Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2001

Geologic map of the Riverside East 7.5' quadrangle, Riverside County, California

Open-File Report 01-452 contains a digital geologic map database of the Riverside East 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO Environmental Systems Research Institute (http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in rse_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2001

Geologic map of the Lake Mathews 7.5' quadrangle, Riverside County, California

Open-File Report 01-479 contains a digital geologic map database of the Lake Mathews 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A PostScript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in lkm_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Miscellaneous Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous.Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand.In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS1982

Drainage divides, Massachusetts; Blackstone and Thames River basins

Drainage boundaries for selected subbasins of the Blackstone and Thames River basins in eastern Hampden, eastern Hampshire, western Norfolk, southern Middlesex, and southern Worcester Counties, Massachusetts, are delineated on 12 topographic quadrangle maps at a scale of 1:24,000. Drainage basins are shown for all U.S. Geological Survey data-collection sites and for mouths of major rivers. Drainage basins are shown for the outlets of lakes or ponds and for streams where the drainage area is greater than 3 square miles. Successive sites along watercourses are indicated where the intervening area is at least 6 miles on tributary streams or 15 square miles along the Blackstone River, French River, or Quinebaug River. (USGS)

Open-File Report↗
USGS1982

Drainage divides, Massachusetts; Deerfield and Millers River basins

Drainage boundaries for selected subbasins in Franklin and northwestern Worcester Counties, Massachusetts, are delineated on 16 topographic quadrangle maps at a scale of 1:24,000. Drainage basins are shown for all U.S. Geological Survey data-collection sites and for mouths of major rivers. Drainage basins are shown for the outlets of lakes or ponds and for streams where the drainage area is greater than 3 square miles. Successive sites along watercourses are indicated where the intervening area is at least 6 square miles on tributary streams or 10 square miles along the Millers and Deerfield Rivers, or 20 square miles along the Connecticut River. (USGS)

Open-File Report↗
USGS1982

Drainage divides, Massachusetts; Connecticut River lowlands and Chicopee River basin

Drainage boundaries for selected subbasins of the Connecticut River lowlands and Chicopee River basin in southern Franklin, eastern Hampshire, and western Worcester Counties, Massachusetts , are delineated on 18 topographic quadrangle maps at a scale of 1:24,000. Drainage basins are shown for all U.S. Geological Survey data-collection sites and for mouths of major rivers. Drainage basins are shown for the outlets of lakes or ponds and for streams where the drainage area is greater than 3 square miles. Successive sites along watercourses are indicated where the intervening area is at least 6 square miles on tributary streams or 10 square miles along the Chicopee River, or 20 square miles along the Connecticut River. (USGS)

Open-File Report↗
USGS1986

Predictive spatial modeling of narcotic crop growth patterns

Spatial models for predicting the geographic distribution of marijuana crops have been developed and are being evaluated for use in law enforcement programs. The models are based on growing condition preferences and on psychological inferences regarding grower behavior. Experiences of local law officials were used to derive the initial model, which was updated and improved as data from crop finds were archived and statistically analyzed. The predictive models are changed as crop locations are moved in response to the pressures of law enforcement. The models use spatial data in a raster geographic information system. The spatial data are derived from the U.S. Geological Survey's US GeoData, standard 7.5-minute topographic quadrangle maps, interpretations of aerial photographs, and thematic maps. Updating of cultural patterns, canopy closure, and other dynamic features is conducted through interpretation of aerial photographs registered to the 7.5-minute quadrangle base. The model is used to numerically weight various data layers that have been processed using spread functions, edge definition, and categorization. The building of the spatial data base, model development, model application, product generation, and use are collectively referred to as the Area Reduction Program (ARP). The goal of ARP is to provide law enforcement officials with tactical maps that show the most likely locations for narcotic crops.

Open-File Report↗
USGS1994

Storm-tide elevations produced by Hurricane Andrew along the southern Florida coasts, August 24, 1992

On August 24, 1992, Hurricane Andrew crossed southern peninsular Florida. The combined effects of storm surge from the hurricane and astronomical tide, referred to as storm tide, caused flooding over a large part of southern Florida. Subsequent to the flooding, many high-water marks were identified, described, and surveyed along the south- eastern coast of Florida (Miami to Key Largo) and at selected areas along the southwestern coast of Florida (Flamingo to Goodland). Descriptions of these 336 high-water makrs are presented in tabular form in this report and their locations are plotted on nineteen 7.5-minute topographic quadrangle maps. For the southeastern coast, north-south profiles of the high-water makrs along the outher and inner barrier islands and the western shoreline of Biscayne Bay are presented. Average storm-tide elevations (relative to sea level) ranged from 4 to 6 feet in northern Biscayne Bay, were as much as 17 feet on the western shoreline near the center of the bay and ranged from 3 to 6 feet in southern Biscayne Bay and Barnes Sound. Storm-tide elevations along the southwestern coast ranged from 4 to 5 feet at Flamingo and 5 to 7 feet at Goodland in the Ten Thousand Islands area.

Florida↗
USGS1975

Drainage areas for Illinois streams

Drainage areas were tabulated for all streams in Illinois which drain over 100 square miles. at sites where streamflow data have been collected, and at other selected locations. Areas were planimetered on U.S. Geological Survey topographic quadrangle maps and balanced to known areas taken from Smithsonian Geographical Tables of areas of quadrilaterals of the earth's surface (procedures and standards recommended by Subcommittee on Hydrology, Federal Inter-Agency River Basin Committee). Streams are tabulated in sequence; first, the Ohio River basin, followed by the St. Lawrence River basin, and finally, the Mississippi River basin. Streams are listed in downstream order, starting at the headwaters; the rank of the stream system within each basin is indicated by indention. At sites where streamflow data had been collected, previously assigned U.S. Geological Survey eight-digit numbers are used. These numbers, which describe unique sites, increase in downstream order. All locations are identified by reference to a town, land-line location, topo­graphic quadrangle, and county at the point where the drainage area was determined. An alphabetical index is provided.

Illinois↗
USGS1979

Selected water resources data, Clarion River and Redbank Creek basins, northwestern Pennsylvania: Part 2

This report presents selected basic data collected during a study of the water resources of the Clarion River and Redbank Creek basins in northwestern Pennsylvania. Hydrologic information including data on aquifers, water levels, and yields is presented for 1,304 wells. Records for 51 springs are also given. The report contains 83 chemical analyses of water samples collected from 30 stream sites and 300 analyses of water from 196 wells and 43 springs. Also included are 103 trace-element analyses. Monthly and annual means of ground-water levels for six observation wells are tabulated. Benthic invertebrate data from 136 stream sites are listed. Locations of data-collection sites are shown on 50 page-size reductions of 7.5-minute topographic quadrangle maps. (Kosco-USGS)

Pennsylvania↗
USGS2003

Predictive modeling of forest cover type and tree canopy height in the central Rocky Mountains of Utah

Maps of forest cover type and canopy height are needed for LANDFIRE, a multi-scale fire risk assessment project designed to generate intermediate-resolution data of vegetation and fire fuel characteristics for the U.S. Here we describe an evaluation study in the central Rockies of Utah, comparing tree-based methods, multivariate adaptive regression splines (MARS), and a hybrid method for mapping forest cover and canopy height on the basis of more than 2,000 forest inventory ground plots in the seven million ha mapping zone. The two forest attributes were modeled as functions of a variety of predictor variables, including: Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images acquired at three different seasons; Tasseled-cap brightness, greenness, and wetness; a forest type group map; and topographic variables derived from Digital Elevation Models (DEMs); and other ancillary variables. The hybrid modeling approach showed a marked increase in overall and within forest cover type accuracies, outperforming the tree-based and MARS approaches. Little difference was seen in global performance measures of forest canopy height models, but patterns in residual plots resulting from different modeling approaches raise questions about utility of height predictions in different applications.

Idaho, Utah, Wyoming↗
USGS2021

Hydrographic and benthic mapping—St. Croix National Scenic Riverway—Osceola landing

High-resolution topographic and bathymetric mapping can assist in the analysis of river habitat. The National Park Service has been planning to relocate a boat ramp along the St. Croix River in Minnesota, across the river from the town of Osceola, Wisconsin, to improve visitor safety, improve operations for commercial use, enhance the overall visitor experience, and eliminate deferred maintenance at the landing. This landing grants access to the St. Croix River, which is a part of the National Park Service St. Croix National Scenic Riverway. Hydrographic and topographic surveys were needed to determine where the new location should be. The objective for these surveys was to provide baseline information in order to assess the direct effects of the landing relocation on physical habitat in areas adjacent to Osceola, Wisconsin. The study area for these surveys was about 18.5 hectares and located directly off the existing landing. Although the existing boat launch is referred to as the Osceola landing, it is located on the Minnesota side of the river and is the busiest National Park Service landing on the St. Croix River (National Park Service St. Croix National Scenic Riverway, 2020). This report documents methods and results of aquatic benthic mapping in a small area of the St. Croix River. The hydroacoustic and topographic surveys were collected from October 16–17, 2019. The hydrographic surveys consisted of multibeam and sidescan sound navigation and ranging (sonars). The topographic shoreline survey consisted of light detection and ranging (lidar) captured by boat adjacent to riverbanks. Additionally, an acoustic Doppler current profiler was used to measure flow velocities. The water level was higher than normal, and therefore had faster flow during the hydroacoustic surveys. Multibeam, lidar, and sidescan surveys occurred the first day, and the velocity mapping and ground truthing was conducted the second day. Multibeam and lidar provided derivative datasets that included bathymetry and a topobathy with a spatial resolution of 1 foot. From these data, additional data could be measured including slope and terrain ruggedness. Sidescan (acoustic reflectance measures) provided imagery that was used to help with interpretation of the river bottom. Outcomes from these combined datasets were substrate and bedform maps. Much of the area was covered in sand ripples or small dunes. A small area running adjacent to the deeper valley or cut down the river consisted of harder substrates, such as cobble and gravel. Large woody debris piles were found throughout the study area. Multiple stationary moving-bed tests were completed, and no corrections were recommended for the conditions occurring during survey. Mussel presence was noted in some of the underwater videos. The physical parameters of depth, flow, bedforms, and substrate derived from the datasets provided baseline measures for a benthic habitat map. Further analysis of benthic habitat might be possible with additional biological and chemical data.

Wisconsin↗
USGS2001

Geologic map of the Steele Peak 7.5' quadrangle, Riverside County, California

Open-File Report 01-449 contains a digital geologic map database of the Steele Peak 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in stp_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2002

Geologic map of the Corona South 7.5' quadrangle, Riverside and Orange counties, California

Open-File Report 01-021 contains a digital geologic map database of the Corona South 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. A Readme file; includes in Appendix I, data contained in crs_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2002

Geologic map of the Corona North 7.5' quadrangle, Riverside and San Bernardino Counties, California

Open-File Report 02-22 contains a digital geologic map database of the Corona North 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in crn_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000- scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2003

Preliminary geologic map of the Perris 7.5' quadrangle, Riverside County, California

Open-File Report 03-270 contains a digital geologic map database of the Perris 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. A Readme file b. The same graphic as described in 2 above. Test plots have not produced precise 1:24,000- scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formationname, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc.

California↗
USGS2003

Preliminary geologic map of the Elsinore 7.5' quadrangle, Riverside County, California

Open-File Report 03-281 contains a digital geologic map database of the Elsinore 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in els_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗
USGS2012

Developing Vs30 site-condition maps by combining observations with geologic and topographic constraints

Despite obvious limitations as a proxy for site amplification, the use of time-averaged shear-wave velocity over the top 30 m (V S30 ) remains widely practiced, most notably through its use as an explanatory variable in ground motion prediction equations (and thus hazard maps and ShakeMaps, among other applications). As such, we are developing an improved strategy for producing V S30 maps given the common observational constraints. Using the abundant V S30 measurements in Taiwan, we compare alternative mapping methods that combine topographic slope, surface geology, and spatial correlation structure. The different V S30 mapping algorithms are distinguished by the way that slope and geology are combined to define a spatial model of V S30 . We consider the globally applicable slope-only model as a baseline to which we compare two methods of combining both slope and geology. For both hybrid approaches, we model spatial correlation structure of the residuals using the kriging-with-a-trend technique, which brings the map into closer agreement with the observations. Cross validation indicates that we can reduce the uncertainty of the V S30 map by up to 16% relative to the slope-only approach.

Conference Paper↗
USGS2012

Photogrammetric portrayal of Mars topography

Special photogrammetric techniques have been developed to portray Mars topography, using Mariner and Viking imaging and nonimaging topographic information and earth-based radar data. Topography is represented by the compilation of maps at three scales: global, intermediate, and very large scale. The global map is a synthesis of topographic information obtained from Mariner 9 and earth-based radar, compiled at a scale of 1:25,000,000 with a contour interval of 1 km; it gives a broad quantitative view of the planet. At intermediate scales, Viking Orbiter photographs of various resolutions are used to compile detailed contour maps of a broad spectrum of prominent geologic features; a contour interval as small as 20 m has been obtained from very high resolution orbital photography. Imagery from the Viking lander facsimile cameras permits construction of detailed, very large scale (1:10) topographic maps of the terrain surrounding the two landers; these maps have a contour interval of 1 cm. This paper presents several new detailed topographic maps of Mars.

Journal of Geophysical Research Solid Earth↗