Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water-Resources Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources
USGS2000

Detection of conduit-controlled ground-water flow in northwestern Puerto Rico using aerial photograph interpretation and geophysical methods

The development potential of ground-water resources in the karst limestone of northwestern Puerto Rico, in an area extending from the Río Camuy to Aguadilla, is uncertain as a result of limited knowledge of the location of areas where a high density of cavities (interconnected fractures, conduits, and other dissolution features) might suggest the occurrence of high water yields. The presence in northwestern Puerto Rico of numerous coastal submarine springs, cavernous porosity in some of the wells, and rivers with entrenched and underground paths, indicate that it is probable that water-bearing, subterranean interconnected cavities occur in the area between the Río Camuy and Aguadilla. The number of exploratory wells needed to determine the location of these conduits or zones of enhanced secondary porosity could be substantially reduced if more information were available about the location of these subterranean features, greatly reducing the drilling costs associated with a trial-and-error exploratory process. A 3-year study was conducted by the U.S. Geological Survey, in cooperation with the Puerto Rico Aqueduct and Sewer Authority, to detect the presence of cavities that might suggest the occurrence of conduit-controlled groundwater flow. Aerial photographs, geologic and topographic maps, and field reconnaissance were used to identify such linear terrain features as ridges, entrenched canyons, and fracture traces. Natural potential and gravity geophysical methods were also used. The following sites were selected for the aerial photograph interpretation and geophysical testing: Caimital Bajo uplands and former Ramey Air Force Base in Aguadilla; Quebrada de los Cedros between Aguadilla and Isabela; the University of Puerto Rico Agricultural Experiment Station, Otilio dairy farm, and Pozo Brujo in Isabela; the Monte Encantado area in Moca and Isabela; and the Rio Camuy cave system in Hatillo and Camuy. In general, the degree of success varied with site and the geophysical method used. At some sites such as Pozo Brujo, the University of Puerto Rico Agricultural Experiment Station, and Monte Encantado area, natural potential anomalies strongly suggest the existence of conduits with flowing water. At most sites, however, the results obtained did not clearly reveal the presence of subsurface cavities that might be associated with the occurrence of conduit-controlled ground-water flow. Sites such as the University of Puerto Rico Agricultural Experiment Station, Pozo Brujo, and Quebrada de los Cedros warrant a more detailed analysis, including a test well drilling phase to confirm the presence of suspected high-yield water-bearing zones.

Water-Resources Investigations Report↗
USGS2000

Hydrogeology, hydrologic budget, and water chemistry of the Medina Lake area, Texas

A three-phase study of the Medina Lake area in Texas was done to assess the hydrogeology and hydrology of Medina and Diversion Lakes combined (the lake system) and to determine what fraction of seepage losses from the lake system might enter the regional ground-water-flow system of the Edwards and (or) Trinity aquifers. Phase 1 consisted of revising the geologic framework for the Medina Lake area. Results of field mapping show that the upper member of the Glen Rose Limestone underlies Medina Lake and the intervening stream channel from the outflow of Medina Lake to the midpoint of Diversion Lake, where the Diversion Lake fault intersects Diversion Lake. A thin sequence of strata consisting primarily of the basal nodular and dolomitic members of the Kainer Formation of the Edwards Group, is present in the southern part of the study area. On the southern side of Medina Lake, the contact between the upper member of the Glen Rose Limestone and the basal nodular member is approximately 1,000 feet above mean sea level, and the contact between the basal nodular member and the dolomitic member is approximately 1,050 feet above mean sea level. The most porous and permeable part of the basal nodular member is about 1,045 feet above mean sea level. At these altitudes, Medina Lake is in hydrologic connection with rocks in the Edwards aquifer recharge zone, and Medina Lake appears to lose more water to the ground-water system along this bedding plane contact. Hydrologic budgets calculated during phase 2 for Medina Lake, Diversion Lake, and Medina/Diversion Lakes combined indicate that: (1) losses from Medina and Diversion Lakes can be quantified; (2) a portion of those losses are entering the Edwards aquifer; and (3) losses to the Trinity aquifer in the Medina Lake area are minimal and within the error of the hydrologic budgets. Hydrologic budgets based on streamflow, precipitation, evaporation, and change in lake storage were used to quantify losses (recharge) to the ground-water system from Medina Lake, Diversion Lake, and Medina/Diversion Lakes combined during October 1995–September 1996. Water losses from Medina Lake to the Edwards/Trinity aquifers ranged from -14.0 to 135 acre-feet per day; Diversion Lake ranged from -1.2 to 93.1 acre-feet per day; and Medina/Diversion Lakes combined ranged from 36.1 to 119 acre-feet per day. Monthly average recharge during December 1995–July 1996 was estimated using an alternative method developed during this study (current study method) and compared to monthly average recharge during December 1995–July 1996 estimated using the existing USGS method and the Trans-Texas method. Recharge to the Edwards aquifer estimated using the current study method was about 69 and 73 percent of the recharge estimated using the USGS and Trans-Texas methods, respectively. The USGS and Trans-Texas methods overestimated recharge from Medina Lake compared to the recharge estimated with the current study method when Medina Lake stage was between about 1,027 and 1,032 feet above mean sea level and underestimated recharge from Medina Lake when lake stage was between about 1,036 and 1,045 feet above mean sea level. The USGS and Trans-Texas methods underestimated recharge from Diversion Lake compared to the recharge estimated with the current study method when Diversion Lake stage was greater than 913 feet above mean sea level and overestimated recharge from Diversion Lake when lake stage was less than 913 feet above mean sea level. The water quality of Medina Lake and Medina River and in selected wells and springs in the Edwards and Trinity aquifers was characterized during phase 3 of the study. Environmental isotope analyses and geochemical modeling also were used to determine where water losses from the lake system might be entering the ground-water-flow system. Isotopic ratios of deuterium, oxygen, and strontium were analyzed in selected surface-water, lake-water, and ground-water samples to trace the isotopic “signature” of the lake water as it mixes with the ground water and to determine the fraction of lake water and ground water in selected Edwards aquifer wells. Isotopic data and geochemical modeling were used to show that lake water is moving into the Edwards aquifer in two fault blocks in the eastern Medina storage unit. One fault block is bounded on the north by the Vandenburg School fault and on the south by the Haby Crossing fault, and the second fault block is bounded on the north by the Diversion Lake fault and on the south by the Haby Crossing fault. In selected Edwards aquifer wells located southwest of Medina Lake and west of Diversion Lake, the proportion of lake water ranged from about 10 to 45 percent. Geochemical modeling using NETPATH confirms the degree of mixing between lake water and aquifer water shown by the isotopes.

Texas↗
USGS2000

Vulnerability of ground water to contamination, Edwards Aquifer recharge zone, Bexar County, Texas, 1998

The Edwards aquifer, one of the most productive carbonate-rock aquifers in the Nation, is composed of the Kainer and Person Formations of the Edwards Group plus the overlying Georgetown Formation. Most recharge to the Edwards aquifer results from the percolation of streamflow loss and the infiltration of precipitation through porous parts of the recharge zone. Residential and commercial development is increasing, particularly in Bexar County in south-central Texas, atop the densely fractured and steeply faulted recharge zone. The increasing development has increased the vulnerability of ground water to contamination by spillage or leakage of waste materials, particularly fluids associated with urban runoff and (or) septic-tank leachate. This report describes a method of assessing the vulnerability of ground water to contamination in the Edwards aquifer recharge zone. The method is based on ratings of five natural features of the area: (1) hydraulic properties of outcropping hydrogeologic units; (2) presence or absence of faults; (3) presence or absence of caves and (or) sinkholes; (4) slope of land surface; and (5) permeability of soil. The sum of the ratings for the five natural features was used to develop a map showing the recharge zone's vulnerability to ground-water contamination.

Water-Resources Investigations Report↗
USGS2000

Geology, hydrology, and ground-water quality of the Galena-Platteville aquifer in the vicinity of the Parson's Casket Hardware Superfund Site, Belvidere, Illinois

The geology, hydrology, and distribution of contaminants in the Galena-Platteville aquifer in the vicinity of the Parson's Casket Hardware Superfund site in northeastern Belvidere, Ill., were characterized on the basis of data collected from boreholes using geophysical logging and packer assemblies. Horizontal flow in the Galena-Platteville aquifer is affected by a network of subhorizontal fractures that are concentrated in the weathered part of the bedrock, vugs and fractures present from the bottom of the weathered bedrock to the top of a shaley layer at about 662 ft (feet) above sea level, and through a widespread subhorizontal fracture at about 524 ft. Inclined fractures provide pathways for vertical flow within the Galena-Platteville aquifer. Some fractures and flow pathways appear to be affected by the stratigraphy of the Galena-Platteville deposits. Water-level data indicate the potential for downward flow within the Galena-Platteville aquifer. During periods when pumping in nearby municipal-supply wells is minimal or absent, the direction of flow through the fracture at about 524 ft above sea level is south toward two industrial-supply wells. Flow through the fracture is toward the municipal-supply wells when they are being pumped. Flow in the upper part of the Galena-Platteville aquifer does not appear to be affected by pumping in nearby water-supply wells. Chlorinated ethenes were the volatile organic compounds detected most often and at the highest concentration in the Galena-Platteville aquifer beneath northeastern Belvidere. Volatile organic compounds are migrating primarily to the southeast toward the Kishwaukee River, with components of movement to the north, east, and west. Volatile organic compound and monitored natural attenuation parameter data indicate reductive dechlorination of some chlorinated ethene compounds is occurring under either nitrate or iron-reducing conditions in the unconsolidated deposits and possibly the upper part of the Galena-Platteville aquifer near the center of the plume. Oxidizing conditions appear to be present at least in the upper part of the aquifer beneath most of the study area, and the occurrence of reductive dechlorination in the Galena-Platteville aquifer beneath most of the area of investigation is not clearly indicated.

Illinois↗
USGS2001

Hydrogeology and water quality of five principal aquifers in the Lower Platte South Natural Resources District, eastern Nebraska, 1994

The U.S. Geological Survey, in cooperation with the Lower Platte South Natural Resources District, conducted a hydrogeologic and water-quality reconnaissance study of the five principal aquifers in deposits of Quaternary age in the Natural Resources District. The purpose of the study was to delineate the approximate extent of the aquifers, to estimate volumes of drainable water in three aquifers, to provide information that could be useful in designing future ground-water-quality monitoring, and to determine baseline water-quality conditions in the aquifers, focusing on nitrate concentrations. The approximate lateral boundaries of the Dwight-Valparaiso, Crete-Princeton-Adams, and Waverly aquifers were defined as areas in which the thickness of continuous sand and gravel deposits was less than 40 feet. The three aquifers were determined to contain about 1,340,000; 1,540,000; and 172,000 acre-feet of drainable water, respectively, assuming a specific yield of 0.20. During the summer of 1994, ground-water samples were collected from 46 wells in the five aquifers and analyzed for nitrate and screened for triazine herbicides. Additionally, water samples from 39 of these wells were analyzed for major ions, iron, and manganese, and 35 were analyzed for radon. Water-quality analyses revealed that the water in the five aquifers had specific conductances that ranged from 399 to 2,040 micro-siemens per centimeter and was a calcium-carbonate to calcium-magnesium-sodium carbonate type. The most mineralized water samples were from the Crete-Princeton-Adams aquifer, which contained a median concentration of dissolved solids of 520 milligrams per liter. Concentrations of nitrate in water samples from the aquifers ranged from less than 0.05 to 23 milligrams per liter as nitrogen, and only six water samples exceeded the Maximum Contaminant Level established by the U.S. Environmental Protection Agency of 10 milligrams per liter. The median concentration of radon for water samples from the five aquifers was 300 picocuries per liter, which is the proposed Maximum Contaminant Level. Water samples from the Crete-Princeton-Adams and Waverly aquifers had the largest concentrations of radon among the five aquifers. The Crete-Princeton-Adams aquifer had a median concentration of 440 picocuries per liter, and the Waverly aquifer had a median concentration of 390 picocuries per liter. Herbicides were detected in water from only six wells, which were in four of the five aquifers. Atrazine, metabolites of atrazine, metolachlor, and metribuzin were detected in concentrations generally less than 1.00 microgram per liter.

Water-Resources Investigations Report↗
USGS2000

Results of well-bore flow logging for six water-production wells completed in the Santa Fe Group aquifer system, Albuquerque, New Mexico, 1996-98

Over the last several years, an improved conceptual understanding of the aquifer system in the Albuquerque area, New Mexico, has lead to better knowledge about the location and extent of the aquifer system. This information will aid with the refinement of ground-water simulation and with the location of sites for future water-production wells. With an impeller-type flowmeter, well-bore flow was logged under pumping conditions along the screened interval of the well bore in six City of Albuquerque water-production wells: the Ponderosa 3, Love 6, Volcano Cliffs 1, Gonzales 2, Zamora 2, and Gonzales 3 wells. From each of these six wells, a well-bore flow log was collected that represents the cumulative upward well-bore flow. Evaluation of the well-bore flow log for each well allowed delineation of the more productive zones supplying water to the well along the logged interval. Yields from the more productive zones in the six wells ranged from about 70 to 880 gallons per minute. The lithology of these zones is predominantly gravel and sand with varying amounts of sandy clay.

Water-Resources Investigations Report↗
USGS2000

Concentrations of selected trace elements in fish tissue and streambed sediment in the Clark Fork-Pend Oreille and Spokane River basins, Washington, Idaho, and Montana, 1998

Fish tissue and bed sediment samples were collected from 16 stream sites in the Northern Rockies Intermontane Basins study area in 1998 as part of the U.S. Geological Survey National Water-Quality Assessment Program. Bed sediment samples were analyzed for 45 trace elements, and fish livers and sportfish fillets were analyzed for 22 elements to characterize the occurrence and distribution of these elements in relation to stream characteristics and land use activities. Nine trace elements of environmental concern&mdash;arsenic, cadmium, chromium, copper, lead, mercury, nickel, selenium, and zinc&mdash;were detected in bed sediment, but not all of these elements were detected in fish tissue. Trace-element concentrations were highest in bed sediment samples collected at sites downstream from significant natural mineral deposits and (or) mining activities. Arsenic, cadmium, copper, lead, mercury, and zinc in bed sediment at some sites were elevated relative to national median concentrations, and some concentrations were at levels that can adversely affect aquatic biota. Although trace-element concentrations in bed sediment exceeded various guidelines, no concentrations in sportfish fillets exceeded U.S. Environmental Protection Agency screening values for the protection of human health. Correlations between most trace-element concentrations in bed sediment and fish tissue (liver and fillet) were not significant (r<&plusmn;0.50, p>0.05). Concentrations of arsenic, cadmium, copper, lead, mercury, nickel, selenium, and zinc in bed sediment were significantly correlated (r=0.53 to 0.88, p<0.05) with natural mineral deposits and mining activities, but concentrations in fish tissue generally were not correlated with these measures. Regression analysis between mine density and the sum of trace-element concentrations in bed sediment identified two statistically significant relations (r 2 =0.95 and 0.99, p<0.001) that corresponded to trace-element enrichment categories. These strong relations warrant further study using mine density as an explanatory variable to predict trace-element concentrations in bed sediment.

Idaho, Montana, Washington↗
USGS2001

Diurnal variations in metal concentrations in the Alamosa River and Wightman Fork, southwestern Colorado, 1995-97

A comprehensive sampling network was implemented in the Alamosa River Basin from 1995 to 1997 to address data gaps identified as part of the ecological risk assessment of the Summitville Superfund site. Aluminum, copper, iron, and zinc were identified as the constituents of concern for the risk assessment. Water-quality samples were collected at six sites on the Alamosa River and Wightman Fork by automatic samplers. Several discrete (instantaneous) samples were collected over 24 hours at each site during periods of high diurnal variations in streamflow (May through September). The discrete samples were analyzed individually and duplicate samples were composited to produce a single sample that represented the daily-mean concentration. The diurnal variations in concentration with respect to the theoretical daily-mean concentration (maximum minus minimum divided by daily mean) are presented. Diurnal metal concentrations were highly variable in the Alamosa River and Wightman Fork. The concentration of a metal at a single site could change by several hundred percent during one diurnal cycle. The largest percent change in metal concentrations was observed for aluminum and iron. Zinc concentrations varied the least of the four metals. No discernible or predictable pattern was indicated in the timing of the daily mean, maximum, or minimum concentrations. The percentage of discrete sample concentrations that varied from the daily-mean concentration by thresholds of plus or minus 10, 25, and 50 percent was evaluated. Between 50 and 75 percent of discrete-sample concentrations varied from the daily-mean concentration by more than plus or minus 10 percent. The percentage of samples exceeding given thresholds generally was smaller during the summer period than the snowmelt period. Sampling strategies are critical to accurately define variability in constituent concentration, and conversely, understanding constituent variability is important in determining appropriate sampling strategies. During nonsteady-state periods, considerable errors in estimates of daily-mean concentration are possible if based on one discrete sample. Flow-weighting multiple discrete samples collected over a diurnal cycle provides a better estimate of daily-mean concentrations during nonsteady-state periods.

Colorado↗
USGS2000

Methodology for applying monitored natural attenuation to petroleum hydrocarbon-contaminated ground-water systems with examples from South Carolina

Natural attenuation processes such as dispersion, advection, and biogradation serve to decrease concentrations of disssolved contaminants as they are transported in all ground-water systems. However, the efficiency of these natural attenuation processes and the degree to which they help attain remediation goals, varies considerably from site to site. This report provides a methodology for quantifying various natural attenuation mechanisms. This methodology incorporates information on (1) concentrations of contaminants in space and/or time; (2) ambient reduction/oxidation (redox) conditions; (3) rates and directions of ground-water flow; (4) rates of contaminant biodegradation; and (5) demographic considerations, such as the presence of nearby receptor exposure points or property boundaries. This document outlines the hydrologic, geochemical, and biologic data needed to assess the efficiency of natural attenuation, provides a screening tool for making preliminary assessments, and provides examples of how to determine when natural attenuation can be a useful component of site remediation at leaking underground storage tank sites. At a site in the Piedmont Physiographic Province (Laurens, South Carolina), hydrologic and water-chemistry data indicate that the natural attenuation capacity for benzene is approximately 5 percent per foot of flowpath. As a result, benzene concentrations would decrease from about 28,000 micrograms per liter in ground water at the source area to less than 5 micrograms per liter 200 feet downgradient and prior to discharging to a stream. Because of this rapid attenuation, contaminants do not presently impact the stream downgradient of the site. In contrast, at a site in the coastal Plain Physiographic Province (Charleston, South Carolina), hydrologic and water-chemistry data indicate that, even thought the site has a substantial natural attenuation capacity, it may not be sufficient to fully protect a nearby point of ground-water discharge. These two sites illustrate how the efficiency of natural attenuation processes acting on petroleum hydrocarbons can be systematically evaluated using hydrologic, geochemical, and microbiologic methods. These methods, in turn, can be used to assess the role that the natural attenuation of petroleum hydrocarbons can play in achieving overall site remediation.

South Carolina↗
USGS2000

Probability of detecting atrazine/desethyl-atrazine and elevated concentrations of nitrate plus nitrate as nitrogen in ground water in the Idaho part of the western Snake River Plain

As ground water continues to provide an ever-growing proportion of Idaho?s drinking water, concerns about the quality of that resource are increasing. Pesticides (most commonly, atrazine/desethyl-atrazine, hereafter referred to as atrazine) and nitrite plus nitrate as nitrogen (hereafter referred to as nitrate) have been detected in many aquifers in the State. To provide a sound hydrogeologic basis for atrazine and nitrate management in southern Idaho&mdash;the largest region of land and water use in the State&mdash;the U.S. Geological Survey produced maps showing the probability of detecting these contaminants in ground water in the upper Snake River Basin (published in a 1998 report) and the western Snake River Plain (published in this report). The atrazine probability map for the western Snake River Plain was constructed by overlaying ground-water quality data with hydrogeologic and anthropogenic data in a geographic information system (GIS). A data set was produced in which each well had corresponding information on land use, geology, precipitation, soil characteristics, regional depth to ground water, well depth, water level, and atrazine use. These data were analyzed by logistic regression using a statistical software package. Several preliminary multivariate models were developed and those that best predicted the detection of atrazine were selected. The multivariate models then were entered into a GIS and the probability maps were produced. Land use, precipitation, soil hydrologic group, and well depth were significantly correlated with atrazine detections in the western Snake River Plain. These variables also were important in the 1998 probability study of the upper Snake River Basin. The effectiveness of the probability models for atrazine might be improved if more detailed data were available for atrazine application. A preliminary atrazine probability map for the entire Snake River Plain in Idaho, based on a data set representing that region, also was produced. In areas where this map overlaps the 1998 map of the upper Snake River Basin, the two maps show broadly similar probabilities of detecting atrazine. Logistic regression also was used to develop a preliminary statistical model that predicts the probability of detecting elevated nitrate in the western Snake River Plain. A nitrate probability map was produced from this model. Results showed that elevated nitrate concentrations were correlated with land use, soil organic content, well depth, and water level. Detailed information on nitrate input, specifically fertilizer application, might have improved the effectiveness of this model.

Idaho↗
USGS2000

Documentation of a computer program to simulate lake-aquifer interaction using the MODFLOW ground water flow model and the MOC3D solute-transport model

Heads and flow patterns in surficial aquifers can be strongly influenced by the presence of stationary surface-water bodies (lakes) that are in direct contact, vertically and laterally, with the aquifer. Conversely, lake stages can be significantly affected by the volume of water that seeps through the lakebed that separates the lake from the aquifer. For these reasons, a set of computer subroutines called the Lake Package (LAK3) was developed to represent lake/aquifer interaction in numerical simulations using the U.S. Geological Survey three-dimensional, finite-difference, modular ground-water flow model MODFLOW and the U.S. Geological Survey three-dimensional method-of-characteristics solute-transport model MOC3D. In the Lake Package described in this report, a lake is represented as a volume of space within the model grid which consists of inactive cells extending downward from the upper surface of the grid. Active model grid cells bordering this space, representing the adjacent aquifer, exchange water with the lake at a rate determined by the relative heads and by conductances that are based on grid cell dimensions, hydraulic conductivities of the aquifer material, and user-specified leakance distributions that represent the resistance to flow through the material of the lakebed. Parts of the lake may become "dry" as upper layers of the model are dewatered, with a concomitant reduction in lake surface area, and may subsequently rewet when aquifer heads rise. An empirical approximation has been encoded to simulate the rewetting of a lake that becomes completely dry. The variations of lake stages are determined by independent water budgets computed for each lake in the model grid. This lake budget process makes the package a simulator of the response of lake stage to hydraulic stresses applied to the aquifer. Implementation of a lake water budget requires input of parameters including those representing the rate of lake atmospheric recharge and evaporation, overland runoff, and the rate of any direct withdrawal from, or augmentation of, the lake volume. The lake/aquifer interaction may be simulated in both transient and steady-state flow conditions, and the user may specify that lake stages be computed explicitly, semi-implicitly, or fully-implicitly in transient simulations. The lakes, and all sources of water entering the lakes, may have solute concentrations associated with them for use in solute-transport simulations using MOC3D. The Stream Package of MODFLOW-2000 and MOC3D represents stream connections to lakes, either as inflows or outflows. Because lakes with irregular bathymetry can exist as separate pools of water at lower stages, that coalesce to become a single body of water at higher stages, logic was added to the Lake Package to allow the representation of this process as a user option. If this option is selected, a system of linked pools (sublakes) is identified in each time step and stages are equalized based on current relative sublake surface areas.

Water-Resources Investigations Report↗
USGS2000

Water budget estimates for the 14 hydrographic areas in the middle Humboldt River basin, north-central Nevada

Water budgets were developed for the 14 hydrographic areas in the middle Humboldt River Basin of north-central Nevada. The water budgets include estimates of average annual precipitation, runoff, water yield, ground-water recharge and subsurface flow, and evapotranspiration (ET) determined from recently developed or revised methods. Ground-water pumping is not included in the budget estimates. The estimated budgets represent average annual volumes over a 30-year reference period ( 1961-90) and are compared to water budgets developed more than 30 years ago. Annual inflow to the middle Humboldt River basin is about 5 million acre-feet. An estimated 4.6 million is from precipitation in the 14 hydrographic areas and about 350,000 acre-feet is inflow from the Humboldt River. Annual outflow is about 5.1 million acre-feet, of which ET accounts for 4.8 million acre-feet, and outflow of the Humboldt River is about 300,000 acre-feet. Average annual precipitation in the hydrographic areas for 1961-90 ranged from 105 to 128 percent of that for the 1912-63 period. The annual volume ofET in the 14 areas was 102 to almost 134 percent of that previously estimated, although the percentage of annual precipitation lost to ET is similar. About 15 percent of the annual precipitation in mountain-block areas becomes water yield (either ground water or runoff) as compared to previous estimates of 11 percent. On the basis of mass-balance calculations, ground-water recharge on average is about 145 percent of previous estimates.

Nevada↗
USGS2001

Occurrence, distribution, and loads of selected pesticides in streams in the Lake Erie-Lake St. Clair basin, 1996–98

Thirty pesticides or their degradates were detected in 315 samples collected from 10 streams in the Lake Erie-Lake St. Clair Basin between March 1996 and February 1998 as part of the U.S. Geological Survey’s National Water-Quality Assessment (NAWQA) Program. Atrazine was detected in every sample, and deethylatrazine, metolachlor, and simazine were detected in more than 90 percent of all samples. Atrazine and metolachlor, the most heavily applied pesticides in the Basin, had the highest detected concentrations (85 and 78 micrograms per liter, respectively). No annual average concentrations exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level or health advisory level at any of the surface-water-sampling sites. Seasonally elevated pesticide concentrations, however, have economic consequences on water-treatment facilities required to remove pesticides in water to meet drinking-water standards. From May through July, when most pesticides are transported by runoff into streams, time-weighted average concentrations of atrazine exceeded the Maximum Contaminant Level at five row-crop sites, and time-weighted average concentrations of atrazine and cyanazine frequently exceeded lifetime adult health advisories at these same sites. For some heavily used herbicides such as atrazine, metolachlor, cyanazine, and acetochlor, elevated concentrations persisted 4 to 6 weeks after the initial maximum concentration in the row-crop streams was measured. Land use and physical processes can affect the occurrence and distribution of pesticides. Pesticides were detected at greater frequency and at higher concentrations in samples from streams in basins dominated by row-crop agriculture than in samples from streams in urban or pasture/forest areas. Maximum measured concentrations were higher in 1997 than in 1996 and probably were related to greater precipitation in 1997. Generally, the number of pesticides detected in a basin increased with basin size. Pesticide concentrations showed strong seasonal trends related to the timing and amount of pesticide application. Row-crop herbicides applied in the spring, such as atrazine, had maximum measured concentrations in the spring; pesticides typically applied in late summer and early fall, such as diazinon, had maximum measured concentrations then. The increased number of detections and maximum measured concentrations of acetochlor and the corresponding decrease in the number of detections and concentrations of alachlor reflected changes in the amount of pesticides applied during the sampling period. The percentage of the applied atrazine that was detected in streams, in general, increased when the percentage of impermeable soils within each basin increased. Loads and yields of selected pesticides were calculated. The highest loads calculated were those for atrazine and metolachlor in the Maumee River at Waterville, Ohio, with 47,000 and 44,000 pounds per year, respectively. Of the row-crop basins, either the St. Joseph River near Newville, Ind., or the Auglaize River near Fort Jennings, Ohio, had the highest yields for the herbicides acetochlor, alachlor, atrazine, cyanazine, metolachlor, and simazine. The Cuyahoga River at Cleveland, Ohio, had the highest yields for diazinon and prometon—pesticides that typically are applied heavily in urban areas. The percentage of the applied atrazine that was calculated in the stream was determined for each basin in 1997. The export of atrazine ranged from 0.10 percent at the River Raisin near Manchester, Mich., to 10.6 percent at the St. Joseph River near Newville, Ind.

Indiana, Michigan, New York, Ohio, Pennsylania↗
USGS2000

Arsenic concentration and selected geochemical characteristics for ground water and aquifer materials in southeastern Michigan

Fifty-six private wells, 20 public wells and 38 monitoring wells in ten counties in southeastern Michigan were sampled to determine the concentration of naturally-occurring arsenic and specific geochemical parameters. The majority of ground water samples were analyzed for pH, dissolved oxygen, oxidation/reduction potential, specific conductance, major ions, dissolved and suspended organic carbon, and arsenic. Selected samples were analyzed for minor elements, nutrients, the isotope ratio of carbon and the concentration of tritium. The Mississippian Marshall Sandstone comprises a major aquifer in southeastern Michigan. To compare the lithology of the Marshall Aquifer to water chemistry, two new wells were drilled through the Marshall Sandstone to the underlying Coldwater Shale. Depth-specific bedrock and water samples were collected from these wells. For public and private drinking-water wells, the lowest concentration detected by USGS analysis was <1 microgram per liter and the highest was 220 micrograms per liter. Arsenic concentrations near or exceeding the current USEPA standard of 50 micrograms per liter occurred in ground water from each of the major aquifers in the study area. In the two newly-drilled wells, the lowest concentration detected by the USGS was <1 microgram per liter at about 350 ft below land surface and the highest concentration of 140 micrograms per liter was detected at around 50 ft below land surface. The data from this study may be used to indicate well characteristics and water chemistry factors that are related to arsenic in ground water in southeastern Michigan.

Michigan↗
USGS2000

Simulation of the recharge area for Frederick Springs, Dane County, Wisconsin

The Pheasant Branch watershed in Dane County is expected to undergo development. There are concerns that this development will adversely affect water resources, including Frederick Springs, a large spring complex in the watershed. The spring's recharge area was delineated using a telescopic mesh refinement (TMR) model constructed from an existing regional-scale ground-water flow model, and further refined by adding nearby surface-water features, a refined recharge array based on a surface-water model, and increasing the vertical leakage between the deep aquifers. This TMR model was formally optimized using the parameter estimation code UCODE. The results of optimization demonstrated that the best fit to measured heads and fluxes was obtained by using a horizontal hydraulic conductivity two times that of the original regional model for layer 2 and 80 percent smaller for layer 3. This range of parameter values was formally considered using a stochastic Monte Carlo approach. Two-hundred model runs used uniformly distributed, randomly sampled, horizontal hydraulic conductivity values within the range given by the TMR optimized values and the previously constructed regional model. A probability distribution of particles captured by the spring, or a probabilistic capture zone' was calculated from the realistic Monte Carlo results (136 runs of 200). In addition to portions of the local surface watershed, the capture zone encompassed distant areas in the North Fork of the Pheasant Branch watershed and areas entirely outside of the Pheasant Branch - demonstrating that the ground-watershed and surface watershed do not coincide. Analysis of samples from the springs and a nearby municipal well identified large contrasts in chemistry, even for springs within 50 feet of one another. The differences were stable over time, were present in both ion and isotope analyses, and showed a distinct gradation from high nitrate, high calcium, Ordovician-carbonate dominated water in western spring vents to low nitrate, lower calcium, Cambrian-sandstone influenced water in eastern spring vents. The difference in chemistry was attributed to distinctive bedrock geology as demonstrated by overlaying the 50 percent probability capture zone over a bedrock geology map for the area. This finding gives additional confidence to the capture zone calculated by the ground-water flow model.

Wisconsin↗