Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Frontiers in Earth Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,612 records · Page 35Linked to original sources
USGS2024

Using a time-of-travel sampling approach to quantify per- and polyfluoroalkyl substances (PFAS) stream loading and source inputs in a mixed-source, urban catchment

Understanding per- and polyfluoroalkyl substances (PFAS) mass distribution in surface and groundwater systems can support source prioritization, load reduction, and water management. Thirteen sites within an urban catchment were sampled utilizing a time-of-travel sampling approach to minimize the influence of subdaily fluctuations in mass from PFAS point sources and to quantify PFAS and ancillary chemical loads from various PFAS sources. A larger increase in perfluoroalkyl sulfonate (PFSA) loads (8 to 11 μg/s, up to 618%) than in perfluoroalkyl carboxylate (PFCA) loads (no change to 3.4 μg/s, up to 122%) was observed at sites below tributaries influenced by military bases with known groundwater discharge. Point discharges from two sewage treatment plants (STPs) resulted in increases in PFCA and PFSA loads that were similar (6 and 10 μg/s respectively) below the first STP and greater for PFCA compared to PFSA loads (23 and 13 μg/s respectively) below the second STP. Overall, percent increases in total PFAS load ranged from 20 to 277% for military base inputs and 44 to 77% for STP inputs. A focus catchment that represents only 14% (76.9 km 2 ) of the drainage area at the most downstream site (544 km 2 ) accounted for about 70% of PFSA and 40% of PFCA loads observed at the most downstream site. Results show that by using a time-of-travel sampling approach in mixed, urban settings with several PFAS sources, it is possible to quantify stream loads from individual PFAS sources, thereby improving source attribution and providing actionable data for water-resource managers.

ACS ES&T Water↗
USGS2024

A seismic nodal deployment to understand magmatic structure in the vicinity of the Pahala earthquake swarm

In summer-fall 2022, 80 three-component SmartSolo IGU-BD3C-5 nodal seismometers were deployed surrounding the Pāhala seismic swarm on the Island of Hawaiʻi, with the goal of improving seismicity catalogs, and seismic velocity images of the crust and upper mantle in this region. The Pāhala swarm, located south of Mauna Loa and Kīlauea, has been the site of a multiyear sustained swarm of seismicity at depths of ~ 25 – 40 km, with order of magnitude increases in rate in 2015, and then again in 2019. This seismicity is possibly related to the input of magma from the mantle plume below, which may then be subsequently transported to volcanic edifices. However, these processes remain enigmatic, in part due to a lack of precise earthquake locations and seismic velocity models in this region. Here we provide an overview of the deployment, an assessment of the quality of the collected data, and discuss the viability of the dataset for local earthquake relocation, tomography, and teleseismic receiver functions. Through comparisons with proximal permanent broadband and short period instruments, we find that the nodes produce high quality data, particularly at periods shorter than 5 s, although we find, document, and correct discrepancies with the gain and polarities of the instruments. We successfully record signals from teleseismic earthquakes, even at periods longer than 5 s (the corner of the flat response of the nodes). We also record local earthquakes, including details related to source characteristics. This indicates that the data is likely to prove useful for investigations using both local and teleseismic earthquake signals to better understand the connections between the deep and shallow magmatic systems of Hawaiʻi. While this deployment provides a snapshot in time, its success may provide a useful benchmark for future studies as the volcanic systems of Hawaiʻi continue to evolve in the future.

Hawaii↗
USGS2026

Water-withdrawal and groundwater-level fluctuations, physical and infiltration characteristics of Ohio River sediment, and isotope-based estimates of water sources relative to a riverbank filtration system in an alluvial aquifer, Louisville, Kentucky, 2000–20

The U.S. Geological Survey and the Louisville Water Company, from 2000 to 2020, cooperatively investigated physical and hydrologic conditions in the Ohio River alluvial aquifer and adjacent riverbed sediments in the northeast part of Louisville, Kentucky, to increase knowledge of processes affecting water sources to collector wells during operation of a riverbank filtration system (RBF). The RBF, in 2020, included an initial collector well (CW1) completed in 1999 and a tunnel and collector well system (TCWS) composed of four collector wells (CW2–CW5) completed in late 2010 that were connected by a tunnel that routed water to a pumping station and a treatment plant. Daily mean water-withdrawal rates typically ranged from about 10.4 to 20.7 million gallons per day (Mgal/d) from 2005 to 2007, then were cyclic from 2008 to 2010 and ranged from as low as about 9 to 13 Mgal/d in winter-spring months up to about 19 to 20 Mgal/d in summer-autumn months. From 2011 through 2017, peak daily mean water-withdrawal rates from CW2–CW5 fluctuated between winter-spring lows of about 20–30 Mgal/d to summer-autumn peak rates of about 41.6 Mgal/d in 2013 to about 48.2 Mgal/d in 2012. From 2017 to 2020, TCWS peak daily mean water-withdrawal rates decreased from about 45.7 Mgal/d in 2017 to about 37.5 Mgal/d in 2020 and peak daily mean rates from CW1 ranged from about 20.7 Mgal/d in 2020 to about 21.6 Mgal/d in 2018. Periods in 2019–20 with tunnel pumping station daily mean water-withdrawal rates smaller than about 30 Mgal/d had generally stable water levels in CW2 and indicated the sustainable yield of the TCWS collector wells under the prevailing hydrologic conditions. Drawdown during July–August of 2008 and 2009 was associated with CW1, the sole operating collector well. Groundwater-flow directions outside the CW1 cone of depression during July–August of 2008 and 2009 were from areas near the alluvial valley margin toward the Ohio River and in 2009 toward Harrods Creek. Collector wells CW2 through CW5 derived water during 2011–19 surveys from surface-water infiltration, as indicated by drawdown that extended beneath the Ohio River and Harrods Creek. Increases in drawdown toward the alluvial valley margins in July–August of 2013 and 2015, compared with July 2011, indicated less available recharge from those flow directions and decreased yield of groundwater from the aquifer after progressively longer TCWS water withdrawals. Drawdown at CW2–CW5 and at observation wells between them lessened in October 2019 and indicated that onshore groundwater levels can recover when collector well withdrawals decrease. Overlapping cones of depression in 2011–15 potentiometric surfaces centered around CW2, CW3, CW4, and CW5, and drawdown along divides between those wells indicated well interference between collector wells. Well-interference effects increased during 2013 and 2015 survey periods, despite decreased water-withdrawal rates compared with July 2011, and expanded to include CW1 when its use resumed. Groundwater-level fluctuations in observation wells near the Ohio River were consistent with gradual depletion of groundwater yield during tunnel pumping station operation at river elevations of about 420 feet above the National Geodetic Vertical Datum of 1929 (NGVD 29) and enhanced recharge of the aquifer when river elevations were above flood stage of about 430 feet above NGVD 29. Groundwater-level declines in observation wells near the Ohio River were most apparent in summer and some autumn months between 2012 and 2017 during periods when tunnel pumping station mean daily water-withdrawal rates were about 35 Mgal/d or more. Periods of relatively stable groundwater levels during 2019–20 in observation wells between CW2–CW5, when tunnel pumping station water-withdrawal rates were about 30–33 Mgal/d or less, also indicated that the prevailing sustainable yield was about 30 Mgal/d or less. Wells associated with CW3 and CW4 had the largest increases in slopes of best-fit lines relating water-level difference to water-withdrawal rate between 2012 and 2020, an indication of decreased efficiencies of those wells to supply water or of changes in groundwater yield around the well. Increased slopes of best-fit lines relating water-level difference to water-withdrawal rate from 2019 to 2020, when groundwater levels were otherwise relatively stable, also indicated that the specific capacity of one or more TCWS collector wells may have declined during that period. Riverbed surface elevation, roughness, and hardness changes between hydroacoustic surveys indicated active accretion and erosion of bed sediment offshore from the riverbank filtration system in 2002–4. Riverbed hydraulic conductivity computed from 2013 to 2015 in tests at 11 sites ranged from 0.2 to 230 feet per day. Ten temporary piezometer sites with adjacent operating collector wells had drawdowns that ranged from about 4 to 11.7 feet and hammer blows greater than or equal to 49 counts, which indicated a relatively great density of alluvial sediments and the potential for diminished riverbed infiltration rates. Contributions of Ohio River infiltration to collector wells estimated from deuterium and oxygen-18 isotopic ratios in representative Ohio River and groundwater samples were considerably larger in warmer months than cooler months and ranged from 80–90 percent in CW1–CW5 in May 2020 to 100 percent in May 2019 at CW2, CW4, and CW5. Groundwater contributions to water withdrawals by collector wells increased in cooler autumn months and ranged from 40 percent at CW3 and CW5 in November 2020 to 70 percent at CW2, CW4, and CW5 in November–December 2019. November 2019 and November 2020 isotopic compositions of water from the collector wells had enriched deuterium and oxygen-18 isotopic ratios consistent with mixtures of evaporation-modified water from the Ohio River and meteoric-origin groundwater.

Indiana, Kentucky↗
USGS2024

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment↗
USGS2025

Comparative assessment of a restored and natural wetland using 13C-DNA SIP reveals a higher potential for methane production in the restored wetland

Wetlands are the largest natural source of methane (CH 4 ), a potent greenhouse gas produced by methanogens. Methanogenesis rates are controlled by environmental factors such as redox potential, temperature, and carbon and electron acceptor availability and are presumably dependent on the composition of the active methanogen community. We collected intact soil cores from a restored and natural freshwater depressional wetland on Maryland’s Delmarva Peninsula (USA) to assess the effects of wetland restoration and redox shifts on microbial processes. Intact soil cores were incubated under either saturated (anoxic) or unsaturated (oxic) conditions and amended with 13 C-acetate for quantitative stable isotope probing (qSIP) of the 16S rRNA gene. Restored wetland cores supported a distinct community of methanogens compared to natural cores, and acetoclastic methanogens putatively identified in the genus Methanosarcina were among the most abundant taxa in restored anoxic and oxic cores. The active microbial communities in the restored wetland cores were also distinguished by the unique presence of facultatively anaerobic bacteria belonging to the orders Firmicutes and Bacteroidetes . In natural wetland incubations, methanogen populations were not among the most abundant taxa, and these communities were instead distinguished by the unique presence of aerobic bacteria in the phyla Acidobacteria , Actinobacteria , and class Alphaproteobacteria . Iron-reducing bacteria, in the genus Geobacter , were active across all redox conditions in both the restored and the natural cores, except the natural oxic–anoxic condition. These findings suggest an overall higher potential for methanogenesis in the restored wetland site compared to the natural wetland site, even when there is evidence of Fe reduction.

Maryland↗
USGS2025

Base-flow sampling to enhance understanding of the groundwater flow component of nitrogen loading in small watersheds draining into Long Island Sound

Excessive nitrogen discharge is a major concern for the Long Island Sound. Programs have been implemented to reduce point sources of nitrogen to the sound, but little is known about the nonpoint sources. This study aims to better understand the current groundwater contributions of nitrogen from nonpoint sources in the Long Island Sound watershed. During the spring and summer of 2022, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, collected water-quality samples to analyze nutrients (nitrogen and phosphorus), chloride, and bromide at 45 stations in the Long Island Sound watershed in Connecticut, New York, and Rhode Island. The stations were in small drainage watersheds (5 to 30 square kilometers) in the southern part of the Long Island Sound watershed. During two separate synoptic sampling events, water-quality samples and instantaneous streamflow measurements were collected under base-flow conditions (where the streamflow is dominated by groundwater inputs rather than overland flow or runoff flow). One sampling event was in the nongrowing season (April 24–25, 2022), and the other was in the growing season (June 30–July 1, 2022). To calculate instantaneous nitrogen loads and yields, streamflow was measured at the time of sample collection. Nitrogen concentrations, loads, and yields varied among sampling stations and by season. Total filtered nitrogen concentrations were generally lower in the nongrowing season (from less than 0.14 to 1.9 milligrams per liter) than in the growing season (from less than 0.23 to 3.0 milligrams per liter). Nitrate plus nitrite concentrations showed little variation between the nongrowing and growing seasons. Unfiltered ammonia plus organic nitrogen concentrations were generally lower in the nongrowing season (from less than 0.07 to 0.83 milligram per liter) than in the growing season (from 0.11 to 0.98 milligram per liter). In contrast, total filtered and unfiltered nitrogen loads and yields were higher in the nongrowing season than during the growing season, likely because streamflows were higher during the nongrowing season. Total unfiltered nitrogen yields during the nongrowing season ranged from less than 0.15 to 5.0 kilograms per square kilometer per day. Total unfiltered nitrogen yields during the growing season ranged from less than 0.12 to 2.5 kilograms per square kilometer per day. Total filtered nitrogen yields during the nongrowing season ranged from less than 0.13 to 5.2 kilograms per square kilometer per day. Total filtered nitrogen yields during the growing season ranged from less than 0.06 to 2.5 kilograms per square kilometer per day.

Connecticut, New York, Rhode Island↗
USGS2025

Preserving and increasing water resources—Natural infrastructure in dryland streams in Baja California Sur, Mexico

The Los Planes watershed of Baja California Sur, Mexico, and its underlying aquifer are experiencing groundwater decline owing to low average annual rainfall (28.1 centimeters per year) and rising water demand from population growth and agricultural activities. This decline in water availability can lead to desertification—a process that changes arable land to desert by degrading soil and vegetation—and can pose serious challenges to livelihoods that depend on the land. To address these issues, a ranch in the Los Planes watershed has installed many natural infrastructures in dryland streams (NIDS) in channels for soil and water conservation. In 2022, the U.S. Geological Survey (USGS) began working with regional researchers and land managers to investigate the effects of NIDS on natural biological, geochemical, and physical processes and determine the efficacy of NIDS for water augmentation in the Los Planes watershed. The USGS also worked with local academic institutions and nonprofit organizations to create public educational opportunities focused on the area’s hydrogeology. These and other collaborative efforts with the U.S. Water Partnership and Innovaciones Alumbra aim at enhancing water resources in the Baja California Sur region and promoting water security and safeguarding community well-being. Resume La cuenca de Los Planes, ubicada en Baja California Sur, México, y su acuífero subyacente, están sufriendo una disminución de las aguas subterráneas debido a la baja precipitación media anual (28.1 centímetros por año) y la alta demanda de agua por parte de una población creciente y la actividad agrícola. Esta disminución de la disponibilidad de agua puede conducir a la desertificación—un proceso que por medio de la degradación del suelo y la vegetación convierte a la tierra cultivable en desierto—representando un serio desafío para los medios de vida de las personas. Para abordar estos problemas, un rancho en la cuenca de Los Planes ha instalado numerosas obras de Infraestructura Natural en Arroyos de Tierras Áridas (INATS) para conservación del suelo y del agua. En 2022, el Servicio Geológico de los Estados Unidos (USGS, por sus siglas en inglés) comenzó a trabajar con investigadores regionales y gestores de tierras para estudiar los efectos de INATS en los procesos biológicos, geoquímicos y físicos, y determinar su eficacia en el aumento de los recursos hídricos en la cuenca de Los Planes. El USGS se ha asociado con instituciones académicas y organizaciones locales sin fines de lucro para crear oportunidades educativas públicas centradas en la hidrogeología de la zona. Estos y otros esfuerzos colaborativos con la Asociación del Agua de Estados Unidos (U.S. Water Partnership) e Innovaciones Alumbra, tienen como objetivo mejorar el uso de los recursos hídricos en la región de Baja California Sur, promover la seguridad hídrica y proteger el bienestar de la comunidad.

Baja California Sur↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

Characterization of stream water quality and groundwater levels in the Central Pine Barrens region, Suffolk County, New York, 2017–23

The area locally known as the “Central Pine Barrens” region, located in Suffolk County, New York, contains most of Long Island’s preserved and undeveloped land. This region overlays an aquifer system that provides potable groundwater for residents of Suffolk County. Between 2017 and 2023, the U.S. Geological Survey, in cooperation with the Central Pine Barrens Joint Planning & Policy Commission and the Town of Brookhaven, monitored groundwater levels and stream water quality in this region. Groundwater levels were measured monthly at five wells and continuously (15-minute intervals) at a sixth well. Water quality was monitored at five locations in the Carmans River and at two locations in the Peconic River, and samples were analyzed for major ions, trace elements, nutrients, pharmaceuticals, and pesticides. The major ion compositions at the sites were mainly sodium-chloride type waters, and compositions varied the most at the furthest upstream sites in both streams. Concentrations above aquatic-life criteria thresholds also occurred most frequently at the furthest upstream sites. The seasonal patterns of nutrient loads and concentrations varied between the Carmans and Peconic Rivers. Several organic compounds including pharmaceuticals, domestic use products, and pesticides were detected at low concentrations in both streams. Metformin was the most frequently detected pharmaceutical compound, and herbicides were the most frequently detected pesticide class. Water-quality conditions influenced by anthropogenic contributions are a result of current and historical land use, and these contributions include onsite wastewater disposal systems, commercial or domestic fertilizers and pesticides, and urban or industrial contaminants in road runoff. This study characterizes and improves understanding of the current hydrologic conditions in the Central Pine Barrens region and the study findings can help inform the development of plans to manage, protect, and restore water resources.

New York↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS1983

Technique for estimating depth of floods in Tennessee

Estimates of flood depths are needed for design of roadways across flood plains and for other types of construction along streams. Equations for estimating flood depths in Tennessee were derived using data for 150 gaging stations. The equations are based on drainage basin size and can be used to estimate depths of the 10-year and 100-year floods for four hydrologic areas. A method also was developed for estimating depth of floods having recurrence intervals between 10 and 100 years. Standard errors range from 22 to 30 percent for the 10-year depth equations and from 23 to 30 percent for the 100-year depth equations.

Tennessee↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2025

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York and near coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York and near coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater inundation or groundwater emergence flooding. The latter refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As part of a comprehensive study of compound flood hazards in the near coastal areas surrounding Long Island and Long Island Sound, a spatial analysis was completed, in cooperation with the Environmental Protection Agency’s Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 900-meter by 900-meter (approximately 3,000-feet by 3,000-feet) grid cells, for the purposes of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard rank was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percent of area within each cell with slow infiltrating soils. A higher sea level position scenario was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard rank was reviewed in concert with the National Land Cover Data Base to identify developed areas and associated infrastructure that may be at risk to groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface water bodies are not likely to be exposed to groundwater emergence flooding. For Long Island, under a scenario with higher sea level position, a greater groundwater emergence flood hazard is calculated in some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea level condition and a higher sea level position scenario.

EarthArXiv↗
USGS1976

Solute transport and modeling of water quality in a small stream

An injection of chloride, sodium, and stable strontium was made at a constant rate for 3 hours into Uvas Creek, Santa Clara County, Calif., to determine the mass transport processes in a small stream. Five observation points were selected within a 610-metre reach of the stream below the injection site. Water samples were collected at the observation points during and immediately after the injection. A mathematical model of the stream was obtained by solving analytically and optimally the one-dimensional mass transport equation of the solutes in the stream. Comparison of field results with a simplified mathematical model indicates the dominance of convection in the behavior of sodium and chloride. The concentration of chloride and sodium can be closely simulated by the model. However, strontium cannot be well represented by the simplified model, which contains a first-order decay-type sink.

California↗
USGS2026

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota↗
USGS2025

Data gap analysis for estimation of agricultural return flows in the Upper Gunnison River Basin, Colorado

The Gunnison River and many tributaries in the Upper Gunnison River Basin provide water to irrigate agricultural crops. The application of irrigation water can recharge some aquifers locally by water percolating below the root zone and eventually flowing back to the stream or river through the subsurface. Diverting surface water for irrigation reduces streamflow during the irrigation season but can provide temporary storage of water and supplement streamflow after the snowmelt runoff season. Understanding the timing and quantity of agricultural return flows could help resource managers make informed decisions and adapt to potential changes in water management and availability that could affect irrigation practices. In 2024, the U.S. Geological Survey, in cooperation with the Upper Gunnison River Water Conservancy District, began a study to characterize agricultural return flows in the Upper Gunnison River Basin by using endmember mixing analysis and developing a groundwater model. Both approaches require data from multiple sources, but data gaps exist in the East River study reach and other reaches of interest (Ohio Creek, Tomichi Creek, and Cochetopa Creek). The East River Basin, which is the initial focus of the study, has fewer data gaps than the other basins. Data gaps could be addressed by installing additional surface water and groundwater monitoring sites, making regular streamflow measurements on tributaries, and completing tests to characterize local aquifer properties.

Colorado↗
USGS2025

2024 Surprise Inlet landslides: Insights from a prototype landslide‐triggered tsunami monitoring system in Prince William Sound, Alaska

Alaska's coastal communities face growing landslide hazards owing to glacier retreat and extreme weather intensified by the warming climate, yet hazard monitoring remains challenging. As part of ongoing experimental monitoring in Prince William Sound, we detected three large landslides (0.5–2.3 M m 3 ) at Surprise Inlet on 20 September 2024, within the span of an hour. These events were identified in near real-time through seismic data and later confirmed using satellite imagery, tidal records, and infrasound. The landslides generated a modest tsunami, and a 4 cm wave was recorded by a tide gauge 18 km away, marking the first recorded landslide to reach water since monitoring began in this region in 2021. Here, we examine the detection and interpretation of these landslides using multiple data sources and modeling. We demonstrate the effectiveness of this regional seismic monitoring system and show how complementary instrumentation, where available, can enhance detection capabilities.

Alaska↗