Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Coast and Ocean”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Geology and ground-water resources of the islands of Lanai and Kahoolawe, Hawaii

Lanai lies 59 miles southeast of Honolulu, Oahu, has an area of 141 square miles, and is 3,370 feet high. (See fig. 1 and pl. 1.) Lanai City is the only town of importance. The island produces pineapples and cattle. The surface above about 1,200 feet is generally covered with lateritic soil, which reaches a maximum depth of about 50 feet. Below this level the island is partly devoid of vegetation and is strewn with boulders, the result of having been once submerged by the ocean to this depth. Traces of various emerged and submerged shore lines are described, the highest fossiliferous marine deposits being 1,070 feet above sea level. Lanai is an eroded extinct basaltic volcano built during one period of activity. No secondary eruptions occurred as on most of the other islands. It has three rift zones and a summit caldera. The summit plateau has resulted from collapse along the northwest rift zone. Elsewhere there is much evidence of faulting. About 100 faults and 275 dikes were recorded, but they are so close together in places that it was not possible to show them all on the map. The climate is semitropical, the mean annual temperature of Lanai City, altitude 1,620 feet, being 68° F. Because Lanai lies to the lee of Maui Island it is dry. The mean annual rainfall ranges from 38 inches on the summit to less than 10 inches on the coast. The windward (northeast) side is carved by streams into deep canyons. Maunalei Gulch has the only perennial stream, and it does not reach the sea. Ground water, the lifeblood of Lanai is scarce. Lanai City obtains some of its water supply by a tunnel from gravel in Maumalei Gulch. This water apparently rises from the dike complex in this gulch. The rest of the supply comes from a recently constructed shaft tapping the dike complex not far downstream. The total quantity of high-level ground water discharged by springs and tunnels ranges from about 600,000 gallons a day in wet weather to about 250,000 gallons a day in dry weather. The basal water, although potable, is fairly high in salt. Several sites are recommended for developing and conserving ground water. Kahoolawe Island is 11 miles long, 6 miles wide, 1,491 feet high, covers 45 square miles, and lies 94 miles southeast of Honolulu and 6 3 / 4 miles southwest of Maui. It is a shield-shaped extinct volcano composed chiefly of thin flows of primitive basalt poured in rapid succession from three rift zones and a vent at their intersection. At one stage the volcano was indented with a caldera about 3 miles across which was later completely filled. A graben led southwestward from it. The rocks are divided into Late Tertiary (?) or early Pleistocene(?) pre-caldera basalts, caldera-filling basalts and basaltic andesites, post-caldera basalts and andesites, and Recent post erosional basalts. A few thin vitric tuff beds and cinder cones were found. Marine erosion has cut cliffs as high as 800 feet along the east and south shores and exposed a cross section of the caldera. Only shallow ephemeral gulches exist. The entire summit has been eroded to a hard-pan surface by the wind as a result of the vegetation being destroyed by livestock. The island is semi-arid and well water is needed for stook: "The stook is now supplied entirely from storage of rain and flood waters. During droughts water is hauled by boat from the island of Maui. All the wells dug so far yield water that is too brackish for stock except at the fairly inaccessible south side of Kanapou Bay. The resistivity survey indicates a water table 1.5 feet or less above sea level for 2.25 miles inland. A few sites for wells are recommended in the dike complex where small supplies of water suitable for stock might be found. Petrographic studies by Gordon A. Macdonald indicate that the pre-caldera and caldera-filling lavas are largely normal olivine basalt of the type which forms the bulk of all Hawaiian volcanoes thus far investigated. It represents the undifferentiated magma of the Hawaiian petrographic province. Toward the close of the caldera-filling epoch the vent became less active, and magmatic differentiation produced basaltic andesites, which are interbedded with normal basalts. The post-caldera lavas are largely basaltic andesites and andesites. The much younger lavas, erupted after a period of extensive erosion, are olivine basalts similar in composition to the pre-caldera flows. The mineralogy of the Kahoolawe rocks is described in detail.

Hawaii↗

Nodal tidal cycle of 18.6 yr.: Its importance in sea-level curves of the east coast of the United States and its value in explaining long-term sea-level changes

The 18.6-yr cycle of the Moon's nodes dominates the annual means of high water, low water, and range at Boston and at other East Coast harbors. The maxima and minima of the high-water and range curves agree closely with the 180° and 0° long. yr, respectively, of the Moon's ascending node, and are fairly well accounted for by tide-prediction equations. The curve of annual mean sea level also reflects the cycle, but more weakly. Recognition of the cyclical nature of tidal data both simplifies and clarifies assessments of longer term sea-level trends and points to the need to include only multiples of entire cycles in the computations of these trends. When the curves of mean high water and range are used, it is possible to recognize long-term sea-level trends rapidly and to determine whether these are attributable to tidal or nontidal causes. The data suggest that the secular sea-level rise during the 20th century is tidal in origin and may be caused by vertical movement of the oceanic floor. This has the effect of reducing the volume of ocean basins, and, by changing basin geometry, alters the characteristics of terrestrial tidal constituents (standing waves).

Atlantic Ocean↗

Characterizing the catastrophic 2017 Mud Creek Landslide, California, using repeat Structure-from-Motion (SfM) photogrammetry

Along the rugged coast of Big Sur, California, the Mud Creek landslide failed catastrophically on May 20, 2017 and destroyed over 400 m of scenic California State Highway 1. We collected structure-from-motion (SfM) photogrammetry data using airborne platforms that, when combined with existing airborne lidar data, revealed that the area exhibited significant topographic change and displacement before, during and after the catastrophic failure. Before the catastrophic failure we document two areas of elevated change in the zone of depletion, which aligned with the double-peaked head scarp produced by the catastrophic failure. The catastrophic failure extended from 337 m elevation to at least 8 m below sea level, was 490 m wide, displaced ~3 million m3 of earth and rock, and deposited landslide debris at least 175 m seaward of the original shoreline. The failure was not a complete slope-clearing event, however, and several upslope and lateral regions that did not slip into the ocean exhibited significant displacement and topographic change during the days and months after catastrophic failure. Additionally, we use the post-slide data to quantify several other processes, including the time-varying rates of talus accumulation and coastal erosion of the landslide toe. We conclude that repeat SfM surveys from aerial imagery can provide valuable information about landslide evolution and the potential for deep-seated landslide hazards – especially in the lead up to catastrophic failure – if photos are collected and processed regularly.

California↗

Geology and ground-water resources of the island of Oahu, Hawaii

Oahu, one of the islands of the Hawaiian group, lies in the Mid-Pacific 2,100 miles southwest of San Francisco. The principal city is Honolulu. The Koolau Range makes up the eastern part of the island, and the Waianae Range the western part. Both are extinct basaltic volcanoes deeply dissected by erosion. The Koolau Volcano was the later to become extinct. The Waianae Range is made up of three groups of lavas erupted in Tertiary and possibly in early Pleistocene time. The exposed part of the older lava is nearly 2,000 feet thick and consists largely of thin-bedded pahoehoe. It is separated in most places from the middle lavas by an angular unconformity and talus breccia and in a few places by an erosional unconformity. The middle basalts are about 2,000 feet thick and closely resemble the lower ones except that they contain more aa. The upper lavas reach a thickness of about 2,300 feet and are mostly massive aa flows. The last eruptions produced large cinder cones and some nephelite basalts. The Waianae Volcano, like other Hawaiian volcanoes, produced only small amounts of ash, and the lavas were largely extruded from fissures a few feet wide, now occupied by dikes. The center of activity was near Kolekole Pass, at the head of Lualualei Valley. The Koolau Volcano is made up of two groups of lavas extruded in Tertiary and early Pleistocene (?) time. The older group, the Kailua volcanic series, is greatly altered by hydrothermal action and was extruded from fissures near Lanikai. The flows of the younger group, the Koolau volcanic series, were extruded from fissures about a mile south of the Kailua rift and have an exposed thickness of about 3,000 feet. The Koolau Volcano produced even less ash than the Waianae Volcano, and its flows are thin-bedded pahoehoe and aa. The eruptive center of the Koolau Volcano lies between Kaneohe and Waimanalo. Great amounts of both the Waianae and Koolau Ranges were removed by fluvial and marine erosion during the Pleistocene. The master streams are characterized by deep amphitheater-headed valleys. After this erosion cycle the island was submerged more than 1,200 feet, and these great valleys were drowned and alluviated. Besides this submergence, several strand lines, preserved up to 100 feet above present sea level occur, which may be due to world-wide changes in sea level in response to the withdrawal and restoration of water concurrent with the advances and recessions of the polar ice caps and to accompanying changes in the ocean floor. During this time of shifting ocean levels spasmodic eruptions occurred on the southeast end of the Koolau Range, producing numerous lava flows and tuff cones, most of which are nephelite basalt. The last of these eruptions occurred in Recent time. A description of the climate, rates of run-off, and results of experiments to determine evaporation and transpiration in the areas of high rainfall are given. It was found that the consumptive use decreases materially and becomes a very small percentage of the rainfall in the areas of high precipitation. The lava rocks of the island are very permeable and, because of a rainfall reaching a maximum of 300 inches a year, carry large amounts of ground water, confined and unconfined, basal and perched. The basal ground water floats on salt water because of its lower specific gravity. Consequently for each foot the water table stands above sea level, salt water lies about 42 feet below sea level, in accordance with the sea along the coast as basal ground water. In most places the lava rocks along the shore are overlain by an impermeable or nearly impermeable caprock consisting of submerged lateritic soils and marine noncalcareous sediments. These deposits retard the escape of basal ground water into the sea and give rise to artesian water, but unlike most other artesian systems, this one has no lower restraining formation. The artesian water is the principal source of domestic, municipal, and irrigation supplies. The average annual quantity pumped for the period 1928 to 1933 amounted to about 105,000,000,000 gallons, nearly 90 percent of which came from Koolau hasalt and the remainder from Waianae basalt. There are ten artesian areas in the Koolau Range and two in the Waianae Range. Hydraulic gradients in these basins were found to range from 1.2 to 3 feet to the mile. Because of these extremely flat gradients and the high permeability of the aquifers it is possible to reverse the hydraulic gradients by draft and make the water flow from one artesian area to another. The artesian water levels fluctuate in response to seasonal variations in draft and recharge and in a lesser way to tidal, barometric, and seismic pressures. The water, as shown by chemical analysis, is of excellent quality except where it is contaminated with sea water. Methods have been devised for freshening wells that have gone salty, for detecting leaks, for sealing leaky and defective wells, and for recharging the artesian basins. Owing to the danger of the wells becoming brackish with increased draft, it is believed that further large developments will be more successful if shafts are sunk to sea level in the basalt as far inland as practicable, and tunnels are driven from the bottom of the shafts near the top of the saturated zone. Favorable places for such development exist in Honolulu. In addition to the basal water in the volcanic rocks, water is found in the recent gravel, beach, and dune deposits, and the emerged reef limestone. This water has been recovered by wells and tunnels, and there are favorable localities for developing additional water of this type. The island contains two types of basal springs—those like the Pearl Harbor Springs, which issue from basalt and are supplied by overflow and leakage from the artesian basin, and those which issue from the coastal-plain sediments and are mainly return irrigation water. The total quantity of basal ground water issuing as springs is estimated to be 100,000,000 gallons a day. Ground water occurs at high levels, confined by dikes and perched on tuff, alluvium, and soil beds. These structures give rise to innumerable high-level springs. In the Koolau Range 60 tunnels yield about 33,000,000 gallons daily, of which about 95 percent is obtained from tunnels penetrating the dike complex of the Koolau volcanic series, about 2 percent from tunnels entering post-Koolau ash or tuff deposits, and the remainder from tunnels whose geologic relations are not certainly known. The average daily yield of the tunnels that recover dike water is 2,330 gallons a foot, but the average daily yield of the tunnels in post-Koolau tuff is 450 gallons a foot, and that of the tunnels in alluvium or soil is only 23 gallons a foot. Owing largely to the much lower rainfall on the Waianac Range, its 35 tunnels (not including two new tunnels under construction) yield only about 2,400,000 gallons daily, about 94 percent of which is believed to be obtained from dike systems. The average daily yield of the tunnels in this range that are supplied by dike systems is 581 gallons a foot, as compared to 5 gallons a foot from tunnels in ash or tuff. An extensive tunnel system is proposed to develop a large supply of high-level water for Honolulu from the dike complex of the Koolau series, and high-level water can be recovered by tunnels at many other places. The average daily discharge of all high-level springs in the Koolau Range is about 58,000,000 gallons, of which about 94 percent comes from the Koolau dike complex and about 6 percent from post-Koolau volcanic rocks. The average daily discharge of all high-level springs in the Waianae Range is about 500,000 gallons of which about 81 percent issues from the dike complex.

Hawaii↗

Synopsis of strontium isotope variations in groundwater at Aspo, southern Sweden

Strontium isotope ratios are used to identify end-member ground-water compositions at Aspo in southeastern Sweden where the Hard Rock Laboratory (HRL) has been constructed to evaluate the suitability of crystalline rock for the geologic disposal of nuclear waste. The Hard Rock Laboratory is a decline (tunnel) constructed in 1.8 Ga-old granitic rock that forms islands in an archipelago along the Swedish coast. Ground-water samples were obtained for isotopic analyses from boreholes drilled from the surface and from side boreholes drilled within the HRL. Infiltration at Aspo occurs primarily through fractures zones in the granitic bedrock beneath thin soils throughout the area. Because of extremely low Sr concentrations, rain and snow are not important contributors to the Sr isotope budget of the ground-water system. At shallow levels, water percolating downward along fractures and fracture zones acquires a ??87Sr between +9.5 and +10.0??? and maintains this value downward while Sr concentrations increase by two orders of magnitude. Ground-water samples from both boreholes and from in the HRL show the effects of mixing with saline waters containing as much as 59 mg/L Sr and ??87Sr values as large as +13.92%, Baltic Sea water is a potential component of the groundwater system with ??87Sr values only slightly larger than modern marine values (+0.3???) but with much lower concentrations (1.5 mg/L) than ocean water (8 mg/L). However, because of large Sr concentration differences between the saline groundwater (59 mg/L) and Baltic Sea water (1.5 rag/L), ??87Sr values are not particularly sensitive indicators of sea-water intrusion even though their ??87Sr values differ substantially.

Applied Geochemistry↗

Palynological record from the North Atlantic region at 3 Ma: Vegetational distribution during a period of global warmth

Pollen assemblages from five mid-Pliocene, deep-marine and shallow-marine sites in the North Atlantic Ocean region were analyzed quantitatively to estimate vegetational composition and terrestrial paleoclimates during a time interval centered at about 3 Ma. Three subarctic sites (58–67°N latitude) from the Norwegian Sea, northern Iceland, and the Labrador Sea yielded pollen assemblages characteristic of mixed conifer-hardwood vegetation; these assemblages have no close modern analogs, but the most similar modern vegetation is that of the Tsuga (hemlock)-northern hardwood forests of Newfoundland and Nova Scotia (45–50°N). The presence of such vegetation at these sites indicates mid-Pliocene January temperatures from 4 to 10°C warmer than today and a northward shift of the deciduous forest zone into areas presently occupied by boreal forests. Pollen assemblages from the mid-latitude (36°N) Yorktown Formation site in southeastern Virginia, USA represent Quercus-Carya-Pinus (oak-hickory-pine) forests, similar to those presently occupying much of the Atlantic coastal plain of the United States. Modern analogs for this site are located off the coasts of North Carolina and South Carolina, indicating mid-Pliocene January temperatures 3–5°C warmer than today. In southwestern Florida (27°N), pollen assemblages from the mid-Pliocene Pincrest Beds are representative of pine-dominated communities, similar to Pinus palustris/P. ellittii forests (longleaf/slash pine) growing in Florida today. Close modern analogs for the Pinecrest Beds are located at numerous sites around the Florida peninsula, indicating mid-Pliocene temperatures about the same as today for this region. These sites show a gradient from much higher than present temperatures at high latitudes to little change from present temperatures at low latitudes and low elevations; a similar pattern is shown by mid-Pliocene sea-surface and isotopic data. Such a gradient also is consistent with the northward migration of the boreal forest zone, covering sites as far north as Meighen and Banks Islands, a northward shift of the deciduous-boreal forest boundary in both North America and Europe, and little change in vegetational distribution in low elevation sites in subtropical latitudes during the mid-Pliocene warm interval. Atmospheric temperaturs estimated from vegetational distributions indicate a Pliocene to modern temperature anomaly of a similar pattern and magnitude to that indicated by sea-surface temperatures. These data are most consistent with current general circulation model simulations of climate changes in response to increased meridional heat transport.

Florida, Newfoundland and Labrador, Virginia↗

California State Waters Map Series — Offshore of Salt Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Salt Point map area is located in northern California, about 110 km north of San Francisco and 50 km south of Point Arena. The map area includes three California Marine Protected Areas: the southern portion of the Stewarts Point State Marine Reserve, the Salt Point State Marine Conservation Area, and the Gerstle Cove State Marine Reserve. The coast and shoreline are rugged and scenic, characterized by rocky promontories, steep bluffs capped by bare to forested marine terraces, kelp-rich coves, and nearshore rocks and pinnacles. The largely undeveloped onshore part of the map area is used primarily for grazing and recreation. U.S. Highway 1 extends along the coast through the map area, passing through Salt Point State Park, Kruse Rhododendron State Natural Reserve, and Stillwater Cove Regional Park. Sandy beaches are uncommon, present only in relatively protected coves. The seafloor in the map area extends from the shoreline to water depths of about 90 to 100 m. The nearshore to inner shelf area (to water depths of about 50 to 60 m) typically dips seaward about 1.0° to 1.5° and is underlain by bedrock and sand-sized to coarser grained sediment. The midshelf, underlain predominantly by muddy sediments, slopes more gently (less than 0.5°). Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Offshore of Salt Point map area was emergent and the shoreline was about 20 km west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. The onshore part of the map area is cut by the northwest-striking San Andreas Fault—the right-lateral transform boundary between the North American and Pacific tectonic plates with an estimated slip rate of about 17 to 25 mm/yr in this area. The region between Fort Ross and Point Arena, west of the San Andreas Fault, is the known as the “Gualala Block” on the basis of its distinctive geology. The Gualala Block consists of a thick, discontinuous Upper Cretaceous to Miocene stratigraphic section, however, only the submarine fan deposits of the Paleocene and Eocene German Rancho Formation are exposed along the coast in the Offshore of Salt Point map area. The German Rancho Formation also forms all of the rugged seafloor bedrock outcrops in the map area. The western boundary of the Gualala Block lies 3 to 5 km offshore, perhaps at the shore-parallel Gualala Fault. High-resolution seismic-reflection data reveal shallow folding and faulting in inferred upper Pleistocene strata along the Gualala Fault trend, suggesting this structure is now or has been recently active. The last ground rupture in the map area occurred during the devastating great 1906 California earthquake (M7.8, 4/18/1906), thought to have nucleated on the San Andreas Fault about 100 kilometers to the south offshore of San Francisco. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Throughout the year, this part of the central California coast is exposed to four wave climate regimes: the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, with wave heights at offshore buoys ranging from 2 to 10 m and wave periods ranging from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore Central America. Characteristically, these swells have smaller wave heights (0.3 to 3 m) and similarly long periods (range 10 to 25 s). Northwest wind waves affect the coast throughout the year, while local wind waves are most common from October to April. These two wind-wave regimes typically have wave heights of 1 to 4 m and short periods (3 to 10 s). Potential marine benthic habitats in the Offshore of Salt Point map area include unconsolidated continental shelf sediments, mixed continental shelf substrate, and hard continental shelf substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species.

California↗

Concordant paleolatitudes from ophiolite sequences in the northern California Coast Ranges, U.S.A.

Paleomagnetic data have been obtained from two ophiolite sequences in the northern California Coast Ranges: from Mount Diablo in the San Francisco Bay area and from Potter Valley, north of Clear Lake. The ophiolite exposed at Mount Diablo is part of the late Middle to Late Jurassic Coast Range ophiolite, and that exposed near Potter Valley is Late Jurassic to perhaps Early Cretaceous in age and occurs within the Franciscan assemblage. Data from the sheeted-dike complex at Mount Diablo show these rocks to be strongly overprinted, probably following uplift and erosion of the ophiolite. Samples whose primary remanent magnetization seems to be recovered yield a mean paleomagnetic pole at 30.7°N, 159.5°E with α 95 = 5.6°. A comparison of this pole with the Jurassic apparent polar wander path for North America indicates that the ophiolite has rotated 45° ± 7° counterclockwise relative to the craton and has not been latitudinally displaced. The diabase and pillow basalt in Potter Valley have not been strongly overprinted and data from those rocks yield a paleomagnetic pole at 79.0°N, 61.5°E with α 95 = 6.4°. This result indicates that the ophiolite at Potter Valley has rotated approximately 29° ± 8° clockwise, and has undergone little or no latitudinal displacement. Because of the predominantly northeastward transport of oceanic plates converging with the western margin of North America since middle Mesozoic time, the absence of appreciable northward displacement of either ophiolite fragment indicates that both formed close to the continental margin.

California↗

Driving mechanisms for >40 km of exhumation during contraction and extension in a continental arc, Cascades core, Washington

In the NW North American Cordillera, the Cascades core region of the Coast Plutonic Complex underwent Late Cretaceous (>96 Ma to locally 73 Ma) SW-NE contraction and crustal thickening followed by dextral transpression (???73 to 55 Ma), then transtension (<55 Ma). Exhumation occurred during all three phases. During contraction, slow exhumation (???0.6 mm/yr) occurred along the margins of the core, driven by isostatic rebound and erosion, and faster exhumation (>3 mm /yr) by local thrusting in regions undergoing crustal thickening. In the central part of the core (Chelan block), >40 km of exhumation occurred between 91 and 45 Ma, about half of which occurred during early contraction (driven by thrusting) and half during top-to-north, arc-oblique shear during reactivation of a midcrustal Cretaceous thrust, the Dinkelman decollement. The footwall of this thrust consists of the Swakane Biotite Gneiss, a Cretaceous, metaclastic assemblage with recorded pressures of 10-12 kbar, no arc-related magmatism, and structures dominated by pervasive top-to-north shearing. The hanging wall consists of the Napeequa Complex, an oceanic assemblage with recorded pressures of 6-12 kbar, voluminous arc-related magmatism, and complex structures indicating early top-to-WSW shearing, younger top-to-north shearing, and widespread folding. In the Napeequa, top-to-north shearing started by 73 Ma during melt-present conditions at pressures ???6 kbar. Top-to-north shearing in both hanging wall and footwall continued during exhumation (???1.6 mm/yr) and cooling to greenschist facies conditions during which slip became increasingly localized, eventually resulting in formation of pseudotachylite on discrete slip surfaces. We suggest that arc-oblique extension was driven by along-arc heterogeneity in displacements/ erosion, initially during transpression and underplating of continental sediments, and later during transtension. Copyright 2004 by the American Geophysical Union.

Tectonics↗

Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than adequate for the majority of sedimentological applications, especially considering that the autocorrelation technique is estimated to be at least 100 times faster than traditional methods.

Sedimentary Geology↗

In situ time-series measurements of subseafloor sediment properties

The capabilities and diversity of subsurface sediment sensors lags significantly from what is available for the water column, thereby limiting progress in understanding time-dependent seabed exchange and high-frequency acoustics. To help redress this imbalance, a new instrument, the autonomous sediment profiler (ASP), is described herein. ASP consists of a four-electrode, Wenner-type resistivity probe and a thermistor that log data at 0.1-cm vertical intervals over a 58-cm vertical profile. To avoid resampling the same spot on the seafloor, the probes are moved horizontally within a 20 times 100-cm -2 area in one of three preselected patterns. Memory and power capacities permit sampling at hourly intervals for up to 3-mo duration. The system was tested in a laboratory tank and shown to be able to resolve high-frequency sediment consolidation, as well as changes in sediment roughness. In a field test off the southern coast of France, the system collected resistivity and temperature data at hourly intervals for 16 d. Coupled with environmental data collected on waves, currents, and suspended sediment, the ASP is shown to be useful for understanding temporal evolution of subsurface sediment porosity, although no large depositional or erosional events occurred during the deployment. Following a rapid decrease in bottom-water temperature, the evolution of the subsurface temperature field was consistent with the 1-D thermal diffusion equation coupled with advection in the upper 3-4 cm. Collectively, the laboratory and field tests yielded promising results on time-dependent seabed change.

IEEE Journal of Oceanic Engineering↗

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York↗

Cross-shelf transport into nearshore waters due to shoaling internal tides in San Pedro Bay, CA

In the summer of 2001, a coastal ocean measurement program in the southeastern portion of San Pedro Bay, CA, was designed and carried out. One aim of the program was to determine the strength and effectiveness of local cross-shelf transport processes. A particular objective was to assess the ability of semidiurnal internal tidal currents to move suspended material a net distance across the shelf. Hence, a dense array of moorings was deployed across the shelf to monitor the transport patterns associated with fluctuations in currents, temperature and salinity. An associated hydrographic program periodically monitored synoptic changes in the spatial patterns of temperature, salinity, nutrients and bacteria. This set of measurements show that a series of energetic internal tides can, but do not always, transport subthermocline water, dissolved and suspended material from the middle of the shelf into the surfzone. Effective cross-shelf transport occurs only when (1) internal tides at the shelf break are strong and (2) subtidal currents flow strongly downcoast. The subtidal downcoast flow causes isotherms to tilt upward toward the coast, which allows energetic, nonlinear internal tidal currents to carry subthermocline waters into the surfzone. During these events, which may last for several days, the transported water remains in the surfzone until the internal tidal current pulses and/or the downcoast subtidal currents disappear. This nonlinear internal tide cross-shelf transport process was capable of carrying water and the associated suspended or dissolved material from the mid-shelf into the surfzone, but there were no observation of transport from the shelf break into the surfzone. Dissolved nutrients and suspended particulates (such as phytoplankton) transported from the mid-shelf into the nearshore region by nonlinear internal tides may contribute to nearshore algal blooms, including harmful algal blooms that occur off local beaches.

California↗

Effects of the earthquake of March 27, 1964, on various communities

The 1964 earthquake caused wide-spread damage to inhabited places throughout more than 60,000 square miles of south-central Alaska. This report describes damage to all communities in the area except Anchorage, Whittier, Homer, Valdez, Seward, the communities of the Kodiak group of islands, and communities in the Copper River Basin; these were discussed in previous chapters of the Geological Survey's series of reports on the earthquake. At the communities discussed herein, damage resulted primarily from sea waves of diverse origins, displacements of the land relative to sea level, and seismic shaking. Waves took all of the 31 lives lost at those communities; physical damage was primarily from the waves and vertical displacements of the land relative to sea level. Destructive waves of local origin struck during or immediately after the earthquake throughout much of Prince William Sound, the southern Kenai Peninsula, and the shores of Kenai Lake. In Prince William Sound, waves demolished all but one home at the native village of Chenega, destroyed homesites at Point Nowell and Anderson Bay, and caused varying amounts of damage to waterfront facilities at Sawmill Bay, Latouche, Port Oceanic, Port Nellie Juan, Perry Island, and western Port Valdez. The local waves, which ran up as high as 70 feet above tide level at Chenega and more than 170 feet in several uninhabited parts of the Sound, took nearly all of the lives lost by drowning at these communities. Destructive local waves that devastated shores of Anderson Bay and adjacent parts of western Port Valdez probably were generated primarily by massive submarine slides of glacial and fluvioglacial deposits ; the origin of the waves that caused damage at most of the other communities and at extensive uninhabited segments of shoreline is not known. At these places the most probable generative mechanisms are: unidentified submarine slides of unconsolidated deposits, and (or) the horizontal tectonic displacements, of 20 to more than 60 feet, that occurred in the Prince William Sound region during the earthquake. A train of long-period seismic sea waves that began about 20 minutes after the start of the earthquake inundated shores along the Gulf of Alaska coast to a maximum height of 35 feet above tide level. At the communities described, they virtually destroyed two logging camps at Whidbey Bay and Puget Bay on the south coast of the Kenai Peninsula, caused moderate damage to boat harbors and docks at Seldovia and Cordova, floated away some beach cabins in the Cordova area, and drowned two people, one at Point Whitshed near Cordora and one at the Cape Saint Elias Light Station. The seismic sea waves were generated by regional tectonic uplift of the sea floor on the Continental Shelf. Vertical tectonic displacements of the land relative to sea level that accompanied the earthquake affected virtually all the coastal communities. Tectonic subsidence of 5 to 6 feet, augmented locally by surficial subsidence of unconsolidated deposits required either the relocation or raising of structures at Portage, Girdwood, and Hope on Turnagain Arm. Shoreline submergence resulting from about 3½ feet of tectonic subsidence at Seldovia necessitated raising all waterfront facilities and the airstrip above the level of high tides. On the other hand, tectonic uplift of the land in the Prince Williams Sound region required deepening of the small-boat harbors at Cordora and Tatitlek, dredging of the waterways in the Cordova area, and lengthening of some docks or piers at Cordova, the Cape Hinchinbrook Light Station, and in Sawmill Bay. Significant structural damage from direct seismic shaking was largely confined to fluid containers and a pier facility near Kenai. Indirect damage from fissuring and differential settling of foundation mterials in the vicinity of the Cordova airfield mused damage to a building, underground utilities, an airfield fill, and the highway. Minor amounts of direct and indirect damage from seismic vibrations were sustained by most of the communities situated on unconsolidated deposits as far east as Yakutat, north to Fairbanks, and west to King Salmon. Except for a few cracked or toppled chimney, all the damage from shaking was confined to areas of thick, unconsolidated deposits. Foundation damage was almost entirely restricted to water-saturated unconsolidated deposits which, when liquefied by seismic shaking, could spread laterally toward free faces and (or) settle differentially through compaction.

Alaska↗

Occurrence and genetic typing of infectious hematopoietic necrosis virus in Kamchatka, Russia

Infectious hematopoietic necrosis virus (IHNV) is a well known rhabdoviral pathogen of salmonid fish in North America that has become established in Asia and Europe. On the Pacific coast of Russia, IHNV was first detected in hatchery sockeye from the Kamchatka Peninsula in 2001. Results of virological examinations of over 10 000 wild and cultured salmonid fish from Kamchatka during 1996 to 2005 revealed IHNV in several sockeye salmon Oncorhynchus nerka populations. The virus was isolated from spawning adults and from juveniles undergoing epidemics in both hatchery and wild sockeye populations from the Bolshaya watershed. No virus was detected in 2 other water-sheds, or in species other than sockeye salmon. Genetic typing of 8 virus isolates by seguence analysis of partial glycoprotein and nucleocapsid genes revealed that they were genetically homogeneous and fell within the U genogroup of IHNV. In phylogenetic analyses, the Russian IHNV sequences were indistinguishable from the sequences of North American U genogroup isolates that occur throughout Alaska, British Columbia, Washington, and Oregon. The high similarity, and in some cases identity, between Russian and North American IHNV isolates suggests virus transmission or exposure to a common viral reservoir in the North Pacific Ocean. Inter-Research 2007.

Kamchatka↗

Northern Monterey Bay upwelling shadow front: Observations of a coastally and surface-trapped buoyant plume

During the upwelling season in central California, northwesterly winds along the coast produce a strong upwelling jet that originates at Point A??o Nuevo and flows southward across the mouth of Monterey Bay. A convergent front with a mean temperature change of 3.77 ?? 0.29??C develops between the warm interior waters and the cold offshore upwelling jet. To examine the forcing mechanisms driving the location and movement of the upwelling shadow front and its effects on biological communities in northern Monterey Bay, oceanographic conditions were monitored using cross-shelf mooring arrays, drifters, and hydrographic surveys along a 20 km stretch of coast extending northwestward from Santa Cruz, California, during the upwelling season of 2007 (May-September). The alongshore location of the upwelling shadow front at the northern edge of the bay was driven by: regional wind forcing, through an alongshore pressure gradient; buoyancy forces due to the temperature change across the front; and local wind forcing (the diurnal sea breeze). The upwelling shadow front behaved as a surface-trapped buoyant current, which is superimposed on a poleward barotropic current, moving up and down the coast up to several kilometers each day. We surmise that the front is advected poleward by a preexisting northward barotropic current of 0.10 m s -1 that arises due to an alongshore pressure gradient caused by focused upwelling at Point A??o Nuevo. The frontal circulation (onshore surface currents) breaks the typical two-dimensional wind-driven, cross-shelf circulation (offshore surface currents) and introduces another way for water, and the material it contains (e.g., pollutants, larvae), to go across the shelf toward shore.Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research C: Oceans↗

Prologue

The Southern California Continental Borderland and the associated Western Transverse Ranges constitute one of the most distinctive environments on the west coast of North America. Current thinking indicates that the physiography of the region resulted from change in plate motion during the Miocene when a remnant of the Farallon Plate was captured by the Pacific Plate off Southern California. This capture led to extensional deformation of the major upper plates within the subduction zone, rotation and translation of large crustal blocks in the region, and widespread volcanism (e.g., Nicholson et al., 1994 ). The continental microplate that encompasses the Western Transverse Ranges province eventually rotated at least 90° clockwise, and intense crustal extension affected parts of the region that became the Borderland. Subsequent deformation, including the development of the San Andreas Fault system, led to north-south compression in parts of the region and possible westward escape of crustal blocks. The resulting complex configuration of basins and ranges continues to be seismically active and contains small-scale examples of such physiographic features as canyons, fans, and continental slopes that bear strong similarity to much larger features found in the major oceanic basins.

GSA Special Papers↗