Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geologic Notes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2024

Geologic map of the northwest flank of Mauna Loa volcano, Island of Hawai‘i, Hawaii

Mauna Loa, the largest active volcano on Earth, has erupted 34 times since written descriptions became available in A.D. 1832. The most recent eruption of Mauna Loa occurred on November 27, 2022, after a 38 year hiatus; it lasted for 12 days. Some eruptions began with only brief seismic unrest, whereas others followed several months to a year of increased seismicity. Once underway, Mauna Loa’s eruptions can produce lava flows that may reach the sea in less than 24 hours, severing roads and utilities. For example, lava flows that erupted from the Southwest Rift Zone in 1950 advanced at an average rate of 9.3 kilometers per hour (5.8 miles per hour); all three lobes reached the ocean within ~24 hours. Near the eruptive vents, the flows likely traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa has great volcanic-hazard potential for the Island of Hawai‘i. Volcanic hazards on Mauna Loa can be anticipated, and risk substantially mitigated, by documenting its past activity to refine our knowledge of the hazards, and by alerting the public and local government officials of our findings and their implications for hazards assessments and risk. The map of the north and west flanks of Mauna Loa shows the distribution and relation of volcanic and surficial sedimentary deposits. It incorporates previously reported work published as generalized small-scale maps and a more detailed map. Within the mapped area, lava has flowed from three different source regions: the Northeast Rift Zone (22 percent), the summit (64 percent), and radial vents (14 percent). All three have different points of origin which, in turn, affect the flow characteristics and periodicity of activity. The map area includes the uppermost part of the NERZ and extends from the highest elevation––13,040 feet at the south end of the Kokoolau quadrangle, just below the summit caldera––to the sea northwest and west of the summit. Lava that erupts from the north and west flanks typically flows to the west, northwest, or north, depending on the vent location. Both morphologic lava flow types—‘a‘ā and pāhoehoe—are present. Pāhoehoe units tend to spread out or widen in low-slope regions, such as in the saddle regions between Mauna Loa and Mauna Kea or between Mauna Loa and Hualālai. In comparison, ʻaʻā flows generally produce narrower flow lobes that have higher relief. This map is the fifth in a series of five maps that will cover Mauna Loa volcano. NOTE: Map sheet 1 contains lines and type with overprint. This feature may be turned on or off in the Adobe Acrobat page display preferences.

Hawaii↗
USGS2005

Blind comparisons of shear-wave velocities at closely-spaced sites in San Jose, California: Proceedings of a Workshop held at the US Geological Survey, Menlo Park, May 3, 2004

Shear-wave velocities within several hundred meters of Earth's surface are important in specifying earthquake ground motions for engineering design. Not only are the shearwave velocities used in classifying sites for use of modern building codes, but they are also used in site-specific studies of particularly significant structures. Many are the methods for estimating sub-surface shear-wave velocities, but few are the blind comparisons of a number of the methods at a single site. The word "blind" is important here and means that the measurements and interpretations are done completely independent of one another. Stephen Hartzell of the USGS office on Golden, Colorado realized that such an experiment would be very useful for assessing the strengths and weaknesses of the various methods, and he and Jack Boatwright of the USGS office in Menlo Park, California, in cooperation with Carl Wentworth of the Menlo Park USGS office found a convenient site in the city of San Jose, California. The site had good access and space for conducting experiments, and a borehole drilled to several hundred meters by the Santa Clara Valley Water District was made available for downhole logging. Jack Boatwright asked David Boore to coordinate the experiment. In turn, David Boore persuaded several teams to make measurements, helped with the local logistics, collected the results, and organized and conducted an International Workshop in May, 2004. At this meeting the participants in the experiment gathered in Menlo Park to describe their measurements and interpretations, and to see the results of the comparisons of the various methods for the first time. This Open-File Report describes the results of that workshop. One of the participants, Michael Asten, offered to help the coordinator prepare this report. Because of his lead role in pulling the report together, Dr. Asten is the lead author of the paper to follow and is also the lead Compiler for the Open-File Report. It is important to recognize that most of the participants in the experiments contributed at their own expense. It is gratifying that many people recognized the importance of the experiment and were willing to volunteer their time and resources. We thank them for this effort. This Report is organized in three parts: the first part is a paper summarizing the results of the Workshop, and presenting some conclusions regarding the various methods; the second part is a compilation of those documents describing the experiments that were presented at the meeting (a few of the reports have had minor post-meeting revisions, but with only one exception noted later, none of the models were changed). The final part of this Report is a compilation of the presentations from the meeting -- these are largely in the form of Powerpoint files. No attempt has been made by the compilers to edit the material in parts 2 and 3. It is included here as is for the benefit of the reader.

California↗
USGS2000

Transport of suspended and bedload sediment at eight stations in the Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. As part of the investigation, the U.S. Geological Survey designed and implemented a sampling program to assess sediment transport in the Coeur d’Alene River Basin. Suspended and bedload sediments were sampled at four stations at or near base flow and at eight stations during low, moderate, and high discharge conditions between February 1999 and April 2000. The concentrations and loads of suspended and bedload sediment at all stations were directly related to stream discharge. To quantify these relationships, a power function was used to develop sediment-transport curves at all stations. Although the transport curves for most of the stations indicate a good log-log relationship between stream discharge and suspended- and bedload-sediment discharge, there was a fair amount of scatter about the best-fit regression at most stations. For suspended-sediment discharge, the scatter can be primarily attributed to a hysteresis effect in the concentration of suspended sediment as stream discharge rises and falls. The effects of hysteresis on bedload-sediment discharge were difficult to assess because of a paucity of samples collected over the stream hydrograph. At most of the stations, and at the stream discharges sampled, the transport characteristics for fine- and sand-sized suspended sediment were similar. However, at the two main-stem Coeur d’Alene River stations, Rose Lake and Harrison, the suspended-sediment load was primarily composed of fine-grained sediment at stream discharges of less than 15,000 cubic feet per second. These two stations are characterized by relatively slow water velocities, which appear to be insufficient to transport sand-sized sediment at lower stream discharge. At most of the stations, and at the stream discharges sampled, the bedload was primarily composed of material greater than 2 millimeters in diameter, the break between sand and gravel. A predominance of sand-sized bedload was noted at only a few stations, and generally only during low stream discharge. The particle-size distribution of bedload sediment at most stations became proportionately coarser as stream discharge increased. During the peak of snowmelt runoff for water years 1999 and 2000, gravel-sized material between 2 and 64 millimeters in diameter comprised more than 70 percent of the bedload transport at most stations. However, at the station on the Coeur d’Alene River at Rose Lake, the bedload was predominantly composed of fine-grained material of less than 1 millimeter in diameter for all measured stream discharges. The slow water velocities at Rose Lake accounted for the predominance of fine-grained sediment transport.

Idaho↗
USGS2010

Reduced channel conveyance on the Wichita River at Wichita Falls, Texas, 1900-2009

Recent floods on the Wichita River at Wichita Falls, Texas, have reached higher stages compared to historical floods of similar magnitude discharges. The U.S. Geological Survey (USGS) has operated streamflow-gaging station 07312500 Wichita River at Wichita Falls, Tex., since 1938 and flood measurements near the location of the present gage were first made in 1900. Floods recorded in 2007 and 2008 at this gaging station, including the record flood of June 30, 2007, reached higher stages compared to historical floods before 1972 of similar peak discharges. For flood measurements made at stages of more than 18 feet, peak stages were about 1 to 3 feet higher compared to peak stages of similar peak discharges measured before 1972. Flood measurements made at stages of more than 18 feet also indicate a decrease in the measured mean velocity from about 3.5 to about 2.0 feet per second from 1941 to 2008. The increase in stage and decrease in streamflow velocity for similar magnitude floods indicates channel conveyance has decreased over time. A study to investigate the causes of reduced channel conveyance in the Wichita River reach from Loop 11 downstream to River Road in Wichita Falls was done by the USGS in cooperation with the City of Wichita Falls. Historical photographs indicate substantial growth of riparian vegetation downstream from Loop 11 between 1950 and 2009. Aerial photographs taken between 1950 and 2008 also indicate an increase in riparian vegetation. Twenty-five channel cross sections were surveyed by the USGS in this reach in 2009. These cross sections were located at bridge crossings or collocated with channel cross sections previously surveyed in 1986 for use in a floodplain mapping study by the Federal Emergency Management Agency. Four channel cross sections 3,400 to 11,900 feet downstream from Martin Luther King Jr. Boulevard indicate narrowing of the channel. The remaining channel cross sections surveyed in 2009 by the USGS compared favorably with cross sections surveyed in 1986 for the Federal Emergency Management Agency, with no substantial differences noted. Comparison of channel cross sections surveyed in 2009 to those from historic bridge plans indicate no change in cross section has occurred at most of the bridges from Loop 11 downstream to River Road in Wichita Falls, except for obstructions noted at the Scott Avenue bridge and Martin Luther King Jr. bridge. Although obstructions in the channel at these bridges only partially block flow, they could also be contributing to reduced channel conveyance. Step-backwater profiles were used by the USGS to verify channel roughness. The main channel roughness coefficients (Manning's n values) from 2009 surveys were virtually unchanged from those used in a 1991 hydraulic model done for the Federal Emergency Management Agency. The average overbank roughness coefficient (Manning's n value) was 0.15, more than double the value of 0.06 used in the 1991 hydraulic model. Increased overbank vegetation has resulted in higher stages conveying the same amount of discharge, particularly for discharges more than 4,000 cubic feet per second.

Texas↗
USGS1983

Geology and description of thorium and rare-earth deposits in the southern Bear Lodge Mountains, northeastern Wyoming

The Bear Lodge Mountains are a small northerly trending range approximately 16 km northwest of the Black Hills in the northeast corner of Wyoming. Thorium and rare-earth deposits occur over an area of 16 km 2 in the southern part of these mountains. These deposits occur in the core of the Bear Lodge dome in a large multiple intrusive body made up principally of trachyte and phonolite. Two types of deposits are recognized: disseminated deposits and veins. The disseminated deposits are made up of altered igneous rocks cut by numerous crisscrossing veinlets. The disseminated deposits contain thorium and rare-earth minerals in a matrix consisting principally of potassium feldspar, quartz, and iron and manganese oxides. Total rare-earth content of these deposits is about 27 times that of the thorium content. The general size and shape of the disseminated deposits were outlined by making a radiometric map using a scintillation counter of the entire Bear Lodge core, an area of approximately 30 km 2 . The most favorable part of this area, which was outlined by the 40 countJs (count-per-second) isograd on the radiometric map, was sampled in detail. A total of 341 samples were taken over an area of 10.6 km 2 and analyzed for as many as 60 elements. Rare earths and thorium are the principal commodities of interest in these deposits. Total rare-earth content of these samples ranged from 47 to 27,145 ppm (parts per million), and the thorium content from 9.3 to 990 ppm. The amount of total rare earths of individual samples shows little correlation with that of thorium. Contour maps were constructed using the analytical data for total rare earths, thorium, uranium, and potassium. The total rare-earth and thorium maps can be used to define the size of the deposits based on what cut-off grade may be needed during mining. The size is large as the 2,000 ppm total rare-earth isograd encloses several areas that total 3.22 km 2 in size, and the 200 ppm thorium isograd encloses several areas that total 1.69 km 2 . These deposits could be mined by open pit. The Bear Lodge disseminated deposits have one of the largest resources of both total rare earths and thorium in the United States, and although the grade of both commodities is lower than some other deposits, their large size and relative cheapness of mining make them an important future resource. Vein deposits in the Bear Lodge Mountains include all tabular bodies at least 5 cm thick. Twenty-six veins were noted in this area. These veins are thin and short; the longest vein was traced for only 137 m. Minerals vary greatly in the amount present. Gangue minerals are commonly potassium feldspar, quartz, or cristobalite intermixed with varying amounts of limonite, hematite, and various manganese oxides. Rare earths and thorium occur in the minerals monazite, brockite, and bastnaesite. Thorium content of 35 samples ranged from 0.01 to 1.2 percent, and the total rare-earth content of 21 samples from 0.23 to 9.8 percent. Indicated reserves were calculated to a depth of one-third the exposed length of the vein. Inferred reserves lie in a block surrounding indicated reserves. Indicated reserves of all veins are only 50 t of Th0 2 and 1,360 t of total rare-earth oxides; inferred reserves are 250 t of Th0 2 and 6,810 t of total rare-earth oxides. The Bear Lodge dome, which underlies the greater part of this area, is formed by multiple intrusive bodies of Tertiary age that dome up the surrounding sedimentary rocks. In the southern part of the core, the younger intrusive bodies surround and partly replace a granite of Precambrian age. This granite is approximately 2.6 b.y. old. The sedimentary rocks around the core are (from oldest to youngest): Deadwood Formation of Late Cambrian and Early Ordovician age, Whitewood Limestone of Late Ordovician age, Pahasapa Limestone of Early Mississippian age, Minnelusa Sandstone of Pennsylvanian and Early Permian age, Opeche Formation of Permian age, Minnek

Professional Paper↗
USGS2001

Dips, ramps, and rolls- Evidence for paleotopographic and syn-depositional fault control on the Western Kentucky No. 4 coal bed, tradewater formation (Bolsovian) Illinois Basin

The Western Kentucky No. 4 coal is a high-volatile B to high-volatile C bituminous coal that has been heavily mined along the southern margin of the Western Kentucky Coal Field. The seam has a reputation for rolling floor elevation. Elongate trends of floor depressions are referred to as "dips" and "rolls" by miners. Some are relatively narrow and straight to slightly curvilinear in plan view, with generally symmetric to slightly asymmetric cross-sections. Others are broader and asymmetric in section, with sharp dips on one limb and gradual, ramp-like dips on the other. Some limbs change laterally from gradual dip, to sharp dip, to offset of the coal. Lateral changes in the rate of floor elevation dip are often associated with changes in coal thickness, and in underground mines, changes in floor elevation are sometimes associated with roof falls and haulage problems. In order to test if coal thickness changes within floor depressions were associated with changes in palynology, petrography and coal quality, the coal was sampled at a surface mine across a broad. ramp-like depression that showed down-dip coal thickening. Increment samples of coal from a thick (150 cm), down-ramp and thinner (127 cm), up-ramp position at one surface mine correlate well between sample sites (a distance of 60 m) except for a single increment. The anomalous increment (31 cm) in the lower-middle part of the thick coal bed contained 20% more Lycospora orbicula spores. The rolling floor elevations noted in the study mines are inferred to have been formed as a result of pre-peat paleotopographic depressions, syn-depositional faulting, fault-controlled pre-peat paleotopography, and from compaction beneath post-depositional channels and slumps. Although the association of thick coal with linear trends and inferred faults has been used in other basins to infer syn-depositional faulting, changes in palynology within increment samples of the seam along a structural ramp in this study provide subtle evidence of faulting within a specific increment of the coal itself. The sudden increase in L. orbicula (produced by Paralycopodites) in a single increment of a down-ramp sample of the Western Kentucky No. 4 coal records the reestablishment of a rheotrophic mire following a sudden change in edaphic conditions. Paralycopodites was a colonizing lycopod, which in this case became locally abundant after the peat was well established along a fault with obvious growth during peat accumulation. Because many coal-mire plants were susceptible to sudden edaphic changes as might accompany faulting or flooding, changes in palynology would be expected in coals affected by syn-depositional faulting. ?? 2001 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1975

National Cartographic Information Center Newsletter No. 3

Bill Overstreet, this year's president of the American Congress on Surveying and Mapping, wrote us a brief note of guidance after the first issue of the NCIC Newsletter. In it, he cautioned us, among other things, not to get tied down to a strict publishing schedule. "Publish as information becomes available," he advised. Since we had originally planned to print a Newsletter every March, June, September, and December but have actually gone to press in March, September, and now November, we have decided that he has something there. Accordingly we have shifted to a less confining printing schedule of winter, spring, summer, and fall. A little leeway, so to speak, is being built in. An encouraging number of Federal and State agencies, private companies, and individuals have started contributing to the Newsletter. We no longer feel like a soliciting voice in the wilderness. Keep sending in news; any and all cartographically related information will be welcomed for possible publication. If your news did not appear in this issue, rest assured it's in the file for future consideration. Incidentally, by-lines will be appearing on contributions. With this issue we're starting a section that will profile a different cartographic organization each season. The Geography and Map Division of the Library of Congress, its historical background, collections, resources, and services is the first such profile.

Newsletter↗
USGS2013

Prioritization of constituents for national- and regional-scale ambient monitoring of water and sediment in the United States

A total of 2,541 constituents were evaluated and prioritized for national- and regional-scale ambient monitoring of water and sediment in the United States. This prioritization was done by the U.S. Geological Survey (USGS) in preparation for the upcoming third decade (Cycle 3; 2013–23) of the National Water-Quality Assessment (NAWQA) Program. This report provides the methods used to prioritize the constituents and the results of that prioritization. Constituents were prioritized by the NAWQA National Target Analyte Strategy (NTAS) work group on the basis of available information on physical and chemical properties, observed or predicted environmental occurrence and fate, and observed or anticipated adverse effects on human health or aquatic life. Constituents were evaluated within constituent groups that were determined on the basis of physical or chemical properties or on uses or sources. Some constituents were evaluated within more than one constituent group. Although comparable objectives were used in the prioritization of constituents within the different constituent groups, differences in the availability of information accessed for each constituent group led to the development of separate prioritization approaches adapted to each constituent group to make best use of available resources. Constituents were assigned to one of three prioritization tiers: Tier 1, those having the highest priority for inclusion in ambient monitoring of water or sediment on a national or regional scale (including NAWQA Cycle 3 monitoring) on the basis of their likelihood of environmental occurrence in ambient water or sediment, or likelihood of effects on human health or aquatic life; Tier 2, those having intermediate priority for monitoring on the basis of their lower likelihood of environmental occurrence or lower likelihood of effects on human health or aquatic life; and Tier 3, those having low or no priority for monitoring on the basis of evidence of nonoccurrence or lack of effects on human health or aquatic life, or of having insufficient evidence of potential occurrence or effects to justify placement into Tier 2. Of the 1,081 constituents determined to be of highest priority for ambient monitoring (Tier 1), 602 were identified for water and 686 were identified for sediment (note that some constituents were evaluated for both water and sediment). These constituents included various types of organic compounds, trace elements and other inorganic constituents, and radionuclides. Some of these constituents are difficult to analyze, whereas others are mixtures, isomers, congeners, salts, and acids of other constituents; therefore, modifications to the list of high-priority constituents for ambient monitoring could be made on the basis of the availability of suitable methods for preparation, extraction, or analysis. An additional 1,460 constituents were placed into Tiers 2 or 3 for water or sediment, including some constituents that had been placed into Tier 1 for a different matrix; 436 constituents were placed into Tier 2 for water and 246 constituents into Tier 2 for sediment; 979 constituents were placed into Tier 3 for water and 779 constituents into Tier 3 for sediment.

Scientific Investigations Report↗
USGS2002

Color-coded contour map of Mars M 25M RKN

NOTES ON BASE This map is based on data from the Mars Orbiter Laser Altimeter (MOLA) (Smith and others, 2001), an instrument on NASA's Mars Global Surveyor (MGS) spacecraft (Albee and others, 2001). The image used for the base of this map represents more than 600 million measurements gathered between 1999 and 2001, adjusted for consistency (Neumann and others, 2001, 2002) and converted to planetary radii. These have been converted to elevations above the areoid as determined from a martian gravity field solution GMM2 (Lemoine and others, 2001), truncated to degree and order 50, and oriented according to current standards (see below). The average accuracy of each point is originally ~100 meters in horizontal position, and ~1 meter in radius (Neumann, 2001). However, the total elevation uncertainty is at least +3 m due to the global error in the areoid (+1.8 meters according to Lemoine and others, 2001) and regional uncertainties in its shape (communication from Neumann, 2002). The measurements were converted into a digital elevation model (DEM) (communication from Neumann, 2002; Neumann and others, 2001; Smith and others, 2001) using Generic Mapping Tools software (Wessel and Smith, 1998), with a resolution of 0.015625 degrees per pixel or 64 pixels per degree. In projection, the pixels are 926.17 meters in size at the equator. PROJECTION The Mercator projection is used between latitudes +57°, with a central meridian at 0° and latitude equal to the nominal scale at 0°. The Polar Stereographic projection is used for the polar regions north of the +55° parallel and south of the –55° parallel with a central meridian set for both at 0°. The adopted equatorial radius is 3,396.19 km (Duxbury and others 2002; Seidelmann and others 2002). COORDINATE SYSTEM The MOLA data were initially referenced to an internally consistent inertial coordinate system, derived from tracking of the MGS spacecraft. By adopting appropriate values for the orientation of Mars as defined by the International Astronomical Union (IAU) and the International Association of Geodesy (IAG) (Seidelmann and others, 2002), these inertial coordinates were converted into the planet-fixed coordinates (longitude and latitude) used on this map. These values include the orientation of the north pole of Mars (including the effects of precession), the rotation rate of Mars, and a value for W0 of 176.630°, where W0 is the angle along the equator to the east, between the 0° meridian and the equator's intersection with the celestial equator at the standard epoch J2000.0 (Seidelmann and others, 2002). This value of W0 was chosen (Duxbury and others, 2002) in order to place the 0° meridian through the center of the small (~500 m) crater Airy-0, located in the crater Airy (de Vaucouleurs and others, 1973; Seidelmann and others, 2002). Longitude increases to the east, and latitude is planetocentric as allowed by IAU/IAG standards (Seidelmann and others, 2002) and in accordance with current NASA and USGS standards (Duxbury and others, 2002). A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards (Seidelmann and others, 2002) and has also been used for Mars. The figure adopted to compute this secondary grid is an oblate spheroid with an equatorial radius of 3,396.19 km and a polar radius of 3,376.2 km (Duxbury and others, 2002; Seidelmann and others, 2002). MAPPING TECHNIQUES To create the topographic base image, the original DEM produced by the MOLA team in Simple Cylindrical projection with a resolution of 64 pixels per degree was projected into the Mercator and Polar Stereographic pieces. A shaded relief was generated from each DEM with a sun angle of 30° from horizontal and a sun azimuth of 270°, as measured clockwise from north, and a vertical exaggeration of 100%. Illumination is from the west, which follows a long-standing USGS tradition for planetary maps. This allows for continuity in the shading between maps and quadrangles, and most closely resembles lighting conditions found on imagery. The DEM values were then mapped to a smooth global color look-up table. Note that the chosen color scheme simply represents elevation changes and is not intended to imply anything about surface characteristics (e.g., past or current presence of water or ice). These two files were then merged and scaled to 1:25 million for the Mercator portion and 1:15,196,708 for the two Polar Stereographic portions, with a resolution of 300 dots per inch. The projections have a common scale of 1:13,923,113 at +56° latitude. Contours were created from the DEM at a 1-kilometer interval. Contours for features with a diameter of 3 km or less (features too small for this map scale) were removed. The contours were then simplified by removing points along the contours spaced less than 1 km apart. NOMENCLATURE Names on this sheet are approved by the IAU and have been applied for features clearly visible at the scale of this map. For a complete list of the IAU-approved nomenclature for Mars, see the Gazetteer of Planetary Nomenclature at http://planetarynames.wr.usgs.gov/. Font color was chosen for readability. Names followed by an asterisk are provisionally approved. M 25M RKN: Abbreviation for Mars, 1:25,000,000 series, shaded relief (R), with color (K) and nomenclature (N) (Greeley and Batson, 1990).

Open-File Report↗
USGS1978

Iron in water near wastewater lagoons in Yellowstone National Park, Wyoming

High dissolved-iron concentrations have been noted in water in wells used to monitor effluent that percolates from wastewater disposal lagoons near Old Faithful in Yellowstone National Park. The concentration of dissolved iron in water in a well increased from 80 μ g/L (micrograms per liter) before a nearby lagoon was .used for disposal of effluent to 17000 μ g/L after the lagoon was used. The effluent contained 180 μ g/L of dissolved iron, and nearby Iron Spring Creek contained 30 μ g/L or less of dissolved iron above and below the lagoons. Organic carbon, nitrogen, and sulfur in the effluent as methane, ammonia, and hydrogen sulfide are oxidized to carbon dioxide, nitrate, and sulfate, respectively, in the unsaturated zone and possibly in the saturated zone as ground water moves through sand and gravel toward Iron Spring Creek. This oxidation results in simultaneous reduction of iron in the sand and gravel from the insoluble ferric phase to the soluble ferrous phase. As ground water high in dissolved iron discharges at land surface near the stream, oxygen from the atmosphere oxidizes the iron back to the insoluble ferric phase, and ferric hydroxide precipitates. Ferric hydroxide also precipitates in some of the monitoring wells. Iron bacteria and other organisms are associated with the precipitates.

Wyoming↗
USGS1978

Recognition of oxidized sulfide minerals as an exploration guide for uranium

The difference in color between tan to red oxidized sandstone and gray reduced sandstone on either side of the reduction-oxidation (redox) interface, which is- the locus of uranium concentration in roll-type deposits, has been noted and used locally as an exploration guide within known uranium districts. Reduced sandstone is characterized in many deposits by the presence of iron sulflde minerals (particularly marcasite and pyrite) that occur as replacements of and overgrowths on iron-titanium oxide minerals and plant debris and as cement of detrital grains. Oxidation of the sulfldes by oxygenated ground water forms yellow to red ferric oxide and ferric hydroxide phases ("limonite") that replace the FeS 2 minerals. Processes other than the oxidation of sulfldes, however, can cause reddening of clastic sediments without the creation of a redox boundary, and so color alone is not a sufficient condition by which to judge the potential for uranium ore in frontier areas. Ferric oxides that form by the oxidation of iron sulflde minerals can be distinguished from other forms of ferric oxide by reflection microscopic examination of polished grain mounts- and polished thin sections'. Diagnostic features of oxidized sulfldes are limonite pseudomorphs of sulfldes and limonite containing internal textures that mimic characteristic textures of previously sulfldized detrital phases. Recognition of oxidized sulfides by reflection microscopy, then, can distinguish oxidized sandstones, which might have a redox boundary downdip and which would therefore be favorable hosts for uranium concentration, from those without such potential.

Journal of Research of the U.S. Geological Survey↗
USGS1994

Selected contributions to ground-water hydrology by C.V. Theis, and a review of his life and work

This publication highlights two previously unpublished papers by C.V. Theis; each is augmented with a discussion that explains why he wrote the paper, attempts to discern why he did not publish the paper, and amplifies the information with reference material not included by Theis. 'A Primer on Anisotropy' was written in the early 1970's to provide practicing hydrogeologists of the day with a method of analyzing ground-water problems involving anisotropic hydraulic-conductivity distribution without using tensor mathematics. The equations were developed for horizontal flow through dipping beds with differing conductivities parallel and perpendicular to the bedding and for flow through dipping beds having three different hydraulic conductivities, one perpendicular to the bedding and two others parallel to the bedding, at an angle to the strike of the beds. Although most colleagues who reviewed the primer in the early 1970's encouraged its publication enthusiastically, at least one suggested the addition of some examples in which the method would be demonstrated. Handwritten notes from Theis' files indicate that he may have worked on some examples and possibly other additions to the paper. The comments by Charles A. Appel include some examples of the primer's use and augment the presentation with references to relevant published papers, both those available to Theis but not cited by him, and subsequent publications. 'Aquifers, Ground-Water Bodies, and Hydrophers' was written in the early 1980's as an attempt to clarify the semantic and conceptual confusion in the use of the term aquifer, applied by some investigators to the saturated part of a permeable formation and by others to the entire permeable formation. The physical distinction between the aquifer and the ground-water body is emphasized, and the term hydropher is proposed to describe the saturated part of a permeable formation. Theis' interest in and familiarity with the French literature on ground water was the basis for a discussion of the French usage, which eschews the term aquifer. The analysis and critique of Theis' palzler explains the 1835 paper from which aquifer was reportedly derived, and provides further justification for the term hydropher. Theis' more important contributions to ground-water hydrology were outgrowths of his solutions to small local water problems based on field investigations. The biographical sketch, drawing extensively from a partial autobiography that Theis had dictated, reveals both the reasons for and the intellectual processes that led to his development of the nonequilibrium concept of ground-water hydraulics. The sketch also describes the background of the man, reviews his career, and portrays the admiration and respect he elicited from his colleagues and associates. The magnitude of Theis' contribution to the science of ground-water hydrology, to the appraisal of the water resources of New Mexico, and to the early research on ground disposal of radioactive wastes is evident from the bibliography of his writings, which includes 168 reports, many of them unpublished. The evolution of his thinking about the role of geologic inhomogeneities in mass transport, conceptualized but not quantified, was the major contribution of the latter part of his career.

Water Supply Paper↗
USGS1951

Notes on the manganese ores of Brazil

Brazil has been a small but consistent source of manganese ore for world markets during the last five decades. Production both for export and for domestic use is likely to increase. Deposits can be classified into syngenetic (the primary manganese sediments in iron formation at Urucum) and epigenetic. The epigenetic deposits can be further subdivided into four classes: (a) The Queluz or Morro da Mina type, in which the manganese oxide ore has been derived by weathering processes from a manganese silicate-carbonate-sulfide protore. (b) The Lagoa Grande type, enclosed in itabirite, in which lean man-ganiferous horizons in the metamorphosed iron formation have been leached and the manganese concentrated by weathering processes. (c) Deposits in slightly manganiferous rocks of various types in which the manganese has been concentrated by weathering processes. (d) Deposits in barren rocks into which manganese oxides have been introduced from unknown sources. It is probable that the Lagoa Grande type is closely related in ultimate origin to the Urucum type, although the regional metamorphism suffered by the former obscures relations. The Urucum deposits and two deposits of the Morro da Mina type have large reserves of export-grade ore. Many deposits of the Lagoa Grande type are known and the aggregate reserves are large, although their grade makes them more suitable for domestic than for export use. Deposits of the other two types are numerous but small, and their grade seems to consign most ore from these deposits to the domestic market. © 1951 Society of Economic Geologists, Inc.

Economic Geology↗
USGS2011

Summary of November 2010 meeting to evaluate turbidite data for constraining the recurrence parameters of great Cascadia earthquakes for the update of national seismic hazard maps

This report summarizes a meeting of geologists, marine sedimentologists, geophysicists, and seismologists that was held on November 18–19, 2010 at Oregon State University in Corvallis, Oregon. The overall goal of the meeting was to evaluate observations of turbidite deposits to provide constraints on the recurrence time and rupture extent of great Cascadia subduction zone (CSZ) earthquakes for the next update of the U.S. national seismic hazard maps (NSHM). The meeting was convened at Oregon State University because this is the major center for collecting and evaluating turbidite evidence of great Cascadia earthquakes by Chris Goldfinger and his colleagues. We especially wanted the participants to see some of the numerous deep sea cores this group has collected that contain the turbidite deposits. Great earthquakes on the CSZ pose a major tsunami, ground-shaking, and ground-failure hazard to the Pacific Northwest. Figure 1 shows a map of the Pacific Northwest with a model for the rupture zone of a moment magnitude M w 9.0 earthquake on the CSZ and the ground shaking intensity (in ShakeMap format) expected from such an earthquake, based on empirical ground-motion prediction equations. The damaging effects of such an earthquake would occur over a wide swath of the Pacific Northwest and an accompanying tsunami would likely cause devastation along the Pacifc Northwest coast and possibly cause damage and loss of life in other areas of the Pacific. A magnitude 8 earthquake on the CSZ would cause damaging ground shaking and ground failure over a substantial area and could also generate a destructive tsunami. The recent tragic occurrence of the 2011 M w 9.0 Tohoku-Oki, Japan, earthquake highlights the importance of having accurate estimates of the recurrence times and magnitudes of great earthquakes on subduction zones. For the U.S. national seismic hazard maps, estimating the hazard from the Cascadia subduction zone has been based on coastal paleoseismic evidence of great earthquakes over the past 5,000 years. The instrumental catalog of earthquakes is of little use for constraining the hazard of the CSZ, because there are virtually no recorded earthquakes on most of the plate interface of the CSZ. There are no historical accounts in the past 150 years of large earthquakes on most of the CSZ. Until about 20 years ago, some interpreted this lack of recent and historical earthquakes as an indicator that the subduction zone was slipping aseismically and could not produce a great earthquake. The work of Brian Atwater and others, in the late 1980s and the 1990s (Atwater, 1987, 1992; Atwater and others, 1995; Nelson and others, 1996; Clague, 1997; Atwater and Hemphill-Haley, 1997; Atwater and others, 2004) demonstrated that submerged forests, buried soils, tsunami deposits, and liquefaction along and near the coast were compelling evidence of repeated great Cascadia earthquakes over at least the past 5,000 years. Atwater and Hemphill-Haley (1997) concluded from paleoseismic evidence at Willapa Bay, Washington, that great earthquakes ruptured the CSZ with an average recurrence time of about 500 years. The date of the last great CSZ earthquake, January 26, 1700, was established from historical records of the so-called orphan tsunami in Japan that is inferred to have been produced by this earthquake (Satake and others, 1996, 2003; Atwater and others, 2005) and is consistent with tree-ring data from drowned forests in Washington and Oregon. From modeling the observations of the tsunami, Satake and others (2003) estimated a moment magnitude of about 9.0 for this earthquake. Many other paleoseismic sites have been investigated along the Pacific Northwest coast from Vancouver Island to northern California and show evidence of great CSZ earthquakes. Nelson and others (2006) summarized the dates found from these studies and proposed correlations between sites indicating the extent of rupture for individual events. Dating of inferred tsunami deposits in Bradley Lake, Oregon by Kelsey and others (2005), as well as tsunami and subsidence evidence from Six Rivers, Oregon (Kelsey and others, 2002) and Coquille River (Witter and others, 2003), indicates that there were probably M w 8 ruptures in the southern portion of the CSZ in addition to the M w 9 events that rupture the whole length of the CSZ (Nelson and others, 2006). A parallel development over the past 20 years or more is the use of deep-sea turbidite deposits for identifying and dating great Cascadia earthquakes over the past 10,000 years (Adams, 1990; Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Turbidites are sediment deposits in the deep ocean from turbidity currents, which are energetic flows of sediment and water along the continental shelf and slope. Adams (1990), using the counts of turbidites in deep-sea cores off the coast of Oregon and Washington collected and analyzed by Griggs (1969) and Griggs and others (1969), proposed that these turbidites were caused by the shaking of great Cascadia earthquakes. Part of his reasoning was that the number (13) of turbidite deposits that occurred since deposition of the Mazama Ash 7,000 years ago gave a recurrence time of about 500 years, consistent with that derived from the coastal submergence data. Adams (1990) also proposed the “confluence test” which evaluates the number of turbidites for submarine channels that form a confluence. He reported that the number of turbidites in the single downstream channel equaled the number in each of the tributary channels. He reasoned that this indicated that the turbidites in each tributary were simultaneously triggered and were, therefore, caused by a common forcing agent. He concluded that shaking from extended ruptures of great Cascadia earthquakes was the most likely cause of these turbidites. Based on the paleoseismic evidence of past great earthquakes, the hazard from the Cascadia subduction zone was included in the 1996 U.S. NSHM (Frankel and others, 1996), which were the basis for seismic provisions in the 2000 International Building Code. These hazard maps used the paleoseismic studies to constrain the recurrence rate of great CSZ earthquakes. Goldfinger and his colleagues have since collected many more deep ocean cores and done extensive analysis on the turbidite deposits that they identified in the cores (Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Using their dating of the sediments and correlation of features in the logs of density and magnetic susceptibility between cores, they developed a detailed chronology of great earthquakes along the CSZ for the past 10,000 years (Goldfinger and others, in press). These correlations consist of attempting to match the peaks and valleys in logs of density and magnetic susceptibility between cores separated, in some cases, by hundreds of kilometers. Based on this work, Goldfinger and others (2003, 2008, in press) proposed that the turbidite evidence indicated the occurrence of great earthquakes (M w 8) that only ruptured the southern portion of the CSZ, as well as earthquakes with about M w 9 that ruptured the entire length of the CSZ. For the southernmost portion of the CSZ, Goldfinger and others (in press) proposed a recurrence time of M w 8 or larger earthquakes of about 230 years. This proposed recurrence time was shorter than the 500 year time that was incorporated in one scenario in the NSHM’s. It is important to note that the hazard maps of 1996 and later also included a scenario or set of scenarios with a shorter recurrence time for M w 8 earthquakes, using rupture zones that are distributed along the length of the CSZ (Frankel and others, 1996; Petersen and others, 2008). Originally, this scenario was meant to correspond to the idea that some of the 500-year averaged ruptures seen in the paleoseismic evidence could have been a series of M w 8 earthquakes that occurred over a short period of time (a few decades), rather than M w 9 earthquakes. Figure 2 shows the logic tree for the CSZ used in the 2008 NSHM’s (Petersen and others, 2008). This logic tree includes whole CSZ rupture earthquakes (M w 8.8–9.2) and partial CSZ rupture earthquakes (M w 8.0–8.7). In this latest version of the NSHM’s, the effective recurrence time of earthquakes on the CSZ with moment magnitudes greater than or equal to 8.0 over the various models is about 270 years (Petersen and others, 2008). This recurrence time applies to the entire CSZ, so that the hazard from great earthquakes was approximately equal along the whole zone, although the hazard estimates taper on the northern and southern ends of the CSZ, because of the way rupture zones of M w 8 earthquakes were distributed along the strike of the CSZ. The NSHM will be updated in 2013, as part of the standard update cycle that corresponds to the update cycle of the national model building codes that are based on the seismic hazard maps. A meeting was necessary to assemble a wide group of experts to hear Dr. Goldfinger explain his methodology for dating and correlating the turbidites and for developing the earthquake chronology. The overall goal of the workshop was to evaluate observations of turbidite deposits to provide constraints on the recurrence times and rupture extents of great Cascadia subduction zone earthquakes for the next update of the NSHM. Before the meeting, participants were supplied with the U.S. Geological Survey (USGS) Professional Paper of Goldfinger and others (in press), as well as material from Brian Atwater and Alan Nelson. The agenda of the meeting was developed by Art Frankel, with assistance from Chris Goldfinger, Brian Atwater, Alan Nelson, Mark Petersen, and Craig Weaver. The meeting was hosted by Chris Goldfinger of Oregon State University. We stress that it is difficult to evaluate in a two-day meeting the large amount of work that Goldfinger and his colleagues have done over the past 15 years or more. This meeting is the first step in a process that develops the inputs to the update of the national maps. The conclusions of this workshop will be discussed and possibly modified at the regional Pacific Northwest workshop for the hazard maps to be held in early 2012. Vetting new research results using informed expert opinion is an integral part of updating the national maps and does not reflect on the veracity of these results.

Cascadia↗
USGS1991

Factors affecting the recognition of faults exposed in exploratory trenches

Trenching-a widely used method for evaluating fault activity-has limitations that can mislead investigators. Some segments of fault strands in trench walls may not be visible, and this nonvisibility can lead to incorrect interpretations of time of most recent displacement and recurrence intervals on a fault. We examined the logs of 163 trench exposures and tabulated data on more than 1,200 fault strands to investigate three categories of nonvisibility: (1) strands with obscure (invisible or poorly visible) segments, (2) strands that die out upward, and (3) strands that die out downward. About 14 percent of all the strands have obscure segments. Of the 143 strands on which it is possible to recognize dieout up (limited to strands for which position of ground surface at time of faulting is known), 45 percent do die out upward, and the fraction exceeds 70 percent for strike-slip and reverse faults. Thus a fault strand overlain by an apparently undisturbed deposit is not necessarily older than the deposit. More than 30 percent of all the strands die out downward, providing more evidence that fault strands can end for reasons other than being covered by deposits younger than the fault. Analysis of trench-log data revealed various relations between geologic factors and nonvisibility of fault strands. For example, fault type affects the incidence of nonvisibility, which is generally most common on strike-slip faults, less common on reverse faults, and least common on normal fau Its. The type of material penetrated by the fault also influences nonvisibility, which tends to be more common in soil horizons and sand, and less common in gravel. Dieout down is weakly influenced by fault displacement, decreasing in frequency with increase in displacement; the frequencies of obscure segments and dieout up do not vary consistently with fault displacement. Frequency of obscure segments generally decreases with increase in length of obscure segments, and frequency of dieout up generally decreases with depth of dieout up. Length of obscure segments and depth of dieout up are typically less than the effective thickness of associated beds. On the basis of few data, obscure segments seem to be more common on faults with younger, rather than older, ages of latest displacement. Our study revealed additional relations not directly related to nonvisibility. For example, the median widths of faults crossed by the trenches vary by fault type, strike-slip faults being narrower than dip-slip faults. In the shallow and mostly unconsolidated materials cut by the trenches, fault widths show only an erratic and, at best, weak relationship to fault displacements. Hanging walls are deformed more frequently than footwalls in dip-slip faults, but both walls are deformed at more than 30 percent of the exposures. We tabulated several phenomena that may indicate faulting or provide evidence of prehistorical earthquakes. Rotation of pebbles was identified in 41 percent of the exposures having gravel in the fault zone; type of fault has no strong influence on the incidence of pebble rotation. Fissures were recorded at 52 percent of the exposures and were more common in strike-slip and normal faults than in reverse fau Its. Gouge was reported at 1 5 percent of the exposures; fault type has no significant influence on its frequency. Slickensides were noted at 10 percent of the exposures, and fault type has an unknown influence on their incidence. Slickensides in unconsolidated materials were restricted to clay, silt, and gouge. Other mechanical or hydrologic effects related to faulting or earthquakesrubble, breccia, mixing, crushing, polishing, water barriers, c;ind probable liquefaction effects-were reported at fewer than 1 0 percent of the exposures.

Bulletin↗
USGS2019

Climate, streamflow, and lake-level trends in the Great Lakes Basin of the United States and Canada, water years 1960–2015

Water levels in the Great Lakes fluctuate substantially because of complex interactions among inputs (precipitation and streamflow), outputs (evaporation and outflow), and other factors. This report by the U.S. Geological Survey in cooperation with the Great Lakes Restoration Initiative was completed to describe trends in climate, streamflow, lake levels, and major water-budget components within the Great Lakes Basin for water years (WYs) 1960–2015 (study period). Resulting trends are applicable only to the study period and should not be considered indicative of longer-term trends. Analyses of climate trends used monthly data from the Parameter-elevation Regressions on Independent Slopes Model, which are available only for the United States. Trend tests were completed for annual and seasonal time series of monthly means for total precipitation, daily minimum air temperature ( T min ), and daily maximum air temperature ( T max ). Statistical significance for all time-trend tests (climate, streamflow, and lake levels) was determined using the Mann‑Kendall test for probability values less than or equal to 0.10. Trend analyses were completed without adjustments for serial correlation; however, a modified Mann-Kendall test was subsequently used to examine potential effects of short-term persistence in time-series data. Effects of short-term persistence were considered inconsequential for climate data and minor for streamflow data; however, the presence of short-term persistence in water-budget components had more substantial effects on trend analyses. Spatial distributions of trends in climatic data for WYs 1960–2015 for the U.S. part of the Great Lakes Basin (land only) indicate (1) generally ubiquitous upward trends in T min and (2) a sharp transition from neutral or downward trends in precipitation northwest of Lake Michigan to generally upward trends east of Lake Michigan. Trends in T max were not statistically significant. Analyses of annual climatic data aggregated for the U.S. land part of the Great Lakes Basin indicated statistically significant upward trends for precipitation and T min , and similar statistically significant trends existed for all the individual lake subbasins except Lake Superior. Of 103 U.S. Geological Survey streamgages analyzed for streamflow trends, 71 had significant annual trends (54 upward and 17 downward). Downward trends in annual streamflow are concentrated northwest of Lake Michigan (16 streamgages), and upward trends are concentrated east of Lake Michigan (53 streamgages). Of the 71 streamgages with significant annual trends, 70 had at least one season with a significant trend that matched the annual trend direction. Of 35 Environment and Climate Change Canada streamgages analyzed, 22 had significant upward trends in annual streamflow, and all but 1 of these 22 had at least one season with a significant upward trend. None of the Environment and Climate Change Canada streamgages had significant downward annual trends, and only one had a significant downward seasonal trend. Trends in lake levels and several major water-budget components affecting lake levels were analyzed for the study period. Significant downward trends in lake level and outflow for Lake Superior are driven primarily by low lake levels and outflows during WYs 1998–2014. A significant downward trend in runoff from the contributing drainage area also is indicated, which is consistent with numerous streamgages northwest of Lake Michigan with significant downward trends in annual streamflow. A significant upward trend in annual overlake evaporation also is indicated, which is consistent with the spatially distributed upward trends in annual T min . The sum of overlake precipitation and runoff from the contributing drainage area for each of the Great Lakes, less overlake evaporation, composes a variable called net basin supply (NBS). A significant downward trend in NBS is indicated for Lake Superior, which is consistent with significant trends for individual components of runoff (downward) and evaporation (upward) that contributed to a significant downward trend for lake outflow. Statistically significant upward trends in NBS for Lake Saint Clair and Lake Ontario offset the downward trend for Lake Superior and combine with nonsignificant upward trends in NBS for Lakes Michigan and Huron and Lake Erie to produce a neutral trend in NBS for the basin. A predictable pattern in monthly mean lake levels is noted for Lake Superior, with the minimum for each year usually during or near March and the maximum commonly during or near September or October. When an October lake level is in a period of substantial decline, potential for an ensuing short-term period of below-mean lake levels is enhanced. Downstream from Lake Superior, monthly lake levels have sawtooth patterns that somewhat resemble those for Lake Superior but with decreased predictability in timing. Similar to Lake Superior, Lakes Michigan and Huron, Lake Saint Clair, and Lake Erie all have a prolonged period of low lake levels around WYs 1998–2014; however, a significant downward trend is indicated only for Lakes Michigan and Huron. All these lakes also have a period of low lake levels before about WY 1968, when minimum lake levels were lower than during WYs 1998–2014. The significant downward trend of outflow from Lake Superior is carried downstream into Lakes Michigan and Huron; however, trends in outflow from the next three lakes downstream (Lakes Saint Clair, Erie, and Ontario) are offset by increased precipitation and runoff and are not significant.

Scientific Investigations Report↗
USGS2015

Geomorphology and flood-plain vegetation of the Sprague and lower Sycan Rivers, Klamath Basin, Oregon

This study provides information on channel and flood-plain processes and historical trends to guide effective restoration and monitoring strategies for the Sprague River Basin, a primary tributary (via the lower Williamson River) of Upper Klamath Lake, Oregon. The study area covered the lower, alluvial segments of the Sprague River system, including the lower parts of the Sycan River, North Fork Sprague River, South Fork Sprague River, and the entire main-stem Sprague River between the confluence of the North Fork Sprague and the South Fork Sprague Rivers and its confluence with the Williamson River at Chiloquin, Oregon. The study included mapping and stratigraphic analysis of flood-plain deposits and flanking features; evaluation of historical records, maps and photographs; mapping and analysis of flood-plain and channel characteristics (including morphologic and vegetation conditions); and a 2006 survey of depositional features left by high flows during the winter and spring of 2005–06. Analyses focused on the channel and flood plain within an area defined as the “geomorphic flood plain,” an area encompassing active fluvial and riparian processes. The geomorphic flood plain was subdivided into 13 valley segments of distinct fluvial environments on the basis of valley form and major tributary junctions: nine segments span the 136.1 kilometers of main-stem Sprague River, two segments for the lower Sycan River, and one segment for each part of the South Fork Sprague and North Fork Sprague Rivers within the study area. Segment characteristics range from steep and narrow canyons to low-gradient reaches with expansive flood plains. The wide flood-plain valley segments are broadly similar; most contain a sinuous, low-gradient channel that migrates slowly across the valley bottom. The narrow valley segments include the steep, boulder-and-cobble-bed reaches at downstream and upstream ends of the study area as well as other confined valley segments that have similar gradients and substrates as adjacent unconfined valley segments, but much lower sinuosities. Although the geologic setting of the expansive South Fork valley segment resulted in historical conditions of sinuous and poorly defined channels and wet meadows, flanking levees now narrowly confine the channelized South Fork Sprague River for much of its length. Stratigraphic analyses show that before the Mazama eruption of 7,700 calendar years before present, wetlands and low flood plains flanked the main rivers of the study area. The eruption, however, covered much of the northern basin with sand- and granule-size pumice clasts, transforming channels by increasing bed-material transport and promoting bar formation and channel migration, particularly for the Sycan and North Fork Sprague Rivers, and for the Sprague River downstream of the Sycan River confluence. The South Fork Sprague River, which had much less Mazama pumice deposited in its watershed, remained a wet-meadow fluvial system until historical channelization and diking. The analysis of historical maps and aerial photographs covering the geomorphic flood plain show changes in sinuosity, migration rates, and vegetation conditions since the 1800s. Most quantitative information is for the period between 1940 and 2000. The decrease in sinuosity since 1940 for nearly all the unconfined reaches resulted partly from decreased migration rates, but mostly from several cutoffs and avulsions formed between 1940 and 1975. The river shortening and steepening possibly resulted from (1) flood-plain confinement by levees, dikes, roads, and railroads leading to deeper and faster overbank flow, thereby promoting erosion of new flood-plain channels; and (2) flood-plain disturbances such as trails, ditches, and vegetation manipulation or eradication that locally concentrated overbank flow and decreased surface resistance to channel erosion. The most evident vegetation change has been the loss of short woody vegetation adjacent to the river channels: only one-half the near-channel area covered by short woody vegetation in 1940 was similarly covered in 2000. Woody vegetation removal in the 1950s and 1960s and continuing grazing and trampling by livestock probably are the main reasons for the decrease in short woody vegetation from the dense riparian corridors of willows ( Salix sp.) and other riparian shrubs noted in the early 20th century. The alluvial corridor of the South Fork Sprague River, compared to other Sprague River Basin rivers, has been the most substantially transformed since first historical observations. The present channel is incised, straightened, and separated from the rarely inundated flood plain by levees. Despite these effects of human disturbances, many of the fundamental physical processes forming the Sprague River fluvial systems over the last several thousand years still function. In particular, flows are unregulated, sediment transport processes are active, and overbank flooding allows for floodplain deposition and erosion. Therefore, restoration of many of the native physical conditions and processes is possible without substantial physical manipulation of current conditions for much of the Sprague River study area. An exception is the South Fork Sprague River, where historical trends are not likely to reverse until it attains a more natural channel and flood-plain geometry and the channel aggrades to the extent that overbank flow becomes common.

Oregon↗
USGS1997

Environmental geochemistry and sediment quality in Lake Pontchartrain: database development and review

This paper reports on preliminary results of a project to develop a comprehensive data base of chemical and environmental information on sediments from Lake Pontchartrain, Louisiana, and surrounding water bodies. The goal is to evaluate all data for reliability and comparability, and to make it widely accessible and useful to all users. Methods for processing heterogeneous, historical data follow previous methods employed in the Boston Harbor and Massachusetts Bay area. Data from 11 different data sets, encompassing about 900 total samples, have been entered to date. Questionable or anomalous data were noted in a minority of cases. Problems tend to follow distinct patterns and are relatively easy to identify. Hence, comparability of data has not proven to be the major obstacle to synthesis efforts that was anticipated in earlier years (NRC, 1989). Quality-controlled data sets show that the bulk of sediment samples in the more central parts of Lake Pontchartrain have values within normal background for heavy metals like Cu, Pb, and Zn. The same or lower concentrations were found in the vicinity of the Bonnet Carre Spillway, representing influx from the Mississippi River. Mean concentrations for Cu, Pb, and Zn were 17, 21, and 74 µg/g (total dissolution analyses), respectively. However, values as high as 267 µg/g Pb and comparable increases for other metal and organic contaminants are found in sediments within 2 km of the coastal strip of New Orleans. Additional sampling in such areas and in other inland coastal waterways is needed, since such levels are above the threshold for potential toxic effects on benthic organisms, according to effects-based screening criteria. The most contaminated sites, Bayou Trepagnier and Bayou Bonfouca, involve industrial areas where waste discharge has now been controlled or remediated, but where sediments may retain large concentrations of contaminants, e.g. tenths of a percent of Pb, Cr, and Zn or more for Bayou Trepagnier.

Louisiana↗