Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources
USGS2000

Sr and Nd isotopic compositions, age and petrogenesis of A-type granitoids of the Vernon Supersuite, New Jersey Highlands, USA

Voluminous late Mesoproterozoic monzonite through granite of the Vernon Supersuite underlies an area of approximately 1300 km2 in the Highlands of northern New Jersey. The Vernon Supersuite consists of hastingsite ?? biotite-bearing granitoids of the Byram Intrusive Suite (BIS) and hedenbergite-bearing granitoids of the Lake Hopatcong Intrusive Suite (LHIS). These rocks have similar major and trace element abundances over a range of SiO2 from 58 to 75 wt.%, are metaluminous to weakly peraluminous, and have a distinctive A-type chemistry characterized by high contents of Y, Nb, Zr, LREE, and Ga/Al ratios, and low MgO, CaO, Sr and HREE. Whole-rock Rb-Sr isochrons of BIS granite yield an age of 1116 ?? 41 Ma and initial 87Sr/86Sr ratio of 0.70389, and of LHIS granite an age of 1095 ?? 9 Ma and initial 87Sr/86Sr ratio of 0.70520. Both suites have similar initial 143Nd/144Nd ratios of 0.511267 to 0.511345 (BIS) and 0.511359 to 0.511395 (LHIS). Values of ??(Nd) are moderately high and range from +1.21 to +2.74 in the BIS and +2.24 +2.95 in the LHIS. Petrographic evidence, field relationships, geochemistry, and isotopic data support an interpretation of comagmatism and the derivation of both suites from a mantle-derived or a juvenile lower crustal parent with little crustal assimilation. Both suites crystallized under overlapping conditions controlled by P-T-f(H(2)O). Lake Hopatcong magma crystallized at a liquidus temperature that approached 900??C and a pressure of about 6 kbar, and remained relatively anhydrous throughout its evolution. Initial P-T conditions of the Byram magma were ??? 850??C and about 5.5 kbar. BIS magma was emplaced contemporaneous with, or slightly preceding LHIS magma, and both magmas were emplaced during a compressional tectonic event prior to granulite facies metamorphism that occurred in the Highlands between 1080 and 1030 Ma. (C) 2000 Elsevier Science B.V. All rights reserved.

LITHOS↗
USGS2001

Ocean Drilling Program Leg 178 (Antarctic Peninsula): Sedimentology of glacially influenced continental margin topsets and foresets

Ocean Drilling Program Leg 178 (February-April 1998) drilled two sites (Sites 1097 and 1103) on the outer Antarctic Peninsula Pacific continental shelf. Recovered strata are no older than late Miocene or early Pliocene (<4.6 Ma). Recovery at shallow depths in loosely consolidated and iceberg-turbated bouldery sediment was poor but improved with increasing depth and consolidation to allow description of lithofacies and biofacies and interpretation of depositional environment. Site 1097 lies on the outer shelf within Marguerite Trough which is a major outlet for ice expanding seaward from the Antarctic Peninsula and reached a maximum depth drilled of 436.6 m below the sea floor (mbsf). Seismic stratigraphic data show flat-lying upper strata resting on strata that dip gently seaward. Uppermost strata, to a depth of 150 mbsf, were poorly recovered, but data suggest they consist of diamictites containing reworked and abraded marine microfauna. This interval is interpreted as having been deposited largely as till produced by subglacial cannibalization of marine sediments (deformation till) recording ice sheet expansion across the shelf. Underlying gently dipping strata show massive, stratified and graded diamictite facies with common bioturbation and slump stuctures that are interbedded with laminated and massive mudstones with dropstones. The succession contains a well-preserved in situ marine microfauna typical of open marine and proglacial marine environments. The lower gently dipping succession at Site 1097 is interpreted as a complex of sediment gravity flows formed of poorly sorted glacial debris. Site 1103 was drilled in that part of the continental margin that shows uppermost flat-lying continental shelf topsets overlying steeper dipping slope foresets seaward of a structural mid-shelf high. Drilling reached a depth of 363 mbsf with good recovery in steeply dipping continental slope foreset strata. Foreset strata are dominated by massive and chaotically stratified diamictites interbedded with massive and graded sandstones and mudstones. The sedimentary record and seismic stratigraphy is consistent with deposition on a continental slope from debris flows and turbidity currents released from a glacial source. Data from Sites 1097 and 1103 suggest the importance of aggradation of the Antarctic Peninsula continental shelf by tilt deposition and progradation of the slope by mass flow. This may provide a model for the interpretation of Palaeozoic and Proterozoic glacial successions that accumulated on glacially influenced continental margins.

Marine Geology↗
USGS1999

The Cadiz margin study off Spain: An introduction

The Cadiz continental margin of the northeastern Gulf of Cadiz off Spain was selected for a multidisciplinary project because of the interplay of complex tectonic history between the Iberian and African plates, sediment supply from multiple sources, and unique Mediterranean Gateway inflow and outflow currents. The nature of this complex margin, particularly during the last 5 million years, was investigated with emphasis on tectonic history, stratigraphic sequences, marine circulation, contourite depositional facies, geotechnical properties, geologic hazards, and human influences such as dispersal of river contaminants. This study provides an integrated view of the tectonic, sediment supply and oceanographic factors that control depositional processes and growth patterns of the Cadiz and similar modem and ancient continental margins.

Marine Geology↗
USGS2001

A lone biodetrital mound in the Chesterian (Carboniferous) of Alabama?

A carbonate mound in the Chesterian Bangor Limestone of Lawrence County, Alabama, consists chiefly of packstone and grainstone dominated by echinoderm ossicles and fragments of fenestrate bryozoans. In-situ colonies of the rugose coral Caninia flaccida comprise about 8% of the mound by volume. The exposed portion of the mound is approximately 25 m wide, 1.6 m thick at the thickest point and roughly circular in plan. The mound developed on top of a shallow ooid shoal that had been cemented and stabilised during an earlier episode of sub-aerial exposure. Subsequent flooding of the exposed shoal surface permitted establishment of the mound biota. Lateral and vertical facies relationships suggest that the mound possessed about 45 cm of synoptic relief when fully developed. Rugose corals, fenestrate and ramose bryozoans, stalked echinoderms, and sessile soft-bodied organisms encrusted by foraminifera colonised the shoal, forming a mound. Baffling resulted in deposition of mixed-fossil packstone containing locally derived debris and coated grains from the surrounding sea floor. Strong currents within the mound are indicated by preferred orientation of corals and by coarse, commonly cross-stratified grainstone in channels between neighboring coral colonies. Corals are most abundant on the windward side of the mound, where they account for about 13% of the mound compared to 6- 10% in the central part of the mound, and 2-4% on the leeward flank. Biodetrital mounds such as the one described here are uncommon in upper Paleozoic strata and previously unknown in the Bangor Limestone. Of 10 carbonate buildups we examined in the Bangor in Alabama and Tennessee, only one is a biodetrital mound. Two are rugose coral-microbial reefs, one is a coral biostrome, and six are dominated by microbialite. The Bangor shelf, previously interpreted as sedimentologically simple, appears to contain many small mounds of quite varied characteristics. Also, the discovery of a biodetrital mound in the Chesterian of Alabama suggests that there may be more kinds of upper Paleozoic mounds than commonly acknowledged. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology↗
USGS1998

Weakness of the lower continental crust: A condition for delamination, uplift, and escape

We discuss three interconnected processes that occur during continental compression and extension: delamination of the lower crust and sub-crustal lithosphere, escape tectonics (i.e., lateral crustal flow), and crustal uplift. We combine calculations of lithospheric viscosity–depth curves with geologic observations and seismic images of the deep crust to infer the mechanisms controlling these processes. The basic driving force for delamination is the negative buoyancy (in some regions) of the continental lower crust and sub-crustal lithosphere with respect to the warm, mobile asthenosphere. A phase transformation in the lower crust from mafic granulite facies to eclogite may be important for providing negative buoyancy. Where negative buoyancy exists, the onset of delamination is mainly a question of the presence of a suitable decoupling zone between the denser lithosphere and the lighter upper and middle crust. We estimate the depth to potential decoupling zones by calculating lithospheric viscosity–depth curves based on reasonable geotherms and models of lithospheric composition. Low-viscosity zones occur at three depths: (1) at the base of the felsic (upper) crust; (2) within the lower crust; and (3) several tens of kilometers below the Moho. The commonly observed absence of a high-velocity (>6.8 km/s) lower crustal layer beneath extended crust may be explained by delamination wherein decoupling occurs at the top of the lower crust. In addition to being zones of potential decoupling, crustal low-viscosity zones are avenues for lateral crustal flow, a process that is often referred to as crustal escape (e.g., eastern Tibetan Plateau). The third process addressed here, crustal uplift, is mainly found in compressional environments and can be related to mature (i.e., complete or nearly complete) delamination and/or a thick low-viscosity lower crust. Mature delamination generates crustal uplift as the sinking, dense lithosphere is replaced by the mobilized hot asthenosphere. A very different mechanism of uplift is associated with some continental high plateaus, where a high convergence rate and the lateral intrusion of cold, rigid shield crust into warm, low-viscosity orogenic crust acts like a solid piston moving into hydraulic fluid. The displacement of the low-viscosity crustal `fluid' generates broad plateau uplifts. Modern examples are the intrusion of the Indian shield into the Tibetan Plateau and the Brazilian shield into the Andes. All of these processes, delamination, tectonic escape, and uplift are interconnected and are related to weakness in the lower crust during continental compression and extension.

Tectonophysics↗
USGS1999

Depositional history of the Fire Clay coal bed (Late Duckmantian), Eastern Kentucky, USA

More than 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores were used in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability in the Fire Clay (Hazard No. 4) coal bed across a 1860 km2 area of the Eastern Kentucky Coal Field. The bench architecture of the Fire Clay coal bed consists of uncommon leader benches, a persistent but variable lower bench, a widespread, and generally thick upper bench, and local, variable rider benches. Rheotrophic conditions are inferred for the leader benches and lower bench based on sedimentological associations, mixed palynomorph assemblages, locally common cannel coal layers, and generally high ash yields. The lower bench consistently exhibits vertical variability in petrography and palynology that reflects changing trophic conditions as topographic depressions infilled. Infilling also led to unconfined flooding and ultimately the drowning of the lower bench mire. The drowned mire was covered by an air-fall volcanic-ash deposit, which produced the characteristic flint clay parting. The extent and uniform thickness of the parting suggests that the ash layer was deposited in water on a relatively flat surface without a thick canopy or extensive standing vegetation across most of the study area. Ash deposits led to regional ponding and establishment of a second planar mire. Because the topography had become a broadly uniform, nutrient-rich surface, upper-bench peats became widespread with large areas of the mire distant to clastic sources. Vertical sections of thick (> 70 cm), low-ash yield, upper coal bench show a common palynomorph change from arborescent lycopod dominance upward to fern and densospore-producing, small lycopod dominance, inferred as a shift from planar to ombrotrophic mire phases. Domed mires appear to have been surrounded by wide areas of planar mires, where the coal was thinner (< 70 cm), higher in ash yield, and dominated by arborescent lycopods. Rectangular thickness trends suggest that syndepositional faulting influenced peat accumulation, and possibly the position of the domed mire phase. Faulting also influenced post-depositional clastic environments of deposition, resulting in sandstone channels with angular changes in orientation. Channels and lateral facies were locally draped by high-ash-yield rider coal benches, which sometimes merged with the upper coal bench. These arborescent-lycopod dominant rider coal benches were profoundly controlled by palcotopography, much like the leader coal benches. Each of the benches of coal documented here represent distinctly different mires that came together to form the Fire Clay coal bed, rather than a single mire periodically split by clastic influx. This is significant as each bench of the coal has its own characteristics, which contribute to the total coal characteristics. The large data set allows interpretation of both vertical and lateral limits to postulated domed phases in the upper coal bench, and to the delineation of subtle tectonic structures that allow for meaningful thickness projections beyond the limits of present mining.A study was conducted to analyze the depositional history of the Fire Clay coal bed in the eastern Kentucky coal field. The study involved over 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability.

International Journal of Coal Geology↗
USGS1999

Ordovician reef-hosted Jiaodingshan Mn-Co deposit and Dawashan Mn deposit, Sichuan Province, China

The Jiaodingshan Mn-Co and Dawashan Mn deposits are located in the approximately 2-m thick Daduhe unit of the Wufengian strata of Late Ordovician (Ashgill) age. Paleogeographic reconstruction places the deposits at the time of their formation in a gulf between Chengdu submarine rise and the Kangdian continent. The Jiaodingshan and Dawashan deposits occur in algal-reef facies, the former in an atoll-like structure and the latter in a pinnacle reef. Ores are mainly composed of rhodochrosite, kutnahorite, hausmannite, braunite, manganosite, and bementite. Dark red, yellowish-pink, brown, green-gray, and black ores are massive, banded, laminated, spheroidal, and cryptalgal (oncolite, stromatolite, algal filaments) boundstones. Blue, green, and red algal fossils show in situ growth positions. Samples of high-grade Jiaodingshan and Dawashan ores assay as much as 66.7% MnO. Jiaodingshan Mn carbonate ores have mean contents of Ba, Co, and Pb somewhat higher than in Dawashan ores. Cobalt is widely distributed and strongly enriched in all rock types as compared to its crustal mean content. Cobalt is correlated with Cu, Ni, and MgO in both deposits and additionally with Ba and Zn in the Dawashan deposit. The δ 13 C(PDB) values of Mn carbonate ores (-7.8 to -16.3‰) indicate contributions of carbon from both seawater bicarbonate and the bacterial degradation of organic matter, the latter being 33% to 68%, assuming about -24‰ for the δ 13 C(PDB) of the organic matter. Host limestones derived carbon predominantly from seawater bicarbonate δ 13 13C(PDB) of +0.2 to -7‰). NW-trending fault zones controlled development of lithofacies, whereas NE-trending fault zones provided pathways for movement of fluids. The source of Co, Ni, and Cu was mainly from weathering of mafic and ultramafic rocks on the Kangdian continent, whereas contemporaneous volcanic eruptions were of secondary importance. The reefs were likely mineralized during early diagenesis under shallow burial. The reefs were highly porous and acted as the locus for metasomatic replacement by Mn that combined with CO 2 produced during oxidation of organic matter in the zone of sulfate reduction and seawater bicarbonate. That metasomatic replacement formed the rhodochrosite ores.

Ore Geology Reviews↗
USGS1998

The chemical evolution of Kurnub Group palcowater in the Sinai-Negev province - A mass balance approach

The chemical evolution of the Kurnub Group paleowater was studied starting from rainwater in recharge areas of the Sinai and along groundwater flowpaths leading to the natural outlets of this regional aquifer. This was achieved by investigating the chemical composition of groundwater, ionic ratios, degrees of saturation with common mineral species, normative analysis of dissolved salts and by modeling of rock/water interaction and mixing processes occurring along groundwater flow paths. The initial groundwater composition used is from the Nakhel well in Sinai. It evolves from desert rainwater percolating through typical Kurnub Group lithology in Sinai. This rainwater dissolves mainly gypsum, halite and dolomite together with smaller amounts of marine aerosol and K-feldspar. At the same time it precipitates calcite, SiO2, smectite and degasses CO2. Between the area of Nakhel and the northern Negev the chemistry of Kurnub Group waters is influenced by dissolution of halite and lesser amounts of gypsum of surficial origin in recharge areas, small amounts of feldspars and of dolomite cement in sandstones eroded from the Arabo-Nubian igneous massif of Sinai and organic degradation-derived CO2. Concomitantly, there is precipitation of calcite, smectite, SiO2 and probably analcime characteristic of sediments in continental closed basins. North of the Negev, the Kurnub Group fluids are diluted and altered by mixing with Judea Group aquifer groundwaters. On the E there is mixing with residual brines from the water body ancestral to the Dead Sea, prior to discharge into the Arava valley. Rock/water interaction indicated by NETPATH and PHREEQC modeling is in agreement with lithology and facies changes previously observed in the Kurnub Group sequence.

Applied Geochemistry↗
USGS2026

Geochronologic data reveal Late Pleistocene to Holocene debris-flow history and wildfire association within Whiskeytown National Recreation Area, Klamath Mountains, northern California

Understanding the local to regional history of extreme events such as debris flows and floods provides context to plan for and mitigate these hazards to life, property, and infrastructure. The Klamath Mountains of northwestern California have experienced both debris flows and devastating wildfires. Whiskeytown National Recreation Area (WHIS) is at the heart of this range and has a wealth of debris flow–related landforms. Gaining an understanding of prehistoric flows and their relationship with fire or other potential triggers can help mitigate future problems. Optically stimulated luminescence and radiocarbon analyses from sediment and entrained organics in undisturbed facies, including beneath partially buried boulders, establishes a chronology of paleo-events in WHIS. The levee deposits indicate a repetition of debris flows during the latest Holocene, every 125–150 years, since 850 yr. Larger flows occurred, with a record elucidated from debris-flow deposits along Clear Creek, with Middle Holocene ages, ca. 2600 to 5500 yr, most of which have sufficient concentrations of charcoal to indicate origins as postfire debris flows. Deposits at higher elevations show events from the latest Pleistocene ca. 13,000 yr. This geochronology indicates that these are not singular events but are relatively common and inherent to the geomorphic processes shaping this landscape.

California↗
USGS2017

Late Cretaceous inoceramid bivalves of the Kuskokwim Basin, southwestern Alaska, and their implications for basin evolution

Upper Cretaceous rocks of the Kuskokwim Group are exposed in a large region of southwestern Alaska and are mainly composed of deformed turbidite deposits that contain few fossils other than inoceramid bivalves. This paper documents the taxonomy of the inoceramids in the Kuskokwim Group, develops an inoceramid biostratigraphy based on known ranges in other regions, and analyzes biogeographic patterns, paleoecology, and depositional history of the Kuskokwim Group. Most of the inoceramid bivalves present in the Kuskokwim Group are of Cenomanian and Turonian age, and an assemblage of species typical of late Turonian age rocks is particularly well developed. Only two localities appear to be as young as Santonian age. The following 16 species or subspecies are discussed and illustrated in detail: Birostrina tamurai Matsumoto and Noda, Inoceramus virgatus Schlüter, I. pennatulus Pergament, I. pictus minus Matsumoto, I. cf. I. yabei Nagao and Matsumoto, I. ? sp. aff. I. costatus Nagao and Matsumoto, I. hobetsensis Nagao and Matsumoto, I. longealatus Tröger, I. frechi Flegel, I. waltersdorfensis waltersdorfensis Andert, I. cf. I. waltersdorfensis hannovrensis Heinz, I. kuskokwimensis n. sp., Mytiloides cf. M. opalensis (Böse), M. teraokai (Matsumoto and Noda), M. cf. M. incertus (Jimbo), and Sphenoceramus naumanni (Yokoyama). In addition, a specimen with affinities to Mytiloides striatoconcentricus carpathicus (Simionescu) and a specimen that may belong to the I. (Cremnoceramus?) rotundatus–I. ( C .) erectus lineage are illustrated. Most of the taxa present in the Kuskokwim region are found in other regions of the North Pacific, particularly Japan and eastern Siberia, or are found throughout the Northern Hemisphere. Only one species, I. kuskokwimensis n. sp., is new and may be endemic. North Pacific taxa are predominant in the Kuskokwim region, but intervals near the Cenomanian–Turonian Stage boundary and in the upper Turonian contain taxa characteristic of Europe and the Western Interior basin of North America; some of these taxa have not been recorded previously in the North Pacific region. Turonian heteromorph ammonite assemblages associated with inoceramids in the finer grained facies of the Kuskokwim region are similar to those found in coeval rocks of Japan and Germany. The depositional area of the Kuskokwim Group can be broken into two northeast-trending subbasins, the Kuskokwim River subbasin to the northwest and the Mulchatna River subbasin to the southeast, connected by the Nushagak Hills corridor. Within the Kuskokwim River subbasin, deposition apparently started earlier in the north (middle Cenomanian) than in the south (late Cenomanian to early Turonian), and prograding deltaic sedimentation along the western margin also appears to have started earlier in the north. No marine fossils younger than latest Turonian to earliest Coniacian are known from the Kuskokwim River subbasin. The youngest fossils identified are Santonian in age and are from deep-water deposits in the Nushagak Hills corridor. Few fossils are known from the Mulchatna River subbasin and age control is limited.

Journal of Paleontology↗
USGS2002

An unusual occurrence of arsenic-bearing pyrite in the Upper Freeport coal bed, West-Central Pennsylvania

Scanning electron microscopy and electron microprobe analysis were used to identify a rare type of As-bearing pyrite in selected specific gravity separates from the Pennsylvanian age Upper Freeport coal bed, west-central Pennsylvania. Arsenic was detected mainly in cell-wall replacement pyrite where concentrations ranged from nondetectable to 1.9 wt %. Although the majority of arsenic-bearing pyrite in the Upper Freeport coal bed is concentrated in massive and late diagenetic pyrite morphologies, the rarer As-bearing cell-replacement pyrite was observed in both light and heavy gravity separates from the three coal facies examined. Arsenic was occasionally detected in cell-filling replacement pyrite, but this As appears to be an artifact produced by signals from underlying and/or adjacent As-bearing cell-wall replacement pyrite. It is postulated that some plants of the Upper Freeport paleoswamp may have biomethylated As, which later could have been converted to dimethylarsine or other volatile organoarsenic compounds by either biologically or chemically driven processes. Once liberated, the arsenic may have been incorporated into pyrite during pyritization of the cell walls. The As incorporation occurred early, before significant compaction of the peat, because the pyritized cell walls are not compacted.

Pennsylvania↗
USGS2000

Geochronology of the proterozoic basement of southwesternmost North America, and the origin and evolution of the Mojave crustal province

The Proterozoic Baldwin gneiss in the central Transverse Ranges of southern California, a part of the Mojave crustal province, is composed of quartzofeldspathic gneiss and schist, augen and granitic gneiss, trondhjemite gneiss, and minor quartzite, amphibolite, metagabbro, and metapyroxenite. Sensitive high resolution ion microprobe (SHRIMP) data indicate that augen and granitic gneisses comprise a magmatic arc intrusive suite emplaced between 1783 ± 12 and 1675 ± 19 Ma, adjacent to or through thinned Archean crust. High U/Th rims on zircons in most samples suggest an early metamorphic event at ∼1741 Ma, but peak amphibolite facies metamorphism and penetrative, west vergent deformation occurred after 1675 Ma. The Baldwin gneiss is part of a regional allochthon emplaced by west vergent deformation over a Proterozoic shelf-slope sequence (Joshua Tree terrane). We hypothesize that emplacement of this regional allochthon occurred during a late Early or Middle Proterozoic arc-continent collision along the western margin of Laurentia.

Tectonics↗
USGS2000

Dating of major normal fault systems using thermochronology: An example from the Raft River detachment, Basin and Range, western United States

Application of thermochronological techniques to major normal fault systems can resolve the timing of initiation and duration of extension, rates of motion on detachment faults, timing of ductile mylonite formation and passage of rocks through the crystal-plastic to brittle transition, and multiple events of extensional unroofing. Here we determine the above for the top-to-the-east Raft River detachment fault and shear zone by study of spatial gradients in 40 Ar/ 39 Ar and fission track cooling ages of footwall rocks and cooling histories and by comparison of cooling histories with deformation temperatures. Mica 40 Ar/ 39 Ar cooling ages indicate that extension-related cooling began at ∼25–20 Ma, and apatite fission track ages show that motion on the Raft River detachment proceeded until ∼7.4 Ma. Collective cooling curves show acceleration of cooling rates during extension, from 5–10°C/m.y. to rates in excess of 70–100°C/m.y. The apparent slip rate along the Raft River detachment, recorded in spatial gradients of apatite fission track ages, is 7 mm/yr between 13.5 and 7.4 Ma and is interpreted to record the rate of migration of a rolling hinge. Microstructural study of footwall mylonite indicates that deformation conditions were no higher than middle greenschist facies and that deformation occurred during cooling to cataclastic conditions. These data show that the shear zone and detachment fault represent a continuum produced by progressive exhumation and shearing during Miocene extension and preclude the possibility of a Mesozoic age for the ductile shear zone. Moderately rapid cooling in middle Eocene time likely records exhumation resulting from an older, oppositely rooted, extensional shear zone along the west side of the Grouse Creek, Raft River, and Albion Mountains.

Idaho, Utah↗
USGS2004

Driving mechanisms for >40 km of exhumation during contraction and extension in a continental arc, Cascades core, Washington

In the NW North American Cordillera, the Cascades core region of the Coast Plutonic Complex underwent Late Cretaceous (>96 Ma to locally 73 Ma) SW-NE contraction and crustal thickening followed by dextral transpression (???73 to 55 Ma), then transtension (<55 Ma). Exhumation occurred during all three phases. During contraction, slow exhumation (???0.6 mm/yr) occurred along the margins of the core, driven by isostatic rebound and erosion, and faster exhumation (>3 mm /yr) by local thrusting in regions undergoing crustal thickening. In the central part of the core (Chelan block), >40 km of exhumation occurred between 91 and 45 Ma, about half of which occurred during early contraction (driven by thrusting) and half during top-to-north, arc-oblique shear during reactivation of a midcrustal Cretaceous thrust, the Dinkelman decollement. The footwall of this thrust consists of the Swakane Biotite Gneiss, a Cretaceous, metaclastic assemblage with recorded pressures of 10-12 kbar, no arc-related magmatism, and structures dominated by pervasive top-to-north shearing. The hanging wall consists of the Napeequa Complex, an oceanic assemblage with recorded pressures of 6-12 kbar, voluminous arc-related magmatism, and complex structures indicating early top-to-WSW shearing, younger top-to-north shearing, and widespread folding. In the Napeequa, top-to-north shearing started by 73 Ma during melt-present conditions at pressures ???6 kbar. Top-to-north shearing in both hanging wall and footwall continued during exhumation (???1.6 mm/yr) and cooling to greenschist facies conditions during which slip became increasingly localized, eventually resulting in formation of pseudotachylite on discrete slip surfaces. We suggest that arc-oblique extension was driven by along-arc heterogeneity in displacements/ erosion, initially during transpression and underplating of continental sediments, and later during transtension. Copyright 2004 by the American Geophysical Union.

Tectonics↗
USGS2009

Obtaining parsimonious hydraulic conductivity fields using head and transport observations: A Bayesian geostatistical parameter estimation approach

Flow path delineation is a valuable tool for interpreting the subsurface hydrogeochemical environment. Different types of data, such as groundwater flow and transport, inform different aspects of hydrogeologic parameter values (hydraulic conductivity in this case) which, in turn, determine flow paths. This work combines flow and transport information to estimate a unified set of hydrogeologic parameters using the Bayesian geostatistical inverse approach. Parameter flexibility is allowed by using a highly parameterized approach with the level of complexity informed by the data. Despite the effort to adhere to the ideal of minimal a priori structure imposed on the problem, extreme contrasts in parameters can result in the need to censor correlation across hydrostratigraphic bounding surfaces. These partitions segregate parameters into facies associations. With an iterative approach in which partitions are based on inspection of initial estimates, flow path interpretation is progressively refined through the inclusion of more types of data. Head observations, stable oxygen isotopes ( 18 O/ 16 O ratios), and tritium are all used to progressively refine flow path delineation on an isthmus between two lakes in the Trout Lake watershed, northern Wisconsin, United States. Despite allowing significant parameter freedom by estimating many distributed parameter values, a smooth field is obtained.

Water Resources Research↗
USGS2009

Links between fluid circulation, temperature, and metamorphism in subducting slabs

The location and timing of metamorphic reactions in subducting lithosph??re are influenced by thermal effects of fluid circulation in the ocean crust aquifer. Fluid circulation in subducting crust extracts heat from the Nankai subduction zone, causing the crust to pass through cooler metamorphic faci??s than if no fluid circulation occurs. This fluid circulation shifts the basalt-to-eclogite transition and the associated slab dehydration 14 km deeper (35 km farther landward) than would be predicted with no fluid flow. For most subduction zones, hydrothermal cooling of the subducting slab will delay eclogitization relative to estimates made without considering fluid circulation. Copyright 2009 by the American Geophysical Union.

Geophysical Research Letters↗
USGS2025

Paleo-scours within the layered sulfate-bearing unit at Gale crater, Mars: Evidence for intense wind erosion

The surface of modern Mars is largely shaped by wind, but the influence of past wind activity is less well constrained. Sedimentary rocks exposed in the lower foothills of Aeolis Mons, the central mound within Gale crater, record a transition from predominantly lacustrine deposition in the Murray formation to aeolian deposition in the Mirador formation. Here, we report a series of enigmatic decameter-wide, concave-up scour-and-fill structures within the Mirador formation and discuss their formation mechanisms. Using panoramic images of stratigraphy exposed in cliff faces acquired by the Curiosity rover, we map the extent, distribution and orientation of the scour-and-fill structures and document the sedimentary facies within and surrounding these structures. The scours are grouped into two classes: (A) scours with a simple, symmetric morphology and light-toned, draping infill; and (B) scours with lateral pinching and dark-toned infill. We find that the scour-enclosing environment is composed of planar, even-in-thickness laminations with a pin-stripe pattern which we interpret as wind-ripple strata formed within an aeolian sandsheet environment. Class B contains cm-scale cross-bedding and a wing-shaped feature making this scour-and-fill structure consistent with fluvial processes. We interpret scour fill of class A as an aeolian infill due to similarities with the surrounding sandsheet strata. The broad morphologies and distribution of class A are also consistent with the geometry of blowout structures formed by localized, enhanced wind deflation. These paleo-blowout structures occur clustered within the same stratigraphic interval, which may imply that they record an interval of intensified wind activity at Gale crater.

JGR Planets↗
USGS2010

Kinematic evidence for extensional unroofing of the Franciscan Complex along the Coast Range Fault, Northern Diablo Range, California

Franciscan metagraywacke immediately below the Del Puerto ophiolite, an outlier of the Coast Range ophiolite in the northern Diablo Range, was sheared during top‐to‐the‐east displacement on the Coast Range fault. This represents normal faulting and extensional offset. It was accompanied by attenuation of the Coast Range ophiolite and Great Valley sequence in the hanging wall along layer‐parallel normal faults that sole into the Coast Range fault. Extension occurred as the Franciscan Complex moved relatively west, out from under North American lithosphere and across the subducting ocean plate below. This effected a lengthening and thinning in the wedge of material above the down‐going plate, presumably in response to instability brought about by subduction shallowing (Krueger and Jones, 1989) and accretion of the Franciscan Central belt in the latest Cretaceous to early Paleocene. As a result, blueschist facies terranes of the uppermost part of the Franciscan Complex are now juxtaposed directly against hanging wall units that bear only low‐grade metamorphism.

Tectonics↗