Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “State of the Survey”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
USGS2019

The USGS National crustal model for seismic hazard studies: 2019 update

The United States Geological Survey (USGS) National Crustal Model (NCM) is being developed to assist in the modeling of seismic hazards across the conterminous United States, specifically by improving estimates of site response. The NCM is composed of geophysical profiles, extending from the Earth’s surface into the upper mantle, constructed from 5 primary elements: 1) depth to bedrock and basement; 2) 3D geologic framework; 3) petrologic and mineral physics database; 4) 3D temperature model; and 5) calibration of a porosity and attenuation model. Parameters needed to estimate site response for existing ground motion models (GMMs), including the time-averaged velocity in the upper 30 meters (VS30) and the depths to 1.0 and 2.5 km/s shear-wave velocity (Z1.0 and Z2.5), can be extracted from the NCM. As GMMs develop, other metrics could also be extracted or derived from the NCM such as fundamental frequency, a fully frequency-dependent site response function, or 3D geophysical volumes for wavefield simulations. Application of the NCM may also benefit other aspects of seismic hazard analysis including better accounting for path-dependent attenuation and geometric spreading and more accurate estimation of earthquake source properties such as hypocentral location and stress drop.

Conference Paper↗
USGS2014

Coal and petroleum resources in the Appalachian basin: index maps of included studies

This chapter B.1 of U.S. Geological Survey (USGS) Professional Paper 1708 provides index maps for many of the studies described in other chapters of the report. Scientists of the USGS and State geological surveys studied coal and petroleum resources in the central and southern Appalachian structural basins. In the southern Appalachian basin, studies focused on the coal-bearing parts of the Black Warrior basin in Alabama. The scientists used new and existing geologic data sets to create a common spatial geologic framework for the fossil-fuel-bearing strata of the central Appalachian basin and the Black Warrior basin in Alabama. Digital data have been compiled into a geographic information system (GIS) that is included in chapter I.1 (Trippi and others, this volume). Shape files and related metadata for features shown in the index maps of this chapter can be downloaded from chapter I.1. The study area for the Appalachian basin resource framework study includes the fossil-fuel-bearing strata of the following States (listed alphabetically): Alabama, Kentucky, Maryland, New York, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The outline of the study area is shown in figure 1; it differs from the boundary of the Appalachian Basin Province (Province 67) defined for the 1995 National Oil and Gas Assessment (NOGA) by the U.S. Geological Survey (1996a). The difference is that the study area includes regions where the Pennsylvanian coal-bearing strata crop out but does not include all of the oil- and gas-bearing strata of the Black Warrior basin, Alabama. The reasons for providing the index maps in this chapter are to show the locations of different studies, to give an overview of topics covered, and to help the user choose which chapter to read. Figures 1 and 2 show the study area outline and county names. Figure 3 shows oil and gas production in 1995 and 2005. Figure 4 shows locations of Upper Devonian sandstone oil and gas fields. Figure 5 shows major coal regions and coal fields. Figure 6 shows coal production by county. Figure 7 shows the locations of 10 cross sections of regional extent through the subsurface of the Appalachian basin. Figure 8 shows conodont alteration index sample locations and interpreted isograds for Ordovician rocks. Figure 9 shows vitrinite-reflectance data for Pennsylvanian coal in the Appalachian basin. Figure 10 shows the locations of coalbed-methane (CBM) assessment units in the study area, and figure 12 shows counties producing CBM. Figure 12 shows sulfur content of coal delivered to powerplants from coal-producing counties in the Appalachian basin and Black Warrior basin. Figure 13 shows locations of wells in Ohio and Pennsylvania where oil and gas were sampled in Lower Silurian reservoirs. Figure 14 shows the Conasauga-Rome/Conasauga Total Petroleum System and selected wells in the Rome trough in Kentucky and West Virginia having oil and gas production and shows. Figure 15 shows the locations of samples from Silurian reservoirs in Kentucky, New York, Ohio, Pennsylvania, and West Virginia; the samples yielded total organic carbon data. Figure 16 shows the locations of the Ben Hur and Rose Hill oil fields, Virginia, and the Swan Creek oil field, Tennessee. The one index map that is not shown is the areal extent of the shale gas plays in the basin. The extents of the plays can be found in Coleman and others (this volume, chap. G.13).

Appalachian basin↗
USGS2013

Archive of post-Hurricane Isabel coastal oblique aerial photographs collected during U.S. Geological Survey Field Activity 03CCH01 from Ocean City, Maryland, to Fort Caswell, North Carolina and Inland from Waynesboro to Redwood, Virginia, September 21 - 23, 2003

On September 21 - 23, 2003, the United States Geological Survey (USGS) conducted an oblique aerial photographic survey along the Atlantic coast from Ocean City, Md., to Fort Caswell, N.C., and inland oblique aerial photographic survey from Waynesboro to Redwood, Va., aboard a Navajo Piper twin-engine airplane. The coastal survey was conducted at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. For the inland photos, the aircraft tried to stay approximately 500 ft above the terrain. These coastal photos were used to document coastal changes like beach erosion and overwash caused by Hurricane Isabel, while the inland photos looked for potential landslides caused by heavy rains. The photos may also be used as baseline data for future coastal change analysis. The USGS and the National Aeronautics and Space Administration (NASA) surveyed the impact zone of Hurricane Isabel to better understand the changes in vulnerability of the Nation’s coasts to extreme storms (Morgan, 2009). This report serves as an archive of photographs collected during the September 21 - 23, 2003, post-Hurricane Isabel coastal and inland oblique aerial survey along with associated survey maps, KML files, navigation files, digital Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 03CCH01 tells us the data were collected in 2003 for the Coastal Change Hazards (CCH) study and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the ID number. The photographs provided here are Joint Photographic Experts Group (JPEG) scanned images of the analog 35 millimeter (mm) color positive slides. The photograph locations are estimates of the location of the plane (see the Navigation page). The metadata values for photo creation time, GPS latitude, GPS longitude, GPS position (latitude and longitude), keywords, credit, artist, caption, copyright, and contact were added to each photograph's EXIF header using EXIFtool (Subino and others, 2012). Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet, or, when viewing the Google Earth KML file, by clicking on the marker and then clicking on either the thumbnail or the link below the thumbnail. Nathaniel Plant (USGS - St. Petersburg, Fla.), and Ann Marie Ascough (formerly contracted at the USGS - St. Petersburg, Fla.) helped with the creation of KML files. To view the photos and survey maps, proceed to the Photos and Maps page.

Maryland, North Carolina, Virginia↗
USGS1954

Geologic interpretation of seismic data, relocation of Route 3: cut, stations 364-382 in Billerica, Mass.

Geologic and seismic studies were made of this site in October 1951, primarily for the purpose of obtaining data what would aid in establishing a grade for the proposed highway. A report on the geology of the site together with the interpretation of the seismic data that were obtained at this time was submitted by James E. Maynard and Robert M. Haslewood (file report of October 1952). Additional seismic work was performed at this site in Maroh 1953; Mr. M. E. Chandler, Engineer, Massachusetts Department of Public Works, operated seismic equipment at this time. This later work was done to obtain information that would augment the data of the preliminary survey sufficiently to permit estimates to be made of the quantities of materials to be excavated from the cut. This report contains the geologic interpretation of the supplementary seismic data that were obtained during the Maroh 1953 survey. The work was perfromed as a part of a cooperative project of the Massachusetts Department of Public Works and the United States Geological Survey.

Massachusetts↗
USGS1954

Geologic interpretation of seismic data, relocation of Route 3 at Route 62, northwest ramps and approach for Route 62 in Bedford, Mass.

Geologic and seismic studies were made at this site in October 1961 primarily for obtaining data that would aid in estimating the quantities of materials to be excavated from the cut required for the construction of Route 3. A report in the geology of the site together with the interpretation of the seismic data that were obtained at this time was submitted by Robert O. Castle and Robert M. Haslewood (file report of October 1951). Additional seismic work was performed at this site in July 1953. This later work was done to obtain information that would help in planning for the construction of the inner and outer loops of the northwest ramp, and the western approach of Route 62 to Route 3. This report contains the geologic interpretation of the supplementary seismic data that were obtained during the July 1953 survey. The work was performed as a part of a cooperative project of the Massachusetts Department of Public Works and the United States Geological Survey. Mr. M. E. Chandler and Mr. W. L. Carney, Department of Public Works' Engineers, performed all pertinent survey work required for this project, and prepared the essential plans and profiles. Mr. Chandler also operated the seismic equipment and assisted in the preparation of the seismic velocity data.

Massachusetts↗
USGS2023

National map of focus areas for potential critical mineral resources in the United States

Introduction The U.S. Geological Survey (USGS) launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the surface and subsurface geologic mapping of the United States, with a focus on identifying areas that may have the potential to contain critical mineral resources. EarthMRI can inform strategies to ensure secure and reliable domestic critical mineral supplies for the United States as mandated by Executive Order 13817 and the Infrastructure and Jobs Act of 2021 (Public Law 117–58, 135 Stat. 529). Earth MRI is a collaborative effort between the USGS and the State geological surveys as represented by the Association of American State Geologists to identify, prioritize, and acquire new geoscience data for geographic areas, or focus areas, across the Nation that have potential to host critical mineral resources. Mapping of focus areas was based on a framework of mineral systems and their associated mineral deposit types that could possibly host critical minerals. Using readily available geologic, geophysical, geochemical, and mineral deposit data, teams of USGS scientists worked with representatives of State geological surveys in a series of workshops to outline focus areas that contain evidence of key features for one or more mineral systems. These areas can be used to guide future efforts to collect new geologic, geophysical, geochemical, and topographic data that focus on critical minerals through Earth MRI.

Fact Sheet↗
USGS1999

Profiles of gamma-ray and magnetic data from aerial surveys over the conterminous United States

This publication contains images for the conterminous U.S. generated from geophysical data, software for displaying and analyzing the images, and software for displaying and examining the profile data from the aerial surveys flown as part of the National Uranium Resource Evaluation (NURE) Program of the U.S. Department of Energy. The images included are of gamma-ray data (uranium, thorium, and potassium channels), Bouguer gravity data, isostatic residual gravity data, aeromagnetic anomalies, topography, and topography with bathymetry.

conterminous United States↗
USGS2014

Part II—Geophysical investigations in the Hawaiian Islands

During 1938 and 1939, an extensive series of geophysical surveys, employing both resistivity and magnetic methods, have been carried on in the Hawaiian Islands by the Section of Geophysics of the United States Geological Survey in cooperation with the Division of Ground‐Water of the Survey and the Division of Hydrography of the Territorial Government (see Fig. 1). During this time, surveys have been conducted on the islands of Oahu, Molokai, and Maul. Two distinct types of ground‐water occurrence are being investigated: (1) The basal fresh‐water lens floating on underlying salt water in obedience to the Ghyben‐Herzberg principle (Fig. 2); and (2) perched ground‐water (Fig. 3) .

Hawaii↗
USGS2010

Effect of historic land cover change on runoff curve number estimation in Iowa

Within three decades of European-descended settlers arriving in Iowa, much of the land cover across the state was transformed from prairie and forest to farmland, patches of forest, and urbanized areas. Between 1832 and 1859, the General Land Office surveyed the state of Iowa to aid in the disbursement of land. In 1875, an illustrated atlas of the State of Iowa was published. Using these two data resources for classifying land cover, the hydrologic impact of the land cover change resulting from the first three decades of settlement is presented in terms of the effect on the area-weighted average curve number, a term commonly used to predict runoff from rainstorms. In the four watersheds studied, the area-weighted average curve number increased by a mean of 16.4 from 61.4 to 77.8 with the greatest magnitude of change occurring in the two western Iowa watersheds as opposed to the two more heavily forested eastern Iowa watersheds.

Iowa↗
USGS1950

Geologic interpretation of seismic data relocation Route 2, Littleton Road grade separation stations 243-252 in Harvard, Mass.

During parts of June and July 1949 nine seismic traverses were made at this site. Upon preliminary office development, the velocity data for some of these traverses were though to be inadequate and it was recommended that these lines be re-surveyed. Later surveys (March 1950), however, of nearby sites indicated that the original data were reliable and that a re-survey was unnecessary. The work was done as part of a cooperative program of the Massachusetts Department of Public Works and the United States Geological Survey.

Massachusetts↗
USGS1972

Mineral deposits of the northwestern Hijaz quadrangle, Kingdom of Saudi Arabia

A reconnaissance of portions of the Northwestern Hijaz quadrangle in the Kingdom of Saudi Arabia was made during 1964 and 1965 as part of a mineral survey of the Precambrian crystalline rocks of the country. The survey is being made under the terms of an agreement between the Saudi Arabia Ministry of Petroleum and Mineral Resources and the United States Geological Survey. Ancient gold and copper mines occur in the area, and deposits of iron minerals, chromite, copper minerals, asbestos, magnesite, gypsum, and glass sand have been discovered in recent years. The land surface of the quadrangle consists of a narrow coastal plain, a mountainous belt, and a plateau. The mountainous bolt is made up of Precambrian rocks that include three major stratigraphic units separated by unconformities. The two older units are slightly metamorphosed and are intruded by plutonic rocks of many kinds. Granitic rocks predominate but intrusions of syenite, diorite, gabbro, and peridotite are known. Dikes are abundant throughout the mountainous area. The Precambrian rocks have been folded on north- to northwest-trending axes. A major northwest-striking wrench fault zone crosses the central portion of the quadrangle. North-, northeast-, and east-trending faults are locally prominent. The plateau lies in the northeastern part of the quadrangle. It is made up of unmetamorphosed gently dipping sandstone of Paleozoic age overlain in part by flood basalts of Tertiary to Quaternary age. Sedimentary rocks of Miocene(?) age crop out in the coastal area. Gold was mined in the area during the eighth and ninth centuries A. D. The ancient gold mines were reexamined in the 1930s but wore found to be too small and too low grade for mining. Exploration for minerals other than gold began in 1950. The present work consisted of the examination of geological features that are potentially favorable for the presence of mineral deposits such as intrusive contacts, fault zones, quartz veins, and hydrothermally altered areas. Samples of wadi sediment were collected in areas that appeared most favorable. The samples were analyzed spectrographically for trace amounts of 27 elements to confirm the presence or absence of mineralization. Massive magnetite bodies that range in size from a few hundred to a few thousand tons wore discovered in the course of the work as well as widely scattered traces of secondary copper minerals. The wadi samples disclosed several areas that contain from 5 to 10 times the average trace amounts of base metals and molybdenum; these areas should be prospected in more detail.

Hijaz quadrangle↗
USGS2025

Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

Scientific Investigations Report↗
USGS1982

Utah water use data: Public water supplies, 1980

This publication is the third in a series of continuing reports presenting water use data for Utah. The data are collected by the State of Utah, Division of Water Rights, for the National Water Use Information Program. This is a cooperative effort with the U.S. Geological Survey. Most states contribute information in some form to the program.

Utah↗
USGS1982

Utah water use data: Public water supplies, 1981

This publication is the fourth in a series of continuing reports presenting water use data for Utah. The data are collected by the State of Utah, Division of Water Rights, for the National Water Use Information Program. This is a cooperative effort with the U.S. Geological Survey. Most states contribute information in some form to the program.

Utah↗
USGS1999

Cruise report; RV Coastal Surveyor Cruise C1-99; multibeam mapping of the Long Beach, California continental shelf; April 12 through May 19, 1999

The greater Los Angeles area of California is home to more than 10 million people. This large population puts increased pressure on the adjacent offshore continental shelf and margin with activities such as ocean disposal for dredged spoils, explosive disposal, waste-water outfall, and commercial fishing. The increased utilization of the shelf and margin in this area has generated accelerated multi-disciplinary research efforts in all aspects of the environment of the coastal zone. Prior to 1996 there were no highly accurate base maps of the continental shelf and slope upon which the research activities could be located and monitored. In 1996, the United States Geological Survey (USGS) Pacific Seafloor Mapping Project began to address this problem by mapping the Santa Monica shelf and margin (Fig. 1) using a state-of-the-art, high-resolution multibeam sonar system (Gardner, et al., 1996; 1999). Additional seafloor mapping in 1998 provided coverage of the continental margin from south of Newport to the proximal San Pedro Basin northwest of Palos Verdes Peninsula (Gardner, et al., 1998) (Fig. 1). The mapping of the seafloor in the greater Los Angeles continental shelf and margin was completed with a 30-day mapping of the Long Beach shelf in April and May 1999, the subject of this report. The objective of Cruise C-1-99-SC was to completely map the broad continental shelf from the eastern end of the Palos Verdes Peninsula to the narrow shelf south of Newport Beach, from the break in slope at about 120-m isobath to the inner shelf at about the 10-m isobath. Mapping the Long Beach shelf was jointly funded by the U.S. Geological Survey and the County of Orange (CA) Sanitation District and was conducted under a Cooperative Agreement with the Ocean Mapping Group from the University of New Brunswick (OMG/UNB). The OMG/UNB contracted with C&C Technologies, Inc. of Lafayette, LA for use of the RV Coastal Surveyor and the latest evolution of high-resolution multibeam sonars, a dual Kongsberg Simrad EM3000D.

California↗
USGS2016

Total cylindrospermopsins, microcystins/nodularins, and saxitoxins data for the 2007 United States Environmental Protection Agency National Lake Assessment

Phytoplankton communities in freshwater lakes, ponds, and reservoirs may be dominated by cyanobacteria (also called blue-green algae) under certain environmental conditions. Cyanobacteria may cause a range of water-quality impairments, including the potential for toxin production. Cyanobacteria toxins (cyanotoxins) may adversely impact human and ecological health. Microcystins are considered to be one of the most commonly found classes of cyanotoxins in freshwater ecosystems, and as such were selected as a recreational indicator of water quality for the 2007 United States Environmental Protection Agency (EPA) National Lakes Assessment. However, much less is known about the occurrence of other classes of cyanotoxins in fresh surface water such as anatoxins, cylindrospermopsins, nodularins, and saxitoxins. The 2007 National Lakes Assessment followed a probabilistic study design and was directed by the EPA, in partnership with States, Tribes, and other federal agencies of the United States, to provide an assessment of water quality in the Nation’s lakes, ponds, and reservoirs based on trophic status, and ecological and recreational indicators. Integrated photic zone samples were collected by the EPA, U.S. Geological Survey (USGS), States, and Tribes in target water bodies, generally at their deepest point, and analyzed for microcystins by the U.S. Geological Survey. The USGS assisted with this survey by providing technical expertise and enzyme linked immunosorbent assay (ELISA) analysis of microcystins for all survey samples as an indicator for recreational water quality. A small subset of samples ( n =27) was analyzed by liquid chromatography tandem mass spectrometry (LC/MS/MS) by the USGS. Additionally, through partnership with the EPA National Health and Environmental Effects Research Laboratory (NHEERL), USGS analyzed all frozen samples by ELISA for two other classes of cyanotoxins, cylindrospermopsins and saxitoxins. Total cylindrospermopsins, microcystins, and saxitoxins were measured by enzyme-linked immunosorbent assay in a total of 1,331 samples from 1,161 lakes. Samples from this study had detection frequencies of 4.0, 32 (unweighted), and 7.6 percent, mean concentrations (detections only) of 0.56, 3.0, and 0.061 micrograms/L (μg/L), and maximum concentrations of 4.4, 230, and 0.38 μg/L for cylindrospermopsins, microcystins, and saxitoxins by ELISA, respectively in visit 1 and visit 2 samples. Microcystin ELISA results were categorized based on World Health Organization recreational surface-water guidelines for the relative probability of adverse health impacts because of microcystin exposure. The dataset described in this report is the first ever national reconnaissance of cyanotoxins in the United States. At least one microcystin congener was detected by LC/MS/MS in 52 percent of the 27 samples analyzed at a concentration greater than the LC/MS/MS minimum reporting level (MRL) of 0.010 μg/L and included detections for microcystin-LA, microcystin-LR, microcystin-LY, microcystin-RR, and microcystin-YR. Anatoxin-a, cylindrospermopsin, and nodularin-R were detected in 15 percent, 7 percent, and 4 percent of samples, respectively, at concentrations above 0.010 μg/L. Deoxycylindrospermopsin, domoic acid, lyngbyatoxin-a, microcystin-LF, microcystin-LW, and okadaic acid were not detected in the LC/MS/MS subset.

Data Series↗