Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2021

Precipitation-runoff processes in the Merced River Basin, Central California, with prospects for streamflow predictability, water years 1952–2013

The U.S. Geological Survey, in cooperation with the California Department of Water Resources (DWR), has constructed a new spatially detailed Precipitation-Runoff Modeling System (PRMS) model for the Merced River Basin, California, which is a tributary of the San Joaquin River in California. Operated through an Object User Interface (OUI) with Ensemble Streamflow Prediction (ESP) and daily climate distribution preprocessing functionality, the model is calibrated primarily to simulate (and eventually, forecast) year-to-year variations of inflows to Lake McClure during the critical April–July snowmelt season. The model is intended to become part of a suite of methods used by DWR for estimating daily streamflow from the Merced River Basin, especially during the snowmelt season. This study describes the results of the application of an analysis tool that simulates responses to climate and land-use variations at a higher spatial resolution than previously available to DWR. A geographic information system was used to delineate the model domain, that is, areas draining to a single outlet at U.S. Geological Survey streamflow-gaging station 11270900, Merced River below Merced Falls Dam, near Snell, CA (also known as California Data Exchange Center station MRC), and subdrainage areas, including four draining to internal gages used as calibration targets. Using this delineation, three contiguous subbasins were recognized and, along with the model domain and nested calibration targets, are the simulation units evaluated in this report. An auto-calibration tool, LUCA (Let Us CAlibrate), was used for each calibration node, from headwaters to basin outlet, and then parameters were manually adjusted to complete the calibration. The main objective was to match April–July snowmelt seasonal discharge values of simulated streamflow to observed (measured or reconstructed) discharge values. Calibration or validation periods used site-specific streamflows—mostly from October 1, 1988, through September 30, 2013—but differed according to the period-of-record available for the measurements collected at internal gages or reconstructed flows for the single outlet. The accuracy of the Merced PRMS streamflow simulations varied seasonally, as compared to observed values. Based on statistical results, the Merced PRMS model satisfactorily simulated snowmelt seasonal streamflows. April–July calibrations for all areas had small negative bias (not greater than 7 percent) and low relative error (less than 8 percent). Less satisfactory performance for other seasons was attributed to several factors: (1) high uncertainty in low or zero flows in summer and fall, (2) lack of accounting for basin withdrawals and anthropogenic water use, (3) unavailability and (or) inaccuracy of observed (measured) meteorological input data, and (4) uncertainty in reconstructed streamflow data. With some additional refinement, the Merced PRMS model may be used for forecasting seasonal and longer-term streamflow variations; evaluating forecasted and past climate and land cover changes; providing water-resource managers with a consistent and documented method for estimating streamflow at ungaged sites within the basin; and aiding environmental studies, hydraulic design, water management, and water-quality projects in the Merced River Basin.

California↗
USGS2007

Geologic Map of the Goleta Quadrangle, Santa Barbara County, California

This map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying those parts of the Santa Barbara coastal plain and adjacent southern flank of the Santa Ynez Mountains within the Goleta 7 ?? quadrangle at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. The Goleta map overlaps an earlier preliminary geologic map of the central part of the coastal plain (Minor and others, 2002) that provided coverage within the coastal, central parts of the Goleta and contiguous Santa Barbara quadrangles. In addition to new mapping in the northern part of the Goleta quadrangle, geologic mapping in other parts of the map area has been revised from the preliminary map compilation based on new structural interpretations supplemented by new biostratigraphic data. All surficial and bedrock map units are described in detail in the accompanying map pamphlet. Abundant biostratigraphic and biochronologic data based on microfossil identifications are presented in expanded unit descriptions of the marine Neogene Monterey and Sisquoc Formations. Site-specific fault-kinematic observations (including slip-sense determinations) are embedded in the digital map database. The Goleta quadrangle is located in the western Transverse Ranges physiographic province along an east-west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The Santa Barbara coastal plain surface, which spans the central part of the quadrangle, includes several mesas and hills that are geomorphic expressions of underlying, potentially active folds and partly buried oblique and reverse faults of the Santa Barbara fold and fault belt (SBFFB). Strong earthquakes have occurred offshore within 10 km of the Santa Barbara coastal plain in 1925 (6.3 magnitude), 1941 (5.5 magnitude) and 1978 (5.1 magnitude). These and numerous smaller seismic events located beneath and offshore of the coastal plain, likely occurred on reverse-oblique-slip faults that are similar to, or continuous with, Quaternary reverse faults crossing the coastal plain. Thus, faults of the SBFFB pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. In addition, numerous Quaternary landslide deposits along the steep southern flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements in developed areas. Folded, faulted, and fractured sedimentary rocks in the subsurface of the coastal plain and adjacent Santa Barbara Channel are sources and form reservoirs for economic deposits of oil and gas, some of which are currently being extracted offshore. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and interpretation of these and other geologic hazards and resources in the Goleta region.

Open-File Report↗
USGS2012

Surficial geologic map of the Ivanpah 30' x 60' quadrangle, San Bernardino County, California, and Clark County, Nevada

This map was prepared as part of a suite of surficial geologic maps covering the northern Mojave Desert to investigate neotectonic features and map soils of relevance for ecological properties. The map covers an area of the eastern Mojave Desert that includes the Cinder Cones, Cima Dome, Ivanpah Valley, and Lanfair Valley and includes major mountain chains of the Providence, New York, and Ivanpah Mountains, all within the Mojave National Preserve. Surficial geology includes expansive pediments, broad valley-bottom sediment tracts, and dune fields of the Devils Playground. Two Quaternary fault zones are identified, as well as several others that probably are Quaternary.

California, Nevada↗
USGS2003

Geology of the continental margin beneath Santa Monica Bay, Southern California, from seismic-reflection data

We interpret seismic-reflection data, which were collected in Santa Monica Bay using a 70-in3 generator-injector air gun, to show the geologic structure of the continental shelf and slope and of the deep-water, Santa Monica and San Pedro Basins. The goal of this research is to investigate the earthquake hazard posed to urban areas by offshore faults. These data reveal that northwest of the Palos Verdes Peninsula, the Palos Verdes Fault neither offsets the seafloor nor cuts through an undeformed sediment apron that postdates the last sea level rise. Other evidence indicates that this fault extends northwest beneath the shelf in the deep subsurface. However, other major faults in the study area, such as the Dume and San Pedro Basin Faults, were active recently, as indicated by an arched seafloor and offset shallow sediment. Rocks under the lower continental slope are deformed to differing degrees on opposite sides of Santa Monica Canyon. Northwest of this canyon, the continental slope is underlain by a little-deformed sediment apron; the main structures that deform this apron are two lower-slope anticlines that extend toward Point Dume and are cored by faults showing reverse or thrust separation. Southeast of Santa Monica Canyon, lower-slope rocks are deformed by a complex arrangement of strike-slip, normal, and reverse faults. The San Pedro Escarpment rises abruptly along the southeast side of Santa Monica Canyon. Reverse faults and folds underpinning this escarpment steepen progressively southeastward. Locally they form flower structures and cut downward into basement rocks. These faults merge downward with the San Pedro Basin fault zone, which is nearly vertical and strike slip. The escarpment and its attendant structures diverge from this strike-slip fault zone and extend for 60 km along the margin, separating the continental shelf from the deep-water basins. The deep-water Santa Monica Basin has large extent but is filled with only a thin (less than 1.5-km) section of what are probably post-Miocene rocks and sediment. Extrapolating ages obtained from Ocean Drilling Program site 1015 indicates that this sedimentary cover is Quaternary, possibly no older than 600 ka. Folds and faults along the base of the San Pedro Escarpment began to form during 8-13 ka ago. Refraction-velocity data show that high-velocity rocks, probably the Catalina Schist or Miocene volcanic rocks, underlie the sedimentary section. The San Pedro Basin developed along a strike-slip fault, widens to the southeast, and is deformed by faults having apparent reverse separation and by folds near Redondo Canyon and the Palos Verdes Peninsula.

California↗
USGS2016

Eruptive history of Mammoth Mountain and its mafic periphery, California

This report and accompanying geologic map portray the eruptive history of Mammoth Mountain and a surrounding array of contemporaneous volcanic units that erupted in its near periphery. The moderately alkaline Mammoth eruptive suite, basaltic to rhyodacitic, represents a discrete new magmatic system, less than 250,000 years old, that followed decline of the subalkaline rhyolitic system active beneath adjacent Long Valley Caldera since 2.2 Ma (Hildreth, 2004). The scattered vent array of the Mammoth system, 10 by 20 km wide, is unrelated to the rangefront fault zone, and its broad nonlinear footprint ignores both Long Valley Caldera and the younger Mono-Inyo rangefront vent alignment. The Mammoth Lakes area of Mono County, owing to its spectacular alpine landscape, has become one of California’s busiest recreational playgrounds and a regional center of real estate development. The name applies to the town of Mammoth Lakes as well as to the cluster of lakes in a large cirque southwest of town that is now locally called the Lakes Basin. The town has spread around the eastern base of Mammoth Mountain, a late Pleistocene pile of silicic lava domes, and has locally expanded onto lower slopes of the mountain itself (fig. 1). Looming nearly 1,000 m above the downtown area, much of the 5-km-wide volcanic edifice has been laced with chair lifts, gondolas, ski runs, and bike paths by the Mammoth Mountain Ski Area, a corporate entity under permit from Inyo National Forest. In addition to skiing, longestablished, snowboarding and summertime mountain biking have recently become major activities. Tourism to Mammoth Lakes is estimated to be 1,300,000 visitors per winter and 1,500,000 per summer. Some of America’s top long-distance runners also live and train in Mammoth Lakes, attracted by its elevation and its variety of challenging trails. At the western base of Mammoth Mountain, along the canyon of the Middle Fork San Joaquin River, lies the Devils Postpile National Monument, a National Park Service enclave surrounded by extensive wilderness areas administered by the U.S. Forest Service. As many as 2,000 visitors per day enter the monument during the summer season. The area also contains several of the busiest trailheads in the Sierra Nevada, providing wilderness access for hikers, pack animals, mountaineers, and fishermen. Many geographic names that appear in this report are informal despite having been in local use for decades. Most appear on maps distributed by the Town of Mammoth Lakes or the Mammoth Mountain Ski Area and can be found here on map figures 2–5, on several photo figures, and on the geologic map.

California↗
USGS2017

Geologic setting of the proposed West Flank Forge Site, California: Suitability for EGS research and development

The proposed West Flank FORGE site is within the China Lake Naval Air Weapons Station (NAWS), China Lake, CA. The West Flank is west of the Coso geothermal field, an area of China Lake NAWS dominated by the Quaternary Coso volcanic field largely comprised of rhyolite domes and their volcaniclastic and epiclastic horizons. The largest dome flow complex, Sugarloaf Mountain, marks the northwestern margin of the geothermal field. The West Flank is situated due west of Sugarloaf. The geologic setting of the West Flank was determined from one deep well (83-11) drilled as a potential production hole in 2009. The bottom-hole temperature (BHT) of well 83-11 approaches 600 oF (315˚C), but flow tests demonstrate very low, non-commercial permeabilities. With the exception of the upper 600 feet of volcaniclastic alluvium, well 83-11 is completed in granitic basement. The West Flank possesses the primary attributes of a FORGE site: non-commercial permeability ( <10 -16 m 2 ), a 175˚ to 225˚C temperature range in crystalline rocks, and a location outside an existing geothermal field The Coso Mountains host the Coso volcanic field and are within a right-releasing stepover between the dextral Airport Lake (ALF) and Little Lake fault zones (LLFZ) and the Wild Horse Mesa and Owens Valley faults. Two distinct fault populations have been identified at Coso: WNW-trending and antithetical, NE-trending strike-slip faults and N- to NNE-trending normal faults. These faults are both high permeability drilling targets at depth within the main (productive) geothermal field and they locally segment the field into distinct hydrothermal regimes. The West Flank may be segmented from the rest of the field by one such northerly trending fault. The overall minimum principal stress orientation in the main geothermal field varies from 103˚ to 108˚; however, the minimum horizontal principal stress in 83-11 is rotated to 081˚.

California↗
USGS1985

A seismic-refraction profile across the San Andreas, Sargent, and Calaveras faults, west-central California

In 1981, the United States Geological Survey recorded a seismic-refraction profile across the southern Santa Cruz Mountains in west-central California to examine the shallow velocity structure of this seismogenic region. This 40-km-long profile, which consisted of three shotpoints, extended northeastward from near Watsonville, California, to Coyote Lake, crossing the San Andreas, Sargent, and Calaveras faults. This entire region is characterized by a highly heterogeneous upper crust. West of Watsonville, 1 km of alluvium with a velocity of 2.12 km/sec overlies a basement with a velocity 5.45 km/sec. The abrupt deepening of basement by 1.5 km just east of Watsonville at a subsurface fault suggests that the Zayante fault to the north and the Vergeles fault to the south are connected. The Tertiary sediment at the San Andreas fault is 2.5 km thick and has a velocity of 3.34 km/sec. The San Andreas fault is not marked by any distinctive seismic velocity features, whereas a 1-km-wide low velocity zone is found at both the Sargent and Calaveras faults. East of the Sargent fault, the basement surface forms a broad anticlinal structure, with velocities ranging from 5.4 to 6.0 km/sec. From the anticlinal crest, basement dips to the east beneath the Santa Clara Valley and reaches a maximum depth of 1 km on the east side; the overlying alluvium has a velocity of 2.7 km/sec. At the crest of the basement anticlinal structure, a vertical low-velocity zone coincident with exposed serpentine provides strong evidence of faulting.

California↗
USGS2012

Geophysical investigations of geology and structure at the Martis Creek Dam, Truckee, California

A recent evaluation of Martis Creek Dam highlighted the potential for dam failure due to either seepage or an earthquake on nearby faults. In 1972, the U.S. Army Corps of Engineers constructed this earthen dam, located within the Truckee Basin to the north of Lake Tahoe, CA for water storage and flood control. Past attempts to raise the level of the Martis Creek Reservoir to its design level have been aborted due to seepage at locations downstream, along the west dam abutment, and at the base of the spillway. In response to these concerns, the U.S. Geological Survey has undertaken a comprehensive suite of geophysical investigations aimed at understanding the interplay between geologic structure, seepage patterns, and reservoir and groundwater levels. This paper concerns the geologic structure surrounding Martis Creek Dam and emphasizes the importance of a regional-scale understanding to the interpretation of engineering-scale geophysical data. Our studies reveal a thick package of sedimentary deposits interbedded with Plio-Pleistocene volcanic flows; both the deposits and the flows are covered by glacial outwash. Magnetic field data, seismic tomography models, and seismic reflections are used to determine the distribution and chronology of the volcanic flows. Previous estimates of depth to basement (or the thickness of the interbedded deposits) was 100 m. Magnetotelluric soundings suggest that electrically resistive bedrock may be up to 2500 m deep. Both the Polaris Fault, identified outside of the study area using airborne LiDAR, and the previously unnamed Martis Creek Fault, have been mapped through the dam area using ground and airborne geophysics. Finally, as determined by direct-current resistivity imaging, time-domain electromagnetic sounding, and seismic refraction, the paleotopography of the interface between the sedimentary deposits and the overlying glacial outwash plays a principal role both in controlling groundwater flow and in the distribution of the observed seepage.

California↗
USGS2004

Availability Of Ground-Water Data For California, Water Year 2003

The U.S. Geological Survey, Water Resources, in cooperation with Federal, State, and local agencies, obtains a large amount of data pertaining to the groundwater resources of California each water year (October 1?September 30). These data constitute a valuable database for developing an improved understanding of the water resources of the State. Beginning with the 1985 water year and continuing through 1993, these data were published in a report series entitled ?Water Resources Data for California, Volume 5. Ground-Water Data.? Prior to the introduction of this series, historical ground-water information was published in U.S. Geological Survey Water-Supply Papers.

Fact Sheet↗
USGS2012

Using micro-seismicity and seismic velocities to map subsurface geologic and hydrologic structure within the Coso geothermal field, California

Geothermal reservoirs derive their capacity for fluid and heat transport in large part from faults and fractures. Micro-seismicity generated on such faults and fractures can be used to map larger fault structures as well as secondary fractures that add access to hot rock, fluid storage and recharge capacity necessary to have a sustainable geothermal resource. Additionally, inversion of seismic velocities from micro-seismicity permits imaging of regions subject to the combined effects of fracture density, fluid pressure and steam content, among other factors. We relocate 14 years of seismicity (1996-2009) in the Coso geothermal field using differential travel times and simultaneously invert for seismic velocities to improve our knowledge of the subsurface geologic and hydrologic structure. We utilize over 60,000 micro-seismic events using waveform cross-correlation to augment to expansive catalog of P- and S-wave differential travel times recorded at Coso. We further carry out rigorous uncertainty estimation and find that our results are precise to within 10s of meters of relative location error. We find that relocated micro-seismicity outlines prominent, through-going faults in the reservoir in some cases. We also find that a significant portion of seismicity remains diffuse and does not cluster into more sharply defined major structures. The seismic velocity structure reveals heterogeneous distributions of compressional (Vp) and shear (Vs) wave speed, with Vp generally lower in the main field when compared to the east flank and Vs varying more significantly in the shallow portions of the reservoir. The Vp/Vs ratio appears to outline the two main compartments of the reservoir at depths of -0.5 to 1.5 km (relative to sea-level), with a ridge of relatively high Vp/Vs separating the main field from the east flank. In the deeper portion of the reservoir this ridge is less prominent. Our results indicate that high-precision relocations of micro-seismicity can provide useful insight into: 1) prominent structural features, faults and fractures that contribute to the flow of fluid and heat in the reservoir; 2) diffuse seismicity throughout the reservoir representing fractures that likely contribute to the overall permeability, storage and heat exchange capacity of the reservoir, but which are not confined to prominent faults; and 3) seismic velocities that outline the major hydrologic compartments within the Coso geothermal field.

Coso geothermal field↗
USGS1988

Geologic map of the northwestern Caliente Range, San Luis Obispo County, California

The map area lies in the southern Coast Ranges of California, north of the Transverse Ranges and west of the southern San Joaquin Valley. This region is part of the Salinia-Tujunga composite terrane that is bounded on the northeast by the San Andreas fault (fig. 1) and on the southwest by the Nacimiento fault zone (Vedder and others, 1983). The Chimineas fault of this map is inferred to be the boundary between the Salinia and the Tujunga terranes (Ross, 1972; Vedder and others, 1983). Geologic mapping in the region of the California Coast Ranges that includes the area of this map has been largely the work of T.W. Dibblee, Jr. Compilations of geologic mapping at a scale of 1:125,000 (Dibblee, 1962, 1973a) provide the regional setting for this map, the northeast border of which lies about 6 to 7 km southwest of the San Andreas fault. Ross (1972) mapped the crystalline basement rocks in the vicinity of Barrett Creek, along the northeast side of the Chimineas fault ("Barrett Ridge" of Ross, 1972). Recent 1:24,000-scale mapping in the La Panza Range (fig. 1) (Vedder and others 1986a,b) overlaps onto the southwest edge of this map and provides useful information about the older rocks, mostly southwest of San Juan Creek. Stratigraphic knowledge of the area, which lies in the northern part of the middle Tertiary Cuyama basin, has evolved over a period of years beginning with the molluscan biostratigraphic work of Anderson and Martin (1914) and Loel and Corey (1932). Hill and others (1958) described the Tertiary stratigraphy of the region and proposed stratigraphic names. This stratigraphy was discussed further by Dibblee (1973b), and his revised nomenclature is used here. Stratigraphic studies in the southeastern Caliente Range (fig. 1) (Repenning and Vedder, 1961; Vedder, 1973) provided valuable information on the interrelations of continental, shallow-marine, and deeper marine facies in the southern part of the Cuyama basin, which have basinwide application. More recent stratigraphic studies by Lagoe (1984, 1985, 1987, 1988) further elaborate on aspects of Miocene basin history and paleogeography. Contributions to the tectonic history of the area have been made by Schwade and others (1958), on the basis of oil exploration in the Cuyama Valley area (fig. 1) in the 1940's and 1950's; by Bartow (1974), as part of a regional stratigraphic study; by Ballance and others (1983), on the basis of a study of Oligocene and early Miocene sedimentation; and most recently by Davis and others (1988) and Yeats and others (1988), who utilized a variety of new data from seismic reflection and from stratigraphic and structural studies. Field work for this map was done mostly in 1969-73 as part of a regional study of the Simmler and Vaqueros Formations (Bartow, 1974). Detailed field mapping was, therefore, concentrated on those units; other parts of the area were mapped by geologic reconnaissance and air-photo interpretation that were supplemented by data from published maps (Dibblee, 1973a; Vedder and others, 1986a,h). Mapping of the crystalline basement rocks at "Barrett Ridge" is from Ross (1972, plate 1). The structural style depicted in the accompanying cross sections favors the thrust belt concepts of Davis and others (1988) over the older interpretations of Dibblee (1962) or Cross (1962).

California↗
USGS2005

Blind comparisons of shear-wave velocities at closely-spaced sites in San Jose, California: Proceedings of a Workshop held at the US Geological Survey, Menlo Park, May 3, 2004

Shear-wave velocities within several hundred meters of Earth's surface are important in specifying earthquake ground motions for engineering design. Not only are the shearwave velocities used in classifying sites for use of modern building codes, but they are also used in site-specific studies of particularly significant structures. Many are the methods for estimating sub-surface shear-wave velocities, but few are the blind comparisons of a number of the methods at a single site. The word "blind" is important here and means that the measurements and interpretations are done completely independent of one another. Stephen Hartzell of the USGS office on Golden, Colorado realized that such an experiment would be very useful for assessing the strengths and weaknesses of the various methods, and he and Jack Boatwright of the USGS office in Menlo Park, California, in cooperation with Carl Wentworth of the Menlo Park USGS office found a convenient site in the city of San Jose, California. The site had good access and space for conducting experiments, and a borehole drilled to several hundred meters by the Santa Clara Valley Water District was made available for downhole logging. Jack Boatwright asked David Boore to coordinate the experiment. In turn, David Boore persuaded several teams to make measurements, helped with the local logistics, collected the results, and organized and conducted an International Workshop in May, 2004. At this meeting the participants in the experiment gathered in Menlo Park to describe their measurements and interpretations, and to see the results of the comparisons of the various methods for the first time. This Open-File Report describes the results of that workshop. One of the participants, Michael Asten, offered to help the coordinator prepare this report. Because of his lead role in pulling the report together, Dr. Asten is the lead author of the paper to follow and is also the lead Compiler for the Open-File Report. It is important to recognize that most of the participants in the experiments contributed at their own expense. It is gratifying that many people recognized the importance of the experiment and were willing to volunteer their time and resources. We thank them for this effort. This Report is organized in three parts: the first part is a paper summarizing the results of the Workshop, and presenting some conclusions regarding the various methods; the second part is a compilation of those documents describing the experiments that were presented at the meeting (a few of the reports have had minor post-meeting revisions, but with only one exception noted later, none of the models were changed). The final part of this Report is a compilation of the presentations from the meeting -- these are largely in the form of Powerpoint files. No attempt has been made by the compilers to edit the material in parts 2 and 3. It is included here as is for the benefit of the reader.

California↗
USGS1995

Preliminary Geologic Map of the Thousand Oaks 7.5' Quadrangle, Southern California: A Digital Database

Thousand Oaks is located in Arroyo Conejo, a region spanning both southeastern Ventura County and extreme northwest Los Angeles County in southern California. It was discovered in 1542 by Spanish explorer Juan Rodriquez Cabrillo and eventually became part of the Spanish Rancho El Conejo land grant (conejo means 'rabbit' in Spanish, of which there are many in the area). It is located in the Santa Monica Mountains in the northwestern part of the greater Los Angeles area. The area is bordered by the San Fernando Valley and the city of Los Angeles to the east, Simi Hills to the north, Las Posas Hills and the Santa Rosa Valley to the northwest, Conejo Mountain (also known as Conejo Hills) and Oxnard Plain to the west, and the Santa Monica Mountains and Malibu to the southwest. The geology of the surrounding Santa Monica Mountains is dominated by a sequence of Tertiary sedimentary and volcanic rocks. These include the Tertiary Modelo Formation and the upper part of the Topanga Formation, other minor Tertiary rocks, and Miocene volcanic and intrusive rocks of the Conejo Formation. The basement units within the Santa Monica Mountains are a series of Jurassic and Cretaceous sedimentary rocks. The volcanic rocks of the Conejo Formation underlies much of the surrounding watersheds. The younger Tertiary sedimentary Modelo and Upper Topanga Formations flank the Conejo to the north and south. On the north slope of the Santa Monica Mountains where the Arroyo Conejo and Thousand Oaks are located, the Tertiary formations are gently folded. The south flank of the Santa Monica Mountains is structurally dominated by the Malibu Coast Fault that runs along the foot of the mountains. This fault, and associated structures, creates a complex geologic setting on the south flank of the Santa Monica Mountains. The active nature of the Malibu Coast fault and associated structures accounts for the steep and rugged coastal topography. The most widely exposed rock units in the area are the Plio-Pleistocene marine and nonmarine Pico and Saugus formations, which crop out on the southern flank of South Mountain-Oak Ridge and on the Las Posas uplands and Las Posas Hills. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southeast corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Formation into a local trough during Saugus time. Eroded from, and overlying, these bedrock formations are a series of recent alluvial units. These alluvial units include Quaternary alluvium comprised of alluvium, stream deposits, alluvial fan and floodplain deposits, beach deposits, dissected older alluvial deposits. Also present are Quaternary landslides and colluvium composed of landslide deposits and colluvium deposits. The colluvium represents relatively thick continuous deposits of soil and rock fragments that are common on the steep slopes of the coastal canyons, and generally feed the many landslides, soil slips, and debris flows.

Open-File Report↗
USGS2018

Golden eagle (Aquila chrysaetos) habitat selection as a function of land use and terrain, San Diego County, California

Beginning in 2014, the U.S. Geological Survey, in collaboration with Bloom Biological, Inc., began telemetry research on golden eagles ( Aquila chrysaetos ) captured in the San Diego, Orange, and western Riverside Counties of southern California. This work was supported by the San Diego Association of Governments, California Department of Fish and Wildlife, the U.S. Fish and Wildlife Service, the Bureau of Land Management, and the U.S. Geological Survey. Since 2014, we have tracked more than 40 eagles, although this report focuses only on San Diego County eagles. An important objective of this research is to develop habitat selection models for golden eagles. Here we provide predictions of population-level habitat selection for golden eagles in San Diego County based on environmental covariates related to land use and terrain.

California↗
USGS2005

Geophysical evidence for wedging in the San Gorgonio Pass structural knot, southern San Andreas fault zone, southern California

Geophysical data and surface geology define intertonguing thrust wedges that form the upper crust in the San Gorgonio Pass region. This picture serves as the basis for inferring past fault movements within the San Andreas system, which are fundamental to understanding the tectonic evolution of the San Gorgonio Pass region. Interpretation of gravity data indicates that sedimentary rocks have been thrust at least 5 km in the central part of San Gorgonio Pass beneath basement rocks of the southeast San Bernardino Mountains. Subtle, long-wavelength magnetic anomalies indicate that a magnetic body extends in the subsurface north of San Gorgonio Pass and south under Peninsular Ranges basement, and has a southern edge that is roughly parallel to, but 5-6 km south of, the surface trace of the Banning fault. This deep magnetic body is composed either of upper-plate rocks of San Gabriel Mountains basement or rocks of San Bernardino Mountains basement or both. We suggest that transpression across the San Gorgonio Pass region drove a wedge of Peninsular Ranges basement and its overlying sedimentary cover northward into the San Bernardino Mountains during the Neogene, offsetting the Banning fault at shallow depth. Average rates of convergence implied by this offset are broadly consistent with estimates of convergence from other geologic and geodetic data. Seismicity suggests a deeper detachment surface beneath the deep magnetic body. This interpretation suggests that the fault mapped at the surface evolved not only in map but also in cross-sectional view. Given the multilayered nature of deformation, it is unlikely that the San Andreas fault will rupture cleanly through the complex structures in San Gorgonio Pass. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗
USGS2015

Assessment of undiscovered continuous oil and gas resources in the Monterey Formation, San Joaquin Basin Province, California, 2015

Using a geology-based assessment methodology, the U.S. Geological Survey assessed mean volumes of 21 million barrels of oil (MMBO), 27 billion cubic feet of gas, and 1 million barrels of natural gas liquids in two assessment units (AUs) that may contain continuous oil resources. Mean volumes of oil for the individual assessment units are 14 MMBO in the Monterey Buttonwillow AU and 7 MMBO in the Monterey Maricopa AU.

California↗