SEARCH · Geology Reports

Results for “Elements”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS2005

SVFlux and ChemFlux: Software for two-dimensional/three-dimensional finite element variably saturated flow and transport modeling

SVFlux and ChemFlux are a pair of finite element models designed to simulate the movement of water and contaminants in two and three dimensions under variably saturated conditions. The transport simulator ChemFlux is designed as a companion to the flow simulator SVFlux. SVFlux and ChemFlux are commercial products developed by SoilVision Systems Ltd. and can be purchased via the company's Web site. SVFlux and ChemFlux run under Microsoft Windows NT/2000/XP operating systems, and require a minimum of 128 MB RAM and approximately 150 MB hard drive space. The software includes Windows-based graphical user interface, numerical model engines, and post-processing programs. SVFlux and ChemFlux are suitable for numerous applications such as modeling of water and transport modeling in aquifers and the unsaturated zone, modeling of seepage across dams and geomembranes, and modeling of infiltration, excess pore water buildup, and dissipation. This article is based on two independent reviews of SVFlux (versions 4.05 and 5.04) and ChemFlux (versions 3.00 and 3.03).

Groundwater↗

USGS2005

Estimating recharge rates with analytic element models and parameter estimation

Quantifying the spatial and temporal distribution of recharge is usually a prerequisite for effective ground water flow modeling. In this study, an analytic element (AE) code (GFLOW) was used with a nonlinear parameter estimation code (UCODE) to quantify the spatial and temporal distribution of recharge using measured base flows as calibration targets. The ease and flexibility of AE model construction and evaluation make this approach well suited for recharge estimation. An AE flow model of an undeveloped watershed in northern Wisconsin was optimized to match median annual base flows at four stream gages for 1996 to 2000 to demonstrate the approach. Initial optimizations that assumed a constant distributed recharge rate provided good matches (within 5%) to most of the annual base flow estimates, but discrepancies of >12% at certain gages suggested that a single value of recharge for the entire watershed is inappropriate. Subsequent optimizations that allowed for spatially distributed recharge zones based on the distribution of vegetation types improved the fit and confirmed that vegetation can influence spatial recharge variability in this watershed. Temporally, the annual recharge values varied >2.5-fold between 1996 and 2000 during which there was an observed 1.7-fold difference in annual precipitation, underscoring the influence of nonclimatic factors on interannual recharge variability for regional flow modeling. The final recharge values compared favorably with more labor-intensive field measurements of recharge and results from studies, supporting the utility of using linked AE-parameter estimation codes for recharge estimation. Copyright ?? 2005 The Author(s).

Ground Water↗

USGS2010

A hybrid finite-difference and analytic element groundwater model

Regional finite-difference models tend to have large cell sizes, often on the order of 1–2 km on a side. Although the regional flow patterns in deeper formations may be adequately represented by such a model, the intricate surface water and groundwater interactions in the shallower layers are not. Several stream reaches and nearby wells may occur in a single cell, precluding any meaningful modeling of the surface water and groundwater interactions between the individual features. We propose to replace the upper MODFLOW layer or layers, in which the surface water and groundwater interactions occur, by an analytic element model (GFLOW) that does not employ a model grid; instead, it represents wells and surface waters directly by the use of point-sinks and line-sinks. For many practical cases it suffices to provide GFLOW with the vertical leakage rates calculated in the original coarse MODFLOW model in order to obtain a good representation of surface water and groundwater interactions. However, when the combined transmissivities in the deeper (MODFLOW) layers dominate, the accuracy of the GFLOW solution diminishes. For those cases, an iterative coupling procedure, whereby the leakages between the GFLOW and MODFLOW model are updated, appreciably improves the overall solution, albeit at considerable computational cost. The coupled GFLOW–MODFLOW model is applicable to relatively large areas, in many cases to the entire model domain, thus forming an attractive alternative to local grid refinement or inset models.

Groundwater↗

USGS2007

Elements in cottonwood trees as an indicator of ground water contaminated by landfill leachate

Ground water at the Norman Landfill Research Site is contaminated by a leachate plume emanating from a closed, unlined landfill formerly operated by the city of Norman, Oklahoma, Ground water contaminated by the leachate plume is known to be elevated in the concentration of many, organic and inorganic constituents. Specific conductance, alkalinity, chloride, dissolved organic carbon, boron, sodium, strontium, and deuterium in ground water are considered to be indicators of the leachate plume at this site. Leaf samples of broad-leafed cottonwood, Populus deltoides, were collected from 57 sites around the closed landfill. Cottonwood, a phreatophyte or “well plant,” functions as a & surrogate well and serves as a ground water quality sampler. The leaf samples were combusted to ash and analyzed by instrumental neutron activation for 35 elements and by prompt-gamma instrumental neutron activation, for boron. A monitoring well was located within a few meters of a sampled cottonwood tree at 15 of the 57 sites, and ground water samples were collected from these monitoring wells simultaneously with a leaf sample. The chemical analyses of the ground water and leaf samples from these 15 sites indicated that boron, bromine, sodium, and strontium concentrations in leaves were significantly correlated with leachate indicator constituents in ground water. A point-plot map of selected percentiles indicated high concentrations of boron, bromine, and sodium in leaf ash from sites downgradient of the most recent landfill and from older landfills nearby. Data from leaf analysis greatly extended the known areal extent of the leachate plume previously determined from a network of monitoring wells and geophysical surveys. This phytosgeochemical study provided a cost-effective method for assessing the extent of a leachate plume from an old landfill. Such a method may be useful as a preliminary sampling tool to guide the design of hydrogeochemical and geophysical studies.

Oklahoma↗

USGS2022

Mapping first to final uses for rare earth elements, globally and in the United States

Estimating the material flows of rare earth elements (REEs) is essential to understanding which industries are most vulnerable to potential REE supply disruptions which, in turn, may inform policy recommendations aimed at reducing the supply risk. However, the REEs are a group of mineral commodities characterized by highly uncertain estimates of supply and demand due to the REE market's complexity, opacity, and small size. In this study, a streamlined methodology was applied to map mineral commodity first-use to final-use applications and to estimate total requirements at the national level based on available industrial data for final-use finished goods. This analysis examines REEs both as a group and individually, showing that total US requirements are between 15% and 16.5% of world requirements for the year 2015, the latest year with the most complete information available. The findings shed light on US industrial capabilities by revealing the discrepancy between the types of REEs that go into US raw material consumption and those that are contained in embedded consumption. For instance, given the United States’ large oil refining industry, US raw material consumption of lanthanum is quite high. In contrast, US raw material consumption of neodymium is relatively low, whereas embedded demand is comparatively high. This reflects the lack of industrial capacity to process REE concentrates into magnet material combined with the US's high imports of products that contain rare earth permanent magnets.

Journal of Industrial Ecology↗

USGS1991

Use of longitudinal strain in identifying driving and resisting elements of landslides

Observations of deformation at the surfaces of landslides in Utah and Hawaii indicate that the upslope parts of the land-slides have stretched and the downslope parts have shortened parallel with the direction of movement. The maximum displacement of each landslide occurs in a relatively undeformed zone between the zones of shortening and stretching. The pattern of deformation at the surface of these landslides may be useful in analyzing their mechanics by helping to constrain the longitudinal forces in limit-equilibrium stability analysis. We used earth-pressure calculations to determine the range of possible longitudinal forces (per unit width) for active failure in the zone of stretching and for passive failure in the zone of shortening of one of the Hawaiian landslides. Longitudinal forces computed by stability analysis, assuming homogeneous strength, exceeded the possible forces in much of the upslope half of the landslide. Consequently, we assumed inhomogeneous strength and adjusted shear-strength parameters at each segment of the slip surface until the longitudinal forces computed by stability analysis agreed with those computed by earth-pressure theory, and the factor of safety approached unity. The distribution of longitudinal forces computed for inhomogeneous strength indicated that the boundary between driving and resisting elements of the landslide is near the thickest part of the slide, in agreement with a simple formula for the location of the boundary.

Geological Society of America Bulletin↗

USGS1995

Minor elements in Quaternary sediment from the Sea of Japan: A record of surface-water productivity and intermediate-water redox conditions

Sediment of Quaternary age from Oki Ridge (903 m depth) in the Sea of Japan (∼3500 m deep) records six episodes of high accumulation rates of Cd, Cr, Cu, Mo, Ni, U, V, and Zn. The high rates correspond to periods of sulfate reduction in the water column at the intermediate depth of Oki Ridge; the intervening low values correspond to periods of denitrification and oxygen respiration. The maxima have a period of 41 k.y., the youngest having an age of 1.10 Ma. The 41 k.y. cycle is similar to the cycle of δ 18 O values of open-ocean plankton of the same age. The similarity between the cycles of minor-element accumulation in Sea of Japan sediment and δ 18 O values of Atlantic Ocean foraminifera indicates that redox changes in the water column of the Sea of Japan during the Quaternary, forced by major shifts in water-column advection and minor shifts in photic-zone productivity, reflect global events.

Geological Society of America Bulletin↗

USGS2006

From wetlands to wet spots: Environmental tracking and the fate of carboniferous elements in early permian tropical fl oras

Diverse wetland vegetation flourished at the margins of the Midland Basin in north-central Texas during the Pennsylvanian Period. Extensive coastal swamps and an ever-wet, tropical climate supported lush growth of pteridosperm, marattialean fern, lycopsid, and calamite trees, and a wide array of ground cover and vines. As the Pennsylvanian passed into the Permian, the climate of the area became drier and more seasonal, the great swamps disappeared regionally, and aridity spread. The climatic inferences are based on changes in sedimentary patterns and paleosols as well as the general paleobotanical trends. The lithological patterns include a change from a diverse array of paleosols, including Histosols (ever-wet waterlogged soils), in the late Pennsylvanian to greatly diminished paleosol diversity with poorly developed Vertisols by the Early-Middle Permian transition. In addition, coal seams were present with wide areal distribution in the late Pennsylvanian whereas beds of evaporates were common by the end of the Early Permian. During this climatic transition, wetland plants were confi ned to shrinking "wet spots" found along permanent streams where the vegetation they constituted remained distinct if increasingly depauperate in terms of species richness. By Leonardian (late Early Permian) time, most of the landscape was dominated by plants adapted to seasonal drought and a deep water table. Wetland elements were reduced to scattered pockets, dominated primarily by weedy forms and riparian specialists tolerant of flooding and burial. By the Middle Permian, even these small wetland pockets had disappeared from the region. ?? 2006 Geological Society of America.

Special Paper of the Geological Society of America↗

USGS1990

Chapter 21: Neodymium, strontium, and trace-element evidence of crustal anatexis and magma mixing in the Idaho batholith

Variations in initial 143 Nd/ 144 Nd in Late Cretaceous plutonic rocks along the South Fork of the Clearwater River (SFCR) supplement results of Sr and O studies, which demonstrate large-scale mixing in magmas forming the western margin of the Idaho batholith. These marginal or border phases of the batholith span the terrane boundary between Proterozoic crust of North America and late Paleozoic-Mesozoic intraoceanic arc terranes (WSD terranes), delineated by the Western Idaho suture zone (or WISZ). ɛ Nd (t) values in Early Cretaceous and older, pre-accretionary plutons of the WSD range from +3 to +7.6, and average +5.7. Proterozoic orthogneisses and metasedimentary rocks range from -7.4 to -13.7 and -10.45 to -15.7, respectively. ɛ Nd (t) in Late Cretaceous plutons of the SFCR decreases abruptly from west to east near the WISZ, varying inversely with ɛSr (t) . Although Sr isotopic evidence (Fleck and Criss, 1985) is consistent with a binary mixing model, Sm-Nd results modify those conclusions, suggesting that SFCR plutons may be divided into three groups. Group 1 plutons occur in a narrow zone (<4 km width) along the suture zone (WISZ). These bodies probably represent at least three-component mixtures of very high-Sr, arc-type magmas, one or more Proterozoic crustal components that may include lower crust, and a high-Nb, high-Zr component. Group 2 plutons are characterized by high ɛSr (t) .and nearly constant, low ɛNd (t) . These bodies are thought to represent mixtures of deep-seated partial melts of two different Proterozoic lithospheric types, possibly representing upper and lower crust. Plutons belonging to Group 3 have ɛNd (t) .values <-14 and probably incorporated substantial amounts of Proterozoic metasedimentary rocks, but mixing components are poorly defined. Trace-element variations in SFCR rocks also reflect the arc terrane-continental crustal boundary as Nb, Zr, and Nd increase dramatically, whereas Sr, Rb/Nb, and Sm/Nd exhibit coincident decreases east of the WISZ. Modeling of these variations with the isotopic variations in Nd and Sr supports mixing, but precludes contamination-bulk-assimilation models. Correlated ɛNd, ɛSr, and δ 18 O within the SFCR favors mixing of crustal and subcrustal magmas rather than derivation of the melts entirely from subcontinental lithosphere.

Idaho↗

USGS2021

Arctic Alaska Basin, Hanna Trough and Beaufortian Rifted Margin Composite Tectono-Sedimentary Elements

The Arctic Alaska Composite Tectono-Sedimentary Element (AA CTSE) as defined for this volume comprises Mississippian to Lower Cretaceous strata beneath the Alaska North Slope and the Beaufort and Chukchi Seas of the Arctic Ocean. The AA CTSE rests on Devonian and older sedimentary and metasedimentary rocks, considered economic basement for petroleum, and is overlain by Cretaceous to Cenozoic syntectonic strata deposited in the foreland of the Chukotka and Brooks Range orogens. The Mississippian – Triassic part of the AA CTSE is divided into a fold-and-thrust belt in the south and a relatively undeformed platform in the north. The Jurassic – Lower Cretaceous part of the AA CTSE is divided into synrift basins in the north and rift-shoulder deposits in the south. The AA CTSE includes oil-prone source rocks in the Triassic, Jurassic, and Cretaceous and proven reservoir rocks spanning the Mississippian to Lower Cretaceous. Much of the central part of the AA CTSE lies in the oil window whereas the northern and southern parts are mainly in the gas window. Known hydrocarbon accumulations in the AA CTSE total more than 30 billion barrels of oil equivalent and yet-to-find estimates suggest a similar volume remains to be discovered

Alaska↗

USGS2022

Colville Foreland Basin and Arctic Alaska Prograded Margin Tectono-Sedimentary Elements, northern Alaska and southwestern Canada Basin

Cretaceous (post-Neocomian)–Quaternary Brookian strata of Arctic Alaska include the Colville Foreland Basin (CFB) and Arctic Alaska Prograded Margin (AAPM) Tectono-Sedimentary Elements (TSEs). The CFB TSE lies beneath the Alaska North Slope and Chukchi Sea shelf, and the AAPM TSE lies beneath the Arctic Alaska continental terrace of the Beaufort Sea shelf and slope. The CFB TSE rests on rocks ranging from pre-Mississippian sedimentary and metasedimentary rocks (Franklinian sequence) to Lower Cretaceous strata, and is present at the land surface onshore and the seafloor offshore. The AAPM TSE generally rests on Lower Cretaceous (Neocomian) sedimentary strata and is present at the seafloor. The CFB and AAPM TSEs contain oil-prone source rocks in Cretaceous and Paleogene strata, and have been charged locally by hydrocarbon migration from pre-Brookian strata. Both TSEs contain proven reservoir rocks throughout the succession. The CFB TSE ranges from oil-window to gas-window maturity. The AAPM TSE is mainly in the gas window. Known hydrocarbon accumulations in the two TSEs total more than 3.4 Bbbl of oil equivalent and yet-to-find estimates suggest an even larger volume remains undiscovered. Current exploration is focused on shallow stratigraphic traps, in which giant oil accumulations have been discovered in recent years.

Alaska↗

USGS2023

Canada Basin tectono-sedimentary element, Arctic Ocean

The Canada Basin (CB) formed during a short period of seafloor spreading inferred to be Early Cretaceous in age. Brookian strata of inferred Early Cretaceous–Holocene age comprise the sedimentary fill of the Canada Basin Tectono-Sedimentary Element (CB TSE). Although the CB has remained tectonically quiet since seafloor spreading ceased, both proximal and distal tectonism (Alpha Ridge magmatism, and the Cordilleran, Brooks Range and Eurekan orogenies) have influenced sediment source areas, dispersal paths and thicknesses in the basin. In the Neogene, the dominant source of sediments was the Mackenzie River, which drains northern portions of the Cordilleran orogen. The CB TSE is one of the most remote and challenging places on Earth to explore. Although regional seismic reflection and refraction data exist, there are no boreholes to constrain interpretations. Existing published estimates of hydrocarbon potential range from limited to moderate to significant.

Geological Society of London Monograph, Arctic Sed↗

USGS2021

Integrated geophysical imaging of rare-earth-element-bearing iron oxide-apatite deposits in the eastern Adirondack Highlands, New York

The eastern Adirondack Highlands of northern New York host dozens of iron oxide-apatite (IOA) deposits containing magnetite and rare earth element (REE)-bearing apatite. We use new aeromagnetic, aeroradiometric, ground gravity, and sample petrophysical and geochemical data to image and understand these deposits and their geologic framework. Aeromagnetic total field data reflect highly magnetic leucogranite host rock and major structures that likely served as fluid conduits for the hydrothermal system. Bandpass filtering of the aeromagnetic data reveals individual deposits that were verified in the field or from historical records. A three-dimensional inversion for magnetic susceptibility images these deposits at depth, allowing inference of plunge directions and relative size. Radiometric data highlight variations in the surface geology and several large tailings piles that contain REE-bearing apatite. Within the host rock, eTh (equivalent Th), K and the eTh/K ratio are variable with high eTh/K near several of the IOA deposits. Areas with elevated K or low eTh/K representing potassic alteration appear to be rare; instead elevated eTh/K ratios likely reflect widespread sodic alteration overprinting potassic alteration. Bouguer gravity anomalies show limited correspondence to the surface geology, radiometric data, or magnetic data, but do exhibit ~10-km wide highs in areas where deposits are observed. Two-dimensional forward models of the gravity and magnetic data show that deeper dense material beneath the leucogranite is quantitatively feasible. If these dense rocks represent intrusions that were emplaced or still cooling at the time of mineralization, they may have served as a heat source that helped to drive the hydrothermal system. Combining datasets, we find that deposits occur towards the distal ends of major structures within the host leucogranite and mostly above gravity highs. The geophysical modeling thus suggests that IOA deposits formed in structural, thermal, and chemical traps near the distal ends of the hydrothermal system.

New York↗

USGS2014

Geophysical expression of a buried niobium and rare earth element deposit: the Elk Creek carbonatite, Nebraska, USA

The lower Paleozoic Elk Creek carbonatite is a 6–8-km-diameter intrusive complex buried under 200 m of sedimentary rocks in southeastern Nebraska. It hosts the largest known niobium deposit in the U.S. and a rare earth element (REE) deposit. The carbonatite is composed of several lithologies, the relations of which are poorly understood. Niobium mineralization is most enriched within a magnetite beforsite (MB) unit, and REE oxides are most concentrated in a barite beforsite unit. The carbonatite intrudes Proterozoic country rocks. Efforts to explore the carbonatite have used geophysical data and drilling. A high-resolution airborne gravity gradient and magnetic survey was flown over the carbonatite in 2012. The carbonatite is associated with a roughly annular vertical gravity gradient high and a subdued central low and a central magnetic high surrounded by magnetic field values lower than those over the country rocks. Geophysical, borehole, and physical property data are combined for an interpretation of these signatures. The carbonatite is denser than the country rocks, explaining the gravity gradient high. Most carbonatite lithologies have weaker magnetic susceptibilities than those of the country rocks, explaining why the carbonatite does not produce a magnetic high at its margin. The primary source of the central magnetic high is interpreted to be mafic rocks that are strongly magnetized and are present in large volumes. MB is very dense (mean density 3200 kg/m 3 ) and strongly magnetized (median 0.073 magnetic susceptibility), producing a gravity gradient high and contributing to the aeromagnetic high. Barite beforsite has physical properties similar to most of the carbonatite volume, making it a poor geophysical target. Geophysical anomalies indicate the presence of dense and strongly magnetized rocks at depths below existing boreholes, either a large volume of MB or another unknown lithology.

Nebraska↗

USGS2014

Geophysical interpretation of U, Th, and rare earth element mineralization of the Bokan Mountain peralkaline granite complex, Prince of Wales Island, southeast Alaska

A prospectivity map for rare earth element (REE) mineralization at the Bokan Mountain peralkaline granite complex, Prince of Wales Island, southeastern Alaska, was calculated from high-resolution airborne gamma-ray data. The map displays areas with similar radioelement concentrations as those over the Dotson REE-vein-dike system, which is characterized by moderately high %K, eU, and eTh (%K, percent potassium; eU, equivalent parts per million uranium; and eTh, equivalent parts per million thorium). Gamma-ray concentrations of rocks that share a similar range as those over the Dotson zone are inferred to locate high concentrations of REE-bearing minerals. An approximately 1300-m-long prospective tract corresponds to shallowly exposed locations of the Dotson zone. Prospective areas of REE mineralization also occur in continuous swaths along the outer edge of the pluton, over known but undeveloped REE occurrences, and within discrete regions in the older Paleozoic country rocks. Detailed mineralogical examinations of samples from the Dotson zone provide a means to understand the possible causes of the airborne Th and U anomalies and their relation to REE minerals. Thorium is sited primarily in thorite. Uranium also occurs in thorite and in a complex suite of ± Ti ± Nb ± Y oxide minerals, which include fergusonite, polycrase, and aeschynite. These oxides, along with Y-silicates, are the chief heavy REE (HREE)-bearing minerals. Hence, the eU anomalies, in particular, may indicate other occurrences of similar HREE-enrichment. Uranium and Th chemistry along the Dotson zone showed elevated U and total REEs east of the Camp Creek fault, which suggested the potential for increased HREEs based on their association with U-oxide minerals. A uranium prospectivity map, based on signatures present over the Ross-Adams mine area, was characterized by extremely high radioelement values. Known uranium deposits were identified in the U-prospectivity map, but the largest tract occurs over a radioelement-rich granite phase within the pluton that is likely not related to mineralization. Neither mineralization type displays a well-defined airborne magnetic signature.

Alaska↗

USGS2020

Assessing uranium and select trace elements associated with breccia pipe uranium deposits in the Colorado River and main tributaries in Grand Canyon, USA

Assessing chemical loading from streams in remote, difficult-to-access watersheds is challenging. The Grand Canyon area in northern Arizona, an international tourist destination and sacred place for many Native Americans, is characterized by broad plateaus divided by canyons as much as two-thousand meters deep and hosts some of the highest-grade uranium deposits in the U.S. From 2015–2018 major surface waters in Grand Canyon were monitored for select elements associated with breccia-pipe uranium deposits in the area, including uranium, arsenic, cadmium, and lead. Dissolved constituents in the Colorado River were monitored upstream (Lees Ferry), in the middle (Phantom Ranch), and downstream (Diamond Creek) of uranium mining areas. Concentrations of uranium, arsenic, cadmium, and lead at these main-stem sites varied little during the study period and were all well below human health and aquatic life benchmark criteria (30, 10, 5, and 15 μg/L maximum contaminant levels and 15, 150, 0.8, and 3.1 μg/L aquatic life criteria, respectively). Additionally, dissolved and sediment-bound constituents were monitored during a wide range of streamflow conditions at Little Colorado River, Kanab Creek, and Havasu Creek tributaries, whose watersheds have experienced different levels of uranium mining activities over time. Samples from the tributary sites contained ≤3.8 μg/L of dissolved cadmium and lead, and ≤17 μg/L of dissolved uranium. Dissolved arsenic also was mostly below human and aquatic life criteria at Little Colorado River and Kanab Creek; however, 63% of water samples from Havasu Creek were above the maximum contaminant level for arsenic. Arsenic in suspended sediment was greater than sediment quality guidelines in 9%, 35%, and 35% of samples from Little Colorado River, Kanab Creek, and Havasu Creek, respectively. At the concentrations observed during this study, tributaries contributed on average only about 0.12 μg/L of arsenic and 0.03 μg/L of uranium to the main-stem river. This study demonstrates how chemical loading from mined watersheds may be reliably assessed across a wide range of flow conditions in challenging locations.

Arizona↗

USGS2019

U-Pb and Lu-Hf isotope, age, and trace-element data from zircons at four sites in the western Alaska Range and Talkeetna Mountains, Alaska

This Division of Geological & Geophysical Surveys (DGGS) Raw Data File presents U-Pb geochronology and Lu-Hf isotopic compositions, age-dating results, and additional trace-elemental composition of zircons from four granitoids sampled during investigations by DGGS geologists in the western Alaska Range and the Talkeetna Mountains. The purpose of the Lu-Hf and U-Pb isotopic study was to better understand the Jurassic through early Tertiary magmatic and tectonic evolution of the Alaska Range and the significance of that magmatism for the formation of metallic mineral deposits. The U-Pb isotopic data also serve to further refine the crystallization age of plutons, which were previously ambiguous in 40Ar/39Ar geochronology studies.

Alaska↗

USGS2016

Isotopic compositions of the elements 2013 (IUPAC Technical Report)

The Commission on Isotopic Abundances and Atomic Weights (ciaaw.org) of the International Union of Pure and Applied Chemistry (iupac.org) has revised the Table of Isotopic Compositions of the Elements (TICE). The update involved a critical evaluation of the recent published literature. The new TICE 2013 includes evaluated data from the “best measurement” of the isotopic abundances in a single sample, along with a set of representative isotopic abundances and uncertainties that accommodate known variations in normal terrestrial materials.

Pure and Applied Chemistry↗