SEARCH · Geology Reports

Results for “Information Systems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS2012

Flood-inundation maps for the Saddle River from Rochelle Park to Lodi, New Jersey, 2012

Digital flood-inundation maps for a 2.75-mile reach of the Saddle River from 0.2 mile upstream from the Interstate 80 bridge in Rochelle Park to 1.5 miles downstream from the U.S. Route 46 bridge in Lodi, New Jersey, were created by the U.S. Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection (NJDEP). The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at Saddle River at Lodi, New Jersey (station 01391500). Current conditions for estimating near real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/nwis/uv?site_no=01391500 . The National Weather Service (NWS) forecasts flood hydrographs at many places that are often collocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relations at the Saddle River at Lodi, New Jersey streamgage and documented high-water marks from recent floods. The hydraulic model was then used to determine 11 water-surface profiles for flood stages at the Saddle River streamgage at 1-ft intervals referenced to the streamgage datum, North American Vertical Datum of 1988 (NAVD 88), and ranging from bankfull, 0.5 ft below NWS Action Stage, to the extent of the stage-discharge rating, which is approximately 1 ft higher than the highest recorded water level at the streamgage. Action Stage is the stage which when reached by a rising stream the NWS or a partner needs to take some type of mitigation action in preparation for possible significant hydrologic activity. The simulated water-surface profiles were then combined with a geographic information system 3-meter (9.84-ft) digital elevation model (derived from Light Detection and Ranging (LiDAR) data) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from USGS streamgages and forecasted stream stages from the NWS, provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

New Jersey↗

USGS2005

Elevations and Distances

Photographs and other images of the Earth taken from the air and from space show a great deal about the planet's landforms, vegetation, and resources. Aerial and satellite images, known as remotely sensed images, permit accurate mapping of land cover and make landscape features understandable on regional, continental, and even global scales. Transient phenomena, such as seasonal vegetation vigor and contaminant discharges, can be studied by comparing images acquired at different times. The U.S. Geological Survey (USGS), which began using aerial photographs for mapping in the 1930's, archives photographs from its mapping projects and from those of some other Federal agencies. In addition, many images from such space programs as Landsat, begun in 1972, are held by the USGS. Most satellite scenes can be obtained only in digital form for use in computer-based image processing and geographic information systems, but in some cases are also available as photographic products.

General Information Product↗

USGS2014

Large scale Wyoming transportation data: a resource planning tool

The U.S. Geological Survey Fort Collins Science Center created statewide roads data for the Bureau of Land Management Wyoming State Office using 2009 aerial photography from the National Agriculture Imagery Program. The updated roads data resolves known concerns of omission, commission, and inconsistent representation of map scale, attribution, and ground reference dates which were present in the original source data. To ensure a systematic and repeatable approach of capturing roads on the landscape using on-screen digitizing from true color National Agriculture Imagery Program imagery, we developed a photogrammetry key and quality assurance/quality control protocols. Therefore, the updated statewide roads data will support the Bureau of Land Management’s resource management requirements with a standardized map product representing 2009 ground conditions. The updated Geographic Information System roads data set product, represented at 1:4,000 and +/- 10 meters spatial accuracy, contains 425,275 kilometers within eight attribute classes. The quality control of these products indicated a 97.7 percent accuracy of aspatial information and 98.0 percent accuracy of spatial locations. Approximately 48 percent of the updated roads data was corrected for spatial errors of greater than 1 meter relative to the pre-existing road data. Twenty-six percent of the updated roads involved correcting spatial errors of greater than 5 meters and 17 percent of the updated roads involved correcting spatial errors of greater than 9 meters. The Bureau of Land Management, other land managers, and researchers can use these new statewide roads data set products to support important studies and management decisions regarding land use changes, transportation and planning needs, transportation safety, wildlife applications, and other studies.

Wyoming↗

USGS2009

Use of StreamStats in the Upper French Broad River Basin, North Carolina: A Pilot Water-Resources Web Application

StreamStats is a Web-based Geographic Information System (GIS) application that was developed by the U.S. Geological Survey (USGS) in cooperation with Environmental Systems Research Institute, Inc. (ESRI) to provide access to an assortment of analytical tools that are useful for water-resources planning and management. StreamStats allows users to easily obtain streamflow statistics, basin characteristics, and descriptive information for USGS data-collection sites and selected ungaged sites. StreamStats also allows users to identify stream reaches upstream and downstream from user-selected sites and obtain information for locations along streams where activities occur that can affect streamflow conditions. This functionality can be accessed through a map-based interface with the user's Web browser or through individual functions requested remotely through other Web applications.

North Carolina↗

USGS1986

Sediment-data sources and estimated annual suspended-sediment loads of rivers and streams in Colorado

Sources of sediment data collected by several government agencies through water year 1984 are summarized for Colorado. The U.S. Geological Survey has collected suspended-sediment data at 243 sites; these data are stored in the U.S. Geological Survey 's water data storage and retrieval system. The U.S. Forest Service has collected suspended-sediment and bedload data at an additional 225 sites, and most of these data are stored in the U.S. Environmental Protection Agency 's water-quality-control information system. Additional unpublished sediment data are in the possession of the collecting entities. Annual suspended-sediment loads were computed for 133 U.S. Geological Survey sediment-data-collection sites using the daily mean water-discharge/sediment-transport-curve method. Sediment-transport curves were derived for each site by one of three techniques: (1) Least-squares linear regression of all pairs of suspended-sediment and corresponding water-discharge data, (2) least-squares linear regression of data sets subdivided on the basis of hydrograph season; and (3) graphical fit to a logarithm-logarithm plot of data. The curve-fitting technique used for each site depended on site-specific characteristics. Sediment-data sources and estimates of annual loads of suspended, bed, and total sediment from several other reports also are summarized. (USGS)

Colorado↗

USGS1993

GIS mapping of earthquake ground shaking in San Francisco, California

Severe earthquakes of the last decade in Mexico, Armenia, and the United States have reemphasized the importance of local geologic site conditions in estimating damage and consequent losses. Recent advances in geographic information system (GIS) technology have created new opportunities for maintaining and integrating extensive spatial databases for applications in seismic hazard analysis. Ground motion data and damage distributions from past earthquakes are combined with GIS databases of geologic information to prepare preliminary maps for inferring input ground motion levels for earthquake resistant design. Maps of bedrock elevation, surface topography, and surface geology are used to develop maps of soil thickness and predominant period. Ground motion attenuation relationships are used to create maps estimating ground shaking intensity for a uniform ground condition. Relationships between geologic characteristics, ground motion amplification, and earthquake intensity are used to produce amplification capability maps. Estimated ground shaking for the uniform ground condition is combined with amplification capability to develop maps predicting regional ground shaking intensity. The methods of predictive GIS mapping described here are useful for estimating characteristics of input ground motion in many urbanized seismic regions of the world.

California↗

USGS2007

Cartographic production for the Florida Shelf Habitat (FLaSH) map study: generation of surface grids, contours, and KMZ files

The Florida shelf represents a finite source of economic resources, including commercial and recreational fisheries, tourism, recreation, sand and gravel resources, phosphate, and freshwater reserves. Yet the basic information needed to locate resources, or to interpret and utilize existing data, comes from many sources, dates, and formats. A multi-agency effort is underway to coordinate and prioritize the compilation of suitable datasets for an integrated information system of Florida’s coastal and ocean resources. This report and the associated data files represent part of the effort to make data accessible and useable with computer-mapping systems, web-based technologies, and user-friendly visualization tools. Among the datasets compiled and developed are seafloor imagery, marine sediment data, and existing bathymetric data. A U.S. Geological Survey-sponsored workshop in January 2007 resulted in the establishment of mapping priorities for the state. Bathymetry was identified as a common priority among agencies and researchers. State-of-the-art computer-mapping techniques and data-processing tools were used to develop shelf-wide raster and vector data layers. Florida Shelf Habitat (FLaSH) Mapping Project ( http://coastal.er.usgs.gov/flash ) endeavors to locate available data, identify data gaps, synthesize existing information, and expand our understanding of geologic processes in our dynamic coastal and marine systems.

Florida↗

USGS1994

White sturgeon spawning and rearing habitat in the lower Columbia River

Estimates of spawning habitat for white sturgeons Acipenser transmontanus in the tailraces of the four dams on the lower 470 km of the Columbia River were obtained by using the Physical Habitat Simulation System of the U.S. Fish and Wildlife Service's Instream Flow Incremental Methodology to identify areas with suitable water depths, water velocities, and substrates. Rearing habitat throughout the lower Columbia River was assessed by using a geographic information system to identify areas with suitable water depths and substrates. The lowering of spring and summer river discharges from hydropower system operation reduces the availability of spawning habitat for white sturgeons. The four dam tailraces in the study area differ in the amount and quality of spawning habitat available at various discharges; the differences are due to channel morphology. The three impoundments and the free-flowing Columbia River downstream from Bonneville Dam provide extensive areas that are physically suitable for rearing young-of-the-year and juvenile white sturgeons.

North American Journal of Fisheries Management↗

USGS1999

Computer Program for Point Location And Calculation of ERror (PLACER)

A program designed for point location and calculation of error (PLACER) was developed as part of the Quality Assurance Program of the Federal Highway Administration/U.S. Geological Survey (USGS) National Data and Methodology Synthesis (NDAMS) review process. The program provides a standard method to derive study-site locations from site maps in highwayrunoff, urban-runoff, and other research reports. This report provides a guide for using PLACER, documents methods used to estimate study-site locations, documents the NDAMS Study-Site Locator Form, and documents the FORTRAN code used to implement the method. PLACER is a simple program that calculates the latitude and longitude coordinates of one or more study sites plotted on a published map and estimates the uncertainty of these calculated coordinates. PLACER calculates the latitude and longitude of each study site by interpolating between the coordinates of known features and the locations of study sites using any consistent, linear, user-defined coordinate system. This program will read data entered from the computer keyboard and(or) from a formatted text file, and will write the results to the computer screen and to a text file. PLACER is readily transferable to different computers and operating systems with few (if any) modifications because it is written in standard FORTRAN. PLACER can be used to calculate study site locations in latitude and longitude, using known map coordinates or features that are identifiable in geographic information data bases such as USGS Geographic Names Information System, which is available on the World Wide Web.

Open-File Report↗

USGS2013

Geologic map of Chickasaw National Recreation Area, Murray County, Oklahoma

This 1:24,000-scale geologic map is a compilation of previous geologic maps and new geologic mapping of areas in and around Chickasaw National Recreation Area. The geologic map includes revisions of numerous unit contacts and faults and a number of previously “undifferentiated” rock units were subdivided in some areas. Numerous circular-shaped hills in and around Chickasaw National Recreation Area are probably the result of karst-related collapse and may represent the erosional remnants of large, exhumed sinkholes. Geospatial registration of existing, smaller scale (1:72,000- and 1:100,000-scale) geologic maps of the area and construction of an accurate Geographic Information System (GIS) database preceded 2 years of fieldwork wherein previously mapped geology (unit contacts and faults) was verified and new geologic mapping was carried out. The geologic map of Chickasaw National Recreation Area and this pamphlet include information pertaining to how the geologic units and structural features in the map area relate to the formation of the northern Arbuckle Mountains and its Arbuckle-Simpson aquifer. The development of an accurate geospatial GIS database and the use of a handheld computer in the field greatly increased both the accuracy and efficiency in producing the 1:24,000-scale geologic map.

Oklahoma↗

USGS2015

Flood-inundation maps for the Hoosic River, North Adams and Williamstown, Massachusetts, from the confluence with the North Branch Hoosic River to the Vermont State line

A series of nine digital flood-inundation maps were developed for an 8-mile reach of the Hoosic River in North Adams and Williamstown, Massachusetts, by the U.S. Geological Survey (USGS) in cooperation with the Federal Emergency Management Agency. The coverage of the maps extends from the confluence with the North Branch Hoosic River to the Vermont State line. Peak flows with 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities were computed for the reach from updated flood-frequency analyses. These peak flows were routed through a one-dimensional step-backwater hydraulic model to obtain the corresponding peak water-surface elevations, and to place the tropical storm Irene flood of August 28, 2011 into historical context. The hydraulic model was calibrated by using the current (2014) stage-discharge relation at the USGS streamgage Hoosic River near Williamstown, Massachusetts (01332500), and from documented high-water marks from the tropical storm Irene flood, which had approximately a 1-percent annual exceedance probability. The hydraulic model was used to compute water-surface profiles for flood stages referenced to the streamgage and ranging from 9 feet (ft; 624.45 ft North American Vertical Datum of 1988 [NAVD 1988]), which is near bankfull, to 16.1 ft (631.59 ft NAVD 1988), which exceeds the maximum recorded water level at the streamgage and the National Weather Service major flood stage of 13.0 ft. The mapped stages, 10.9 to 16.1 ft, were selected to match the stages of flows with annual exceedance probabilities between 20 and 0.2 percent, and thus do not fall at exact 1-ft increments. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data having a 0.5-ft vertical accuracy to create a set of flood-inundation maps. The availability of the flood-inundation maps, combined with information regarding current (near real-time) stage from USGS streamgage Hoosic River near Williamstown, and forecasted flood stages from the National Weather Service Advanced Hydrologic Prediction Service will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, and post-flood recovery efforts. The flood-inundation maps are nonregulatory, but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during selected peak-flow events.

Massachusetts↗

USGS2015

Flood-Inundation Maps for the North River in Colrain, Charlemont, and Shelburne, Massachusetts, From the Confluence of the East and West Branch North Rivers to the Deerfield River

A series of 10 digital flood-inundation maps were developed for a 3.3-mile reach of the North River in Colrain, Charlemont, and Shelburne, Massachusetts, by the U.S. Geological Survey in cooperation with the Federal Emergency Management Agency. The coverage of the maps extends from the confluence of the East and West Branch North Rivers to the Deerfield River. Peak-flow estimates at the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities were computed for the reach from updated flood-frequency analyses. These peak flows were routed through a one-dimensional step-backwater hydraulic model to obtain the corresponding peak water-surface elevations and to place the tropical storm Irene flood of August 28, 2011, into historical context. The hydraulic model was calibrated by using the current [2015] stage-discharge relation at the U.S. Geological Survey streamgage North River at Shattuckville, MA (station number 01169000), and from documented high-water marks from the tropical storm Irene flood, which had a peak flow with approximately a 0.2-percent annual exceedance probability. A hydraulic model was used to compute water-surface profiles for 10 flood stages referenced to the streamgage and ranging from 6.6 feet (ft; 464.5 ft North American Vertical Datum of 1988 [which is approximately bankfull]) to 18.3 ft (476.2 ft North American Vertical Datum of 1988 [which is the stage of the 0.2-percent annual exceedance probability peak flow and exceeds the maximum recorded water level at the streamgage and the National Weather Service major flood stage of 13.0 ft]. The mapped stages of 6.6 to 18.3 ft were selected to match the stages of flows for bankfull; the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities; and an incremental stage of 17.0 ft. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data with a 0.5-ft vertical accuracy to create a set of flood-inundation maps. The availability of the flood-inundation maps, combined with information regarding near-real-time stage from the U.S. Geological Survey North River at Shattuckville, MA streamgage can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory, but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during selected peak-flow events. Introduction

Massachusetts↗

USGS2016

Flood-inundation maps for the Green River in Colrain, Leyden, and Greenfield, Massachusetts, from U.S. Geological Survey streamgage 01170100 Green River near Colrain to the confluence with the Deerfield River

The U.S. Geological Survey developed flood elevations in cooperation with the Federal Emergency Management Agency for a 14.3-mile reach of the Green River in Colrain, Leyden, and Greenfield, Massachusetts, to assist landowners and emergency management workers to prepare for and recover from floods. The river reach extends from the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage downstream to the confluence with the Deerfield River. A series of seven digital flood inundation maps were developed for the upper 4.4 miles of the river reach downstream from the stream. Flood discharges corresponding to the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities were computed for the reach from updated flood-frequency analyses. These peak flows and the flood flows associated with the stages of 10.2, 12.4, and 14.4 feet (ft) at the Green River streamgage were routed through a one-dimensional step-backwater hydraulic model to obtain the corresponding peak water-surface elevations and to place the Tropical Storm Irene flood of August 28, 2011 (stage 13.97 ft), into historical context. The hydraulic model was calibrated by using the current (2015) stage-discharge relation at the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage and from documented high-water marks from the Tropical Storm Irene flood, which had a flow higher than a 0.2-percent annual exceedance probability flood discharge. The hydraulic model was used to compute water-surface profiles for flood stages referenced to the streamgage and ranging from the 50-percent annual exceedance probability (bankfull flow) at 7.6 ft (439.8 ft above the North American Vertical Datum of 1988 [NAVD 88]) to 14.4 ft (446.7 ft NAVD 88), which exceeds the maximum recorded water level of 13.97 ft (Tropical Storm Irene) at the streamgage. The mapped stages of 7.6 to 14.4 ft were selected to match the stages for bankfull; the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities; incremental stages of 10.2 and 12.4 ft; and the maximum stage of the stage-discharge rating curve. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data having a 0.5-ft vertical accuracy to create a set of flood-inundation maps. The availability of the flood-inundation maps, combined with information regarding near real-time stage from U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage, can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during selected peak-flow events.

Massachusetts↗

USGS2020

2020 Four-band aerial imagery testing and acquisition for 2020 land cover/land use mission

The aerial camera testing project lays the groundwork for the collection of aerial imagery that will be used in the creation of the next iteration of systemic land cover/land use data for the Upper Mississippi River System. Prior to acquisition in the summer of 2020, the new 4-band aerial camera will be assessed for image quality at various resolutions and be compared to the camera used for the 2010/2011 collection. Systemic aerial imagery has been acquired, and vegetation datasets derived from that imagery, by the Upper Mississippi River Restoration Program’s Long Term Resource Monitoring element on a decadal basis beginning in 1989 and follow-up imagery missions in 2000 and 2010/2011. Remote sensing and geographic information system technology has changed dramatically during this time, transitioning from a workflow based on 9-inch by 9-inch aerial film-based cameras to today’s 80-megapixel four-band digital camera. In addition to the camera testing, this report also provides historical information of previous aerial imagery acquisition efforts and how that process has continued to advance in the 30 years since the Program’s genesis.

Long Term Resource Monitoring Technical Report↗

USGS2001

User interface for ground-water modeling: Arcview extension

Numerical simulation for ground-water modeling often involves handling large input and output data sets. A geographic information system (GIS) provides an integrated platform to manage, analyze, and display disparate data and can greatly facilitate modeling efforts in data compilation, model calibration, and display of model parameters and results. Furthermore, GIS can be used to generate information for decision making through spatial overlay and processing of model results. Arc View is the most widely used Windows-based GIS software that provides a robust user-friendly interface to facilitate data handling and display. An extension is an add-on program to Arc View that provides additional specialized functions. An Arc View interface for the ground-water flow and transport models MODFLOW and MT3D was built as an extension for facilitating modeling. The extension includes preprocessing of spatially distributed (point, line, and polygon) data for model input and postprocessing of model output. An object database is used for linking user dialogs and model input files. The Arc View interface utilizes the capabilities of the 3D Analyst extension. Models can be automatically calibrated through the Arc View interface by external linking to such programs as PEST. The efficient pre- and postprocessing capabilities and calibration link were demonstrated for ground-water modeling in southwest Kansas.

Journal of Hydrologic Engineering↗

USGS2020

Inventory and analysis of groundwater resources: Theodore Roosevelt National Park, North Dakota

Industrial and commercial developments in western North Dakota potentially could affect the sources of water that contribute to wells, spring flow, and seeps within Theodore Roosevelt National Park. Without basic water resources data, accurately predicting the effects of water withdrawals and water quality concerns related to industrial and commercial developments near the park would be challenging. Water resources in the park include surface water and groundwater. The Little Missouri River and its tributaries cross all three Theodore Roosevelt National Park units and are the primary surface-water features in the park. Groundwater resources include well discharges, springs, and seeps. The geology and hydrogeology of Theodore Roosevelt National Park are defined by the surrounding Williston Basin. Four aquifers are sources of groundwater to the park: unconsolidated aquifers including alluvial systems, the upper Fort Union aquifer, the lower Fort Union aquifer, and the Fox Hills-lower Hell Creek aquifer. Data used for wells, springs, seeps, and water quality in this report were compiled from the U.S. Geological Survey National Water Information System or from the North Dakota State Water Commission. An inventory of 16 wells was completed for sites within the boundaries of the park. In addition to well data, an inventory of 11 springs and seeps was completed. The groundwater-quality analysis had two objectives: (1) to characterize the groundwater chemistry in aquifers underlying the park and (2) to spatially map selected physical properties and chemical constituents of interest. Groundwater-quality data from the North Dakota State Water Commission were summarized, mapped, and used to characterize groundwater for each aquifer in the study area. Spatial concentration distribution maps were constructed for selected physical properties and chemical constituents using summary statistics and exceedances. Piper diagrams were used to classify and characterize groundwater for each aquifer. Future research to help fill data gaps in water resources information for Theodore Roosevelt National Park, including recommendations from previous studies, consists of the following: (1) evaluating the variability in discharge from springs and seeps in comparison to changes in precipitation or other recharge sources, (2) evaluating flow control measures for flowing artesian wells, (3) completing a water rights review, and (4) performing routine water-quality monitoring for wells and springs.

North Dakota↗

USGS2023

Evaluation of threatened, endangered, and rare fish species and communities of the St. Lawrence River and its tributaries in the United States

Biodiversity is responsible for important ecological processes like productivity and ecosystem stability, and rare species are a major component of biodiversity. Rarity increases a species' vulnerability to disturbances and also makes them difficult to study. Globally, species of freshwater systems are some of the most threatened, and evaluation of rare freshwater species and their habitats is needed to help preserve natural flexibility and ecological function. We conducted an analysis of full fish communities of the upper St. Lawrence River and its major US tributaries, with the goals of determining species locations and abundances, associated environmental conditions, the distribution of distinct fish assemblages across the landscape (with emphasis on communities supporting rare species), and potential threats. From 2009 to 2015, the US Geological Survey (USGS) and Saint Regis Mohawk Tribe (SRMT) worked together using standardized methods to collect community samples within 4 different aquatic realms (shallow and deep lentic, and small and large lotic systems) and determine species-specific fish abundances, frequencies of occurrence, and associated habitat signatures and spatial distributions. Distinct fish assemblages and associated habitat conditions were objectively identified by multivariate and hypothesis-testing methods. We used a geographic information system (GIS) to spatially associate habitat, biotic, and landscape attributes within each stream reach throughout the study area, facilitating quantification of distribution patterns. Comparisons with historical data provided estimates of loss or gain of threatened and endangered species (T&E) colonies. We developed a disturbance index to highlight potential threats to aquatic species. More than 140,000 fishes of 87 species were collected from a total of 1140 sample sites, covering 278 stream reaches, including the endangered Notropis anogenus (Pugnose Shiner), and threatened Hiodon tergisus (Mooneye), Etheostoma pellucidum (Eastern Sand Darter), and Acipenser fulvescens (Lake Sturgeon). We identified 50 distinct fish assemblages differing in species composition, abundance, and/or diversity, but only 13 of those assemblages included a T&E species. The rareness, extent, and patchiness of fish assemblages created a mosaic of fish communities across the landscape, from headwaters to the mainstem of the St. Lawrence River. Comparisons with historic surveys (1978–2008) showed a stable number of T&E species colonies or an increase for some species. The geographic distribution of multimetric disturbance index values showed where combinations of disturbances to fish habitats might affect rare fish species and aquatic communities in the region. The species–habitat associations and fish assemblage distributions can be used for evaluation of species, communities, or habitats that may need protection or restoration.

St. Lawrence River study area↗

USGS2014

Development of flood-inundation maps for the Mississippi River in Saint Paul, Minnesota

Digital flood-inundation maps for a 6.3-mile reach of the Mississippi River in Saint Paul, Minnesota, were developed through a multi-agency effort by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers and in collaboration with the National Weather Service. The inundation maps, which can be accessed through the U.S. Geological Survey Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ and the National Weather Service Advanced Hydrologic Prediction Service site at http://water.weather.gov/ahps/inundation.php , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the U.S. Geological Survey streamgage at the Mississippi River at Saint Paul (05331000). The National Weather Service forecasted peak-stage information at the streamgage may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the Mississippi River by means of a one-dimensional step-backwater model. The hydraulic model was calibrated using the most recent stage-discharge relation at the Robert Street location (rating curve number 38.0) of the Mississippi River at Saint Paul (streamgage 05331000), as well as an approximate water-surface elevation-discharge relation at the Mississippi River at South Saint Paul (U.S. Army Corps of Engineers streamgage SSPM5). The model also was verified against observed high-water marks from the recent 2011 flood event and the water-surface profile from existing flood insurance studies. The hydraulic model was then used to determine 25 water-surface profiles for flood stages at 1-foot intervals ranging from approximately bankfull stage to greater than the highest recorded stage at streamgage 05331000. The simulated water-surface profiles were then combined with a geographic information system digital elevation model, derived from high-resolution topography data, to delineate potential areas flooded and to determine the water depths within the inundated areas for each stage at streamgage 05331000. The availability of these maps along with information regarding current stage at the U.S. Geological Survey streamgage and forecasted stages from the National Weather Service provides enhanced flood warning and visualization of the potential effects of a forecasted flood for the city of Saint Paul and its residents. The maps also can aid in emergency management planning and response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

Minnesota↗