Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS1987

Surface current patterns suggested by suspended sediment distribution over the outer continental margin, Bering Sea

Samples of total suspended matter (TSM) were collected at the surface over the northern outer continental margin of the Bering Sea during the summers of 1980 and 1981. Volume concentrations of surface TSM averaged 0.6 and 1.1 mg l −1 for 1980 and 1981, respectively. Organic matter, largely plankton, made up about 65% of the near-surface TSM for both years. Distributions of TSM suggested that shelf circulation patterns were characterized either by meso- and large- scale eddies or by cross-shelf components of flow superimposed on a general northwesterly net drift. These patterns may be caused by large submarine canyons which dominate the physiography of this part of the Bering Sea continental margin.

Marine Geology↗
USGS2009

Recent faulting in the Gulf of Santa Catalina: San Diego to Dana Point

We interpret seismic-reflection profiles to determine the location and offset mode of Quaternary offshore faults beneath the Gulf of Santa Catalina in the inner California Continental Borderland. These faults are primarily northwest-trending, right-lateral, strike-slip faults, and are in the offshore Rose Canyon-Newport-Inglewood, Coronado Bank, Palos Verdes, and San Diego Trough fault zones. In addition we describe a suite of faults imaged at the base of the continental slope between Dana Point and Del Mar, California. Our new interpretations are based on high-resolution, multichannel seismic (MCS), as well as very high resolution Huntec and GeoPulse seismic-reflection profiles collected by the U.S. Geological Survey from 1998 to 2000 and MCS data collected by WesternGeco in 1975 and 1981, which have recently been made publicly available. Between La Jolla and Newport Beach, California, the Rose Canyon and Newport-Inglewood fault zones are multistranded and generally underlie the shelf break. The Rose Canyon fault zone has a more northerly strike; a left bend in the fault zone is required to connect with the Newport-Inglewood fault zone. A prominent active anticline at mid-slope depths (300-400 m) is imaged seaward of where the Rose Canyon fault zone merges with the Newport-Inglewood fault zone. The Coronado Bank fault zone is a steeply dipping, northwest-trending zone consisting of multiple strands that are imaged from south of the U.S.-Mexico border to offshore of San Mateo Point. South of the La Jolla fan valley, the Coronado Bank fault zone is primarily transtensional; this section of the fault zone ends at the La Jolla fan valley in a series of horsetail splays. The northern section of the Coronado Bank fault zone is less well developed. North of the La Jolla fan valley, the Coronado Bank fault zone forms a positive flower structure that can be mapped at least as far north as Oceanside, a distance of ??35 km. However, north of Oceanside, the Coronado Bank fault zone is more discontinuous and in places has no strong physiographic expression. The San Diego Trough fault zone consists of one or two well-defined linear fault strands that cut through the center of the San Diego Trough and strike N30??W. North of the La Jolla fan valley, this fault zone steps to the west and is composed of up to four fault strands. At the base of the continental slope, faults that show recency of movement include the San Onofre fault and reverse, oblique-slip faulting associated with the San Mateo and Carlsbad faults. In addition, the low-angle Oceanside detachment fault is imaged beneath much of the continental slope, although reflectors associated with the detachment are more prominent in the area directly offshore of San Mateo Point. North of San Mateo Point, the Oceanside fault is imaged as a northeast-dipping detachment surface with prominent folds deforming hanging-wall strata. South of San Mateo point, reflectors associated with the Oceanside detachment are often discontinuous with variable dip as imaged in WesternGeco MCS data. Recent motion along the Oceanside detachment as a reactivated thrust fault appears to be limited primarily to the area between Dana and San Mateo Points. Farther south, offshore of Carlsbad, an additional area of folding associated with the Carlsbad fault also is imaged near the base of the slope. These folds coincide with the intersection of a narrow subsurface ridge that trends at a high angle to and intersects the base of the continental slope. The complex pattern of faulting observed along the base of the continental slope associated with the San Mateo, San Onofre, and Carlsbad fault zones may be the result of block rotation. We propose that the clockwise rotation of a small crustal block between the Newport-Inglewood-Rose Canyon and Coronado Bank fault zones accounts for the localized enhanced folding along the Gulf of Santa Catalina margin. Prominent subsurface basement ridges imaged offshore of Dana Point m

Special Paper of the Geological Society of America↗
USGS1987

Cenozoic stratigraphy and geologic history of the Tucson Basin, Pima County, Arizona

This report was prepared as part of a geohydrologic study of the Tucson basin conducted by the U.S. Geological Survey in cooperation with the city of Tucson. Geologic data from more than 500 water supply and test wells were analyzed to define characteristics of the basin sediments that may affect the potential for land subsidence induced by groundwater withdrawal. The Tucson basin is a structural depression within the Basin and Range physiographic province. The basin is 1,000 sq mi in units area and trends north to northwest. Three Cenozoic stratigraphic unit--the Pantano Formation of Oligocene age, the Tinaja beds (informal usage) of Miocene and Pliocene age, and the Fort Lowell Formation of Pleistocene age--fill the basin. The Tinaja beds include lower, middle, and upper unconformable units. A thin veneer of stream alluvium of late Quaternary age overlies the Fort Lowell Formation. The Pantano Formation and the lower Tinaja beds accumulated during a time of widespread continental sedimentation, volcanism, plutonism, uplift, and complex faulting and tilting of rock units that began during the Oligocene and continued until the middle Miocene. Overlying sediments of the middle and upper Tinaja beds were deposited in response to two subsequent episodes of post-12-million-year block faulting, the latter of which was accompanied by renewed uplift. The Fort Lowell Formation accumulated during the Quaternary development of modern through-flowing the maturation of the drainage. The composite Cenozoic stratigraphic section of the Tucson basin is at least 20,000 ft thick. The steeply tilted to flat-lying section is composed of indurated to unconsolidated clastic sediments, evaporites, and volcanic rocks that are lithologically and structurally complex. The lithology and structures of the section was greatly affected by the uplift and exhumation of adjacent metamorphic core-complex rocks. Similar Cenozoic geologic relations have been identified in other parts of southern Arizona. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1977

Subsurface geology of a potential waste emplacement site, Salt Valley Anticline, Grand County, Utah

The Salt Valley anticline, which is located about 32 km northeast of Moab, Utah, is perhaps one of the most favorable waste emplacement sites in the Paradox basin. The site, which includes about 7.8 km 2, is highly accessible and is adjacent to a railroad. The anticline is one of a series of northwest-trending salt anticlines lying along the northeast edge of the Paradox basin. These anticlines are cored by evaporites of the Paradox Member of the Hermosa Formation of Middle Pennsylvanian age. The central core of the Salt Valley anticline forms a ridgelike mass of evaporites that has an estimated amplitude of 3,600 m. The evaporite core consists of about 87 percent halite rock, which includes some potash deposits; the remainder is black shale, silty dolomite, and anhydrite. The latter three lithologies are referred to as 'marker beds.' Using geophysical logs from drill holes on the anticline, it is possible to demonstrate that the marker beds are complexly folded and faulted. Available data concerning the geothermal gradient and heatflow at the site indicate that heat from emplaced wastes should be rapidly dissipated. Potentially exploitable resources of potash and petroleum are present at Salt Valley. Development of these resources may conflict with use of the site for waste emplacement.

Open-File Report↗
USGS2015

Introduction to special section: China shale gas and shale oil plays

In the last 10 years, the success of shale gas and shale oil productions as a result of technological advances in horizontal drilling, hydraulic fracturing and nanoscale reservoir characterization have revolutionized the energy landscape in the United States. Resource assessment by the China Ministry of Land and Resources in 2010 and 2012 and by the U.S. Energy Information Administration in 2011 and 2013 indicates China’s shale gas resource is the largest in the world and shale oil resource in China is also potentially significant. Inspired by the success in the United States, China looks forward to replicating the U.S. experience to produce shale gas to power its economy and reduce greenhouse gas emissions. By 2014, China had drilled 400 wells targeting marine, lacustrine, and coastal swamp transitional shales spanning in age from the Precambrian to Cenozoic in the last five years. So far, China is the leading country outside of North America in the viable production of shale gas, with very promising prospects for shale gas and shale oil development, from the Lower Silurian Longmaxi marine shale in Fuling in the southeastern Sichuan Basin. Geological investigations by government and academic institutions as well as exploration and production activities from industry indicate that the tectonic framework, depositional settings, and geomechanical properties of most of the Chinese shales are more complex than many of the producing marine shales in the United States. These differences limit the applicability of geologic analogues from North America for use in Chinese shale oil and gas resource assessments, exploration strategies, reservoir characterization, and determination of optimal hydraulic fracturing techniques. Understanding the unique features of the geology, shale oil and gas resource potential, and reservoir characteristics is crucial for sweet spot identification, hydraulic fracturing optimization, and reservoir performance prediction. Even though China shale gas and shale oil exploration is still in an early stage, limited data are already available. We are pleased to have selected eight high-quality papers from fifteen submitted manuscripts for this timely section on the topic of China shale gas and shale oil plays. These selected papers discuss various subject areas including regional geology, resource potentials, integrated and multidisciplinary characterization of China shale reservoirs (geology, geophysics, geochemistry, and petrophysics) China shale property measurement using new techniques, case studies for marine, lacustrine, and transitional shale deposits in China, and hydraulic fracturing. One paper summarizes the regional geology and different tectonic and depositional settings of the major prospective shale oil and gas plays in China. Four papers concentrate on the geology, geochemistry, reservoir characterization, lithologic heterogeneity, and sweet spot identification in the Silurian Longmaxi marine shale in the Sichuan Basin in southwest China, which is currently the primary focus of shale gas exploration in China. One paper discusses the Ordovician Salgan Shale in the Tarim Basin in northwest China, and two papers focus on the reservoir characterization and hydraulic fracturing of Triassic lacustrine shale in the Ordos Basin in northern China. Each paper discusses a specific area.

Interpretation↗
USGS1976

Geological and geochemical reconnaissance in the central Santander Massif, Departments of Santander and Norte de Santander, Colombia

The central Santander Massif is composed of Precambrian Bucaramanga Gneiss and pre-Devonian Silgara Formation intruded by Mesozoic quartz diorite, quartz monzonite, and alaskite and Cretaceous or younger porphyry. Triassic (Bocas Formation), Jurassic (Jordan and Giron Formations).and Cretaceous (Tambor, Rosa Blanca, Paja, Tablazo, Simiti, La Luna, and Umir Formations) sedimentary rocks overlie the metamorphic rocks and are younger than most of the intrusions. A geological and geochemical reconnaissance of part of the central Santander Massif included the Vetas and California gold districts. At Vetas the gold is generally in brecciated aphanitic quartz and phyllonite. Dark-gray material in the ore may be graphite. The ore veins follow steep west-northwest- and north-northeast-striking fracture zones. No new gold deposits were found. Additional geochemical studies should concentrate on western Loma Pozo del Rey and on improvement of the gold extraction process. At California the gold is in pyritiferous quartz veins and quartz breccia. Ore containing black sooty material (graphite?) is highly radioactive. Some of the mineralization is post-Lower Cretaceous. Soil samples indicate that gold deposits lie under the thick blanket of soil on the ridges above the zone of mining. Three principal gold targets are outlined by gold and associated minerals in pan concentrates. The close relation of gold and copper anomalies suggests that copper may be useful as a pathfinder for gold elsewhere in the region. Based on occurrences of gold or high concentrations of pyrite or chalcopyrite in pan concentrates and on analytical data, eight potential gold targets are outlined in the central massif. Reconnaissance of the surrounding region is warranted.

Open-File Report↗
USGS1967

Swatara Creek basin of southeastern Pennsylvania: An evaluation of its hydrologic system

Local concentrations of population in the Swatara Creek basin of Pennsylvania find it necessary to store, transport, and treat water because local supplies are either deficient or have been contaminated by disposal of wastes in upstream areas. Water in the basin is available for the deficient areas and for dilution of the coal-mine drainage in the northern parts and the sewage wastes in the southern parts. Swatara Creek drains 576 square miles just east of Harrisburg, Pa., and is the largest tributary to the Susquehanna River from the north side below Harrisburg. It rises in the southern Pocono Mountains and flows southwestward across the Lebanon Plateau. On an average day Swatara Creek discharges more than 630 million gallons into the Susquehanna River at Middletown, Pa. In a year this amounts to about 23 inches of water over the entire basin and is the residual from an average annual precipitation of 45.5 inches. During an average year the flow in Swatara Creek from the upper third of the basin above Harper Tavern is always greater than 1,300 mgd (million gallons per day) for at least 15 days and is always greater than 25 mgd for at least 350 days. The daily streamflow from the basin averages 1.1 mgd per sq mi, but yields from different areas range from 0.97 to 1.22 mgd per sq mi. These variations are caused chiefly by differences in precipitation and land cover. The area of lowest yield is in the valleys west of Tremont, and the highest yields are in the Upper and Lower Little Swatara Creek subbasins. At high and medium stages the chemical character of the water in the streams is suitable for public and private supplies. At lower stages, defending on the areas and the amounts of contamination by coal-mine drainage and sewage pollution, the natural flow may require some treatment. At low stages the chemical characteristics of the natural flow not affected by man is almost identical with that of the ground water in the area drained by the stream. In general, the total dissolved solids range from about 25 to 400 parts per million and the hardness is as much as about 300 parts per million. The ground-water increment to the base flow of Swatara Creek averages about 240 mgd, or about 8.8 inches annually, for the basin. Generally, ground-water supplies in amounts of less than 0.5 mgd can be developed south of Blue Mountain. Supplies of several million gallons per day have been developed for industrial use from the permeable limestones in the south-central part of the basin. More intensive investigation in other parts of the basin would indicate areas where supplies of more than 0.5 mgd could be developed from properly spaced wells. The chemical character of water from wells depends largely on the host rock. In highly soluble rocks water contains large amount of dissolved solids; in more resistant rocks concentrations are lower. The chemical character of unpolluted ground water generally reflects the composition of the more readily soluble minerals in the local geologic environment. Areas contaminated by septic- tank effluent may have above normal amounts of nitrate and detergent products. Except where polluted, most ground water is suitable for public and industrial uses without extensive treatment. Sites for storage of surface water exist in the part of the basin lying in the valley and ridge area. As much as 30 to 40 percent of the annual flow could be impounded for release as low-flow augmentation for dilution of mine drainage and other wastes in the basin. Low sediment yields of supplying drainage areas would ensure a long life expectancy of reservoirs at these sites. Overbank flooding of the main stem of the Swatara Creek and its tributaries has occurred many times in the past. However, it has not been a hazard because urban development has not encroached on the flood plain. An inundation map of the August 1933 flood provides a basis that urban planners may use to avoid future damage. As water in the Swatara Creek moves downstream to the Susquehanna River, the flow is influenced consecutively by a large annual rainfall on the northern valley and ridge area, the wastes of surface and subsurface coal-mining activities, and less annual rainfall on the part of the basin lying in the Lebanon Plateau area; the flow is supplemented and further influenced by many tributaries and by the industrial and domestic wastes that are carried by these secondary streams. The annual precipitation ranges from 52 inches at the east edge and 49 inches at the west edge of the mountainous part of the basin to about 41 inches at the southwestern part at Middletown. The rainfall generally is adequate during the growing season to mature the crops. The mean annual temperature at Lebanon is about 52°F, and the growing season is about 180 days. In this report the basin has been divided into eight hydrologic zones, leased on runoff, natural use of water, and chemical character of water. Four zones lie in the valley and ridge area, three lie in the Lebanon Plateau area, and one lies in the highland along the southeastern basin boundary. In each of the zones the hydrologic characteristics are virtually the same, but they may be completely different from those in adjacent zones. The boundaries of the zones generally coincide with boundaries between geologic formations, and the areas in each zone include rocks of similar influence on water. Streams in zone 4 at the northeast edge of the plateau have the highest average surface runoff from 1.2 to 1.1 mgd per sq mi whereas those in zone 2 at the northwest edge of the valley and ridge area have the lowest, about 1.0 mgd. Streams in zone 8, along the southeast edge of the basin, have the largest sustained low-flow yield, about 0.26 to 0.19 mgd per sq mi; those in zone 5 overlying the Martinsburg Shale east of Harrisburg have the smallest sustained low-flow yields, 0.03 to 0.01 mgd. Streams in the limestone area of zone 7 have the greatest range in low-flow yields in any one zone from 0.60 to 0 mgd per sq mi. Low-flow yields in zones 1 through 4 range from 0.13 to 0.03 mgd per sq mi. Surface flows from zones 1 and 2 are generally acidic and contain high concentrations of sulfate, iron, and total dissolved solids especially where contaminated with mine wastes. Surface flows from zones 3 and 4 are dilute, slightly alkaline, and suitable for public water supplies. Surface flows from zones 5, 6, and 7 are alkaline and contain moderate concentrations of dissolved solids with waters of highest hardness occurring in zone 7. Surface flows from zone 8 are dilute to moderately mineralized and are relatively high in silica concentration. Nitrate concentrations are high in surf Fee flows below sewage outfalls and in ground water contaminated by septic tank effluent and industrial wastes. Average annual sediment yields of 550 to 650 tons per square mile are characteristic of zones 1 and 2 where strip mining has destroyed the forest cover and coal culm is carried into the streams. From agricultural lands on the Martinsburg Shale in zones 5 and 6, annual sediment yields range from 300 to 350 tons per square mile; but from agricultural lands on the siliceous rocks in zone 8 and zones 3 and 4 in the valley and ridge area, the sediment yield ranges from 200 to 250 tons annually per square mile. Lowest annual sediment yields in the basin are in the forested areas of siliceous rocks in zones 2, 3, 4, and 5, and in the sinkhole topography of the limestones in zone 7 where the yield ranges from 30 to 35 tons and 50 to 60 tons per square mile, respectively. The amount of ground water that can be developed in the basin is dependent on the ability of the underlying rocks to yield water to wells. More than 300 gpm (gallons per minute) can be obtained from wells in alluvial materials in the valley bottoms and in some of the limestones where large solution channels and fractures are penetrated by the wells. From 50 to 300 gpm can be obtained from wells in loosely cemented sandstones and in fractured limestones. From 10 to 50 gpm can be developed from wells in the shales and harder sandstones. The most dense rocks will yield from 1 to 10 gpm from fractures and crevices. Most wells yield water from the upper 350 feet of the formation, for this part contains the most fractures or solution channels. Studies show that the velocity at which a contaminant will move downstream in the basin is related to the discharge of the stream at the time. At a stream discharge of about 400 mgd at Pine Grove, a contaminant in Swatara Creek would require about 40 hours to move from Pine Grove to Middletown. As a result of dispersion and dilution, the maximum concentration of the contaminant at Middletown would be less than 20 percent the concentration at Pine Grove under these conditions. An evaluation of the availability of water in the basin indicates that about I,239 mgd enters as precipitation, 630 mgd leaves as streamflow, 580 mgd is evaporated and transpired, and 56 mgd is diverted for use by man. Not all the diversions for man's use are lost to the basin, as about 27 mgd is returned as sewage for reuse. About one-fourth of the waste water is returned to the ground and the remainder to stream drainageways. Of that diverted by man, 11.6 mgd is used for public supply and 44.4 mgd for industrial and private supplies. Diversions of streamflow furnish 86 percent of the public supply and 27 percent of the industrial supply, and ground-water sources yield the remainder. Municipal and private sewage treatment plants are upgrading the waste water in many places, but no provisions are being made for treatment other than natural dilution and assimilation for the 15 mgd of coal-nine drainage in the northern part of the basin. Technology for economic treatment of mine water is not available at this time, although research in this field is being done. Urbanization eastward from Harrisburg and around Lebanon has increased the population density of the basin. Densities of 500 people per square mile and water use exceeding 2.0 mgd per sq mi can be expected in the future. By the year 2000 the population of the basin may increase 60 percent; and if the per capita rate of use increases 0.5 percent per year the domestic requirements for water will be about two times the present use, or 23 mgd. Similarly, if the present 1:4 ratio of domestic use to industrial use of water continues, at least 89 mgd will be needed for industry in the future. Although an increase to twice the present use of water can be foreseen, or 112 mgd, water for the dilution and assimilation of wastes from treatment systems are not included. Providing water for dilution of wastes from treatment plants has not been a problem, but in the future the amounts needed for this purpose will be greater as the population increases. As water becomes more valuable, treatment of sewage wastes to reduce the biochemical-oxygen-demand load by at least 80 to 90 percent will be necessary to conserve water for more productive uses. As much as 100 mgd may be needed for waste dilution in the basin by year 2000. The present trends in suburban and light industrial development will probably persist in the basin. Problems arising through changes in economic value of water, conflicts in use, and alternatives in development are typical of those confronting the manager of a water-resource system.

Pennsylvania↗
USGS2002

A Geothermal GIS for Nevada: Defining Regional Controls and Favorable Exploration Terrains for Extensional Geothermal Systems

Spatial analysis with a GIS was used to evaluate geothermal systems in Nevada using digital maps of geology, heat flow, young faults, young volcanism, depth to groundwater, groundwater geochemistry, earthquakes, and gravity. High-temperature (>160??C) extensional geothermal systems are preferentially associated with northeast-striking late Pleistocene and younger faults, caused by crustal extension, which in most of Nevada is currently oriented northwesterly (as measured by GPS). The distribution of sparse young (<1.5Ma) basaltic vents also correlate with geothermal systems, possibly because the vents help identify which young structures penetrate deeply into the crust. As expected, elevated concentrations of boron and lithium in groundwater were found to be favorable indicators of geothermal activity. Known high-temperature (>160??C) geothermal systems in Nevada are more likely to occur in areas where the groundwater table is shallow (<30m). Undiscovered geothermal systems may occur where groundwater levels are deeper and hot springs do not issue at the surface. A logistic regression exploration model was developed for geothermal systems, using young faults, young volcanics, positive gravity anomalies, and earthquakes to predict areas where deeper groundwater tables are most likely to conceal geothermal systems.

Conference Paper↗
USGS2020

Reconnaissance map of the Cenozoic geology in the Carlin basin area, Elko and Eureka counties, Nevada

The middle Miocene Carlin sedimentary basin encompasses a large area between the Adobe Range to the east, the Piñon Range to the south, the southern Independence Mountains and Marys Mountain to the west, and Swales Mountain to the north. The town of Carlin is in the southern part of the basin. The geologic map includes detailed to more reconnaissance mapping of Cenozoic units in the main part of the basin, including different facies of the middle Miocene Humboldt Formation. The mapping was part of a broader study of the Miocene and younger paleogeographic evolution of the region. Earlier work obtained numerous 40 Ar/ 39 Ar and tephra correlation dates on sedimentary and volcanic units in the basin. The basin connected to the east into the Elko sedimentary basin and to the northwest and northeast into similar smaller basins between present-day mountain ranges. Early sediments, largely fluvial, began to accumulate in the lowlands between the surrounding ranges at about 16.5 Ma. The sediments were derived from Paleozoic sedimentary and middle Tertiary volcanic units in the nearby highlands, and flow patterns indicate a general southward flow towards present-day Pine Valley. The eruption of the Palisade Canyon–Marys Mountain rhyolite flows at the southwest end of the basin at 15.3 Ma blocked the southward flow, and a lake began to form in the basin. As the lake grew in extent, sedimentary units around the fringes of the lake included a mixture of inflowing fluvial sediments mixed with the pyroclastic-fall, ash-rich sediments deposited in the lake. The lake margin expanded, and stratigraphic sections record the progressive transition from fluvial to mixed fluvial and lacustrine, and finally to entirely lacustrine. The volcanic rock dam was breached at about 14.7 Ma, the lake drained, and fluvial sediments blanketed the entire basin for an unknown period of time after that. Sedimentation progressively buried existing highlands and bridged gaps between adjacent basins. For example, the Carlin and Elko basins connected across the southern Adobe Range. Normal faulting produced numerous, mostly north- to north-northeast-striking faults that cut the sedimentary units and surrounding highlands largely after sedimentation ceased. The largest fault formed in the eastern third of the basin and tilted all of the sedimentary units in the western two-thirds of the basin, as well as the eastern part of Marys Mountain, to the east. Some offset took place during sedimentation. Many other normal faults of smaller extent and offset cut the sedimentary units. The integration of streams draining the Elko and Carlin basins began after about 9.8 Ma. The streams, which together comprised the early stages of the Humboldt River, flowed regionally southwestward beyond the Carlin basin. As many as thirteen, downward-stepping strath terraces in the Carlin basin record the progressive downcutting into and removal of the middle Miocene sediments. Gravel deposits form a thin veneer on some of the higher terraces. Clasts in those gravel deposits, as well as the overall terrace pattern, indicate southward drainage towards the Humboldt River. The erosion gradually re-exposed the flanks of the surrounding highlands. A brief pause in downcutting allowed the formation of a small lake in the Hemphillian (late Miocene), represented by lacustrine units northwest of Carlin. The sedimentary rocks of the Carlin basin conceal a large segment of the world-class, late Eocene Carlin gold trend, which extends from the southern Independence Mountains south into the Piñon Range. Sedimentation largely buried the Gold Quarry and Mike gold deposits in the northwestern part of the basin. Later faulting and erosion re-exposed the Gold Quarry deposit, but the Mike deposit remains buried. The basin’s sedimentary units conceal potential Paleozoic host rocks, and the sedimentary facies and post-sedimentation faults shown on the map may help guide interpretations of geophysical and other exploration data in the Carlin basin. The current map publication was supported by the USGS National Cooperative Geologic Mapping Program under STATEMAP award number G19AC00383.

Nevada↗
USGS1985

Regional setting and new information on some critical geologic features of the West Shasta district, California

The West Shasta massive sulfide district is in the easternmost of a series of accreted island-arc and oceanic crust terranes that comprise the Klamath Mountains. A sequence of submarine volcanic rocks of predominantly Early Devonian age is the principal component of the island-arc terrane in which the sulfide deposits are hosted. The Copley Greenstone, consisting mainly of andesitic and basaltic pillow lavas and breccias totaling at least 1,800 m in thickness, is the oldest rock unit in the sequence. It is overlain and also intruded by dikes of the Balaklala Rhyolite. Northeast of the West Shasta district, greenstone also overlies the Balaklala Rhyolite, suggesting that a major greenstone unit may overlie potentially mineralized rhyolite east of the district. However, recent studies have shown that the complex relations in that area can be explained by folding.The Balaklala sequence consists of silicic flows, breccias, and tuffs having a maximum thickness somewhat in excess of 1,000 m. The Balaklala has been divided by Kinkel et al. (1956) into three units: a lower nonporphyritic to slightly porphyritic unit containing large amounts of breccia and tuff; a middle unit characterized by rhyolite containing quartz phenocrysts 1 to 4 mm in diameter but also containing a complex assortment of tuff, breccia, and pyritic massive sulfide bodies in its upper part; and an upper unit typically containing dark quartz phenocrysts in excess of 4 mm in diameter. Much of the lower part of the upper unit is pyroclastic material, whereas most of the upper part of the unit appears to be a massive volcanic-flow rock. At least half a dozen eruptive centers for the Balaklala Rhyolite are identified, three of them within an area measuring 17 X 3 km that constitutes the limits of the former mining district.The youngest unit in the arc sequence is the Kennett Formation consisting of black shale and chert containing radiolarians, which indicate fairly deep-water deposition in its lower part, and limestone containing a shallow water fauna of probable Middle Devonian age in the upper part. A 400-m.y.-old trondhjemite stock, named the Mule Mountain stock, intrudes the Copley Greenstone and Balaklala Rhyolite and is considered to be essentially coeval with these volcanic units.The pyritic massive sulfide deposits occur in clusters of individual bodies owing in large part to disruption by postmineral faults. The deposits are stratigraphically confined to the upper part of the subhorizontal middle unit of the Balaklala, and their horizontal distribution is here interpreted to have been controlled by an extensional tectonic regime that prevailed during Early Devonian time. The major geologic evidence for such a regime is the marked preferred elongations exhibited by the distribution of the afore-mentioned eruptive centers, the eight or nine massive sulfide clusters in the district, and the geometrically similar distribution of the clusters in relation to each other. The preferred directions of elongation in both the detailed and broader senses may be generalized to N 20 degrees to 25 degrees E, N 37 degrees E, N 60 degrees to 80 degrees E, and N 40 degrees to 60 degrees W. The three northeast trends dominate throughout the district, whereas the northwest trend is evident mainly in the northern part and is more speculative. The major deposit clusters fall at intersections of the major trends, some of which may have been grabens. Trend intersections having no known deposits may be good exploration targets in localities where the stratigraphically favorable middle unit of the Balaklala is still present.

Economic Geology↗
USGS1965

Geology of the Cedar Mesa-Boundary Butte area, San Juan County, Utah

The Cedar Mesa-Boundary Butte area lies within the Colorado Plateau and includes about 650 square miles in southern San Juan County, Utah. Altitudes ranges from 3,890 feet on the westward-flowing San Juan River, the major and only perennial stream, to more than 6,400 feet on Cedar Mesa in the northwest. Bare rocks, high mesas, sheer cliffs, and deep canyons characterize the area. Comb Ridge, a prominent hogback of eastward-dipping rocks, trends north through the middle part of the area and is the most conspicuous topographic feature. The only permanent settlements are Bluff in the east and Mexican Hat in the west, both on the San Juan River.

Utah↗
USGS1993

Geologic map of the Skykomish River 30- by 60-minute quadrangle, Washington

From the eastern-most edges of suburban Seattle, the Skykomish River quadrangle stretches east across the low rolling hills and broad river valleys of the Puget Lowland, across the forested foothills of the North Cascades, and across high meadowlands to the bare rock peaks of the Cascade crest. The Straight Creek Fault, a major Pacific Northwest structure which almost bisects the quadrangle, mostly separates unmetamorphosed and low-grade metamorphic Paleozoic and Mesozoic oceanic rocks on the west from medium- to high-grade metamorphic rocks on the east. Within the quadrangle the lower grade rocks are mostly Mesozoic melange units. To the east, the higher-grade terrane is mostly the Chiwaukum Schist and related gneisses of the Nason terrane and invading mid-Cretaceous stitching plutons. The Early Cretaceous Easton Metamorphic Suite crops out on both sides of the Straight Creek fault and records it's dextral displacement. On the south margin of the quadrangle, the fault separates the lower Eocene Swauk Formation on the east from the upper Eocene and Oligocene(?) Naches Formation and, farther north, it's correlative Barlow Pass Volcanics the west. Stratigraphically equivalent rocks ot the Puget Group crop out farther to the west. Rocks of the Cascade magmatic arc are mostly represented by Miocene and Oligocene plutons, including the Grotto, Snoqualmie, and Index batholiths. Alpine river valleys in the quadrangle record multiple advances and retreats of alpine glaciers. Multiple advances of the Cordilleran ice sheet, originating in the mountains of British Columbia, Canada, have left an even more complex sequence of outwash and till along the western mountain front, up these same alpine river valleys, and over the Puget Lowland.

IMAP↗
USGS2010

Geophysical investigations at Hidden Dam, Raymond, California: Summary of fieldwork and data analysis

Geophysical field investigations have been carried out at the Hidden Dam in Raymond, California for the purpose of better understanding the hydrogeology and seepage-related conditions at the site. Known seepage areas on the northwest right abutment area of the downstream side of the dam are documented by Cedergren. Subsequent to the 1980 seepage study, a drainage blanket with a subdrain system was installed to mitigate downstream seepage. Flow net analysis provided by Cedergren suggests that the primary seepage mechanism involves flow through the dam foundation due to normal reservoir pool elevations, which results in upflow that intersects the ground surface in several areas on the downstream side of the dam. In addition to the reservoir pool elevations and downstream surface topography, flow is also controlled by the existing foundation geology as well as the presence or absence of a horizontal drain within the downstream portion of the dam. The purpose of the current geophysical work is to (1) identify present-day seepage areas that may not be evident due to the effectiveness of the drainage blanket in redirecting seepage water, and (2) provide information about subsurface geologic structures that may control subsurface flow and seepage. These tasks are accomplished through the use of two complementary electrical geophysical methods, self-potentials (SP) and direct-current (DC) electrical resistivity, which have been commonly utilized in dam-seepage studies. SP is a passive method that is primarily sensitive to active subsurface groundwater flow and seepage, whereas DC resistivity is an active-source method that is sensitive to changes in subsurface lithology and groundwater saturation. The focus of this field campaign was on the downstream area on the right abutment, or northwest side of the dam, as this is the main area of interest regarding seepage. Two exploratory self-potential lines were also collected on the downstream left abutment of the dam to identify potential seepage in that area. This report is primarily a summary of the field geophysical data acquisition, with some preliminary results and interpretation. Further work will involve a more rigorous analysis of the geophysical datasets and an examination of a large dataset of historical observations of water levels in a number of observation wells and piezometers compared with reservoir elevation. In addition, a partially saturated flow model will be developed to better understand seepage patterns given the available information about dam construction, geophysical results, and data from installed observation wells and piezometers.

California↗
USGS2010

Clockwise rotation and implications for northward drift of the western Transverse Ranges from paleomagnetism of the Piuma Member, Sespe Formation, near Malibu, California

New paleomagnetic results from mid-Tertiary sedimentary beds in the Santa Monica Mountains reinforce the evidence for large-scale rotation of the western Transverse Ranges, and anisotropy measurements indicate that compaction-induced inclination flattening may resolve a long-standing controversy regarding the original paleolatitude of the rotated block. Previously published paleomagnetic data indicate that post-Oligocene rotation amounts to 70°–110° clockwise, affecting the Channel Islands, Santa Monica Mountains, and Santa Ynez Mountains. The Sespe Formation near Malibu consists of a lower member dominated by nonmarine sandstone and conglomerate and an upper section, the Piuma Member, which consists of gray-red sandstone and mudstone interbedded with minor tuff and limestone beds. The Piuma Member has a paleomagnetic pole at 36.6°N, 326.7°E (A 95min = 5.0°, A 95max = 9.6°), obtained by thermal demagnetization of 34 oriented cores from Oligocene and early Miocene beds. After correcting for plunge of the geologic structure, the data are consistent with significant clockwise rotation (77° ± 7°) of the region relative to stable North America. Rotation of the western Transverse Ranges is generally viewed as a consequence of Pacific–North American plate interactions after 28 Ma, when east–west subduction gave way to northwest transform motion in southern California. Inclinations from the Piuma study indicate a paleolatitude anomaly of 11° ± 7° and are consistent with a mean northward drift that exceeds generally accepted San Andreas fault displacement by a factor of 3. However, sedimentary inclination error may accentuate the anomaly. Anisotropy of isothermal remanent magnetization indicates inclination flattening of approximately 8°, and correction for the effect reduces the paleolatitude anomaly to 5.3° ± 5.8°. Compaction may explain the inclination flattening in these sedimentary rocks, but the process does not adequately explain lower-than-expected inclinations found in previous studies of Miocene volcanic rocks of the western Transverse Ranges.

Geochemistry, Geophysics, Geosystems↗
USGS1978

Significance of age relations above and below upper jurassic ophiolite in the Geysers-Clear Lake region, California

In The Geysers-Clear Lake area of northern California, a fragmented Upper Jurassic ophiolite overlain depositionally by the Great Valley sequence is juxtaposed over deformed and metomorphosed rocks of the Franciscan assemblage along the Coast Range thrust. The basal strata of the Great Valley sequence consist of thick breccias of mafic clasts, identical in composition to the upper part of the ophiolite. These breccias and their contact relations suggest that more than 1 km of the upper part of the ophiolite was locally eroded in early Tithonian time. On the basis of their radiolarian faunas, cherts in the Franciscan assemblage below the ophiolite range in age from Late Jurassic (early Tithonian) to Late Cretaceous (early Cenomanian). Of particular significance is an individual chert body (= The Geysers chert) of this age range. The early Cenomanian radiolarians, except for two occurrences associated with pelagic limestone, are significantly younger than those previously reported from the Franciscan assemblage. The existence of a sequence of Late Jurassic to Late Cretaceous radiolarian chert places critical constraints on subduction models for emplacement of the Franciscan assemblage beneath the Coast Range ophiolite and Great Valley sequence in The Geysers-Clear Lake area. From early Tithonian to post-early Cenomanian time, the Franciscan assemblage received pelagic sedimentation far from any site of subduction. By other data, blueschist metamorphism of subducted Franciscan strata also occurred during this time. The radiolarian data from The Geysers area permit a correlation with Upper Cretaceous pelagic limestones in the Laytonville area northwest of The Geysers and also imply that the Great Valley sequence was never depositionally in contact with the Franciscan assemblage.

California↗
USGS1973

Geologic map of the Grimaldi quadrangle of the Moon

The Grimaldi quadrangle lies at the southwest margin of Oceanus Procellarum about 1,000 km east of Orientale, the youngest o f the lunar multi-ringed basins. The distal ends of the ejecta blanket surrounding the Orient al e basin partly covers the western third of the quadrangle. The relatively small, two-ring Grimaldi basin is in the northwest corner of the quadrangle, and the Humorum basin l ies about 750 km to the southeast. A vestigial multi-ring basin mostly engulfed by mare appears to control the distribution of terra and mare along the southwest margin of Oceanus Procellarum ; the craters Hansteen and Billy are on a northwe s t-trending topographic high which represents part of the ring system of this basin. Terra materials of distinctive texture, apparently unrelated to multi-ring basins and probably of volcanic origin, occupy the central parts of the quadrangle.

IMAP↗
USGS1962

Quaternary geology of the Bellevue area in Blaine and Camas Counties, Idaho

The Bellevue area covers about 350 square miles of a foothill belt between the Rocky Mountains to the north and the Snake River plains to the south. Complexly deformed impure quartzites and limestones of the Mississippian Milligen and Pennsylvanian-Permian Wood River formations were intruded by large bodies of quartz diorite and granodiorite along regional structures trending northwesterly; the intrusions are part of the Cretaceous Idaho batholith. Erosional remnants of the Challis volcanics, dominantly latitic to andesitic in composition and early(?) to middle Tertiary in age, rest unconformably on the older rocks. A sequence of Pliocene Rhyolitic ash flows and basaltic lava flows unconformably overlies the Challis and older rocks and is in turn unconformably overlain by olivine basalt of late Pliocene or early Quaternary age. The main valleys of the area, partly Erosional and partly structural in origin, are underlaind by late Quaternary olivine basalt flows (Snake River basalt) and intercalated lacustrine, fluvial, proglacial sediments. The Big Wood River, the master stream of the area, flows southward through a narrow steep-sided valley in the mountainous country north of the Bellevue area and debouches into a broad alluvial valley, the Wood River Valley, in the foothill belt. The valley has the shape of an isosceles triangle with a ten mile long, east-west base consisting of a ridge of Pliocene volcanics which separates the valley from the Snake River Plains to the south. The river now flows through a narrow gap in the southwest corner of the triangle. A similar, but wider, gap around the east end of the ridge was formerly occupied by the river. The river has been shifted back and forth between these two gaps at least four times during an interval in which six late Quaternary basalt flows erupted in the Bellevue area. Two of the flows caused direct diversion of the river and another was influential in bringing about a diversion on an aggradational fan upstream from the lava dam. Just prior to the Bull Lake stage the river, flowing out the east gap, was blocked but not diverted by the youngest basalt flow in the Bellevue area. During the proglacial aggradation, the river shifted widely on its fan and spilled alternatively out both the east and west gaps. After the Bull Lake stage, the west gap had an advantageous base level relative to the lava-blocked east gap, and the river cut down in the west gap. After the second, Pinedale, proglacial aggradation in the Wood River Valley, the west gap still maintained an advantageous base level, and the river again cut down in the west outlet valley where it remains today. Periglacial deposits completely dominate the sidestream valleys of the Bellevue area. They formed under a rigorous climate during the Pinedale stage, when slope erosion accelerated by frost activated processes caused aggradation of valley floors by local detritus. Even at present the larger sidestreams are so choked with detritus that the streams have not regained control of their valley floors. Recent basalt, comparable in age to the younger flows of the Craters of the Moon National Monument, spread from a rugged, cratered vent several miles south of the Bellevue area. Using degree of weathering, erosion, and soil development as a basis of comparison, this flow provides and end point for estimating the relative ages of the six late Quaternary flows in the Bellevue area.

Idaho↗
USGS2005

Geology and preliminary hydrogeologic characterization of the cell-house site, Berlin, New Hampshire, 2003-04

At the cell-house site, thin, generally less than 20-foot thick overburden, consisting of till and demolition materials, overlies fractured crystalline bedrock. Bedrock at the site consists of gneiss with thin discontinuous lenses of chlorite schist and discontinuous tabular pegmatite. Two distinct fracture domains, with principal trends to the west and northwest, and to the north, overlap near the site. The cell-house site shows principal trends common to both domains. Gneiss is the most abundant rock at the site. Steeply dipping fractures within the gneiss terminate on subhorizontal contacts with pegmatite and on moderately dipping contacts with chlorite schist. Steeply northwest-dipping en Echelon fracture zones, parallel joint zones, and silicified brittle faults show consistent strikes to the northeast. Gently east-dipping to subhorizontal fractures, sub-parallel to gneissosity, strike northeast. The impermeable cap, barrier wall, and bedrock surface topography affect ground-water flow in the overburden. There is relatively little ground-water flow in the overburden in the capped area and a poor hydraulic connection between the overburden and the underlying bedrock over most of the site. The overburden beneath the cap may receive inflow through or beneath the barrier wall, or by flow through vertical fractures in the underlying bedrock beneath the barrier wall. The bedrock aquifer near the river is well connected to the river and head difference in the bedrock across the site are large (greater than 13 ft). Horizontal hydraulic conductivities of 0.2 to 20 ft/d were estimated for the bedrock. Individual fractures or fracture zones likely have hydraulic conductivities greater than the bulk rock. Subhorizontal fractures occur at pegmatite contacts or along chlorite schist lenses and may serve as ground-water conduits to the steeply dipping fractures in gneiss. The effective hydraulic conductivity across the site is likely to be in the low range of the estimated values (0.2 ft/d). Ground water discharges to the river from the bedrock aquifer and is greatest during periods of large river stage fluctuations.

Scientific Investigations Report↗