Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research, Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2012

Seismic reflection/refraction mapping of faulting and regional dips in the eastern Alaska Range

We present the results of a Trans‐Alaska Crustal Transect (TACT) investigation of the upper 2–5 km of the eastern Alaska Range in the vicinity of the Denali fault based on seismic reflection/refraction data, laboratory measurements of rock velocities, and structural mapping. The Denali fault is a major dextral slip structure mappable for more than 2000 km separating the Wrangellia and adjacent terranes to the south from the Yukon‐Tanana and adjacent terranes to the north. Geologic mapping suggests over 400 km of dextral slip has occurred on the fault, yet within the upper 1.5 km of the crust along the TACT corridor, basement rocks juxtaposed along the Denali fault reveal no significant seismic velocity differences, although the fault zone itself is associated with a minor lowering of velocity. The lack of seismic velocity contrast adjacent to the fault is in agreement with laboratory measurements of elastic wave velocities of samples from terranes bordering the fault. Laboratory measurements of elastic wave velocities of the metasedimentary mica‐quartz schists comprising the Yukon‐Tanana basement are highly anisotropic because of preferred orientation of mica and predict significant variations in velocity accompanying variations in foliation dip. Although other interpretations are possible, the northward shallowing of foliation dip of basement rocks in the Yukon‐Tanana terrane combined with the strong anisotropy associated with these highly foliated rocks can explain an observed northward increase in seismic velocity within this terrane. Seismic reflections from basement rocks within the Yukon‐Tanana terrane may originate from variations in anisotropy with depth and/or changes in composition reflecting different proportions of sandstone and shale in the protolith.

Alaska↗
USGS2012

An axial view of a metamorphic core complex: Crustal structure of the Whipple and Chemehuevi Mountains, southeastern California

A 135‐km‐long, NW‐SE trending, seismic refraction/wide‐angle reflection profile provides a unique along‐strike view of the crustal structure of a belt of metamorphic core complexes in southeastern California: the Whipple, Chemehuevi, and Sacramento mountains metamorphic core complexes. Interpretation of the seismic data was done by two‐dimensional forward modeling of travel times and amplitudes. The final model consists of (1) a thin (< 1.5 km) veneer of upper plate and fractured lower plate rocks (velocities of 1.5–5.3 km s −1 ) overlying a fairly homogeneous basement with velocities of 6.0 km s −1 ; (2) a localized, high‐velocity (6.4 km s −1 ) body, situated directly beneath the Whipple Mountains; (3) a 6.3–6.4 km s −1 middle crust that is thickest beneath the core complexes; (4) a 6.65±0.15 km s −1 lower crust; (5) crustal thickness of 27 km with a deeper crustal root (3 km) beneath the Whipple Mountains metamorphic core complex; and (6) a P n velocity of 8.0±0.10 km s −1 . The crustal structure that underlies the belt of metamorphic core complexes provides new insights into the processes that control extension in the deep crust. Upper crustal velocities are higher beneath the Whipple Mountains (where velocities increase to 6.4 km s −1 at ∼5 km depth) than beneath the Chemehuevi and Sacramento mountains. In addition, midcrustal discontinuities rise 2–5 km beneath the Whipple complex compared to the other complexes. These observations support greater uplift and a slightly deeper midcrustal origin for the rocks now exposed in the core of the Whipple Mountains compared to rocks in the Chemehuevi and Sacramento mountains. Despite the enhanced uplift and extension in the Whipple Mountains, the crust is thicker here (30 km) than anywhere else along the Colorado River extensional corridor. This may be in part a relic of compressional and magmatic thickening during the Mesozoic. However, we suggest that inflation of the crust during Tertiary extension was the dominant mechanism. Both mantle‐derived magmatism and lateral ductile inflow in the crust are proposed.

Arizona, California↗
USGS2012

Introduction to special section on the California-Arizona crustal transect: CACTIS, Part 3

The CACTIS (California‐Arizona Crustal Transect Interim Synthesis) workshop in May 1988 brought researchers together in Flagstaff, Arizona, to discuss the geologic evolution and crustal structure of the southern Cordillera between the San Andreas fault in southeastern California and the Colorado Plateau in Arizona [ Sass et al ., 1988]. The first set of papers resulting from the workshop appeared in the Journal of Geophysical Research (JGR) as the special CACTIS 1 section in January 1990 [ Howard et al ., 1990], and a second as CACTIS 2 in November 1990 [ Haxel et al ., 1990]. Twelve papers in this issue form part 3 of the CACTIS series. A final collection of papers will appear in the future as a joint special section with the California Consortium for Crustal Studies (CALCRUST).

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation in western Washington

The Juan de Fuca plate is subducted beneath the North American plate off the coast of Washington at a rate of about 40 mm/yr N68°E. The average principal strain rates (extension reckoned positive) measured in northwestern Washington are as follows: Olympic peninsula 25 km south of Port Angeles from 1982 through 1990, and and near Seattle from 1972 through 1985, and . Both strain measurements are consistent with uniaxial contraction in the direction of plate convergence. Uplift rates inferred from tide gage recordings are about 4 mm/yr on the Pacific coast and near 0 mm/yr farther inland near Seattle. These deformation rates are consistent with a model of the Cascadia subduction zone in which the plate interface beneath the continental slope and outer continental shelf is locked but free to slip farther landward. The limited downdip extent of the locked segment of the plate interface is consistent with a shallow depth (∼20 km) of the isotherm (∼450°C) that defines the brittle‐ductile transition. Small thrust events diagnostic of seismic subduction should then occur only offshore and at shallow depths. The principal strain rates measured from 1972 through 1983 in the back arc region near Richland, Washington, are and .

Washington↗
USGS2012

Strain accumulation along the Denali Fault at the Nenana River and Delta River Crossings, Alaska

Surveys of trilateration networks across the Denali fault at the Nenana River in 1982, 1984, and 1988 and at the Delta River in 1975, 1979, 1982, and 1984 indicate a minor (0.10±0.04 μstrain/yr) northeastward uniaxial extension. The component of right‐lateral shear‐strain accumulation across the fault is not significant at the two‐standard‐deviation level. At the Delta River network the strain accumulation rate decreases rapidly with distance from the fault, but evidence for a similar decrease with distance from the fault is lacking at the Nenana River network. The strain accumulation rates inferred from trilateration are consistent with the very long baseline interferometry (VLBI) measurement reported by Ma et al. (1990) and support their contention that significant right‐lateral shear is not accumulating along the Denali fault at the present time. Savage et al. (1981) had earlier concluded erroneously that preliminary geodetic measurements at the Delta River network demonstrated right‐lateral shear strain accumulation. The absence of significant right‐lateral deformation across the Denali fault in the 1975–1988 interval is in marked contrast with the abundant geomorphic evidence for Holocene right‐lateral secular slip at the rate of 10–20 mm/yr on the Denali fault in this sector.

Alaska↗
USGS2012

Crustal subsidence and extension and Medicine Lake volcano, northern California

The pattern of historical ground deformation, seismicity, and crustal structure near Medicine Lake volcano illustrates a close relation between magmatism and tectonism near the margin of the Cascade volcanic chain and the Basin and Range tectonic province. Between leveling surveys in 1954 and 1989 the summit of Medicine Lake volcano subsided 389±43 mm with respect to a reference bench mark 40 km to the southwest (average rate = 11.1±1.2 mm/yr). A smaller survey across the summit caldera in 1988 suggests that the subsidence rate was 15–28 mm/yr during 1988–1989. Swarms of shallow earthquakes ( M ≤ 4.6) occurred in the region during August 1978, January–February 1981, and September 1988. Except for the 1988 swarm, which occurred beneath Medicine Lake caldera, most historical earthquakes were located at least 25 km from the summit. The spatial relation between subsidence and seismicity indicates (1) radially symmetric downwarping of the volcano's summit and flanks centered near the caldera and (2) downfaulting of the entire edifice along regional faults located 25–30 km from the summit. We propose that contemporary subsidence, seismicity, and faulting are caused by (1) loading of the crust by more than 600 km 3 of erupted products plus a large volume of mafic intrusives; (2) east‐west extension in the western Basin and Range province; and, to a lesser extent, (3) crystallization or withdrawal of magma beneath the volcano. Thermal weakening of the subvolcanic crust by mafic intrusions facilitates subsidence and influences the distribution of earthquakes. Subsidence occurs mainly by aseismic creep within 25 km of the summit, where the crust has been heated and weakened by intrusions, and by normal faulting during episodic earthquake swarms in surrounding, cooler terrain.

California↗
USGS2012

Rift flank uplifts and Hinterland Basins: Comparison of the Transantarctic Mountains with the Great Escarpment of southern Africa

Uplifted rift margins are a common feature of continents and oceans. Two variants of rift flank morphologies have been recognized: One in which the topography warps down from an inland high toward the continental margin, and one where the tropographic peak lies close to the continental margin. The Great Escarpment of southern Africa and the Transantarctic Mountains are examples of the first and the second variants of rift flanks, respectively. Both rift flanks are bordered on their landward side by broad continental basins: the Kalahari and the Wilkes hinterland basins. If these basins are interpreted as flexural “outer lows” that deepen in unison with the uplift of the rift flanks, the lithosphere on the uplifted side is very rigid in both cases (elastic thickness T e of 100 ± 20 km for southern Africa and 110 ± 20 km for East Antarctica). We suggest that the variation in rift flank morphology is caused by the isostatic response to uplift forces of elastic plates sharing different boundary conditions. We model the uplift of the Transantarctic Mountains as an upward deflection of an elastic plate which is broken at the front of the Transantarctic Mountains, and we model the uplift of the Great Escarpment as an upward deflection of a continuous elastic plate that is modified by the downward load of sediments on the continental margin. Although the Transantarctic Mountain uplift is young (60–0 Ma) and the southern African uplift is old (<100 Ma), the different isostatic responses of the two margins are not a function of age, because most loading (sedimentation) and unloading (erosion) took place shortly after rifting. Detailed modeling of topography, gravity, geological markers, and the locations of depocenters suggests that lithospheric rigidity decreases under the Transantarctic Mountains, whereas in southern Africa the decrease occurs not under the Great Escarpment but far seaward under the continental shelf and slope. If the distribution of lithospheric rigidity is indicative of the thermal regime of the lithosphere, then uplifted rift flanks are not always underlain by a thermal anomaly. This and other geological evidence indicate that a single mechanism cannot explain the uplift of both the Antarctic and the African margins.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Variations in the reflectivity of the moho transition zone beneath the Midcontinent Rift System of North America: results from true amplitude analysis of GLIMPCE data

True amplitude processing of The Great Lakes International Multidisciplinary Program on Crustal Evolution seismic reflection data from the Midcontinent Rift System of North America shows large differences in the reflectivity of the Moho transition zone beneath the axial rift, beneath the rift flanks, and outside of the rift. The Moho reflection from the axial rift has a discontinuous, diffractive character marginally stronger (several decibels) than an otherwise transparent lower crust and upper mantle. Beneath the axial rift, Moho is interpreted to be a synrift igneous feature. Beneath the rift flanks, the reflectivity of the Moho transition is generally well developed with two identifiable boundaries, although in places it is weakly reflective to nonreflective, similar to Moho outside the rift. The two boundaries are interpreted as the base of essentially intact, although stretched, prerift Archean crust (upper boundary) and new synrift Moho 1-2 s (6-7 km) deeper (lower boundary). Beneath the rift flanks, the layered reflection Moho transition results from the preexisting crustal composition and fabric modified by synrift igneous processes and extensional tectonic/metamorphic processes. The geologic evidence for extensive basaltic magmatism in the rift is the basis for interpreting the Moho signature as a Keweenawan structure that has been preserved for 1.1 b.y. Extension and magmatism appear to enhance reflectivity in the lower crust and Moho transition zone only where stretching factors are moderate (rift flanks) and not where they are extreme (axial rift). This leads to the prediction that the reflectivity across analogous volcanic passive continental margins should be greatest beneath the moderately stretched continental shelves and should decrease towards the ocean-continent boundary.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation across the Wasatch Fault near Ogden, Utah

Deformation of a 70 by 40‐km trilateration network spanning the north trending Wasatch fault near Ogden, Utah, has been monitored from 1972 through 1990. All but nine of the 200 measurements are consistent with deformation that is linear in time. We presume that those nine observations are contaminated by some blunder in making the measurements and that deformation is linear in time. The strain rate over the 1972–1990 interval across a 40‐km‐wide zone west of the Wasatch fault (hanging wall block) is adequately approximated by a 0.04 ± 0.01 μstrain/yr N85°E±5° uniaxial extension. Adequate coverage of the footwall block is available only over the 1981–1990 interval, and the strain rate across a 30‐km‐wide zone there is approximated by a 0.07 ± 0.03 μstrain/yr N20°E±12° uniaxial extension. The observed extension of the hanging wall block in the direction normal to fault strike suggests that the Wasatch fault may be listric; a planar fault would produce a zone of contraction normal to the fault at the surface of the hanging wall block. The component of extension parallel to fault strike observed on the footwall block is unexplained.

Utah↗
USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗
USGS2012

Seismicity and geometry of a 110‐km‐long blind thrust fault 1. The 1985 Kettleman Hills, California, earthquake

The August 4, 1985, Kettleman Hills earthquake was the third in a sequence of moderate shocks to occur beneath the northern half of a 110‐km‐long fold chain bounding the eastern California Coast Ranges. The 1982 M W =5.4 New Idria, 1983 M W =6.5 Coalinga, and 1985 M W =6.1 Kettleman Hills events define a southward progression of seismic activity beneath the fold. We use teleseismic waveforms, geodetic modeling, hypocenters relocated in a three‐dimensional velocity model, and subsurface structural data to investigate the Kettleman Hills earthquake. The main shock results from motion on a shallowly dipping thrust fault buried at ∼10 km depth. Aftershocks and coseismic fault slip extend 20 km along the fold axis, nearly the full extent of the Kettleman Hills North Dome anticline. Aftershocks occur primarily several kilometers in front of the fault tip and in the core of the anticline. The main shock and several foreshocks occurred at a 2‐km right step in the Quaternary fold axis, which also corresponds to the southern end of the 1983 Coalinga and northern end of the 1985 Kettleman Hills aftershock zones. From this we infer that the step in the fold is caused by an offset or tear in the underlying fault. The scalar seismic moment is 1.6 × 10 18 N m, consistent with the geodetic deformation, and the duration of rupture is 16 s, 3–4 times greater than for the average earthquake with this scalar moment. The slow rate of moment release provides an explanation for the low level of ground shaking and low local magnitude reported for the event. The peak of the geodetic uplift is located 5 km perpendicular to the Quaternary fold axis. We argue that the fault is propagating northeast into the undeformed San Joaquin Valley sediments and that the overlying fold is growing at about 0.5 mm/yr.

California↗
USGS2012

Limitations of quantitative analysis of deep crustal seismic reflection data: Examples from GLIMPCE

Amplitude preservation in seismic reflection data can be obtained by a relative true amplitude (RTA) processing technique in which the relative strength of reflection amplitudes is preserved vertically as well as horizontally, after compensating for amplitude distortion by near-surface effects and propagation effects. Quantitative analysis of relative true amplitudes of the Great Lakes International Multidisciplinary Program on Crustal Evolution seismic data is hampered by large uncertainties in estimates of the water bottom reflection coefficient and the vertical amplitude correction and by inadequate noise suppression. Processing techniques such as deconvolution, F-K filtering, and migration significantly change the overall shape of amplitude curves and hence calculation of reflection coefficients and average reflectance. Thus lithological interpretation of deep crustal seismic data based on the absolute value of estimated reflection strength alone is meaningless. The relative strength of individual events, however, is preserved on curves generated at different stages in the processing. We suggest that qualitative comparisons of relative strength, if used carefully, provide a meaningful measure of variations in reflectivity. Simple theoretical models indicate that peg-leg multiples rather than water bottom multiples are the most severe source of noise contamination. These multiples are extremely difficult to remove when the water bottom reflection coefficient is large (>0.6), a condition that exists beneath parts of Lake Superior and most of Lake Huron.

Great Lakes↗
USGS2012

Interseismic deformation at the Nankai Trough, Japan, subduction zone

Uplift along the coast of southwestern Japan following the 1944 Tonankai ( M s = 8.0) and 1946 Nankaido ( M s = 8.2) earthquakes has been inferred from the 1950–1985 tide gage records. Although uplift rates vary with geographic position, the temporal dependence at each site can be described as the superposition of an exponentially decaying (time constant ∼5 years) transient, significant only in the first decade postseismic, and a steady interseismic rate. The steady interseismic uplift rate is defined only over the 1956–1985 interval, but the linearity in time ofthat uplift record is such that uplift over the remainder of the interseismic cycle (∼80 years) might reasonably be expected to occur at the same rate. Moreover, the spatial pattern and magnitude of the steady uplift rate are reasonably close to those predicted by a simple dislocation model of subduction. However, the currently observed steady uplift rate is not consistent with the uplift rate inferred from geodetic leveling for the final half of the previous earthquake cycle. Thus, either the hypothesis of a steady interseismic uplift rate after the first decade postseismic is wrong or the strain accumulation pattern for one earthquake need not be the same as for the preceding earthquake on the same segment.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic constraints on the nature of lower crustal reflectors beneath the extending Southern Transition Zone of the Colorado Plateau, Arizona

We determine the reflection polarity and exploit variations in P and S wave reflectivity and P wave amplitude versus offset (AVO) to constrain the origin of lower crustal reflectivity observed on new three-component seismic data recorded across the structural transition of the Colorado Plateau. The near vertical incidence reflection data were collected by Stanford University in 1989 as part of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that traversed the Arizona Transition Zone of the Colorado Plateau. The results of independent waveform modeling methods are consistent with much of the lower crustal reflectivity resulting from thin, high-impedance layers. The reflection polarity of the cleanest lower crustal events is positive, which implies that these reflections result from high-velocity contrasts, and the waveform character indicates that the reflectors are probably layers less than or approximately equal to 200 m thick. The lower crustal events are generally less reflective to incident S waves than to P waves, which agrees with the predicted behavior of high-velocity mafic layering. Analysis of the P wave AVO character of lower crustal reflections demonstrates that the events maintain a constant amplitude with offset, which is most consistent with a mafic-layering model. One exception is a high-amplitude (10 dB above background) event near the base of lower crustal reflectivity which abruptly decreases in amplitude at increasing offsets. The event has a pronounced S wave response, which along with its negative AVO trend is a possible indication of the presence of fluids in the lower crust. The Arizona Transition Zone is an active but weakly extended province, which causes us to discard models of lower crustal layering resulting from shearing because of the high degree of strain required to create such layers. Instead, we favor horizontal basaltic intrusions as the primary origin of high-impedance reflectors based on (1) The fact that most xenoliths in eruptive basalts of the Transition Zone are of mafic igneous composition, (2) indications that a pulse of magmatic activity crossed the Transition Zone in the late Tertiary period, and (3) the high regional heat flow observed in the Transition Zone. The apparent presence of fluids near the base of the reflective zone may indicate a partially molten intrusion. We present a mechanism by which magma can be trapped and be induced to intrude horizontally at rheologic contrasts in extending crust.

Arizona↗
USGS2012

Paleomagnetism and geochronology of 23 Ma gabbroic intrusions in the Keku Strait, Alaska, and implications for the Alexander Terrane

Samples of Tertiary gabbro from 24 sites in the Keku Strait, Alaska, help constrain the displacement history of the Alexander terrane. Step heating experiments on a plagioclase separate from these previously undated intrusions indicate a discordant 40 Ar/ 39 Ar age of 23.1 ± 1.7 Ma. The characteristic magnetization resides in magnetite, is easily isolated by thermal and alternating field demagnetization, and has both normal and reversed polarities. The mean paleomagnetic pole, with no structural correction, is latitude 87.1°N, longitude 141.6°E, A 95 = 10.1°, with N = 20 sites. This pole indicates insignificant tectonic displacement (0.5° ± 8.2° southward) and rotation (0.6° ± 15.2° counterclockwise). We therefore conclude that any northward displacement or vertical axis rotation of the Alexander terrane, and/or tilting in the vicinity of the Keku Strait must have occurred before 23 Ma.

Alaska↗
USGS2012

Paleomagnetism of the Late Triassic Hound Island Volcanics: Revisited

The collision and accretion of the Alexander terrane profoundly influenced the geologic history of Alaska and western Canada; however, the terrane's displacement history is only poorly constrained by sparse paleomagnetic studies. We studied the paleomagnetism of the Hound Island Volcanics in order to evaluate the location of the Alexander terrane in Late Triassic time. We collected 618 samples at 102 sites in and near the Keku Strait, Alaska, from the Late Triassic Hound Island Volcanics, the Permian Pybus Formation, and 23-Ma gabbroic intrusions. We found three components of magnetization in the Hound Island Volcanics. The high-temperature component (component A) resides in hematite and magnetite and was found only in highly oxidized lava flows in a geographically restricted area. We think it is primary, or acquired soon after eruption of the lavas, principally because the directions pass a fold test. The paleolatitude indicated by this component (19.2° ± 10.3°) is similar to those determined for various portions of Wrangellia, consistent with the geologic interpretation that the Alexander terrane was with the Wrangellia terrane in Late Triassic time. We found two overprint directions in the Hound Island Volcanics. Component B was acquired 23 m.y. ago due to intrusion of gabbroic dikes and sills. This interpretation is indicated by the similarity of upper-hemisphere directions in the Hound Island Volcanics to those in the gabbro. Component C, found in both the Hound Island Volcanics and the Permian Pybus Formation, is oriented northeast and down, fails a regional fold test, and was acquired after regional deformation around 90 to 100 Ma. This overprint direction yields a paleolatitude similar to, but slightly higher than, slightly older rocks from the Coast Plutonic Complex, suggesting that the Alexander terrane was displaced 17° in early Late Cretaceous time. The occurrence of these two separate overprinting events provides a satisfying explanation of the earlier puzzling results from the Hound Island Volcanics (Hillhouse and Grommé, 1980). Finally, great-circle analysis of the paleomagnetic data from the Pybus Formation suggests the Alexander terrane may have been in the northern hemisphere in Permian time.

Alaska↗
USGS2012

Paleoseismology along the 1980 surface rupture of the Irpinia Fault: Implications for earthquake recurrence in the southern Apennines, Italy

The Irpinia fault was the source of the M s 6.9 1980 Irpinia earthquake and produced the first unequivocal historical surface faulting in Italy. Trenching of the 1980 fault scarp at Piano di Pecore, a flat intermontane basin about 5 km south of the 1980 instrumental epicenter, provides the first data on earthquake recurrence intervals, slip per event, and slip rate on a major normal fault in the Southern Apennines fault zone. The trenches exposed evidence of four pre-1980 paleoearthquakes that occurred during the past 8600 years. A best estimate average recurrence interval is 2150 years, although the time interval between individual events varies by as much as a factor of 2. Each paleo earthquake is similar to the 1980 surface rupture in amount of slip and style of deformation, which suggests that the 1980 event is characteristic for the Irpinia fault. Slip per event values average 61 cm. The net vertical displacement of 2.12–2.36 m since 8600 cal year B.P. observed in the trenches gives a vertical slip rate of 0.25–0.35 mm/yr, a dip slip rate of 0.29–0.40 mm/yr, and an extension rate of 0.14–0.20 mm/yr. Although fault behavior data are only available for the Irpinia fault they provide a starting point for evaluating earthquake recurrence and rates of deformation in southern Apennines. They suggest that (1) fault specific earthquake recurrence intervals based on the historical seismic record overestimates the occurrence of large magnitude ( M 7) earthquakes and (2) the Holocene rate of extension across the Apennines is ≤1 mm/yr. The 1980 earthquake and the paleoseismologic observations show that repeated and localized surface faulting occurs in southern Apennines and leaves subtle but distinct geomorphic evidence that can be detected with detailed and careful investigation.

Apennine Mountains↗
USGS2012

Deformation from 1973 to 1987 in the epicentral area of the 1959 Hebgen Lake, Montana, earthquake (Ms = 7.5)

A 40‐km aperture trilateration network centered on the 1959 Hebgen Lake earthquake epicenter has been surveyed in 1973, 1974, 1976, 1978, 1981, 1984, and 1987. The deformation inferred from those surveys is described roughly by a uniaxial, 0.266 ± 0.014 μstrain/yr, N15°E ± 1°extension that is uniform in both time and space. That extension is orthogonal to the strike (N78°W ± 5°) of the 1959 rupture plane inferred from focal mechanism solutions. The absence of strain accumulation in the N75°W direction suggests that the source of deformation must be greatly elongated in that direction. Looked at in greater detail, the deformation is found to be concentrated in the northern part of the network. The zone of concentrated deformation coincides with a part of a well‐defined trend in seismicity that extends at least 100 km N75°W from the Sour Creek resurgent dome in the Yellowstone caldera. Extension perpendicular to that trend is indicated by focal mechanism solutions. Thus, the zone of rifting identified within the Hebgen Lake network apparently extends east southeast to the Yellowstone caldera. About 8 mm/yr extension is observed across a 20‐km width within the zone.

Montana, Wyoming↗