SEARCH · Geology Reports

Results for “Surface Water Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

USGS2022

Quantifying streamflow depletion from groundwater pumping: A practical review of past and emerging approaches for water management

Groundwater pumping can cause reductions in streamflow (“streamflow depletion”) that must be quantified for conjunctive management of groundwater and surface water resources. However, streamflow depletion cannot be measured directly and is challenging to estimate because pumping impacts are masked by streamflow variability due to other factors. Here, we conduct a management-focused review of analytical, numerical, and statistical models for estimating streamflow depletion and highlight promising emerging approaches. Analytical models are easy to implement, but include many assumptions about the stream and aquifer. Numerical models are widely used for streamflow depletion assessment and can represent many processes affecting streamflow, but have high data, expertise, and computational needs. Statistical approaches are a historically underutilized tool due to difficulty in attributing causality, but emerging causal inference techniques merit future research and development. We propose that streamflow depletion-related management questions can be divided into three broad categories (attribution, impacts, and mitigation) that influence which methodology is most appropriate. We then develop decision criteria for method selection based on suitability for local conditions and the management goal, actionability with current or obtainable data and resources, transparency with respect to process and uncertainties, and reproducibility.

Journal of the American Water Resources Associatio↗

USGS2004

Section 1. Simulation of surface-water integrated flow and transport in two-dimensions: SWIFT2D user's manual

A numerical model for simulation of surface-water integrated flow and transport in two (horizontal-space) dimensions is documented. The model solves vertically integrated forms of the equations of mass and momentum conservation and solute transport equations for heat, salt, and constituent fluxes. An equation of state for salt balance directly couples solution of the hydrodynamic and transport equations to account for the horizontal density gradient effects of salt concentrations on flow. The model can be used to simulate the hydrodynamics, transport, and water quality of well-mixed bodies of water, such as estuaries, coastal seas, harbors, lakes, rivers, and inland waterways. The finite-difference model can be applied to geographical areas bounded by any combination of closed land or open water boundaries. The simulation program accounts for sources of internal discharges (such as tributary rivers or hydraulic outfalls), tidal flats, islands, dams, and movable flow barriers or sluices. Water-quality computations can treat reactive and (or) conservative constituents simultaneously. Input requirements include bathymetric and topographic data defining land-surface elevations, time-varying water level or flow conditions at open boundaries, and hydraulic coefficients. Optional input includes the geometry of hydraulic barriers and constituent concentrations at open boundaries. Time-dependent water level, flow, and constituent-concentration data are required for model calibration and verification. Model output consists of printed reports and digital files of numerical results in forms suitable for postprocessing by graphical software programs and (or) scientific visualization packages. The model is compatible with most mainframe, workstation, mini- and micro-computer operating systems and FORTRAN compilers. This report defines the mathematical formulation and computational features of the model, explains the solution technique and related model constraints, describes the model framework, documents the type and format of inputs required, and identifies the type and format of output available.

Techniques and Methods↗

USGS2003

Patterns and sources of fecal coliform bacteria in three streams in Virginia, 1999-2000

Surface-water impairment by fecal coliform bacteria is a water-quality issue of national scope and importance. In Virginia, more than 175 stream segments are on the Commonwealth's 1998 303(d) list of impaired waters because of elevated concentrations of fecal coliform bacteria. These fecal coliform-impaired stream segments require the development of total maximum daily load (TMDL) and associated implementation plans, but accurate information on the sources contributing these bacteria usually is lacking. The development of defendable fecal coliform TMDLs and management plans can benefit from reliable information on the bacteria sources that are responsible for the impairment. Bacterial source tracking (BST) recently has emerged as a powerful tool for identifying the sources of fecal coliform bacteria that impair surface waters. In a demonstration of BST technology, three watersheds on Virginia's 1998 303(d) list with diverse land-use practices (and potentially diverse bacteria sources) were studied. Accotink Creek is dominated by urban land uses, Christians Creek by agricultural land uses, and Blacks Run is affected by both urban and agricultural land uses. During the 20-month field study (March 1999?October 2000), water samples were collected from each stream during a range of flow conditions and seasons. For each sample, specific conductance, dissolved oxygen concentration, pH, turbidity, flow, and water temperature were measured. Fecal coliform concentrations of each water sample were determined using the membrane filtration technique. Next, Escherichia coli (E. coli) were isolated from the fecal coliform bacteria and their sources were identified using ribotyping (a method of 'genetic fingerprinting'). Study results provide enhanced understanding of the concentrations and sources of fecal coliform bacteria in these three watersheds. Continuum sampling (sampling along the length of the streams) indicated that elevated concentrations of fecal coliform bacteria (maximum observed concentration of 290,000 colonies/100 milliliters (col/100mL) could occur along the entire length of each stream, and that the samples collected at the downstream monitoring station of each stream were generally representative of the entire upstream reach. Seasonal patterns were observed in the base-flow fecal coliform concentrations of all streams; concentrations were typically highest in the summer and lowest in the winter. Fecal coliform concentrations were lowest during periods of base flow (typically 200?2,000 col/100mL) and increased by 3?4 orders of magnitude during storm events (as high as 700,000 col/100mL). Multiple linear regression models were developed to predict fecal coliform concentrations as a function of streamflow and other water-quality parameters. The source tracking technique provided identification of bacteria contributions from diverse sources that included (but were not limited to) humans, cattle, poultry, horses, dogs, cats, geese, ducks, raccoons, and deer. Seasonal patterns were observed in the contributions of cattle and poultry sources. There were relations between the identified sources of fecal coliform bacteria and the land-use practices within each watershed. There were only minor differences in the distribution of bacteria sources between low-flow periods and high-flow periods. A coupled approach that utilized both a large available source library and a smaller, location-specific source library provided the most success in identifying the unknown E. coli isolates. BST data should provide valuable support and guidance for producing more defendable and scientifically rigorous watershed models. Incorporation of these bacteria-source data into watershed management strategies also should result in the selection of more efficient source-reduction scenarios for improving water quality.

Water-Resources Investigations Report↗

USGS2008

Mid-Pliocene planktic foraminifer census data from Ocean Drilling Program Hole 1237C

The U.S. Geological Survey is conducting a long-term study of mid-Pliocene climatic and oceanographic conditions. One of the key elements of the study involves the use of quantitative composition of planktic foraminifer assemblages in conjunction with other proxies to constrain estimates of sea-surface temperature (SST) and to identify major oceanographic boundaries and water masses. Raw census data are made available as soon as possible after analysis through a series of reports that provide the basic data for future work. In this report we present raw census data (table 1) for planktic foraminifer assemblages in 19 samples from Ocean Drilling Program (ODP) Hole 1237C. ODP Hole 1237C is located on the Peruvian margin at 16? 0.4216'S., 76? 22.6854'W., in 3211.9 meters of water (fig. 1). A variety of statistical methods have been developed to transform foraminiferal census data in Pliocene sequences into quantitative estimates of Pliocene SST. Details of statistical techniques, taxonomic groupings, and oceanographic interpretations are presented in more formal publications.

Data Series↗

USGS2013

Characterization of major lithologic units underlying the lower American River using water-borne continuous resistivity profiling, Sacramento, California, June 2008

The levee system of the lower American River in Sacramento, California, is situated above a mixed lithology of alluvial deposits that range from clay to gravel. In addition, sand deposits related to hydraulic mining activities underlie the floodplain and are preferentially prone to scour during high-flow events. In contrast, sections of the American River channel have been observed to be scour resistant. In this study, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, explores the resistivity structure of the American River channel to characterize the extent and thickness of lithologic units that may impact the scour potential of the area. Likely lithologic structures are interpreted, but these interpretations are non-unique and cannot be directly related to scour potential. Additional geotechnical data would provide insightful data on the scour potential of certain lithologic units. Additional interpretation of the resistivity data with respect to these results may improve interpretations of lithology and scour potential throughout the American River channel and floodplain. Resistivity data were collected in three profiles along the American River using a water-borne continuous resistivity profiling technique. After processing and modeling these data, inverted resistivity profiles were used to make interpretations about the extent and thickness of possible lithologic units. In general, an intermittent high-resistivity layer likely indicative of sand or gravel deposits extends to a depth of around 30 feet (9 meters) and is underlain by a consistent low-resistivity layer that likely indicates a high-clay content unit that extends below the depth of investigation (60 feet or 18 meters). Immediately upstream of the Watt Avenue Bridge, the high-resistivity layer is absent, and the low-resistivity layer extends to the surface where a scour-resistant layer has been previously observed in the river bed.

California↗

USGS2006

Evaluation of baseline ground-water conditions in the Mosteiros, Ribeira Paul, and Ribeira Fajã Basins, Republic of Cape Verde, West Africa, 2005-06

This report documents current (2005-06) baseline ground-water conditions in three basins within the West African Republic of Cape Verde (Mosteiros on Fogo, Ribeira Paul on Santo Antão, and Ribeira Fajã on São Nicolau) based on existing data and additional data collected during this study. Ground-water conditions (indicators) include ground-water levels, ground-water recharge altitude, ground-water discharge amounts, ground-water age (residence time), and ground-water quality. These indicators are needed to evaluate (1) long-term changes in ground-water resources or water quality caused by planned ground-water development associated with agricultural projects in these basins, and (2) the feasibility of artificial recharge as a mitigation strategy to offset the potentially declining water levels associated with increased ground-water development. Ground-water levels in all three basins vary from less than a few meters to more than 170 meters below land surface. Continuous recorder and electric tape measurements at three monitoring wells (one per basin) showed variations between August 2005 and June 2006 of as much as 1.8 meters. Few historical water-level data were available for the Mosteiros or Ribeira Paul Basins. Historical records from Ribeira Fajã indicate very large ground-water declines during the 1980s and early 1990s, associated with dewatering of the Galleria Fajã tunnel. More-recent data indicate that ground-water levels in Ribeira Fajã have reached a new equilibrium, remaining fairly constant since the late 1990s. Because of the scarcity of observation wells within each basin, water-level data were combined with other techniques to evaluate ground-water conditions. These techniques include the quantification of ground-water discharge (well withdrawals, spring discharge, seepage to springs, and gallery drainage), field water-quality measurements, and the use of environmental tracers to evaluate sources of aquifer recharge, flow paths, and ground-water residence times. In the Mosteiros Basin, measured well and spring discharge is about 220,000 cubic meters per year. For the Ribeira Paul Basin, measured well discharge, spring discharge, and ground-water seepage to springs is about 1,600,000 cubic meters per year. Ribeira Fajã Basin is the driest of the three basins with a precipitation rate of about half that of the other two basins. The only measurable ground-water discharge from this basin is from Galleria Fajã, estimated to be about 150,000 cubic meters per year. Measured discharge for all three basins does not include submarine outflow or agricultural/phreatophyte consumptive use (Paul Basin, only) and is assumed to be less than total ground-water discharge. Ground-water ages indicate that recharge to wells and springs occurred from more than 50 years ago at some locations to within the past decade at other sites. Ground water in Paul is younger than that in the other two basins, indicating that recharge generally occurred within the past 50 years. Ground water at all the dateable sites using tritium/helium in both the Mosteiros and Ribeira Fajã Basins show that recharge occurred more than 50 years before the sampling dates. Ground-water tritium/helium age dating was not possible at some sites in Mosteiros and Ribeira Fajã Basins because of the presence of helium in the aquifer derived from the mantle or aquifer matrix. However, this helium was useful for accurate age dating of the unaffected ground-water sites. Dissolved gases indicate that most ground-water recharge occurs at mid and high altitudes within all three basins; calculated recharge altitudes ranged from 700 to more than 2,000 meters. In the Mosteiros and Ribeira Fajã Basins, recharge altitudes are much higher than the wells and springs. This suggests that it may take many years for artificial recharge to result in a beneficial impact on the aquifer in areas where the agricultural projects are implemented. Recharge altitudes in Paul Basin also were generally higher than their respective ground-water discharge sampling sites except for one spring, Seladinha. This spring, in combination with generally younger ground-water ages in Paul, indicates the existence of some short flow paths where artificial recharge may possibly enhance available water resources within a few years. The salinity of wells and springs is generally low in the Ribeira Paul and Ribeira Fajã Basins, but somewhat higher in Mosteiros Basin. Specific-conductance measurements of wells and springs in Ribeira Paul and Ribeira Fajã ranged from about 200 to 700 microsiemens per centimeter at 25 degrees Celsius. Although the Monte Vermelho spring in Mosteiros Basin also has very low salinity (200 microsiemens per centimeter at 25 degrees Celsius), water from the wells along the coastal plain has specific-conductance measurements of as much as 16,000 microsiemens per centimeter at 25 degrees Celsius. These higher values indicate some brackish water intrusion. Additional ground-water development of the Mosteiros coastal plain may exacerbate this situation.

Mosteiros basin, Ribeira Fajã basin, Ribeira Paul ↗

USGS2002

Chapter A5. Processing of water samples

The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter addresses methods to be used in processing water samples to be analyzed for inorganic and organic chemical substances, including the bottling of composite, pumped, and bailed samples and subsamples; sample filtration; solid-phase extraction for pesticide analyses; sample preservation; and sample handling and shipping. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.'

Techniques of Water-Resources Investigations↗

USGS2010

Simulated groundwater flow in the Ogallala and Arikaree aquifers, Rosebud Indian Reservation area, South Dakota – Revisions with data through water year 2008 and simulations of potential future scenarios

The Ogallala and Arikaree aquifers are important water resources in the Rosebud Indian Reservation area and are used extensively for irrigation, municipal, and domestic water supplies. Drought or increased withdrawals from the Ogallala and Arikaree aquifers in the Rosebud Indian Reservation area have the potential to affect water levels in these aquifers. This report documents revisions and recalibration of a previously published three-dimensional, numerical groundwater-flow model for this area. Data for a 30-year period (water years 1979 through 2008) were used in steady-state and transient numerical simulations of groundwater flow. In the revised model, revisions include (1) extension of the transient calibration period by 10 years, (2) the use of inverse modeling for steady-state calibration, (3) model calibration to base flow for an additional four surface-water drainage basins, (4) improved estimation of transient aquifer recharge, (5) improved delineation of vegetation types, and (6) reduced cell size near large capacity water-supply wells. In addition, potential future scenarios were simulated to assess the potential effects of drought and increased groundwater withdrawals. The model comprised two layers: the upper layer represented the Ogallala aquifer and the lower layer represented the Arikaree aquifer. The model’s grid had 168 rows and 202 columns, most of which were 1,640 feet (500 meters) wide, with narrower rows and columns near large water-supply wells. Recharge to the Ogallala and Arikaree aquifers occurs from precipitation on the outcrop areas. The average recharge rates used for the steady-state simulation were 2.91 and 1.45 inches per year for the Ogallala aquifer and Arikaree aquifer, respectively, for a total rate of 255.4 cubic feet per second (ft 3 /s). Discharge from the aquifers occurs through evapotranspiration, discharge to streams as base flow and spring flow, and well withdrawals. Discharge rates for the steady-state simulation were 171.3 ft 3 /s for evapotranspiration, 74.4 ft 3 /s for net outflow to streams and springs, and 11.6 ft 3 /s for well withdrawals. Estimated horizontal hydraulic conductivity used for the numerical model ranged from 0.2 to 84.4 feet per day (ft/d) in the Ogallala aquifer and from 0.1 to 4.3 ft/d in the Arikaree aquifer. A uniform vertical hydraulic conductivity value of 4.2x10 -4 ft/d was estimated for the Ogallala aquifer. Vertical hydraulic conductivity was estimated for five zones in the Arikaree aquifer and ranged from 8.8x10 -5 to 3.7 ft/d. Average rates of recharge, maximum evapotranspiration, and well withdrawals were included in the steady-state simulation, whereas the time-varying rates were included in the transient simulation. Inverse modeling techniques were used for steady-state model calibration. These methods were designed to estimate parameter values that are, statistically, the most likely set of values to result in the smallest differences between simulated and observed hydraulic heads and base-flow discharges. For the steady-state simulation, the root mean square error for simulated hydraulic heads for all 383 wells was 27.3 feet. Simulated hydraulic heads were within ±50 feet of observed values for 93 percent of the wells. The potentiometric surfaces of the two aquifers calculated by the steady-state simulation established initial conditions for the transient simulation. For the transient simulation, the difference between the simulated and observed means for hydrographs was within ±40 feet for 98 percent of 44 observation wells. A sensitivity analysis was used to examine the response of the calibrated steady-state model to changes in model parameters including horizontal and vertical hydraulic conductivity, evapotranspiration, recharge, and riverbed conductance. The model was most sensitive to recharge and maximum evapotranspiration and least sensitive to riverbed and spring conductances. To simulate a potential future drought scenario, a synthetic recharge record was created, the mean of which was equal to 64 percent of the average estimated recharge rate for the 30-year calibration period. This synthetic recharge record was used to simulate the last 20 years of the calibration period under drought conditions. Compared with results of the calibrated model, decreases in hydraulic-head values for the drought scenario at the end of the simulation period were as much as 39 feet for the Ogallala aquifer. To simulate the effects of potential increases in pumping, well withdrawal rates were increased by 50 percent from those estimated for the 30-year calibration period for the last 20 years of the calibration period. Compared with results of the calibrated model, decreases in hydraulic-head values for the scenario of increased pumping at the end of the simulation period were as much as 13 feet for the Ogallala aquifer. This numerical model is suitable as a tool to help understand the flow system, to help confirm that previous estimates of aquifer properties were reasonable, and to estimate aquifer properties in areas without data. The model also is useful to help assess the effects of drought and increases in pumping by simulations of these scenarios, the results of which are not precise but may be considered when making water management decisions.

South Dakota↗

USGS2025

Over, under, and through: Hydrologic connectivity and the future of coastal landscape salinization

Seawater intrusion (SWI) affects coastal landscapes worldwide. Here we describe the hydrologic pathways through which SWI occurs - over land via storm surge or tidal flooding, under land via groundwater transport, and through watersheds via natural and artificial surface water channels—and how human modifications to those pathways alter patterns of SWI. We present an approach to advance understanding of spatiotemporal patterns of salinization that integrates these hydrologic pathways, their interactions, and how humans modify them. We use examples across the East Coast of the United States that exemplify mechanisms of salinization that have been reported around the planet to illustrate how hydrologic connectivity and human modifications alter patterns of SWI. Finally, we suggest a path for advancing SWI science that includes (a) deploying standardized and well-distributed sensor networks at local to global scales that intentionally track SWI fronts, (b) employing remote sensing and geospatial imaging techniques targeted at integrating above and belowground patterns of SWI, and (c) continuing to develop data analysis and model-data fusion techniques to measure the extent, understand the effects, and predict the future of coastal salinization.

Water Resources Research↗

USGS1996

Water-quality, streamflow, and meteorological data for the Tualatin River Basin, Oregon, 1991-93

Surface-water-quality data, ground-water-quality data, streamflow data, field measurements, aquatic-biology data, meteorological data, and quality-assurance data were collected in the Tualatin River Basin from 1991 to 1993 by the U.S. Geological Survey (USGS) and the Unified Sewerage Agency of Washington County, Oregon (USA). The data from that study, which are part of this report, are presented in American Standard Code for Information Interchange (ASCII) format in subject-specific data files on a Compact Disk-Read Only Memory (CD-ROM). The text of this report describes the objectives of the study, the location of sampling sites, sample-collection and processing techniques, equipment used, laboratory analytical methods, and quality-assurance procedures. The data files on CD-ROM contain the analytical results of water samples collected in the Tualatin River Basin, streamflow measurements of the main-stem Tualatin River and its major tributaries, flow data from the USA wastewater-treatment plants, flow data from stations that divert water from the main-stem Tualatin River, aquatic-biology data, and meteorological data from the Tualatin Valley Irrigation District (TVID) Agrimet Weather Station located in Verboort, Oregon. Specific information regarding the contents of each data file is given in the text. The data files use a series of letter codes that distinguish each line of data. These codes are defined in data tables accompanying the text. Presenting data on CD-ROM offers several advantages: (1) the data can be accessed easily and manipulated by computers, (2) the data can be distributed readily over computer networks, and (3) the data may be more easily transported and stored than a large printed report. These data have been used by the USGS to (1) identify the sources, transport, and fate of nutrients in the Tualatin River Basin, (2) quantify relations among nutrient loads, algal growth, low dissolved-oxygen concentrations, and high pH, and (3) develop and calibrate a water- quality model that allows managers to test options for alleviating water-quality problems.

Oregon↗

USGS2003

Arsenic speciation and reactivity in poultry litter

Recent U.S. government action to lower the maximum concentration levels (MCL) of total arsenic (As) (10 ppb) in drinking water has raised serious concerns about the agricultural use of As-containing biosolids such as poultry litter (PL). In this study, solid-state chemical speciation, desorbability, and total levels of As in PL and long-term amended soils were investigated using novel synchrotron-based probing techniques (microfocused (μ) synchrotron X-ray fluorescence (SXRF) and μ-X-ray absorption near-edge structure (XANES) spectroscopies) coupled with chemical digestion and batch experiments. The total As levels in the PL were as high as ≈50 mg kg - 1 , and As(II/III and V) was always concentrated in abundant needle-shaped microscopic particles (≈20 μm × 850 μm) associated with Ca, Cu, and Fe and to a lesser extent with S, Cl, and Zn. Post-edge XANES features of litter particles are dissimilar to those of the organo-As(V) compound in poultry feed (i.e., roxarsone), suggesting possible degradation/transformation of roxarsone in the litter and/or in poultry digestive tracts. The extent of As desorption from the litter increased with increasing time and pH from 4.5 to 7, but at most 15% of the total As was released after 5 d at pH 7, indicating the presence of insoluble phases and/or strongly retained soluble compounds. No significant As accumulation (<15 mg kg - 1 ) was found in long-term PL-amended agricultural surface soils. This suggests that As in the PL may have undergone surface and subsurface transport processes. Our research results raise concerns about long-term PL amendment effects on As contamination in surrounding soil−water environments.

Environmental Science & Technology↗

USGS2003

Shuttle Radar Topography Mission (SRTM)

Under an agreement with the National Aeronautics and Space Administration (NASA) and the Department of Defense's National Imagery and Mapping Agency (NIMA), the U.S. Geological Survey (USGS) is now distributing elevation data from the Shuttle Radar Topography Mission (SRTM). The SRTM is a joint project between NASA and NIMA to map the Earth's land surface in three dimensions at a level of detail unprecedented for such a large area. Flown aboard the NASA Space Shuttle Endeavour February 11-22, 2000, the SRTM successfully collected data over 80 percent of the Earth's land surface, for most of the area between 60? N. and 56? S. latitude. The SRTM hardware included the Spaceborne Imaging Radar-C (SIR-C) and X-band Synthetic Aperture Radar (X-SAR) systems that had flown twice previously on other space shuttle missions. The SRTM data were collected specifically with a technique known as interferometry that allows image data from dual radar antennas to be processed for the extraction of ground heights.

Fact Sheet↗

USGS2026

Field sampling guidelines for developing and verifying satellite remote sensing chlorophyll a concentration and fluorescence models in inland waters

Harmful algal blooms are increasing in frequency in inland waters across the United States, resulting in a need to monitor phytoplankton bloom events to track ecosystem health and productivity. Remote sensing of chlorophyll a values offers a cost-effective and powerful method for early detection and characterization of bloom events and serves as an overall indicator of water quality and trophic state, with regular, repeated sampling of landscape-wide, high spatial resolution measurements. Field measurements are necessary for developing and verifying chlorophyll a retrieval models. For model verification, chlorophyll a concentration or fluorescence and light attenuation measurements are needed; for model development, turbidity and colored dissolved organic matter concentration measurements are additionally needed; and for model development and verification, radiometric measurements, taxonomic identification of phytoplankton, inherent optical properties, and cyanotoxin concentration are further measurements that can provide context. This report outlines detailed methods and priority considerations for collecting high-quality field data in inland waters (defined as rivers, lakes, reservoirs, estuaries, streams, and wetlands). The described methods include best practices for collecting and preparing discretely collected water samples and for calibration, maintenance, and quality assurance and quality control of field sensors. Whereas the priorities will vary between applications, some general guidelines are to collect field samples (1) as close in time to a satellite overpass as possible, (2) from representative areas of the waterbody to capture the range of spatial variability, and (3) near the surface to match remote sensing reflectance data.

Techniques and Methods↗

USGS2019

Temporal and abiotic fluctuations may be preventing successful rehabilitation of soil-stabilizing biocrust communities

Land degradation is a persistent ecological problem in many arid and semi-arid systems globally (drylands hereafter). Most instances of dryland degradation include some form of soil disturbance and/or soil erosion, which can hinder vegetation establishment and reduce ecosystem productivity. To combat soil erosion, researchers have identified a need for rehabilitation of biological soil crusts (biocrusts), a globally-relevant community of organisms aggregating the soil surface and building soil fertility. The impact of plant and biocrust cover was tested on soil erosion potential in the piñon-juniper woodlands of Bandelier National Monument, NM. Biocrusts were found to be similarly influential to vascular plants in reducing erosion, largely acting by promoting surface roughness. The potential to rehabilitate biocrusts within the Monument was also tested. In a full factorial design, plots were inoculated on eroding soils before the summer monsoon with greenhouse-cultured biocrusts, and administered the erosion intervention treatments of overland water flow barriers (flashing), slash placement, and seeding of vascular plants. Although significant and dynamic changes to soil stability, penetration resistance, and extractable soil nutrients were observed through time, no strong effects with the addition of inoculum, seeding, or erosion intervention treatments were seen. These results suggest possible ways forward to successfully rehabilitate biocrust, including varying the timing of biocrust application, amending inoculum application with different types of soil stabilization techniques, and adding nutrients to soils. The insights gleaned from the lack of response brings us closer to developing effective techniques to arrest soil loss in these important social-ecological dryland systems.

Ecological Applications↗

USGS2016

Synthesis of soil-hydraulic properties and infiltration timescales in wildfire-affected soils

We collected soil-hydraulic property data from the literature for wildfire-affected soils, ash, and unburned soils. These data were used to calculate metrics and timescales of hydrologic response related to infiltration and surface runoff generation. Sorptivity ( S ) and wetting front potential (Ψ f ) were significantly different (lower) in burned soils compared with unburned soils, whereas field-saturated hydraulic conductivity ( K fs ) was not significantly different. The magnitude and duration of the influence of capillarity during infiltration was greatly reduced in burned soils, causing faster ponding times in response to rainfall. Ash had large values of S and K fs but moderate values of Ψ f , compared with unburned and burned soils, indicating ash has long ponding times in response to rainfall. The ratio of S 2 /K fs was nearly constant (~100 mm) for unburned soils but more variable in burned soils, suggesting that unburned soils have a balance between gravity and capillarity contributions to infiltration that may depend on soil organic matter, whereas in burned soils the gravity contribution to infiltration is greater. Changes in S and K fs in burned soils act synergistically to reduce infiltration and accelerate and amplify surface runoff generation. Synthesis of these findings identifies three key areas for future research. First, short timescales of capillary influences on infiltration indicate the need for better measurements of infiltration at times less than 1 min to accurately characterize S in burned soils. Second, using parameter values, such as Ψ f , from unburned areas could produce substantial errors in hydrologic modeling when used without adjustment for wildfire effects, causing parameter compensation and resulting underestimation of K fs . Third, more thorough measurement campaigns that capture soil-structural changes, organic matter impacts, quantitative water repellency trends, and soil-water content along with soil-hydraulic properties could drive the development of better techniques for numerically simulating infiltration in burned areas.

Hydrological Processes↗

USGS2009

Shuttle Radar Topography Mission (SRTM)

Under an agreement with the National Aeronautics and Space Administration (NASA) and the Department of Defense's National Geospatial-Intelligence Agency (NGA), the U.S. Geological Survey (USGS) is distributing elevation data from the Shuttle Radar Topography Mission (SRTM). The SRTM is a joint project of NASA and NGA to map the Earth's land surface in three dimensions at an unprecedented level of detail. As part of space shuttle Endeavour's flight during February 11-22, 2000, the SRTM successfully collected data over 80 percent of the Earth's land surface for most of the area between latitudes 60 degrees north and 56 degrees south. The SRTM hardware included the Spaceborne Imaging Radar-C (SIR-C) and X-band Synthetic Aperture Radar (X-SAR) systems that had flown twice previously on other space shuttle missions. The SRTM data were collected with a technique known as interferometry that allows image data from dual radar antennas to be processed for the extraction of ground heights.

Fact Sheet↗

USGS2016

Spatially explicit rangeland erosion monitoring using high-resolution digital aerial imagery

Nearly all of the ecosystem services supported by rangelands, including production of livestock forage, carbon sequestration, and provisioning of clean water, are negatively impacted by soil erosion. Accordingly, monitoring the severity, spatial extent, and rate of soil erosion is essential for long-term sustainable management. Traditional field-based methods of monitoring erosion (sediment traps, erosion pins, and bridges) can be labor intensive and therefore are generally limited in spatial intensity and/or extent. There is a growing effort to monitor natural resources at broad scales, which is driving the need for new soil erosion monitoring tools. One remote-sensing technique that can be used to monitor soil movement is a time series of digital elevation models (DEMs) created using aerial photogrammetry methods. By geographically coregistering the DEMs and subtracting one surface from the other, an estimate of soil elevation change can be created. Such analysis enables spatially explicit quantification and visualization of net soil movement including erosion, deposition, and redistribution. We constructed DEMs (12-cm ground sampling distance) on the basis of aerial photography immediately before and 1 year after a vegetation removal treatment on a 31-ha Piñon-Juniper woodland in southeastern Utah to evaluate the use of aerial photography in detecting soil surface change. On average, we were able to detect surface elevation change of ± 8−9cm and greater, which was sufficient for the large amount of soil movement exhibited on the study area. Detecting more subtle soil erosion could be achieved using the same technique with higher-resolution imagery from lower-flying aircraft such as unmanned aerial vehicles. DEM differencing and process-focused field methods provided complementary information and a more complete assessment of soil loss and movement than any single technique alone. Photogrammetric DEM differencing could be used as a technique to quantitatively monitor surface change over time relative to management activities.

Utah↗

USGS2020

Hydrologic modeling to examine the influence of the forestry reclamation approach and climate change on mineland hydrology

Forests in the Appalachian region of the U.S. are threatened by a variety of short- and long-term pressures, including climate change, invasive species, and resource extraction. Surface mining for coal is one of the most important drivers of land-use change in the region, reducing native forest cover, causing forest fragmentation, eliminating intact soil, and affecting water resources. The Forestry Reclamation Approach (FRA) has been demonstrated as a successful best practice for restoring forests on mine-impacted landscapes, but little information exists on how the practice will affect hydrologic processes. A study was initiated to examine soil-water movement, as in-situ saturated hydraulic conductivity (K sat ), combined with soil porosity to quantify the potential influence on streamflow of reclaimed mines relative to an unmined, forested control site in eastern Kentucky. We compared different reclamation techniques and time since reclamation to determine the extent to which hydrologic function can be restored. We also simulated evapotranspiration at the watershed scale as a function of reclamation technique for both historical and projected (2050) climate. Results indicate that conventional grassland reclamation critically changes how soil water transitions to streamflow, primarily due to K sat variability that exceeds that measured for intact and FRA soils. Sites reclaimed using FRA exhibited a soil-water environment that was more similar to the unmined control. However, all reclaimed mine soils were thinner, retained and stored less soil water, and thus could provide less plant-available water during the growing season. The plant-available water stored in reclaimed landscapes may not be sufficient to support forest health and this is exacerbated by projected climate conditions. However, soil development under a combination of FRA techniques has the potential to mitigate this limitation.

Kentucky↗