Geology ReportsSearch

SEARCH · Geology Reports

Results for “Earth System Science Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,193 records · Page 34Linked to original sources

Precipitation-based flood-inundation maps for the East Fork Little Blue River and tributaries at Lee’s Summit, Missouri, 2024

The U.S. Geological Survey, in cooperation with the City of Lee’s Summit, Missouri, assessed flooding of the East Fork Little Blue River and tributaries for varying precipitation magnitudes and durations, varying antecedent runoff conditions, and projected climate-change conditions. The precipitation scenarios were used to develop a library of flood-inundation maps for a 2.95-mile reach of the East Fork Little Blue River and tributaries within the city. A two-dimensional U.S. Army Corps of Engineers Hydrologic Engineering Center–River Analysis System (HEC–RAS; ver. 6.5) rain-on-grid model was calibrated to selected runoff events representing a range of antecedent runoff conditions and hydrologic responses. Lowest adjacent grades for structures within the nearby study area were incorporated into the terrain, and depth grids and water-surface elevation grids were developed for the study area. Simulated velocities at selected bridge locations were also developed from the model. The model was calibrated using water-surface elevation data collected from water-level loggers (pressure transducers) and streamflow measurements and water-surface elevation measurements made at a reference point during runoff events. The calibrated HEC–RAS model was used to simulate streamflows from design rainfall events of 15-minute to 24-hour durations and ranging from a 100- to 0.1-percent annual exceedance probability (1-year to 1,000-year recurrence intervals). Flood-inundation maps were produced for depths at a reference location of 3 to 16 feet, or a depth exceeding the 0.1-percent annual exceedance probability interval precipitation. The results of each precipitation duration-frequency value were represented by a 1-foot-increment inundation map based on the generated peak streamflow from that rainfall event and the corresponding water-surface elevation at the East Fork Little Blue River reference location. Within the HEC–RAS model, 240 scenarios were developed from the design rainfall events with each of 3 antecedent conditions. Additional scenarios were created to simulate the effects of projected precipitation scenarios on the 100-year recurrence interval, 24-hour storm and the 100-year recurrence interval, 6-hour storm. All simulation results were assigned to a flood-inundation map condition based on the generated peak flow and corresponding water-surface elevation at the East Fork Little Blue River reference location. The flood-inundation maps are shown on a web mapping application made available to the public through the City of Lee’s Summit (hyperlink will be added when available). The flood-inundation maps are tied to real-time precipitation data obtained from the Automated Surface Observing System weather station at the Lee’s Summit Municipal Airport, accessible at https://mesonet.agron.iastate.edu/request/download.phtml?network=MO_ASOS . The availability of these maps, along with information regarding observed rainfall, could help provide emergency management personnel and residents with information that is critical for flood-response activities, such as evacuations and road closures, and for postflood recovery efforts.

Missouri

Digitizer Suite: The Albuquerque Seismological Laboratory Digitizer Testing Suite

Laboratory testing of digitizers and seismometers helps ensure that prior to deployment the instrumentation can produce high quality data and is operating within specifications. In this work we detail the software package called: the Albuquerque Seismological Laboratory (ASL) Digitizer Test Suite. This Java software package provides several algorithms to verify various performance parameters of digitizers commonly used for recording analog seismic instruments. The goal of these tests is not to be exhaustive, but to identify common failures that could compromise the integrity of seismic data being recorded on the digitizer. For example, Sandia National Laboratories (e.g., Slad and Merchant, 2018) routinely do comprehensive testing of digitizers for various monitoring missions. While these tests reports are valuable for comprehensively characterizing a recording system, it would be resource intensive to conduct such tests on every seismic recorder used in a network. We focus on tests that include ways to estimate the sensitivity, timing, self-noise, and clip-level of the digitizer, as well as the fidelity of the signal being recorded. The software is publicly available and provides a way for the community to verify the integrity of a digitizer using a minimum amount of outside equipment.

Seismological Research Letters

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ~1,900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1,500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (~1,000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

EarthArXiv

An unexplained tsunami: Was there megathrust slip during the 2020 Mw7.6 Sand Point, Alaska, earthquake?

On October 19, 2020, the M w 7.6 Sand Point earthquake struck south of the Shumagin Islands in Alaska. Moment tensors indicate the earthquake was primarily strike-slip, yet the event produced an enigmatic tsunami that was larger and more widespread than expected for an earthquake of that magnitude and mechanism. Using a suite of hydrodynamic, seismic, and geodetic modeling techniques, we explore plausible causes of the tsunami. We find that strike-slip models consistent with the moment tensor orientation cannot produce the observed tsunami. Hydrodynamic inversion of sea surface deformation from deep ocean and tide gauge data suggest seafloor deformation more closely matches a megathrust, rather than a strike-slip, source. Static slip inversions, using sea level and Global Navigation Satellite System data, allow for a portion of co-seismic megathrust slip that can explain tsunamigenesis. Combining all available geophysical datasets to model the kinematic rupture, we show that considerable, relatively slow, megathrust slip is allowable in the Shumagin segment, concurrent with strike-slip faulting. We hypothesize that the slow megathrust rupture does not contribute much seismic radiation allowing it to previously go unnoticed with traditional seismic monitoring.

Alaska

Groundwater source water assessment area delineation of public supply wells in the Treasure Valley, western Idaho

The Idaho Department of Environmental Quality (IDEQ) is responsible for assessing the source water for public water supply systems including the delineation of source water assessment areas for wells, which are defined as the subsurface areas contributing water to a well during a period of time. Part of the IDEQ assessment plan is to update source water assessments over time. The U.S. Geological Survey (USGS) developed a new groundwater-flow model for part of the western Snake River Plain aquifer in southwestern Idaho. This groundwater- flow model provided a new opportunity for IDEQ to update source water assessment for public water supply wells within the model boundary. The USGS, in cooperation with IDEQ, used the USGS Treasure Valley Groundwater Flow Model along with a MODPATH particle tracking post-processing program to reassess public-water supply source water assessment areas. The USGS created an automated script that requests a well location, depth, and pumpage rate, and then incorporates that information into the Treasure Valley Groundwater Flow Model combined with the MODPATH model to create 3-, 6-, and 10-year time of travel zones that are output to a geographic information system shapefile. The TVSWA_Delineator script provides a fast, transparent tool for IDEQ to reassess or create new public-water supply source water assessment area delineations based on new and updated information and is available as a Python script and a Windows executable with the compiled script and all necessary components. TVSWA_Delineator utilizes a quadtree approach to rediscretize the Treasure Valley Groundwater Flow Model grid around the pumping well location from 1-mile cell lengths telescoped down to 1/16 mile. This rediscretization increases the source water assessment area delineation resolution near the pumping well and minimizes the effect of weak sinks in the MODPATH model. The stress inputs for each month of the final 10 years (2006 to 2015) of the Treasure Valley Groundwater Flow model historical simulation were averaged for the particle tracking analysis. The MODPATH model used backwards tracking of particles released at each stress period to create the source water assessment area delineations. This report documents the creation of the TVSWA_Delineator Python script, including adaptations made to the Treasure Valley Groundwater Flow Model, creation of a companion MODPATH model, and post-processing results to provide source water assessment areas.

Idaho

Geoelectric evidence for a wide spatial footprint of active extension in central Colorado

Three-dimensional magnetotelluric (MT) imaging in central Colorado reveals a set of north-striking high-conductivity tracks at lower-crustal (50–20 km) depths, with conductive finger-like structures rising off these tracks into the middle crust (20–5 km depth). We interpret these features to represent saline aqueous fluids and partial melt that are products of active extensional tectonomagmatism. These conductors are distributed over a wider region than the narrow corridor along which Rio Grande rift structures are traditionally mapped at the surface, and they consequently demarcate regions of the lower crust where accommodation of bulk extensional strain has concentrated conductive phases. Our observations reveal limitations in existing models of Rio Grande rift activity and may reflect unrecognized spatiotemporal variations in rift system evolution globally.

Colorado

GRAPES: Earthquake early warning by passing seismic vectors through the grapevine

Estimating an earthquake's magnitude and location may not be necessary to predict shaking in real time; instead, wavefield-based approaches predict shaking with few assumptions about the seismic source. Here, we introduce GRAph Prediction of Earthquake Shaking (GRAPES), a deep learning model trained to characterize and propagate earthquake shaking across a seismic network. We show that GRAPES’ internal activations, which we call “seismic vectors”, correspond to the arrival of distinct seismic phases. GRAPES builds upon recent deep learning models applied to earthquake early warning by allowing for continuous ground motion prediction with seismic networks of all sizes. While trained on earthquakes recorded in Japan, we show that GRAPES, without modification, outperforms the ShakeAlert earthquake early warning system on the 2019 M7.1 Ridgecrest, CA earthquake.

Shimane/HiroshimaPrefectures

Uranium analysis of single drops of natural waters using the fission-track technique

The fission-track technique has been applied to uranium analysis of natural waters using a single drop of water. Samples may be collected in the field by evaporating a drop of water on a detector, and samples may then be analyzed by returning the detector to the laboratory. A sample collecting kit has been assembled, which facilitates the designed sampling method. Some unique advantages of this technique are picogram sensitivity (10 -12 g) for uranium on single drops of water, maintenance of sample integrity during transport and storage, and the ability to discern whether the uranium is in solution or in the suspended material. Counting the tracks is the most time-consuming part of the analysis, but it can be reduced by using automatic counting systems. The analytical error is generally ± 10 percent over the entire range of concentrations.

Open-File Report

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana

Flood-inundation maps for the Cuyahoga River at Jaite, Ohio, 2024

Digital flood-inundation maps for a nearly 6-mile reach of the Cuyahoga River at Jaite, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. The maps depict estimates of the extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 04206425 on the Cuyahoga River at Jaite, Ohio. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The hydraulic model was calibrated to the current USGS streamgage data and then used to compute 15 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from 6 to 20 feet, which correspond to below “action stage” to “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used with a geographic information system digital elevation model derived from light detection and ranging data to delineate the areas flooded at each stage. These maps, along with current stage data from the USGS streamgage and forecasted high-flow stages from the National Weather Service, can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Ohio

Groundwater budget for the surficial aquifer surrounding Lake Nokomis, Minneapolis, Minnesota

During prolonged periods of above-average precipitation, rising groundwater levels have the potential to cause damage to and interfere with underground infrastructure and building foundations. To understand the relations between precipitation and groundwater in the vicinity of Lake Nokomis, the U.S. Geological Survey, in collaboration with the University of Minnesota, quantified five components of the groundwater budget: groundwater recharge, change in surficial aquifer storage, surficial aquifer groundwater discharge to Lake Nokomis, groundwater evapotranspiration, and groundwater discharge to underlying bedrock aquifers. Field data, geologic records, and empirical calculation methods were used to quantify groundwater budget components for April 2023 through April 2024. Lake water budget data indicate that Lake Nokomis is a flowthrough system during periods with no outflow through the weir, with groundwater inputs equal to outputs. Roughly 40 percent of precipitation that fell in the study area was added to the surficial aquifer as recharge. Uncertainty in the vertical hydraulic conductivity resulted in wide-ranging estimates (spanning three orders of magnitude) of water discharging from the surficial aquifer to the underlying bedrock aquifer. Drought conditions persisted for the duration of this study and were not representative of the conditions that motivated this study. This study is a start towards understanding relations between precipitation, Lake Nokomis levels, and groundwater levels that could affect local underground infrastructure.

Minnesota

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report

Quaternary-active faults and the role of inherited structures in the Sacramento-San Joaquin Delta, western Central Valley, northern California

Seismic sources and their associated hazards within the Sacramento-San Joaquin Delta region of north-central California are relatively poorly characterized as compared to other, more heavily studied regions of northern California, such as the San Francisco Bay Area. Here we present a synthesis of subsurface, bedrock geology, and geodetic datasets from the Delta and from the Coast Ranges and Diablo Range to the northwest and southwest, respectively. We integrate these data and our own surface geologic and geomorphic observations to present a comprehensive review of faults in the Delta that exhibit Quaternary activity. Structural geologic data from the surrounding region highlight the significant influence that Late Cretaceous-to-Paleogene forearc structures exert on the geometry and kinematics of major Quaternary-active structures within the Delta. These inherited structures — including the Pittsburg-Kirby Hills Fault, Midland Fault, and Great Valley Fault System — exhibit a range of geometries and kinematics. Analysis of geomorphology along these structures suggests that these structures combine to accommodate Quaternary strain across the Delta region. A clearer understanding of subsurface geometries and structural relationships, built upon the regional tectonic history, provides insight into modern deformation accommodated on older structures and helps inform interpretations of seismic hazard within the Delta.

California

Groundwater and surface-water interactions in the Lower Duwamish Waterway, Seattle, Washington

The U.S. Geological Survey (USGS), in cooperation with the Washington State Department of Ecology (Ecology), conducted a study to describe the current understanding of the regional groundwater system of the lower Duwamish River valley and groundwater and surface-water interactions in the lower Duwamish Waterway. The lower Duwamish Waterway is the final 5-mile (mi) reach of the Duwamish River before it empties into Elliott Bay in Puget Sound near Seattle, Washington. A nearshore site (hereinafter referred to as “Nearshore Site” to distinguish the particular site from general discussions of nearshore areas) along the western shoreline of the Duwamish River, about 1.5 mi upstream from the river mouth, was selected for focused groundwater data collection by USGS. Data loggers were deployed in seven groundwater wells and one stilling well in the Duwamish River to measure specific conductance, temperature, and depth at 15-minute intervals for a period of about 2 years. At the Nearshore Site during 2020–22, water levels in the shallow wells were 3–8 feet (ft) higher than water levels in the deep wells, providing evidence for a low-permeability layer between the shallow and deep aquifers in this area. The shallow wells had a pronounced seasonal variability, with high water levels in winter and low water levels in summer. Data from the deep wells showed far less seasonal variability, with slight increases in winter and a near-constant water level from spring to autumn. The deep wells had a strong hydraulic connection to the Duwamish River, as evidenced by the synchronous water-level variability during the tidal cycle, whereas the shallow wells had minimal to no tidal response. The potentiometric maps developed for the Nearshore Site and surrounding areas indicate large differences in groundwater-flow directions for the shallow and deep aquifers at low and high tides. For the shallow aquifer, flow is toward the lower Duwamish Waterway near the Nearshore Site, regardless of the tidal condition. For the deep aquifer, a potentiometric trough forms parallel to the shoreline during high tide, indicating that groundwater flow converges from the uplands to the west and the Duwamish River to the east. The geometry of the potentiometric surfaces between the nearshore-most well and the shoreline is complex and is further confounded by intermittent shoreline armoring and other buried infrastructure, which could serve as either a barrier or a conduit to flow. Groundwater and surface-water interactions in the lower Duwamish Waterway are inherently complex as a result of three overarching factors. First, water levels in the lower reaches of the Duwamish River vary daily by 11–16 ft because of tides from Puget Sound, which create large swings in the hydraulic gradient in the nearshore groundwater system. Second, the density and chemical composition of water in the Duwamish River change daily with the tides and seasonally, which constrains how river water entering the nearshore sediments interacts with discharging groundwater. Third, the nearshore subsurface and shoreline conditions are heterogenous because of extensive shoreline armoring over the past century, which governs the flow of groundwater and infiltrating river water. These unique features of groundwater and surface-water interactions in the lower Duwamish Waterway thus govern the transport of terrestrial contaminants to the lower Duwamish Waterway. Furthermore, the heterogenous aquifer properties in the lower Duwamish Waterway contribute to spatially and temporally dynamic contaminant-transport processes.

Washington

Thermo-hydrologic processes governing supra-permafrost talik dynamics in discontinuous permafrost near Umiujaq (Québec, Canada)

Widespread supra-permafrost talik formation is currently recognized as a critical mechanism that could accelerate permafrost thaw in the Arctic (e.g., Connon et al. 2018; Farquharson et al. 2022). However, the trajectory of permafrost dynamics following talik formation may prove difficult to predict. Physically-based cryohydrogeologic models provide a powerful tool for understanding processes and factors controlling talik dynamics and, ultimately, how permafrost will respond to climate change. Such models are typically used to represent multiple non-linear processes relevant for groundwater systems in cold regions, such as coupled heat and groundwater movement, including freeze-thaw dynamics and the effects on the surface energy balance and the subsurface thermal and hydraulic properties (Lamontagne-Hallé et al. 2020). Though cryohydrogeologic modeling advances have been made in simulating talik dynamics, few applications have been tested against robust long-term hydrometeorological and subsurface observations.

Quebec

Acid-rain weathering of a metasedimentary rock basin, Herkimer County, New York

A geochemical balance of major chemical constituents of precipitation inflow with those of surface-water outflow was used to evaluate the effect of acid rainfall (average pH = 4.3) on weathering rates of metasedimentary rocks underlying a surface-water basin in New York State. Precipitation samples and surface-water samples show that approximately 45 percent of the net cation outflow is due to weathering by precipitation acidity. The remaining 55 percent of the cation load in the outflow is attributed to interactions between atmosphere, rock, and soil water in the unsaturated zone. Comparison of the acidity of acid precipitation and air-equilibrated distilled water suggests that since preindustrial time, precipitation acidity has probably increased weathering rates for this basin approximately 75 percent. The increased acidity of the precipitation may also increase the rate of dissolution of heavy metals from water-piping systems.

New York

Towards mobile wind measurements using joust configured ultrasonic anemometer for applications in gas flux quantification

Small uncrewed aerial systems (sUASs) can be used to quantify emissions of greenhouse and other gases, providing flexibility in quantifying these emissions from a multitude of sources, including oil and gas infrastructure, volcano plumes, wildfire emissions, and natural sources. However, sUAS-based emission estimates are sensitive to the accuracy of wind speed and direction measurements. In this study, we examined how filtering and correcting sUAS-based wind measurements affects data accuracy by comparing data from a miniature ultrasonic anemometer mounted on a sUAS in a joust configuration to highly accurate wind data taken from a nearby eddy covariance flux tower (aka the Tower). These corrections had a small effect on wind speed error, but reduced wind direction errors from 50° to >120° to 20–30°. A concurrent experiment examining the amount of error due to the sUAS and the Tower not being co-located showed that the impact of this separation was 0.16–0.21 ms − 1 "> ms − 1 , a small influence on wind speed errors. Lower wind speed errors were correlated with lower turbulence intensity and higher relative wind speeds. There were also some loose trends in diminished wind direction errors at higher relative wind speeds. Therefore, to improve the quality of sUAS-based wind measurements, our study suggested that flight planning consider optimizing conditions that can lower turbulence intensity and maximize relative wind speeds as well as include post-flight corrections.

Alaska