Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Topography of closed depressions, scarps, and grabens in the North Tharsis region of Mars: implications for shallow crustal discontinuities and graben formation

Using Viking Orbiter images, detailed photoclinometric profiles were obtained across 10 irregular depressions, 32 fretted fractures, 49 troughs and pits, 124 solitary scarps, and 370 simple grabens in the north Tharsis region of Mars. These data allow inferences to be made on the shallow crustal structure of this region. The frequency modes of measured scarp heights correspond with previous general thickness estimates of the heavily cratered and ridged plains units. The depths of the flat-floored irregular depressions (55-175 m), fretted fractures (85-890 m), and troughs and pits (60-1620 m) are also similar to scarp heights (thicknesses) of the geologic units in which these depressions occur, which suggests that the depths of these flat-floored features were controlled by erosional base levels created by lithologic contacts. Although the features have a similar age, both their depths and their observed local structural control increase in the order listed above, which suggests that the more advanced stages of associated fracturing facilitated the development of these depressions by increasing permeability. If a ground-ice zone is a factor in development of these features, as has been suggested, our observation that the depths of these features decrease with increasing latitude suggests that either the thickness of the ground-ice zone does not increase poleward or the depths of the depressions were controlled by the top of the ground-ice zone whose depth may decrease with latitude. Deeper discontinuities are inferred from fault-intersection depths of 370 simple grabens (assuming 60° dipping faults that initiate at a mechanical discontinuity) in Tempe Terra and Alba Patera and from the depths of the large, flat-floored troughs in Tempe Terra. The frequency distributions of these fault-intersection and large trough depths show a concentration at 1.0-1.6 km depth, similar to data obtained for Syria, Sinai, and Lunae Plana. The consistency of these depth data over such a large region of western Mars suggests that a discontinuity or a process that transcends local and regional geology is responsible for the formation of these features. If this discontinuity is represented by the base of the cryosphere, its uniform depth over 55° of latitude suggests that the cryosphere did not thicken poleward. Alternatively, the concentration of depths at 1.0-1.6 km may represent the upper level of noneruptive dike ascent (lateral dike propagation) of Mars, which is controlled by gravity and atmospheric pressure and magma and country-rock characteristics, and was probably controlled, in part, by ground ice. Fault-intersection depths in the north Tharsis region locally extend down to a depth of 5-7 km. The depth data between 2 and 3 km are attributed to the discontinuity at the interface of megaregolith and basement or to the upper limit of noneruptive dike ascent of magma with a high volatile content. Intersection depths greater than 3 km, which were found at Alba Patera, may be due to the megaregolith-basement discontinuity, which was buried and depressed by volcanic loading, or to the upper level of noneruptive dike ascent of magma with a low volatile content. The near absence of narrow simple grabens with fault-initiation depths less than 0.6-1.0 km in this study area, as well as in most of western Mars, suggests that this depth represents the minimum depth that normal faults can initiate; at shallower depths tension cracks or joints would form instead. This hypothesis is supported by the application of the Griffith failure criterion to this minimum depth of normal fault initiation, which suggests that shallow crustal materials have a tensile strength of 2-4 MPa throughout most of western Mars, in close agreement with previous estimates of tensile strength of martian basaltic rock.

Icarus↗

Middle Holocene hydrologic changes catalyzed by river avulsion in Big Soda Lake, Nevada, USA

Big Soda Lake is a 63 m deep, 1.6 km 2 maar lake in the Great Basin of Nevada, USA. Water level in the lake is controlled by groundwater inputs from the surrounding aquifer and the only surface water input is rainfall, which is negligible. A core taken in 2010 records an 8.75 m depositional history of the lake. A radiocarbon date on fossil pollen from 8.4 m below the sediment water interface (BSWI) of 14,740 (+1120/−825) cal yr BP suggests that the core may cover the latest Pleistocene and Holocene depositional history of the lake. Stable isotope values of oxygen and carbon (δ 18 O and δ 13 C) on authigenic calcite, diatom assemblages, and sedimentary structures all show consistent hydrological change from initially saline water at the bottom of the core to fresh/brackish water at about 6 m BWSI, back to saline water at 4.3 m. At 4.3 m depth, the bedding and color of the core change abruptly, and the stable- isotope and diatom assemblages indicate a consistently hypersaline lake until near the top of the core, when fresh water entered the lake due to irrigation and canal building in the twentieth century. The stable isotopes of the calcite abruptly change from inversely varying isotopic compositions below 4.3 m depth to covarying above. This break between relatively fresh and saline conditions in the lake occurs during the middle Holocene, although the exact timing of the transition is unknown due to variability in the 14 C age determinations. The cause for such an abrupt change is difficult to explain through climate shifts, as evidence suggests climate in the Great Basin was different from what the Big Soda Lake record indicates in the Early Holocene. It is hypothesized that the Walker River flowed to the Carson River basin before 5600 cal yr BP, with water either flowing directly into the lake or raising the groundwater table sufficiently to freshen Big Soda Lake. The initial increase in salinity likely was caused by decreased flow of the Walker River due to Middle Holocene aridity. The lake level lowered slowly, and more saline conditions prevailed until 4.3 m depth when water from the Walker River stopped flowing into the Carson River basin. Above 4.3 m depth, diatom and isotopic evidence indicates that the lake became consistently saline. The isotopic and diatom assemblage transitions observed in Big Soda Lake sediment are not consistent with climate reconstructions and demonstrate that hydrologic shifts in a basin can be an important driver of change regardless of climatic conditions. However, climate shifts may also play a role in the hydrologic changes by supplying more or less water to river courses that may induce river avulsion.

Nevada↗

Paleoseismology and paleogeodesy using coral microatolls

Establishing the rupture extent and slip distribution of individual paleo-earthquakes is vital for assessing fault behavior including the persistence of rupture segmentation, recurrence patterns, and similarity of successive events, key issues in both fault mechanics and hazard assessment. Techniques with high temporal and geodetic precision as well as a wide distribution of study sites are necessary to investigate past earthquakes in such detail. Coral microatoll growth is one of the best types of geologic record for paleoseismology and paleogeodesy given these needs, as it provides long, continuous, widely distributed records of centimeter-scale vertical tectonic motion with potentially annual-level temporal precision. This chapter describes the process of interpreting microatoll growth records to obtain time series of relative sea level, tectonic vertical deformation fields, and finally slip and coupling parameters on an underlying fault interface.

Book chapter↗

Hydraulic modeling development and application in water resources engineering

The use of modeling has become widespread in water resources engineering and science to study rivers, lakes, estuaries, and coastal regions. For example, computer models are commonly used to forecast anthropogenic effects on the environment, and to help provide advanced mitigation measures against catastrophic events such as natural and dam-break floods. Linking hydraulic models to vegetation and habitat models has expanded their use in multidisciplinary applications to the riparian corridor. Implementation of these models in software packages on personal desktop computers has made them accessible to the general engineering community, and their use has been popularized by the need of minimal training due to intuitive graphical user interface front ends. Models are, however, complex and nontrivial, to the extent that even common terminology is sometimes ambiguous and often applied incorrectly. In fact, many efforts are currently under way in order to standardize terminology and offer guidelines for good practice, but none has yet reached unanimous acceptance. This chapter provides a view of the elements involved in modeling surface flows for the application in environmental water resources engineering. It presents the concepts and steps necessary for rational model development and use by starting with the exploration of the ideas involved in defining a model. Tangible form of those ideas is provided by the development of a mathematical and corresponding numerical hydraulic model, which is given with a substantial amount of detail. The issues of model deployment in a practical and productive work environment are also addressed. The chapter ends by presenting a few model applications highlighting the need for good quality control in model validation.

Book chapter↗

Supporting open collaboration in science through explicit and linked semantic description of processes

The Web was originally developed to support collaboration in science. Although scientists benefit from many forms of collaboration on the Web (e.g., blogs, wikis, forums, code sharing, etc.), most collaborative projects are coordinated over email, phone calls, and in-person meetings. Our goal is to develop a collaborative infrastructure for scientists to work on complex science questions that require multi-disciplinary contributions to gather and analyze data, that cannot occur without significant coordination to synthesize findings, and that grow organically to accommodate new contributors as needed as the work evolves over time. Our approach is to develop an organic data science framework based on a task-centered organization of the collaboration, includes principles from social sciences for successful on-line communities, and exposes an open science process. Our approach is implemented as an extension of a semantic wiki platform, and captures formal representations of task decomposition structures, relations between tasks and users, and other properties of tasks, data, and other relevant science objects. All these entities are captured through the semantic wiki user interface, represented as semantic web objects, and exported as linked data.

Conference Paper↗

The frequency and intensity of Atlantic hurricanes and their influence on the structure of south Florida mangrove communities

Hurricanes are formidable forces that wreak havoc on society and nature alike. Mangrove ecosystems are especially vulnerable because they thrive in the intertidal zone of tropical regions where hurricanes originate and are most frequent. Because mangroves are found at the land-sea interface where hurricanes are often most intense, these coastal forests are subject to damage from both high wind and surge. Mangroves are also an important habitat for many colonial and migratory birds and other wildlife, along with being nursery grounds for our fisheries. The fate of mangrove habitat as influenced by hurricanes may be threatened in the future under a global warming environment that might yield more intense storms than have been previously observed. Simulation models of hurricane abiotics and mangrove community dynamics have been developed to evaluate the effects of hurricanes on mangrove habitat across the South Florida landscape. Model applications show that hurricane frequency and intensity have varied spatially across Florida’s lower peninsula over the last century of record. Hindcast simulations of actual hurricane tracks and conditions seem to account for the structural composition of modernday mangrove forests across South Florida. A recurrence interval of major storms every 30 years over the last century is the major factor controlling mangrove ecosystem dynamics in South Florida. Some climate change models predict an increase in hurricane intensity over the next century that may further alter the structure and composition of our mangrove ecosystems. Model results of climate change scenarios indicate that future mangrove forests are likely to be diminished in stature and perhaps include a higher proportion of red mangroves. This modeling approach offers the ability to assess decadal and longer time scale changes in hurricane behavior and its effects on community structure and distribution of important plant associations such as the fate of mangrove habitat.

Florida↗

The influence of hydrology on lacustrine sediment contaminant records

The way water flows to a lake, through streams, as runoff, or as groundwater, can control the distribution and mass of sediment and contaminants deposited. Whether a lake is large or small, deep or shallow, open or closed, the movement of water to a lake and the circulation patterns of water within a lake control how and where sediment and contaminants are deposited. Particle-associated contaminants may stay close to the input source of contamination or be transported by currents to bathymetric lows. A complex morphology of the lake bottom or shoreline can also affect how contaminants will be distributed. Dissolved contaminants may be widely dispersed in smaller lakes, but may be diluted in large lakes away from the source. Although dissolved contaminants may not be deposited in lake sediments, the impact of dissolved contaminants (such as nitrogen) may be reflected by the ecosystem. For instance, increased phosphorus and nitrogen may increase organic content or algal biomass, and contribute to eutrophication of the lake over time. Changes in oxidation-reduction potential at the sediment-water interface may either release some contaminants to the water column or conversely deposit other contaminants to the sediment depending on the compound’s chemical characteristics. Changes in land use generally affect the hydrology of the watershed surrounding a lake, providing more runoff if soil binding vegetation is removed or if more impervious cover (roads and buildings) is increased. Groundwater inputs may change if pumping of the aquifer connected to the lake occurs. Even if groundwater is only a small portion of the volume of water entering a lake, if contaminant concentrations in the aquifer are high compared to surface water inputs, the mass of contaminants from groundwater may be as, or more, important than surface water contributions.

Book chapter↗

Benthic phosphorus regeneration in the Potomac River Estuary

The flux of dissolved reactive phosphate from Potomac riverine and estuarine sediments is controlled by processes occurring at the water-sediment interface and within surficial sediment. In situ benthic fluxes (0.1 to 2.0 mmoles m-2 day-1) are generally five to ten times higher than calculated diffusive fluxes (0.020 to 0.30 mmoles m-2 day-1). The discrepancy between the two flux estimates is greatest in the transition zone (river mile 50 to 70) and is attributd to macrofaunal irrigation. Both in situ and diffusive fluxes of dissolved reactive phosphate from Potomac tidal river sediments are low while those from anoxic lower estuarine sediments are high. The net accumulation rate of phosphorus in benthic sediment exhibits an inverse pattern. Thus a large fraction of phosphorus is retained by Potomac tidal river sediments, which contain a surficial oxidized layer and oligochaete worms tolerant of low oxygen conditions, and a large fraction of phosphorus is released from anoxic lower estuary sediments. Tidal river sediment pore waters are in equilibrium with amorphous Fe (OH)3 while lower estuary pore waters are significantly undersaturated with respect to this phase. Benthic regeneration of dissolved reactive phosphorus is sufficient to supply all the phosphorus requirements for net primary production in the lower tidal river and transition-zone waters of the Potomac River Estuary. Benthic regeneration supplies approximately 25% as much phosphorus as inputs from sewage treatment plants and 10% of all phosphorus inputs to the tidal Potomac River. When all available point source phosphorus data are put into a steady-state conservation of mass model and reasonable coefficients for uptake of dissolved phosphorus, remineralization of particulate phosphorus, and sedimentation of particulate phosphorus are used in the model, a reasonably accurate simulation of dissolved and particulate phosphorus in the water column is obtained for the summer of 1980. ?? 1982 Dr W. Junk Publishers.

Hydrobiologia↗

Benthic fluxes in San Francisco Bay

Measurements of benthic fluxes have been made on four occasions between February 1980 and February 1981 at a channel station and a shoal station in South San Francisco Bay, using in situ flux chambers. On each occasion replicate measurements of easily measured substances such as radon, oxygen, ammonia, and silica showed a variability (??1??) of 30% or more over distances of a few meters to tens of meters, presumably due to spatial heterogeneity in the benthic community. Fluxes of radon were greater at the shoal station than at the channel station because of greater macrofaunal irrigation at the former, but showed little seasonal variability at either station. At both stations fluxes of oxygen, carbon dioxide, ammonia, and silica were largest following the spring bloom. Fluxes measured during different seasons ranged over factors of 2-3, 3, 4-5, and 3-10 (respectively), due to variations in phytoplankton productivity and temperature. Fluxes of oxygen and carbon dioxide were greater at the shoal station than at the channel station because the net phytoplankton productivity is greater there and the organic matter produced must be rapidly incorporated in the sediment column. Fluxes of silica were greater at the shoal station, probably because of the greater irrigation rates there. N + N (nitrate + nitrite) fluxes were variable in magnitude and in sign. Phosphate fluxes were too small to measure accurately. Alkalinity fluxes were similar at the two stations and are attributed primarily to carbonate dissolution at the shoal station and to sulfate reduction at the channel station. The estimated average fluxes into South Bay, based on results from these two stations over the course of a year, are (in mmol m-2 d-1): O2 = -27 ?? 6; TCO2 = 23 ?? 6; Alkalinity = 9 ?? 2; N + N = -0.3 ?? 0.5; NH3 = 1.4 ?? 0.2; PO4 = 0.1 ?? 0.4; Si = 5.6 ?? 1.1. These fluxes are comparable in magnitude to those in other temperate estuaries with similar productivity, although the seasonal variability is smaller, probably because the annual temperature range in San Francisco Bay is smaller. Budgets constructed for South San Francisco Bay show that large fractions of the net annual productivity of carbon (about 90%) and silica (about 65%) are recycled by the benthos. Substantial rates of simultaneous nitrification and denitrification must occur in shoal areas, apparently resulting in conversion to N2 of 55% of the particulate nitrogen reaching the sediments. In shoal areas, benthic fluxes can replace the water column standing stocks of ammonia in 2-6 days and silica in 17-34 days, indicating the importance of benthic fluxes in the maintenance of productivity. Pore water profiles of nutrients and Rn-222 show that macrofaunal irrigation is extremely important in transport of silica, ammonia, and alkalinity. Calculations of benthic fluxes from these profiles are less accurate, but yield results consistent with chamber measurements and indicate that most of the NH3, SiO2, and alkalinity fluxes are sustained by reactions occurring throughout the upper 20-40 cm of the sediment column. In contrast, O2, CO2, and N + N fluxes must be dominated by reactions occurring within the upper one cm of the sediment-water interface. While most data support the statements made above, a few flux measurements are contradictory and demonstrate the complexity of benthic exchange. ?? 1985 Dr W. Junk Publishers.

California↗

Transmission electron microscopy of subsolidus oxidation and weathering of olivine

Olivine crystals in basaltic andesites which crop out in the Abert Rim, south-central Oregon have been studied by high-resolution and analytical transmission electron microscopy. The observations reveal three distinct assemblages of alteration products that seem to correspond to three episodes of olivine oxidation. The olivine crystals contain rare, dense arrays of coherently intergrown Ti-free magnetite and inclusions of a phase inferred to be amorphous silica. We interpret this first assemblage to be the product of an early subsolidus oxidation event in the lava. The second olivine alteration assemblage contains complex ordered intergrowths on (001) of forsterite-rich olivine and laihunite (distorted olivine structure with Fe3+ charge balanced by vacancies). Based on experimental results for laihunite synthesis (Kondoh et al. 1985), these intergrowths probably formed by olivine oxidation between 400 and 800??C. The third episode of alteration involves the destruction of olivine by low-temperature hydrothermal alteration and weathering. Elongate etch-pits and channels in the margins of fresh olivine crystals contain semi-oriented bands of smectite. Olivine weathers to smectite and hematite, and subsequently to arrays of oriented hematite crystals. The textures resemble those reported by Eggleton (1984) and Smith et al. (1987). We find no evidence for a metastable phase intermediate between olivine and smectite ("M" - Eggleton 1984). The presence of laihunite exerts a strong control on the geometry of olivine weathering. Single laihunite layers and laihunite-forsteritic olivine intergrowths increase the resistance of crystals to weathering. Preferential development of channels between laihunite layers occurs where growth of laihunite produced compositional variations in olivine, rather than where coherency-strain is associated with laihunite-olivine interfaces. ?? 1990 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

The chemical and isotopic record of rock-water interaction in the Sherman Granite, Wyoming and Colorado

Chemical, isotopic, radiographic, and rock-leaching data are combined to describe the effects of rock-water interactions in core samples of petrographically fresh, 1.43 b.y.-old Sherman Granite. The data serve to identify sensitive indicators of incipient alteration and to estimate the degree, pathways, and timing of element mobilization. Unfractured core samples of Sherman Granite are remarkably fresh by most chemical or isotopic criteria, but incipient alteration is indicated by the abundance and distribution of uranium and the degree of radioactive equilibration of uranium with its decay products. Uranium abundances which are out of equilibrium with lead decay products indicate remobilization of a portion (3 to 60 percent) of original uranium in late Phanerozoic time. Association of uranium with minor but pervasive secondary alteration products also indicates some remobilization. The amount of apparent uranium mobility in unfractured Sherman Granite (3 to 60 percent) is small compared to the results of similar studies of Archean granites from nearby localities. Chemical and isotopic data evaluated as a function of core-sample depth suggest a uranium migrational pathway involving near-surface leaching and reconcentration at depth. Movement of solutions through the upper 200 ft (60 m) of Sherman Granite is fracture controlled, and brecciated granite shows more obvious petrographic, chemical, and isotopic evidence of alteration and multi-element redistribution. Laboratory experiments using freshly crushed Sherman Granite confirm that uranium is leached in preference to elements such as Si, Mg, Ca, and K, and that leachable uranium is situated close to the solid-liquid interface; perhaps as uranium along grain boundaries, in crystal defects, or on cleavage traces of minerals that exclude uranium from their structure. ?? 1981 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

Compositional evidence regarding the influx of interplanetary materials onto the lunar surface

Siderophilic element/Ir ratios are higher in mature lunar soils from highlands sites than in those from mare sites. We infer that the population of materials responsible for the early intense bombardment of the Moon had high ratios, and that the population responsible for the essentially constant flux has low ratios. No group of chondrites has siderophile/Ir ratios identical to those in the mare or highlands soils; CM chondrites are the most similar, and CM-like materials may account for a major fraction of Earth-crossing materials during the past 3.7 b.y. Siderophile/Ir ratios may be used to determine the amount of highlands regolith in soils or breccias from the mare-highlands interface areas (Apollo 15 and 17), and to infer the time of formation of highlands breccias whose sideropbiles originated in mature soils. Arguments are summarized against the viewpoint that the siderophiles in most highlands breccias originated in basin-forming projectiles. Differences in mature soil siderophile concentrations at Apollo 14 and 16 indicate a substantially greater concentration at the latter site immediately following the Imbrium event. Siderophile concentrations are used to estimate mean regolith depths at the landing sites; as relative values these are more precise than estimates based on seismic or crater observations. The longlived flux is calculated to be 2.9 g cm −2 b.y. −1 averaged over the past 3.7 b.y. A consideration of the relationship between mass fluence and time indicates that the mass flux decreased with a half-life of about 40 m.y. immediately following the Imbrium event.

The Moon↗

Role of reef fauna in sediment transport and distribution - Studies from Tektite I and II

1. Reef organisms may play a major role in the transport and distribution of sediment on the sea floor adjacent to coral reefs. 2. Some fish such as Malacanthus plumieri (Bloch) selectively transport and collect certain types of sediment (such as larger coral and shell fragments). 3. The random movement of crawling or burrowing organisms may cause a large amount of sediment to be shifted laterally on the sea floor. On slopes, a net downhill displacement may result. 4. The surface configuration and internal structure of the sediment is rapidly changed by faunal mixing. Ripple marks formed by waves or currents are obliterated by the activity of organisms in only a few weeks in the environment studied. Internal structure (bedding) near the sediment-water interface is similarly destroyed in a short period of time. 5. Larger clasts (including empty shells) on the sea floor tend to be buried by faunal undermining. The rate of burial depends primarily on the grain size of the substrate. 6. The random movement of fauna on the sea floor may produce a predominantly concave-up orientation of pelecypod shells and shell fragments on the sea floor - the opposite of that produced by the activity of waves or currents. ?? 1973 Biologischen Anstalt Helgoland.

Helgoländer Wissenschaftliche Meeresuntersuchungen↗

Natural radioisotope210Pb as an indicator of origin of fine-grained sediment

Distribution of210Pb in sediments on the South Texas Continental Shelf is related to dynamics of the sedimentary transport processes. This radioisotope, whose concentration is time-dependent, defines three depocenters on the shelf. In addition, the variation of210Pb activity at the sediment/water interface delineates areas of terrigenous sedimentation from hemipelagic sedimentation. ?? 1985 Springer-Verlag New York Inc.

Geo-Marine Letters↗

Mobility of organic solvents in water-saturated soil materials

This investigation presents an analysis of the mobility of 37 organic solvents in saturated soil-water systems, focusing on adsorption phenomena at the solid-liquid interface This analysis was made, in part, by applying predictive expressions that estimate the potential magnitude of adsorption by soil materials Of the 37 solvents considered, 19 were classified as either "very highly mobile" or "highly mobile" and, thus, would have little tendency to be retained by soils to a significant extent, 12 were considered to have medium mobility and 6 low mobility None of these solvents were in the immobile class The limited information available indicates that these predictive expressions yield satisfactory first approximations of the magnitude of adsorption of these solvents by soil materials ?? 1985 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗

Seepage meters and Bernoulli's revenge

Evaluation of seepage data from a network of 50 permanently deployed submarine seepage meters, specially constructed from fiberglass, indicates that the devices artificially advect (Bernoulli effect) shallow ground water. Reverse flow into the rock was not observed even when adjacent piezometers installed 2-m to 20-m below the rock-water interface indicated negative groundwater heads. Quantitative testing of five different designs, including conventional end-of-oil-drum designs, indicates that meters presenting positive relief on the sea floor are subject to the Bernoulli effect when placed in areas where there are waves and/or currents. Advection does not appear to be caused by flexing of the collection bags.

Florida↗

Reactive flow models of the Anarraaq Zn-Pb-Ag deposit, Red Dog district, Alaska

The Red Dog ore deposit district in the Brooks Range of northern Alaska is host to several high-grade, shale-hosted Zn + Pb deposits. Due to the complex history and deformation of these ore deposits, the geological and hydrological conditions at the time of formation are poorly understood. Using geological observations and fluid inclusion data as constraints, numerical heat and fluid flow simulations of the Anarraaq ore deposit environment and coupled reactive flow simulations of a section of the ore body were conducted to gain more insight into the conditions of ore body formation. Results suggest that the ore body and associated base metal zonation may have formed by the mixing of oxidized, saline, metal-bearing hydrothermal fluids (<200??C) with reducing, HS-rich pore fluids within radiolarite-rich host rocks. Sphalerite and galena concentrations and base metal sulfide distribution are primarily controlled by the nature of the pore fluids, i.e., the extent and duration of the HS- source. Forward modeling results also predict the distribution of pyrite and quartz in agreement with field observations and indicate a reaction front moving from the initial mixing interface into the radiolarite rocks. Heuristic mass calculations suggest that ore grades and base metal accumulation comparable to those found in the field (18% Zn, 5% Pb) are predicted to be reached after about 0.3 My for initial conditions (30 ppm Zn, 3 ppm Pb; 20% deposition efficiency). ?? Springer-Verlag 2008.

Mineralium Deposita↗

Karst database development in Minnesota: Design and data assembly

The Karst Feature Database (KFD) of Minnesota is a relational GIS-based Database Management System (DBMS). Previous karst feature datasets used inconsistent attributes to describe karst features in different areas of Minnesota. Existing metadata were modified and standardized to represent a comprehensive metadata for all the karst features in Minnesota. Microsoft Access 2000 and ArcView 3.2 were used to develop this working database. Existing county and sub-county karst feature datasets have been assembled into the KFD, which is capable of visualizing and analyzing the entire data set. By November 17 2002, 11,682 karst features were stored in the KFD of Minnesota. Data tables are stored in a Microsoft Access 2000 DBMS and linked to corresponding ArcView applications. The current KFD of Minnesota has been moved from a Windows NT server to a Windows 2000 Citrix server accessible to researchers and planners through networked interfaces. ?? Springer-Verlag 2005.

Environmental Geology↗