Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS2022

Spatial distribution and physicochemical properties of respirable volcanic ash from the 16-17 August 2006 Tungurahua eruption (Ecuador), and alveolar epithelium response in-vitro

Tungurahua volcano (Ecuador) intermittently emitted ash between 1999 and 2016, enduringly affecting the surrounding rural area and its population, but its health impact remains poorly documented. We aim to assess the respiratory health hazard posed by the 16–17 August 2006 most intense eruptive phase of Tungurahua. We mapped the spatial distribution of the health-relevant ash size fractions produced by the eruption in the area impacted by ash fallout. We quantified the mineralogy, composition, surface texture, and morphology of a respirable ash sample isolated by aerodynamic separation. We then assessed the cytotoxicity and pro-inflammatory potential of this respirable ash toward lung tissues in-vitro using A549 alveolar epithelial cells, by electron microscopy and biochemical assays. The eruption produced a high amount of inhalable and respirable ash (12.0–0.04 kg/m 2 of sub-10 μm and 5.3–0.02 kg/m 2 of sub-4 μm ash deposited). Their abundance and proportion vary greatly across the deposit within the first 20 km from the volcano. The respirable ash is characteristic of an andesitic magma and no crystalline silica is detected. Morphological features and surface textures are complex and highly variable, with few fibers observed. In-vitro experiments show that respirable volcanic ash is internalized by A549 cells and processed in the endosomal pathway, causing little cell damage, but resulting in changes in cell morphology and membrane texture. The ash triggers a weak pro-inflammatory response. These data provide the first understanding of the respirable ash hazard near Tungurahua and the extent to which it varies spatially in a fallout deposit.

GeoHealth↗
USGS2023

Microscale spatial variations in coseismic temperature rise on hematite fault mirrors in the Wasatch fault damage zone

Coseismic temperature rise activates fault dynamic weakening that promotes earthquake rupture propagation. The spatial scales over which peak temperatures vary on slip surfaces are challenging to identify in the rock record. We present microstructural observations and electron backscatter diffraction data from three small-displacement hematite-coated fault mirrors (FMs) in the Wasatch fault damage zone, Utah, to evaluate relations between fault properties, strain localization, temperature rise, and weakening mechanisms during FM development. Millimeter- to cm-thick, matrix-supported, hematite-cemented breccia is cut by ∼25–200 μm-thick, texturally heterogeneous veins that form the hematite FM volume (FMV). Grain morphologies and textures vary with FMV thickness over μm to mm lengthscales. Cataclasite grades to ultracataclasite where FMV thickness is greatest. Thinner FMVs and geometric asperities are characterized by particles with subgrains, serrated grain boundaries, and(or) low-strain polygonal grains that increase in size with proximity to the FM surface. Comparison to prior hematite deformation experiments suggests FM temperatures broadly range from ≥400°C to ≥800–1100°C, compatible with observed coeval brittle and plastic deformation mechanisms, over sub-mm scales on individual slip surfaces during seismic slip. We present a model of FM development by episodic hematite precipitation, fault reactivation, and strain localization, where the thickness of hematite veins controls the width of the deforming zones during subsequent fault slip, facilitating temperature rise and thermally activated weakening. Our data document intrasample coseismic temperatures, resultant deformation and dynamic weakening mechanisms, and the length scales over which these vary on slip surfaces.

Utah↗
USGS2024

Versatile modeling of deformation (VMOD) inversion framework: Application to 20 years of observations at Westdahl Volcano and Fisher Caldera, Alaska, US

We developed an open source, extensible Python-based framework, that we call the Versatile Modeling of Deformation (VMOD), for forward and inverse modeling of crustal deformation sources. VMOD abstracts from specific source model implementations, data types and inversion methods. We implement the most common geodetic source models which can be combined to model and analyze multi-source deformation. VMOD supports Global Navigation Satellite System (GNSS), InSAR, electronic distance measurement, Leveling and tilt data. To infer source characteristics from observations, VMOD implements non-linear least squares and Markov Chain Monte-Carlo Bayesian inversions, including joint inversions using different sources of data. VMOD's structure allows for easy integration of new geodetic models, data types, and inversion strategies. We benchmark the forward models against other published results and the inversion approaches against other implementations. We apply VMOD to analyze deformation at Unimak Island, Alaska, observed with continuous and campaign GNSS, and ascending and descending InSAR time series generated from Sentinel-1 satellite radar acquisitions. These data show an inflation pattern at Westdahl volcano and subsidence at Fisher Caldera. We use VMOD to test a range of source models by jointly inverting the GNSS and InSAR data sets. Our final model simultaneously constrains the parameters of two sources. Our results reveal a depressurizing spheroid under Fisher Caldera ∼4–6 km deep, contracting at a rate of ∼2–3 Mm 3 /yr, and a pressurizing spherical source underneath Westdahl volcano ∼6–8 km deep, inflating at ∼5 Mm 3 /yr. This and past applications of VMOD to volcanic unrest benefit from an extensible framework which supports jointly inversions of data sets for parameters of easily composable multi-source models.

Alaska↗
USGS2025

Organic matter availability and the production of methane-derived dissolved organic carbon at methane seeps

Methane seeps located along continental margins and slopes export sedimentary methane and dissolved organic carbon (DOC) into the ocean. The flux of these reduced carbon molecules from the seafloor into the ocean impacts ocean chemistry and supports deep-sea life. While significant effort has been made to understand how the anaerobic oxidation of methane (AOM) regulates the release of methane from the seafloor, little is known about the production of DOC in association with AOM or its flux and fate in the ocean. We hypothesize a mechanism for methane incorporation into DOC at seeps and investigate the relationship between sediment total organic carbon (TOC) availability and the incorporation of methane-derived carbon into DOC at four methane seep regions along the Cascadia margin, with a range of microbial and thermogenic methane sources. At sites with <2.0 wt.% TOC (Hydrate Ridge and Bullseye Vent), up to 60%–80% of carbon in DOC is methane-carbon, much more than sites with >2.0 wt.% TOC (Astoria Canyon and Barkley Canyon). We attribute the greater methane contribution at the more TOC-limited sites to a greater role of AOM in the carbon cycle, whereas at the organic matter-rich sites, microbial competition for sulfate as an electron acceptor for organic matter decomposition limits AOM and hence the transfer of carbon from methane to DOC. We estimate that the global diffusive flux of methane-derived DOC from the seafloor is 0.07–10.1 Tg C/yr, contributing to the stock of DOC present in the deep ocean and/or fueling the deep-sea microbial loop.

California, Oregon, Washington↗
USGS2010

Use of chlorofluorocarbons (CCl3F and CCl2F2) as hydrologic tracers and age‐dating tools: The alluvium and terrace system of central Oklahoma

The use of Chlorofluorocarbons (CFCs) as an age‐dating tool and tracer in shallow groundwaters has been investigated. New methodology for field sampling and preserving groundwaters containing parts per trillion concentrations of the CFCs, F‐1l and F‐12, is presented. Samples are analyzed by purge‐and‐trap gas chromatography with an electron capture detector. Physical and chemical processes that can alter natural concentrations (air‐water equilibrium) of CFCs were investigated to assess dating uncertainties. CFC model recharge ages appear to be defined within 2 years under optimum conditions. The method was applied to central Oklahoma to demonstrate the usefulness of CFCs as (1) an age‐dating tool of shallow groundwaters, (2) a tracer of sewage effluent in surface and shallow groundwaters, and (3) a tracer of shallow groundwater. Results of dating indicate two primary recharge periods in central Oklahoma over the past 45 years that correspond to the wet periods 1945–1960 and 1967–1975.

Water Resources Research↗
USGS1996

Crustal velocity field near the big bend of California's San Andreas fault

We use geodetic data spanning the 1920–1992 interval to estimate the horizontal velocity field near the big bend segment of California's San Andreas fault (SAF). More specifically, we estimate a horizontal velocity vector for each node of a two-dimensional grid that has a 15-min-by-15-min mesh and that extends between latitudes 34.0°N and 36.0°N and longitudes 117.5°W and 120.5°W. For this estimation process, we apply bilinear interpolation to transfer crustal deformation information from geodetic sites to the grid nodes. The data include over a half century of triangulation measurements, over two decades of repeated electronic distance measurements, a decade of repeated very long baseline interferometry measurements, and several years of Global Positioning System measurements. Magnitudes for our estimated velocity vectors have formal standard errors ranging from 0.7 to 6.8 mm/yr. Our derived velocity field shows that (1) relative motion associated with the SAF exceeds 30 mm/yr and is distributed on the Earth's surface across a band (>100 km wide) that is roughly centered on this fault; (2) when velocities are expressed relative to a fixed North America plate, the motion within our primary study region has a mean orientation of N44°W ± 2° and the surface trace of the SAF is congruent in shape to nearby contours of constant speed yet this trace is oriented between 5° and 10° counterclockwise relative to these contours; and (3) large strain rates (shear rates > 150 nrad/yr and/or areal dilatation rates < −150 nstr/yr) exist near the Garlock fault, near the White Wolf fault, and in the Ventura basin.

Journal of Geophysical Research B: Solid Earth↗
USGS2010

Deep subsurface microbial processes

Information on the microbiology of the deep subsurface is necessary in order to understand the factors controlling the rate and extent of the microbially catalyzed redox reactions that influence the geophysical properties of these environments. Furthermore, there is an increasing threat that deep aquifers, an important drinking water resource, may be contaminated by man's activities, and there is a need to predict the extent to which microbial activity may remediate such contamination. Metabolically active microorganisms can be recovered from a diversity of deep subsurface environments. The available evidence suggests that these microorganisms are responsible for catalyzing the oxidation of organic matter coupled to a variety of electron acceptors just as microorganisms do in surface sediments, but at much slower rates. The technical difficulties in aseptically sampling deep subsurface sediments and the fact that microbial processes in laboratory incubations of deep subsurface material often do not mimic in situ processes frequently necessitate that microbial activity in the deep subsurface be inferred through nonmicrobiological analyses of ground water. These approaches include measurements of dissolved H 2 , which can predict the predominant microbially catalyzed redox reactions in aquifers, as well as geochemical and groundwater flow modeling, which can be used to estimate the rates of microbial processes. Microorganisms recovered from the deep subsurface have the potential to affect the fate of toxic organics and inorganic contaminants in groundwater. Microbial activity also greatly influences the chemistry of many pristine groundwaters and contributes to such phenomena as porosity development in carbonate aquifers, accumulation of undesirably high concentrations of dissolved iron, and production of methane and hydrogen sulfide. Although the last decade has seen a dramatic increase in interest in deep subsurface microbiology, in comparison with the study of other habitats, the study of deep subsurface microbiology is still in its infancy.

Reviews of Geophysics↗
USGS1997

Correlated errors in geodetic time series: Implications for time-dependent deformation

Analysis of frequent trilateration observations from the two-color electronic distance measuring networks in California demonstrate that the noise power spectra are dominated by white noise at higher frequencies and power law behavior at lower frequencies. In contrast, Earth scientists typically have assumed that only white noise is present in a geodetic time series, since a combination of infrequent measurements and low precision usually preclude identifying the time-correlated signature in such data. After removing a linear trend from the two-color data, it becomes evident that there are primarily two recognizable types of time-correlated noise present in the residuals. The first type is a seasonal variation in displacement which is probably a result of measuring to shallow surface monuments installed in clayey soil which responds to seasonally occurring rainfall; this noise is significant only for a small fraction of the sites analyzed. The second type of correlated noise becomes evident only after spectral analysis of line length changes and shows a functional relation at long periods between power and frequency of 1/ƒ α , where ƒ is frequency and α≈2. With α=2, this type of correlated noise is termed random-walk noise, and its source is mainly thought to be small random motions of geodetic monuments with respect to the Earth's crust, though other sources are possible. Because the line length changes in the two-color networks are measured at irregular intervals, power spectral techniques cannot reliably estimate the level of 1/ƒ α noise. Rather, we also use here a maximum likelihood estimation technique which assumes that there are only two sources of noise in the residual time series (white noise and random-walk noise) and estimates the amount of each. From this analysis we find that the random-walk noise level averages about 1.3 mm/√yr and that our estimates of the white noise component confirm theoretical limitations of the measurement technique. In addition, the seasonal noise can be as large as 3 mm in amplitude but typically is less than 0.5 mm. Because of the presence of random-walk noise in these time series, modeling and interpretation of the geodetic data must account for this source of error. By way of example we show that estimating the time-varying strain tensor (a form of spatial averaging) from geodetic data having both random-walk and white noise error components results in seemingly significant variations in the rate of strain accumulation; spatial averaging does reduce the size of both noise components but not their relative influence on the resulting strain accumulation model.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Continuous monitoring of surface deformation at Long Valley Caldera, California, with GPS

Continuous Global Positioning System (GPS) measurements at Long Valley Caldera, an active volcanic region in east central California, have been made on the south side of the resurgent dome since early 1993. A site on the north side of the dome was added in late 1994. Special adaptations for autonomous operation in remote regions and enhanced vertical precision were made. The data record ongoing volcanic deformation consistent with uplift and expansion of the surface above a shallow magma chamber. Measurement precisions (1 standard error) for “absolute” position coordinates, i.e., relative to a global reference frame, are 3–4 mm (north), 5–6 mm (east), and 10–12 mm (vertical) using 24 hour solutions. Corresponding velocity uncertainties for a 12 month period are about 2 mm/yr in the horizontal components and 3–4 mm/yr in the vertical component. High precision can also be achieved for relative position coordinates on short (less than 10 km) baselines using broadcast ephemerides and observing times as short as 3 hours, even when data are processed rapidly on site. Comparison of baseline length changes across the resurgent dome between the two GPS sites and corresponding two-color electronic distance measurements indicates similar extension rates within error (∼2 mm/yr) once we account for a random walk noise component in both systems that may reflect spurious monument motion. Both data sets suggest a pause in deformation for a 3.5 month period in mid-1995, when the extension rate across the dome decreased essentially to zero. Three dimensional positioning data from the two GPS stations suggest a depth (5.8±1.6 km) and location (west side of the resurgent dome) of a major inflation center, in agreement with other geodetic techniques, near the top of a magma chamber inferred from seismic data. GPS systems similar to those installed at Long Valley can provide a practical method for near real-time monitoring and hazard assessment on many active volcanoes.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Magnetic effects of maghemitization of oceanic crust

Both theoretical considerations and available experimental results indicate that magnetic effects of maghemitization are strongly dependent on the grain size of the originally unoxidized titanomagnetite. Maghemitization of single‐domain titanomagnetite results in a decrease in coercivity, an increase in susceptibility, and a large decrease in Q ratio. Maghemitization of multidomain titanomagnetite results in an increase in coercivity, a decrease in susceptibility, and no large changes in Q ratio. Single‐domain titanomagnetite is probably resistant to the development of a chemical remanent magnetization (CRM), whereas multidomain titanomagnetite can acquire a CRM during maghemitization. The behavior of pseudo‐single‐domain titanomagnetite, which is the main carrier of remanence in submarine extrusive rocks, is investigated by comparing the magnetic properties of the French‐American Mid‐Ocean Undersea Study (FAMOUS) (less than 0.1 m.y. old) and the Leg 37 (3.5 m.y. old) pillow basalts recovered from the Mid‐Atlantic Ridge near 37°N. Combining electron microprobe analyses, Curie temperature measurements, and cell edge determinations, we find that the FAMOUS rocks are already oxidized ( z = 0.38), possibly as a result of some high‐temperature maghemitization during cooling of the magma. Comparison with the more highly oxidized ( z = 0.7) Leg 37 pillow basalts indicates that low‐temperature maghemitization of such rocks does not result in appreciable changes of coercivity and susceptibility, although the Q ratio does decrease and CRM seems to be acquired. Such a CRM could account for the anomalously low magnetic inclinations observed at most of the Leg 37 sites.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Chemistry of rock-forming minerals of the Cretaceous-Paleocene batholith in southwestern Japan and implications for magma genesis

Petrographic descriptions and electron microprobe analyses of minerals are presented for 35 specimens from seven suites chosen to examine the transition from magnetite series to ilmenite series granitoids along two transects across the Cretaceous-Paleocene Inner Zone batholith of southwestern Japan. Regularities in chemical compositions of amphiboles, biotites, and feldspars suggest that fundamentally similar processes produced the magmas that formed the two series. Constant or decreasing Fe/(Fe+Mg) for biotites and amphiboles with increasing host rock silica content, coupled with the absence of early formed magnetite and sphene, suggest that magnetite series rocks may have become oxidized during crystallization near the level of intrusion, through the processes of second boiling and differential loss of hydrogen. For the Daito-Yokota, magnetite series suite, Fe/(Fe+Mg) for biotites decreased from 0.48 to 0.37 as SiO 2 content of the host rock increased from 55.3 to 75.5 wt %; for an ilmenite series suite from the Takanawa Peninsula, Fe/(Fe+Mg) for biotites increased from 0.51 to 0.77 with an increase in host rock SiO 2 from 53.4 to 75.5. Detailed consideration of amphibole chemistry shows predominance of edenitic and tschermakitic substitution schemes as well as coupling between substitutions of Ti in octahedral sites and Al IV . Interrelations between amphibole and biotite chemistry show that Fe/(Fe+Mg) and Mn contents can be interpreted in terms of equilibration, whereas Ti content cannot. The chemistry of chlorites correlates well with that of biotites; primary and secondary muscovites are distinct in composition. Plagioclase in all studied suites shows igneous zoning appropriate to host rock composition; perthitic alkali feldspars in all samples have lost albite component, and temperatures based on the two-feldspar geothermometer are low. The biotite-apatite geothermometer is also inoperative for this group of samples because fully fluorinated apatites typically occur in biotites of modest F content. Whereas magnetites have reequilibrated, analyses of ilmenites for the representative Daito-Yokota and Takanawa suites corroborate biotite compositional data and suggest that f O2 probably differed by 2 to 3 orders of magnitude during crystallization of silica-rich magnetite and ilmenite series granites. Whole-rock chemistry supports mineral chemistry in suggesting that the studied granitoids have crystallized from magmas generated in a lower crustal environment in which mantle-derived magmas partially melted source materials with igneous characteristics.

Journal of Geophysical Research Solid Earth↗
USGS2012

Petrology and comparative thermal and mechanical histories of clasts in breccia 62236

Lunar breccia 62236 contains large lithic fragments of troctolite, norite, and anorthosite. The mafic phases, olivine, inverted pigeonite, and augite, fill interstitial areas between larger plagioclases and appear to be cumulate phases with extensive adcumulus growth. Pyroxene compositional homogeneity indicates that cation exchange during cooling was limited to an area of about 1 mm. Primary augite and pigeonite both contain 30 μm-wide lamellae of the other along ‘001’. Pigeonite inverted to orthopyroxene without retaining any crystallographic orientation and subsequently exsolved fine lamellae of augite on (100). Profiles across orthopyroxene-augite interfaces obtained in the analytical transmission electron microscope show an increase of ∼5% wollastonite in augite within 0.5 μm of the interface, suggesting that short-range cation exchange continued to temperatures below 500°C. The entire sample has undergone heterogeneous shock deformation. Shock melting of the troctolitic clast suggests pressures of 200–300 kb and well-developed basal twinning in augite from the norite clasts suggests pressures of 50–300 kbars. The present evidence indicates that 62236 contains parts of a slowly cooled microlayered adcumulate that has been heterogeneously shocked several times and combined into the present breccia.

Journal of Geophysical Research Solid Earth↗
USGS2012

Deformation of clinopyroxenite: Evidence for a transition in flow mechanisms and semibrittle behavior

A systematic suite of constant strain rate experiments was performed on a vacuum-dried, high-purity, fine-grained clinopyroxenite using NaCl and NaF as confining media in a Griggs-type piston-cylinder apparatus. The experiments were carried out over a range of temperatures from 400° to 1100°C, strain rates from 10 −3 to 10 −7 s −1 , and confining pressures from 170 to 1990 MPa. At T = 600°C and = 1.1 × 10 −5 s −1 , three modes of deformation occur with increasing confining pressure: (1) Macroscopic faulting associated with low strength and stress drops, (2) stable microfracturing and plastic deformation associated with pressure-dependent strength, and (3) plastic deformation (mechanical twinning and 〈001〉 slip) with high strengths which are insensitive to pressure variations. In experiments at P = 1500 MPa, within this high-pressure plastic mode, two regimes of flow are clearly defined. At low to intermediate temperatures and high strain rates, flow strengths are insensitive to changes in strain rate and temperature. Optical and transmission electron microscope observations indicate that plastic strain is accomplished by mechanical twinning on (100) and (001) and by {100}〈001〉 slip. In contrast, at high temperatures and low strain rates the flow stress is strongly dependent on temperature and strain rate. Specimens deformed in this regime show evidence of recovery, multiple slip, and recrystallization; and plastic strain is much more homogeneous. The flow data within each regime can be satisfactorily fit to thermally activated power laws. In the low-temperature regime n (the stress exponent) = 83 ± 16 and E * (the activation energy for flow) = 220 ± 40 kJ/mol. We believe that these parameters reflect flow dominated by the kinetics of dislocation glide associated with mechanical twinning and (100)〈001〉 slip. In the high-temperature regime, n = 5.3 ± 1.1 and E * = 380 ± 30 kJ/mol. These parameters describe creep by multiple slip accompanied by increased rates of diffusion and recovery.

Journal of Geophysical Research Solid Earth↗
USGS2012

Effects of compression direction on the plasticity and rheology of hydrolytically weakened synthetic quartz crystals at atmospheric pressure

A hydrothermally grown synthetic quartz crystal with 370±60 ppm hydroxyl impurity was cut into right rectangular prisms in eight crystallographic orientations. We compressed the prisms under constant axial force corresponding to a uniaxial stress of 140.0±0.5 MPa, and temperatures of 510° and 750°C. All but one of the samples sustained permanent axial strains of 2–3%. We established the operating slip systems from specimen shape change, slip bands and dislocation etch pits on polished surfaces, crystallographic orientation changes, stress optical features in thin sections, and transmission electron microscopy. The observed creep behavior and plasticity divided the samples into three groups: (1) Crystals compressed at 45° to [0001] and [ ] and those compressed ⊥( ) and ⊥( ) deformed principally by slip parallel to [0001]. Creep rates were relatively high and were not strongly sensitive to test temperature. Dislocation arrays approximately parallel to ( ) are common. Dislocation loops are elongate parallel to [0001], indicating that the edge segments were more mobile than the screw segments. (2) The second group of samples were loaded normal to [0001] in three orientations: ⊥( ), ⊥( ), and at 45° to ( ). These samples deformed primarily by { } 〈a〉 slip with some evidence for secondary slip on the other systems. They were more creep resistant than the first group and displayed a much higher sensitivity of creep rate to test temperature. Dislocation loops are very elongate parallel to [0001], indicating that the screw dislocation segments were much more mobile than the edge segments. (3) A sample compressed parallel to [0001] at 750°C crept at a barely detectable rate (∼10 s) and no optical scale slip features were observed. These results confirm our earlier work on one orientation each from groups 1 and 2, which indicated a strong creep anisotropy for this same crystal. This creep anisotropy parallels a remarkably similar anisotropy in the diffusivity of impurities in quartz, suggesting a causal relationship between impurity diffusion and creep associated with hydrolytic weakening. Appendix Tables A1‐A5 are available with entire article on microfiche. Order from American Geophysical Union, 2000 Florida Avenue, N.W., Washington, DC 20009. Document B84‐004; $2.50. Payment must accompany order.

Journal of Geophysical Research B: Solid Earth↗
USGS2014

Report of the Committee on Runoff, 1949–1950

The Weather Bureau activities in the runoff field during the 1949–1950 year centered largely around its flood and water supply forecasting activities. A new River Forecast Center was inaugurated at Portland, Oregon in January, 1950 to provide service for the Columbia River Basin and adjacent coastal areas. The first custom‐made model of the electronic flood routing machine has been delivered and is being tested to determine its electrical and operating characteristics. A large portion of the Bureau's investigations during the year were aimed at developing to the fullest all possible applications of existing techniques but considerable effort was devoted to the problem of developing new methods for short‐range forecasting of runoff from melting snow. A technique has been developed which appears to satisfy the requirements but it has not yet been adequately tested. Water supply forecasting activities were continued and the number of forecast points increased to about 300. The Cooperative Snow Investigations, with the Corps of Engineers, continued during the year.

Eos, Transactions, American Geophysical Union↗
USGS2010

Earth fissures and localized differential subsidence

Long linear tension cracks associated with declining groundwater levels at four sites in subsiding areas in south-central Arizona, Fremont Valley, California, and Las Vegas Valley, Nevada, occur near points of maximum convex-upward curvature in subsidence profiles oriented perpendicular to the cracks. Profiles are based on repeated precise vertical control surveys of lines of closely spaced bench marks. Association of these fissures with zones of localized differential subsidence indicates that linear earth fissures are caused by horizontal tensile strains probably resulting from localized differential compaction. Horizontal tensile strains across the fissures at the point of maximum convex-upward curvature, ranging from approximately 100 to 700 microstrains (0.01 to 0.07% per year), were indicated based on measurements with a tape or electronic distance meter.

Arizona, California, Idaho, Nevada, Utah↗
USGS2010

Geochemical Modeling of the Madison Aquifer in Parts of Montana, Wyoming, and South Dakota

Stable isotope data for dissolved carbonate, sulfate, and sulfide are combined with water composition data to construct geochemical reaction models along eight flow paths in the Madison aquifer in parts of Wyoming, Montana, and South Dakota. The sulfur isotope data are treated as an isotope dilution problem, whereas the carbon isotope data are treated as Rayleigh distillations. All reaction models reproduce the observed chemical and carbon and sulfur isotopic composition of the final waters and are partially validated by predicting the observed carbon and sulfur isotopic compositions of dolomite and anhydrite from the Madison Limestone. The geochemical reaction models indicate that the dominant groundwater reaction in the Madison aquifer is dedolomitization (calcite precipitation and dolomite dissolution driven by anhydrite dissolution). Sulfate reduction, [Ca 2+ + Mg 2+ ]/Na + cation exchange, and halite dissolution are locally important, particularly in central Montana. The groundwater system is treated as closed to CO 2 gas from external sources such as the soil zone or cross‐formational leakage but open to CO 2 from oxidation of organic matter coupled with sulfate reduction and other redox processes occurring within the aquifer. The computed mineral mass transfers and modeled sulfur isotopic composition of Madison anhydrites are mapped throughout the study area. Carbon 14 groundwater ages, adjusted for the modeled carbon mass transfer, range from modern to about 23,000 years B.P. and indicate flow velocities of 7–87 ft/yr (2.1–26.5 m/yr). Most horizontal hydraulic conductivities calculated from Darcy's Law using the average 14 C flow velocities are within a factor of 5 of those based on digital simulation. The calculated mineral mass transfer and adjusted 14 C groundwater ages permit determination of apparent rates of reaction in the aquifer. The apparent rate of organic matter oxidation is typically 0.12 μmol/L/yr. Sulfate and, to a lesser extent, ferric iron are the predominant electron acceptors. The (kinetic) biochemical fractionation of 34 S between sulfate and hydrogen sulfide is approximately −44‰ at 25°C, with a temperature variation of −0.4‰ per °C. The rates of precipitation of calcite and dissolution of dolomite and anhydrite typically are 0.59, 0.24, and 0.95 μmol/L/yr, respectively. This paper is not subject to U.S. copyright. Published in 1990 by the American Geophysical Union.

Montana, Wyoming, South Dakota↗
USGS1970

Geological significance of coccoliths in fine-grained carbonate bands of postglacial Black Sea sediments

The origin of fine carbonate muds in deep parts of the Black Sea has been explained in various ways, but details of how the carbonate was formed are poorly understood. We have studied samples containing fine carbonate from cores obtained during the cruise of Atlantis II (Woods Hole Oceanographic Institute) to the Black Sea in April and May 1969. Examination of the light-coloured bands and darker bands by scanning electron micrographs and light microscopy shows that Holocene coccoliths are the overwhelmingly dominant constituents in the light bands, whereas Cretaceous and Eocene coccoliths are important components of the carbonate in the darker matrix.

Nature↗