Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Energy Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
USGS1999

Formation of natural gas hydrates in marine sediments 1. Conceptual model of gas hydrate growth conditioned by host sediment properties

The stability of submarine gas hydrates is largely dictated by pressure and temperature, gas composition, and pore water salinity. However, the physical properties and surface chemistry of deep marine sediments may also affect the thermodynamic state, growth kinetics, spatial distributions, and growth forms of clathrates. Our conceptual model presumes that gas hydrate behaves in a way analogous to ice in a freezing soil. Hydrate growth is inhibited within fine-grained sediments by a combination of reduced pore water activity in the vicinity of hydrophilic mineral surfaces, and the excess internal energy of small crystals confined in pores. The excess energy can be thought of as a "capillary pressure" in the hydrate crystal, related to the pore size distribution and the state of stress in the sediment framework. The base of gas hydrate stability in a sequence of fine sediments is predicted by our model to occur at a lower temperature (nearer to the seabed) than would be calculated from bulk thermodynamic equilibrium. Capillary effects or a build up of salt in the system can expand the phase boundary between hydrate and free gas into a divariant field extending over a finite depth range dictated by total methane content and pore-size distribution. Hysteresis between the temperatures of crystallization and dissociation of the clathrate is also predicted. Growth forms commonly observed in hydrate samples recovered from marine sediments (nodules, and lenses in muds; cements in sands) can largely be explained by capillary effects, but kinetics of nucleation and growth are also important. The formation of concentrated gas hydrates in a partially closed system with respect to material transport, or where gas can flush through the system, may lead to water depletion in the host sediment. This "freeze-drying" may be detectable through physical changes to the sediment (low water content and overconsolidation) and/or chemical anomalies in the pore waters and metastable presence of free gas within the normal zone of hydrate stability.

Journal of Geophysical Research B: Solid Earth↗
USGS2010

Inelastic off-fault response and three-dimensional dynamics of earthquake rupture on a strike-slip fault

Large dynamic stress off the fault incurs an inelastic response and energy loss, which contributes to the fracture energy, limiting the rupture and slip velocity. Using an explicit finite element method, we model three-dimensional dynamic ruptures on a vertical strike-slip fault in a homogeneous half-space. The material is subjected to a pressure-dependent Drucker-Prager yield criterion. Initial stresses in the medium increase linearly with depth. Our simulations show that the inelastic response is confined narrowly to the fault at depth. There the inelastic strain is induced by large dynamic stresses associated with the rupture front that overcome the effect of the high confining pressure. The inelastic zone increases in size as it nears the surface. For material with low cohesion (~5 MPa) the inelastic zone broadens dramatically near the surface, forming a "flowerlike" structure. The near-surface inelastic strain occurs in both the extensional and the compressional regimes of the fault, induced by seismic waves ahead of the rupture front under a low confining pressure. When cohesion is large (~10 MPa), the inelastic strain is significantly reduced near the surface and confined mostly to depth. Cohesion, however, affects the inelastic zone at depth less significantly. The induced shear microcracks show diverse orientations near the surface, owing to the low confining pressure, but exhibit mostly horizontal slip at depth. The inferred rupture-induced anisotropy at depth has the fast wave direction along the direction of the maximum compressive stress.

Journal of Geophysical Research B: Solid Earth↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS2021

Effect of an algal amendment on the microbial conversion of coal to methane at different sulfate concentrations from the Powder River Basin, USA

Biogenic methane is estimated to account for one-fifth of the natural gas worldwide and there is great interest in controlling methane from different sources. Biogenic coalbed methane (CBM) production relies on syntrophic associations between fermentative bacteria and methanogenic archaea to anaerobically degrade recalcitrant coal and produce methanogenic substrates. However, very little is known about how differences in geochemistry, hydrology, and microbial community composition influence subsurface carbon utilization and CBM production. The addition of an amendment consisting of microalgal biomass has previously been shown to increase CBM production while providing the possibility of a closed-loop fossil system where waste (production water) is used to grow algae to ultimately produce energy (methane). However, the efficiency of enhancing CBM production under different redox conditions remains unresolved. In this study, we focused on the U.S. Geological Survey's Birney test site (Montana, USA) that has nine wells vertically accessing four coal seams with varying geochemistry (low and high sulfate (SO 4 2− )) and methane production rates. We used organic matter (OM) in the form of algal biomass to discern the effect of this amendment on OM degradation and microbially enhanced CBM production potential under different geochemical constraints. We tracked changes in community composition, OM composition, organic carbon (OC) concentration, methane production, and nutrients in batch systems over six months. Methane production was detected only in microcosms from low SO 4 2− wells (168 to 800 μg methane per gram of coal). The OC consumption varied across time for all wells and the variation was greatest for the low SO 4 2− wells. Different groups of syntrophic bacteria were associated with net‑carbon consuming microcosms, and specifically Syntrophorhabdus was identified with several different statistical methods as a potentially important coal degrader. Results from this study provide insight into potential coal-degraders, the compositional changes in some of the different OM fractions, and trends in carbon consumption related to methane production across coal seams along the vertical SO 4 2− gradient.

Montana, Wyoming↗
USGS1999

Climatic impact of glacial cycle polar motion: Coupled oscillations of ice sheet mass and rotation pole position

Precessional motion of Earth's rotation axis relative to its orbit is a well-known source of long-period climatic variation. It is less well appreciated that growth and decay of polar ice sheets perturb the symmetry of the global mass distribution enough that the geographic location of the rotation axis will change by at least 15 km and possibly as much as 100 km during a single glacial cycle. This motion of the pole will change the seasonal and latitudinal pattern of temperatures. We present calculations, based on a diurnal average energy balance, which compare the summer and winter temperature anomalies due to a 1° decrease in obliquity with those due to a 1° motion of the rotation pole toward Hudson Bay. Both effects result in peak temperature perturbations of about 1° Celsius. The obliquity change primarily influences the amplitude of the seasonal cycle, while the polar motion primarily changes the annual mean temperatures. The polar motion induced temperature anomaly is such that it will act as a powerful negative feedback on ice sheet growth. We also explore the evolution of the coupled system composed of ice sheet mass and pole position. Oscillatory solutions result from the conflicting constraints of rotational and thermal stability. A positive mass anomaly on an otherwise featureless Earth is in rotational equilibrium only at the poles or the equator. The two polar equilibria are rotationally unstable, and the equatorial equilibrium, though rotationally stable, is thermally unstable. We find that with a plausible choice for the strength of coupling between the thermal and rotational systems, relatively modest external forcing can produce significant response at periods of 10 4 –10 6 years, but it strongly attenuates polar motion at longer periods. We suggest that these coupled oscillations may contribute to the observed dominance of 100 kyr glacial cycles since the mid-Pleistocene and will tend to stabilize geographic patterns that are suitable to glaciations.

Journal of Geophysical Research B: Solid Earth↗
USGS1987

Hydraulics and basin morphometry of the largest flash floods in the conterminous United States

The maximum rainfall-runoff floods measured by indirect methods in small basins (0.39-370 km 2 ) in the conterminous United States are examined. This analysis identified twelve floods that were the largest ever measured. These floods all occurred in semiarid to arid areas. For eleven of the twelve largest rainfall-runoff floods measured in small basins by the slope-area method, values of hydraulic depth; hydraulic radius; width-depth ratio; n value; mean velocity; velocity-head coefficient; Froude number; water-surface, energy, and channel slopes; shear stress; and unit stream power are tabulated. Estimated composite n values weighted by subsection conveyance range from 0.028 to 0.048 with a mean of 0.038. Mean velocities ranged from 3.47 to 9.97 m s −1 . Froude numbers ranged from 0.81 to 2.49, with 9 of 12 floods having values greater than 1.00. Water-surface, energy, and channel slopes vary considerably for each flood. Energy slope always was less than water-surface slope by values of 1–104%. Channel slope was greater than energy slope in eight floods. Shear stresses ranged between 61 and 855 N m −2 , and unit stream power from 212 to 8131 w m −1 . Floods in these small basins produced shear stresses and unit stream powers several hundred times greater than floods in large rivers. Floods on other small streams, with smaller unit discharges, produced greater shear stresses and stream powers. This indicates that the force of a flood is controlled by the depth-slope product, not absolute discharge. In the twelve watersheds studied, basin relief ranged from 165 to 1280 m, elongation ratios ranged from 0.55 to 0.80, the number of first-order streams (basin magnitude) ranged from 10 to 4297, drainage density ranged from 4.1 to 10.9 km km −2 , basin slope ranged from 0.0043 to 0.2486, relief ratio ranged from 0.0097 to 0.34, ruggedness number ranged from 0.69 to 7.17, and first-order channel frequency ranged from 5.1 to 38.6 km −2 . Elongation ratios were larger, and drainage density and first-order channel frequency lower, than other small flash-flood prone basins in the United States. These twelve basins have neither the most favorable morphometric characteristics which contribute to flash-flood peaks, nor did the storms causing these flash floods have the greatest short-duration intensities. Maximum flood peaks originate from an optimal combination of basin morphology and physiography, and storm intensity.

conterminous United States↗
USGS2019

Estimating the pressure-limited dynamic capacity and costs of basin-scale CO2 storage in a Saline Formation

Deployment of carbon capture and storage (CCS) could be necessary to be able to satisfy baseload electricity demand, maintain diversity in the energy mix, and achieve mitigation of carbon dioxide (CO 2 ) emissions at lowest cost ( IPCC, 2015 ; U.S. DOE, 2016 ). If basin-, regional- or national-scale deployment of CCS is needed, it may be possible to store only a small fraction of the captured CO 2 in oil and natural gas reservoirs. The vast majority would likely have to be stored in saline formations. Pressure buildup as a result of injecting CO 2 into such reservoirs is expected to be an important source of risk associated with CO 2 storage, and could constrain dynamic storage capacities (maximum injection rates) to be far below estimates based on access to theoretical storage resources. Estimates of CO 2 storage costs based on an assumption of practical availability of the theoretical storage resource could lead to underestimation of the costs of CO 2 storage. In this study, simulation results suggest that the pressure-limited dynamic CO 2 storage capacity of the Mount Simon Sandstone could be less than 4% of the theoretical storage resource in this saline formation, and storage costs could be an order of magnitude higher than recent estimates. However, consideration of the geologic heterogeneity in this deep saline formation allowed definition of a high injectivity zone, and estimated costs of CO 2 storage in this “sweet spot” of the reservoir approached recent estimates that did not include costs for pressure management.

Illinois, Indiana, Kentucky↗
USGS2000

Stress resistance strategy in an arid land shrub: interactions between developmental instability and fractal dimention

This paper investigates allocation of energy to mechanisms that generate and preserve architectural forms (i.e. developmental stability, complexity of branching patterns) and productivity (growth and reproduction) in response to environmental disturbances (i.e. grazing and resource availability). The statistical error in translational symmetry was used to detect random intra-individual variability during development. This can be thought of as a measure of developmental instability caused by stress. Additionally, we use changes in fractal complexity and shoot distribution of branch structures as an alternate indicator of stress. These methods were applied to Anthyllis cytisoides L., a semi-arid environment shrub, to ascertain the effect of grazing and slope exposure on developmental traits in a 2×2 factorial design. The results show that A. cytisoides maintains developmental stability at the expense of productivity. Anthyllis cytisoides was developmentally more stable when grazed and when on south-facing, as opposed to north-facing slopes. On the contrary, shoot length, leaf area, fractal dimension and reproductive-to-vegetative allocation ratio were larger in north- than in south-facing slopes. As a consequence, under extreme xeric conditions, shrub mortality increased in north-facing slopes, especially when not grazed. The removal of transpiring area and the reduction of plant competition favoured developmental stability and survival in grazed plants. Differences between grazed and ungrazed plants were most evident in more mesic (north-facing) areas.

Journal of Fish Diseases↗
USGS2014

Application of near-surface geophysics as part of a hydrologic study of a subsurface drip irrigation system along the Powder River floodplain near Arvada, Wyoming

Rapid development of coalbed natural gas (CBNG) production in the Powder River Basin (PRB) of Wyoming has occurred since 1997. National attention related to CBNG development has focused on produced water management, which is the single largest cost for on-shore domestic producers. Low-cost treatment technologies allow operators to reduce their disposal costs, provide treated water for beneficial use, and stimulate oil and gas production by small operators. Subsurface drip irrigation (SDI) systems are one potential treatment option that allows for increased CBNG production by providing a beneficial use for the produced water in farmland irrigation. Water management practices in the development of CBNG in Wyoming have been aided by integrated geophysical, geochemical, and hydrologic studies of both the disposal and utilization of water. The U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) and the U.S. Geological Survey (USGS) have utilized multi-frequency airborne, ground, and borehole electromagnetic (EM) and ground resistivity methods to characterize the near-surface hydrogeology in areas of produced water disposal. These surveys provide near-surface EM data that can be compared with results of previous surveys to monitor changes in soils and local hydrology over time as the produced water is discharged through SDI. The focus of this investigation is the Headgate Draw SDI site, situated adjacent to the Powder River near the confluence of a major tributary, Crazy Woman Creek, in Johnson County, Wyoming. The SDI system was installed during the summer of 2008 and began operation in October of 2008. Ground, borehole, and helicopter electromagnetic (HEM) conductivity surveys were conducted at the site prior to the installation of the SDI system. After the installation of the subsurface drip irrigation system, ground EM surveys have been performed quarterly (weather permitting). The geophysical surveys map the heterogeneity of the near-surface geology and hydrology of the study area. The geophysical data are consistent between surveys using different techniques and between surveys carried out at different times from 2007 through 2011. This paper summarizes geophysical results from the 4-year monitoring study of the SDI system.

Wyoming↗
USGS2005

Nearshore wave-induced cyclical flexing of sea cliffs

[1] Evolution of a tectonically active coast is driven by geomorphically destructive energy supplied by ocean waves. Wave energy is episodic and concentrated; sea cliffs are battered by the geomorphic wrecking ball every 4-25 s. We measure the response of sea cliffs to wave assault by sensing the ground motion using near-coastal seismometers. Sea cliffs respond to waves in two distinct styles. High-frequency motion (20 Hz) reflects the natural frequency of the sea cliff as it rings in response to direct wave impact. Low-frequency motion in the 0.1-0.05 Hz (10-20 s) band consistently agrees with the dominant nearshore wave period. Integrating microseismic velocities suggests 50 ??m and 10 ??m displacements in horizontal and vertical directions, respectively. Displacement ellipsoids exhibit simultaneous downward and seaward sea cliff motion with each wave. Video footage corroborates the downward sea cliff flex in response to the imposed water load on the wave cut platform. Gradients in displacement amplitudes documented using multiple seismometers suggest longitudinal and shear strain of the flexing sea cliff on the order of 0.5-4 ?? strains during each wave loading cycle. As this sea cliff flexure occurs approximately 3 million times annually, it has the potential to fatigue the rock through cyclical loading. Local sea cliff retreat rates of 10 cm/yr imply that a given parcel of rock is flexed through roughly 109 cycles of increasing amplitude before exposure to direct wave attack at the cliff face. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2023

Effect of feeding history on metabolic rate of largemouth bass (Micropterus nigricans): implications for bioenergetics models

Metabolic rate is a key parameter in fish energy budgets that strongly influences the output of bioenergetics models. In this study, we tested the hypothesis that metabolic rate varies with growth history of age-1 largemouth bass Micropterus nigricans Cuvier, 1828. Two groups of fish were fed alternating maintenance or ad libitum rations of fathead minnow Pimephales promelas Rafinesque, 1820, so that over a 9-week period, initial and ending size of fish was similar. After 9 weeks, oxygen consumption was measured using static, closed respirometry. Although final body weight was similar between the two groups (means, 104–108 g), specific oxygen consumption for fish fed maintenance rations (0.094 mg O 2 g −2 h −1 ) was 38% less than that measured for fish fed ad libitum (0.152 mg O 2 g −2 h −1 ). Bioenergetics estimates of food consumption were similar to observed values for fish fed ad libitum (∼7% error), but for fish fed maintenance rations, the model overestimated food consumption by 65%. By accounting for changes in metabolic rate owing to reduced feeding, error in model estimates of food consumption was reduced. These findings shed new insight into factors associated with consumption-dependent error in bioenergetics models and highlight the importance of feeding history on metabolic rate of fish. Incorporating growth-dependent metabolism into bioenergetics models can improve model accuracy and allow fisheries biologists to make more informed decisions regarding fish growth and energetics.

Canadian Journal of Zoology↗
USGS1984

Resin rodlets in shale and coal (Lower Cretaceous), Baltimore Canyon Trough

Rodlets, occurring in shale and coal (uppermost Berriasian to middle Aptian, Lower Cretaceous), were identified from drill cuttings taken from depths between 9330 ft (2844 m) and 11, 460 ft (3493 m) in the Texaco et al., Federal Block 598, No. 2 well, in the Baltimore Canyon Trough. Under the binocular microscope, most of the rodlets appear black, but a few are reddish brown, or brownish and translucent on thin edges. They range in diameter from about 0.4 to 1.7 mm and are commonly flattened. The rodlets break with a conchoidal fracture, and some show an apparent cellular cast on their longitudinal surfaces. When polished and viewed in reflected light, the rodlets appear dark gray and have an average random reflectance of less than 0.1% whereas mean maximum reflectances are 0.48–0.55% for vitrinite in the associated shale and coal. These vitrinite reflectances indicate either subbituminous A or high-volatile C bituminous coal. The rodlets fluoresce dull gray yellow to dull yellow. The scanning electron microscope (SEM) and light microscope reveal the presence of swirl-like features in the rodlet interiors. Minerals associated with the rodlets occur as sand-size grains attached to the outer surface, as finely disseminated interior grains, and as fracture fillings. Electron microprobe and SEM-energy-dispersive X-ray (EDX) anlayses indicate that the minerals are dominantly clays (probably illite and chlorite) and iron disulfide; calcium carbonate, silicon dioxide, potassium aluminum silicate (feldspar), titanium dioxide, zinc sulfide, and iron sulfate minerals have been also identified. The rodlets were analyzed directly for C, H, N, O, and total S and are interpreted as true resins on the basis of C and H contents that range from 75.6 to 80.3 and from 7.4 to 8.7 wt. % (dry, ash-free basis), respectively. Elemental and infrared data support a composition similar to that of resinite from bituminous coal. Elements determined to be organically associated in the rodlets include S (0.2–0.5 wt.%), Cl (0.03–0.1 wt.%), and Si (0.05–0.08 wt.%). The ash content of the resin rodlets ranges from 4 to 24 wt.% and averages 12 wt.%. Total sulfur contents range from 1.7 to 3.6 wt.%. Resins of fossil plants are known to have little or no sulfur and ash; therefore, these data and the presence of minerals in fractures indicate that most of the sulfur and mineral matter were introduced into the resin partly or wholly after the time of brittle fracture of the resin. The probable source of the resin rodlets is fossil pinaceous conifer cones, which are known to have resin canals as much as 2400 μm in diameter.

International Journal of Coal Geology↗
USGS2014

Lipid and moisture content modeling of amphidromous Dolly Varden using bioelectrical impedance analysis

The physiological well-being or condition of fish is most commonly estimated from aspects of individual morphology. However, these metrics may be only weakly correlated with nutritional reserves stored as lipid, the primary form of accumulated energy in fish. We constructed and evaluated bioelectrical impedance analysis (BIA) models as an alternative method of assessing condition in amphidromous Dolly Varden Salvelinus malma collected from nearshore estuarine and lotic habitats of the Alaskan Arctic. Data on electrical resistance and reactance were collected from the lateral and ventral surfaces of 192 fish, and whole-body percent lipid and moisture content were determined using standard laboratory methods. Significant inverse relationships between temperature and resistance and reactance prompted the standardization of these data to a constant temperature using corrective equations developed herein. No significant differences in resistance or reactance were detected among spawning and nonspawning females after accounting for covariates, suggesting that electrical pathways do not intersect the gonads. Best-fit BIA models incorporating electrical variables calculated from the lateral and ventral surfaces produced the strongest associations between observed and model-predicted estimates of proximate content. These models explained between 6% and 20% more of the variability in laboratory-derived estimates of proximate content than models developed from single-surface BIA data and 32% more than models containing only length and weight data. While additional research is required to address the potential effects of methodological variation, bioelectrical impedance analysis shows promise as a way to provide high-quality, minimally invasive estimates of Dolly Varden lipid or moisture content in the field with only small increases in handling time.

Alaska↗
USGS2021

A review of spatially resolved techniques and applications of organic petrography in shale petroleum systems

This review examines new techniques and applications of organic petrography in source-rock reservoir petroleum systems that have occurred along with development of the global ‘shale revolution’ in energy resources. The review is limited to techniques and instrumentation that provide spatially resolved information, typically at or below microscales, for dispersed organic matter occurring in situ in samples of shale and mudrock. A brief summary of ion beam sample preparation is followed by discussion of the most common analytical techniques and applications. Advantages and limitations of each technique, including requisite sample preparation, types of information generated [e.g., molecular or elemental (isotopic) abundance], sensitivity, and resolution are discussed. In a few cases, techniques not yet applied to organic petrology of shale or mudrock are described (e.g., X-ray photoelectron spectroscopy imaging), in anticipation of near-term future application. The most common in situ techniques applied for characterization of organic matter in shale and mudrock include optical (including fluorescence) and electron microscopies, Raman, fluorescence, and infrared spectroscopies, and surficial measurements via force microscopy. Techniques that show growing application to organic petrography of shale include tip-enhanced photothermal infrared spectroscopy, mass spectrometry imaging, and synchrotron-based spectroscopies, among others. It is anticipated that the future of dispersed organic matter petrography will hold continued development of integrated instrument techniques (e.g., simultaneous or sequential correlative microscopies and/or spectroscopies of the same location), increased instrumental resolution, increased use of multiscale and multimodal organic petrography investigations, and three-dimensional imaging and chemical speciation mapping applications via multiple analytical approaches.

International Journal of Coal Geology↗
USGS1994

The influence of ice on southern Lake Michigan coastal erosion

Coastal ice does not protect the coast but enhances erosion by displacing severe winter wave energy from the beach to the shoreface and by entraining and transporting sediment alongshore and offshore. Three aspects of winter ice in Lake Michigan were studied over a 3-year period and found to have an important influence on coastal sediment dynamics and the coastal sediment budget: (1) the influence of coastal ice on shoreface morphology, (2) the transport of littoral sediments by ice, and (3) the formation of anchor and underwater ice as a frequent and important event entraining and transporting sediment. Coastal lake ice includes a belt of mobile brash (ice blocks) and slush and a dynamic nearshore ice complex consisting of an icefoot, a lakeward sequence of wave-generated ice ridges, and intervening ice lagoons. Our studies indicate that the nearshore ice complex contains a sediment load (0.2 - 1.2 t/m of coast) that is roughly equivalent to the average amount of sand eroded from the coastal bluffs and to the amount sand ice-rafted offshore to the deep lake basin each year. Up to 0.28 t/m of coast can be entrained by ice in a single anchor-ice event, and separate events occurred on 15 days in January 1991. The brash/slush belt is the most important system component responsible for ice-induced sediment transport. Estimates of longshore ice drift, ice volume, and ice-borne sediment load suggest that 0.36 to 4.14 × 10 3 t/d are transported alongshore.

Journal of Great Lakes Research↗
USGS2013

Reevaluation of lake trout and lake whitefish bioenergetics models

Using a corrected algorithm for balancing the energy budget, we reevaluated the Wisconsin bioenergetics model for lake trout (Salvelinus namaycush) in the laboratory and for lake whitefish (Coregonus clupeaformis) in the laboratory and in the field. For lake trout, results showed that the bioenergetics model slightly overestimated food consumption by the lake trout when they were fed low and intermediate rations, whereas the model predicted food consumption by lake trout fed ad libitum without any detectable bias. The slight bias in model predictions for lake trout on restricted rations may have been an artifact of the feeding schedule for these fish, and we would therefore recommend application of the Wisconsin lake trout bioenergetics model to lake trout populations in the field without any revisions to the model. Use of the Wisconsin bioenergetics model for coregonids resulted in overestimation of food consumption by lake whitefish both in the laboratory and in the field by between 20 and 30%, on average. This overestimation of food consumption was most likely due to overestimation of respiration rate. We therefore adjusted the respiration component of the bioenergetics model to obtain a good fit to the observed consumption in our laboratory tanks. The adjusted model predicted the consumption in the laboratory and the field without any detectable bias. Until a detailed lake whitefish respiration study can be conducted, we recommend application of our adjusted version of the Wisconsin generalized coregonid bioenergetics model to lake whitefish populations in the field.

Journal of Great Lakes Research↗
USGS2002

Interactions among zebra mussel shells, invertebrate prey, and Eurasian ruffe or yellow perch

The exotic zebra mussel, Dreissena polymorpha , is established in all of the Laurentian Great Lakes and may affect benthivorous fishes by increasing the complexity of benthic substrates and changing energy flow patterns within the food web. Native yellow perch, Perca flavescens , and the nonindigenous Eurasian ruffe, Gymnocephalus cernuus , are benthivores that may compete for limited food resources. As ruffe spread to areas with more dense zebra mussel populations, the zone of interaction among zebra mussels, yellow perch, and ruffe will increase and intensify. In the laboratory, the effect of zebra mussel shells on the ability of these fishes to forage on amphipods ( Gammarus pseudolimnaeus ) and chironomids ( Chironomus plumosus ) was examined in light and darkness. In 12 h, ruffe consumed more amphipods than did similar-sized yellow perch, particularly in darkness on bare cobble, and in light within zebra mussels. Amphipods decreased activity more in the presence of ruffe than yellow perch. More amphipods were found in zebra mussel shells than in bare cobble, whether or not fish were present. In darkness, when ruffe consumed more amphipods on bare cobble, amphipods became more associated with zebra mussel shells. Although ruffe consumed more amphipods than yellow perch, perch consumed more chironomids than ruffe on bare cobble. The presence of zebra mussel shells altered the relative consumption of invertebrates in some substrate-light combinations. Experiments such as these help to improve understanding of the direct and indirect effects of predation between and among native and nonindigenous species that may exert structuring forces on the nearshore communities of the Great Lakes currently or in the future.

Journal of Great Lakes Research↗
USGS1996

Taxonomic structure and productivity of phytoplankton assemblages in Crater Lake, Oregon

Interactions among physical, chemical, and biological components and processes in Crater Lake result in a complex and dynamic ecosystem. In winter and spring, wind energy mixes the lake to a depth of about 200 m. During this period, episodic sinking of cold water below the depth of 200 m produces an upwelling of nutrient-rich water from the deep lake, a process that has a strong influence on the concentrations of nutrients available to phytoplankton in the euphotic zone. Patterns of upwelling are variable from year to year, and physical data indicate that water from the deep lake is completely mixed with surface water every 1–4 years. Phytoplankton cell biovolume and total chlorophyll are distributed uniformly to the depth of 200 m in winter and spring, at which time maximum rates of primary production occur in the upper 60 m of the water column. The onset of thermal stratification in July is associated with development of a chlorophyll maximum at depths between 100 and 140 m and a downward shift of the primary production maximum to depths between 60 and 100 m. Thermal stratification also is accompanied by a stratified distribution of phytoplankton populations that is characterized by assemblages with low species diversity and high dominance in the epilimnion and assemblages with higher diversity and lower dominance in the metalimnion and upper hypolimnion. Therefore, the thermal properties of the upper 200 m of Crater Lake, and associated changes in light and nutrients with increasing depth, are closely related to structural and functional attributes of phytoplankton assemblages in the water column.

Journal of Lake and Reservoir Management↗