Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The R Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
USGS2017

Challenges for creating a site-specific groundwater-use record for the Ozark Plateaus aquifer system (central USA) from 1900 to 2010

Hydrologic budgets to determine groundwater availability are important tools for water-resource managers. One challenging component for developing hydrologic budgets is quantifying water use through time because historical and site-specific water-use data can be sparse or poorly documented. This research developed a groundwater-use record for the Ozark Plateaus aquifer system (central USA) from 1900 to 2010 that related county-level aggregated water-use data to site-specific well locations and aquifer units. A simple population-based linear model, constrained to 0 million liters per day in 1900, provided the best means to extrapolate groundwater-withdrawal rates pre-1950s when there was a paucity of water-use data. To disaggregate county-level data to individual wells across a regional aquifer system, a programmatic hierarchical process was developed, based on the level of confidence that a well pumped groundwater for a specific use during a specific year. Statistical models tested on a subset of the best-available site-specific water-use data provided a mechanism to bracket historic groundwater use, such that groundwater-withdrawal rates ranged, on average, plus or minus 38% from modeled values. Groundwater withdrawn for public supply and domestic use accounted for between 48 and 74% of total groundwater use since 1901, highlighting that groundwater provides an important drinking-water resource. The compilation, analysis, and spatial and temporal extrapolation of water-use data remain a challenging task for water scientists, but is of paramount importance to better quantify groundwater use and availability.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2020

Critical evaluation of stable isotope mixing end-members for estimating groundwater recharge sources: Case study from the South Rim of the Grand Canyon, Arizona, USA

Springs and groundwater seeps along the South Rim of the Grand Canyon serve an important function for the region’s ecosystems, residents (both human and wild animal), and economy. However, these springs and seeps are potentially vulnerable to contamination, increased groundwater extraction, or reduced recharge due to climate change. Protection of South Rim groundwater resources requires improved understanding of the regional groundwater system. In this study, statistical methods are used to investigate δ2H and δ18O in precipitation, surface water, and groundwater. A mixing model for δ18O is developed using statistically distinct seasonal end-members represented by modeled winter (Nov-Apr.) precipitation and summer (May-Oct.) surface water run-off. The calculated fraction of winter recharge (Fwin) indicates that South Rim groundwater is primarily sourced from snow-melt and winter rains with an average Fwin of 0.97 ± 0.09. Groundwater sourced from the highest elevations of the study area are more depleted than the winter end-member suggesting values of Fwin are overestimated or a meaningful portion of recharge occurs at lower elevations. Lower elevation recharge from the Coconino Plateau is supported by consistent spatial trends in δ2H and δ18O with respect to longitude, Fwin values less than 0.9 for 9 of the 50 samples, and age tracer data indicating young groundwater discharging from springs which is distinct from old groundwater observed in the regional flow system. These results suggest a new conceptual model is needed to account for recharge sources from low elevation and summer precipitation. Results imply resource managers need to reconsider current land-use and water management practices on the South Rim to protect future water quantity and quality.

Arizona↗
USGS2023

Detection and quantification of preferential flow using artificial rainfall with multiple experimental approaches

Preferential flow in the unsaturated zone strongly influences important hydrologic processes, such as infiltration, contaminant transport, and aquifer recharge. Because it entails various combinations of physical processes arising from the interactions of water, air, and solid particles in a porous medium, preferential flow is highly complex. Major research is needed to improve the ability to understand, quantify, model, and predict preferential flow. Toward a solution, a combination of diverse experimental measurements at multiple scales, from laboratory scale to mesoscale, has been implemented to detect and quantify preferential paths in carbonate and karstic unsaturated zones. This involves integration of information from (1) core samples, by means of mercury intrusion porosimeter, evaporation, quasi-steady centrifuge and dewpoint potentiometer laboratory methods, to investigate the effect of pore-size distribution on hydraulic characteristics and the potential activation of preferential flow, (2) field plot experiments with artificial sprinkling, to visualize preferential pathways related to secondary porosity, through use of geophysical measurements, and (3) mesoscale evaluation of field data through episodic master recession modeling of episodic recharge. This study demonstrates that preferential flow processes operate from core scale to two different field scales and impact on the qualitative and quantitative groundwater status, by entailing fast flow with subsequent effects on recharge rate and contaminant mobilizing. The presented results represent a rare example of preferential flow detection and numerical modeling by reducing underestimation of the recharge and contamination risks.

Bari↗
USGS2025

Identifying strategies to manage boreal forests: Simulating moose and timber management scenarios at a landscape scale in the face of changing environmental conditions

There are ongoing debates among different stakeholders about which forest and ungulate management strategies will sustain high levels of timber and animal harvest and maintain important ecosystem functions under climate change. Ungulate-forest interactions are complex, including periods where forest regeneration is sensitive to browsing pressure, making it difficult to predict the consequences of a given strategy over time. To aid decision-making, we simulated the impacts of moose browsing on forest succession under 18 different combinations of moose ( Alces alces ) harvest rate levels and forest management scenarios in a boreal forest landscape in southern Sweden given projected changes in forest growth due to climate change. We found that the current management practices are important for sustaining a moose-forest system. Increasing moose harvest rates led to slightly smaller moose populations, larger estimates of landscape carrying capacity, and less biomass removal of Scots pine ( Pinus sylvestris ), a commercially valuable species. However, minor changes in the moose harvest were hardly affecting timber production. Increasing the timber harvest rotation time led to the highest estimates of Scots pine biomass, while thinning younger cohorts lead to the highest estimates of Norway spruce ( Picea abies ) biomass. These changes came without much effect to moose population dynamics. However, the increased broadleaf production scenario had a very large positive effect on total aboveground live biomass of deciduous species and on landscape carrying capacity and moose density. This scenario subsequently resulted in the greatest estimates of biomass removal of Scots pine, highlighting the tradeoffs associated with increased moose production.

European Journal of Forest Research↗
USGS1989

Seepage through a hazardous-waste trench cover

Water movement through a waste-trench cover under natural conditions at a low-level radioactive waste disposal site in northwestern Illinois was studied from July 1982 to June 1984, using tensiometers, a moisture probe, and meteorological instruments. Four methods were used to estimate seepage: the Darcy, zero-flux plane, surface-based water-budget, and groundwater-based water-budget methods. Annual seepage estimates ranged from 48 to 216 mm (5-23% of total precipitation), with most seepage occurring in spring. The Darcy method, although limited in accuracy by uncertainty in hydraulic conductivity, was capable of discretizing seepage in space and time and indicated that seepage varied by almost an order of magnitude across the width of the trench. Lowest seepage rates occurred near the center of the cover, where seepage was gradual. Highest rates occurred along the edge of the cover, where seepage was highly episodic, with 84% of the total there being traced to wetting fronts from 28 individual storms. Limitations of the zero-flux-plane method were severe enough for the method to be judged inappropriate for use in this study.Water movement through a waste-trench cover under natural conditions at a low-level radioactive waste disposal site in northwestern Illinois was studied from July 1982 to June 1984, using tensiometers, a moisture probe, and meteorological instruments. Four methods were used to estimate seepage: the Darcy, zero-flux plane, surface-based water-budget, and groundwater-based water-budget methods. Annual seepage estimates ranged from 48 to 216mm (5-23% of total precipitation), with most seepage occurring in spring. The Darcy method, although limited in accuracy by uncertainty in hydraulic conductivity, was capable of discretizing seepage in space and time and indicated that seepage varied by almost an order of magnitude across the width of the trench. Lowest seepage rates occurred near the center of the cover, where seepage was gradual. Highest rates occurred along the edge of the cover, where seepage was highly episodic, with 84% of the total there being traced to wetting fronts from 28 individual storms. Limitations of the zero-flux-plane method were severe enough for the method to be judged inappropriate for use in this study.

Illinois↗
USGS1996

Transverse dispersion of contaminants in fractured permeable formations

Our interest in understanding some of the mechanisms involved in the mineralization of the Great Bend Prairie aquifer of Kansas by salt water originating from Permian bedrock formations, which are fractured sandstones, has prompted this basic study. The fractured permeable formatiodis represented by a simplified conceptual model incorporating two sets of oblique and parallel fractures embedded in permeable blocks. The domain is initially divided into a completely freshwater zone overlying a completely saline water zone. However, the sharp interface originally existing between the saline and fresh water is subject to dispersion because of mixing in fracture intersections and between the fracture flow and the permeable block flow. Simulations based on the use of an appropriate numerical model developed in the present study have helped us to characterize dispersion of the sharp interface and creation of the transition zone. Relationships of transverse and longitudinal dispersion in the domain are also determined.

Journal of Hydrology↗
USGS1976

A note on the effect of fault gouge thickness on fault stability

At low confining pressure, sliding on saw cuts in granite is stable but at high pressure it is unstable. The pressure at which the transition takes place increases if the thickness of the crushed material between the sliding surfaces is increased. This experimental result suggests that on natural faults the stability of sliding may be affected by the width of the fault zone. ?? 1976.

International Journal of Rock Mechanics and Mining↗
USGS1996

Depositional controls on coal distribution and quality in the Eocene Brunner Coal Measures, Buller Coalfield, South Island, New Zealand

The Buller Coalfield on the West Coast of the South Island, New Zealand, contains the Eocene Brunner Coal Measures. The coal measures unconformably overlie Paleozoic-Cretaceous basement rocks and are conformably overlain by, and laterally interfinger with, the Eocene marine Kaiata Formation. This study examines the lithofacies frameworks of the coal measures in order to interpret their depositional environments. The lower part of the coal measures is dominated by conglomeratic lithofacies that rest on a basal erosional surface and thicken in paleovalleys incised into an undulating peneplain surface. These lithofacies are overlain by sandstone, mudstone and organic-rich lithofacies of the upper part of the coal measures. The main coal seam of the organic-rich lithofacies is thick (10-20 m), extensive, locally split, and locally absent. This seam and associated coal seams in the Buller Coalfield are of low- to high-volatile bituminous rank (vitrinite reflectance between 0.65% and 1.75%). The main seam contains a variable percentage of ash and sulphur. These values are related to the thickening and areal distribution of the seam, which in turn, were controlled by the nature of clastic deposition and peat-forming mire systems, marine transgression and local tidal incursion. The conglomeratic lithofacies represent deposits of trunk and tributary braided streams that rapidly aggraded incised paleovalleys during sea-level stillstands. The main seam represents a deposit of raised mires that initially developed as topogenous mires on abandoned margins of inactive braidbelts. Peat accumulated in mires as a response to a rise in the water table, probably initially due to gradual sea-level rise and climate, and the resulting raised topography served as protection from floods. The upper part of the coal measures consists of sandstone lithofacies of flu vial origin and bioturbated sandstone, mudstone and organic-rich lithofacies, which represent deposits of paralic (deltaic, barrier shoreface, tidal and mire) and marine environments. The fluvial sandstone lithofacies accumulated in channels during a sea-level stillstand. The channels were infilled by coeval braided and meandering streams prior to transgression. Continued transgression, ranging from tidal channel-estuarine incursions to widespread but uneven paleoshoreline encroachment, accompanied by moderate basin subsidence, is marked by a stacked, back-stepping geometry of bioturbated sandstone and marine mudstone lithofacies. Final retrogradation (sea-level highstand) is marked by backfilling of estuaries and by rapid landward deposition of the marine Kaiata Formation in the late Eocene.

International Journal of Coal Geology↗
USGS1987

Estimating threshold values for the land disposal of organic solvent-contaminated wastes

This paper describes conceptual and mathematical modeling approaches to evaluate environmentally suitable waste management practices that prevent ground water pollution from landfill disposal of solid wastes contaminated with organic solvents. Threshold values for disposal of solid wastes contaminated with acetone, nitrobenzene, chlorobenzene, and carbon tetrachloride were estimated using a disposal site model using a two-dimensional advection-,dispersion solute transport computer code. For example, the threshold value for disposal of carbon tetrachloride at the site model was approximately 600 g/acre, while the value for acetone was limited only by the characteristics of the waste to prevent free drainage of liquid solvent. The study indicated that the toxicity, mass loading rate, and the mass of solvent initially disposed are critical parameters determining the relative success of a given site to attenuate contaminants to environmentally acceptable levels.

Journal of Hazardous Materials↗
USGS1991

An analytical model for in situ extraction of organic vapors

This paper introduces a simple convective-flow model that can be used as a screening tool and for conducting sensitivity analyses for in situ vapor extraction of organic compounds from porous media. An assumption basic to this model was that the total mass of volatile organic chemicals (VOC) exists in three forms: as vapors, in the soil solution, and adsorbed to soil particles. The equilibrium partitioning between the vapor-liquid phase was described by Henry's law constants (K(H)) and between the liquid-soil phase by soil adsorption constants (K(d)) derived from soil organic carbon-water partition coefficients (K(oc)). The model was used to assess the extractability of 36 VOCs from a hypothetical site. Most of the VOCs appeared to be removable from soil by this technology, although modeling results suggested that rates for the alcohols and ketones may be very slow. In general, rates for weakly adsorbed compounds (K(oc) < 100 mL/g) were significantly higher when K(H) was greater than 10-4 atm??m3??mol-1. When K(oc) was greater than about 100 mL/g, the rates of extraction were sensitive to the amount of organic carbon present in the soil. The air permeability of the soil material (k) was a critical factor. In situ extraction needs careful evaluation when k is less than 10 millidarcies to determine its applicability. An increase in the vacuum applied to an extraction well accelerated removal rates but the diameter of the well had little effect. However, an increase in the length of the well screen open to the contaminated zone significantly affected removal rates, especially in low-permeability materials.This paper introduces a simple convective-flow model that can be used as a screening tool and for conducting sensitivity analyses for in situ vapor extraction of organic compounds from porous media. An assumption basic to this model was that the total mass of volatile organic chemicals (VOC) exists in three forms: as vapors, in the soil solution, and adsorbed to soil particles. The equilibrium partitioning between the vapor-liquid phase was described by Henry's law constants (KH) and between the liquid-soil phase by soil adsorption constants (Kd) derived from soil organic carbon-water partition coefficients (Koc). The model was used to assess the extractability of 36 VOCs from a hypothetical site. Most of the VOCs appeared to be removable from soil by this technology, although modeling results suggested that rates for the alcohols and ketones may be very slow. In general, rates for weakly adsorbed compounds (Koc < 100 mL/g) were significantly higher when KH was greater than 10-4atm-m3-mol-1. When Koc was greater than about 100 mL/g, the rates of extraction were sensitive to the amount of organic carbon present in the soil. The air permeability of the soil material (k) was a critical factor. In situ extraction needs careful evaluation when k is less than 10 millidarcies to determine its applicability. An increase in the vacuum applied to an extraction well accelerated removal rates but the diameter of the well had little effect. However, an increase in the length of the well screen open to the contaminated zone significantly affected removal rates, especially in low-permeability materials.

Journal of Hazardous Materials↗
USGS1981

The partitioning of copper among selected phases of geologic media of two porphyry copper districts, Puerto Rico

In experiments designed to determine the manner in which copper is partitioned among selected phases that constitute geologic media, we have applied the five-step sequential extraction procedure of Chao and Theobald to the analysis of drill core, soils, and stream sediments of the Rio Vivi and Rio Tanama porphyry copper districts of Puerto Rico. The extraction procedure affords a convenient means of determining the trace-metal content of the following fractions: (1) Mn oxides and “reactive” Fe oxides; (2) “amorphous” Fe oxides; (3) “crystalline” Fe oxides; (4) sulfides and magnetite; and (5) silicates. An additional extraction between steps (1) and (2) was performed to determine organic-related copper in stream sediments. The experimental results indicate that apportionment of copper among phases constituting geologic media is a function of geochemical environment. Distinctive partitioning patterns were derived from the analysis of drill core from each of three geochemical zones: (a) the supergene zone of oxidation; (b) the supergene zone of enrichment; and (c) the hypogene zone; and similarly, from the analysis of; (d) soils on a weakly leached capping; (e) soils on a strongly leached capping; and (f) active stream sediment. The experimental results also show that geochemical contrasts (anomaly-to-background ratios) vary widely among the five fractions of each sampling medium investigated, and that at least one fraction of each medium provides substantially stronger contrast than does the bulk medium. Fraction (1) provides optimal contrast for stream sediments of the district; fraction (2) provides optimal contrast for soils on a weakly leached capping; fraction (3) provides optimal contrast for soils on a strongly leached capping. Selective extraction procedures appear to have important applications to the orientation and interpretive stages of geochemical exploration. Further investigation and testing of a similar nature are recommended.

Puerto Rico↗
USGS1982

Uraniferous opal, Virgin Valley, Nevada: Conditions of formation and implications for uranium exploration

Uraniferous, fluorescent opal, which occurs in tuffaceous sedimentary rocks at Virgin Valley, Nevada, records the temperature and composition of uranium-rich solutions as well as the time of uranium-silica coprecipitation. Results are integrated with previous geologic and geochronologic data for the area to produce a model for uranium mobility that may be used to explore for uranium deposits in similar geologic settings. Uraniferous opal occurs as replacements of diatomite, or silicic air-fall ash layers in tuffaceous lakebeds of the Virgin Valley Formation (Miocene) of Merriam (1907). Fission-track radiography shows uranium to be homogeneously dispersed throughout the opal structure, suggesting coprecipitation of dissolved uranium and silica gel. Fluid inclusions preserved within opal replacements of diatomite have homogenization temperatures in the epithermal range and are of low salinity. Four samples of opal from one locality all have U-Pb apparent ages which suggest uraniferous opal precipitation in late Pliocene time. These ages correspond to a period of local, normal faulting, and highangle faults may have served as vertical conduits for transport of deep, thermalized ground water to shallower levels. Lateral migration of rising solutions occurred at intersections of faults with permeable strata. Silica and some uranium were dissolved from silica-rich host strata of 5–20 ppm original uranium content and reprecipitated as the solutions cooled. The model predicts that in similar geologic settings, ore-grade concentrations of uranium will occur in permeable strata that intersect high-angle faults and that contain uranium source rocks as well as efficient reductant traps for uranium. In the absence of sufficient quantities of reductant materials, uranium will be flushed from the system or will accumulate in low-grade disseminated hosts such as uraniferous opal.

Nevada↗
USGS1982

Hydrogeochemical prospecting for porphyry copper deposits in the tropical-marine climate of Puerto Rico

A hydrogeochemical survey utilizing waters from streams and springs was conducted in the area of two known porphyry copper deposits in the tropical-marine climate of westcentral Puerto Rico. The most important pathfinder for regional hydrogeochemical surveys is sulfate which reflects the associated pyrite mineralization. Because of increased mobility due to intense chemical weathering and the low pH environment, dissolved copper can also be used as a pathfinder for regional surveys and has the advantage of distinguishing barren pyrite from pyrite associated with copper mineralization. For follow-up surveys, the most important pathfinders are copper, sulfate, pH, zinc, and fluoride. High concentrations of dissolved copper and moderate concentrations of sulfate is a diagnostic indication of nearby sources of copper minerals. An understanding of the geochemical processes taking place in the streambeds and the weathering environment, such as the precipitation of secondary copper minerals, contributes to the interpretation of the geochemical data and the selection of the most favorable areas for further exploration.

Puerto Rico↗
USGS1984

A comparison of iron oxide-rich joint coatings and rock chips as geochemical sampling media in exploration for disseminated gold deposits

We evaluated the effectiveness of iron oxide-rich fracture coatings as a geochemical sampling medium for disseminated gold deposits, as compared with conventional lithogeochemical methods, for samples from the Pinson mine and Preble prospect in southeastern Humboldt County, Nevada. That disseminated gold mineralization is associated with Hg, As, and Sb is clearly demonstrated in these deposits for both fracture coatings and rock chip samples. However, the relationship is more pronounced for fracture coatings. Fracture coatings at Pinson contain an average of 3.61, 5.13, 14.37, and 3.42 times more Au, As, Sb and Hg, respectively, than adjacent rock samples. At Preble, fracture coatings contain 3.13, 9.72, 9.18, and 1.85 times more Au, As, Sb and Hg, respectively, than do adjacent rock samples. Geochemical anomalies determined from fracture coatings are thus typically more intense than those determined from rock samples for these elements. The sizes of anomalies indicated by fracture coatings are also somewhat larger, but this is less obvious. In both areas, Sb anomalies are more extensive in fracture coatings. At Preble, some Hg and Au anomalies are also more extensive in fracture coatings. In addition to halos formed by the Hg, As and Sb, high values for Au/Ag and Zn/(Fe + Mn) are closely associated with gold mineralization at the Pinson mine. The large enhancement in geochemical response afforded by fracture coatings indicates a definite potential in the search for buried disseminated gold deposits.

Journal of Geochemical Exploration↗
USGS1985

A comparative study of stream water and stream sediment as geochemical exploration media in the Rio Tanama porphyry copper district, Puerto Rico

To test the relative effectiveness of stream water and sediment as geochemical exploration media in the Rio Tanama porphyry copper district of Puerto Rico, we collected and subsequently analyzed samples of water and sediment from 29 sites in the rivers and tributaries of the district. Copper, Mo, Pb, Zn, SO 4 2− , and pH were determined in the waters; Cu, Mo, Pb, and Zn were determined in the sediments. In addition, copper in five partial extractions from the sediments was determined. Geochemical contrast (anomaly-to-background quotient) was the principal criterion by which the effectiveness of the two media and the five extractions were judged. Among the distribution patterns of metals in stream water, that of copper most clearly delineates the known porphyry copper deposits and yields the longest discernable dispersion train. The distribution patterns of Mo, Pb, and Zn in water show little relationship to the known mineralization. The distribution of SO 4 2− in water delineates the copper deposits and also the more extensive pyrite alteration in the district; its recognizable downstream dispersion train is substantially longer than those of the metals, either in water or sediment. Low pH values in small tributaries delineate areas of known sulfide mineralization. The distribution patterns of copper in sediments clearly delineate the known deposits, and the dispersion trains are longer than those of copper in water. The partial determinations of copper related to secondary iron and manganese oxides yield the strongest geochemical contrasts and longest recognizable dispersion trains. Significantly high concentrations of molybdenum in sediments were found at only three sites, all within one-half km downstream of the known copper deposits. The distribution patterns of lead and zinc in sediments are clearly related to the known primary lead-zinc haloes around the copper deposits. The recognizable downstream dispersion trains of lead and zinc are shorter than those of copper.

Journal of Geochemical Exploration↗
USGS1987

Geochemical studies in the Indian Pass and Picacho Peak Bureau of Land Management Wilderness study areas, imperial county, Southern California

The U.S. Geological Survey has conducted geochemical studies in the Indian Pass (CDCA-355), 124 km 2 , and Picacho Peak (CDCA-355A), 23 km 2 , Wilderness Study Areas (WSA's) as part of a program to evaluate the mineral resource potential of designated areas in the California Desert Conservation Area. These two WSA's are of particular interest because they lie within a region which has intermittently produced significant quantities of Au since the mid-1800's, and is currently the site of much exploration activity for additional Au resources. Within a 15-km radius of the WSA's, there is one actively producing gold mine, a major deposit which began production in 1986, and one recently announced discovery. In the reconnaissance geochemical surveys of the two WSA's - 177 μm (-80 mesh) stream sediments, heavy-mineral concentrates from stream sediments, and rocks were prepared and analyzed. Four areas of possible exploration interest were identified within the WSA's. The first area is characterized by anomalous W and Bi in nonmagnetic heavy-mineral concentrates, and is underlain primarily by the Mesozoic Orocopia Schist which has been intruded by monzogranite of Oligocene age. Alteration and mineralization appear to be localized near the intrusive contact. The mineralized rock at the surface contains secondary Cu and Fe minerals where the monzogranite intrudes the metabasite horizons of the Orocopia Schist and scheelite where the monzogranite intrudes marble within the Orocopia Schist.

Journal of Geochemical Exploration↗
USGS1989

Geochemistry of placer gold, Koyukuk-Chandalar mining district, Alaska

The Koyukuk-Chandalar mining district of the Brooks Range mineral belt in north-central Alaska contains numerous placer gold deposits but few known lode gold sources. Gold grains, collected from 46 placer localities and 6 lode gold sites in the district, were analyzed for Ag and 37 trace elements utilizing direct current-arc optical emission spectroscopy. When possible, several measurements were made on each sample and averaged. Gold content was calculated by the summation of the 38 elements determined and subtracting from 100. The objectives of our study were to characterize the deposits by defining the type and number of distinct geochemical characteristics for the Au, to determine relationships of Au in placer deposits to possible lode sources (placer and lode), to identify possible primary sources of placer gold, and to study processes of placer formation. Interpretation of results emphasize that the Au grains are almost invariably ternary (Au-Ag-Cu) alloys. The average Cu content is 0.040% and the average Ag content and fineness [(Au/Au+Ag)×1,000] are 10.5% and 893 parts per thousand, respectively, for the 46 placer localities.

Journal of Geochemical Exploration↗
USGS1989

Soil geochemistry of Mother Lode-type gold deposits in the Hodson mining district, central California, U.S.A.

The Hodson mining district is in the westernmost foothills of the Sierra Nevada in California, about 17 km west of the town of Angels Camp. This district is part of the West Gold Belt, which lies about 12-16 km west of, and generally parallel to, the better known Mother Lode Gold Belt in central California. The district produced several million dollars worth of Au between about 1890 and 1940. The geologic setting and mineral deposits in the West Gold Belt are generally similar to those in the Mother Lode Gold Belt. Rocks in the study area are of Jurassic age and consist of a mixture of (1) fine-grained, generally thin-bedded, clastic sedimentary rocks that have been metamorphosed to slates, schists, and phyllites, and (2) massive volcanic flows and welded tuffs that have been metamorphosed to metabasalts and metatuffs. All rocks were intensely faulted and folded during the Late Cretaceous Nevadan orogeny; northnorthwest- and northwest-trending faults dominate. Mining in the area was of low-grade gold-pyrite ores occurring principally in the carbonatized wall rocks adjacent to the major northwest-trending Hodson fault and its splays. Minor amounts of other sulfide minerals (principally chalcopyrite, arsenopyrite, sphalerite, and galena) are locally associated with the Au deposits.

California↗