Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Information Systems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Probability of detecting elevated concentrations of nitrate in ground water in a six-county area of south-central Idaho

A probability map constructed for this study identified several areas in a six-county region of south-central Idaho with high probabilities of detecting elevated concentrations (greater than 2 milligrams per liter) of nitrate. An increasing proportion of Idaho’s ground water being used for drinking water and large increases in the inputs of nitrogen to ground water in Cassia, Gooding, Jerome, Lincoln, Minidoka, and Twin Falls Counties have prompted concerns about the quality of the resource. The probability map was constructed to assist regulatory and resource agencies in managing land use and protecting water resources. To construct the probability map, hydrogeologic and anthropogenic data were integrated with ground-water quality data in a geographic information system. The resulting data set contained land use, geology, precipitation, soil characteristics, depth to ground water, nitrogen input, and ground-water velocity information for each of the 1,365 samples collected from 1991 to 2001. Logistic regression analysis was used to determine the most statistically significant variables related to the detection of elevated nitrate concentrations. The resulting multivariate probability model showed that ground-water velocity, nitrogen input, precipitation, soil drainage, land use, and depth to ground water were significantly correlated with elevated nitrate concentrations. A subset of the water-quality data set was used to verify these results. Linear regression of the percentage of predicted probabilities of elevated nitrate concentrations and the actual percentage of elevated nitrate concentrations with the model data set and the verification data set both showed good correlations: r-squared values were 0.96 and 0.97, respectively. Statistical comparisons of both data sets showed that ground-water samples containing elevated nitrate concentrations had significantly higher probabilities of detection (p < 0.001) than samples without elevated nitrate concentrations. On the basis of these results, a map identifying the probability of detecting elevated nitrate concentrations was constructed. High-probability areas on the map coincided with regions of agricultural land use and high nitrogen input, except in southern Gooding County and western Jerome County. In these areas, high ground-water velocities representing a predominance of regional ground water resulted in a low probability of detecting elevated nitrate concentrations. Areas of poor prediction tended to be congregated along the transition zone between high and low ground-water velocities in Jerome and Gooding Counties, indicating a mix of regional and recently recharged ground water.

Idaho↗

What is the (real) rate of soil health practice adoption? Making sense of three data sources

Conservation stakeholders looking to quantify the impact of their investments to increase soil health practice adoption over time often face challenges in interpreting practice adoption data due to discrepancies in language and results among data sources. Similarly, efforts to estimate environmental outcomes of practice adoption, such as water quality and greenhouse gas emissions, can vary depending on different practice adoption input data. To help make sense of different adoption data sources, we compared county-level adoption data for winter cover crops (WCC), no-till (NT), and reduced tillage (RT) in three areas of the United States with contrasting climates and production systems: central Illinois (CIL), southern Illinois (SIL), and western New York (WNY). We analyzed data available during 2015 through 2022 from the Operational Tillage Information System (OpTIS, remote sensing), US Census of Agriculture (AgCensus, a farmer survey), and, specifically in Illinois, the Illinois Soil Conservation Transect Survey (Transect, a roadside survey). The magnitude of differences between the datasets depended on the practice and geographic location. For example, OpTIS and AgCensus tillage data were much more similar in Illinois (average difference of less than 4 percentage points) compared to New York (average differences of 20 percentage points). Similarly, there was less variability and smaller differences between OpTIS and AgCensus WCC data in Illinois compared to WNY. AgCensus tended to report lower WCC adoption for Illinois and greater adoption in WNY compared to OpTIS. All data sources agreed that the rate of change in tillage practices is slow (mainly –1% to 1%) and that adoption of WCC is low (assuming linear growth, it could take nearly a century to reach 50% WCC adoption in CIL). Differences among the datasets were attributed to definitional inconsistencies for RT and NT and how WCC data were acquired. For example, the AgCensus asks if a WCC was planted, whereas OpTIS and Transect evaluate the presence of a standing WCC. Data sources also reflect different time periods (calendar years or crop years) and types of cropland assessed (corn [ Zea mays L.], soybean [ Glycine max {L.} Merr.], or all cropland). We propose two recommendations to improve interpretation and consistency: (1) a working group to harmonize definitions and protocols and develop educational materials for data users, and (2) a research effort that integrates different adoption data types and produces publicly available adoption data at HUC-10 and county scales. Such activities could help improve data access and utility for evidence-based conservation decision-making and enhance the accuracy of environmental models that rely on adoption data as input.

Journal of Soil and Water Conservation↗

Archive of single-beam bathymetry data collected from select areas in Weeks Bay and Weeks Bayou, southwest Louisiana, January 2013

A team of scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, collected 92 line-kilometers of dual-frequency single-beam bathymetry data in the tidal creeks, bayous, and coastal areas near Weeks Bay, southwest Louisiana. Limited bathymetry data exist for these tidally and meteorologically influenced shallow-water estuarine environments. In order to reduce the present knowledge gap, the objectives of this study were to (1) develop methods for regional inland bathymetry mapping and monitoring, (2) test inland bathymetry mapping system in pilot locations for integrating multiple elevation (aerial and terrestrial lidar) and bathymetry datasets, (3) implement inland bathymetry mapping and monitoring in highly focused sites, and (4) evaluate changes in bathymetry and channel-fill sediment storage using these methods. This report contains single-beam bathymetric data collected between January 14 and 18, 2013. Data were collected from the RV Mako (5-meter vessel) in water depths that ranged from <1 meter to 7.7 meters. Locations of data collection ranged from open-bay systems to narrow inland tidal creeks (U.S. Geological Survey Field Activity Number 13CCT01). This report serves as an archive of processed bathymetry data. Geographic information system data provided in this document include a 10-meter cell-size interpolated gridded bathymetry surface, and trackline maps. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. Do not use these data for navigational purposes.

Louisiana↗

Precipitation and Runoff Simulations of the Carson Range and Pine Nut Mountains, and Updated Estimates of Ground-Water Inflow and the Ground-Water Budgets for Basin-Fill Aquifers of Carson Valley, Douglas County, Nevada, and Alpine County, California

Recent estimates of ground-water inflow to the basin-fill aquifers of Carson Valley, Nevada, and California, from the adjacent Carson Range and Pine Nut Mountains ranged from 22,000 to 40,000 acre-feet per year using water-yield and chloride-balance methods. In this study, watershed models were developed for watersheds with perennial streams and for watersheds with ephemeral streams in the Carson Range and Pine Nut Mountains to provide an independent estimate of ground-water inflow. This report documents the development and calibration of the watershed models, presents model results, compares the results with recent estimates of ground-water inflow to the basin-fill aquifers of Carson Valley, and presents updated estimates of the ground-water budget for basin-fill aquifers of Carson Valley. The model used for the study was the Precipitation-Runoff Modeling System, a physically based, distributed-parameter model designed to simulate precipitation and snowmelt runoff as well as snowpack accumulation and snowmelt processes. Geographic Information System software was used to manage spatial data, characterize model drainages, and to develop Hydrologic Response Units. Models were developed for * Two watersheds with gaged perennial streams in the Carson Range and two watersheds with gaged perennial streams in the Pine Nut Mountains using measured daily mean runoff, * Ten watersheds with ungaged perennial streams using estimated daily mean runoff, * Ten watershed with ungaged ephemeral streams in the Carson Range, and * A large area of ephemeral runoff near the Pine Nut Mountains. Models developed for the gaged watersheds were used as index models to guide the calibration of models for ungaged watersheds. Model calibration was constrained by daily mean runoff for 4 gaged watersheds and for 10 ungaged watersheds in the Carson Range estimated in a previous study. The models were further constrained by annual precipitation volumes estimated in a previous study to provide estimates of ground-water inflow using similar water input. The calibration periods were water years 1990-2002 for watersheds in the Carson Range, and water years 1981-97 for watersheds in the Pine Nut Mountains. Daily mean values for water years 1990-2002 were then simulated using the calibrated watershed models in the Pine Nut Mountains. The daily mean values of precipitation, runoff, evapotranspiration, and ground-water inflow simulated from the watershed models were summed to provide annual mean rates and volumes for each year of the simulations, and mean annual rates and volumes computed for water years 1990-2002. Mean annual bias for the period of record for models of Daggett Creek and Fredericksburg Canyon watersheds, two gaged perennial watersheds in the Carson Range, was within 4 percent and relative errors were about 6 and 12 percent, respectively. Model fit was not as satisfactory for two gaged perennial watersheds, Pine Nut and Buckeye Creeks, in the Pine Nut Mountains. The Pine Nut Creek watershed model had a large negative mean annual bias and a relative error of -11 percent, underestimated runoff for all years but the wet years in the latter part of the record, but adequately simulated the bulk of the spring runoff most of the years. The Buckeye Creek watershed model overestimated mean annual runoff with a relative error of about -5 percent when water year 1994 was removed from the analysis because it had a poor record. The bias and error of the calibrated models were within generally accepted limits for watershed models, indicating the simulated rates and volumes of runoff and ground-water inflow were reasonable. The total mean annual ground-water inflow to Carson Valley computed using estimates simulated by the watershed models was 38,000 acre-feet, including ground-water inflow from Eagle Valley, recharge from precipitation on eolian sand and gravel deposits, and ground-water recharge from precipitation on the western alluvial fans. The estimate was in close agreement with that obtained from the chloride-balance method, 40,000 acre-feet, but was considerably greater than the estimate obtained from the water-yield method, 22,000 acre-feet. The similar estimates obtained from the watershed models and chloride-balance method, two relatively independent methods, provide more confidence that they represent a reasonably accurate volume of ground-water inflow to Carson Valley. However, the two estimates are not completely independent because they use similar distributions of mean annual precipitation. Annual ground-water recharge of the basin-fill aquifers in Carson Valley ranged from 51,000 to 54,000 acre-feet computed using estimates of ground-water inflow to Carson Valley simulated from the watershed models combined with previous estimates of other ground-water budget components. Estimates of mean annual ground-water discharge range from 44,000 to 47,000 acre-feet. The low range estimate for ground-water recharge, 51,000 acre-feet per year, is most similar to the high range estimate for ground-water discharge, 47,000 acre-feet per year. Thus, an average annual volume of about 50,000 acre-feet is a reasonable estimate for mean annual ground-water recharge to and discharge from the basin-fill aquifers in Carson Valley. The results of watershed models indicate that significant interannual variability in the volumes of ground-water inflow is caused by climate variations. During multi-year drought conditions, the watershed simulations indicate that ground-water recharge could be as much as 80 percent less than the mean annual volume of 50,000 acre-feet.

Scientific Investigations Report↗

Distribution of Eurasian watermilfoil, Myriophyllum spicatum , in the St. Clair-Detroit River system in 1978

Submersed macrophytes were surveyed at 595 stations located throughout the St. Clair-Detroit River system between Lakes Huron and Erie, 23 August to 13 October 1978. Eurasian watermilfoil ( Myriophyllum spicatum ), first recorded in the system in 1974, became the fourth most common submersed macrophyte in the system by 1978. However, it has not been reported as a widespread nuisance in this system as it has in many other large water bodies in the United States. Observations made during the present study, and interpretation of an aerial photograph, suggest that M. spicatum was a minor nuisance to small boat navigation in portions of the system. Information presented in this study provides a baseline against which future changes in the occurrence of M. spicatum in the St. Clair-Detroit River system can be measured.

Journal of Great Lakes Research↗

Map showing geologic terranes of the Hailey 1°x2° quadrangle and the western part of the Idaho Falls 1°x2° quadrangle, south-central Idaho

The paper version of Map Showing Geologic Terranes of the Hailey 1x2 Quadrangle and the western part of the Idaho Falls 1x2 Quadrangle, south-central Idaho was compiled by Ron Worl and Kate Johnson in 1995. The plate was compiled on a 1:250,000 scale topographic base map. TechniGraphic System, Inc. of Fort Collins Colorado digitized this map under contract for N.Shock. G.Green edited and prepared the digital version for publication as a geographic information system database. The digital geologic map database can be queried in many ways to produce a variety of geologic maps.

Idaho↗

Coastal bathymetry and backscatter data collected in 2012 from the Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research Project, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys off the northern Chandeleur Islands, Louisiana, in July and August of 2012. The objective of the study is to better understand barrier island geomorphic evolution, particularly storm-related depositional and erosional processes that shape the islands over annual to interannual timescales (1-5 years). Collecting geophysical data will allow us to identify relationships between the geologic history of the island and its present day morphology and sediment distribution. This mapping effort was the second in a series of three planned surveys in this area. High resolution geophysical data collected in each of 3 consecutive years along this rapidly changing barrier island system will provide a unique time-series dataset that will significantly further the analyses and geomorphological interpretations of this and other coastal systems, improving our understanding of coastal response and evolution over short time scales (1-5 years). This Data Series report includes the geophysical data that were collected during two cruises ( USGS Field Activity Numbers 12BIM03 and 12BIM04 ) aboard the RV Survey Cat and the RV Twin Vee along the northern portion of the Chandeleur Islands, Breton National Wildlife Refuge, Louisiana. Data were acquired with the following equipment: a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz (kHz)), an EdgeTech 424 (4-24 kHz) chirp sub-bottom profiling system, and a Knudsen 320BP (210 kHz) echosounder. This report serves as an archive of processed interferometric swath and single-beam bathymetry data. Geographic information system data products include an interpolated digital elevation model, an acoustic backscatter mosaic, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation.

Louisiana↗

Intrusive rock database for the Digital Geologic Map of Utah

Digital geologic maps offer the promise of rapid and powerful answers to geologic questions using Geographic Information System software (GIS). Using modern GIS and database methods, a specialized derivative map can be easily prepared. An important limitation can be shortcomings in the information provided in the database associated with the digital map, a database which is often based on the legend of the original map. The purpose of this report is to show how the compilation of additional information can, when prepared as a database that can be used with the digital map, be used to create some types of derivative maps that are not possible with the original digital map and database. This Open-file Report consists of computer files with information about intrusive rocks in Utah that can be linked to the Digital Geologic Map of Utah (Hintze et al., 2000), an explanation of how to link the databases and map, and a list of references for the databases. The digital map, which represents the 1:500,000-scale Geologic Map of Utah (Hintze, 1980), can be obtained from the Utah Geological Survey (Map 179DM). Each polygon in the map has a unique identification number. We selected the polygons identified on the geologic map as intrusive rock, and constructed a database (UT_PLUT.xls) that classifies the polygons into plutonic map units (see tables). These plutonic map units are the key information that is used to relate the compiled information to the polygons on the map. The map includes a few polygons that were coded as intrusive on the state map but are largely volcanic rock; in these cases we note the volcanic rock names (rhyolite and latite) as used in the original sources Some polygons identified on the digital state map as intrusive rock were misidentified; these polygons are noted in a separate table of the database, along with some information about their true character. Fields may be empty because of lack of information from references used or difficulty in finding information. The information in the database is from a variety of sources, including geologic maps at scales ranging from 1:500,000 to 1:24,000, and thesis monographs. The references are shown twice: alphabetically and by region. The digital geologic map of Utah (Hintze and others, 2000) classifies intrusive rocks into only 3 categories, distinguished by age. They are: Ti, Tertiary intrusive rock; Ji, Upper to Middle Jurassic granite to quartz monzonite; and pCi, Early Proterozoic to Late Archean intrusive rock. Use of the tables provided in this report will permit selection and classification of those rocks by lithology and age. This database is a pilot study by the Survey and Analysis Project of the U.S. Geological Survey to characterize igneous rocks and link them to a digital map. The database, and others like it, will evolve as the project continues and other states are completed. We release this version now as an example, as a reference, and for those interested in Utah plutonic rocks.

Utah↗

Development of a digital land cover data base for the Selawik National Wildlife Refuge

Digital land cover and terrain data of the Selawik National Wildlife Refuge were produced by the U.S. Geological Survey's (USGS) Earth Resources Observation Systems Alaska Field Office for the U.S. Fish and Wildlife Service. These and other environmental data were incorporated into a Fish and Wildlife Service geographic information system to prepare a comprehensive conservation plan and an environmental impact statement for the refuge and to assist in research and management of the refuge. The digital data base, stored on tapes, includes land cover classifications from Landsat multispectral scanner data, elevation, slope, and aspect data for the area covered by the USGS Selawik and Shungnak l:250,000-scale topographic maps. The maps incorporate more than 90 percent of the refuge. Additional digital data in the data base include (a) land cover of the entire refuge at 50-, 200-, and 400-m pixel sizes derived from Landsat multispectral scanner data; (b) Landsat multispectral scanner data registered to a 50-m Universal Transverse Mercator grid; (c) elevation, slope, aspect, and solar illumination data registered to each Landsat scene; (d) stream hydrography and surficial geology digitized from USGS l:250,000-scale quadrangle maps; and (e) Refuge and wilderness boundaries. In addition to the digital products, color hard copy maps were produced from the l:250,000-scale quadrangle base land cover, elevation, slope, and aspect digital data.

Alaska↗

Development of a geodatabase and conceptual model of the hydrogeologic units beneath air force plant 4 and Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas

Air Force Plant 4 and adjacent Naval Air Station-Joint Reserve Base Carswell Field at Fort Worth, Texas, constitute a government-owned, contractor-operated facility that has been in operation since 1942. Contaminants from AFP4, primarily volatile organic compounds and metals, have entered the ground-water-flow system through leakage from waste-disposal sites and from manufacturing processes. The U.S. Geological Survey developed a comprehensive geodatabase of temporal and spatial environmental information associated with the hydrogeologic units (alluvial aquifer, Goodland-Walnut confining unit, and Paluxy aquifer) beneath the facility and a three-dimensional conceptual model of the hydrogeologic units integrally linked to the geodatabase. The geodatabase design uses a thematic layer approach to create layers of feature data using a geographic information system. The various features are separated into relational tables in the geodatabase on the basis of how they interact and correspond to one another. Using the geodatabase, geographic data at the site are manipulated to produce maps, allow interactive queries, and perform spatial analyses. The conceptual model for the study area comprises computer-generated, three-dimensional block diagrams of the hydrogeologic units. The conceptual model provides a platform for visualization of hydrogeologic-unit sections and surfaces and for subsurface environmental analyses. The conceptual model is based on three structural surfaces and two thickness configurations of the study area. The three structural surfaces depict the altitudes of the tops of the three hydrogeologic units. The two thickness configurations are those of the alluvial aquifer and the Goodland-Walnut confining unit. The surface of the alluvial aquifer was created using a U.S. Geological Survey 10-meter digital elevation model. The 2,130 point altitudes of the top of the Goodland-Walnut unit were compiled from lithologic logs from existing wells, available soil-boring logs, and previous studies. Data from 120 wells, primarily from existing reports, were used to create a map of the approximate altitude of the Paluxy aquifer.

Texas↗

Film cameras or digital sensors? The challenge ahead for aerial imaging

Cartographic aerial cameras continue to play the key role in producing quality products for the aerial photography business, and specifically for the National Aerial Photography Program (NAPP). One NAPP photograph taken with cameras capable of 39 lp/mm system resolution can contain the equivalent of 432 million pixels at 11 ??m spot size, and the cost is less than $75 per photograph to scan and output the pixels on a magnetic storage medium. On the digital side, solid state charge coupled device linear and area arrays can yield quality resolution (7 to 12 ??m detector size) and a broader dynamic range. If linear arrays are to compete with film cameras, they will require precise attitude and positioning of the aircraft so that the lines of pixels can be unscrambled and put into a suitable homogeneous scene that is acceptable to an interpreter. Area arrays need to be much larger than currently available to image scenes competitive in size with film cameras. Analysis of the relative advantages and disadvantages of the two systems show that the analog approach is more economical at present. However, as arrays become larger, attitude sensors become more refined, global positioning system coordinate readouts become commonplace, and storage capacity becomes more affordable, the digital camera may emerge as the imaging system for the future. Several technical challenges must be overcome if digital sensors are to advance to where they can support mapping, charting, and geographic information system applications.

Photogrammetric Engineering and Remote Sensing↗

Section 4. The GIS Weasel User's Manual

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

Techniques and Methods↗

Flood-inundation maps for a nine-mile reach of the Des Plaines River from Riverwoods to Mettawa, Illinois

Digital flood-inundation maps for a 9-mile reach of the Des Plaines River from Riverwoods to Mettawa, Illinois, were created by the U.S. Geological Survey (USGS) in cooperation with the Lake County Stormwater Management Commission and the Villages of Lincolnshire and Riverwoods. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent of flooding corresponding to selected water levels (gage heights) at the USGS streamgage at Des Plaines River at Lincolnshire, Illinois (station no. 05528100). Current conditions at the USGS streamgage may be obtained on the Internet at http://waterdata.usgs.gov/usa/nwis/uv?05528100 . In addition, this streamgage is incorporated into the Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http://water.weather.gov/ahps/ ) by the National Weather Service (NWS). The NWS forecasts flood hydrographs at many places that are often co-located at USGS streamgages. The NWS forecasted peak-stage information, also shown on the Des Plaines River at Lincolnshire inundation Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was then used to determine seven water-surface profiles for flood stages at roughly 1-ft intervals referenced to the streamgage datum and ranging from the 50- to 0.2-percent annual exceedance probability flows. The simulated water-surface profiles were then combined with a Geographic Information System (GIS) Digital Elevation Model (DEM) (derived from Light Detection And Ranging (LiDAR) data) in order to delineate the area flooded at each water level. These maps, along with information on the Internet regarding current gage height from USGS streamgages and forecasted stream stages from the NWS, provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Illinois↗

How and why Upper Colorado River Basin land, water, and fire managers choose to use drought tools (or not)

On the Western Slope of Colorado, variable climate and precipitation conditions are typical. Periods of drought—which may be defined by lack of water, high temperatures, low soil moisture, or other indicators—cause a range of impacts across sectors, including water, land, and fire management. The Western Slope’s Upper Colorado River Basin (UCRB) was one of the first pilot areas in which the National Integrated Drought Information System (NIDIS) implemented a drought early warning system (DEWS) in 2009. NIDIS presently supports eight regional DEWS; as of 2016, the UCRB DEWS has been incorporated into an expanded Intermountain West (IMW) DEWS. The selection of the UCRB for an initial DEWS reflects the regional importance of drought information for managing water supply for agriculture and other uses, and the need for effective decision support related to drought. Additionally, new drought information products were developed specifically for the UCRB DEWS, and a number of others have been created since 2009, adding to the preexisting toolkit for drought decision making. The various elements of the UCRB drought early warning system can be expected to be more or less suitable for the needs of different decision makers. As a result, the UCRB makes an ideal case study to examine the use of scientific information products and tools in which the broad decision context (managing drought) is defined, but information needs of current and prospective users vary. Thus decision makers will make varied choices about which of the available tools to use or not use, depending on the particular management and institutional context in which they work. This report investigates the factors that affect the choices of decision makers about whether and how to use particular information sources, products, and tools. The investigation focused on the following research questions: What decisions do managers make related to drought in the Upper Colorado region and particularly the Western Slope of Colorado? About which impacts of drought are they most concerned? What indicators and information products do decision makers rely on to manage for the impacts of drought in this region? How do decision makers find out about and choose between available drought information sources, products, and tools? What gaps (if any) do they perceive in currently available drought information and tools? Studies of decision support tools or information sources often concentrate on the known users of a given tool(s). Such an approach can yield useful information; it provides rich insight into the experiences of users and can suggest design modifications to make existing tools more effective. Yet it is not an effective approach to capture the perspectives and needs of prospective tool users or to investigate the factors that affect whether or not someone chooses to use tools in the first place. To overcome this challenge, in this study the author instead used a geographically based sampling strategy in which a range of natural resource managers from preidentified Federal management units and selected State agencies on the Western Slope were considered prospective users of tools. Prospective users were then asked to describe in an open-ended fashion what information and tools they do or do not use and why. This approach allowed for respondents to report both use and nonuse of tools, and thus the ability to identify factors that influence information and tool use choices by managers.

Open-File Report↗

Coastal bathymetry data collected in 2013 from the Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research Project, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys around the northern Chandeleur Islands, Louisiana, in July and August of 2013. The objective of the study is to better understand barrier-island geomorphic evolution, particularly storm-related depositional and erosional processes that shape the islands over annual to interannual timescales (1‒5 years). Collecting geophysical data will allow us to identify relationships between the geologic history of the island and its present day morphology and sediment distribution. This mapping effort was the third in a series of three planned surveys in this area. High resolution geophysical data collected in each of three consecutive years along this rapidly changing barrier island system will provide a unique time-series dataset that will significantly further the analyses and geomorphological interpretations of this and other coastal systems, improving our understanding of coastal response and evolution over short time scales (1‒5 years). This data series includes the geophysical data that were collected during two cruises (USGS Field Activity Numbers (FAN) 13BIM02, 13BIM03, and 13BIM04, in July 2013; and FANs 13BIM07 and 13BIM08 in August 2013) aboard the R/V Sallenger , the R/V Jabba Jaw , and the R/V Shark along the northern portion of the Chandeleur Islands, Breton National Wildlife Refuge, Louisiana. Primary data were acquired with the following equipment: (1) a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz [kHz]), (2) an EdgeTech 424 (4‒24 kHz) chirp sub-bottom profiling system, and (3) two Odom Hydrographic Systems, Incorporated, Echotrach CV100 single beam echosounders. This data series report serves as an archive of processed interferometric swath and single-beam bathymetry data. Geographic information system data products include an interpolated digital elevation model, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Louisiana↗

Tracking animals in freshwater with electronic tags: past, present and future

Considerable technical developments over the past half century have enabled widespread application of electronic tags to the study of animals in the wild, including in freshwater environments. We review the constraints associated with freshwater telemetry and biologging and the technical developments relevant to their use. Technical constraints for tracking animals are often influenced by the characteristics of the animals being studied and the environment they inhabit. Collectively, they influence which and how technologies can be used and their relative effectiveness. Although radio telemetry has historically been the most commonly used technology in freshwater, passive integrated transponder (PIT) technology, acoustic telemetry and biologgers are becoming more popular. Most telemetry studies have focused on fish, although an increasing number have focused on other taxa, such as turtles, crustaceans and molluscs. Key technical developments for freshwater systems include: miniaturization of tags for tracking small-size life stages and species, fixed stations and coded tags for tracking large samples of animals over long distances and large temporal scales, inexpensive PIT systems that enable mass tagging to yield population- and community-level relevant sample sizes, incorporation of sensors into electronic tags, validation of tag attachment procedures with a focus on maintaining animal welfare, incorporation of different techniques (for example, genetics, stable isotopes) and peripheral technologies (for example, geographic information systems, hydroacoustics), development of novel analytical techniques, and extensive international collaboration. Innovations are still needed in tag miniaturization, data analysis and visualization, and in tracking animals over larger spatial scales (for example, pelagic areas of lakes) and in challenging environments (for example, large dynamic floodplain systems, under ice). There seems to be a particular need for adapting various global positioning system and satellite tagging approaches to freshwater. Electronic tagging provides a mechanism to collect detailed information from imperilled animals and species that have no direct economic value. Current and future advances will continue to improve our knowledge of the natural history of aquatic animals and ecological processes in freshwater ecosystems while facilitating evidence-based resource management and conservation.

Animal Biotelemetry↗

Impacts of flowering rush (Butomus umbellatus L.) on macrophyte diversity and composition in the Upper Mississippi River

Flowering rush ( Butomus umbellatus L.), a perennial plant native to Eurasia, made a widespread appearance in the Upper Mississippi River in the United States in 2020, following extremely high river discharge during the previous year. Flowering rush expanded rapidly and was found at 1–10% of sites (n = 6,630 total sites) across a 400 km river reach within the first 4 years of invasion. Flowering rush invaded at least 12 of 31 wetland vegetation classes, including submersed aquatic, rooted-floating, deep marsh, and shallow marsh. Analysis of long-term macrophyte data and our targeted field study revealed that plant diversity declined with greater abundance of flowering rush over a 4-year early invasion period, suggesting that native species were displaced. Furthermore, species correlation plots showed a significant negative correlation (r < -0.1) between flowering rush and several native species, including wild celery, water stargrass, and wild rice. Non-metric multi-dimensional scaling (NMDS) ordination placed flowering rush near the center of the plot, which may indicate tolerance to a wide range of environmental conditions such as water depth, flow, and substrate. Centering on the NMDS plot also shows that flowering rush invades many types of vegetated aquatic land cover classes, which was also supported by our geographic information systems analysis of land cover invasion. These habitat associations and ecological impacts of the recent, widespread invasion of flowering rush in the Upper Mississippi River can help inform restoration and management actions during early invasion. Continuing long-term data collection can break limitations on modeling cause-effect relationships and provide insights to the future ecological trajectory of the macrophyte community to this non-native invasive species.

Illinois, Iowa, Minnesota, Wisconsin↗

Operating the EOSDIS at the land processes DAAC managing expectations, requirements, and performance across agencies, missions, instruments, systems, and user communities

NASA developed the Earth Observing System (EOS) during the 1990'S. At the Land Processes Distributed Active Archive Center (LP DAAC), located at the USGS EROS Data Center, the EOS Data and Information System (EOSDIS) is required to support heritage missions as well as Landsat 7, Terra, and Aqua. The original system concept of the early 1990'S changed as each community had its say - first the managers, then engineers, scientists, developers, operators, and then finally the general public. The systems at the LP DAAC - particularly the largest single system, the EOSDIS Core System (ECS) - are changing as experience accumulates, technology changes, and each user group gains influence. The LP DAAC has adapted as contingencies were planned for, requirements and therefore plans were modified, and expectations changed faster than requirements could hope to be satisfied. Although not responsible for Quality Assurance of the science data, the LP DAAC works to ensure the data are accessible and useable by influencing systems, capabilities, and data formats where possible, and providing tools and user support as necessary. While supporting multiple missions and instruments, the LP DAAC also works with and learns from multiple management and oversight groups as they review mission requirements, system capabilities, and the overall operation of the LP DAAC. Stakeholders, including the Land Science community, are consulted regularly to ensure that the LP DAAC remains cognizant and responsive to the evolving needs of the user community. Today, the systems do not look or function as originally planned, but they do work, and they allow customers to search and order of an impressive amount of diverse data.

Conference Paper↗