Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2012

Television observations from Surveyor 3

A total of 6315 pictures were taken by the television camera on Surveyor 3 after the lunar landing. These pictures have provided much new information about the location of the landing site on the moon, the detailed topographic and geologic characteristics of the lunar surface, and the appearance of the earth as seen from the moon, both during eclipse of the sun and during partial direct illumination by the sun. Surveyor 3 landed in a subdued crater slightly more than 200 meters in diameter, which has a low rounded rim and is about 15 meters deep. The spacecraft is situated on the east wall of the crater, about half way between the center of the crater and the rim crest. The spacecraft is inclined 14.7° ± 1.0° toward the west. The selenographic coordinates of the landing site are 2.94°S latitude, 23.34°W longitude, relative to selenodetic control adopted by the Aeronautical Chart and Information Center. Small morphologic elements of the landing site include small craters, linear ridges and troughs, and fragmental debris. The craters and fragmental debris resemble those observed at the Surveyor 1 landing site, both in distribution of shape and in distribution of size. Most of the craters in Surveyor 1 and 3 pictures are inferred to be of impact origin. Their size-frequency distribution corresponds to the distribution that would be produced by repetitive bombardment by meteoroids, a bombardment sufficiently prolonged that the crater population has reached a steady state or has come to equilibrium. Some of the craters observed at the Surveyor 3 landing site are inferred to be of secondary impact origin, and some probably have been formed either by subsidence or by drainage of fragmental debris into cracks or fissures in the subsurface. Fragmental debris at the landing site is inferred to have been derived primarily by the same process of repetitive bombardment that produced the majority of craters. The inferred volumetric size-frequency distribution of fragments, derived from the observed size distribution of fragments on the surface, is similar to the distribution that would be produced by repetitive bombardment of coherent rocks by meteoroids with a mass-frequency distribution like that found from observed meteors and recovered meteorites on earth. Two prominent strewn fields of blocky debris were observed around two craters, 13 and 15 meters across, at the Surveyor 3 site. The 13-meter crater has a sharp raised rim, and the 15-meter crater has a more subdued rounded rim. The blocks associated with the subdued crater have twice as high a mean roundness as the blocks associated with the raised-rim crater, and they are much more deeply buried. The size-frequency distribution function for the fragments in each of the strewn fields of blocks resembles the size-frequency distribution for fragments ejected by impacts in strong rock, such as Meteor Crater, Arizona. Most of the fragments at the surface of the Surveyor 3 landing site are evidently part of a layer of fragmental material of low cohesion that is at least 1 meter thick along the upper parts of the wall of the crater in which Surveyor 3 landed and may be much thicker near the center of the crater. The evidence from the Surveyor 3 pictures suggests that this layer of debris, or regolith, is subject to downslope creep or mass movement. Creep is probably caused by seismic shaking, due mainly to near and far impact events and perhaps due partly to internal lunar seismicity. Disturbances of the lunar surface produced by Surveyor 3, like those produced by Surveyor 1, exposed material at depths of a few centimeters or less that was darker than the material at the surface. The albedo of the fine-grained fragmental debris is probably 20 to 30% lower at depths of only a fraction of a millimeter than it is at the optically observed surface. All coarse fragments protruding above the general level of the surface have a higher albedo than the fine-grained matrix of the surface. These general photometric relationships can be explained if it is assumed that the surfaces of the particles in the shallow lunar subsurface tend to become coated with a dark substance; the term proposed for this hypothetical substance is ‘lunar varnish’ On the protruding surface of blocks and coarse fragments the lunar varnish is scrubbed off by the processes that cause rounding. The exposed surfaces of fine particles on the lunar surface are similarly affected, but, because they are mixed relatively rapidly with particles just beneath the surface, the process is incomplete and the fine-grained material exposed at the lunar surface, therefore, has a lower albedo than blocks and other large fragments. Coating of particles by lunar varnish evidently takes place just beneath the surface. The estimated normal luminance factor (normal albedo) of an undisturbed part of the lunar surface next to footpad 2 of the Surveyor 3 spacecraft is 8.5%. An area of the lunar surface disturbed by the surface sampler has an estimated normal luminance factor of 6.6%, and fine-grained material placed on footpad 2 by the surface sampler has an estimated normal luminance factor of 7.6%. The errors in all these estimates may be as high as 25% because of uncertainties of correction required for light scattered from the camera mirror. Preliminary search for color differences, by color reconstitution methods, revealed no determinable differences in color among various coarse blocks, the fine-grained matrix of the surface, or fine-grained material disturbed by the surface sampler. Surveyor 3 pictures of the eclipse of the sun by the earth revealed a bright region in the refraction halo surrounding the earth, which was correlated with the position of the sun, and a series of bright beads that occurred over regions of the earth largely clear of clouds. Clouds tend to occult the refracted rays of the sun, most of which pass through the lower part of the atmosphere at the limb; the beads occurred in the depressions in the optical silhouette of the earth. Preliminary reduction of the color of the refracted light showed that the brightest region, near the position of the sun, exhibited a correlated color temperature close to 4800°K. The color temperature tended to be lower for light that followed paths of greater atmospheric absorption. Preliminary analysis of Surveyor 3 pictures of the partly illuminated earth revealed colors similar to the colors recorded from orbit by the Mercury and Gemini astronauts.

Journal of Geophysical Research↗
USGS1955

Development of the hydrosphere and atmosphere, with special reference to probable composition of the early atmosphere

A satisfactory hypothesis of the development of the hydrosphere and atmosphere depends upon evidence from many sciences and the solution of many other fundamental problems of earth history. But because it is so closely related to many other problems, any progress toward unravelling the history of the hydrosphere and atmosphere limits the range of permissible speculation about such distantly related questions as the origin of the solar system, continents, mountains, and living organisms. Several hypotheses of the source of the earth’s air and waters are examined for their consistency with established principles and observed geologic evidence, and special attention is given to the probable composition of the early atmosphere. Hypotheses of the origin of the atmosphere and hydrosphere fall into two chief categories: (1) that all air and water of the earth are residual from a dense primitive atmosphere that once enveloped a molten globe; or (2) that they have accumulated at the earth’s surface by leakage from the interior. The quantities of water, carbon dioxide, organic carbon, nitrogen, sulfur, etc., that have been or are now part of the earth’s atmosphere and hydrosphere may be estimated within reasonable limits of uncertainty and these “excess” volatiles afford a basis for testing chemical consequences of the alternative hypotheses. Several writers have suggested that the primitive atmosphere may have been composed largely of CH 4 and NH 3 . However, the equilibrium constants for reactions of these and other gases, combined with the evidence of the “excess” volatiles, indicate that CO 2 and N 2 are much more likely. The stabilities of methane and ammonia depend upon the presence of free hydrogen; and the escape rate of hydrogen from the earth is such that methane probably could have persisted in significant amounts in the early atmosphere no more than 10 6 to 10 8 years. For all but a relatively brief period at the very beginning of earth history, the atmosphere probably contained CO 2 and N 2 rather than CH 4 and NH 3 . When the consequences of a dense atmosphere of CO 2 and N 2 (but with almost no free O 2 or H 2 ) are examined, it is found that several chemical effects (such as the quantity of rocks that would have to be weathered, of sodium dissolved in sea water, and of CaCO 3 deposited on the sea floor very early in early history) are not borne out by the observed geologic record. From this and other lines of evidence it seems extremely improbable that the present atmosphere and hydrosphere are residual from any such dense primitive atmosphere. Instead, it seems likely that the atmosphere and hydrosphere have accumulated gradually during geologic time by the escape of water vapor, CO 2 , CO, N 2 , and other volatiles from intrusive and extrusive rocks that have risen more or less continuously from the deep interior of the earth. The amount of free oxygen in the early atmosphere is a separate problem that cannot be solved until the evidence of the earliest rocks has been appraised more fully. Current hypotheses of the origin of life appear to require a reducing atmosphere, yet it seems likely that oxygen has been accumulating from the photodissociation of water vapor ever since the earth was formed. The oxidation of ferrous iron and sulfides in the earliest sediments may have kept the oxygen content very low, and life may have begun in local reducing environments.

GSA Special Papers↗
USGS2018

Temporal stress changes caused by earthquakes: A review

Earthquakes can change the stress field in the Earth’s lithosphere as they relieve and redistribute stress. Earthquake-induced stress changes have been observed as temporal rotations of the principal stress axes following major earthquakes in a variety of tectonic settings. The stress changes due to the 2011 Mw9.0 Tohoku-Oki, Japan, earthquake were particularly well documented. Earthquake stress rotations can inform our understanding of earthquake physics, most notably addressing the long-standing problem of whether the Earth’s crust at plate boundaries is “strong” or “weak.” Many of the observed stress rotations, including that due to the Tohoku-Oki earthquake, indicate near-complete stress drop in the mainshock. This implies low background differential stress, on the order of earthquake stress drop, supporting the weak crust model. Earthquake stress rotations can also be used to address other important geophysical questions, such as the level of crustal stress heterogeneity and the mechanisms of postseismic stress reloading. The quantitative interpretation of stress rotations is evolving from those based on simple analytical methods to those based on more sophisticated numerical modeling that can capture the spatial-temporal complexity of the earthquake stress changes.

Journal of Geophysical Research B: Solid Earth↗
USGS1980

Declination and inclination errors in experimentally deposited specularite-bearing sand

Naturally disaggregated specularite-bearing sandstone from the Triassic Moenkopi Formation, artificially deposited in controlled magnetic fields of ∼5 × 10 −2 mT, acquires a stable remanent magnetization that has systematic errors in inclination and declination. Inclinations about 12° shallower than the applied fields are produced by deposition on a horizontal surface in still water. Deposition from flowing water on a surface inclined 6–10° results in inclination errors of as much as 20°. Water flowing obliquely to the applied field results in declination errors of about 10°, with declinations systematically rotated toward the upstream direction of current flow. These experimental results indicate that specularite-bearing sediment responds to the earth's field in a manner similar to magnetite-bearing sediment, and support observational evidence for a primary magnetization of depositional origin in specularite in red beds of the Moenkopi Formation.

Earth and Planetary Science Letters↗
USGS2006

In Jules Verne's footsteps: Seismology in the source

When Professor Otto Lidenbrock led his little band to the center of the Earth in Jules Verne's 1864 classic novel, the intrepid adventurers needed little more than practical 19th century clothes to provide them with comfort and protection. How different the science of earthquakes would be if conditions in the Earth were really so friendly to the would-be observer. Even the operation of seismic sensors at the relatively modest depth of 2–3 km, roughly the depth of the shallowest crustal earthquakes, requires careful precautions against the effects of unstable materials, temperature, pressure, and water for successful long-term observations to be made. Indeed, the handful of successful deep borehole experiments that have been conducted to date have depended on simple sensors with limited bandwidth and dynamic range, and have yielded data that were not ideally suited to investigating the details of the earthquake source.

Eos Science News↗
USGS2002

Plumes, or plate tectonic processes?

Hotspots – large volcanic provinces – such as Iceland, Hawaii and Yellowstone, are almost universally assumed to come from plumes of hot mantle rising from deep within the Earth. At Iceland, perhaps the best-studied hotspot on Earth, this hypothesis is inconsistent with many first-order observations, such as the lack of high temperatures, a volcanic track or a seismic anomaly in the lower mantle. The great melt production there is explained better by enhanced fertility in the mantle where the mid-Atlantic spreading ridge crosses the Caledonian suture zone. The thick crust built by the excessive melt production encourages complex, unstable, leaky microplate tectonics, which provides positive feedback by enhancing volcanism further. Such a model explains Iceland as a natural consequence of relatively shallow processes related to plate tectonics, and accounts for all the first- and second-order geophysical, geological and geochemical observations at Iceland without special pleading or invoking coincidences.

Astronomy and Geophysics↗
USGS2012

Airborne LiDAR analysis and geochronology of faulted glacial moraines in the Tahoe-Sierra frontal fault zone reveal substantial seismic hazards in the Lake Tahoe region, California-Nevada USA

We integrated high-resolution bare-earth airborne light detection and ranging (LiDAR) imagery with field observations and modern geochronology to characterize the Tahoe-Sierra frontal fault zone, which forms the neotectonic boundary between the Sierra Nevada and the Basin and Range Province west of Lake Tahoe. The LiDAR imagery clearly delineates active normal faults that have displaced late Pleistocene glacial moraines and Holocene alluvium along 30 km of linear, right-stepping range front of the Tahoe-Sierra frontal fault zone. Herein, we illustrate and describe the tectonic geomorphology of faulted lateral moraines. We have developed new, three-dimensional modeling techniques that utilize the high-resolution LiDAR data to determine tectonic displacements of moraine crests and alluvium. The statistically robust displacement models combined with new ages of the displaced Tioga (20.8 ± 1.4 ka) and Tahoe (69.2 ± 4.8 ka; 73.2 ± 8.7 ka) moraines are used to estimate the minimum vertical separation rate at 17 sites along the Tahoe-Sierra frontal fault zone. Near the northern end of the study area, the minimum vertical separation rate is 1.5 ± 0.4 mm/yr, which represents a two- to threefold increase in estimates of seismic moment for the Lake Tahoe basin. From this study, we conclude that potential earthquake moment magnitudes (M w ) range from 6.3 ± 0.25 to 6.9 ± 0.25. A close spatial association of landslides and active faults suggests that landslides have been seismically triggered. Our study underscores that the Tahoe-Sierra frontal fault zone poses substantial seismic and landslide hazards.

California;Nevada↗
USGS2011

Time-domain electromagnetic soundings collected in Dawson County, Nebraska, 2007-09

Between April 2007 and November 2009, the U.S. Geological Survey, in cooperation with the Central Platte Natural Resources District, collected time-domain electro-magnetic (TDEM) soundings at 14 locations in Dawson County, Nebraska. The TDEM soundings provide information pertaining to the hydrogeology at each of 23 sites at the 14 locations; 30 TDEM surface geophysical soundings were collected at the 14 locations to develop smooth and layered-earth resistivity models of the subsurface at each site. The soundings yield estimates of subsurface electrical resistivity; variations in subsurface electrical resistivity can be correlated with hydrogeologic and stratigraphic units. Results from each sounding were used to calculate resistivity to depths of approximately 90-130 meters (depending on loop size) below the land surface. Geonics Protem 47 and 57 systems, as well as the Alpha Geoscience TerraTEM, were used to collect the TDEM soundings (voltage data from which resistivity is calculated). For each sounding, voltage data were averaged and evaluated statistically before inversion (inverse modeling). Inverse modeling is the process of creating an estimate of the true distribution of subsurface resistivity from the mea-sured apparent resistivity obtained from TDEM soundings. Smooth and layered-earth models were generated for each sounding. A smooth model is a vertical delineation of calculated apparent resistivity that represents a non-unique estimate of the true resistivity. Ridge regression (Interpex Limited, 1996) was used by the inversion software in a series of iterations to create a smooth model consisting of 24-30 layers for each sounding site. Layered-earth models were then generated based on results of smooth modeling. The layered-earth models are simplified (generally 1 to 6 layers) to represent geologic units with depth. Throughout the area, the layered-earth models range from 2 to 4 layers, depending on observed inflections in the raw data and smooth model inversions. The TDEM data collected were considered good results on the basis of root mean square errors calculated after inversion modeling, comparisons with borehole geophysical logging, and repeatability.

Nebraska↗
USGS1985

New horizons in remote sensing for forest and range resource management

Forest and range resource scientists were among the first to recognize the potential of aircraft and satellite remote sensing for management of timber, forage, water, and wildlife resource. Today, data from a variety of sensor systems are being put to practical use for inventorying, monitoring, and assessing forest and range resources. In the future, improved sensor systems providing new kinds of data will be available. Likewise, new types of data handling and processing systems can be anticipated. Among the new or anticipated aircraft and satellite systems and/or data are National High-Altitude Photograph II, U. S. Geological Survey-acquired Side-Looking Airborne Radar, the Landsat thematic mapper, the National Oceanic Resolution Radiometer, the French Systeme Probatoire d'Observation de la Terre (SPOT) satellite, the European Space Agency Earth Resources Satellite, the National Aeronautics and Space Administration Large Format Camera and Shuttle Imaging Radar (SIR-A, -B, and -C), and a variety of other systems in existence or planned by the Soviets, Japanese, Canadians, Chinese, Brazilians, Indonesians, and other. Application examples are presented that illustrate uses of 1-kilometer-resolution AVHRR data, 80-meter Landsat multispectral scanner data, 30-meter Landsat thematic mapper data, and 10-meter SPOT-simulator data. These examples address fire fuel monitoring, land cover mapping, rangeland assessment, and soils landscape mapping.

Conference Paper↗
USGS1977

Worldwide standardized seismograph network

A global network of seismographs is as indispensable to seismologists as telescopes are to astronomers. The network is used to catalog the thousands of earthquakes that occur each year and to provide the data needed for detailed studies of earthquake mechanisms, deep Earth structure, and tectonic processes. Like astronomy, seismology is an observational science, and most of the scientific advances have been preceded by improvements in instrument technology. To be useful for seismic studies, new technology must be applied on a global scale. During the past two decades, there has been notable success in meeting this objective. The network that exists today (fig. 1) is a vital scientific resource. Continued innovations and improvements are needed to insure that its keeps pace with the data needs of the seismological community.

Earthquake Information Bulletin (USGS)↗
USGS2024

Earth’s free surface complicates inference of absolute stress from earthquake-Induced stress rotations

The stress redistribution from an earthquake can produce localized measurable rotations of the principal stress axes if the absolute level of differential stress in the crust in on the order of the earthquake stress drop. Two simple analytic solutions have been developed to estimate the differential stress from an observed stress rotation. However, each has assumptions that may not be accurate near Earth’s free surface. I model synthetic earthquakes in an elastic half-space, and show that the assumptions of the methods are accurate for strike-slip earthquakes, and for deep dip-slip earthquakes. However, they are incorrect for shallow dip-slip earthquakes. I introduce a free surface correction for one of the methods for dip-slip earthquakes. I revise an analysis of stress rotations due to great subduction zone earthquakes, including this correction. The results support the original conclusion of near complete stress drop for many shallow subduction zone earthquakes.

Geophysical Research Letters↗
USGS1950

Uranium in pegmatites

Uranium and rare-earth minerals are common accessory minerals in pegmatite deposits. No domestic pegmatites have been found that are rich enough to support an economic mining operation for uranium alone; however, small quantities of uranium minerals may be recovered as by-products of feldspar or mica mining. Madagascar is the only country that has produced appreciable tonnages of uranium minerals from pegmatites.A review of the literature and observations in the domestic pegmatite districts show that the uranium and rare earth minerals generally occur in pegmatites or pegmatite units rich in potash feldspar. Recent mineralogical and structural studies of pegmatites by the U. S. Geological Survey indicate that, on the basis of geologic mapping, these units can be projected laterally and in depth with reasonable accuracy. In most places the mineral content of these units can be estimated with sufficient accuracy for development purposes.

New Mexico↗
USGS1985

ELECTROCHEMICAL PROPERTIES OF ROCKS AND MINERALS.

Many phenomena and processes in the earth sciences are a result of the electrochemical properties of rocks and minerals. Examples include formation of mineral deposits and petroleum reservoirs control of drilling muds, and success or failure of toxic waste isolation barriers. Such phenomena can be observed at a distance using geophysical techniques to measure various electrical properties of the earth.

Conference Paper↗
USGS2024

Manganese-rich sandstones as an indicator of ancient oxic lake water conditions in Gale crater, Mars

Manganese has been observed on Mars by the NASA Curiosity rover in a variety of contexts and is an important indicator of redox processes in hydrologic systems on Earth. Within the Murray formation, an ancient primarily fine-grained lacustrine sedimentary deposit in Gale crater, Mars, have observed up to 45× enrichment in manganese and up to 1.5× enrichment in iron within coarser grained bedrock targets compared to the mean Murray sediment composition. This enrichment in manganese coincides with the transition between two stratigraphic units within the Murray: Sutton Island, interpreted as a lake margin environment, and Blunts Point, interpreted as a lake environment. On Earth, lacustrine environments are common locations of manganese precipitation due to highly oxidizing conditions in the lakes. Here, we explore three mechanisms for ferromanganese oxide precipitation at this location: authigenic precipitation from lake water along a lake shore, authigenic precipitation from reduced groundwater discharging through porous sands along a lake shore, and early diagenetic precipitation from groundwater through porous sands. All three scenarios require highly oxidizing conditions and we discuss oxidants that may be responsible for the oxidation and precipitation of manganese oxides. This work has important implications for the habitability of Mars to microbes that could have used Mn redox reactions, owing to its multiple redox states, as an energy source for metabolism.

JGR Planets↗
USGS2006

Absolute calibration accuracy of L4 TM and L5 TM sensor image pairs

The Landsat suite of satellites has collected the longest continuous archive of multispectral data of any land-observing space program. From the Landsat program's inception in 1972 to the present, the Earth science user community has benefited from a historical record of remotely sensed data. However, little attention has been paid to ensuring that the data are calibrated and comparable from mission to mission, Launched in 1982 and 1984 respectively, the Landsat 4 (L4) and Landsat 5 (L5) Thematic Mappers (TM) are the backbone of an extensive archive of moderate resolution Earth imagery. To evaluate the "current" absolute accuracy of these two sensors, image pairs from the L5 TM and L4 TM sensors were compared. The approach involves comparing image statistics derived from large common areas observed eight days apart by the two sensors. The average percent differences in reflectance estimates obtained from the L4 TM agree with those from the L5 TM to within 15 percent. Additional work to characterize the absolute differences between the two sensors over the entire mission is in progress.

Conference Paper↗
USGS2006

Simple equations guide high-frequency surface-wave investigation techniques

We discuss five useful equations related to high-frequency surface-wave techniques and their implications in practice. These equations are theoretical results from published literature regarding source selection, data-acquisition parameters, resolution of a dispersion curve image in the frequency-velocity domain, and the cut-off frequency of high modes. The first equation suggests Rayleigh waves appear in the shortest offset when a source is located on the ground surface, which supports our observations that surface impact sources are the best source for surface-wave techniques. The second and third equations, based on the layered earth model, reveal a relationship between the optimal nearest offset in Rayleigh-wave data acquisition and seismic setting - the observed maximum and minimum phase velocities, and the maximum wavelength. Comparison among data acquired with different offsets at one test site confirms the better data were acquired with the suggested optimal nearest offset. The fourth equation illustrates that resolution of a dispersion curve image at a given frequency is directly proportional to the product of a length of a geophone array and the frequency. We used real-world data to verify the fourth equation. The last equation shows that the cut-off frequency of high modes of Love waves for a two-layer model is determined by shear-wave velocities and the thickness of the top layer. We applied this equation to Rayleigh waves and multi-layer models with the average velocity and obtained encouraging results. This equation not only endows with a criterion to distinguish high modes from numerical artifacts but also provides a straightforward means to resolve the depth to the half space of a layered earth model. ?? 2005 Elsevier Ltd. All rights reserved.

Soil Dynamics and Earthquake Engineering↗
USGS2013

U.S. Geological Survey climate and land use change science strategy—A framework for understanding and responding to global change

Executive Summary The U.S. Geological Survey (USGS), a nonregulatory Federal science agency with national scope and responsibilities, is uniquely positioned to serve the Nation’s needs in understanding and responding to global change, including changes in climate, water availability, sea level, land use and land cover, ecosystems, and global biogeochemical cycles. Global change is among the most challenging and formidable issues confronting our Nation and society. Scientists agree that global environmental changes during this century will have far-reaching societal implications (Intergovernmental Panel on Climate Change, 2007; U.S. Global Change Research Program, 2009). In the face of these challenges, the Nation can benefit greatly by using natural science information in decisionmaking. Since the passage of the U.S. Global Change Research Act of 1990, the USGS has made substantial scientific contributions to understanding the interactive living and nonliving components of the Earth system. USGS natural science activities have led to fundamental advances in observing and understanding climate and land-cover change and the effects these changes have on ecosystems, natural-resource availability, and societal sustainability. Most of these major advances were pursued in partnership with other organizations within and outside the Department of the Interior. The inherent value of partnerships with other U.S. Global Change Research Program agencies and natural-resource managers is emphasized in all aspects of the planning and implementation of this Science Strategy for the coming decade. Over the next 10 years, the USGS will make substantial contributions to understanding how Earth systems interact, respond to, and cause global change. The USGS will work with science partners, decisionmakers, and resource managers at local to international levels (including Native American tribes) to improve understanding of past and present change; develop relevant forecasts; and identify those lands, resources, and communities most vulnerable to global change processes. Science will play an essential role in helping communities and land and resource managers understand local to global implications, anticipate effects, prepare for changes, and reduce the risks associated with decisionmaking in a changing environment. USGS partners and stakeholders will benefit from the data, predictive models, and decision-support products and services resulting from the implementation of this strategy. This Science Strategy recognizes core USGS strengths that are applied to key societal problems. It establishes seven goals for USGS global change science and strategic actions that may be implemented in the short term (1–5 years) and the longer term (5–10 years) to improve our understanding of the following areas of inquiry: Rates, causes, and impacts of past global changes; The global carbon cycle; Biogeochemical cycles and their coupled interactions; Land-use and land-cover change rates, causes, and consequences; Droughts, floods, and water availability under changing land-use and climatic conditions; Coastal response to sea-level rise, climatic change, and human development; and Biological responses to global change. In addition to the seven thematic goals, we address the central role of monitoring in accordance with the USGS Science Strategy recommendation that global change research should rely on existing “…decades of observational data and long-term records to interpret consequences of climate variability and change to the Nation’s biological populations, ecosystems, and land and water resources” (U.S. Geological Survey, 2007, p. 19). We also briefly describe specific needs and opportunities for coordinating USGS global change science among USGS Mission Areas and address the need for a comprehensive and sustained communications strategy.

Circular↗
USGS2002

Cassini/VIMS observations of the moon

In this paper, we present preliminary scientific results obtained from the analysis of VIMS (Visible and Infrared Mapping Spectrometer) lunar images and spectra. These data were obtained during the Cassini Earth flyby in August 1999. Spectral ratios have been produced in order to derive lunar mineralogical maps. Some spectra observed at the north-east lunar limb, show few unusual absorption features located at 0.357, 0.430 and 0.452 ??m, the origin of which is presently unknown. ?? 2002 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

Advances in Space Research↗