Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Pennsylvania Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Ground-water vulnerability to nitrate contamination at multiple thresholds in the mid-Atlantic region using spatial probability models

The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency?s Regional Vulnerability Assessment Program, has developed a set of statistical tools to support regional-scale, ground-water quality and vulnerability assessments. The Regional Vulnerability Assessment Program?s goals are to develop and demonstrate approaches to comprehensive, regional-scale assessments that effectively inform managers and decision-makers as to the magnitude, extent, distribution, and uncertainty of current and anticipated environmental risks. The U.S. Geological Survey is developing and exploring the use of statistical probability models to characterize the relation between ground-water quality and geographic factors in the Mid-Atlantic Region. Available water-quality data obtained from U.S. Geological Survey National Water-Quality Assessment Program studies conducted in the Mid-Atlantic Region were used in association with geographic data (land cover, geology, soils, and others) to develop logistic-regression equations that use explanatory variables to predict the presence of a selected water-quality parameter exceeding a specified management concentration threshold. The resulting logistic-regression equations were transformed to determine the probability, P(X), of a water-quality parameter exceeding a specified management threshold. Additional statistical procedures modified by the U.S. Geological Survey were used to compare the observed values to model-predicted values at each sample point. In addition, procedures to evaluate the confidence of the model predictions and estimate the uncertainty of the probability value were developed and applied. The resulting logistic-regression models were applied to the Mid-Atlantic Region to predict the spatial probability of nitrate concentrations exceeding specified management thresholds. These thresholds are usually set or established by regulators or managers at National or local levels. At management thresholds of 1 milligram per liter and 3 milligrams per liter as nitrogen, the probability of nitrate concentrations exceeding these levels is greater than 50 percent (0.50) throughout much of the Mid-Atlantic Region. This includes extensive areas throughout central Maryland, southeastern Pennsylvania, northwestern Pennsylvania, and the Delmarva Peninsula. In addition, extensive areas in North Carolina and Virginia also have high probabilities of nitrate concentrations in ground water exceeding management thresholds of 1 milligram per liter and 3 milligrams per liter. The mapped areas showing a high predicted probability of nitrate concentrations in ground water exceeding 1 milligram per liter and 3 milligrams per liter correspond to areas that are mapped as cultivated land cover and/or overlying carbonate rocks. At a management threshold of 10 milligrams per liter (corresponding to the U.S. Environmental Protection Agency standard for nitrate in drinking water of 10 milligrams per liter), the predicted probability of nitrate concentrations in ground water exceeding this level is low for most of the Mid-Atlantic Region, except for the Delmarva Peninsula, southeastern Pennsylvania, and areas mapped as carbonate rocks in Virginia, Maryland, and Pennsylvania.

Scientific Investigations Report↗

Late Neoproterozoic felsite (602.3 +/- 2 Ma) and associated metadiabase dikes in the Reading Prong, Pennsylvania, and rifting of Laurentia

Felsite dikes in the Rittenhouse Gap iron mine district of the Reading Prong, eastern Pennsylvania, have a close geochemical affinity with the peralkaline Battle Mountain Member of the Robertson River Igneous Suite (RRIS), northern Virginia. These newly recognized Rittenhouse Gap Felsite dikes of the Swabia Creek Igneous Suite (SCIS) of eastern Pennsylvania plot as within-plate, A-type, A1 granites on various discriminant diagrams, but are quite distinct from late Neoproterozoic Catoctin Metarhyolite of Pennsylvania which has lower Ga/Al and Nb, but higher Eu. Newly recognized metadiabase dikes, also found in the Rittenhouse Gap district and proposed as Tunnel Mine Metadiabase of the SCIS, classify as alkali within-plate or continental initial rifting alkali tholeiites. They are quite distinct chemically and mineralogically from Catoctin Metabasalt flows and equivalent metadiabase dikes in Pennsylvania, which have lower Nb. Sr and Nd isotopic data indicate that the Tunnel Mine Metadiabase and Rittenhouse Gap Felsite are of mantle origin, but that the latter also includes a crustal component. The SCIS bimodal volcanics in Pennsylvania suggest a previously unrecognized rift environment in Pennsylvania at 602 Ma, somewhat predating the recognized, latest Neoproterozoic Catoctin event in Pennsylvania. As such, they fill in both temporal and geographic gaps for the rifting of Laurentia in Pennsylvania. It is proposed that the SCIS melt developed from a remnant ember of the northeastward trace of the older Mount Rogers-RRIS hotspot as Laurentia rotated clockwise. However, release and intrusion of the SCIS may have been related to younger Catoctin event crustal thinning that slightly predated the mafic dike phase of the Catoctin as Laurentia later migrated northward over a second hotspot. Eventually, the mafic phase associated with this second hotspot sufficiently attenuated the crust to allow introduction of Catoctin volcanics.

Northeastern Geology and Environmental Sciences↗

Brannerite from the Penn Haven Junction uranium occurrence, Carbon County, Pennsylvania

Thorium-free brannerite has been identified in Upper Devonian uraniferous sandstone from Penn Haven Junction, Carbon County, Pa. The brannerite was located by a variation of the "Lexan" technique and is associated with galena, uraninite, and clausthalite. The angular thorium-free nature of the brannerite suggests that it formed by metamorphism of uranium-saturated leucoxene. As a result of the metamorphism some uranium may be in less soluble minerals than those found in the uranium deposits of the Western United States. For this reason, in-place leaching of the uranium may be impractical.

Pennsylvania↗

Groundwater quality for 75 domestic wells in Lycoming County, Pennsylvania, 2014

Groundwater is a major source of drinking water in Lycoming County and adjacent counties in north-central and northeastern Pennsylvania, which are largely forested and rural and are currently undergoing development for hydrocarbon gases. Water-quality data are needed for assessing the natural characteristics of the groundwater resource and the potential effects from energy and mineral extraction, timber harvesting, agriculture, sewage and septic systems, and other human influences. This report, prepared in cooperation with Lycoming County, presents analytical data for groundwater samples from 75 domestic wells sampled throughout Lycoming County in June, July, and August 2014. The samples were collected using existing pumps and plumbing prior to any treatment and analyzed for physical and chemical characteristics, including nutrients, major ions, metals and trace elements, volatile organic compounds, gross-alpha particle and gross beta-particle activity, uranium, and dissolved gases, including methane and radon-222. Results indicate groundwater quality generally met most drinking-water standards, but that some samples exceeded primary or secondary maximum contaminant levels (MCLs) for arsenic, iron, manganese, total dissolved solids (TDS), chloride, pH, bacteria, or radon-222. Arsenic concentrations were higher than the MCL of 10 micrograms per liter (µg/L) in 9 of the 75 (12 percent) well-water samples, with concentrations as high as 23.6 μg/L; arsenic concentrations were higher than the health advisory level (HAL) of 2 μg/L in 23 samples (31 percent). Total iron concentrations exceeded the secondary maximum contaminant level (SMCL) of 300 μg/L in 20 of the 75 samples. Total manganese concentrations exceeded the SMCL of 50 μg/L in 20 samples and the HAL of 300 μg/L in 2 of those samples. Three samples had chloride concentrations that exceeded the SMCL of 250 milligrams per liter (mg/L); two of those samples exceeded the SMCL of 500 mg/L for TDS. The pH ranged from 5.3 to 9.15 and did not meet the SMCL range of 6.5 to 8.5 in 22 samples, with 17 samples having a pH less than 6.5 and 8 samples having pH greater than 8.5. Generally, the samples that had elevated TDS, chloride, or arsenic concentrations had high pH. Total coliform bacteria were detected in 39 of 75 samples (52 percent), with Escherichia coli detected in 10 of those 39 samples. Radon-222 activities ranged from non-detect to 7,420 picocuries per liter (pCi/L), with a median of 863 pCi/L, and exceeded the proposed drinking-water standard of 300 pCi/L in 50 (67 percent) of the 75 samples; radon-222 activities were higher than the alternative proposed standard of 4,000 pCi/L in 3 samples. Water from 15 of 75 (20 percent) wells had concentrations of methane greater than the reporting level of 0.01 mg/L; detectable methane concentrations ranged from 0.04 to 16.8 mg/L. Two samples had methane concentrations (13.1 and 16.8 mg/L) exceeding the action level of 7 mg/L. Low levels of ethane (up to 0.12 mg/L) were present in the five samples with the highest methane concentrations (near or above 1 mg/L) that were analyzed for hydrocarbon compounds and isotopic composition. The isotopic composition of methane in four of these groundwater samples, from the Catskill and Lock Haven Formations and the Hamilton Group, have sample carbon isotopic ratio delta values (carbon-13/carbon-12) ranging from –42.36 to –36.08 parts per thousand (‰) and hydrogen isotopic ratio delta values (deuterium/protium) ranging from –212.0 to –188.4 ‰, which are consistent with the isotopic compositions reported for mud-gas logging samples from these geologic units and a thermogenic source of the methane. However, the isotopic composition and ratios of methane to ethane in a fifth sample indicate the methane in that sample may be of microbial origin that subsequently underwent oxidation. The fifth sample had the highest concentration of methane, 16.8 mg/L, with an carbon isotopic ratio delta values of -50.59 ‰ and a hydrogen isotopic ratio delta values of -209.7 ‰. The six well-water samples with the highest methane concentrations also had among the highest pH values (8.25 to 9.15) and elevated concentrations of sodium, lithium, boron, fluoride, arsenic, and bromide. Relatively elevated concentrations of some other constituents, such as barium, strontium, and chloride, commonly were present in, but not limited to, those well-water samples with elevated methane. Three of the six groundwater samples with the highest methane concentrations had chloride/bromide ratios that indicate mixing with a small amount of brine (0.02 percent or less) similar in composition to those reported at undetermined depth below the freshwater aquifer and for gas and oil well brines in Pennsylvania. The sample with the highest methane concentration and most other samples with low methane concentrations (less than about 1 mg/L) have chloride/bromide ratios that indicate predominantly anthropogenic sources of chloride, such as road-deicing salt, septic systems, and (or) animal waste. Brines that are naturally present may originate from deeper parts of the aquifer system, while anthropogenic sources are more likely to affect shallow groundwater because they occur on or near the land-surface. The spatial distribution of groundwater compositions generally indicate that (1) uplands along the western border of Lycoming County usually have dilute, slightly acidic oxygenated, calcium-bicarbonate type waters; (2) intermediate altitudes or areas of carbonate bedrock usually have water of near neutral pH, with highest amounts of hardness (calcium and magnesium); (3) stream valleys, low elevations where groundwater may be discharging, and deep wells in uplands usually have water with pH values greater than 8 and highest arsenic, sodium, lithium, bromide concentrations. Geochemical modeling indicated that for samples with elevated pH, sodium, lithium, bromide, and alkalinity, the water chemistry could have resulted by dissolution of calcite (calcium carbonate) combined with cation-exchange and mixing with a small amount of brine. Through cation-exchange reactions between water and bedrock, which are equivalent to processes in a water softener, calcium ions released by calcite dissolution are exchanged for sodium ions on clay minerals. Thus, the assessment of groundwater quality in Lycoming County indicates groundwater is generally of good quality, but various parts of Lycoming County can have groundwater with low to moderate concentrations of methane and other constituents that appear in naturally present brine and produced waters from gas and oil wells at high concentrations."

Pennsylvania↗

Johnstown folio, Pennsylvania

By reference to the key map (fig. 1) it will be seen that the Johnstown quadrangle is in southwest-central Pennsylvania. It lies mostly in Cambria County but covers also small parts of Somerset, Westrmoreland, and Indiana counties. Most of it is included in the valley of Conemaugh River and its tributaries Little Conemaugh River and Stony Creek, at the confluence of which is Johnstown and its suburbs. The northern part of the area is in the valleys of Blacklick Creek and it South Branch, along which are the small but prosperous coal-mining town Nanty Glo, Twin Rocks, Weber, Vintondale, and Wehrum.

Pennsylvania↗

Hydrogeology and ground-water flow in the carbonate rocks of the Little Lehigh Creek basin, Lehigh County, Pennsylvania

The Little Lehigh Creek basin is underlain mainly by a complex assemblage of highly-deformed Cambrian and Ordovician carbonate rocks. The Leithsville Formation, Allentown Dolomite, Beekmantown Group, and Jacksonburg Limestone act as a single hydrologic unit. Ground water moves through fractures and other secondary openings and generally is under water-table conditions. Median annual ground-water discharge (base flow) to Little Lehigh Creek near Allentown (station 01451500) during 1946-86 was 12.97 inches or 82 percent of streamflow. Average annual recharge for 1975-83 was 21.75 inches. Groundwater and surface-water divides do not coincide in the basin. Ground-water underflow from the Little Lehigh Creek basin to the Cedar Creek basin in 1987 was 4 inches per year. A double-mass curve analysis of the relation of cumulative precipitation at Allentown to the flow of Schantz Spring for 1956-84 showed that cessation of quarry pumping and development of ground water for public supply in the Schantz Spring basin did not affect the flow of Schantz Spring. Ground-water flow in the Little Lehigh Creek basin was simulated using a finite-difference, two-dimensional computer model. The geologic units in the modeled area were simulated as a single water-table aquifer. The 134-squaremile area of carbonate rocks between the Lehigh River and Sacony Creek was modeled to include the natural hydrologic boundaries of the ground-water-flow system. The ground-water-flow model was calibrated under steady-state conditions using 1975-83 average recharge, evapotranspiration, and pumping rates. Each geologic unit was assigned a different hydraulic conductivity. Initial aquifer hydraulic conductivity was estimated from specific-capacity data. The average (1975-83) water budget for the Little Lehigh Creek basin was simulated. The simulated base flow from the carbonate rocks of the Little Lehigh Creek basin above gaging station 01451500 is 11.85 inches per year. The simulated ground-water underflow from the Little Lehigh Creek basin to the Cedar Creek basin is 4.04 inches per year. For steady-state calibration, the root-mean-squared difference between observed and simulated heads was 21.19 feet. The effects of increased ground-water development on base flow and underflow out of the Little Lehigh Creek basin for average and drought conditions were simulated by locating a hypothetical well field in different parts of the basin. Steady-state simulations were used to represent equilibrium conditions, which would be the maximum expected long-term effect. Increased ground-water development was simulated as hypothetical well fields pumping at the rate of 15, 25, and 45 million gallons per day in addition to existing ground-water withdrawals. Four hypothetical well fields were located near and away from Little Lehigh Creek in upstream and downstream areas. The effects of pumping a well field in different parts of the Little Lehigh Creek basin were compared. Pumping a well field located near the headwaters of Little Lehigh Creek and away from the stream would have greatest effect on inducing underflow from the Sacony Greek basin and the least effect on reducing base flow and underflow to the Ceda^r Creek basin. Pumping a well field located near the headwaters of Little Leh|igh Creek near the stream would have less impact on inducing underflow from|the Sacony Creek basin and a greater impact on reducing the base flow of Little Lehigh Creek because more of the pumpage would come from diverted base flow. Pumping a well field located in the downstream area of the Little Lehigh Creek basin away from the stream would have the greatest effect on the underflow to the Cedar Creek basin. Pumping a well field located in the downstream area of the Little Lehigh Creek basin near the stream would have the greatest effect on reducing the base flow of Little Lehigh Cteek. Model simulations show that groundwater withdrawals do not cause a proportional reduction in base flow. Under average conditions, ground-water withdrawals are equal to 48 to 70 percent of simulated base-flow reductions; under drought conditions, ground-water withdrawals are equal to 35 to 73 percent of simulated base-flow reductions. The hydraulic effects of pumping largely depend on well location. In the Little Lehigh basin, surface-water and ground-water divides do not coincide, and ground-water development, especially near surface-water divides, can cause ground-water divides to shift and induce ground-water underflow from adjacent basins. Large-scale ground-water pumping in a basin may not produce expected reductions of base flow in that basin because of shifts in the ground-water divide; however, such shifts can reduce base flow in adjacent surface-water basins.

Water-Resources Investigations Report↗

A hydrologic network supporting spatially referenced regression modeling in the Chesapeake Bay watershed

The U.S. Geological Survey has developed a methodology for statistically relating nutrient sources and land-surface characteristics to nutrient loads of streams. The methodology is referred to as SPAtially Referenced Regressions On Watershed attributes (SPARROW), and relates measured stream nutrient loads to nutrient sources using nonlinear statistical regression models. A spatially detailed digital hydrologic network of stream reaches, stream-reach characteristics such as mean streamflow, water velocity, reach length, and travel time, and their associated watersheds supports the regression models. This network serves as the primary framework for spatially referencing potential nutrient source information such as atmospheric deposition, septic systems, point-sources, land use, land cover, and agricultural sources and land-surface characteristics such as land use, land cover, average-annual precipitation and temperature, slope, and soil permeability. In the Chesapeake Bay watershed that covers parts of Delaware, Maryland, Pennsylvania, New York, Virginia, West Virginia, and Washington D.C., SPARROW was used to generate models estimating loads of total nitrogen and total phosphorus representing 1987 and 1992 land-surface conditions. The 1987 models used a hydrologic network derived from an enhanced version of the U.S. Environmental Protection Agency's digital River Reach File, and course resolution Digital Elevation Models (DEMs). A new hydrologic network was created to support the 1992 models by generating stream reaches representing surface-water pathways defined by flow direction and flow accumulation algorithms from higher resolution DEMs. On a reach-by-reach basis, stream reach characteristics essential to the modeling were transferred to the newly generated pathways or reaches from the enhanced River Reach File used to support the 1987 models. To complete the new network, watersheds for each reach were generated using the direction of surface-water flow derived from the DEMs. This network improves upon existing digital stream data by increasing the level of spatial detail and providing consistency between the reach locations and topography. The hydrologic network also aids in illustrating the spatial patterns of predicted nutrient loads and sources contributed locally to each stream, and the percentages of nutrient load that reach Chesapeake Bay.

Environmental Monitoring and Assessment↗

Factors controlling Li concentration and isotopic composition in formation waters and host rocks of Marcellus Shale, Appalachian Basin

In this study, water and whole rock samples from hydraulically fractured wells in the Marcellus Shale (Middle Devonian), and water from conventional wells producing from Upper Devonian sandstones were analyzed for lithium concentrations and isotope ratios (&delta; 7 Li). The distribution of lithium concentrations in different mineral groups was determined using sequential extraction. Structurally bound Li, predominantly in clays, accounted for 75-91 wt. % of total Li, whereas exchangeable sites and carbonate cement contain negligible Li (< 3%). Up to 20% of the Li is present in the oxidizable fraction (organic matter and sulfides). The &delta; 7 Li values for whole rock shale in Greene Co., Pennsylvania, and Tioga Co., New York, ranged from -2.3 to + 4.3&permil;, similar to values reported for other shales in the literature. The &delta; 7 Li values in shale rocks with stratigraphic depth record progressive weathering of the source region; the most weathered and clay-rich strata with isotopically light Li are found closest to the top of the stratigraphic section. Diagenetic illite-smectite transition could also have partially affected the bulk Li content and isotope ratios of the Marcellus Shale. In Greene Co., southwest Pennsylvania, the Upper Devonian sandstone formation waters have &delta; 7 Li values of + 14.6 &plusmn; 1.2 (2SD, n = 25), and are distinct from Marcellus Shale formation waters which have &delta; 7 Li of + 10.0 &plusmn; 0.8 (2SD, n = 12). These two formation waters also maintain distinctive 87 Sr/ 86 Sr ratios suggesting hydrologic separation between these units. Applying temperature-dependent illitilization model to Marcellus Shale, we found that Li concentration in clay minerals increased with Li concentration in pore fluid during diagenetic illite-smectite transition. Samples from north central PA show a much smaller range in both &delta; 7 Li and 87 Sr/ 86 Sr than in southwest Pennsylvania. Spatial variations in Li and &delta; 7 Li values show that Marcellus formation waters are not homogeneous across the Appalachian Basin. Marcellus formation waters in the northeastern Pennsylvania portion of the basin show a much smaller range in both &delta; 7 Li and 87 Sr/ 86 Sr, suggesting long term, cross-formational fluid migration in this region. Assessing the impact of potential mixing of fresh water with deep formation water requires establishment of a geochemical and isotopic baseline in the shallow, fresh water aquifers, and site specific characterization of formation water, followed by long-term monitoring, particularly in regions of future shale gas development.

New York, Pennsylvania↗

Earlier sediment differential compaction in Gibson County, Indiana

A thick wedge of nonmarine gray shale extends from the Galatia Channel and overlies the Springfield Coal Member of the Petersburg Formation (Pennsylvania) in western Gibson Country, but mainly marine black shales overlie the Springfield in the eastern part of the county. The sulfur content of the Springfield coal is lower beneath this wedge of nonmarine gray shale than beneath the marine shales. Fine-grained, compacted bay and overbank deposits form the western delta platform of the coal. Less compacted deposits of fluvial channel sandstone make up the eastern delta platform. Differential compaction of the delta platform of the Springfield coal controlled gray-shale distribution and determined the sulfur content of the coal.

International Journal of Coal Geology↗

Changes in groundwater flow and volatile organic compound concentrations at the Fischer and Porter Superfund Site, Warminster Township, Bucks County, Pennsylvania, 1993-2009

The 38-acre Fischer and Porter Company Superfund Site is in Warminster Township, Bucks County, Pa. Historically, as part of the manufacturing process, trichloroethylene (TCE) degreasers were used for parts cleaning. In 1979, the Bucks County Health Department detected TCE and other volatile organic compounds (VOCs) in water from the Fischer and Porter on-site supply wells and nearby public-supply wells. The Fischer and Porter Site was designated as a Superfund Site and placed on the National Priorities List in September 1983. A 1984 Record of Decision for the site required the Fischer and Porter Company to pump and treat groundwater contaminated by VOCs from three on-site wells at a combined rate of 75 gallons per minute to contain groundwater contamination on the property. Additionally, the Record of Decision recognized the need for treatment of the water from two nearby privately owned supply wells operated by the Warminster Heights Home Ownership Association. In 2004, the Warminster Heights Home Ownership Association sold its water distribution system, and both wells were taken out of service. The report describes changes in groundwater levels and contaminant concentrations and migration caused by the shutdown of the Warminster Heights supply wells and presents a delineation of the off-site groundwater-contamination plume. The U.S. Geological Survey (USGS) conducted this study (2006-09) in cooperation with the U.S. Environmental Protection Agency (USEPA). The Fischer and Porter Site and surrounding area are underlain by sedimentary rocks of the Stockton Formation of Late Triassic age. The rocks are chiefly interbedded arkosic sandstone and siltstone. The Stockton aquifer system is comprised of a series of gently dipping lithologic units with different hydraulic properties. A three-dimensional lithostratigraphic model was developed for the site on the basis of rock cores and borehole geophysical logs. The model was simplified by combining individual lithologic units into generalized units representing upward fining sedimentary cycles capped by a siltstone bed. These cycles were labeled units 1 through 8 and are called stratigraphic units in this report. Groundwater in the unweathered zone mainly moves through a network of interconnecting secondary openings--bedding-plane fractures and joints. Groundwater generally is unconfined in the shallower part of the aquifer and confined or semiconfined in the deeper part of the aquifer. The migration of VOCs from the Fischer and Porter Site source area is influenced by geologic and hydrologic controls. The hydrologic controls have changed with time. Stratigraphic units 2 and 3 crop out beneath the former Fischer and Porter plant. VOCs originating at the plant source area entered these stratigraphic units and moved downdip to the northwest. When the wells at and in the vicinity of the site were initially sampled in 1979-80, three public-supply wells (BK-366, BK-367, MG-946) and three industrial-supply wells (BK-368, BK-370, and BK-371) were pumping. Groundwater contaminated with VOCs flowed downdip and then northeast along strike toward well BK-366, downdip toward well BK-368, and downdip and then west along strike toward well MG-946. The long axis of the TCE plume is oriented about N. 18° W. in the direction of dip. In 1979-80, the leading edge of the plume was about 3,500 feet wide. With the cessation of pumping of the supply wells in 2004, the size of the plume has decreased. In 2007-09, the plume was approximately 2,000 feet long and 2,000 feet wide at the leading edge. On the western side of the site, TCE and tetrachloroethylene (PCE) appear to be moving downdip though stratigraphic unit 3. The downdip extent of TCE and PCE migration extended approximately 550 feet off-site to the northwest and 750 feet off-site to the north. TCE concentrations in water samples from wells at the western site boundary increased from 1996 to 2007. On the northern side of the site, TCE and PCE appeared to be moving downward and laterally though stratigraphic units 2, 3, and 4. Groundwater-flow directions shifted to the northwest in the intermediate and deep zones after cessation of pumping of well BK-366 in 2004. The shutdown of the Warminster Heights wells had little effect on the direction of groundwater flow in the shallow zone. In 2007, TCE concentrations measured in water samples from the three remediation wells by the USGS ranged from less than 340 to 3,000 µg/L, and PCE concentrations ranged from less than 8.4 to 51 µg/L. TCE concentrations in water samples from the source-area remediation wells have decreased with time but remain highly variable. From 2001 to 2008, the TCE and PCE concentrations in water samples from wells BK-370 and BK-371 showed a linear decreasing trend. TCE and PCE concentrations in water samples from well BK-1324 showed an exponentially decreasing trend. In 2007, TCE concentrations measured in water samples from shallow wells ranged from less than 0.1 to 14,000 µg/L, and PCE concentrations ranged from less than 0.1 to 340 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the shallow zone. In 2007, TCE concentrations measured in water samples from on-site intermediate-depth monitor wells ranged from less than 0.1 to 500 µg/L, and PCE concentrations ranged from 1.3 to 28 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the intermediate zone and extended off-site to the north and northwest of the source area. Concentrations of TCE in water samples north and west of the source area increased from 1996 to 2007. In 2007, the TCE concentrations measured in water samples from on-site monitor wells in the deep zone ranged from 1.1 to 86 µg/L, and PCE concentrations ranged from less than 0.1 to 8.4 µg/L. The TCE and PCE plumes generally followed the hydraulic gradient in the deep zone and extended off-site to the northwest of the source area. In general, concentrations of TCE in water samples from monitor wells outside the source area increased between 1996 and 2005 and decreased between 2005 and 2007; concentrations were less in 2007 than in 1996.

Pennsylvania↗

Quality-assurance design applied to an assessment of agricultural pesticides in ground water from carbonate bedrock aquifers in the Great Valley of eastern Pennsylvania

Assessments to determine whether agricultural pesticides are present in ground water are performed by the Commonwealth of Pennsylvania under the aquifer monitoring provisions of the State Pesticides and Ground Water Strategy. Pennsylvania's Department of Agriculture conducts the monitoring and collects samples; the Department of Environmental Protection (PaDEP) Laboratory analyzes the samples to measure pesticide concentration. To evaluate the quality of the measurements of pesticide concentration for a groundwater assessment, a quality-assurance design was developed and applied to a selected assessment area in Pennsylvania. This report describes the quality-assurance design, describes how and where the design was applied, describes procedures used to collect and analyze samples and to evaluate the results, and summarizes the quality assurance results along with the assessment results. The design was applied in an agricultural area of the Delaware River Basin in Berks, Lebanon, Lehigh, and Northampton Counties to evaluate the bias and variability in laboratory results for pesticides. The design—with random spatial and temporal components—included four data-quality objectives for bias and variability. The spatial design was primary and represented an area comprising 30 sampling cells. A quality-assurance sampling frequency of 20 percent of cells was selected to ensure a sample number of five or more for analysis. Quality-control samples included blanks, spikes, and replicates of laboratory water and spikes, replicates, and 2-lab splits of groundwater. Two analytical laboratories, the PaDEP Laboratory and a U.S. Geological Survey Laboratory, were part of the design. Bias and variability were evaluated by use of data collected from October 1997 through January 1998 for alachlor, atrazine, cyanazine, metolachlor, simazine, pendimethalin, metribuzin, and chlorpyrifos. Results of analyses of field blanks indicate that collection, processing, transport, and laboratory analysis procedures did not contaminate the samples; there were no false-positive results. Pesticides were detected in water when pesticides were spiked into (added to) samples. There were no false negatives for the eight pesticides in all spiked samples. Negative bias was characteristic of analytical results for the eight pesticides, and bias was generally in excess of 10 percent from the ‘true’ or expected concentration (34 of 39 analyses, or 87 percent of the ground-water results) for pesticide concentrations ranging from 0.31 to 0.51 mg/L (micrograms per liter). The magnitude of the negative bias for the eight pesticides, with the exception of cyanazine, would result in reported concentrations commonly 75-80 percent of the expected concentration in the water sample. The bias for cyanazine was negative and within 10 percent of the expected concentration. A comparison of spiked pesticide-concentration recoveries in laboratory water and ground water indicated no effect of the ground-water matrix, and matrix interference was not a source of the negative bias. Results for the laboratory-water spikes submitted in triplicate showed large variability for recoveries of atrazine, cyanazine, and pendimethalin. The relative standard deviation (RSD) was used as a measure of method variability over the course of the study for laboratory waters at a concentration of 0.4 mg/L. An RSD of about 11 percent (or about ?0.05 mg/L)characterizes the method results for alachlor, chlorpyrifos, metolachlor, metribuzin, and simazine. Atrazine and pendimethalin have RSD values of about 17 and 23 percent, respectively. Cyanazine showed the largest RSD at nearly 51 percent. The pesticides with low variability in laboratory-water spikes also had low variability in ground water. The assessment results showed that atrazinewas the most commonly detected pesticide in ground water in the assessment area. Atrazine was detected in water from 22 of the 28 wells sampled, and recovery results for atrazine were some of the worst (largest negative bias). Concentrations of the eight pesticides in ground water from wells were generally less than 0.3 µg/L. Only six individual measurements of the concentrations in water from six of the wells were at or above 0.3 µg/L, five for atrazine and one for metolachlor. There were eight additional detections of metolachlor and simazine at concentrations less than 0.1 µg/L. No well water contained more than one pesticide at concentra-tions at or above 0.3 µg/L. Evidence exists, how-ever, for a pattern of co-occurrence of metolachlor and simazine at low concentrations with higher concentrations of atrazine. Large variability in replicate samples and negative bias for pesticide recovery from spiked samples indicate the need to use data for pesticide recovery in the interpretation of measured pesti-cide concentrations in ground water. Data from samples spiked with known amounts of pesticides were a critical component of a quality-assurance design for the monitoring component of the Pesti-cides and Ground Water Strategy. Trigger concentrations, the concentrations that require action under the Pesticides and Ground Water Strategy, should be considered maximums for action. This consideration is needed because of the magnitude of negative bias.

Water-Resources Investigations Report↗

Ground-water resources in the tri-state region adjacent to the Lower Delaware River

The purpose of this report is to appraise and evaluate the groundwater resources of a tri-state region adjacent to the lower Delaware River that is centered around Philadelphia, Pa., and Camden, N. J., and includes Wilmington, Del., and Trenton, N.J. Specifically, the region includes New Castle County, Del.; Burlington, Camden, Gloucester, Mercer, and Salem Counties in New Jersey; and Bucks, Chester, Delaware, Montgomery, and Philadelphia Counties in Pennsylvania. The peculiar advantages of ground water, such as its availability in many places without the necessity for expensive pipelines and its relatively uniform temperature and quality, make it an especially valuable resource in an industrial area. Large, readily available supplies of good, fresh water have contributed substantially to the recent rapid industrial growth of the lower Delaware River basin and will be vital to its continued prosperity. The major part of these supplies is drawn from the streams passing through the region, but very large quantities of ground water also are used. The region is divided almost equally by the Fall Line, which extends in a southwesterly direction along the general course of the Delaware River from Trenton, N.J., to Wilmington, Del., and beyond. Northwest of the Fall Line is a region of consolidated rocks in which ground water occurs mainly in cracks, crevices, and openings created or enlarged by weathering. The capacity of the various geologic formations to yield water depends largely upon the degree to which they have been fractured and weathered. The yield of individual wells in this part of the region is generally small to moderate and not readily predictable. Ground water in this part of the region is generally low in dissolved minerals and suitable for many uses without treatment. Southeast of the Fall Line lie the unconsolidated rocks of the Coastal Plain. Ground water occurs in these rocks largely in the pore spaces between the individual mineral grains. The major formations and the principal aquifers are rather uniform in their water-bearing characteristics over large areas. The yield of individual wells is moderate to very large and may be predicted with a reasonable degree of assurance. Sufficient quantities of ground water are available in most places for all ordinary purposes. The chemical quality of the ground water from the Coastal Plain aquifers is generally acceptable for most uses, but objectionable quantities of iron or other minerals are found in some places, and some waters have a low pH and are corrosive. More than 40 distinct geologic formations occur in the region. They range in age from Precambrian to Recent. Nearly all will yield some water to wells. However, only about a dozen yield water freely enough to be considered major aquifers. Of these, the sands of the Raritan and Magothy formations have been developed most intensively, and the Cohansey sand appears to have the greatest capacity for additional development. The present withdrawal of ground water in the region is estimated to average more than 200 mgd, of which more than half is drawn from the aquifers in the Raritan and Magothy formations. It is estimated that additional supplies of ground water, aggregating more than 1 billion gallons a day, can be developed within the region. Furthermore, substantial additional quantities can be developed outside the region for use within it if the need should ever arise. Induced recharge from the Delaware River supplies a substantial portion of the total water drawn from the Raritan and Magothy formations. In some areas, the quality of the water from these aquifers is approaching that of the river. Increased withdrawals of water from wells along the river will tend to increase induced recharge. Thus, the maintenance of a good quality of water in the river, which is desirable for many other reasons, is imperative if the quality of the ground-water supply is to be maintained. The proposed deepening of the Delaware River channel from Philadelphia to Trenton will greatly increase the opportunity for the interchange of water between the river and the adjacent aquifers. Whether this will be beneficial or detrimental to the ground-water supplies will depend upon the quality of the water in that reach of the river. If an acceptable quality of river water is maintained, the groundwater resources of the region will be augmented. If salt water from the ocean or excessive contamination from other sources should render the river water undesirable as a source of recharge, actual and potential ground-water supplies aggregating about 250 mgd would be endangered. The danger of salt-water encroachment into the aquifers normally yielding fresh water may limit the optimum yield of some of the most important aquifers in the region. Encroachment may come either from salt water in the surface-water bodies of the region or from parts of the aquifers, normally containing salt water. The protection of ground-water supplies against salt-water encroachment can be maintained only by constant vigilance, careful distribution of the pumping from the aquifers, regular sampling of outpost wells in exposed localities, and adjustment of rates of pumping in the light of changing conditions. The maximum beneficial utilization of the ground-water resources cannot be accomplished in haphazard fashion. It must be planned and controlled on the basis of sound, current information about the hydrology of the various aquifers. Continued and, in some areas, intensified investigations of the ground-water resources of the region should form the basis for such planning and control.

New Jersey, Pennsylvania, Delaware↗

Effects of air injection at Prompton Lake, Wayne County, Pennsylvania

Air injected into the hypolimnion of Prompton Lake at a maximum rate of 210 cubic feet per minute (6 cubic metres per minute) during a 65-day period (July 27 to September 30, 1973) produced the following results: (1) With cooler air temperatures prevailing, the mean subsurface temperature increased by 4.0&deg; C compared with the same period in 1972, (2) although chemical and thermal destratiflcation was incomplete, 6 weeks of air injection increased the dissolved-oxygen concentration of the entire tropholytic zone to more than 4 milligrams per litre, (3) concentrations of nitrogen increased in the trophogenic zone during air injection, and (4) Anabaena flos-aquae attained cell concentrations in excess of 4,500 per millilitre during air injection.

Pennsylvania↗

Executive summary

Fossil fuels from the Appalachian basin region have been major contributors to the Nation&rsquo;s energy needs over much of the last three centuries. Early records indicate that Appalachian coal was first mined in the middle 1700s (Virginia and Pennsylvania) and was used sparingly to fuel colonial settlements and, later, a fledgling industrial-based economy along the eastern seaboard of the United States (de Witt and Milici, 1989). In 2011, central Appalachian basin coal production accounted for approximately 77 percent of all U.S. metallurgical (or coking) coal and 29 percent of total U.S. production (U.S. Energy Information Administration, 2013). Following initial discoveries and commercial use in western New York (1821) and Ohio and West Virginia (mid-1830s), the Appalachian petroleum (oil and gas) industry began in earnest in 1859 with the discovery of oil at the Drake well in northwestern Pennsylvania. Between 1860 and 1989, the Appalachian basin produced more than 2.5 billion barrels of oil (BBO) and more than 30 trillion cubic feet of gas (TCFG) from more than 500,000 wells (de Witt and Milici, 1989). Although both oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to the Nation&rsquo;s energy needs. For example, the U.S. Energy Information Administration (2010) estimated that there are 6,484 million short tons of recoverable coal reserves in the Appalachian basin. Similarly, about 14.7 billion barrels of oil equivalent (BBOE) (1.2 BBO+81 TCFG [or 13.5 BBOE]) of recoverable Appalachian basin oil and gas remain available of an estimated ultimate endowment of approximately 25.5 billion BBOE (cumulative production + reserves + estimated recoverable undiscovered resources) (this volume, chap. C.1). U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. Several of the chapters have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters cover large segments of the basin and a wide range of stratigraphic intervals. As the title implies, this volume addresses topics that refer to the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results and documentation of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available as downloadable geographic information system (GIS) data files (such as selected coal beds, selected oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology). Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs also are included. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources such as those by Arndt and others (1968) and the numerous contributors to USGS Miscellaneous Map Series I&minus;917 (for example, Harris and others, 1978), respectively. USGS Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the wide variety of topics, papers, and digital images of value for landuse and policy planning issues. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian Basin↗

Groundwater-Quality Assessment, Pike County, Pennsylvania, 2007

Pike County, a 545 square-mile area in northeastern Pennsylvania, has experienced the largest relative population growth of any county in the state from 1990 to 2000 and its population is projected to grow substantially through 2025. This growing population may result in added dependence and stresses on water resources, including the potential to reduce the quantity and degrade the quality of groundwater and associated stream base flow with changing land use. Groundwater is the main source of drinking water in the county and is derived primarily from fractured-rock aquifers (shales, siltstones, and sandstones) and some unconsolidated glacial deposits that are recharged locally from precipitation. The principal land uses in the county as of 2005 were public, residential, agricultural, hunt club/private recreational, roads, and commercial. The public lands cover a third of the county and include national park, state park, and other state lands, much of which are forested. Individual on-site wells and wastewater disposal are common in many residential areas. In 2007, the U.S. Geological Survey, in cooperation with the Pike County Conservation District, began a study to provide current information on groundwater quality throughout the county that will be helpful for water-resource planning. The countywide reconnaissance assessment of groundwater quality documents current conditions with existing land uses and may serve as a baseline of groundwater quality for future comparison. Twenty wells were sampled in 2007 throughout Pike County to represent groundwater quality in the principal land uses (commercial, high-density and moderate-density residential with on-site wastewater disposal, residential in a sewered area, pre-development, and undeveloped) and geologic units (five fractured-rock aquifers and one glacial unconsolidated aquifer). Analyses selected for the groundwater samples were intended to identify naturally occurring constituents from the aquifer or constituents introduced by human activities that pose a health risk or otherwise were of concern in groundwater in the county. The analyses included major ions, nutrients, selected trace metals, volatile organic compounds (VOCs), selected organic wastewater compounds, gross alpha-particle and gross beta-particle activity, uranium, and radon-222. Analyses of the 20 samples were primarily for dissolved constituents, but six samples were analyzed for both dissolved and total metals. Results of the 2007 sampling indicated few water-quality problems, although concentrations of some constituents indicated influence of human activities on groundwater. No constituent analyzed exceeded any primary drinking-water standard or maximum contaminant level (MCL) established by the U.S. Environmental Protection Agency. Radon-222 levels were greater than, or equal to, the proposed MCL of 300 picocuries per liter (pCi/L) in water from 15 (75 percent) of the 20 wells. Radon-222 levels did not exceed the alternative MCL of 4,000 pCi/L in any groundwater sample. Radon-222 is naturally occurring, and the greatest concentrations (up to 2,650 pCi/L) were in water samples from wells in members of the Catskill Formation, a fractured-rock aquifer. The dissolved arsenic concentration of 3.9 micrograms per liter (ug/L) in one sample was greater than the health-advisory (HA) level of 2 ug/L but less than the MCL of 10 ug/L. Recommended or secondary maximum contaminant levels (SMCLs) were exceeded for pH, dissolved iron, and dissolved manganese. In six samples analyzed for dissolved and total concentrations of selected metals, total concentrations commonly were much greater than dissolved concentrations of iron, and to a lesser degree, for arsenic, lead, copper, and manganese. Concentrations of iron above the SMCL of 300 ug/L may be more widespread in the county for particulate iron than for dissolved iron. The total arsenic concentration in one of the six samples was greater than the HA level of

Scientific Investigations Report↗

Map showing slope movements in the Oak Forest Quadrangle, Greene County, southwestern Pennsylvania

This map is the first example in the eastern United States of a 1:24,000-scale 7.5&ndash; minute quadrangle map that identifies areas with slope&mdash;stability problems in detail. Such a map enables the user to make a rapid evaluation of the potential for mass movement. Furthermore, detailed slope movement inventory of this type can serve as a framework for statistical analyses of several factors that cause slope failures, such as the effects of bedrock lithology, soil and slope characteristics, and precipitation. Planners, engineers, soil scientists, geologists, and elected officials should find the map useful in the assessment of slope hazards and planning for future land use. Final evaluation of any site within the quadrangle should be based on an examination by a soils engineer or an engineering geologist. Field investigations in the springs of 1981 and 1982 and the fall of 1981 involved nearly 60 days of traverses. The foot traverses were supplemented by the interpretation of the land surface on vertical black-and-white aerial photography flown in January and February of 1973 at a scale of nearly 1:24,000. Earlier aerial photography flown in June and July 1939 at a scale of 1:20,000 and more recent but significantly smaller scale photography (1:80,000) flown in June 1977 supplied additional documentation. More than 1,200 active or recently active and 900 older slope movements were identified. The geologic map of the Oak Forest quadrangle (Roen, 1972) is one of several geologic maps at a scale of 1:24,000 in eastern and central Greene County. Stone (1932) wrote an earlier report of the geology and mineral resources of Greene County. A series of reconnaissance landslide maps at 1:24,000 scale based mainly on aerial photographic interpretation included Greene and adjacent counties (Hackman and Thomas, 1978). Selection of the Oak Forest quadrangle for a more comprehensive study of the slope movements was based on the existence of a recent geologic map (Roen, 1972), sizeable tracts of both forested and non-forested land, nearby precipitation record stations, a large number of pipelines which could offer pertinent data, and good accessibility of terrain from secondary roads. Finally, Hackman and Thomas (1978) showed that the area was representative of any quadrangle in the northern part of the Dunkard basin in its distribution and density of slope movements. The quadrangle is located about 65 km southwest of Pittsburgh, Penn. (fig. 1). Three distinct drainage systems (north, east, and south trending) are represented within the quadrangle (fig. 2).

Pennsylvania↗

Groundwater quality in the Lake Champlain and Susquehanna River basins, New York, 2014

In a study conducted by the U.S. Geological Survey in cooperation with the New York State Department of Environmental Conservation, groundwater samples were collected from 6 production wells and 7 domestic wells in the Lake Champlain Basin and from 11 production wells and 9 domestic wells in the Susquehanna River Basin in New York. All samples were collected from June through December 2014 to characterize groundwater quality in these basins. The samples were collected and processed using standard procedures of the U.S. Geological Survey and were analyzed for 148 physiochemical properties and constituents, including dissolved gases, major ions, nutrients, trace elements, pesticides, volatile organic compounds, radionuclides, and indicator bacteria. The Lake Champlain Basin study area covers the 3,050 square miles of the basin in northeastern New York; the remaining part of the basin is in Vermont and Canada. Of the 13 wells sampled in the Lake Champlain Basin, 6 are completed in sand and gravel, and 7 are completed in bedrock. Groundwater in the Lake Champlain Basin was generally of good quality, although properties and concentrations of some constituents— fluoride, iron, manganese, dissolved solids, sodium, radon-222, total coliform bacteria, fecal coliform bacteria, and Escherichia coli bacteria—sometimes equaled or exceeded primary, secondary, or proposed drinking-water standards. The constituent most frequently detected in concentrations exceeding drinking-water standards (5 of 13 samples) was radon-222. The Susquehanna River Basin study area covers the entire 4,522 square miles of the basin in south-central New York; the remaining part of the basin is in Pennsylvania. Of the 20 wells sampled in the Susquehanna River Basin, 11 are completed in sand and gravel, and 9 are completed in bedrock. Groundwater in the Susquehanna River Basin was generally of good quality, although properties and concentrations of some constituents—pH, chloride, sodium, dissolved solids, iron, manganese, aluminum, arsenic, barium, gross-alpha radioactivity, radon-222, methane, total coliform bacteria, and fecal coliform bacteria—sometimes equaled or exceeded primary, secondary, or proposed drinking-water standards. As in the Lake Champlain Basin, the constituent most frequently detected in concentrations exceeding drinking-water standards (13 of 20 samples) was radon-222.

New York↗

The effects of the Hurricane Agnes flood on channel geometry and sediment discharge of selected streams in the Susquehanna River basin, Pennsylvania

The Hurricane Agnes flood seems to have hardly changed the channel geometry of the Pennsylvania streams studied in this report. The 10 sites studied generally showed that the width of the stream channels had been changed little by the flood and that streambed altitudes had been lowered less than a foot (0.3 m). The velocity of the streams at a given discharge had decreased. In comparison, the sediment deposited by the December 1964 flood in northwestern California commonly raised the streambed altitudes several feet. The differences in the effects of the two floods may have been produced by the availability of sediment for transport, by the relative size of sediment carried in suspension or bedload, or by the relative magnitudes of the floods.

Pennsylvania↗