San Andreas fault. Ross (1972) mapped the crystalline basement rocks in the vicinity of Barrett Creek, along the northeast side of the Chimineas fault ("Barrett Ridge" of Ross, 1972). Recent 1:24,000-scale mapping in the La Panza Range (fig. 1) (Vedder and others 1986a,b) overlaps onto the southwest edge of this map and provides useful information about the older rocks, mostly southwest of San Juan Creek. Stratigraphic knowledge of the area, which lies in the northern part of the middle Tertiary Cuyama basin, has evolved over a period of years beginning with the molluscan biostratigraphic work of Anderson and Martin (1914) and Loel and Corey (1932). Hill and others (1958) described the Tertiary stratigraphy of the region and proposed stratigraphic names. This stratigraphy was discussed further by Dibblee (1973b), and his revised nomenclature is used here. Stratigraphic studies in the southeastern Caliente Range (fig. 1) (Repenning and Vedder, 1961; Vedder, 1973) provided valuable information on the interrelations of continental, shallow-marine, and deeper marine facies in the southern part of the Cuyama basin, which have basinwide application. More recent stratigraphic studies by Lagoe (1984, 1985, 1987, 1988) further elaborate on aspects of Miocene basin history and paleogeography. Contributions to the tectonic history of the area have been made by Schwade and others (1958), on the basis of oil exploration in the Cuyama Valley area (fig. 1) in the 1940's and 1950's; by Bartow (1974), as part of a regional stratigraphic study; by Ballance and others (1983), on the basis of a study of Oligocene and early Miocene sedimentation; and most recently by Davis and others (1988) and Yeats and others (1988), who utilized a variety of new data from seismic reflection and from stratigraphic and structural studies. Field work for this map was done mostly in 1969-73 as part of a regional study of the Simmler and Vaqueros Formations (Bartow, 1974). Detailed field mapping was, therefore, concentrated on those units; other parts of the area were mapped by geologic reconnaissance and air-photo interpretation that were supplemented by data from published maps (Dibblee, 1973a; Vedder and others, 1986a,h). Mapping of the crystalline basement rocks at "Barrett Ridge" is from Ross (1972, plate 1). The structural style depicted in the accompanying cross sections favors the thrust belt concepts of Davis and others (1988) over the older interpretations of Dibblee (1962) or Cross (1962).

California↗
USGS2009

The morphology and distribution of submerged reefs in the Maui-Nui Complex, Hawaii: New insights into their evolution since the Early Pleistocene

Reef drowning and backstepping have long been recognised as reef responses to sea-level rise on subsiding margins. During the Late Pleistocene (~500–14 ka) Hawaiian reefs grew in response to rapid subsidence and 120 m 100 kyr sea-level cycles, with recent work on the submerged drowned reefs around the big island of Hawaii, and in other locations from the last deglacial, providing insight into reef development under these conditions. In contrast, reefs of the Early Pleistocene (~1.8–0.8 Ma) remain largely unexplored despite developing in response to significantly different 60–70 m 41 kyr sea-level cycles. The Maui-Nui Complex (MNC — forming the islands of Maui, Molokai, Lanai and Kahoolawe), provides a natural laboratory to study reef evolution throughout this time period as recent data indicate the reefs grew from 1.1 to 0.5 Ma. We use new high resolution bathymetric and backscatter data as well as sub-bottom profiling seismic data and field observations from ROV and submersible dives to make a detailed analysis of reef morphology and structure around the MNC. We focus specifically on the south-central region of the complex that provides the best reef exposure and find that the morphology of the reefs varies both regionally and temporally within this region. Barrier and pinnacle features dominate the steeper margins in the north of the study area whilst broad backstepping of the reefs is observed in the south. Within the Au'au channel in the central region between the islands, closely spaced reef and karst morphology indicates repeated subaerial exposure. We propose that this variation in the morphology and structure of the reefs within the MNC has been controlled by three main factors; the subsidence rate of the complex, the amplitude and period of eustatic sea-level cycles, and the slope and continuity of the basement substrate. We provide a model of reef development within the MNC over the last 1.2 Ma highlighting the effect that the interaction of these factors had on reef morphology.

Hawai'i↗
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗
USGS2009

Internal tidal currents in the Gaoping (Kaoping) Submarine Canyon

Data from five separate field experiments during 2000-2006 were used to study the internal tidal flow patterns in the Gaoping (formerly spelled Kaoping) Submarine Canyon. The internal tides are large with maximum interface displacements of about 200??m and maximum velocities of over 100cm/s. They are characterized by a first-mode velocity and density structure with zero crossing at about 100??m depth. In the lower layer, the currents increase with increasing depth. The density interface and the along-channel velocity are approximately 90?? out-of-phase, suggesting a predominant standing wave pattern. However, partial reflection is indicated as there is a consistent phase advance between sea level and density interface along the canyon axis. ?? 2008 Elsevier B.V. All rights reserved.

Journal of Marine Systems↗
USGS1992

An aeromagnetic survey over the northwestern Ross Ice Shelf and the McMurdo Sound area

As part of the expedition GANOVEX VI 1990/91, the Bundesanstalt für Geowissenschaften und Rohstoffe (BGR), the Alfred Wegener Institute for Polar and Marine Research (AWI), and the United States Geological Survey (USGS) carried out an airborne magnetic survey over the northwestern Ross Ice Shelf and McMurdo Sound between Ross Island, the Transantarctic Mountains, and Minna Bluff. The area planned for the aeromagnetic survey connects directly with the GANOVEX IV survey area (BGR & USGS 1987, BACHEM et al. 1989a) which terminated along an approximately cast-west line at about the latitude of Cape Bird. The GANOVEX IV survey covered the Victoria Land Basin - which is the westernmost of the three north/south striking basins in the Ross Sea - from its northern end in the Terra Nova Bay region to its known southern end at Ross Island. A possible southem extension of the Victoria Land Basin and its central graben structure (the Terror Rift as found from seismic surveys (COOPER et al. 1987) and what has been referred to as Victoria Graben in the aeromagnetic interpretation of the GANOVEX IV data (BOSUM et al. 1989) was one of the major targets for this survey. The survey was laid out in the form of blocks. A 135 km wide transect from the Transantarctic Mountains to about 175° W formed the focal block of the survey (Fig. 1) in which all major scientific objectives could be covered. Other survey blocks were planned to the south of this. During the course of the survey it turned out that in the time available no further area could be covered. Indeed, the unfavourable weather conditions made it impossible to complete even the above described main section fully. In detail, the lay-out of the survey area was closely following that of the GANOVEX IV survey to assure compatibility and direct continuation between the two data sets. The line spacing was chosen again to 4.4 km with a tic-line separation of 22 km. The survey altitude of 2,000 ft (610 m) corresponds to that of the Ross Sea section of the GANOVEX IV survey to which this survey area is directly adjacent. The profile lines were aligned approximately E-W, the tie-lines N-S. As part of the survey area is covered by the maps of the USGS Antarctica Reconnaissance Series 1:250,000 the Lambert conformal conic projection used for these maps was also used for the preparation of a flight line grid.

Polarforschung↗