Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Society of America Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS1999

Surface faulting and paleoseismic history of the 1932 Cedar Mountain earthquake area, west-central Nevada, and implications for modern tectonics of the Walker Lane

The 1932 Cedar Mountain earthquake (Ms 7.2) was one of the largest historical events in the Walker Lane region of western Nevada, and it produced a complicated strike-slip rupture pattern on multiple Quaternary faults distributed through three valleys. Primary, right-lateral surface ruptures occurred on north-striking faults in Monte Cristo Valley; small-scale lateral and normal offsets occurred in Stewart Valley; and secondary, normal faulting occurred on north-northeast-striking faults in the Gabbs Valley epicentral region. A reexamination of the surface ruptures provides new displacement and fault-zone data: maximum cumulative offset is estimated to be 2.7 m, and newly recognized faults extend the maximum width and end-to-end length of the rupture zone to 17 and 75 km, respectively. A detailed Quaternary allostratigraphic chronology based on regional alluvialgeomorphic relationships, tephrochronology, and radiocarbon dating provides a framework for interpreting the paleoseismic history of the fault zone. A late Wisconsinan alluvial-fan and piedmont unit containing a 32-36 ka tephra layer is a key stratigraphic datum for paleoseismic measurements. Exploratory trenching and radiocarbon dating of tectonic stratigraphy provide the first estimates for timing of late Quaternary faulting along the Cedar Mountain fault zone. Three trenches display evidence for six faulting events, including that in 1932, during the past 32-36 ka. Radiocarbon dating of organic soils interstratified with tectonically ponded silts establishes best-fit ages of the pre-1932 events at 4, 5,12,15, and 18 ka, each with ??2 ka uncertainties. On the basis of an estimated cumulative net slip of 6-12 m for the six faulting events, minimum and maximum late Quaternary slip rates are 0.2 and 0.7 mm/yr, respectively, and the preferred rate is 0.4-0.5 mm/yr. The average recurrence (interseismic) interval is 3600 yr. The relatively uniform thickness of the ponded deposits suggests that similar-size, characteristic rupture events may characterize late Quaternary slip on the zone. A comparison of event timing with the average late Quaternary recurrence interval indicates that slip has been largely regular (periodic) rather than temporally clustered. To account for the spatial separation of the primary surface faulting in Monte Cristo Valley from the epicenter and for a factor-of-two-to-three disparity between the instrumentally and geologically determined seismic moments associated with the earthquake, we hypothesize two alternative tectonic models containing undetected subevents. Either model would adequately account for the observed faulting on the basis of wrench-fault kinematics that may be associated with the Walker Lane. The 1932 Cedar Mountain earthquake is considered an important modern analogue for seismotectonic modeling and estimating seismic hazard in the Walker Lane region. In contrast to most other historical events in the Basin and Range province, the 1932 event did not occur along a major range-bounding fault, and no single, throughgoing basement structure can account for the observed rupture pattern. The 1932 faulting supports the concept that major earthquakes in the Basin and Range province can exhibit complicated distributive rupture patterns and that slip rate may not be a reliable criterion for modeling seismic hazard.

Geological Society of America Bulletin↗
USGS2000

Glacial and nonglacial sediment contributions to Wisconsin episode loess in the Central United States

The relative contributions of various glacial and nonglacial sediments to Wisconsin Episode loess units along the lower Illinois and central Mississippi Valleys are estimated on the basis of a comparison of magnetic susceptibility and silt and clay mineralogy. A mathematical method of source area calculation, using four compositional parameters, was guided by current knowledge of the regional glacial history. On the basis of this technique, the Roxana Silt, along the Illinois and Mississippi River Valleys, is composed of significant Superior lobe sediment (35%-40%) as well as Wadena or Des Moines lobe sediment (about 35%). This can account for its high magnetic susceptibility, feldspar content, kaolinite content, and pink hue. Lower Peoria Silt contains about 25%-35% Lake Michigan lobe sediment with reduced contributions of the other sources. After the Mississippi River's diversion (20.4 ka), the supply of Superior, Des Moines, and Wadena lobe sediment was cut off from the Illinois Valley in favor of Lake Michigan lobe sediment (75%- 80% contribution). This major source area shift accounts for higher dolomite and illite contents and a more yellow hue in approximately the upper two-thirds of Peoria Silt in the study area. In loess south of St. Louis, less pronounced compositional shifts occur because Superior lobe sediment was not cut off and because Des Moines lobe, Wadena lobe, and Missouri River sediments, having more intermediate composition, compose 40%-50% of the loess, thereby diluting other source area changes. Nonglacial sediment, from fluvial and periglacial sources, is estimated to compose 10%-40% of loess in both regions.

Illinois, Indiana, Iowa, Michigan, Minnesota, Nebr↗
USGS2011

Zircon U-Pb age of the Pescadero felsite: A late Cretaceous igneous event in the forearc, west-central California Coast Ranges

Downstream grain-size fining in stratigraphy is driven primarily by selective deposition of sediment, and the long-term efficiency of this process is determined by: (1) the magnitude and characteristics of the input sediment supply; (2) the spatial distribution of subsidence rate, which creates accommodation for sediment preservation; and (3) the dynamics of sediment transport and deposition. A key challenge is to determine how these first two factors control the caliber and spatial distribution of deposits over time scales of 10 4 –10 6 yr without incorporating sediment transport details that are largely unknowable for time-averaged stratigraphy in the geological past. We address this using grain-size data collected from fluvial conglomerates in the Eocene Pobla Basin, Spanish Pyrenees, a synorogenic basin where the timing of sediment deposition is well-constrained; the sediment budget is closed; and good exposure enables time lines within stratigraphy to be picked out unambiguously. For successive stratigraphic horizons, downstream trends in grain size and composition are derived for basin-filling sediment-routing systems with length scales of 6 and 40 km, respectively. Our data show that the rate of grain-size fining varies over time and with system length and can be linked to changes in source area. These results are contrasted with grain-size data from the Antist Group, a 60-km-long Oligocene system that mantles the Southern Pyrenees, where very slow rates of grain-size fining on the wedge top of this fold-and-thrust belt are observed. We apply a self-similarity–based selective deposition model to quantify the competing controls of tectonic subsidence and sediment supply on derived grain-size trends, and model results are compared with independent constraints on the Eocene–Oligocene evolution of the Pyrenees. Our results suggest that it is now possible to invert time-averaged grain-size trends in stratigraphy to gain quantitative information on the geological boundary conditions governing the evolution of sedimentary basins.

Geological Society of America Bulletin↗
USGS1960

Mineral paragenesis of precambrian rocks in the Tenmile Range, Colorado

A Precambrian complex of granulite, gneiss, and migmatite, intruded by numerous plutons of granitic rocks correlated with the Silver Plume granite, is exposed in a long narrow belt along the crest and upper slopes of the Tenmile Range , Colorado . The metamorphic rocks are predominantly felsic; bands, lenses, and irregular bodies of mafic rocks rich in biotite, hornblende, and locally in sillimanite and garnet, are interlayered with the felsic rocks . The major lithologic variations in the metamorphic rock complex are believed to be due chiefly to variations in the original sedimentary rocks , which probably were interbedded sandstone, shale, and limestone. The metamorphic rocks and the Silver Plume granite reveal the age relations of quartz and the feldspars, and these relations afford considerable information on the origin and progressive transformation of the rocks . Quartz is the earliest mineral in the metamorphic rocks and is probably a relict mineral of a sandstone. It has been partially replaced by feldspar. It occurs chiefly in irregular clusters, some of which show sutured grains, enclosed in a ramifying network of feldspar. Irregular small apophyses, barbs, and prongs of feldspar penetrate the quartz clusters along grain boundaries and healed fractures in the quartz. In some of the least feldspathized quartzose metamorphic rocks the feldspar is clearly interstitial to the quartz. Quartz also occurs in feldspar as small spherical inclusions. The relations of the quartz to the feldspars show clearly that a quartzose host rock was replaced by feldspar along quartz grain boundaries, pre-existing healed fractures, and margins of shadowy areas in strained quartz grains. The textural relations of the other principal minerals in the metamorphic rocks show that plagioclase formed earlier than the microcline and that the micas were the last of the principal minerals to form. Identical paragenetic relations are found in the Silver Plume granite, and the writer concludes that the Silver Plume granite was derived by partial fusion of quartzose metamorphic rocks .

Colorado↗
USGS1960

Glaciation of the east slope of Rocky Mountain National Park, Colorado

The eastern slope of Rocky Mountain National Park , Colorado , has been subjected to at least three separate Pleistocene glaciations, which from oldest to youngest are correlated with the Buffalo, Bull Lake, and Pinedale glaciations of Blackwelder in the Wind River Mountains of Wyoming. In this area, deposits of the oldest glaciation are known from only one locality. Deposits of the Bull Lake glaciation comprise two sets of moraines indicative of two advances of ice separated by a significant recession; those of the Pinedale glaciation comprise three sets of moraines indicative of a maximum advance of the ice and two recessional halts or minor readvances. Moraines of two minor advances of the ice, correlated with the Temple Lake and historic stades of Neoglaciation in the Wind River Mountains, occur in the cirque heads.

Colorado↗
USGS1960

Transcurrent faulting and volcanism in Owens Valley, California

In the Owens Valley region of California , volcanic activity of Cenozoic age was confined mainly to three areas near the ends of important faults. The volcanic eruptions seemingly took place in regions of relative tension, if the horizontal movement along these faults was left lateral. The deep depression of Owens Valley may have resulted from compression associated with left-lateral horizontal fault movement. The transfer of molten rock from beneath this deep depression laterally into the regions of tension and thence to the surface seems to account for the relief of abnormal stresses and the volume of the volcanic rocks.

California↗
USGS1960

Thickness and consolidation of deep-sea sediments: A discussion

Hamilton (1959) concluded that in most sediments excess pore-water pressure is equal to zero - that is, the hydrostatic pressure is at atmospheric pressure. This note points out that in terrestrial environments the occurrence of artesian water (excess pore-water pressure) is commonplace and widespread and that such excess pressure is the source of energy for flowing water wells and for many flowing oil wells, "gushers," or "blowouts".

Bulletin of the Geological Society of America↗
USGS1960

Geology of the Mayagüez area, Puerto Rico

The Mayagüez area forms the southwestern corner of Puerto Rico , west of 67° W. and south of 18° 15' N. One-third of the 640 square kms is covered by thick alluvium. Unconformities separate a basal complex, two sequences of highly folded igneous and sedimentary rocks, and a younger sequence of gently dipping sedimentary rock. The basal Bermeja complex contains serpentinite, silicified porphyritic volcanic rock with some sedimentary rock, and minor spilite, amphibolitized spilite, and amphibolite. It is exposed chiefly in some anticlinal cores in southwestern Puerto Rico . Limestone, mudstone, andesite, and basalt form the older folded sequence. The Río Loco formation, bronzite andesite porphyry in part with pillow structures, was extruded perhaps in the Cenomanian. The Mayagüez group includes most of the rocks in southwestern Puerto Rico : the Yauco mudstone, Parguera limestone, Brujo limestone, Melones limestone, Maricao basalt, Sabana Grande andesite, and El Rayo volcanic rocks. The maximum possible age range is Turonian to Maestrichtian. The group ranges in thickness from about 800 m in the south to 3800 m in the north, and it varies in lithology from limestone in the south to mudstone and volcanic rock in the north, indicating a volcanic center to the north during that time. The second folded sequence contains andesitic volcanic rock, bedded tuff, and massive limestone. The San Germán formation (Maestrichtian) includes andesite, the Cabo Rojo agglomerate member, and the Cotui limestone member. The Jicara formation, massive limestone and bedded tuff, is Paleocene; there is one exposure of an unnamed ? Eocene marl. Post-Eocene limestone and conglomerate are also exposed in the area . The structure of the basement complex is obscured by its massiveness and by the cover of younger rocks. Two major deformations have affected the rocks of southwestern Puerto Rico since Cenomanian to Santonian time. In the Maestrichtian, the first of these formed folds with a N. 60° W. trend, asymmetric or overturned to the south. Near the south coast the folding of thin Mayagüez group rocks was probably influenced by trends in the Bermeja complex which caused deviations in the regional trends and also some overturning to the north. The San Germán formation, deposited unconformably on the eroded surface of the folded Mayagüez group, contains large allochthonous blocks of older and contemporaneous rocks. These blocks, up to 2 km by 1 km in exposure, were deposited by slumping or sliding due to gravity within and at the base and top of the San Germán formation near Lajas and San Germán. Most rocks in the blocks are extremely contorted and contain deformed Foraminifera. The San Germán and Jicara formations and perhaps the ?Eocene marls were deformed into gentle open folds trending east in the area covered by this report. Oligocene, Miocene, and younger sedimentary rocks have been tilted and uplifted. Large east-west left-lateral transcurrent faults cross the area , offsetting and offset by two sets of transverse faults (N. 45° E., N. 20° W.): most faults are probably Maestrichtian to Oligocene, although minor faulting has continued to the present. Dikes and sills of quartz diorite porphyry and mica-quartz dacite porphyry intrude the ?Maestrichtian San Germán formation and older units. A diorite plug cuts the Bermeja complex, and a granodiorite plug intrudes the Mayagüez group.

Puerto Rico↗
USGS1960

Geophysical investigation of Mono Basin, California

Gravity and seismic studies in Mono Basin , Mono County, California , completed during the summer of 1957 revealed a large, roughly triangular block that had subsided about 18,000 ± 5000 feet and received an accumulation of about 300 ± 100 cubic miles of light clastic sediments and volcanic material of Cenozoic age. The seemingly near-vertical faults that bound this great block are displaced toward the center of the basin from the surrounding mountain masses, but in general they are parallel to well-defined Basin and Range trends. The gravity minimum anomaly associated with the Mono Basin structure has a residual gravity relief of about 50 mgals, and the lowest gravity readings (on Paoha Island) yield a complete Bouguer gravity value of about - 260 mgals with respect to the International Ellipsoid. The computed depth of subsidence is based on a density of 2.3 gms/ cm 3 for the basin fill and 2.7 gms/cm 3 for the basement rocks. Seismic-refraction profiles at several places in the basin demonstrate that the Cenozoic deposits are thick where the gravity is low and relatively thin where the gravity is higher. Along common seismic and gravity profiles steep seismic dips coincide with steep gravity gradients. Numerous seismic reflections are present within the basin fill. Anomalies on four aeromagnetic profiles are related in part to volcanic material within the Cenozoic section. It is concluded that Mono Basin may be a volcano-tectonic depression caused by subsidence along faults, following extrusion of magma from a magma chamber at depth. Volcanic rocks of Pliocene(?) and Pleistocene ages are exceptionally abundant in this area.

California↗
USGS1960

Foothills fault system, western Sierra Nevada, California

A large fault system , here named the Foothills fault system , is the dominant structural feature of the western Sierra Nevada . The steeply dipping to vertical component faults trend northwestward through an area about 200 miles long and 30 miles wide north of 37°30' north latitude. The faulted Paleozoic and Mesozoic rocks are overlapped by unfaulted younger rocks, and the total extent of the fault system is not known. It is probably not limited to the western Sierra Nevada . Faults are marked by belts as much as 4 miles wide of cataclastically deformed and recrystallized rocks and by truncated folds. Along one fault , Upper Jurassic rocks are juxtaposed against Paleozoic rocks for at least 100 miles. The direction of fault movement has not been determined. Net displacement on some of the component faults exceeds 3000 feet and may be measurable in miles. Major faults cut beds of Late Jurassic age and are in turn cut by plutonic rocks of probable Late Jurassic and Middle Cretaceous age. Faults that controlled deposition of quartz veins and gold ore bodies of the Mother Lode belt are apparently younger and structurally less important features superimposed on one of the fault zones of the large system .

California, Nevada↗
USGS1961

Origin and development of the Three Forks Basin, Montana

The Three Forks Basin sprawls where the intricately deformed sedimentary and volcanic rocks of the Disturbed Belt along the Rocky Mountain front are faulted against the Precambrian metamorphic rocks that make the core of the Tobacco Root, Madison, Gallatin, and Beartooth ranges. Its eastern edge is linear, controlled by steep faults at the west front of the Bridger Range. All other boundaries are sinuous and show little sign of structural control. Tertiary deposits in the basin , rich in contemporaneous rhyolitic and latitic ash, are about equally of lake, bolson, and stream origin . The western part of the basin is dominated by moderately folded Eocene and lower Oligocene rocks, more than 2000 feet thick. They dip eastward beneath apparently unfolded upper Miocene and Pliocene rocks, more than 1300 feet thick, that also dip gently eastward to the basin edge. Thin but extensive Quaternary deposits lying unconformably on the Tertiary and pre-Tertiary rocks are mainly of rounded terrace and flood-plain gravel, angular fan gravel, and wind-blown silt. The basin began as part of an east-flowing stream system that developed in Late Cretaceous and Paleocene time, concurrently with Laramide folding and thrusting; the faulted contact between metamorphic and sedimentary rocks was especially erodible and became a main drainage way. Recurrent uplift to the west throughout the Tertiary provided gradient and load to the streams; additional load was provided by showers of ash from unknown vents. Relative uplifts of the Bridger Range in Eocene and early Oligocene time, and again in late Miocene and Pliocene time, impeded flow from the basin and led to deposits in channels, flood plains, and lakes. During most of Oligocene and Miocene time, however, the basin was being eroded. By the end of the Tertiary the basin was deeply filled and became part of a regional surface of low relief. Regional northwestward tilting stimulated headward erosion of the Missouri River which then captured the formerly east-draining or closed basin . The Tertiary deposits have been deeply eroded, and the rugged pre- basin surface partly exhumed.

Montana↗
USGS1961

Origin of the Gulf of California

The probable cumulative Late Cretaceous and Cenozoic right-lateral strike-slip displacement along the San Andreas fault in central California is 350 miles. The San Andreas and the allied faults into which it branches southward trend longitudinally into the Gulf of California , and the seismicity of the region indicates that the fault system follows the length of the Gulf and enters the Pacific basin south of Baja California . Crustal structure of most of the Gulf is of oceanic type, so that an origin by structural depression of continental rocks is not possible. Tectonic styles north and south of Los Angeles differ greatly. To the north, the Coast Ranges expose thick Upper Cretaceous and Cenozoic sedimentary rocks that were deposited in local basins and deformed tightly and repeatedly. To the south, in the Peninsular Ranges and Baja California , correlative rocks are thin and show little compressive deformation. The California batholith of mid-Cretaceous age and allied crystalline rocks form the basement of Baja California , southwestern Arizona, and northwestern Sonora and probably extend along the coast of mainland Mexico; the Gulf apparently bisects the crystalline belt longitudinally. These features suggest that Baja California initially lay 300 miles to the southeast, against the continental-margin bulge of Jalisco. The Gulf of California may be a pull-apart feature caused by strike-slip displacement plus up to 100 miles of cross-strike separation of the continental plate, subcontinental materials having welled up into the rift gap. The strike-slip motion has a tensional component across the continental margin south of Los Angeles but a compressional component to the north.

Gulf of California↗