Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Geologic map of the Snoqualmie Pass 30 x 60 minute quadrangle, Washington

The Snoqualmie Pass quadrangle lies at the north edge of a Tertiary volcanic and sedimentary cover, where the regional structural uplift to the north elevated the older rocks to erosional levels. Much of the quadrangle is underlain by folded Eocene volcanic rocks and fluvial deposts of an extensional event, and these rocks are overlain by Cascade arc volcanic rocks: mildly deformed Oligocene-Miocene rocks and undeformed younger volcanic rocks. Melanges of Paleozoic and Mesozoic rocks are exposed in structural highs in the northern part of the quadrangle. The quadrangle is traversed north to south by the Straight Creek Fault, and the probably partially coincident Darringon-Devils Mountain Fault. A rich Quaternary stratigraphy reveals events of the Frazer glaciation.

IMAP↗

Geology and occurrence of ground water at Jewel Cave National Monument, South Dakota

Jewel Cave National Monument occupies 2 square miles of a broad plateau of sedimentary rocks in western Custer County, S. Dak., and is at an altitude of about 5,400 feet above mean sea level. The sedimentary rocks that constitute the plateau range in age from Cambrian to Pennsylvanian. Rocks of Silurian and Devonian age are absent. The presence of rocks of Ordovician age has not been established definitely but they may be represented by 10 feet of sandstone directly beneath the Englewood limestone of Mississippian age. The sedimentary formations are underlain by schist of Precambrian age. Study of outcrops in the vicinity of the monument confirms the existence of a fault about 1,500 feet north of the entrance to Jewel Cave. The fault trends generally east-west across the monument and has a displacement of about 120 feet about 1 mile west of the entrance to the cave. The effect of the fault on the occurrence of ground water near the cave is not known. In addition to the spring that furnishes the present (1959) water supply for the facilities at Jewel Cave, three springs outside the monument were visited during the study. Combined yield of the 3 springs is less than 2 gpm (gallons per minute). A single test well indicates that the monument at the well site is underlain by 665 feet of limestone, dolomite, and sandstone of Paleozoic age and an undetermined thickness of quartzbiotite schist of Precambrian age. Pumping tests using a cylinder pump indicate that the test well is capable of producing 15 to 18 gpm for a short time from 2 zones of sandstone below the Englewood limestone. These sandstones are believed to present the best possibilities for development of a permanent water supply at the monument.

South Dakota↗

The Eocene-Oligocene sedimentary record in the Chesapeake Bay impact structure: Implications for climate and sea-level changes on the western Atlantic margin

A multidisciplinary investigation of the Eocene-Oligocene transition in the International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville core from the Chesapeake Bay impact basin was conducted in order to document environmental changes and sequence stratigraphic setting. Planktonic foraminifera and calcareous nannofossil biostratigraphy indicate that the Eyreville core includes an expanded upper Eocene (Biozones E15 to E16 and NP19/20 to NP21, respectively) and a condensed Oligocene-Miocene (NP24-NN1) sedimentary sequence. The Eocene-Oligocene contact corresponds to a =3-Ma-long hiatus. Eocene- Oligocene sedimentation is dominated by great diversity and varying amounts of detrital and authigenic minerals. Four sedimentary intervals are identified by lithology and mineral content: (1) A 30-m-thick, smectite- and illite-rich interval directly overlies the Exmore Formation, suggesting long-term reworking of impact debris within the Chesapeake Bay impact structure. (2) Subsequently, an increase in kaolinite content suggests erosion from soils developed during late Eocene warm and humid climate in agreement with data derived from other Atlantic sites. However, the kaolinite increase may also be explained by change to a predominant sediment input from outside the Chesapeake Bay impact structure caused by progradation of more proximal facies belts during the highstand systems tract of the late Eocene sequence E10.Spectral analysis based on gamma-ray and magnetic susceptibility logs suggests infl uence of 1.2 Ma low-amplitude oscillation of the obliquity period during the late Eocene. (3) During the latest Eocene (Biozones NP21 and E16), several lithological contacts (clay to clayey silt) occur concomitant with a prominent change in the mineralogical composition with illite as a major component: This lithological change starts close to the Biozone NP19/20-NP21 boundary and may correspond to sequence boundary E10-E11 as observed in other northwest Atlantic margin sections. It could result from a shift to more distal depositional environments and condensed sedimentation during maximum fl ooding, rather than refl ecting a climatic change in the hinterland. The distinct 1% increase of the oxygen isotopes may correspond to the short-term latest Eocene "precursor isotope event." (4) The abrupt increase of sediment grainsize, carbonate content, and abundance of authigenic minerals (glauconite) across the major unconformity that separates Eocene from Oligocene sediments in the Eyreville core refl ects deposition in shallower settings associated with erosion, winnowing, and reworking. Sediments within the central crater were affected by the rapid eustatic sea-level changes associated with the greenhouse-icehouse transition, as well as by an abrupt major uplift event and possibly enhanced current activity on the northwestern Atlantic margin. ?? 2009 The Geological Society of America.

Chesapeake Bay↗

Geology of the south-central part of the New River Mesa Quadrangle, Cave Creek area, Maricopa County, Arizona

A small area north of Cave Creek, Arizona, contains key stratigraphic and structural information bearing on the Cenozoic development of the mountain and desert regions of Arizona. The area contains elements of the two physiographic regions. The northern and western parts are high mesas containing flat lying interbedded Tertiary volcanic and sedimentary strata. These deposits can be traced southward across the physiographic boundary where they are tilted and down faulted into the desert region. Seven bedrock units were revealed by geologic mapping at 1:12,000 scale. They are, in ascending stratigraphic order: (1) a basement of Precambrian schist, granitic rock, and diabase (300 meters exposed), (2) fanglomerate derived from the crystalline rocks, of probable early and middle Oligocene age (0-152 m thick), (3) andesite of possible middle Oligocene age (225 m thick), (4) interbedded sediments and volcanics of Oligocene and Miocene age (30-320 m thick), and (5) resistant cliff forming basalt flows of middle Miocene age (125-180 m thick) that cap the high mesas. Regional uplift of an exposed Precambrian terrane occurred ~38-30 m.y. ago, accompanied by erosion of the basement and deposition of fanglomerate. Regional volcanism began ~30 m.y. ago, apparently with the extrusion of andesite, followed by deposition of alkali basaltic flows, tuff, lake beds, and alluvium in one or more irregularly closed basins, formed as a result of faulting and volcanism. A transition from calcalkali and alkali volcanism to olivine basalt volcanism of the Hickey Formation occurred approximately IS m.y. ago. The interval 14.5-11 m.y. saw the deposition of olivine basalt flows of the New River Mesa formation, which cap the high mesas and correlate with basalt of the Hickey Formation. Topographic development of the mountain-desert region boundary occurred with collapse of the basalts of the New River Mesa formation into the desert region. This may have occurred at the time of initial subsidence of the Verde basin, ~7.5 m.y. ago.

Open-File Report↗

Hydrogeologic terranes and potential yield of water to wells in the Valley and Ridge Physiographic Province in the eastern and southeastern United States

The Valley and Ridge Physiographic Province is underlain by deformed sedimentary rock of Paleozoic age including dolomite, limestone, shale, and sandstone. Regolith (soil, sediment, and weathered rock) covers the Paleozoic rock throughout most of the province. Local differences in lithology, structure, and weathering can result in four orders of magnitude variation in the water-yielding properties of the geologic units that underlie the area. Selected rock types, however, can account for a substantial part of this variation because of the unique way in which these dense, consolidated sedimentary rock types deform and weather to produce secondary openings. On the basis of relations among rock type, water-yielding openings, and water-yielding properties (as indicated by specific capacity), the regolith and consolidated rock were classified and mapped as five hydrogeologic terranes alluvium, dolomite, limestone, argillaceous carbonate rock, and siliciclastic rock. The hydrogeologic terranes are named after the predominant outcrop lithology within them. The western toe of the Blue Ridge Mountains is classified as a subdivision of the dolomite hydrogeologic terrane that may produce yields of water in excess of 1,000 gallons per minute (gal/min) to public and industrial supply wells. Specific-capacity data for homogeneous data sets, which consist of all wells that have the same characteristics in regard to casing diameter, primary use of the water, and topographic setting, revealed significant differences in water-yielding properties among the five hydrogeologic terranes. According to results of Tukey statistical tests at a probability (alpha level) of 0.05, 8 out of 10 pairs of hydrogeologic terranes (for example, alluvium/limestone) had significantly different median specific-capacity values. The median value for public and industrial supply wells in the western toe is three times greater than the value for comparable wells in the dolomite hydrogeologic terrane elsewhere. Estimates of potential yields to public and industrial supply wells were calculated from specific-capacity data for most-productive wells, which have casing diameter of 7 in. or more, discharge water primarily for public or industrial supply, and are in a valley. Median constant drawdowns, calculated from reported drawdowns, were assumed to be between 10 and 90 ft for wells completed in each of the five hydrogeologic terranes, and well-entrance losses were assumed to be negligible. Estimated interquartile ranges in potential yields to 412 mostproductive wells in the five hydrogeologic terranes were 170 to 580 gal/min, alluvium; 210 to 1,400 gal/min, dolomite; 80 to 720 gal/min, limestone; 65 to 850 gal/min, argillaceous carbonate rock; and 70 to 280 gal/min, siliciclastic rock.

Alabama, Georgia, Maryland, New Jersey, Pennsylvan↗

Three-dimensional geologic model of the northern Nevada rift and the Beowawe geothermal system, north-central Nevada

A three-dimensional (3D) geologic model of part of the northern Nevada rift encompassing the Beowawe geothermal system was developed from a series of two-dimensional (2D) geologic and geophysical models. The 3D model was constrained by local geophysical, geologic, and drill-hole information and integrates geologic and tectonic interpretations for the region. It places important geologic constraints on the extent and configuration of the active Beowawe geothermal system. The geologic framework represented in this model facilitates hydrologic modeling of the Beowawe geothermal system and evaluation of fluid flow in faults and adjacent rock units. Basin depths were determined using an iterative gravity-inversion technique that calculates the thickness of low-density, basin-filling deposits. The remaining subsurface structure was modeled using 2D potential-field modeling software. Crustal cross sections from the 2D models were generalized for use in the 3D model and consist of six stratigraphic layers defined as low-density basin sediments, volcanic rocks, basalt-andesite rocks of the northern Nevada rift, Jurassic and Cretaceous intrusive rocks, and Paleozoic siliceous and carbonate sedimentary rocks of the upper and lower plates of the Roberts Mountains allochthon, respectively. This simplified stratigraphy was combined with mapped surface geology and was extrapolated across the 3D model area. Features along the northern Nevada rift depicted by the model may represent preexisting crustal structures that controlled the locations and character of Tertiary tectonic and magmatic events related to Basin and Range extension and emplacement of the middle Miocene northern Nevada rift. Several of the geologic features represented are important components of the Beowawe geothermal system. Prominent ENE-trending faults (e.g., Malpais fault) that bound the southern edge of Whirlwind Valley, and older NNW-striking faults (e.g., Dunphy Pass and Muleshoe faults) that form major features of the model, are likely important pathways for geothermal fluids and groundwater flow from the Humboldt River, which may recharge the Beowawe system.

Nevada↗

Geologic map and profiles of the north wall of the Snake River Canyon, Thousand Springs and Niagara quadrangles, Idaho

The Snake River Plain is a broad, arcuate region of low relief that extends more than 300 mi across southern Idaho. The Snake River enters the plain near Idaho Falls and flows westward along the southern margin of the eastern Snake River Plain (fig. 1), a position mainly determined by the basaltic lava flows that erupted near the axis of the plain. The highly productive Snake River Plain aquifer north of the Snake River underlies most of the eastern plain. The aquifer is composed of basaltic rocks that are interbedded with fluvial and lacustrine sedimentary rocks. The top of the aquifer (water table) is typically less than 500 ft below the land surface but is deeper than 1,000 ft in a few areas. The Snake River has excavated a canyon into the nearly flat lying basaltic and sedimentary rocks of the eastern Snake River Plain aquifer, which discharges from the northern canyon wall as springs of variable size, spacing, and altitude. Geologic controls on springs are of importance because nearly 60 percent of the aquifer's discharge occurs as spring flow along the describes the geologic occurrence of springs along the northern wall of the Snake River canyon. This report is one of several that describes the geologic occurrence of springs along the northern wall of the Snake River canyon from Milner Dam to King Hill. To understand the local geologic controls on springs, the Water Resources Division of the U.S. Geological Survey initiated a geologic mapping project as part of their Snake River Plain Regional Aquifer System-Analysis Program. Objectives of the project were (1) to prepare a geologic map of a strip of land immediately north of the Snake River canyon, (2) to map the geology of the north canyon wall in profile, (3) to locate spring occurrences along the north side of the Snake River between Milner Sam and King Hill, and (4) to estimate spring discharge from the north wall of the canyon.

Idaho↗

Advancing geophysical techniques to image a stratigraphic hydrothermal resource

Sedimentary-hosted geothermal energy systems are permeable structural, structural-stratigraphic, and/or stratigraphic horizons with sufficient temperature for direct use and/or electricity generation. Sedimentary-hosted (i.e., stratigraphic) geothermal reservoirs may be present in multiple locations across the central and eastern Great Basin of the USA, thereby constituting a potentially large base of untapped, economically accessible energy resources. Sandia National Laboratories has partnered with a multi-disciplinary group of collaborators to evaluate a stratigraphic system in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. The goal of this study is to inform an optimized strategy for subsequent exploration and development of this and analogous resources. Building from prior Nevada Play Fairway Analysis (PFA), this team is primarily 1) collecting additional geophysical data, 2) employing novel joint geophysical inversion/modeling techniques to update existing 3D geologic models, and 3) integrating the geophysical results to produce a working, geologically constrained thermo-hydrological reservoir model. Prior PFA work highlights Steptoe Valley as a favorable resource basin that likely has both sedimentary and hydrothermal characteristics. However, there remains significant uncertainty on the nature and architecture of the resource(s) at depth, which increases the risk in exploratory drilling. Newly acquired gravity, magnetic, magnetotelluric, and controlled-source electromagnetic data, in conjunction with new and preceding geoscientific measurements and observations, are being integrated and evaluated in this study for efficacy in understanding stratigraphic geothermal resources and mitigating exploration risk. Furthermore, the influence of hydrothermal activity on sedimentary-hosted reservoirs in favorable structural settings (i.e., whether fault-controlled systems may locally enhance temperature and permeability in some deep stratigraphic reservoirs) will also be evaluated. This paper provides details and current updates on the course of this study in-progress.

Geothermal Resources Council Transactions↗

Sedimentary framework of the southern Maine inner continental shelf: Influence of glaciation and sea-level change

Although the tidally influenced shoreline of Maine is longer than that of virtually any other state, almost no research on its geology has been published. In order to go some way towards remedying this, 1500 km of high-resolution seismic reflection data and 800 km of sidescan sonar imagery have been collected. On the basis of these data and observations made during ten submersible dives, more than 800 bottom samples were collected and evaluated for texture and composition. The understanding of the sedimentary framework of the southern Maine shelf and the processes that maintain it are summarized, and future research directions to evaluate the strategic mineral potential are indicated. In the past 14,000 years, the Maine shelf has experienced a deglaciation and two marine transgressions separated by a regression. The deglaciation was accompanied by the first transgression and deposited till interbedded with up to 40 m of glaciomarine sediment (the Presumpscot Formation) across the shelf. The first transgression culminated about 12,500 yrs B.P., and its landward limit is marked by large glaciomarine deltas 50-100 km landward of the present-day coast. Sea level fell until about 9500 yrs B.P., when shorelines were cut at about the 65 m depth and some large "lowstand deltas" were deposited. Sea level has risen since then and in the general absence of modern river sediment input marine processes have reworked the older sediment. Five shelf environments have been defined in terms of their surficial sediment and stratigraphy. Nearshore ramps are sandy regions extending to about 30 m deep offshore of sandy beaches. These may be reworked lowstand deltas, and possess the thickest bodies of sand in the region. Nearshore basins are mud-filled troughs seaward of coastal areas lacking significant river input. Slumping glaciomarine deposits provide most of the Holocene mud that floors these basins. Rocky zones are extensive areas of exposed rock most common in the 30-50 m depth range. These are areas of high carbonate productivity and provide shell fragments to adjacent areas. The outer basins are muddy regions that begin at the 65 m shoreline and extend beyond the 100 m isobath to the deep Gulf of Maine. Finally, shelf valleys are former stream courses that connect nearshore ramps and basins to the outer basins. These bedrock-framed valleys are filled with sand and mud and are apparently still active conduits for the offshore movement of sediment. The mineralogy of the shelf sediment is complex, and it is not yet clear whether glacial homogenization has obliterated distinctions between river drainage basins and the adjacent shelf. Studies are continuing into northern Maine and analysis of the heavy mineralogy of the shelf sediment utilizing a 2 m Humphrey Spiral to process large grab samples and cores has begun. ?? 1989.

Marine Geology↗

Surficial geologic map of the Cuddeback Lake 30' x 60' quadrangle, San Bernardino and Kern Counties, California

The 1:100,000-scale Cuddeback Lake quadrangle is located in the western Mojave Desert north-northeast of Los Angeles, between the southern Sierra Nevada and San Bernardino Mountains, in Kern and San Bernardino Counties, California. Geomorphic features include high-relief mountains, small hills, volcanic domes, pediments, broad alluvial valleys, and dry lakes. It is one in a series of surficial geologic maps created to investigate landscape development and tectonic evolution of the northern Mojave Desert. The mapped area includes pre-Tertiary plutonic, metavolcanic, metasedimentary, and igneous rocks; Tertiary sedimentary and volcanic rocks; and Quaternary sediments and basalts. The map area includes the El Paso, Lockhart, Blackwater, and Muroc Faults, as well as the central segment of the Garlock Fault Zone. The tectonically active western Mojave Desert and the variety of surficial materials have resulted in distinctive geomorphic features and terrains. Geologic mapping shows that active faults are widespread and have diverted drainage patterns. The tectonically active area near the Garlock Fault Zone and the nearby El Paso Fault influenced development of drainage networks; base level is controlled by fault offset. Evidence of a late Tertiary drainage network is preserved in remnants of alluvial fans and paleodrainage deposits north of the El Paso Mountains, west of the Lava Mountains, and south and west of the Rand Mountains. Holocene fault activity for the Cantil Valley, Lockhart, Garlock, and Rand Mountain Faults is indicated by displaced stream channels, playa-filled depressions, scarps, and shutter ridges. Previously unmapped Holocene and Late Pleistocene fault strands identified near the Rand Mountains may represent a splay at the northwest termination of the Lockhart Fault. The Grass Valley Fault, northwest of Black Mountain, is a right-lateral, strike-slip fault that may be a splay of the Blackwater Fault. Holocene activity on the Grass Valley Fault is indicated by one displaced early Holocene stream terrace. Mapped faults in Fremont Valley are tentatively identified as surficial expressions of the buried Cantil Valley Fault.

California↗

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗

Carboniferous-Rotliegend total petroleum system; description and assessment results summary

The Anglo-Dutch Basin and the Northwest German Basin are two of the 76 priority basins assessed by the U.S. Geological Survey World Energy Project. The basins were assessed together because most of the resources occur within a single petroleum system (the Carboniferous-Rotliegend Total Petroleum System) that transcends the combined Anglo-Dutch Basin and Northwest German Basin boundary. The juxtaposition of thermally mature coals and carbonaceous shales of the Carboniferous Coal Measures (source rock), sandstones of the Rotliegend sedimentary systems (reservoir rock), and the Zechstein evaporites (seal) define the total petroleum system (TPS). Three assessment units were defined, based upon technological and geographic (rather than geological) criteria, that subdivide the Carboniferous-Rotliegend Total Petroleum System. These assessment units are (1) the Southern Permian Basin-Offshore Europe Assessment Unit, (2) the Southern Permian Basin Onshore Europe Assessment Unit, and (3) the Southern Permian Basin Onshore United Kingdom Assessment Unit. Although the Carboniferous-Rotliegend Total Petroleum System is one of the most intensely explored volumes of rock in the world, potential remains for undiscovered resources. Undiscovered conventional resources associated with the TPS range from 22 to 184 million barrels of oil, and from 3.6 to 14.9 trillion cubic feet of natural gas. Of these amounts, approximately 62 million barrels of oil and 13 trillion cubic feet of gas are expected in offshore areas, and 26 million barrels of oil and 1.9 trillion cubic feet of gas are predicted in onshore areas.

Bulletin↗

Assessment of Appalachian basin oil and gas resources: Carboniferous Coal-bed Gas Total Petroleum System

The Carboniferous Coal-bed Gas Total Petroleum System, which lies within the central and southern Appalachian basin, consists of the following five assessment units (AUs): (1) the Pocahontas Basin AU in southern West Virginia, eastern Kentucky, and southwestern Virginia; (2) the Central Appalachian Shelf AU in Tennessee, eastern Kentucky, and southern West Virginia; (3) the East Dunkard (Folded) AU in western Pennsylvania and northern West Virginia; (4) the West Dunkard (Unfolded) AU in Ohio and adjacent parts of Pennsylvania and West Virginia; and (5) the Appalachian Anthracite and Semi-Anthracite AU in Pennsylvania and Virginia. Only two of these assessment units were assessed quantitatively by the U.S. Geological Survey (USGS) in the National Oil and Gas Assessment in 2002. The USGS estimated the Pocahontas Basin AU and the East Dunkard (Folded) AU to contain a mean of about 3.6 and 4.8 trillion cubic feet (TCF) of undiscovered, technically recoverable gas, respectively. In general, the coal beds of the Carboniferous Coal-bed Gas Total Petroleum System (which are both the source rock and the reservoir) were deposited as peat together with their associated sedimentary strata in Mississippian and Pennsylvanian (Carboniferous) time. The generation of biogenic (microbial) gas probably began as soon as the peat deposits formed. Microbial gas generation is probably occurring at present to some degree throughout the Appalachian basin, wherever the coal beds are relatively shallow and wet. As a result of significant depth of burial, compaction, and coalification during the late Paleozoic and early Mesozoic, the coal beds were heated sufficiently to generate thermogenic gas (coalbed methane) in the eastern part of the Appalachian basin. Trap formation began with the deposition of the peat deposits during the Mississippian and continued into the Late Pennsylvanian and Permian, when strata of the Appalachian Plateaus were deformed during the Alleghanian orogeny. The seals are the connate waters that occupy fractures and larger pore spaces within the coal beds, as well as the fine-grained, siliciclastic sedimentary strata that are intercalated with the coal. The critical moment for the petroleum system occurred during the Alleghanian orogeny, when deformation resulted in the geologic structures in the eastern part of the Appalachian basin that enhanced fracture porosity within the coal beds. In places, burial by thrust sheets (thrust loading) in the Valley and Ridge physiographic province may have resulted in the additional generation of thermogenic coalbed methane in the Pennsylvania Anthracite region and in the semianthracite deposits of Virginia and West Virginia, although other explanations have been offered.

Appalachian basin↗

Summary report on the regional geology, environmental considerations for development, petroleum potential, and estimates of undiscovered recoverable oil and gas resources of the United States southeastern Atlantic continental margin in the area of proposed oil and gas lease sale No. 78

This report summarizes our general knowledge of the geology and petroleum potential, as well as potential problems and hazards associated with development of petroleum resources, of the area proposed for nominations for lease sale number 78. This area includes the U.S. eastern continental margin from the mouth of Chesapeake Bay to approximately Cape Canaveral, Florida, including the upper Continental Slope and inner Blake Plateau. The area for possible sales and the previous areas leased are shown in figure 1; physiographic features of the region are shown in figure 2. Six exploration wells have been drilled within the proposed lease area (figs. 3 and 4) but no commercial discoveries have been made. All six wells were drilled on the Continental Shelf in the Southeast Georgia Embayment. No commercial production has been obtained onshore in the region. The areas already drilled have thin sedimentary sections, and the deeper rocks are dominantly continental facies. Petroleum formation may have been hindered by a lack of organic material and sufficient burial for thermal maturation. Analysis of drill and seismic profiling data presented here, however, indicates that a much thicker sedimentary rock section containing a much higher proportion of marine deposits exists seaward of the exploratory wells on the Continental Shelf. These geologic conditions imply that the offshore basins may be more favorable environments for generating petroleum.

Open-File Report↗

Geology and hydrogeology of the Caribbean Islands aquifer system of the Commonwealth of Puerto Rico and the U.S. Virgin Islands

Poorly lithified to unconsolidated carbonate and clastic sedimentary rocks of Tertiary (Oligocene to Pliocene) and Quaternary (Pleistocene to Holocene) age compose the South Coast aquifer and the North Coast limestone aquifer system of Puerto Rico; poorly lithified to unlithified carbonate rocks of late Tertiary (early Miocene to Pliocene) age make up the Kingshill aquifer of St. Croix, U.S. Virgin Islands. The South Coast aquifer, North Coast limestone aquifer system, and Kingshill aquifer are the most areally extensive and function as the major sources of ground water in the U.S. Caribbean Islands Regional Aquifer-System Analysis (CI-RASA) study area. In Puerto Rico's South Coast ground-water province, more than 1,000 meters of clastic and carbonate rocks of Oligocene to Pliocene age infill the South Coast Tertiary Basin. The pattern of lithofacies within this basin appears to have been controlled by changes in base level that were, at times, dominated by tectonic movement (uplift and subsidence), but were also influenced by eustasy. Deposition of the 70-kilometer long and 3- to 8-kilometer wide fan-delta plain that covers much of the South Coast ground-water province occurred largely in response to glacially-induced changes in sea level and climate during the Quaternary period. Tectonic movement played a much less important role during the Quaternary. The North Coast ground-water province of Puerto Rico is underlain by homoclinal coastal plain wedge of carbonate and siliciclastic rocks that infill the North Coast Tertiary Basin and thicken to more than 1,700 meters. A thin basal siliciclastic sequence of late Oligocene age is overlain by a thick section of mostly carbonate rocks of Oligocene to middle Miocene age. Globigerinid limestone of late Miocene to Pliocene age crops out and lies in the shallow subsurface areas of northwestern Puerto Rico. Oligocene to middle Miocene age rocks tentatively can be divided into five depositional sequences and associated systems tracts; these rocks record carbonate and minor siliciclastic deposition that occurred in response to changes in relative sea level. The Cibao Formation represents the most complex of these sequences and contains a varied facies of carbonate, mixed carbonate-siliciclastic, and siliciclastic rocks that reflect differential uplift, subsidence, and transgression of the sea. Uplift, graben formation, and gradual shallowing of the sea are reflected within the bathyal-dominated sedimentary facies of the Kingshill Limestone in St. Croix, U.S. Virgin Islands. Reef-tract limestone beds of Pliocene age were subject to exposure, resubmergence, and meteoric leaching of aragonitic skeletal debris; these beds contain patchy lenses of dolomite that are restricted to a small, structurally-controlled embayment. The South Coast aquifer, the principal water-bearing unit of Puerto Rico's South Coast ground-water province, consists of boulder- to silt-size detritus formed by large and small coalescing fan deltas of Pleistocene to Holocene age. Deep well data indicates that it is possible to vertically separate and group a highly complex and irregular-bedded detrital sequence that underlies distal parts of the fan-delta plain into discrete water-bearing units if correlated with 30- to 40-meter thick, eustatically-controlled depositional cycles. Lithofacies maps show that greatest hydraulic conductivity within the fan-delta plain is generally associated with proximal fan and midfan areas. Distal and interfan areas are least permeable. Alluvial valley aquifers located in the western part of the South Coast ground-water province are important local sources of water supply and appear to contain some of the same physical and hydraulic characteristics as the South Coast aquifer. Older sedimentary rocks within the basin are poor aquifers; conglomeratic beds are well-cemented, and carbonate beds do not contain well-developed solution features, except locally where the beds are overlain by alluvium. Ground-water occurs under unconfined conditions in proximal and midfan areas. Confined conditions within deeper parts of the system and in interfan and some midfan areas are created largely by the intercalated nature of discontinuous fine-grained beds that retard vertical ground-water movement. The development of water resources in southern Puerto Rico has modified the hydrologic system of the South Coast aquifer considerably. Under predevelopment conditions, the South Coast aquifer was recharged in the unconfined, proximal fan and some midfan areas by infrequent rainfall and seepage from streams near the fan apex. Discharge occurred as seabed seepage, baseflow discharge along the lower coastal reach of streams, seepage to coastal wetlands, or evapotranspiration in areas underlain by a shallow water table. Under development conditions, seepage from irrigation canals and areal recharge from furrow irrigation represented a principal mechanism for recharge to the aquifer. Increased ground-water withdrawals in the 1960's and 1970's resulted in declines in the water table to below sea level in some places and intrusion of salt water into the aquifer. By the middle 1980's, a reduction in ground-water withdrawals and a shift from furrow irrigation to drip-irrigation techniques resulted in the recovery of water levels. Under present-day (1986) conditions, regional ground-water flow is coastward but with local movement to some well fields. In addition to the discharge mechanisms described above, ground-water discharges also to coastal canals. The North Coast limestone aquifer system consists of limestone, lesser amounts of dolomite, and minor clastic detritus of Oligocene to Pliocene age that form an unconfined upper aquifer and a confined lower aquifer; these aquifers are separated by a clay, mudstone, and marl confining unit. Topographic relief and incision of carbonate coastal plain rocks by streams are the principal factors controlling the direction of ground-water flow. The North Coast limestone aquifer system is recharged principally by precipitation that enters the upper and lower aquifers where they crop out. Regional groundwater movement from the upper aquifer is to the major rivers, wells, coastal wetlands, coastal, nearshore, and offshore springs, or as seabed seepage. Regional discharge from the lower aquifer is to the major rivers along its unconfined parts or where the confining unit has been breached by streams. Discharge from the lower aquifer also occurs in the San Juan area where the Mucarabones Sand provides an avenue for diffuse upward ground-water flow. Transmissivity within the upper limestone aquifer appears to be largely regulated by the thickness of the freshwater lens. The lens is thickest and transmissivity is greatest in interstream areas that lie in a zone that closely corresponds to the landwardmost extent of the underlying saltwater wedge. Hydraulic conductivity of the upper aquifer generally increases in a coastward direction and reflects lithologic control, karstification in the upper 30 to 100 meters of the section, and enhanced permeability in a zone of freshwater and saltwater mixing. Transmissivity of the lower aquifer is an order of magnitude smaller than that of the upper aquifer; highest transmissivities in the lower aquifer largely correspond to a coarse grainstone-packstone and coral-patch-reef depositional facies contained within the outcropping parts of the Montebello Limestone Member and its subsurface equivalents. Porosity within the North Coast limestone aquifer system is high in grainstone-packstones and low in wackestone and marl. Dolomitized zones and moldic grainstone-packstone strata are the most porous carbonate rocks, but occur in thin beds that usually are only a few meters thick. Processes of karstification that include the development of caverous zones and large vugs, and dissolution along possible regional fracture sets has enhanced permeability within the upper part of the aquifer system. Stratigraphic and lithologic control play an important role controlling permeability within the lower part of the system. The Kingshill aquifer of St. Croix, in large part, is composed of deepwater limestone that contains only microscopic pores and is poorly permeable; however, the upper part of the aquifer, a shallow-water skeletal and reef limestone, is fairly permeable, but restricted in areal extent. Permeability within these uppermost beds of the aquifer has been enhanced by meteoric leaching, dissolution within a mixing zone of saltwater and fresh water, and dolomitization. However, most large-yield wells completed in the Kingshill aquifer are also screened in alluvium that overlies or infills incised channels. The alluvial deposits serve as a temporary storage zone for rainfall, runoff, and ground water slowly entering the Kingshill aquifer.

Puerto Rico↗

Geologic Map of the Gold Creek Gold District, Elko County, Nevada

The Gold Creek, Nev. area displays important stratigraphic and structural relationships between Paleozoic and early Tertiary sedimentary strata in an area dominated by large intrusive bodies of Mesozoic age and extensive volcanic fields of middle to late Tertiary age. An autochthonous sequence includes the Cambrian and Proterozoic(?) Prospect Mountain Quartzite and the overlying Cambrian and Ordovician Tennessee Mountain Formation. This autochthon is overlain by three allochthonous plates each composed of a distinctive sequence of strata and having a distinctive internal structure. The structurally lowest plate is composed of the Havallah sequence, locally of Mississippian and Pennsylvanian age, which is folded on north-south trending axes. The next higher plate is composed of somewhat younger Pennsylvanian and Permian strata cut by east-west trending low-angle faults. The highest plate is composed of early Tertiary non-marine sedimentary and igneous rocks folded on varied but mainly north-south trending axes. The question of whether the allochthonous plates were emplaced by contractional or extensional forces is indeterminate from the local evidence. Mineral deposits include gold placers of moderate size and small pockets of base metals, none of which is currently being exploited.

Scientific Investigations Map↗

Geology and ground water resources of Grand Forks County

Grand Forks County in northeastern North Dakota is underlain by glacial drift, westward-dipping Paleozoic and Mesozoic sedimentary rocks and Precambrian igneous and metamorphic rocks. Glacial drift that covers the bedrock reaches a maximum thickness of 455 feet. It can be differentiated into 5 drift sheets, each of which in turn can be separated into till units, lake clay and silt units, and sand and gravel units. Relief on the bedrock surface is much greater than that on the present glacial topography. In western Grand Forks County, the bedrock rises 600 feet from east to west at the Pembina escarpment, whereas the surface elevations rise only 300 feet.

North Dakota↗

Geologic map of the Silver Zone Pass quadrangle, Elko County, Nevada

This 1:24,000-scale geologic map of the Silver Zone Pass quadrangle lies in the southern Toano Range in Elko County, Nevada. Metamorphic and sedimentary strata of the quadrangle range from Neoproterozoic to Permian in age. Important intrusions include the Late Jurassic (ca. 159 Ma) Silver Zone Pass pluton and Cretaceous Toano Spring pluton. In particular, the Silver Zone Pass pluton involves undeformed dikes that crosscut metamorphic foliations and the pluton is associated with pluton-margin anticlines. Interpretation of these characteristics suggests that the pluton was syn-kinematic with respect to metamorphism and strain, thus requiring a phase of Late Jurassic deformation. A Miocene rhyolite lava is of particular interest as one of the few topaz-bearing volcanic rocks in Nevada. A major detachment fault places non-metamorphosed Paleozoic rocks over low-grade Paleozoic and Proterozoic rocks. High-angle normal faults tilted the range in several blocks, and Miocene Humboldt Formation were deposited on, and faulted against, bedrock. Rocks of the Toano Range are bounded by broad valleys on the east and west, with the eastern basin being at much lower elevation than the western basin. Pleistocene lakes, which created distinctive beach deposits, occupied both basins, with Lake Bonneville on the east and Lake Waring on the west. Silver Zone Pass owes its low relief to the enhanced weathering and erosion of the rock within the pass, a granodiorite pluton. The weathering has created some unusual landforms such as tors.

Nevada↗