SEARCH · Geology Reports

Results for “Environmental Advances”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS1966

Salt-water encroachment in southern Nassau and southeastern Queens Counties, Long Island, New York

Test drilling, extraction of water from cores, electric logging, water sampling, and water-level measurements from 1958 to 1961 provided a suitable basis for a substantial refinement in the definition of the positions, chloride concentrations, and rates of movement of salty water in the intermediate and deep deposits of southern Nassau County and southeastern Queens County. Filter-press, centrifugal, and dilution methods were used to extract water from cores for chloride analysis at the test-drilling sites. Chloride analysis of water extracted by these methods, chloride analyses of water from wells, and the interpretation of electric logs helped to define the chloride content of the salty water. New concepts of environmental-water head and zerovels, developed during the investigation, proved useful for defining hydraulic gradients and ratee of flow in ground water of variable density in a vertical direction and in horizontal and inclined planes, respectively. Hydraulic gradients in and between fresh and salty water were determined from water levels from data at individual and multiple-observation wells. Salty ground water occurs in southern Nassau and southeastern Queens Counties as three wedgelike extensions that project landward in unconsolidated deposits from a main body of salty water that lies seaward of the barrier beaches in Nassau County and of Jamaica Bay in Queens County. Salty water occurs not only in permeable deposits but also in the shallow and deep clay deposits. The highest chloride content of the salty ground water in the main body and the wedges is about 16,000 ppm, which is about 1,000 to 2,000 ppm less than the chloride content of ocean water. The shallow salty water in the Pleistocene and Recent deposits is connected freely with the bays, tidal estuaries, and ocean. The intermediate wedge is found only in the southwestern part of Nassau County in the upper part of the Magothy (?) Formation, in the Jamneco Gravel, and in the overlying clay deposits. It extends from the seaward areas inland about 2 miles into Island Park. The deep wedge extends into southeastern Queens County and southern Nassau County principally in the deeper parts of the Magothy (?) Formation and in the underlying clay member of the Raritan Formation. The leading edge of the deep wedge is at the base of the Magothy (?) Formation. This edge is apparently at the shoreline east of Lido Beach and extends inland about 4 miles to Woodmere and about 7 miles to South Ozone Park. Zones of diffusion as much as 6 miles wide and about 500 feet thick were delineated in the frontal part of the salty-water wedges. These thick and broad zones of diffusion were probably formed during the past 1,000 or more years in heterogeneous unconsolidated deposits by long- and short-term changes in sea level and in fresh-water outflow to the sea and by dispersion caused by the movements of the water and its salt mass. Changes in sea level and fresh-water outflow together produced appreciable advances and recessions of the salt-water front. The chemical compositions of the diffused water in all wedges are modified to some extent by base exchange and other physical and chemical processes and also by diffusion. The intermediate wedge of salty water is moving landward at a rate of less than 20 feet a year in the vicinity of Island Park and, thus, has moved less than 1,000 feet since 1900. The leading edge of the deep wedge has advanced landward at about 300 feet a :ear in Woodmere in southwestern Nassau County and about 160 feet a year at South Ozone Park in southeastern Queens County, principally under the influence of local withdrawals near the toe of the wedge. Between Hewlett and Lido Beach, the deep wedge is moving inland at the rate of about 10 feet a year under the influence of regional withdrawals in inland areas. Regional encroachment of the deep wedge is apparently retarded appreciably by cyclic flow, that is, by the return seaward in the upper

Water Supply Paper↗

USGS2009

Fate of trace organic compounds during vadose zone soil treatment in an onsite wastewater system

During onsite wastewater treatment, trace organic compounds are often present in the effluents applied to subsurface soils for advanced treatment during vadose zone percolation and groundwater recharge. The fate of the endocrine-disrupting surfactant metabolites 4-nonylphenol (NP), 4-nonylphenolmonoethoxylate (NP1EO), and 4-nonylphenolmonoethoxycarboxylate (NP1EC), metal-chelating agents ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA), antimicrobial agent triclosan, stimulant caffeine, and antibiotic sulfamethoxazole during transport through an unsaturated sandy loam soil was studied at a field-scale test site. To assess the effects of effluent quality and hydraulic loading rate (HLR) on compound fate in the soil profile, two effluents (septic tank or textile biofilter) were applied at two design HLRs (2 or 8 cm/d). Chemical concentrations were determined in the two effluents and soil pore water at 60, 120, and 240 cm below the soil infiltrative surface. Concentrations of trace organic compounds in septic tank effluent were reduced by more than 90% during transport through 240 cm (often within 60 cm) of soil, likely due to sorption and biotransformation. However, the concentration of NP increased with depth in the shallow soil profile. Additional treatment of anaerobic septic tank effluent with an aerobic textile biofilter reduced effluent concentrations of many compounds, but generally did not affect any changes in pore water concentrations. The soil profile receiving septic tank effluent (vs. textile biofilter effluent) generally had greater percent removal efficiencies. EDTA, NP, NP1EC, and sulfamethoxazole were measured in soil pore water, indicating the ability of some trace organic compounds to reach shallow groundwater. Risk is highly dependent on the degree of further treatment in the saturated zone and the types and proximity of uses for the receiving groundwater environment.

Environmental Toxicology and Chemistry↗

USGS2024

Perspectives on equitable co-production workshop report

The co-production of knowledge is increasingly recognized as an approach to conducting research intended to achieve a societal impact. In this study, we used a broad definition of co-production, defining it as “a process that brings together diverse groups to iteratively create new knowledge and practices (1).” However, co-production has been defined and conceptualized in a variety of ways (2,3), across multiple domains, including public administration, conservation, health, education, and climate change. Theoretical definitions have been introduced by scholars like Jasanoff (4) and Ostrom (5), but definitions can also be grounded in practice (6). For example, unique definitions of co-production have been advanced for work with Arctic Indigenous Peoples (7), in the context of resource management (8), and for a specific program (9). Other similar processes of engagement, such as community-based participatory research (10), action research (11), civic science (12), community science (13), and post-normal science (14) may have overlap with the concept of co-production and have been used to describe similar processes of collaboration. These distinctions and varying definitions have been discussed extensively elsewhere (see Mach et al. 2020, Wyborn et al. 2019). In the context of co-production, power plays a crucial role in shaping interactions and outcomes. Some scholars and practitioners explicitly consider power dynamics as a central element in their definitions of co-production, recognizing how power imbalances can affect participation, decision-making, and the distribution of benefits. Others, however, might not emphasize power as prominently, focusing more on the collaborative aspects without explicitly addressing the underlying power structures. This leads to divergent objectives and priorities among projects claiming to be co-produced (2,3, 6). Chambers and colleagues (2) discussed how co-production projects in the context of sustainability usually emphasize one or more of six different goals, including: researching solutions, empowering voices, brokering power, reframing power, navigating differences, and reframing agency. Because power dynamics are inherent in co-production (15), equity dimensions should be considered in these definitions and conceptualizations. Yet, in the context of government or academically led climate change research and programs, equity is a relatively new focus, even among programs that have been engaging a co-production approach for decades (9). Alternatively, in some recent work the concept of equity in co-production is explicit, but it has only been considered in a limited context (7). Here, we present a discussion about co-production that is informed by research, practice, and community perspectives across partnerships from a range of regions and topics. We are specifically interested in how different actors in these projects think about equity and work towards more equitable approaches in the context of their co-production work. This understanding is needed, as the federal government has increasingly focused on co-production approaches in the design of their programs and funding calls, and most recently the Biden administration has called on federal agencies to more intentionally center equity for underserved groups of people in their work (16). Furthermore, with the Biden administration’s focus on environmental and climate justice, the opportunity for researchers and their societal partners to engage in co-production is expanding. Numerous programs within federal agencies have embraced a co-production approach, such as the National Oceanic and Atmospheric Administration (NOAA) Climate Adaptation Partnerships (CAP; formerly called the Regional Integrated Sciences and Assessments or RISA program) (9,17), Department of the Interior (DOI) Climate Adaptation Science Centers (CASCs)(18), and the US Department of Agriculture (USDA) Climate Hubs. However, the actual implementation of co-production processes varies significantly (1,19), with multiple implications for the design of equitable partnerships. Researchers, their partners, and funders have frequently cited many tensions and challenges in the successful implementation of co-production, including higher resource demands and few systemic structures for support (20). Practically implementing co-production, especially with people who have been underrepresented in or historically excluded from research activities, must consider fairness and the accessibility of co-production processes. While co-production is often cited as important for environmental governance, issues like power and equity are infrequently addressed (15). To explore this topic, we identified and studied three projects that centered on equity in co-production from three federal climate programs (CASC, CAP, USDA Climate Hubs) in three different regions of the U.S. (Alaska, Northeast, Southeast). We aimed to identify consensus or divergence in perspectives related to equitable co-production processes to elevate effective practices and link co-production research and practice. Findings from interviews and a survey (explained further in Akerlof et al., 2023) informed a twoday hybrid workshop involving participants from the three case studies, as well as individuals representing research, governmental, non-governmental, and community organizations across the United States. Participants also included scholars of co-production, program coordinators, and people who participated in co-production projects on behalf of their communities. Several boundary spanners, those practitioners who work at the intersection of the production and use of science (21,22), also attended the workshop. The goals of the workshop were to discuss and build on what was learned from the three case studies, discuss the three distinct perspectives on equitable co-production that emerged from the pre-workshop research, and draft a framework for equitable co-production processes. During the workshop, participants considered the three perspectives on equitable co-production, defining equitable co-production for each and discussing the practical implications of each, including barriers and priorities for overcoming them. We aimed to address the question: How can federal climate programs support equitable co-production processes?

Report↗

USGS2024

Prefabricated Zero Ascend Omnispecies (ZAO) modular fish passage modules using advanced manufacturing techniques

The Zero Ascend Omnispecies (ZAO) fish passage attraction module “ZAO Attractor” is a novel system designed to facilitate upstream passage for a broad spectrum of fish species, with a particular focus on American shad and river herring (alewife and/or blueback herring). Combining the use of prefabricated, modular components with advanced manufacturing, the ZAO aims to provide a cost-effective and scalable solution for fish passage attractions across various hydropower sites. The system features a surface level entry, so fish do not need to climb. In addition, it is designed to be adjusted and repositioned to create the most effective attraction flows by managing the outflows from hydropower turbines. Budget Period 1 (BP1) focused on the design and modeling of the ZAO Attractor and demonstrated the engineering feasibility of a modular, prefabricated, hydrodynamically efficient structure with surface level entry and passage. During BP1, the hypothesis was that certain structural adaptations, such as the addition of long fins, could direct turbine outflows to create a desirable downstream flow. Simulations, however, were inconclusive, revealing the complex nature of fish preferences for hydraulic conditions. It was discovered that there were limited published studies on the direct correlation between quantified flow patterns and fish attraction, emphasizing the need for controlled studies to observe and measure these effects. In Budget Period 2 (BP2), controlled studies with live fish were prioritized to address these complexities. A partially scaled ZAO Attractor was evaluated in laboratory conditions using native river water to assess its capability to attract and guide fish. Despite challenges with flume flow conditions and the impact of flume dimensions on flow directionality and velocity, the studies provided insights into fish behavior and preferences, particularly the requirement for a consistent flow stream for migration cues. Adjustments to the fin structure demonstrated potential effectiveness in guiding fish toward the module. However, the hydraulic conditions within the flume environment did not accurately reflect typical in-river scenarios, therefore the results were inconclusive with respect to the optimal system configuration for in-river use. In the future, conducting comprehensive field studies can enhance understanding of the interactions between fish behavior and flow conditions created by the ZAO Attractor. Additionally, a design review is advised, particularly regarding the load scenarios throughout the seasons and positioning of the ZAO Attractor. These studies should continue to refine the design to achieve its intended benefits: economical and effective fish attraction and passage that can be adapted to specific site conditions while allowing for continued energy generation at sites up for re-licensure and adding hydropower generation to previously untapped resources in non-powered dams and new stream reaches. In conclusion, the ZAO fish passage attraction module presents a promising approach to fish passage at hydropower stations, with the potential to balance environmental concerns with renewable energy development. However, further field validation and optimization are necessary to ensure its effectiveness and practicality in real-world applications.

Final Technical Report↗

USGS2017

Evaluation and use of U.S. Environmental Protection Agency Clean Watersheds Needs Survey data to quantify nutrient loads to surface water, 1978–2012

Changes in municipal and industrial point-source discharges over time have been an important factor affecting nutrient trends in many of the Nation’s streams and rivers. This report documents how three U.S. Environmental Protection Agency (EPA) national datasets—the Permit Compliance System, the Integrated Compliance Information System, and the Clean Watersheds Needs Survey—were evaluated for use in the U.S. Geological Survey National Water-Quality Assessment project to assess the causes of nutrient trends. This report also describes how a database of total nitrogen load and total phosphorous load was generated for select wastewater treatment facilities in the United States based on information reported in the EPA Clean Watersheds Needs Survey. Nutrient loads were calculated for the years 1978, 1980, 1982, 1984, 1986, 1988, 1990, 1992, 1996, 2000, 2004, 2008, and 2012 based on average nitrogen and phosphorous concentrations for reported treatment levels and on annual reported flow values. The EPA Permit Compliance System (PCS) and Integrated Compliance Information System (ICIS), which monitor point-source facility discharges, together are the Nation’s most spatially comprehensive dataset for nutrients released to surface waters. However, datasets for many individual facilities are incomplete, the PCS/ICIS historical data date back only to 1989, and historical data are available for only a limited number of facilities. Additionally, inconsistencies in facility reporting make it difficult to track or identify changes in nutrient discharges over time. Previous efforts made by the U.S. Geological Survey to “fill in” gaps in the PCS/ICIS data were based on statistical methods—missing data were filled in through the use of a statistical model based on the Standard Industrial Classification code, size, and flow class of the facility and on seasonal nutrient discharges of similar facilities. This approach was used to estimate point-source loads for a single point in time; it was not evaluated for use in generating a consistent data series over time. Another national EPA dataset that is available is the Clean Watersheds Needs Survey (CWNS), conducted every 4 years beginning 1973. The CWNS is an assessment of the capital needs of wastewater facilities to meet the water-quality goals set in the Clean Water Act. Data collected about these facilities include location and contact information for the facilities; population served; flow and treatment level of the facility; estimated capital needs to upgrade, repair, or improve facilities for water quality; and nonpoint-source best management practices. Total nitrogen and total phosphorous load calculations for each of the CWNS years were based on treatment level information and average annual outflow (in million gallons per day) from each of the facilities that had reported it. Treatment levels categories (such as Primary, Secondary, or Advanced) were substituted with average total nitrogen and total phosphorous concentrations for each treatment level based on those reported in literature. The CWNS dataset, like the PCS/ICIS dataset, has years where facilities did not report either a treatment level or an annual average outflow, or both. To fill in the data gaps, simple linear assumptions were made based on each facility’s responses to the survey in years bracketing the data gap or immediately before or after the data gap if open ended. Treatment level and flow data unique to each facility were used to complete the CWNS dataset for that facility.

Scientific Investigations Report↗

USGS2006

Relationships between reef fish communities and remotely sensed rugosity measurements in Biscayne National Park, Florida, USA

The realization that coral reef ecosystem management must occur across multiple spatial scales and habitat types has led scientists and resource managers to seek variables that are easily measured over large areas and correlate well with reef resources. Here we investigate the utility of new technology in airborne laser surveying (NASA Experimental Advanced Airborne Research Lidar (EAARL)) in assessing topographical complexity (rugosity) to predict reef fish community structure on shallow (<10 m deep) patch reefs. Marine portions of Biscayne National Park, Florida, USA, were surveyed remotely using the EAARL, and reef fish populations were visually surveyed on 10 patch reefs at independent, randomly selected stations ( n = 10–13 per reef). Rugosity at each station was assessed in situ by divers using the traditional chain-transect method (10-m scale), and remotely using the EAARL submarine topography data at multiple spatial scales (2, 5, and 10 m). The rugosity and biological datasets were analyzed together to elucidate the predictive power of EAARL rugosity in describing the variance in reef fish community variables and to assess the correlation between chain-transect and EAARL rugosity. EAARL rugosity was not well correlated with chain-transect rugosity, or with species richness of fishes (although statistically significant, the amount of variance explained by the model was very low). Variance in reef fish community attributes was better explained in reef-by-reef variability than by physical variables. However, once the reef-by-reef variability was taken into account in a two-way analysis of variance, the importance of rugosity could be seen on individual reefs. Fish species richness and abundance were statistically higher at high rugosity stations compared to medium and low rugosity stations, as predicted by prior ecological research. The EAARL shows promise as an important mapping tool for reef resource managers as they strive to inventory and protect coral reef resources.

Florida↗

USGS2019

Cooperative Fish and Wildlife Research Units program—2018 year in review

The Cooperative Fish and Wildlife Research Units (CRU) program had an interesting and challenging year in 2018. We made significant strategic advances on many fronts and had setbacks in others. Our relationship with the U.S. Fish and Wildlife Service, the agency we belonged to from 1935 to the mid-1990s, was further reinforced through strategic efforts with the Service’s Science Applications senior staff. This is bearing fruit in terms of research collaborations and funding support. As part of a larger effort between the U.S. Geological Survey (USGS) Ecosystems Mission Area and the Service’s endangered species program, we are also collaborating to address science needs for species in pre-listing status. Barry Grand, Unit Supervisor (South), has been instrumental in this effort. Tom Edwards of the Utah Unit has met with representatives of the U.S. Fish and Wildlife Service and the Association of Fish and Wildlife Agencies to promote training of leaders and “hands dirty” biologists in species distribution modeling. The Association passed a unanimous resolution endorsing the training at their midyear meeting in March. Tom held a workshop at the annual meeting of the Association of Fish and Wildlife Agencies in September, and future workshops, supported by the U.S. Fish and Wildlife Service, will be held bringing State agency and U.S. Fish and Wildlife Service biologists together to work on species of common concern. Wyoming Unit Leader Matt Kauffman’s pioneering work in identifying and mapping big-game migration corridors has captured the attention of conservationists far and wide. In the spring, the Secretary of the Interior signed Secretarial Order No. 3362, "Improving Habitat Quality in Western Big-Game Winter Range and Migration Corridors" directing efforts of several U.S. Department of the Interior (DOI) bureaus to collaborate with States in identifying and protecting big-game corridors in 11 States. Matt has conducted several workshops that directly support the Secretarial order, and more are planned. Corridor mapping efforts supported by the USGS and the DOI, based in the States and coordinated by Matt, are unfolding. Unit Administrative Officer Shana Coulby and her staff hosted a training program for university support staff at USGS National Headquarters in March. Shana’s team did a superb job, and the camaraderie among all was evident. We co-sponsored the third in a series of workshops at the North American Wildlife and Natural Resources Conference in March on bridging the gap between science and management. The State Department requested that we coordinate a workshop that would bring CRU scientists and other U.S. representatives together with Brazilian, Colombian, and Peruvian scientists and decision makers to develop best practices to minimize environmental damage from infrastructure development in the Amazon and to collaborate on science needs. The workshop was held in Iquitos, Peru, in the heart of the Amazon during August. Our cooperator community, represented by the National Cooperators Coalition, was very active in response to the President’s budget proposal that would have redirected funding for the CRU program to other priorities. Their efforts are reflected in the House and Senate marks on the fiscal year 2019 budget that not only restored funding, but recommended increases. You will see in this report many other accomplishments of our individual scientists and students during 2018. It was an impressive and productive year! What you won’t see chronicled is the work of the CRU headquarters staff and University support staff. These folks are extraordinary in their dedication to working with cooperators and scientists to solve problems and ensure the important work gets accomplished with minimal interference. We are truly fortunate to have such skilled and dedicated folks in the trenches. I was fortunate to visit several units during 2018. For me, this is the most enriching part of my duties. I get to see firsthand the work our scientists do, the incredible students being mentored, and meet our cooperators on their turf. As we look forward towards the horizon, 2019 looks brighter for the CRU program. Efforts by our cooperators to generate support for filling our vacancies are materializing. Our cadre of scientists is second to none, and the breadth and depth of our work are nothing short of impressive. Thanks to all who are part of this cooperative endeavor—conservation is the ultimate winner in our efforts!

Circular↗

USGS2023

Wildlife ecological risk assessment in the 21st century: Promising technologies to assess toxicological effects

Despite advances in toxicity testing and development of new approach methodologies (NAMs) for hazard assessment, the ecological risk assessment (ERA) framework for terrestrial wildlife (i.e., air-breathing amphibians, reptiles, birds, and mammals) has remained unchanged for decades. While survival, growth, and reproductive endpoints derived from whole animal toxicity tests are central to hazard assessment, non-standard measures of biological effects at multiple levels of biological organization (e.g., molecular, cellular, tissue, organ, organism, population, community, ecosystem) have potential to enhance the relevance of prospective and retrospective wildlife ERAs. Other factors (e.g., indirect effects of contaminants on food supplies and infectious disease processes) are influenced by toxicants at individual, population, and community levels, and need to be factored into chemically-based risk assessments to enhance the “eco” component of ERAs. Regulatory and logistical challenges often relegate such non-standard endpoints and indirect effects to post-registration evaluations of pesticides and industrial chemicals, and contaminated site evaluations. While NAMs are being developed, to date their applications in ERAs focused on wildlife have been limited. No single magic tool or model will address all uncertainties in hazard assessment. Modernizing wildlife ERAs will likely entail combinations of laboratory and field-derived data at multiple levels of biological organization, knowledge collection solutions (e.g., systematic review, adverse outcome pathway frameworks), and inferential methods that facilitate integrations and risk estimations focused on species, populations, interspecific extrapolations, and ecosystem services modeling, with less dependence on whole animal data and simple hazard ratios.

Integrated Environmental Assessment and Management↗

USGS2022

Section 5: Remote sensing of vegetation in the riparian corridor of the Colorado River’s delta 2013-2018

This remote sensing section is based on Nagler et al. (in preparation for the journal Hydrological Processes) and is a summary of the USGS preliminary findings to date. This report documents the changes in green foliage density (greenness) as measured by satellite vegetation index (VI) data and corresponding evapotranspiration (ET) in the riparian corridor of the Colorado River delta associated with the Minutes 319 and 323 environmental water deliveries using time-series data from 2013 through 2018. The report focuses on what happened only within the riparian corridor’s seven reaches since the 2014 flows, and despite being a continuation of measuring greenness and ET after the 2017 end of Minute 319, this study continued the tracking of these two variables, greenness and ET, in these original riparian corridor focal areas. Two spatial scales are used here: (1) Landsat satellite imagery at 30 m pixels and (2) the EOS-1 satellite sensor the Moderate Resolution Imaging Spectrometer (MODIS) with a resolution of 250 m pixels. The focal period includes 2013 (prepulse flow) and the years 2014-2018, with a focus on imagery collected from the Summer growing seasons 2014 through 2018 (one-year, pre-pulse and several post-pulse years, respectively). This report re-creates the 2013-2017 Landsat-based results from Jarchow et al. (2017a, b) by using the same region of interest (ROI). The report now provides revised and re-created results using all new imagery acquisition and processing techniques, as well as extraction code, created by the Vegetation Index and Phenology (VIP) Lab of the Biosystems Engineering Department of the University of Arizona (UofA). In 2018, methods employed by the VIP lab (and not ArcGIS) were used. ArcGIS was only used in the newly processed data to display the final difference maps. The entire spatial tile data from NASA was downloaded and processed at the VIP Lab using satellite imagery at two resolutions: 250 m MODIS and 30 m Landsat using three sensors, Landsat 5, Landsat 7 ETM+ and Landsat 8 Operational Land Imager (OLI), with added scenes for each year based on new clear atmosphere requirements. The VIP lab clipped the river boundary and seven riparian reaches from the previously existing ROI used in Jarchow et al. (2017 a, b) for the analyses done under Minute 319. The NASA image datasets for this riparian corridor ROI in seven reaches were re-processed to produce additional vegetation index (VI) information for years 2013 to 2018 for this report. At the same time, the report acquired and processed imagery from 2000- 2018 (data outside the scope of this report and data not shown here). The additional VIs (NDVI, scaled NDVI, EVI, EVI2) were analyzed so that new assessments of greenness and ET could be produced from the imagery datasets following methods in Nagler et al. (2013). These VI choices were based on previous performance comparisons between biophysical ground-based data and radiometric satellite-based data collected from this riparian ecosystem (Nagler et al., 2001) as well as performance related to ET estimation (Nagler et al., 2005a, b) and current advancements in VIs such as EVI2.

Colorado River Delta↗

USGS2024

Comparison of seven DNA metabarcoding sampling methods to assess diet in a large avian predator

DNA metabarcoding is a rapidly advancing tool for diet assessment in wildlife ecology. Studies have used a variety of field collection methods to evaluate diet; however, there is a pressing need to understand the differences among sampling methods and the downstream inferential consequences they may have on our ability to document diet accurately and efficiently. We evaluated seven DNA metabarcoding sampling methods to assess the diet of a large avian predator: Buteo lagopus (rough-legged hawk). We collected beak swabs, talon swabs, cheek (buccal) swabs, cloacal swabs, and cloacal loops from captured birds, and collected fecal samples from both captured and uncaptured birds. We described and compared variation in prey recovery within and among the seven sampling methods and identified appropriate analytical methods to compare diet among individuals sampled via different methods. Beak and talon swabs produced the highest prey detection rates, yielded the greatest prey richness per sample, and contributed the most to an individual's total prey richness per sampling occasion compared to other sampling methods. Within individuals sampled using five methods during a single capture occasion, cloacal swabs and cheek swabs positively predicted prey richness and average prey mass, respectively, from fecal samples. While all methods identified similar dominant prey taxa that were consistent with prior diet studies, beak and talon swabs detected greater prey richness at both the individual and population levels. We propose a food residue duration hypothesis whereby methods which sample areas containing food DNA consumed from longer and more continuous pre-sampling time intervals explain variation among sampling methods in observed prey richness. Choice of sampling method can influence predator diet characterization and is particularly important if researchers wish to quantify uncommon diet items or compare diet metrics using samples collected via different methods.

Environmental DNA↗

USGS1977

Surficial and applied surficial geology of the Belchertown Quadrangle, Massachusetts

Till and stratified drift overlie maturely dissected topography in the Belchertown quadrangle, an area that straddles the New England Upland and Connecticut Valley Lowland in central Massachusetts. Lower Paleozoic, massive quartzo-feldspathic gneiss, quartzite and schist of the Pelham dome and Devonian granodiorite and quartz diorite of the Belchertown intrusive complex are in contact with Triassic arkosic fanglomerate and basalt along a lengthy normal fault separating the New England Upland from the Connecticut Valley Lowland. The orientation of striae, roches moutonnees, and streamline ridges indicate that the last Wisconsinian glacier advanced generally south 12? east. This glacier removed several meters of rock from the upland and an unknown larger quantity from the preglacial valley of the Connecticut River. Till is thin in the uplands, but several tens of feet of drift overlie bedrock in the lowland. Three lithic facies of sandy, clast-rich, non-compact, subarkosic till derived from the three major source rocks rest on bedrock or on highly weathered, compact, clast-poor, fissile probably older till. The mean for all upper till is 69.6% sand, 21.7% silt, and 8.8% clay; lower till consists of 48% sand, 23% silt and 29% clay. Mud-rich, compact, sparsely stony till in drumlins in and along the flank of the Connecticut Valley Lowland is composed of 51.5% sand, 28% silt, and 20.5% clay. Upper tills are facies equivalent deposits of the youngest Wisconsinian drift. Lower till is compact deeply weathered, jointed and stained suggesting it is correlative with other lower till in New England deposited by an earlier Wisconsinian glacier. Drumlin till may be a facies equivalent of a lower till or a mud-rich upper till derived from earlier glaciolacustrine deposits. Upper and lower till of the Belchertown quadrangle is texturally similar to other New England upper and lower tills to which they are equivalent. Both tills are interpreted as lodgment till derived from similar bedrock terrane by two different glaciers. The older glacier incorporated mud-rich saprolite producing a fine grained till, while the younger glacier eroded fresh bedrock or a thin regolith produced by mechanical weathering. During stagnation zone retreat of the last glacier, stratified drift was deposited by melt water in, on, alongside or down valley from stagnant ice. The absence of stratified drift along upland divides indicates that stagnation did not begin till large nunataks were emergent. Kame terraces, kame deltas, and ice channel fillings indicate that melt water flowed along stagnant ice and emptied into temporary proglacial lakes. As downwasting progressed, water was able to drain at lower elevation into expanding lakes, the last of which merged with northward-expanding proglacial Lake Hitchcock in the Connecticut Valley. Initial melt water drainage to the southeast was followed by drainage to the southwest to the ancestral Chicopee River. With the opening of the Narrows, Lake Hitchcock expanded northward and eastward to form the Amherst embayment into which melt water from the eastern uplands drained. Sand and gravel overlying varves in the Amherst embayment was deposited in late-glacial Lake Lawrence, which coalesced with equivalent Lake Hadley through cols between drumlins in the Connecticut Valley Lowland. Deglaciation of the Belchertown quadrangle probably occurred in a span of about 100 years in the interval 12,000 to 12,500 years B.P. Unconsolidated sediments of the Belchertown quadrangle are summarized as to their geologic and geotechnical properties for land use planning. Drift as it influences groundwater flow, yield, and quality and as a construction material is assessed. Some environmental degradation has occurred from the indiscriminant disposal of liquid and solid waste as well as injudicious use of road salt.

Open-File Report↗

USGS2019

Modeling long-term effects of fuel treatments on fuel loads and fire regimes in the Great Basin

The principal motivation for this study is that sagebrush-steppe ecosystems are undergoing significant state changes, and land managers are challenged with optimizing their resources for both short- and long-term use. Yet, limited knowledge is available regarding how the sagebrush-steppe will respond to environmental changes related to precipitation and temperature regimes, and disturbance such as fire. Furthermore, there is a lack of understanding on how fuels reduction and other fuel management activities will impact these ecosystems over the long-term. We addressed these challenges by adapting and testing a vegetation dynamics model, the Ecosystem Demography v2.2 model (EDv2.2), for the sagebrush-steppe. Vegetation dynamics models can provide estimations of ecosystem productivity in their natural and disturbance states, and thus serve as a tool to understand and predict potential changes in various processes and properties of vegetation communities. Yet, there is no vegetation dynamics model that is well-developed for the sagebrush-steppe, and thus significant effort is needed to test EDv2.2 for its application. As part of our efforts to develop the EDv2.2 model into a useful tool for the sagebrush-steppe, we developed a sagebrush plant functional type (PFT) as part of this study, and then performed sensitivity analyses, model calibration, and finally model evaluation. Furthermore, we developed several model scenarios under natural (undisturbed) and disturbed (fire) environments. We compared our model outputs with ground-based data (field and eddy covariance) and remote sensing observations. The results of our project include a sagebrush PFT that can be used in both future EDv2.2 modeling efforts and other vegetation dynamic models. Our results from the model sensitivity analysis indicate that specific leaf area (SLA), stomatal slope (STO_S), cuticular conductance (CUT_C), and carboxylase rate constant (VM0) are sensitive parameters to vegetation productivity in the model (based on gross primary production, GPP), and future modeling efforts will benefit from both lab and field studies of these parameters and sensitivity analyses. Through calibration, we found that the EDv2.2 model estimates of GPP were modeled well at our lowest elevation field site in Reynolds Creek Experimental Watershed (RCEW), which is dominated by Wyoming big sagebrush. On the contrary, we found poorer results at higher elevation site shrub sites. These sites are characterized by either low sagebrush or mountain big sagebrush, and have more forb cover than the low elevation site. In this project we also implemented the fire model in EDv2.2 to explore how shrub and C3 grasses respond to fire by analyzing post-fire GPP. We ran both point and regional model runs with fire introduced. In most fire scenarios, fire substantially reduced shrub GPP and it took several decades for shrub GPP to return to pre-fire conditions. Grass GPP responded more quickly in post-fire conditions. While these processes are representative of what other studies have found, significant efforts to improve the fire processes in EDv2.2 are needed. For example, nuances associated with the fire subroutine in the model (running periodic fire events versus instantaneous fires and fire intensity) will need to be expanded. Another significant contribution to our knowledge gap is that additional PFTs to represent the sagebrush-steppe (e.g. annual grasses such cheatgrass) are needed for EDv2.2. Regardless, this project made significant advances in PFT development and model testing. Moreover, the EDv2.2 provides a useful framework to conceptualize vegetation dynamics, project future conditions, and consider fire as a disturbance. With additional parameterizations, PFTs, and fire routines, EDv2.2 will evolve as a tool for which to better understand future ecosystem dynamics of the sagebrush-steppe.

Idaho↗

USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

USGS2014

Ecological risks of shale oil and gas development to wildlife, aquatic resources and their habitats

Technological advances in hydraulic fracturing and horizontal drilling have led to the exploration and exploitation of shale oil and gas both nationally and internationally. Extensive development of shale resources has occurred within the United States over the past decade, yet full build out is not expected to occur for years. Moreover, countries across the globe have large shale resources and are beginning to explore extraction of these resources. Extraction of shale resources is a multistep process that includes site identification, well pad and infrastructure development, well drilling, high-volume hydraulic fracturing and production; each with its own propensity to affect associated ecosystems. Some potential effects, for example from well pad, road and pipeline development, will likely be similar to other anthropogenic activities like conventional gas drilling, land clearing, exurban and agricultural development and surface mining (e.g., habitat fragmentation and sedimentation). Therefore, we can use the large body of literature available on the ecological effects of these activities to estimate potential effects from shale development on nearby ecosystems. However, other effects, such as accidental release of wastewaters, are novel to the shale gas extraction process making it harder to predict potential outcomes. Here, we review current knowledge of the effects of high-volume hydraulic fracturing coupled with horizontal drilling on terrestrial and aquatic ecosystems in the contiguous United States, an area that includes 20 shale plays many of which have experienced extensive development over the past decade. We conclude that species and habitats most at risk are ones where there is an extensive overlap between a species range or habitat type and one of the shale plays (leading to high vulnerability) coupled with intrinsic characteristics such as limited range, small population size, specialized habitat requirements, and high sensitivity to disturbance. Examples include core forest habitat and forest specialists, sagebrush habitat and specialists, vernal pond inhabitants and stream biota. We suggest five general areas of research and monitoring that could aid in development of effective guidelines and policies to minimize negative impacts and protect vulnerable species and ecosystems: (1) spatial analyses, (2) species-based modeling, (3) vulnerability assessments, (4) ecoregional assessments, and (5) threshold and toxicity evaluations.

Environmental Science & Technology↗

USGS2024

Identifying and filling critical knowledge gaps can optimize financial viability of blue carbon projects in tidal wetlands

One of the world’s largest “blue carbon” ecosystems, Louisiana’s tidal wetlands on the US Gulf of Mexico coast, is rapidly being lost. Louisiana’s strong legal, regulatory, and monitoring framework, developed for one of the world’s largest tidal wetland systems, provides an opportunity for a programmatic approach to blue carbon accreditation to support restoration of these ecologically and economically important tidal wetlands. Louisiana’s coastal wetlands span ∼1.4 million ha and accumulate 5.5–7.3 Tg yr −1 of blue carbon (organic carbon), ∼6%–8% of tidal marsh blue carbon accumulation globally. Louisiana has a favorable governance framework to advance blue carbon accreditation, due to centralized restoration planning, long term coastal monitoring, and strong legal and regulatory frameworks around carbon. Additional restoration efforts, planned through Louisiana’s Coastal Master Plan, over 50 years are projected to create, or avoid loss of, up to 81,000 ha of wetland. Current restoration funding, primarily from Deepwater Horizon oil spill settlements, will be fully committed by the early 2030s and additional funding sources are required. Existing accreditation methodologies have not been successfully applied to coastal Louisiana’s ecosystem restoration approaches or herbaceous tidal wetland types. Achieving financial viability for accreditation of these restoration and wetland types will require expanded application of existing blue carbon crediting methodologies. It will also require expanded approaches for predicting the future landscape without restoration, such as numerical modeling, to be validated. Additional methodologies (and/or standards) would have many common elements with those currently available but may be beneficial, depending on the goals and needs of both the state of Louisiana and potential purchasers of Louisiana tidal wetland carbon credits. This study identified twenty targeted needs that will address data and knowledge gaps to maximize financial viability of blue carbon accreditation for Louisiana’s tidal wetlands. Knowledge needs were identified in five categories: legislative and policy, accreditation methodologies and standards, soil carbon flux, methane flux, and lateral carbon flux. Due to the large spatial scale and diversity of tidal wetlands, it is expected that progress in coastal Louisiana has high potential to be generalized to similar wetland ecosystems across the northern Gulf of Mexico and globally.

Louisiana↗

USGS2025

When the wild things are: Defining mammalian diel activity and plasticity

Circadian rhythms are a mechanism by which species adapt to environmental variability and fundamental to understanding species behavior. However, we lack data and a standardized framework to accurately assess and compare temporal activity for species during rapid ecological change. Through a global network representing 38 countries, we leveraged 8.9 million mammalian observations to create a library of 14,587 standardized diel activity estimates for 445 species. We found that less than half the species’ estimates were in agreement with diel classifications from the reference literature and that species commonly used more than one diel classification. Species diel activity was highly plastic when exposed to anthropogenic change. Furthermore, body size and distributional extent were strongly associated with whether a species is diurnal or nocturnal. Our findings provide essential knowledge of species behavior in an era of rapid global change and suggest the need for a new, quantitative framework that defines diel activity logically and consistently while capturing species plasticity.

Science Advances↗

USGS2013

Historical methane hydrate project review

In 1995, U.S. Geological Survey made the first systematic assessment of the volume of natural gas stored in the hydrate accumulations of the United States. That study, along with numerous other studies, has shown that the amount of gas stored as methane hydrates in the world greatly exceeds the volume of known conventional gas resources. However, gas hydrates represent both a scientific and technical challenge and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of gas hydrates in nature, (2) assessing the volume of natural gas stored within various gas hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural gas hydrates, and (5) analyzing the effects of methane hydrate on drilling safety. Methane hydrates are naturally occurring crystalline substances composed of water and gas, in which a solid water-‐lattice holds gas molecules in a cage-‐like structure. The gas and water becomes a solid under specific temperature and pressure conditions within the Earth, called the hydrate stability zone. Other factors that control the presence of methane hydrate in nature include the source of the gas included within the hydrates, the physical and chemical controls on the migration of gas with a sedimentary basin containing methane hydrates, the availability of the water also included in the hydrate structure, and the presence of a suitable host sediment or “reservoir”. The geologic controls on the occurrence of gas hydrates have become collectively known as the “methane hydrate petroleum system”, which has become the focus of numerous hydrate research programs. Recognizing the importance of methane hydrate research and the need for a coordinated effort, the U.S. Congress enacted Public Law 106-‐193, the Methane Hydrate Research and Development Act of 2000. This Act called for the Secretary of Energy to begin a methane hydrate research and development program in consultation with other U.S. federal agencies. At the same time a new methane hydrate research program had been launched in Japan by the Ministry of International Trade and Industry to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. Since this early start we have seen other countries including India, China, Canada, and the Republic of Korea establish large gas hydrate research and development programs. These national led efforts have also included the investment in a long list of important scientific research drilling expeditions and production test studies that have provided a wealth of information on the occurrence of methane hydrate in nature. The most notable expeditions and projects have including the following: -‐Ocean Drilling Program Leg 164 (1995) -‐Japan Nankai Trough Project (1999-‐2000) -‐Ocean Drilling Program Leg 204 (2004) -‐Japan Tokai-‐oki to Kumano-‐nada Project (2004) -‐Gulf of Mexico JIP Leg I (2005) -‐Integrated Ocean Drilling Program Expedition 311 (2005) -‐Malaysia Gumusut-‐Kakap Project (2006) -‐India NGHP Expedition 01 (2006) -‐China GMGS Expedition 01 (2007) -‐Republic of Korea UBGH Expedition 01 (2007) -‐Gulf of Mexico JIP Leg II (2009) -‐Republic of Korea UBGH Expedition 02 (2010) -‐MH-‐21 Nankai Trough Pre-‐Production Expedition (2012-‐2013) -‐Mallik Gas Hydrate Testing Projects (1998/2002/2007-‐2008) -‐Alaska Mount Elbert Stratigraphic Test Well (2007) -‐Alaska Iġnik Sikumi Methane Hydrate Production Test Well (2011-‐2012) Research coring and seismic programs carried out by the Ocean Drilling Program (ODP) and Integrated Ocean Drilling Program (IODP), starting with the ODP Leg 164 drilling of the Blake Ridge in the Atlantic Ocean in 1995, have also contributed greatly to our understanding of the geologic controls on the formation, occurrence, and stability of gas hydrates in marine environments. For the most part methane hydrate research expeditions carried out by the ODP and IODP provided the foundation for our scientific understanding of gas hydrates. The methane hydrate research efforts under ODP-‐IODP have mostly dealt with the assessment of the geologic controls on the occurrence of gas hydrate, with a specific goal to study the role methane hydrates may play in the global carbon cycle. Over the last 10 years, national led methane hydrate research programs, along with industry interest have led to the development and execution of major methane hydrate production field test programs. Two of the most important production field testing programs have been conducted at the Mallik site in the Mackenzie River Delta of Canada and in the Eileen methane hydrate accumulation on the North Slope of Alaska. Most recently we have also seen the completion of the world’s first marine methane hydrate production test in the Nankai Trough in the offshore of Japan. Industry interest in gas hydrates has also included important projects that have dealt with the assessment of geologic hazards associated with the presence of hydrates. The scientific drilling and associated coring, logging, and borehole monitoring technologies developed in the long list of methane hydrate related field studies are one of the most important developments and contributions associated with methane hydrate research and development activities. Methane hydrate drilling has been conducted from advanced scientific drilling platforms like the JOIDES Resolution and the D/V Chikyu, which feature highly advanced integrated core laboratories and borehole logging capabilities. Hydrate research drilling has also included the use of a wide array of industry, geotechnical and multi-‐service ships. All of which have been effectively used to collect invaluable geologic and engineering data on the occurrence of methane hydrates throughout the world. Technologies designed specifically for the collection and analysis of undisturbed methane hydrate samples have included the development of a host of pressure core systems and associated specialty laboratory apparatus. The study and use of both wireline conveyed and logging-‐while-‐drilling technologies have also contributed greatly to our understanding of the in-‐situ nature of hydrate-‐bearing sediments. Recent developments in borehole instrumentation specifically designed to monitor changes associated with hydrates in nature through time or to evaluate the response of hydrate accumulations to production have also contributed greatly to our understanding of the complex nature and evolution of methane hydrate systems. Our understanding of how methane hydrates occur and behave in nature is still growing and evolving – we do not yet know if methane hydrates can be economically produced, nor do we know fully the role of hydrates as an agent of climate change or as a geologic hazard. But it is known for certain that scientific drilling has contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information to advance our understanding of methane hydrates.

Report↗

USGS2014

Spatially explicit habitat models for 28 fishes from the Upper Mississippi River System (AHAG 2.0)

Environmental management actions in the Upper Mississippi River System (UMRS) typically require pre-project assessments of predicted benefits under a range of project scenarios. The U.S. Army Corps of Engineers (USACE) now requires certified and peer-reviewed models to conduct these assessments. Previously, habitat benefits were estimated for fish communities in the UMRS using the Aquatic Habitat Appraisal Guide (AHAG v.1.0; AHAG from hereon). This spreadsheet-based model used a habitat suitability index (HSI) approach that drew heavily upon Habitat Evaluation Procedures (HEP; U.S. Fish and Wildlife Service, 1980) by the U.S. Fish and Wildlife Service (USFWS). The HSI approach requires developing species response curves for different environmental variables that seek to broadly represent habitat. The AHAG model uses species-specific response curves assembled from literature values, data from other ecosystems, or best professional judgment. A recent scientific review of the AHAG indicated that the model’s effectiveness is reduced by its dated approach to large river ecosystems, uncertainty regarding its data inputs and rationale for habitat-species response relationships, and lack of field validation (Abt Associates Inc., 2011). The reviewers made two major recommendations: (1) incorporate empirical data from the UMRS into defining the empirical response curves, and (2) conduct post-project biological evaluations to test pre-project benefits estimated by AHAG. Our objective was to address the first recommendation and generate updated response curves for AHAG using data from the Upper Mississippi River Restoration-Environmental Management Program (UMRR-EMP) Long Term Resource Monitoring Program (LTRMP) element. Fish community data have been collected by LTRMP (Gutreuter and others, 1995; Ratcliff and others, in press) for 20 years from 6 study reaches representing 1,930 kilometers of river and >140 species of fish. We modeled a subset of these data (28 different species; occurrences at sampling sites as observed in day electrofishing samples) using multiple logistic regression with presence/absence responses. Each species’ probability of occurrence, at each sample site, was modeled as a function of 17 environmental variables observed at each sample site by LTRMP standardized protocols. The modeling methods used (1) a forward-selection process to identify the most important predictors and their relative contributions to predictions; (2) partial methods on the predictor set to control variance inflation; and (3) diagnostics for LTRMP design elements that may influence model fits. Models were fit for 28 species, representing 3 habitat guilds (Lentic, Lotic, and Generalist). We intended to develop “systemic models” using data from all six LTRMP study reaches simultaneously; however, this proved impossible. Thus, we “regionalized” the models, creating two models for each species: “Upper Reach” models, using data from Pools 4, 8, and 13; and “Lower Reach” models, using data from Pool 26, the Open River Reach of the Mississippi River, and the La Grange reach of the Illinois River. A total of 56 models were attempted. For any given site-scale prediction, each model used data from the three LTRMP study reaches comprising the regional model to make predictions. For example, a site-scale prediction in Pool 8 was made using data from Pools 4, 8, and 13. This is the fundamental nature and trade-off of regionalizing these models for broad management application. Model fits were deemed “certifiably good” using the Hosmer and Lemeshow Goodness-of-Fit statistic (Hosmer and Lemeshow, 2000). This test post-partitions model predictions into 10 groups and conducts inferential tests on correspondences between observed and expected probability of occurrence across all partitions, under Chi-square distributional assumptions. This permits an inferential test of how well the models fit and a tool for reporting when they did not (and perhaps why). Our goal was to develop regionalized models, and to assess and describe circumstances when a good fit was not possible. Seven fish species composed the Lentic guild. Good fits were achieved for six Upper Reach models. In the Lower Reach, no model produced good fits for the Lentic guild. This was due to (1) lentic species being much less prominent in the Lower Reach study areas, and (2) those that do express greater prominence principally do so only in the La Grange reach of the Illinois River. Thus, developing Lower Reach models for Lentic species will require parsing La Grange from the other two Lower Reach study areas and fitting separate models. We did not do that as part of this study, but it could be done at a later time. Nine species comprised the Lotic guild. Good fits were achieved for seven Upper Reach models and six Lower Reach models. Four species had good fits for both regions (flathead catfish, blue sucker, sauger, and shorthead redhorse). Three species showed zoogeographic zonation, with a good model fit in one of the regions, but not in the region in which they were absent or rarely occurred (blue catfish, rock bass, and skipjack herring). Twelve species comprised the Generalist guild. Good fits were achieved for five Upper Reach models and eight Lower Reach models. Six species had good fits for both regions (brook silverside, emerald shiner, freshwater drum, logperch, longnose gar, and white bass). Two species showed zoogeographic zonation, with a good model fit in one of the regions, but not in the region in which they were absent or rarely occurred (red shiner and blackstripe topminnow). Poorly fit models were almost always due to the diagnostic variable “field station,” a surrogate for river mile. In these circumstances, the residuals for “field station” were non-randomly distributed and often strongly ordered. This indicates either fitting “pool scale” models for these species and regions, or explicitly model covariances between “field station” and the other predictors within the existing modeling framework. Further efforts on these models should seek to resolve these issues using one of these two approaches. In total, nine species, representing two of the three guilds (Lotic and Generalist), produced well-fit models for both regions. These nine species should comprise the basis for AHAG 2.0. Additional work, likely requiring downscaling of the regional models to pool-scale models, will be needed to incorporate additional species. Alternately, a regionalized AHAG could be comprised of those species, per region, that achieved well-fit models. The number of species and the composition of the regional species pools will differ among regions as a consequence. Each of these alternatives has both pros and cons, and managers are encouraged to consider them fully before further advancing this approach to modeling multi-species habitat suitability.

Upper Mississippi River System↗