Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

Geology of the Williston basin, North Dakota, Montana, and South Dakota, with reference to subsurface disposal of radioactive wastes

The southern Williston basin, which underlies about 110,000 square miles #n North Dakota, South Dakota, and eastern Montana, is part of a large structural and sedimentary basin. Its surface is a flat to gently rolling plain, standing about 1,500 to 3,500 feet above sea level and locally studded by a few high buttes. The sedimentary sequence that fills the basin has a maximum thickness of about 16,700 feet and rests on Precambrian metamorphic rocks at depths of 500 to 13,900 feet below sea level. It contains rocks of every geologic system, from Cambrian to Quaternary. Rocks of Middle Cambrian through Middle Ordovician age are largely shale and sandstone, as much as 1,200 feet thick; rocks of Late Ordovician through Pennsylvanian age are largely limestone and dolomite, as much as 7,500 feet thick; and rocks of Permian through Tertiary age are predominantly shale and siltstone, as much as 8,000 feet thick. Pleistocene glacial drift mantles the northern and eastern parts of the area. Rocks of the Williston basin are gently folded and regional dips are 1? or less from the margins to the basin center. Dips on the flanks of the major anticlinal folds, the Nesson and cedar Creek anticlines and the Poplar and Bowdoin domes, generally are about 1? to 3? except on the steep west limb of the Cedar Creek anticline. The basin was shaped by Laramide orogeny during latest Cretaceous and early Tertiary time. Most of the present structural features, however, were initiated during the Precambrian and reactivated by several subsequent orogenies, of which the latest was the Laramide. The most important mineral resource of the area is oil, which is produced predominantly from the Paleozoic carbonate sequence and largely on three of the major anticlinal folds, and lignite, which is present near the surface in Paleocene rocks. The subsurface disposal of radioactive wastes at some places in the Williston basin appears to be geographically and geologically feasible. Many sites, at which large quantities of wastes might be injected with minimal danger of contamination of fresh-water aquifers and-oil-producing strata, are available.. The strata and types of reservoirs that deserve primary consideration for waste disposal are the Winnipeg Formation of Middle Ordovician age as a deep salaquifer, the Permian to Jurassic salt beds as moderately deep-units in which solution cavities might be created for storage, the thick Upper Cretaceous shale beds as shallow hydraulically fractured shale reservoirs, and the Newcastle Sandstone of Early Cretaceous age as a shallow shale-enclosed sandstone reservoir.

Open-File Report↗

California State Waters Map Series — Drakes Bay and vicinity, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Drakes Bay and Vicinity map area is located in northern California, about 30 km north of San Francisco and about 65 km south of Fort Ross. The map area is in the northern part of the Gulf of the Farallones National Marine Sanctuary, and it includes all or parts of four California Marine Protected Areas. The largely undeveloped onshore part of the map area, which occupies much of the southern and southeastern parts of the Point Reyes peninsula, is used primarily for grazing, as well as recreation, as it is home to the Point Reyes National Seashore. The triangular Point Reyes peninsula, which lies completely west of the San Andreas Fault Zone, is bounded by the steep terrain of Inverness Ridge along its northeastern margin, Tomales Point at its northernmost tip, Point Reyes at its southwesternmost point, and Bolinas at its southern end. The landscape in between includes (from southeast to northwest) the sandy beaches along Drakes Bay, the estuaries of Drakes Estero and Estero de Limantour, and the long, windswept Point Reyes Beach, which is backed by an extensive dune field. The seafloor in the map area generally extends from the shoreline to water depths of about 40 to 50 m, except for the area south of the Point Reyes headland where water depths reach 60 to 70 m. This bathymetric gradient south and west of the Point Reyes headland is related to north-side-up motion along the Point Reyes Fault Zone. Except for the bathymetric gradient across the Point Reyes Fault Zone, the bedrock platform in the nearshore and inner shelf areas (50 to 60 m depth) is relatively flat (less than 1.0°) and is overlain by sand-sized to coarser grained sediment. Finer grained sediments are found in water depths greater than 60 m south of the Point Reyes headland, but they also extend into shallower (less than 40 m) water within Drakes Bay. Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Drakes Bay and Vicinity map area was emergent and the shoreline was about 30 km south and west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. Offshore of the Point Reyes headland, granitic basement rocks are offset vertically about 1.4 km along the Point Reyes Fault Zone; this uplift, combined with west-side-up offset on the San Andreas Fault Zone, has resulted in uplift of the Point Reyes peninsula and the adjacent shelf. Late Pleistocene uplift of marine terraces on the southern Point Reyes peninsula suggests active deformation of offshore structures west of the San Andreas Fault Zone. Pervasive stratal thinning within inferred uppermost Pliocene and Pleistocene deposits above the west strand of the Point Reyes Fault Zone suggests Quaternary active shortening of the curvilinear, northeast- to north-dipping Point Reyes Fault Zone. Lack of clear deformation in the uppermost Pleistocene and Holocene deposits suggests that activity along the Point Reyes Fault Zone has ceased or slowed since about 21,000 years ago. Seafloor habitats in the Drakes Bay and Vicinity map area range from unconsolidated continental-shelf sediment to hard substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Sediment transport in the map area largely is controlled by surface waves and tidal currents in the nearshore and, at depths greater than 20 to 30 m, by tidal and subtidal currents. In the map area, nearshore littoral drift of sand and coarse sediment is to the south, owing to the dominant west-northwest swell direction, and scour from large waves and tidal currents removes and redistributes sediment over large areas of the inner shelf. Tidal currents are particularly strong over the shelf in the map area, and they dominate the current regime in the nearshore. Further offshore, bottom currents generally flow to the northwest, distributing finer grained sediment accordingly.

California↗

Hydrology of the low-level radioactive solid waste burial site and vicinity near Barnwell, South Carolina

Geologic and hydrologic conditions at a burial site for low-level radioactive waste were studied, and migration of leachates from the buried waste into surrounding unconsolidated sediments were evaluated. The burial site and vicinity are underlain by a sequence of unconsolidated sediments of Late Cretaceous, Tertiary, and Quaternary age. These sediments are deposited over a graben which has been filled with sedimentary rocks of Triassic age. Hydraulic properties of the sediments beneath the burial site were determined by laboratory and field tests. Laboratory hydraulic conductivity values ranged from about 10^-7 to 10^-1 feet per day for the clayey sediments to nearly 22 feet per day for aquifer sands. Field aquifer tests indicate a transmissivity of about 22,000 feet squared per day for Cretaceous sediments and about 6,000 feet squared per day for Tertiary sediments. Aquifer tests indicate heterogeneity in the upper 200 feet of the Tertiary sediments. Water samples were analyzed from 51 wells, 5 streams, a Carolina bay, and rainfall at the burial site. The total dissolved solids of the ground water ranged from about 7 to 40 milligrams per liter in the upper clayey sediments to about 150 milligrams per liter in the water in the deeper calcareous sediments. The pH of the ground water ranges from 4.8 to 6.5. This slightly acidic water is corrosive to buried metal. Tritium activity greater than background was detected in sediment cores taken from drill holes adjacent to the burial trenches. High tritium activity occurred at depths above the trench floor. This indicates upward movement of water or vapor to the land surface. Tritium and organic constituents greater than background concentrations were observed in a monitoring well about 10 feet from a trench, indicating lateral migration of radionuclides from the buried waste. Traces of cobalt-60 and tritium greater than background activity were observed in sediment cores collected 5.8 feet beneath the trench floor at one site. A hydrologic model was used to simulate ground-water flow in the study area. Based on the model results the minimum time of travel for ground water to move from the burial site to the nearest stream, Marys Branch Creek, is about 50 years. Radionuclides will move more slowly than the water, and will diminish in activity, because of dispersion and radioactive decay.

South Carolina↗

Core logs from five holes near Kramer, in the Mojave Desert, California

In 1957, five test holes were drilled near Kramer, California, in =he western Mojave Desert. The drill sites are in topographic basins where gravimetric and geologic surveys indicated the presence, beneath alluvium, of a thick section of Quaternary and Tertiary sedimentary and volcanic rocks. Two holes which were deeper tests at sites drilled in 1954 cored only silts, sands and gravels: Four Corners test hole No. 1 was drilled in sec. 20, T. I0 N., R. 6 W., to a depth of 3,500 feet. Four Corners No. 2, in sec. 5, T. I0 N., R. 8 W., was drilled to 2,328 feet. Three holes which were drilled at new sites north of the intersection of U. S. Highways 395 and 466, locally known as Four Corners, encountered colemanite-bearing sediments. The locations and total depths of these holes are as follows: Four Corners No. 3, sec. T. 11 N., R. 6 W., depth 2,568 feet; Four Corners No. 4, near northern edge of sec. 30, T. ll N., R. 6 W., depth 3,500 feet; Four Corners No. 5, near southern edge of sec. 30, depth 1,604 feet. The sections of rocks encountered in these three holes are similar. In each, the colemanite is in fine-grained sediments that lie below sands and gravels, which are about 600 to 800 feet thick, and are underlain by sandstones and conglomerates. Colemanite is most abundant in the cores from Four Corners to hole No. 5, particularly in the 76 feet of core recovered between depths of 1,051 and 1,131 feet. Chemical analysis shows that in this section of core the average content of B203 is above 14 percent. In addition to colemanite, the cores contain sulfides of arsenic, an unusual iron sulfide, and zeolites. This mineralogy of the colemanite-bearing sediments north of Four Corners, together with the general lake bed lithology and the occurrence as a tilted section of beds below sands and gravels, supports correlation with the upper or marginal parts of the borate-bearin8 sediments at the Kramer borate mining district, which have similar features. There is, however, no evidence that any beds are exactly equivalent in age.

Open-File Report↗

Evaluation and proposed study of potential ground-water supplies, Gallup area, New Mexico

The ground-water potential of 5 areas in central-western New Mexico within 85 miles (135 km) of Gallup, N. Mex. was evaluated by reviewing the published literature, inspecting aerial and space photographs, and interviewing ranchers and personnel employed by well-drilling and mineral-exploration companies by telephone. The San Andres Limestone and underlying Glorieta Sandstone of Permian age are the oldest aquifers capable of yielding water of a quality suitable for municipal use. Extreme local variations in hydraulic conductivity and water quality reflect a karstic topography developed on the San Andres Limestone prior to burial by Upper Triassic sediments. The San Andres Limestone and Glorieta Sandstone form an important aquifer in the Grants-Bluewater area where yields of as much as 2,200 gallons per minute (140 l/s) have been obtained. Yields from wells completed in the San Andres-Glorieta aquifer on the Chaco slope and in the Gallup sag-Mogollon slope on the northeast and southeast flanks, respectively, of the Zuni uplift will be much less than those prevailing in the Grants-Bluewater area. Water quality in the San Andres Limestone and Glorieta Sandstone deteriorates with distance away from the axis of the Zuni uplift. Sandstones of Triassic, Jurassic, and Cretaceous age are potential aquifers wherever they are present. Yields to wells tapping these aquifers are generally less than 200 gallons per minute (13 l/s) due to the relatively low hydraulic conductivity. Wells tapping alluvium of Late Cenozoic age along the Rio San Jose and Puerco River and interbedded volcanics and alluvium elsewhere in the area generally yield less than 100 gallons per minute (6 l/s) of water. Tributaries ,of the Rio San Jose that have eroded canyons into Paleozoic and Mesozoic rocks east of the Continental Divide and south of the eastern part of the Zuni uplift have been repeatedly displaced and (or) covered by Quaternary volcanic rocks. The exact location, extent, and depth of buried alluvium in the Late Tertiary valleys is unknown. Water enters the volcanic rocks as rainfall and snowmelt and probably passes quickly into and through, the underlying alluvium into Jurassic and Cretaceous strata. The Gallup Sandstone in the lower part of the Mesaverde Group and the San Andres Limestone and Glorieta Sandstone (combined) are potential sources of water in the North Plains-Malpais area. Sustained yields of 500 to 800 gallons per minute (30 to 50 l/s) can be expected from wells completed in the Gallup Sandstone of Cretaceous age in areas west and north of the Zuni uplift. Properly completed wells tapping the Dakota Sandstone of Cretaceous age and the Westwater Canyon Sandstone Member of the Morrison Formation of Jurassic age locally yield 100 to 250 gallons per minute (6 to 15 l/s) north and east of Gallup. Additional supplies of ground water could be developed from these aquifers. However, arrangements to purchase or lease the water would probably need to be made before these resources could be exploited. Approximately 3,000 gallons per minute (190 l/s) of ground water is being pumped from the Westwater Canyon Member of the Morrison Formation at two uranium mines located about 12 miles (20 km) northeast of Gallup in the Church Rock mining district. The water is pumped into settling ponds at the surface. Effluent from the ponds is allowed to flow into arroyos draining into the Puerco River. Some of the waste water will be used in an ore-processing mill that is expected to be constructed near the mines. However, additional waste water will probably be available from other mines that reportedly will be located in the same mining district. Water salvaged from the current mining operations and (or) pumped from abandoned uranium mines constitutes the most readily available and dependable source of new ground-water supplies for the city of Gallup. The water contains dissolved uranium but is otherwise of better quality than that now avai

Open-File Report↗

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗

Bibliography of literature pertaining to Long Valley Caldera and associated volcanic fields

On May 25-27, 1980, Long Valley caldera was rocked by four M=6 earthquakes that heralded the onset of a wave of seismic activity within the caldera which has continued through the present. Unrest has taken the form of seismic swarms, uplift of the resurgent dome, and areas of vegetation killed by increased CO2 emissions, all interpreted as resulting from magma injection into different levels beneath the caldera, as well as beneath Mammoth Mountain along the southwest rim of the caldera. Continuing economic development in the Mammoth Lakes area has swelled the local population, increasing the risk to people and property if an eruption were to occur. The U.S. Geological Survey (USGS) has been monitoring geophysical activity in the Long Valley area since the mid-1970s and continues to track the unrest in real time with a sophisticated network of geophysical sensors. Hazards information obtained by this monitoring is provided to local, State, and Federal officials and to the public through the Long Valley Observatory. The Long Valley area also was scientifically important before the onset of current unrest. Lying at the eastern foot of the Sierra Nevada, the deposits from this active volcanic system have provided fertile ground for research into Neogene tectonics, Quaternary geology and geomorphology, regional stratigraphy, and volcanology. In the early 1970s, intensive studies of the area began through the USGS Geothermal Investigations Program, owing to the presence of a large young silicic volcanic system. The paroxysmal eruption of Long Valley caldera about 760,000 years ago produced the Bishop Tuff and associated Bishop ash. The Bishop Tuff is a well-preserved ignimbrite deposit that has continued to provide new and developing insights into the dynamics of ignimbrite-forming eruptions. Another extremely important aspect of the Bishop Tuff is that it is the oldest known normally magnetized unit of the Brunhes Chron. Thus, the age of the Bishop Tuff is used to define the beginning of the Brunhes Chron and helps constrain the Brunhes-Matuyama boundary. The Bishop ash, which was dispersed as far east as Nebraska, Kansas, and Texas, provides an important tephrostratigraphic marker throughout the Western United States. The obsidian domes of both the Mono and Inyo Craters, which were produced by rhyolitic eruptions in the past 40,000 years, have been well studied, including extensive scientific drilling through the domes. Exploratory drilling to 3-km depth on the resurgent dome and subsequent instrumentation of the Long Valley Exploratory Well (LVEW) have led to a number of important new insights. Scientific drilling also has been done within the Casa Diablo geothermal field, which, aside from drilling, has been commercially developed and is currently feeding 40 MW of power into the Southern California Edison grid. Studies in all the above-mentioned volcanic fields have contributed to the extensive scientific literature published on the Long Valley region. Although most of this scientific literature has been published since 1970, a significant amount of historical literature extends backward to the late 1800s. The purpose of this bibliography is to compile references pertaining to the Long Valley region from all time periods and all Earth science fields into a single listing, thus providing an easily accessible guide to the published literature for current and future researchers.

Open-File Report↗

Reconnaissance engineering geology of Sitka and vicinity, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

A program to study the engineering geology of most of the larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about Sitka and vicinity is a product of that program. Field-study methods were of a reconnaissance nature, and thus the interpretations in the report are subject to revision as further information becomes available. This report can provide broad geologic guidelines for planners and engineers during preparation of land-use plans. The use of this information should lead to minimizing future loss of life and property due to geologic hazards, especially during very large earthquakes. Landscape of Sitka and surrounding area is characterized by numerous islands and a narrow strip of gently rolling ground adjacent to rugged mountains; steep valleys and some fiords cut sharply into the mountains. A few valley floors are wide and flat and grade into moderate-sized deltas. Glaciers throughout southeastern Alaska and elsewhere became vastly enlarged during the Pleistocene Epoch. The Sitka area presumably was covered by ice several times; glaciers deeply eroded some valleys and removed fractured bedrock along some faults. The last major deglaciation occurred sometime before 10,000 years ago. Crustal rebound believed to be related to glacial melting caused land emergence at Sitka of at least 35 feet (10.7 m) relative to present sea level. Bedrock at Sitka and vicinity is composed mostly of bedded, hard, dense graywacke and some argillite. Beds strike predominantly northwest and are vertical or steeply dipping. Locally, bedded rocks are cut by dikes of fine-grained igneous rock. Host bedrock is of Jurassic and Cretaceous age. Eight types of surficial deposits of Quaternary age were recognized. Below altitudes of 3S feet (10.7 m), the dominant deposits are those of modern and elevated shores and deltas; at higher altitudes, widespread muskeg overlies a mantle of volcanic ash which commonly overlies glacial drift. Alluvial deposits are minor. Man-emplaced embankment fill, chiefly sandy gravel, covers many muskeg and former offshore areas; quarried blocks of graywacke are placed to form breakwaters and to edge large areas of embankment fill and modified ground. The geologic structure of the area is known only in general outlines. Most bedded Mesozoic rocks probably are part of broad northwest-trending complexes of anticlines and synclines. Intrusion of large bodies of plutonic igneous rocks occurred in Tertiary and Cretaceous time. Extensive faulting is suggested by the numerous linear to gently curving patterns of some fiords, lakes, and valleys, and by a group of Holocene volcanoes and cinder cones. Two major northwest-striking fault zones are most prominent: (1) the apparently inactive Chichagof-Sitka fault, about 2.5 miles (4.0 km) northeast of Sitka, and {2) part of the active 800-mile- (1,200-km) long Fairweather-Queen Charlotte Islands fault system, lying about 30 miles (48 km) southwest of the city. Many earthquakes have been reported as felt at Sitka since 1832, when good records were first maintained; several shocks were very strong, but none of them caused severe damage. The closest major earthquake (magnitude about 7.3) causing some damage to the city occurred July 30, 1972, and had an epicenter about 30 miles (48 km) to the southwest. Movement along the Fairweather-Queen Charlotte Islands fault system apparently caused most of the earthquakes felt at Sitka. The probability of destructive earthquakes at Sitka is unknown. The tectonics of the region and the seismic record suggest that sometime in the future an earthquake of a magnitude of about 8 and related to the Fairweather-Queen Charlotte Islands fault system probably will occur in or near the area. Effects from some nearby major earthquakes could cause substantial damage at Sitka. Eight possible effects are as follows: 1. Sudden dis

Open-File Report↗

Preliminary geologic map of the Mount Hood 30- by 60-minute Quadrangle, Northern Cascade Range, Oregon

This map shows the geology of the central and eastern parts of the Cascade Range in northern Oregon. The Quaternary andesitic stratovolcano of Mount Hood dominates the northwest quarter of the quadrangle, but nearly the entire area is underlain by arc-related volcanic and volcaniclastic rocks of the Cascade Range. Most stratigraphic units were emplaced since middle Miocene time, and all are Oligocene or younger. Despite the proximity of the map area to the Portland metropolitan area, large parts remained virtually unstudied or known only from limited reconnaissance until the late 1970s. A notable exception is the area surrounding Mount Hood, where mapping and chemical analyses by Wise (1969) provided a framework for geologic interpretation. Mapping since 1975 was conducted first to understand the stratigraphy and structure of the Columbia River Basalt Group (Anderson, 1978; Vogt, 1981; J.L. Anderson, in Swanson and others, 1981; Vandiver-Powell, 1978; Burck, 1986) and later to examine the geothermal potential of Mount Hood (Priest and others, 1982). Additional mapping was completed in 1985 for a geologic map of the Cascade Range in Oregon (Sherrod and Smith, 1989). From 1987 to 1990, detailed mapping was conducted in three 15-minute quadrangles on a limited basis (D.R. Sherrod, unpublished mapping) (see fig. 1 for index to mapping). An ongoing volcanic hazards study of Mount Hood by the U.S. Geological Survey (Scott and others, 1994) has provided the catalyst for completing the geologic map of the Mount Hood 30-minute by 60-minute quadrangle. As of June 1994, only two broad areas still remain largely unmapped. One of these areas, labeled 'unmapped' on the geologic map, lies in the Salmon River valley south of Zigzag along the west margin of the quadrangle. Although strata of the Columbia River Basalt Group in the Salmon River valley were mapped in detail by Burck (1986), the overlying middle and upper(?) Miocene lava flows, volcaniclastic strata, and intrusions have never been studied. The other poorly known area, the Mutton Mountains in the southeastern part of the map area, consists of Oligocene and lower Miocene volcanic and volcaniclastic rocks. Overlying lava flows of the Columbia River Basalt Group were mapped in some detail by Anderson (in Swanson and others, 1981).

Open-File Report↗

Geology of the Ugashik-Mount Peulik Volcanic Center, Alaska

The Ugashik-Mount Peulik volcanic center, 550 km southwest of Anchorage on the Alaska Peninsula, consists of the late Quaternary 5-km-wide Ugashik caldera and the stratovolcano Mount Peulik built on the north flank of Ugashik. The center has been the site of explosive volcanism including a caldera-forming eruption and post-caldera dome-destructive activity. Mount Peulik has been formed entirely in Holocene time and erupted in 1814 and 1845. A large lava dome occupies the summit crater, which is breached to the west. A smaller dome is perched high on the southeast flank of the cone. Pyroclastic-flow deposits form aprons below both domes. One or more sector-collapse events occurred early in the formation of Mount Peulik volcano resulting in a large area of debris-avalanche deposits on the volcano's northwest flank. The Ugashik-Mount Peulik center is a calcalkaline suite of basalt, andesite, dacite, and rhyolite, ranging in SiO2 content from 51 to 72 percent. The Ugashik-Mount Peulik magmas appear to be co-genetic in a broad sense and their compositional variation has probably resulted from a combination of fractional crystallization and magma-mixing. The most likely scenario for a future eruption is that one or more of the summit domes on Mount Peulik are destroyed as new magma rises to the surface. Debris avalanches and pyroclastic flows may then move down the west and, less likely, east flanks of the volcano for distances of 10 km or more. A new lava dome or series of domes would be expected to form either during or within some few years after the explosive disruption of the previous dome. This cycle of dome disruption, pyroclastic flow generation, and new dome formation could be repeated several times in a single eruption. The volcano poses little direct threat to human population as the area is sparsely populated. The most serious hazard is the effect of airborne volcanic ash on aircraft since Mount Peulik sits astride heavily traveled air routes connecting the U.S. and Europe to Asia. Activity of the type described could produce eruption columns to heights of 15 km and result in significant amounts of ash 250-300 km downwind.

Alaska↗

Ground-water resources of the lower Apalachicola-Chattahoochee-Flint River basin in parts of Alabama, Florida, and Georgia — Subarea 4 of the Apalachicola-Chattahoochee-Flint and Alabama-Coosa-Tallapoosa River basins

The study area is underlain by Coastal Plain sediments of pre-Cretaceous to Quaternary age consisting of alternating units of sand, clay, sandstone, dolomite, and limestone that gradually thicken and dip gently to the southeast. The Upper Floridan aquifer is composed of an off lapping sequence of clastic and carbonate sediments consisting of the Clinchfield Sand, the Ocala, Suwannee, and Tampa Limestones, and the Marianna Formation. The Intermediate system consists of the Intracoastal, Chipola, and Jackson Bluff Formations, is limited in areal extent to the southern part of the basin in Florida, and constitutes an aquifer of low yield. The aquifer-stream-reservoir (flow) system is defined by surface water in hydraulic connection with aquifers and semi-confining units. Simulation of the flow system by using the U.S. Geological Survey’s MODular Finite-Element model (MODFE) of two-dimensional ground-water flow indicated that ground-water availability in Alabama is affected most by changes to lateral and vertical boundary conditions to the Upper Floridan aquifer that might occur in that state, and is affected minimally by changes to ground- and surface-water levels in Georgia. Incomplete hydrologic information precludes definitive assessment of ground- water-resource potential, overpumpage, and potential for additional development; however, simulated-increased pumpage at more than 3 times the October 1986 rates caused drying of the Upper Floridan aquifer in parts of Miller and Lee Counties, Ga. Evaluation of ground-water-development potential in the virtually untapped Intermediate system has questionable reliability due to the lack of data. Increased hypothetical pumpage over October 1986 rates for the Upper Floridan aquifer, located almost entirely in Georgia, indicated reduction in ground-water discharge to streams that reduced flow in the Apalachicola River and to the Bay, especially during droughts. Water budgets prepared from simulation results indicate that discharge to streams and recharge by horizontal and vertical flow are principal hydro-logic mechanisms for moving water into, out of, or through aquifers. The Intermediate system contributes less than 2 percent of the total simulated ground-water discharge to streams; thus, it does not represent an important source of water for the Apalachicola River and Bay.

Alabama, Florida, Georgia↗

Water resources of the Zuni Tribal Lands, McKinley and Cibola counties, New Mexico

An evaluation of the water resources of the Zuni Tribal lands in west-central New Mexico was made to determine the yield, variability, and quality of water available to the Pueblo of Zuni. This study is needed to aid in orderly development of these resources. Rocks of Permian to Quaternary age supply stock, irrigation, and domestic water to the Zuni Indians. The Glorieta Sandstone and San Andres Limestone (Glorieta-San Andres aquifer) of Permian age and sandstones in the Chinle Formation of Triassic age provide most of this water supply. Water in the Glorieta-San Andres aquifer is confined by minimal-permeability shales and is transmitted through the aquifer along interconnected solution channels and fractures. Water-level and water-quality information indicate greater hydraulic conductivities along the southern boundaries of Zuni Tribal lands. Well yields from the Glorieta-San Andres aquifer are as much as 150 gallons per minute and aquifer transmissivity ranges from 30 to 1,400 feet squared per day. Long-term, water-level declines of as much as 29 feet have been measured near pumping centers at Black Rock. Multiple-well aquifer tests are needed to further define aquifer properties (storage, transmissivity, and leakage from confining units) and the effects of well design on well yields. Dissolved-solids concentrations in water from the aquifer ranged from 331 to 1,068 milligrams per liter. Calcium and sulfate are the predominant ions. Water in sandstones of the Chinle Formation is confined by adjacent shales and is transmitted along interconnected fractures. Well yields range from 5 to 125 gallons per minute and aquifer transmissivity ranges from 40 to 1,400 feet squared per day. Water-level declines of as much as 27 feet have been measured near Zuni Village. Dissolved-solids concentrations in water from the aquifer ranged from 215 to 1,980 milligrams per liter. Sodium and bicarbonate are the predominant ions. Other sources of ground water are used primarily for livestock watering by means of windmills, with the exception of buried alluvial channel deposits along the Rio Pescado. These deposits provide domestic and irrigation water through springs and wells to Pescado and Black Rock. The Bidahochi Formation of Miocene and Pliocene age could potentially provide an additional supply of water chemically suitable for most uses. Seismic-reflection techniques are being used to locate buried channels eroded in the rocks underlying the Bidahochi Formation. These buried channels may contain thicker sections of saturated sands and gravels that could be developed for stock and domestic use.

New Mexico↗

Reconnaissance geology of the Harrat Hutaymah Quadrangle, sheet 26/42A, Kingdom of Saudi Arabia

Harrat Hutaymah quadrangle is underlain mostly by Proterozoic rocks that are intruded and partly covered in the north by the Quaternary extrusive products of the Harrat Hutaymah basalt field. The Proterozoic basement of the quadrangle may be broadly divided into the older (circa 650 Ma and older) Laban dioritic complex in the east and the younger (to possibly coeval) Kilab monzogranite batholith in the west. The dioritic complex is overlain by a monoclinal section of mostly intermediate composition volcanic and sedimentary rocks in the southeast (the Hibshi formation - dated at circa 632 Ma). The source plutons for the Hibshi volcanic rocks are not well constrained; the volcanics may be comagmatic with late phases of the Kilab batholith. All of these rocks are intruded by a younger (post-orogenic and circa 600 Ma) suite of more evolved granitic plutons and dikes. Several of these evolved granites may represent the root-zones of volcanic caldera complexes. The Hibshi formation is divided into several members that are described in detail based on data from measured sections at the type section (Jibal Hibshi). There is considerable variation in composition and facies within the formation; individual members thicken and thin laterally, and some pinch out entirely over distances of only a few kilometers. Volcanic members at Jabal Hibshi are mostly andesitic to dacitic pyroclastic rocks, but at Jabal Aba al Liqah, basaltic and rhyolitic flow rocks predominate. The Hibshi formation consists of clastic sediments of volcanic and plutonic provenance intertonguing with the varied products of multiple subaerial volcanic centers. For these reasons, regional correlation based only on lithology is discouraged. The Harrat Hutaymah basalt field contains abundant basaltic tephra as well as alkali olivine basalt flows. Tuff rings formed by explosive eruptions above mantle diatremes. Peridotite nodules are common in the basaltic tuff and in some flow rocks. Basaltic volcanism in the region began at a later time (circa 1.8 Ma) than at the other Saudi Arabian harrats; probably due to progressive mantle underflow related to Red Sea rifting. Areas having mineral resource potential include the ancient Samirah gold mine, a quartz-vein deposit in Laban complex dioritic rocks, and areas with tin-tungsten potential in the evolved plutons. Aggregate and pozzolan deposits occur in the basaltic tephra of the Harrat Hutaymah volcanic field and unusually deep groundwater reservoirs are present in the filled tuff-ring craters of the volcanic field.

Open-File Report↗

Preliminary metallogenic belt and mineral deposit maps for northeast Asia

The metallogenic belts and locations of major mineral deposits of Northeast Asia are portrayed on Sheets 1-4. Sheet 1 portrays the location of significant lode deposits and placer districts at a scale of 1:7,500,000. Sheets 2-4 portray the metallogenic belts of the region in a series of 12 time-slices from the Archean through the Quaternary at a scale of 1:15,000,000. For all four map sheets, a generalized geodynamics base map, derived from a more detailed map by Parfenov and others (2003), is used as an underlay for the metallogenic belt maps. This geodynamics map underlay permits depicts the major host geologic units and structures that host metallogenic belts. Four tables are included in this report. A hierarchial ranking of mineral deposit models is listed in Table 1. And summary features of lode deposits, placer districts, and metallogenic belts are described in Tables 2, 3, and 4, respectively. The metallogenic belts for Northeast Asia are synthesized, compiled, described, and interpreted with the use of modern concepts of plate tectonics, analysis of terranes and overlap assemblages, and synthesis of mineral deposit models. The data supporting the compilation are: (1) comprehensive descriptions of mineral deposits; (2) compilation and synthesis of a regional geodynamics map the region at 5 million scale with detailed explanations and cited references; and (3) compilation and synthesis of metallogenic belt maps at 15 million scale with detailed explanations and cited references. These studies are part of a major international collaborative study of the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia that is being conducted from 1997 through 2002 by geologists from earth science agencies and universities in Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. Companion studies and previous publications are: (1) a detailed geodynamics map of Northeast Asia (Parfenov and 2003); (2) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000; Obolenskiy and others, 2003); and (3) a database on significant metalliferous and selected nonmetalliferous lode deposits, and selected placer districts (Ariunbileg and others, 2003).

Open-File Report↗

Geology, hydrology, and water quality in the Fresno area, California

The Fresno area comprises about 1.400 square miles lying west of the foothills of the Sierra Nevada and east of the trough of the San Joaquin Valley. The rainfall averages less than 10 inches per year causing agricultural development to depend mainly on surface-water deliveries and ground-water pumpage. Surface-water deliveries and ground-water pumpage, however, vary considerably from year to year. For example, in agricultural year 1958 (April 1, 1958-March 31, 1959) surface-water deliveries were about 1,340,000 acre-feet and agricultural ground-water pumpage was about 1,740,000 acre-feet, but in agricultural year 1960 deliveries were only about 560,000 acre-feet and pumpage was about 2,520,000 acre-feet. Alluvial fans are the dominant geomorphic features in the area. Small alluvial fans have been formed near the foothills by the deposits from the numerous intermittent streams that lie both north and south of the Kings River. Thicker and much more extensive alluvial fans have been formed under most of the area by deposits from the San Joaquin and Kings Rivers. Geologic units in the area consist of consolidated rocks and unconsolidated deposits. In turn, consolidated rocks consist of basement complex of pre-Tertiary age and marine and continental sedimentary rocks of Cretaceous and Tertiary age. Unconsolidated deposits are of both Tertiary and Quaternary age. Most of the geologic units dip gently southwestward approximately paralleling the back slope of the Sierra Nevada. Although some of these geologic units are faulted, especially in the deep subsurface, faulting has not affected the occurrence and movement of fresh ground water. The basement complex crops out along the eastern border of the area and yields only small amounts of water to wells; the marine and continental sedimentary rocks do not crop out in the area and do not yield any water to wells. The unconsolidated deposits are divided into an older series of Tertiary and Quaternary age, and a younger series of Quaternary age. The continental deposits of Tertiary and Quaternary age crop out beneath the extreme southeastern part of the area and yield small amounts of water to wells, and the deposits of Quaternary age crop out over most of the area and yield more than 90 percent of the water pumped from wells. The deposits of Quaternary age in turn are divided into older alluvium, lacustrine and marsh deposits, younger alluvium, flood-basin deposits. and sand dunes. The older alluvium is by far the most important aquifer in the Fresno area. It consists of intercalated lenses of clay, silt, silty and sandy clay, clayey and silty sand, sand, gravel, cobbles, and boulders, and in general it is fine grained near the trough of the valley and beneath the alluvial fans of intermittent streams. In the older alluvium, yields to wells range from less than 20 gpm (gallons per minute) to more than 3,000 gpm. The lacustrine and marsh deposits occur only in the subsurface in the western part of the area. Consisting mostly of silt and clay, they are virtually impermeable and thus restrict the vertical movement of water. These deposits from oldest to youngest are designated the E-clay, the C-clay, and the A-clay. The E-clay is the thickest and most extensive of all the lacustrine and marsh deposits. Because the clays tend to confine ground water in the Fresno area, five water bodies are recognized. These are the unconfined water body, the shallow water body, the confined water body below the A-clay, the confined water body below the C-clay, and the confined water body below the E-clay. The unconfined water body underlies most of the Fresno area. The shallow and confined water bodies underlie parts of the extreme western part of the area. There, heads in successively underlying water bodies are less than those in overlying water bodies, indicating that some ground water moves slowly downward through the clays. From agricultural years 1957 to 1962, outflow in the area exceeded inflow. As a result, for this period, the Fresno area had a net deficit of about 2,890,000 acre-feet. This deficit was made up for mostly by a decline in ground water stored. Water levels in all water bodies have been declining over the years, yet when streamflow and canal deliveries are large they show a general rise. The general movement of ground water in the Fresno area is toward the southwest, although pumping depressions near Fresno and near the western part of the area, cause ground water to move northward, southward, and westward toward them.

California↗

Reconnaissance engineering geology of the Metlakatla area, Annette Island, Alaska, with emphasis on evaluation of earthquakes and other geologic hazards

A program to study the engineering geology of most larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about the Metlakatla area, Annette Island, is a product of that program. Field-study methods were of a reconnaissance nature, and thus the interpretations in the report are tentative. Landscape of the Metlakatla Peninsula, on which the city of Metlakatla is located, is characterized by a muskeg-covered terrane of very low relief. In contrast, most of the rest of Annette Island is composed of mountainous terrane with steep valleys and numerous lakes. During the Pleistocene Epoch the Metlakatla area was presumably covered by ice several times; glaciers smoothed the present Metlakatla Peninsula and deeply eroded valleys on the rest. of Annette Island. The last major deglaciation was completed probably before 10,000 years ago. Rebound of the earth's crust, believed to be related to glacial melting, has caused land emergence at Metlakatla of at least 50 ft (15 m) and probably more than 200 ft (61 m) relative to present sea level. Bedrock in the Metlakatla area is composed chiefly of hard metamorphic rocks: greenschist and greenstone with minor hornfels and schist. Strike and dip of beds are generally variable and minor offsets are common. Bedrock is of late Paleozoic to early Mesozoic age. Six types of surficial geologic materials of Quaternary age were recognized: firm diamicton, emerged shore, modern shore and delta, and alluvial deposits, very soft muskeg and other organic deposits, and firm to soft artificial fill. A combination map unit is composed of bedrock or diamicton. Geologic structure in southeastern Alaska is complex because, since at least early Paleozoic time, there have been several cycles of tectonic deformation that affected different parts of the region. Southeastern Alaska is transected by numerous faults and possible faults that attest to major movements of the earth's crust. The latest of the major tectonic events in the Metlakatla region occurred in middle Tertiary time; some minor fault activity probably continues today at depth. Along the outer coast of southeastern Alaska and British Columbia, major faulting activity occurs in the form of active, strike-slip movement along the Queen Charlotte fault about 100 mi (160 kin) west-southwest of Metlakatla. Some branching subsidiary faults also may be active, at least one of which may be the Sandspit fault. Many major and smaller earthquakes occur along the outer coast. These shocks are related to movements along the Queen Charlotte fault. A few small earthquakes occur in the region between the outer coast and the Coast Mountains, which includes Metlakatla. 0nly a few earthquakes have been reported as felt at Metlakatla; these shocks and others felt in the region are tabulated. Historically, the closest major earthquake was the magnitude 8.1 Queen Charlotte Islands earthquake of August 22, 1949, which occurred along the Queen Charlotte fault 125 mi (200 km) southwest of Metlakatla. No damage was reported at Metlakatla. The probability of destructive earthquakes affecting Metlakatla is unknown. A consideration of the tectonics and earthquake history of the region, however, suggests that sometime in the future an earthquake with a magnitude of about 8 will occur along that segment of the Queen Charlotte fault nearest to Metlakatla. Smaller earthquakes with magnitudes of 6 or more might occur elsewhere in the Metlakatla region or south-southeastward near Dixon Entrance or Hecate Strait. Several geologic effects that have characterized large earthquakes elsewh6re may be expected to accompany some of the possible major earthquakes that might affect the Metlakatla area in the future. Evaluation of effects indicates that fault displacement and tectonic uplift or subsidence are probably unlikely, and ground shaking in general probably would be strongest

Open-File Report↗

Surficial Geologic Map of the Worcester North-Oxford- Wrentham-Attleboro Nine-Quadrangle Area in South- Central Massachusetts

The surficial geologic map layer shows the distribution of nonlithified earth materials at land surface in an area of nine 7.5-minute quadrangles (417 mi2 total) in south-central Massachusetts (fig. 1). Across Massachusetts, these materials range from a few feet to more than 500 ft in thickness. They overlie bedrock, which crops out in upland hills and in resistant ledges in valley areas. The geologic map differentiates surficial materials of Quaternary age on the basis of their lithologic characteristics (such as grain size and sedimentary structures), constructional geomorphic features, stratigraphic relationships, and age. Surficial materials also are known in engineering classifications as unconsolidated soils, which include coarse-grained soils, fine-grained soils, or organic fine-grained soils. Surficial materials underlie and are the parent materials of modern pedogenic soils, which have developed in them at the land surface. Surficial earth materials significantly affect human use of the land, and an accurate description of their distribution is particularly important for water resources, construction aggregate resources, earth-surface hazards assessments, and land-use decisions. The mapped distribution of surficial materials that lie between the land surface and the bedrock surface is based on detailed geologic mapping of 7.5-minute topographic quadrangles, produced as part of an earlier (1938-1982) cooperative statewide mapping program between the U.S. Geological Survey and the Massachusetts Department of Public Works (now Massachusetts Highway Department) (Page, 1967; Stone, 1982). Each published geologic map presents a detailed description of local geologic map units, the genesis of the deposits, and age correlations among units. Previously unpublished field compilation maps exist on paper or mylar sheets and these have been digitally rendered for the present map compilation. Regional summaries based on the Massachusetts surficial geologic mapping studies discuss the ages of multiple glaciations, the nature of glaciofluvial, glaciolacustrine, and glaciomarine deposits, and the processes of ice advance and retreat across Massachusetts (Koteff and Pessl, 1981; papers in Larson and Stone, 1982; Oldale and Barlow, 1986; Stone and Borns, 1986; Warren and Stone, 1986). This compilation of surficial geologic materials is an interim product that defines the areas of exposed bedrock and the boundaries between glacial till, glacial stratified deposits, and overlying postglacial deposits. This work is part of a comprehensive study to produce a statewide digital map of the surficial geology at a 1:24,000-scale level of accuracy. This surficial geologic map layer covering nine quadrangles revises previous digital surficial geologic maps (Stone and others, 1993; MassGIS, 1999) that were compiled on base maps at regional scales of 1:125,000 and 1:250,000. The purpose of this study is to provide fundamental geologic data for the evaluation of natural resources, hazards, and land information within the Commonwealth of Massachusetts.

Open-File Report↗

Seismic and tsunami hazard in Puerto Rico and the Virgin Islands

Executive Summary Puerto Rico and the Virgin Islands are located at an active plate boundary between the North American plate and the northeast corner of the Caribbean plate. The region was subject in historical times to large magnitude earthquakes and devastating tsunamis. A major downward tilt of the sea floor north of Puerto Rico and the Virgin Islands, large submarine rockslides, and an unusually large negative gravity anomaly are also indicative of a tectonically active region. Scientists have so far failed to explain the deformation of this region in a coherent and predictable picture, such as in California, and this has hampered their ability to assess seismic and tsunami hazards in the region. The NE corner of the Caribbean is unique among the seismically-active regions of the United States in that it is mostly covered by water. This fact presents an additional challenge for seismic and tsunami hazard assessment and mitigation. The workshop, convened in San Juan on March 23-24, 1999, was "historic" in that it brought together for the first time a broad spectrum of scientists, engineers, and public and private sector officials who deal with such diverse questions as tectonic models, probabilistic assessment of seismic hazard, prediction of tsunami runup, strong ground motion, building codes, stability of man-made structures, and the public’s preparedness for natural disasters. It was an opportunity for all the participants to find out how their own activity fit into the broad picture of science and how it aids society in hazard assessment and mitigation. In addition, the workshop was offered as a continuing education course at the Colegio de Ingenieros y Agrimensores de Puerto Rico, which assured a rapid dissemination of the results to the local community. A news conference which took place during the workshop alerted the public to the efforts of the USGS, other Federal agencies, the Commonwealth of Puerto Rico, universities and the private sector. During the first day of the workshop, participants from universities, federal institutions, and consulting firms in Puerto Rico, the Virgin Islands, the continental U.S., Dominican Republic, and Europe reviewed the present state of knowledge including a review and discussion of present plate models, recent GPS and seismic reflection data, seismicity, paleoseismology, and tsunamis. The state of earthquake/tsunami studies in Puerto Rico was presented by several faculty members from the University of Puerto Rico at Mayaguez. A preliminary seismic hazard map was presented by the USGS and previous hazard maps and economic loss assessments were considered. During the second day, the participants divided into working groups and prepared specific recommendations for future activities in the region along the six following topics below. Highlights of these recommended activities are: Marine geology and geophysics – Acquire deep-penetration seismic reflection and refraction data, deploy temporary ocean bottom seismometer arrays to record earthquakes, collect high-resolution multibeam bathymetry and side scan sonar data of the region, and in particular, the near shore region, and conduct focussed high-resolution seismic studies around faults. Determine slip rates of specific offshore faults. Assemble a GIS database for available marine geological and geophysical data. Paleoseismology and active faults - Field reconnaissance aimed at identifying Quaternary faults and determining their paleoseismic chronology and slip rates, as well as identifying and dating paleoliquefaction features from large earthquakes. Quaternary mapping of marine terraces, fluvial terraces and basins, beach ridges, etc., to establish framework for understanding neotectonic deformation of the island. Interpretation of aerial photography to identify possible Quaternary faults. Earthquake seismology – Determine an empirical seismic attenuation function using observations from local seismic networks and recently-installed broad-band stations. Evaluate existing earthquake catalogs from local networks and regional stations, complete the catalogs. Transcribe the pre-1991 network data from 9-track tape onto more stable archival media. Calibrate instruments of local networks. Use GPS measurement to constrain deformation rates used in seismic-hazard maps. Engineering – Prepare liquefaction susceptibility maps for the urban areas. Update and improve databases for types of site conditions. Collect site effect observations and near-surface geophysical measurements for future local (urban-area) hazard maps. Expand the number of instruments in the strong motion program. Develop fragility curves for Puerto Rico construction types and details, and carry out laboratory testing on selected types of mass-produced construction. Consider tsunami design in shoreline construction projects. Tsunami hazard - Extract tsunami observations from archives and develop a Caribbean historical tsunami database. Analyze prehistoric tsunami deposits. Collect accurate, up-to-date, near-shore topography and bathymetry for accurate inundation models. Prepare tsunami flooding and evacuation maps. Establish a Caribbean Tsunami Warning System for Puerto Rico and the Virgin Islands. Evaluate local, regional, national, and global seismic networks and equipment, and their role in a tsunami warning system. Societal concerns – Prepare warning messages, protocols, and evacuation routes for earthquake, tsunami, and landslide hazards for Puerto Rico and the U.S. Virgin Islands. Advocate enforcement of existing building codes. Prepare non-technical hazard assessment maps for political and educational uses. Raise the awareness of potentially affected populations by presentations at elementary schools, by the production of a tsunami video, and by distribution of earthquake preparedness manuals in newspaper supplements. Promote partnerships at state and federal level for long-term earthquake and tsunami hazard mitigation. This partnership should also include the private sector such as the insurance industry, telecommunication companies, and the engineering community. The following reports of the various working groups are the cumulative recommendations of the community of scientists, engineers, and public officials, who participated in the workshop. The list of participants and the workshop’s agenda are given in the appendix. Marine and Geology and Geophysics Working Group Paleoseismology and Active Faults Working Group Joint Working Group for Earthquake Seismology and Engineering Tsunami Working Group Societal Concerns Working Group

Puerto Rico and the Virgin Islands↗