SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

USGS2001

Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada

Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern zone of fractures is within Quaternary alluvial sediments, but no bedrock was encountered in trenches and soil pits in this part of the prospective surface facilities site; thus, the direct association of this zone with one or more bedrock faults is uncertain. No displacement of lithologic contacts and soil horizons could be detected in the fractured Quaternary deposits. The results of these investigations imply the absence of any appreciable late Quaternary faulting activity at the prospective surface-facilities site.

Nevada↗

USGS1969

Geology, hydrology, and water quality in the Fresno area, California

The Fresno area comprises about 1.400 square miles lying west of the foothills of the Sierra Nevada and east of the trough of the San Joaquin Valley. The rainfall averages less than 10 inches per year causing agricultural development to depend mainly on surface-water deliveries and ground-water pumpage. Surface-water deliveries and ground-water pumpage, however, vary considerably from year to year. For example, in agricultural year 1958 (April 1, 1958-March 31, 1959) surface-water deliveries were about 1,340,000 acre-feet and agricultural ground-water pumpage was about 1,740,000 acre-feet, but in agricultural year 1960 deliveries were only about 560,000 acre-feet and pumpage was about 2,520,000 acre-feet. Alluvial fans are the dominant geomorphic features in the area. Small alluvial fans have been formed near the foothills by the deposits from the numerous intermittent streams that lie both north and south of the Kings River. Thicker and much more extensive alluvial fans have been formed under most of the area by deposits from the San Joaquin and Kings Rivers. Geologic units in the area consist of consolidated rocks and unconsolidated deposits. In turn, consolidated rocks consist of basement complex of pre-Tertiary age and marine and continental sedimentary rocks of Cretaceous and Tertiary age. Unconsolidated deposits are of both Tertiary and Quaternary age. Most of the geologic units dip gently southwestward approximately paralleling the back slope of the Sierra Nevada. Although some of these geologic units are faulted, especially in the deep subsurface, faulting has not affected the occurrence and movement of fresh ground water. The basement complex crops out along the eastern border of the area and yields only small amounts of water to wells; the marine and continental sedimentary rocks do not crop out in the area and do not yield any water to wells. The unconsolidated deposits are divided into an older series of Tertiary and Quaternary age, and a younger series of Quaternary age. The continental deposits of Tertiary and Quaternary age crop out beneath the extreme southeastern part of the area and yield small amounts of water to wells, and the deposits of Quaternary age crop out over most of the area and yield more than 90 percent of the water pumped from wells. The deposits of Quaternary age in turn are divided into older alluvium, lacustrine and marsh deposits, younger alluvium, flood-basin deposits. and sand dunes. The older alluvium is by far the most important aquifer in the Fresno area. It consists of intercalated lenses of clay, silt, silty and sandy clay, clayey and silty sand, sand, gravel, cobbles, and boulders, and in general it is fine grained near the trough of the valley and beneath the alluvial fans of intermittent streams. In the older alluvium, yields to wells range from less than 20 gpm (gallons per minute) to more than 3,000 gpm. The lacustrine and marsh deposits occur only in the subsurface in the western part of the area. Consisting mostly of silt and clay, they are virtually impermeable and thus restrict the vertical movement of water. These deposits from oldest to youngest are designated the E-clay, the C-clay, and the A-clay. The E-clay is the thickest and most extensive of all the lacustrine and marsh deposits. Because the clays tend to confine ground water in the Fresno area, five water bodies are recognized. These are the unconfined water body, the shallow water body, the confined water body below the A-clay, the confined water body below the C-clay, and the confined water body below the E-clay. The unconfined water body underlies most of the Fresno area. The shallow and confined water bodies underlie parts of the extreme western part of the area. There, heads in successively underlying water bodies are less than those in overlying water bodies, indicating that some ground water moves slowly downward through the clays. From agricultural years 1957 to 1962, outflow in the area exceeded inflow. As a result, for this period, the Fresno area had a net deficit of about 2,890,000 acre-feet. This deficit was made up for mostly by a decline in ground water stored. Water levels in all water bodies have been declining over the years, yet when streamflow and canal deliveries are large they show a general rise. The general movement of ground water in the Fresno area is toward the southwest, although pumping depressions near Fresno and near the western part of the area, cause ground water to move northward, southward, and westward toward them.

California↗

USGS2012

Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.

Idaho↗

USGS2024

Water resources inventory of the Las Cienegas National Conservation Area, southeastern Arizona

The Las Cienegas National Conservation Area was established by the Las Cienegas National Conservation Area Establishment Act of 1999 (Public Law 106–538) and is managed by the Bureau of Land Management. Located in southeastern Arizona, the conservation area contains more than 45,000 acres of rolling grassland, wetlands, and woodlands surrounded by isolated mountain ranges that are part of the Madrean archipelago. This report describes the surface-water and groundwater resources within, and hydrologically connected to, the conservation area. Two primary aquifers have been identified within the Las Cienegas National Conservation Area: a Quaternary alluvial aquifer and a Miocene to Pliocene basin-fill aquifer. The Quaternary alluvial aquifer consists of Quaternary saturated stream alluvium along Cienega Creek and its major tributaries. This aquifer provides the water necessary for base flow in the perennial stream reaches that support aquatic life and for wetland and riparian habitat along the stream courses. Wells and piezometers completed in the Quaternary alluvial aquifer show both seasonal and daily water-level fluctuation patterns, as well as responses to flood flows in Cienega Creek. The basin-fill aquifer, in contrast, consists chiefly of Miocene to Pliocene alluvium within a sedimentary basin that is at least 4,800 feet deep. This aquifer is developed for anthropogenic uses more often than the Quaternary alluvial aquifer is developed. Generally, water levels in wells completed in the basin-fill aquifer have gradually declined a few feet between 2011, when measurements began, and 2022, when this report was written. Most water-chemistry samples available from the basin-fill aquifer had either a sodium-bicarbonate or calcium-bicarbonate water type. Previous research has shown that most recharge to the basin-fill aquifer likely comes from mountain-front and mountain-block recharge. Research further shows that this aquifer likely provides most of the recharge to the Quaternary alluvial aquifer. Because no production wells completed in bedrock exist within the conservation area, little is known about the hydraulic properties of the bedrock therein, but usable quantities of water can likely be produced from places where the bedrock has highly developed joint or fracture systems. During 2006–2021, the average combined length of measured perennial stream reaches within the main part of the Las Cienegas National Conservation Area was 6.35 miles. The average annual base flow of Cienega Creek during 2002–2021, estimated with the Standard Base-Flow Index method using data from a streamgage within the conservation area, was 0.62 cubic feet per second. Monthly mean streamflow measured at this streamgage for the same period ranged from a low of 0.29 cubic feet per second (in June) to a high of 9.8 cubic feet per second (in July). The July average is heavily influenced by a flood that occurred in July 2021; the median July streamflow for 2002–2021 is just 0.84 cubic feet per second. Periods with no daily flow are not uncommon at this gage during late May and June.

Arizona↗

USGS1999

Surface faulting and paleoseismic history of the 1932 Cedar Mountain earthquake area, west-central Nevada, and implications for modern tectonics of the Walker Lane

The 1932 Cedar Mountain earthquake (Ms 7.2) was one of the largest historical events in the Walker Lane region of western Nevada, and it produced a complicated strike-slip rupture pattern on multiple Quaternary faults distributed through three valleys. Primary, right-lateral surface ruptures occurred on north-striking faults in Monte Cristo Valley; small-scale lateral and normal offsets occurred in Stewart Valley; and secondary, normal faulting occurred on north-northeast-striking faults in the Gabbs Valley epicentral region. A reexamination of the surface ruptures provides new displacement and fault-zone data: maximum cumulative offset is estimated to be 2.7 m, and newly recognized faults extend the maximum width and end-to-end length of the rupture zone to 17 and 75 km, respectively. A detailed Quaternary allostratigraphic chronology based on regional alluvialgeomorphic relationships, tephrochronology, and radiocarbon dating provides a framework for interpreting the paleoseismic history of the fault zone. A late Wisconsinan alluvial-fan and piedmont unit containing a 32-36 ka tephra layer is a key stratigraphic datum for paleoseismic measurements. Exploratory trenching and radiocarbon dating of tectonic stratigraphy provide the first estimates for timing of late Quaternary faulting along the Cedar Mountain fault zone. Three trenches display evidence for six faulting events, including that in 1932, during the past 32-36 ka. Radiocarbon dating of organic soils interstratified with tectonically ponded silts establishes best-fit ages of the pre-1932 events at 4, 5,12,15, and 18 ka, each with ??2 ka uncertainties. On the basis of an estimated cumulative net slip of 6-12 m for the six faulting events, minimum and maximum late Quaternary slip rates are 0.2 and 0.7 mm/yr, respectively, and the preferred rate is 0.4-0.5 mm/yr. The average recurrence (interseismic) interval is 3600 yr. The relatively uniform thickness of the ponded deposits suggests that similar-size, characteristic rupture events may characterize late Quaternary slip on the zone. A comparison of event timing with the average late Quaternary recurrence interval indicates that slip has been largely regular (periodic) rather than temporally clustered. To account for the spatial separation of the primary surface faulting in Monte Cristo Valley from the epicenter and for a factor-of-two-to-three disparity between the instrumentally and geologically determined seismic moments associated with the earthquake, we hypothesize two alternative tectonic models containing undetected subevents. Either model would adequately account for the observed faulting on the basis of wrench-fault kinematics that may be associated with the Walker Lane. The 1932 Cedar Mountain earthquake is considered an important modern analogue for seismotectonic modeling and estimating seismic hazard in the Walker Lane region. In contrast to most other historical events in the Basin and Range province, the 1932 event did not occur along a major range-bounding fault, and no single, throughgoing basement structure can account for the observed rupture pattern. The 1932 faulting supports the concept that major earthquakes in the Basin and Range province can exhibit complicated distributive rupture patterns and that slip rate may not be a reliable criterion for modeling seismic hazard.

Geological Society of America Bulletin↗

USGS2004

Holocene to Pliocene tectonic evolution of the region offshore of the Los Angeles urban corridor, southern California

Quaternary tectonism in the coastal belt of the Los Angeles urban corridor is diverse. In this paper we report the results of studies of multibeam bathymetry and a network of seismic reflection profiles that have been aimed at deciphering the diverse tectonism and at evaluating the relevance of published explanations of the region's tectonic history. Rapid uplift, subsidence in basins, folds and thrusts, extensional faulting, and strike-slip faulting have all been active at one place or another throughout the Quaternary Period. The tectonic strain is reflected in the modern physiography at all scales. Los Angeles (LA) Basin has filled from a deep submarine basin to its present condition with sediment impounded behind a large sill formed behind uplifts near the present shoreline. Newport trough to the south-southeast of LA Basin also accumulated a large volume of sediment, but remained at midbathyal depths throughout the Period. There is little or no evidence of Quaternary extensional tectonism in either basin although as much as 6 km of subsidence, which mainly occurred by sagging, has been recorded in places since the middle Miocene. The uplifts include folded and thrust faulted terranes in the Palos Verdes Hills and the shelves of Santa Monica and San Pedro Bays. The uplifted areas have been shortened in a southwest-northeast direction by 10% or slightly more, and some folds are reflected in the bathymetry. Two large adjacent midbathyal basins, Santa Monica and San Pedro, show strong evidence of subsidence and slight west-northwest extension (10%) during the same time folding was taking place in the uplifts. The tectonic boundaries between uplifts and basins are folded, normal faulted, reverse-faulted, and strike-slip faulted depending on location. The rapid Quaternary uplift and subsidence, along with the filling of LA Basin, have produced a reversal in the regional physiography. In the early Pliocene, LA Basin was a submarine deep, Palos Verdes and the shelves comprised a northeast basin slope, and the present offshore basins and Catalina Island formed an emergent or shallowly submerged shelf. Since extensional, compressional, and lateral strains are all locally in evidence, simple notions that this part of southern California underwent a change from Miocene transtension to Quaternary transpression fail to explain our observations.

Tectonics↗

USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault, southeastern Alaska

The Queen Charlotte Fault defines the Pacific–North America transform plate boundary in western Canada and southeastern Alaska for c. 900 km. The entire length of the fault is submerged along a continental margin dominated by Quaternary glacial processes, yet the geomorphology along the margin has never been systematically examined due to the absence of high-resolution seafloor mapping data. Hence the geological processes that influence the distribution, character and timing of mass transport events and their associated hazards remain poorly understood. Here we develop a classification of the first-order shape of the continental shelf, slope and rise to examine potential relationships between form and process dominance. We found that the margin can be split into six geomorphic groups that vary smoothly from north to south between two basic end-members. The northernmost group (west of Chichagof Island, Alaska) is characterized by concave-upwards slope profiles, gentle slope gradients (<6°) and relatively low along-strike variance, all features characteristic of sediment-dominated siliciclastic margins. Dendritic submarine canyon/channel networks and retrogressive failure complexes along relatively gentle slope gradients are observed throughout the region, suggesting that high rates of Quaternary sediment delivery and accumulation played a fundamental part in mass transport processes. Individual failures range in area from 0.02 to 70 km2 and display scarp heights between 10 and 250 m. Transpression along the Queen Charlotte Fault increases southwards and the slope physiography is thus progressively more influenced by regional-scale tectonic deformation. The southernmost group (west of Haida Gwaii, British Columbia) defines the tectonically dominated end-member: the continental slope is characterized by steep gradients (>20°) along the flanks of broad, margin-parallel ridges and valleys. Mass transport features in the tectonically dominated areas are mostly observed along steep escarpments and the larger slides (up to 10 km2) appear to be failures of consolidated material along the flanks of tectonic features. Overall, these observations highlight the role of first-order margin physiography on the distribution and type of submarine landslides expected to occur in particular morphological settings. The sediment-dominated end-member allows for the accumulation of under-consolidated Quaternary sediments and shows larger, more frequent slides; the rugged physiography of the tectonically dominated end-member leads to sediment bypass and the collapse of uplifted tectonic features. The maximum and average dimensions of slides are an order of magnitude smaller than those of slides observed along other (passive) glaciated margins. We propose that the general patterns observed in slide distribution are caused by the interplay between tectonic activity (long- and short-term) and sediment delivery. The recurrence (<100 years) of M > 7 earthquakes along the Queen Charlotte Fault may generate small, but frequent, failures of under-consolidated Quaternary sediments within the sediment-dominated regions. By contrast, the tectonically dominated regions are characterized by the bypass of Quaternary sediments to the continental rise and the less frequent collapse of steep, uplifted and consolidated sediments.

Alaska↗

USGS1988

Map of fault scarps formed in unconsolidated sediments, Tooele 1 degree by 2 degrees quadrangle, northwestern Utah

This report is one of a series of studies of western Utah (Anderson and Bucknam, 1979; Bucknam and Anderson, 1979b), eastern Nevada (Barnhard, 1985), and central Nevada (Wallace, 1979) that shows the distribution, relative age, and amount and extent of surface rupture on Quaternary fault scarps. Previous paleoseismicity studies in the Tooele 1°x2° quadrangle include reports by Gilbert (1928), Bucknam (1977), Anderson and Miller (1980), Bucknam and others (1980), and Everitt and Kaliser (1980). Geologic and geophysical data pertinent to paleoseismicity of the Tooele 1°x2° quadrangle can be found in reports by Mikulich and Smith (1974), Cook and others (1980), Smith and Bruhn (1984), and Arabasz and others (1987). The present study is a continuation of mapping fault scarps in 1°x2° quadrangles in the Basin and Range province; the purpose is to determine the youngest surface-faulting age and distribution of fault scarps for earthquake-hazards analysis. The accompanying map shows 10 areas containing late Quaternary fault scarps formed on unconsolidated sediments in the Tooele 1°x2° quadrangle, northwestern Utah. The faulted sediments include sandy, pebbly, to bouldery colluvium, alluvium, and lacustrine deposits. They are inferred to have been deposited in Quaternary time during the latest phase of basin-filling sedimentation. Because the map shows only scarps on unconsolidated sediments, it does not show all faults that could produce earthquakes. A comprehensive map of all Quaternary faults would also include those in bedrock and at the contact of bedrock and alluvium, as well as Quaternary faults that appear only as lineaments in surficial deposits. Initial study involved photointerpretation of high-quality 1:60,000-scale black and white aerial photographs of the map area; offsets as small as 1 m could be detected from these photos if the faults cut planar surfaces of considerable extent. A map of suspected fault scarps, identified from the photointerpretation, was compiled at a scale of 1:250,000 and served as a guide for subsequent field studies in conjunction with a similar map from Bucknam (1977). We have chosen not to connect discontinuous segments of aligned fault scarps unless there is compelling evidence of continuous surface rupture. Field studies consisted of (1) confirming scarps as fault related and deleting from the preliminary map those features that were not fault related or that had no surface offset (lineaments), (2) searching for stratigraphic indicators of amount and age of offset, and (3) measuring surface profiles according to procedures described in Bucknam and Anderson (1979a). We profiled selected fault scarps where they were sufficiently continuous and unmodified by fluvial deposition or erosion. In the early morning or late afternoon when the sun was at 1ow angles, additional field searches were made for scarps resulting from ground ruptures that had not been identified during the photo interpretation phase of the study. No additional scarps were found. Techniques that yield the relative age of fault scarps can be used as a guide to the frequency and location of relatively large earthquakes. For large regions, geologically determined rates of seismic activity in the Basin and Range province are generally in good agreement with rates determined from historic seismicity (Bucknam and Algermissen, 1984). Fault-scarp studies such as this have been used as a guide in locating boundaries of seismic source zones used in probabilistic earthquake hazard estimates of the Basin and Range province (Thenhaus and Wentworth, 1982; Bucknam and Thenhaus, 1983). We will first discuss the geologic setting of the map area and attributes of fault-scarp morphology, and then discuss the individual fault zones.

Utah↗

USGS2009

Evaluation of hazardous faults in the intermountain west region: Summary and recommendations of a workshop

The U.S. Geological Survey’s (USGS) Earthquake Hazards Program (EHP) has the responsibility to provide nationwide information and knowledge about earthquakes and earthquake hazards as a step to mitigating earthquake-related losses. As part of this mission, USGS geologists and geophysicists continue to study faults and structures that have the potential to generate large and damaging earthquakes. In addition, the EHP, through its External Grants Program (hereinafter called Program), supports similar studies by scientists employed by state agencies, academic institutions, and independent employers. For the purposes of earthquake hazard investigations, the Nation is geographically subdivided into tectonic regions. One such region is the Intermountain West (IMW), which here is broadly defined as starting at the eastern margin of the Rocky Mountains in New Mexico, Colorado, Wyoming, and Montana and extending westward to the east side of the Sierra Nevada mountains in eastern California and into the Basin and Range-High Plateaus of eastern Oregon and Washington. The IMW contains thousands of faults that have moved in Cenozoic time, hundreds of which have evidence of Quaternary movement, and thus are considered to be potential seismic sources. Ideally, each Quaternary fault should be studied in detail to evaluate its rate of activity in order to model the hazard it poses. The study of a single fault requires a major commitment of time and resources, and given the large number of IMW faults that ideally should be studied, it is impractical to expect that all IMW Quaternary faults can be fully evaluated in detail. A more realistic approach is to prioritize a list of IMW structures that potentially pose a significant hazard and to focus future studies on those structures. Accordingly, in June 2008, a two-day workshop was convened at the USGS offices in Golden, Colorado, to seek information from representatives of selected State Geological Surveys in the IMW and with knowledgeable regional experts to identify the important structures for future studies. Such a priority list allows Program managers to guide the limited resources toward studies of features that are deemed to potentially pose the most serious hazards in the IMW. It also provides the scientific community with a list of structures to investigate because they are deemed to pose a substantial hazard to population centers or critical structures. The IMW encompasses all or large parts of 12 states, including Arizona, New Mexico, extreme west Texas, Colorado, Utah, Nevada, eastern California, eastern Oregon, eastern Washington, Idaho, western Wyoming, and western Montana. In Utah, and more recently in Nevada, geoscientists have taken steps to evaluate geologic data related to well-studied faults and to develop a statewide priority list of hazardous structures. In contrast to Utah and Nevada, the other IMW states contain substantially fewer Quaternary faults, so there have not been any previous efforts to develop similar priority lists. This workshop was organized to address this matter and create a more balanced perspective of priorities throughout the entire IMW region. Because working groups and workshops had already been convened to specifically deal with Quaternary fault priorities in Utah and Nevada, this workshop specifically emphasized structures outside of these two states.

Arizona, California, Colorado, Idaho, Montana, Nev↗

USGS1995

Water resources of Teton County, Wyoming, exclusive of Yellowstone National Park

Surface- and ground-water data were collected and analyzed to describe the water resources of that part of Teton County, Wyoming located south of Yellowstone National Park. Wells and springs inventoried in the Teton County study area most commonly were completed in or issued from Quaternary unconsolidated deposits and Tertiary, Mesozoic, and Paleozoic rocks. The largest measured, reported, or estimated discharges were from Quaternary uncon- solidated deposits (3,000 gallons per minute), the Bacon Ridge Sandstone of Cretaceous age (800 gallons per minute), and the Madison Limestone of Mississippian age (800 gallons per minute). Dissolved-solids concentrations in water samples from Quaternary unconsolidated deposits and Tertiary, Mesozoic, and Paleozoic rocks ranged from 80 to 1,060 milligrams per liter. A time-domain electromagnetic survey of Jackson Hole indicated that the depth of Quaternary unconsolidated deposits ranged from about 380 feet in the northern part of Antelope Flats to about 2,400 feet near the Potholes area in Grand Teton National Park. A streamflow gain-and-loss study indicated that the ground-water discharge to the Snake River between gaging stations near Moran and south of the Flat Creek confluence, near Jackson, was 395 cubic feet per second. Water level contours generated from 137 water-level measurements and 118 stream altitudes indicated that water in Quaternary unconsolidated deposits flows southwest in the general direction of the Snake River.

Water-Resources Investigations Report↗

USGS2016

Differential uplift and incision of the Yakima River terraces, central Washington State

The fault-related Yakima folds deform Miocene basalts and younger deposits of the Columbia Plateau in central Washington State. Geodesy implies ~2 mm/yr of NNE directed shortening across the folds, but until now the distribution and rates of Quaternary deformation among individual structures has been unclear. South of Ellensburg, Washington, the Yakima River cuts a ~600 m deep canyon across several Yakima folds, preserving gravel-mantled strath terraces that record progressive bedrock incision and related rock uplift. Here we integrate cosmogenic isochron burial dating of the strath terrace gravels with lidar analysis and field mapping to quantify rates of Quaternary differential incision and rock uplift across two folds transected by the Yakima River: Manastash and Umtanum Ridge. Isochron burial ages from in situ produced 26 Al and 10 Be at seven sites across the folds date episodes of strath terrace formation over the past ~2.9 Ma. Average bedrock incision rates across the Manastash (~88 m/Myr) and Umtanum Ridge (~46 m/Myr) anticlines are roughly 4 to 8 times higher than rates in the intervening syncline (~14 m/Myr) and outside the canyon (~10 m/Myr). These contrasting rates demonstrate differential bedrock incision driven by ongoing Quaternary rock uplift across the folds at rates corresponding to ~0.13 and ~0.06 mm/yr shortening across postulated master faults dipping 30 ± 10°S beneath the Manastash and Umtanum Ridge anticlines, respectively. The reported Quaternary shortening across the anticlines accounts for ~10% of the ~2 mm/yr geodetic budget, suggesting that other Yakima structures actively accommodate the remaining contemporary deformation.

Washington↗

USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗

USGS2007

Geology of the Yucca Mountain site area, southwestern Nevada

Yucca Mountain in southwestern Nevada is a prominent, irregularly shaped upland formed by a thick apron of Miocene pyroclastic-flow and fallout tephra deposits, with minor lava flows, that was segmented by through-going, large-displacement normal faults into a series of north-trending, eastwardly tilted structural blocks. The principal volcanic-rock units are the Tiva Canyon and Topopah Spring Tuffs of the Paintbrush Group, which consist of volumetrically large eruptive sequences derived from compositionally distinct magma bodies in the nearby southwestern Nevada volcanic field, and are classic examples of a magmatic zonation characterized by an upper crystal-rich (>10% crystal fragments) member, a more voluminous lower crystal-poor (<5% crystal fragments) member, and an intervening thin transition zone. Rocks within the crystal-poor member of the Topopah Spring Tuff, lying some 280 m below the crest of Yucca Mountain, constitute the proposed host rock to be excavated for the storage of high-level radioactive wastes. Separation of the tuffaceous rock formations into subunits that allow for detailed mapping and structural interpretations is based on macroscopic features, most importantly the relative abundance of lithophysae and the degree of welding. The latter feature, varying from nonwelded through partly and moderately welded to densely welded, exerts a strong control on matrix porosities and other rock properties that provide essential criteria for distinguishing hydrogeologic and thermal mechanical units, which are of major interest in evaluating the suitability of Yucca Mountain to host a safe and permanent geologic repository for waste storage. A thick and varied sequence of surficial deposits mantle large parts of the Yucca Mountain site area. Mapping of these deposits and associated soils in exposures and in the walls of trenches excavated across buried faults provides evidence for multiple surface-rupturing events along all of the major faults during Pleistocene and Holocene times; these paleoseismic studies form the basis for evaluating the potential for future earthquakes and fault displacements. Thermoluminescence and U-series analyses were used to date the surficial materials involved in the Quaternary faulting events. The rate of erosional downcutting of bedrock on the ridge crests and hillslopes of Yucca Mountain, being of particular concern with respect to the potential for breaching of the proposed underground storage facility, was studied by using rock varnish cation-ratio and 10 Be and 36 Cl cosmogenic dating methods to determine the length of time bedrock outcrops and hillslope boulder deposits were exposed to cosmic rays, which then served as a basis for calculating long-term erosion rates. The results indicate rates ranging from 0.04 to 0.27 cm/k.y., which represent the maximum downcutting along the summit of Yucca Mountain under all climatic conditions that existed there during most of Quaternary time. Associated studies include the stratigraphy of surficial deposits in Fortymile Wash, the major drainage course in the area, which record a complex history of four to five cut-and-fill cycles within the channel during middle to late Quaternary time. The last 2-4 m of incision probably occurred during the last pluvial climatic period, 22-18 ka, followed by aggradation to the present time. Major faults at Yucca Mountain-from east to west, the Paintbrush Canyon, Bow Ridge, Stagecoach Road, Solitario Canyon, Fatigue Wash, Windy Wash, and Northern and Southern Crater Flat Faults-trend predominantly north, are spaced 1-5 km apart, have bedrock displacements ranging from 125 m to as much as 500 m, and exhibit Quaternary movements of several centimeters to a few meters. Displacements are predominantly down to the west, and bedrock/alluvium contacts commonly are marked by fault-line scarps. The predominant northerly fault trend changes to a more northeasterly trend in adjacent areas south

Nevada↗

USGS2016

Geology and geomorphology of the Carolina Sandhills, Chesterfield County, South Carolina

This two-day field trip focuses on the geology and geomorphology of the Carolina Sandhills in Chesterfield County, South Carolina. This area is located in the updip portion of the U.S. Atlantic Coastal Plain province, supports an ecosystem of longleaf pine ( Pinus palustris ) and wiregrass ( Aristida stricta ), and contains three major geologic map units: (1) An ~60–120-m-thick unit of weakly consolidated sand, sandstone, mud, and gravel is mapped as the Upper Cretaceous Middendorf Formation and is interpreted as a fluvial deposit. This unit is capped by an unconformity, and displays reticulate mottling, plinthite, and other paleosol features at the unconformity. The Middendorf Formation is the largest aquifer in South Carolina. (2) A 0.3–10-m-thick unit of unconsolidated sand is mapped as the Quaternary Pinehurst Formation and is interpreted as deposits of eolian sand sheets and dunes derived via remobilization of sand from the underlying Cretaceous strata. This unit displays argillic horizons and abundant evidence of bioturbation by vegetation. (3) A <3-m-thick unit of sand, pebbly sand, sandy mud, and mud is mapped as Quaternary terrace deposits adjacent to modern drainages. In addition to the geologic units listed above, a prominent geomorphologic feature in the study area is a north-trending escarpment (incised by headwater streams) that forms a markedly asymmetric drainage divide. This drainage divide, as well as the Quaternary terraces deposits, are interpreted as evidence of landscape disequilibrium (possibly geomorphic responses to Quaternary climate changes).

South Carolina↗

USGS2021

Geologic framework of Mount Diablo, California

The basic stratigraphic and structural framework of Mount Diablo is described using a revised geologic map, gravity data, and aeromagnetic data. The mountain is made up of two distinct stratigraphic assemblages representing different depocenters that were juxtaposed by ~20 km of late Pliocene and Quaternary right-lateral offset on the Greenville-Diablo-Concord fault. Both assemblages are composed of Cretaceous and Cenozoic strata overlying a compound basement made up of the Franciscan and Great Valley complexes. The rocks are folded and faulted by late Neogene and Quaternary compressional structures related to both regional plate-boundary–normal compression and a restraining step in the strike-slip fault system. The core of the mountain is made up of uplifted basement rocks. Late Neogene and Quaternary deformation is overprinted on Paleogene extensional deformation that is evidenced at Mount Diablo by significant attenuation in the basement rocks and by an uptilted stepped graben structure on the northeast flank. Retrodeformation of the northeast flank suggests that late Early to early Late Cretaceous strata may have been deposited against and across a steeply west-dipping basement escarpment. The location of the mountain today was a depocenter through the Late Cretaceous and Paleogene and received shallow-marine deposits periodically into the late Miocene. Uplift of the mountain itself happened mostly in the Quaternary.

California↗

USGS2014

40Ar/39Ar Geochronology, Isotope Geochemistry (Sr, Nd, Pb), and petrology of alkaline lavas near Yampa, Colorado: migration of alkaline volcanism and evolution of the northern Rio Grande rift

Volcanic rocks near Yampa, Colorado (USA), represent one of several small late Miocene to Quaternary alkaline volcanic fields along the northeast margin of the Colorado Plateau. Basanite, trachybasalt, and basalt collected from six sites within the Yampa volcanic field were investigated to assess correlations with late Cenozoic extension and Rio Grande rifting. In this paper we report major and trace element rock and mineral compositions and Ar, Sr, Nd, and Pb isotope data for these volcanic rocks. High-precision 40Ar/39Ar geochronology indicates westward migration of volcanism within the Yampa volcanic field between 6 and 4.5 Ma, and the Sr, Nd, and Pb isotope values are consistent with a primary source in the Proterozoic subcontinental lithospheric mantle. Relict olivine phenocrysts have Mg- and Ni-rich cores, whereas unmelted clinopyroxene cores are Na and Si enriched with finely banded Ca-, Mg-, Al-, and Ti-enriched rims, thus tracing their crystallization history from a lithospheric mantle source region to one in contact with melt prior to eruption. A regional synthesis of Neogene and younger volcanism within the Rio Grande rift corridor, from northern New Mexico to southern Wyoming, supports a systematic overall southwest migration of alkaline volcanism. We interpret this Neogene to Quaternary migration of volcanism toward the northeast margin of the Colorado Plateau to record passage of melt through subvertical zones within the lithosphere weakened by late Cenozoic extension. If the locus of Quaternary alkaline magmatism defines the current location of the Rio Grande rift, it includes the Leucite Hills, Wyoming. We suggest that alkaline volcanism in the incipient northern Rio Grande rift, north of Leadville, Colorado, represents melting of the subcontinental lithospheric mantle in response to transient infiltration of asthenospheric mantle into deep, subvertical zones of dilational crustal weakness developed during late Cenozoic extension that have been migrating toward, and subparallel to, the northeast margin of the Colorado Plateau since the middle Miocene. Quaternary volcanism within this northern Rio Grande rift corridor is evidence that the rift is continuing to evolve.

Colorado↗

USGS2003

Field guide to hydrothermal alteration in the White River altered area and in the Osceola Mudflow, Washington

The Cenozoic Cascades arcs of southwestern Washington are the product of long-lived, but discontinuous, magmatism beginning in the Eocene and continuing to the present (for example, Christiansen and Yeats, 1992). This magmatism is the result of subduction of oceanic crust beneath the North American continent. The magmatic rocks are divided into two subparallel, north-trending continental-margin arcs, the Eocene to Pliocene Western Cascades, and the Quaternary High Cascades, which overlies, and is east of, the Western Cascades. Both arcs are calc-alkaline and are characterized by voluminous mafic lava flows (mostly basalt to basaltic andesite compositions) and scattered large stratovolcanoes of mafic andesite to dacite compositions. Silicic volcanism is relatively uncommon. Quartz diorite to granite plutons are exposed in more deeply eroded parts of the Western Cascades Arc (for example, Mount Rainier area and just north of Mt. St. Helens). Hydrothermal alteration is widespread in both Tertiary and Quaternary igneous rocks of the Cascades arcs. Most alteration in the Tertiary Western Cascades Arc resulted from hydrothermal systems associated with small plutons, some of which formed porphyry copper and related deposits, including copper-rich breccia pipes, polymetallic veins, and epithermal gold-silver deposits. Hydrothermal alteration also is present on many Quaternary stratovolcanoes of the High Cascades Arc. On some High Cascades volcanoes, this alteration resulted in severely weakened volcanic edifices that were susceptible to failure and catastrophic landslides. Most notable is the sector collapse of the northeast side of Mount Rainier that occurred about 5,600 yr. B.P. This collapse resulted in formation of the clay-rich Osceola Mudflow that traveled 120 km down valley from Mount Rainier to Puget Sound covering more than 200 km2. This field trip examines several styles and features of hydrothermal alteration related to Cenozoic magmatism in the Cascades arcs. The morning of the trip will examine the White River altered area, which includes high-level alteration related to a large, early Miocene magmatic-hydrothermal system exposed about 10 km east of Enumclaw, Washington. Here, vuggy silica alteration is being quarried for silica and advanced argillic alteration has been prospected for alunite. Clay-filled fractures and sulfide-rich, fine-grained sedimentary rocks of hydrothermal origin locally are enriched in precious metals. Many hydrothermal features common in high-sulfidation gold-silver deposits and in advanced argillic alteration zones overlying porphyry copper deposits (for example, Gustafson and Hunt, 1975; Hedenquist and others, 2000; Sillitoe, 2000) are exposed, although no economic base or precious metal mineralized rock has been discovered to date. The afternoon will be spent examining two exposures of the Osceola Mudflow along the White River. The Osceola Mudflow contains abundant clasts of altered Quaternary rocks from Mount Rainier that show various types of hydrothermal alteration and hydrothermal features. The mudflow matrix contains abundant hydrothermal clay minerals that added cohesiveness to the debris flow and helped allow it to travel much farther down valley than other, noncohesive debris flows from Mount Rainier (Crandell, 1971; Vallance and Scott, 1997). The White River altered area is the subject of ongoing studies by geoscientists from Weyerhaeuser Company and the U.S. Geological Survey (USGS). The generalized descriptions of the geology, geophysics, alteration, and mineralization presented here represent the preliminary results of this study (Ashley and others, 2003). Additional field, geochemical, geochronologic, and geophysical studies are underway. The Osceola Mudflow and other Holocene debris flows from Mount Rainier also are the subject of ongoing studies by the USGS (for example, Breit and others, 2003; John and others, 2003; Plumlee and others, 2003, Sisson and others, 2003; Vallance and others, 2003). Studies of hydrothermal alteration in the Osceola Mudflow are being used to better understand fossil hydrothermal systems on Mount Rainier and potential hazards associated with this alteration.

Washington↗

USGS1990

Geologic map of Harrat Hutaymah, with petrologic classification and distribution of ultramafic inclusions, Saudi Arabia

This map shows detailed geology of the Quaternary and Tertiary volcanic deposits that comprise Harrat Hutaymah and an updated and generalized compilation of the underlying Proterozoic and Paleozoic basement rocks. Quaternary alluvial cover and details of basement geology (that is, faults, dikes, and other features) are not shown. Volcanic unit descriptions and contact relations are based upon field investigation by the author and on compilation and revision of mapping Kellogg (1984; northern half of area) and Pallister (1984; southern half of area). A single K-Ar date of 1.80 ± 0.05 Ma for an alkali olivine basalt flow transected by the Al Hutaymah tuff ring (Pallister, 1984) provides the basis for an estimated late Tertiary to Quaternary age range for all harrat volcanic units other than unit Qtr (tuff reworked during Quaternary age time). Contact relations and unit descriptions for the basement rocks were compiled from Pallister (1984), Kellogg (1984 and 1985), DuBray (1984), Johnson and Williams (1984), Vaslet and others (1987), Cole and Hedge (1986), and Richter and others (1984). All rock unit names in this report are informal and capitalization follows Saudi Arabian stratigraphic nomenclature (Fitch, 1980). Geographic information was compiled from Pallister (1984), Kellogg (1984), and Fuller (in Johnson and Williams, 1984) and from field investigation by the author in 1986. The pie diagrams on the map show the distribution and petrology of ultramafic xenoliths of Harrat Hutaymah. The pie diagrams are explained by a detailed classification of ultramafic xenoliths that is introduced in this report.

Harrat Hutaymah↗