SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

USGS2016

Geologic map and cross sections of the Embudo Fault Zone in the Southern Taos Valley, Taos County, New Mexico

The southern Taos Valley encompasses the physiographic and geologic transition zone between the Picuris Mountains and the San Luis Basin of the Rio Grande rift. The Embudo fault zone is the rift transfer structure that has accommodated the kinematic disparities between the San Luis Basin and the Española Basin during Neogene rift extension. The eastern terminus of the transfer zone coincides with the intersection of four major fault zones (Embudo, Sangre de Cristo, Los Cordovas, and Picuris-Pecos), resulting in an area of extreme geologic and hydrogeologic complexities in both the basin-fill deposits and the bedrock. Although sections of the Embudo fault zone are locally exposed in the bedrock of the Picuris Mountains and in the late Cenozoic sedimentary units along the top of the Picuris piedmont, the full proportions of the fault zone have remained elusive due to a pervasive cover of Quaternary surficial deposits. We combined insights derived from the latest geologic mapping of the area with deep borehole data and high-resolution aeromagnetic and gravity models to develop a detailed stratigraphic/structural model of the rift basin in the southern Taos Valley area. The four fault systems in the study area overlap in various ways in time and space. Our geologic model states that the Picuris-Pecos fault system exists in the basement rocks (Picuris formation and older units) of the rift, where it is progressively down dropped and offset to the west by each Embudo fault strand between the Picuris Mountains and the Rio Pueblo de Taos. In this model, the Miranda graben exists in the subsurface as a series of offset basement blocks between the Ponce de Leon neighborhood and the Rio Pueblo de Taos. In the study area, the Embudo faults are pervasive structures between the Picuris Mountains and the Rio Pueblo de Taos, affecting all geologic units that are older than the Quaternary surficial deposits. The Los Cordovas faults are thought to represent the late Tertiary to Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.

New Mexico↗

USGS2018

New data yield new geologic insights at the Fallon FORGE site, Carson Sink Region, Nevada

The geologic structure beneath the Fallon Frontier Observatory for Research in Geothermal Energy (FORGE) site represents a record of the Mesozoic through Cenozoic tectonism, volcanism, and sedimentation that has affected the Carson Sink local to Fallon, NV. A robust dataset confirms that the lithologic sequence consists of Quaternary through Miocene sedimentary and volcanic rocks resting non-conformably on Mesozoic crystalline basement. The basement consists of four lithologic units; 1) Triassic-Jurassic low-to-medium grade meta-rhyolites, 2) Jurassic low-to-medium grade quartzites and other metamorphosed marine sedimentary rocks, and 3) Jurassic low-to-medium grade meta-basalt and -basaltic-andesite lavas, all intruded by 4) Jurassic-Cretaceous quartz monzonite. The geologic section dips ~20-25° west, tilting that was accommodated by a predominant system of north-to-north-northeast striking, east and west moderately-to-steeply dipping normal faults. The above, relatively broad-scale characteristics of the geologic framework of the Fallon site have been developed throughout the ~3 year duration of the project. With the collection of new data and re-analysis of existing data in Phase 2B of the Fallon FORGE project, our detailed understanding of the relatively finer-scale aspects of the geologic framework, including aspects of the stratigraphic sequence and the locations and attitudes of individual faults have evolved and an updated 3D geologic map has been developed. Here, we compare the Phase 1 3D geologic map to the Phase 2B 3D geologic map and demonstrate the evolution of our understanding of the geologic framework of the Fallon site and the value of the new data that was collected in Phase 2B in developing this updated framework.

Geothermal Resources Council Transactions↗

USGS2023

Tungsten resources of the northern Rocky Mountains, Montana and Idaho— A synthesis and quantitative assessment of skarn-hosted resources

Mineral resource assessments performed by the U.S. Geological Survey provide a synthesis of available information about the location of known and suspected mineral deposits. This study focuses on skarn-hosted tungsten resources in the northern Rocky Mountain region of east-central Idaho and western Montana which have seen moderate tungsten trioxide production in the past from a variety of mineralization styles including skarn, vein and replacement, and wolframite-quartz veins. The area’s geology is dominated by large Cretaceous and Tertiary plutons that are emplaced into a belt of Mesoproterozoic to Permian sedimentary rock and affected by tectonism related to the Sevier and later Laramide orogenies. Known tungsten skarn mineral sites are associated with contacts between Cretaceous plutons and calcareous and argillaceous sedimentary or metasedimentary rocks, including two skarn deposits in Montana (Calvert and Browns Lake) that are consistent with an updated grade and tonnage model. This study (1) delineates permissive tracts where undiscovered tungsten skarn deposits may occur within 1 kilometer of the surface; (2) presents a tungsten mineral site dataset from a variety of public sources; (3) evaluates currently available geochemical, geophysical, and radiometric age data in support of tract delineation; (4) provides probabilistic estimates of the amount of tungsten and tungsten-mineralized rock that could be contained in undiscovered deposits within one major tract; (5) estimates the value of total undiscovered deposits using economic filter analysis; and (6) provides a synthesis of metallogenic controls on regional tungsten skarn and granitoid-related mineral deposits. Two permissive tracts were delineated: the Great Falls tectonic zone (GFTZ)-Cretaceous tract, for which a quantitative assessment was performed, and the Bitterroot tract, which was assessed in a qualitative manner. The quantitative three-part assessment, conducted in August 2019, indicates that undiscovered tungsten resources might exist in skarn-type deposits within the study area. Using a negative binomial function, a mean of 4 undiscovered deposits was calculated from panel estimates. Simulation results that combine an updated grade and tonnage model with estimates of undiscovered deposits include the amounts of ore and contained tungsten trioxide at different levels of uncertainty. A mean of 250,000 metric tons and median of 200,000 metric tons contained tungsten trioxide was calculated for the undiscovered deposits within the GFTZ-Cretaceous tract. The value of undiscovered deposits was estimated using a new economic filter that considers factors such as mine type, deposit depth, deposit geometry, metallurgical recovery rate, cutoff grade, and tract area. A review of the regional Archean to Paleogene geology suggests that ore metal (copper, molybdenum, and tungsten) variations in intrusion-related deposits of Montana and Idaho may be controlled by a number of factors including the age and composition of underlying basement terranes, depth of emplacement, pluton chemistry and degree of fractionation, redox conditions, and aqueous fluid-melt partition coefficients.

Idaho, Montana↗

USGS2023

Preliminary geologic map of the Southern Santa Rosa Mountains and Borrego Badlands, San Diego County, Southern California

This investigation delineates the geologic framework of an area of 75 square kilometers (km 2 ) located west of the Salton Sea in southern California (fig. 1, on sheet 1). The study area encompasses the south flank of the Santa Rosa Mountains and the eastern part of the Borrego Badlands (sheet 1). In this study area, regionally important stratigraphic and structural elements collectively inform the late Cenozoic geologic evolution of the Anza-Borrego sector of the Salton Trough province. Critical stratigraphic and structural elements in the map area include the following: The well exposed sequence of late Cenozoic, nonmarine sedimentary rocks that filled the Anza-Borrego subbasin (fig. 1) of the Salton Trough; A tectonic boundary that—in the southern Santa Rosa Mountains—separates the sedimentary strata from underlying crystalline rocks of Peninsular Ranges type. This tectonic boundary, named the West Salton Detachment Fault System by Axen and Fletcher (1998), is projected to underlie all late Cenozoic sedimentary strata in the Anza-Borrego subbasin of the Salton Trough; A variety of transpressional, transtensional, and strike-slip structures that have deformed the late Cenozoic sedimentary strata and collectively guided syntectonic and posttectonic depositional events within the Anza-Borrego subbasin of the Salton Trough; and The southeasternmost surface expression of the Clark Fault, a major strand of the dextral San Jacinto Fault Zone. Geologic mapping and analysis for this investigation focused on clarifying geologic relations among these four stratigraphic and structural aspects in the map area.

California↗

USGS2021

A Bayesian nonparametric approach to unmixing detrital geochronologic data

Sedimentary deposits constitute the primary record of changing environmental conditions that have acted on Earth’s surface over geologic time. Clastic material is eroded from source locations (parents) in sediment routing systems and deposited at sink locations (children). Both parents and children have characteristics that vary across many different dimensions, including grain size, chemical composition, and the geochronologic age of constituent detrital minerals. During transport, sediment from different parents is mixed together to form a child, which in turn may serve as the parent for other sediment farther down-system or later in time when buried sediment is exhumed. The distribution of detrital mineral ages observed in parent and child sediments allows for investigation of the proportion of each parent in the child sediment, which reflects the properties of the sediment routing system. To model the proportion of dates in a child sample that comes from each of the parent distributions, we use a Bayesian mixture of Dirichlet processes. This model enables us to estimate the mixing proportions with associated uncertainty while making minimal assumptions. We also present an extension to the model whereby we reconstruct unobserved parent distributions from multiple observed child distributions using mixtures of Dirichlet processes. The model accounts for uncertainty in both the number of mineral formation events that constitute each parent distribution and the mixing proportions of each parent distribution that constitutes a child distribution. To demonstrate the model, we perform analyses using simulated data where the true age distribution is known as well as using a real-world case study from the coast of central California, USA.

Mathematical Geosciences↗

USGS2002

Spatial and temporal distribution of contaminated, effluent-affected sediment on the Palos Verdes margin, southern California

A sedimentary deposit on the continental margin near the Palos Verdes Peninsula, California is comprised of sewage effluent and geologic materials and is contaminated with metals, pesticides (including DDT and associated compounds), and PCBs. The deposit was mapped with subbottom acoustic profilers, and sediment cores were analyzed for geochemical and physical properties to determine the volume of the deposit and the distribution and mass of contaminants. Mapping showed that the deposit ranges up to 60-cm thick, has a total volume exceeding 9 million m3, and covers over 40 km2. Virtually the entire effluent-affected deposit is contaminated with DDT and PCBs. Nearly half of the area of the deposit lies on the continental slope, but 70-75% of the volume of the deposit and total mass of DDT reside on the continental shelf. Analysis of data collected biennially since 1981 by the Sanitation Districts of Los Angeles County show that the mass of DDT has apparently decreased at some stations but has remained essentially constant at others. Temporal changes m mass per unit area of DDT are not statistically significant (at the 90% confidence level) at the most contaminated locations over a 16-yr period. The results of this mapping effort were used as a basis for modeling efforts described elsewhere in this issue.

California↗

USGS1998

Controls on the distribution and isotopic composition of helium in deep ground-water flows

The distribution and isotopic composition of helium in sedimentary basins can be used to interpret the ages of very old ground waters. The piston-flow model commonly used in such interpretation, however, does not account for several important factors and as such works well only in very simple flow regimes. In this study of helium transport in a hypothetical sedimentary basin, we develop a numerical model that accounts for the magnitude and distribution of the basal helium flux, hydrodynamic dispersion, and complexities in flow regimes such as subregional flow cells. The modeling shows that these factors exert strong controls on the helium distribution and isotopic composition. The simulations may provide a basis for more accurate interpretations of observed helium concentrations and isotopic ratios in sedimentary basins.

Geology↗

USGS2009

Hydrothermal processes above the Yellowstone magma chamber: Large hydrothermal systems and large hydrothermal explosions

Hydrothermal explosions are violent and dramatic events resulting in the rapid ejection of boiling water, steam, mud, and rock fragments from source craters that range from a few meters up to more than 2 km in diameter; associated breccia can be emplaced as much as 3 to 4 km from the largest craters. Hydrothermal explosions occur where shallow interconnected reservoirs of steam- and liquid-saturated fluids with temperatures at or near the boiling curve underlie thermal fields. Sudden reduction in confining pressure causes fluids to flash to steam, resulting in significant expansion, rock fragmentation, and debris ejection. In Yellowstone, hydrothermal explosions are a potentially significant hazard for visitors and facilities and can damage or even destroy thermal features. The breccia deposits and associated craters formed from hydrothermal explosions are mapped as mostly Holocene (the Mary Bay deposit is older) units throughout Yellowstone National Park (YNP) and are spatially related to within the 0.64-Ma Yellowstone caldera and along the active Norris-Mammoth tectonic corridor. In Yellowstone, at least 20 large (>100 m in diameter) hydrothermal explosion craters have been identified; the scale of the individual associated events dwarfs similar features in geothermal areas elsewhere in the world. Large hydrothermal explosions in Yellowstone have occurred over the past 16 ka averaging ~1 every 700 yr; similar events are likely in the future. Our studies of large hydrothermal explosion events indicate: (1) none are directly associated with eruptive volcanic or shallow intrusive events; (2) several historical explosions have been triggered by seismic events; (3) lithic clasts and comingled matrix material that form hydrothermal explosion deposits are extensively altered, indicating that explosions occur in areas subjected to intense hydrothermal processes; (4) many lithic clasts contained in explosion breccia deposits preserve evidence of repeated fracturing and vein-filling; and (5) areal dimensions of many large hydrothermal explosion craters in Yellowstone are similar to those of its active geyser basins and thermal areas. For Yellowstone, our knowledge of hydrothermal craters and ejecta is generally limited to after the Yellowstone Plateau emerged from beneath a late Pleistocene icecap that was roughly a kilometer thick. Large hydrothermal explosions may have occurred earlier as indicated by multiple episodes of cementation and brecciation commonly observed in hydrothermal ejecta clasts. Critical components for large, explosive hydrothermal systems include a water-saturated system at or near boiling temperatures and an interconnected system of well-developed joints and fractures along which hydrothermal fluids flow. Active deformation of the Yellowstone caldera, active faulting and moderate local seismicity, high heat flow, rapid changes in climate, and regional stresses are factors that have strong influences on the type of hydrothermal system developed. Ascending hydrothermal fluids flow along fractures that have developed in response to active caldera deformation and along edges of low-permeability rhyolitic lava flows. Alteration of the area affected, self-sealing leading to development of a caprock for the hydrothermal system, and dissolution of silica-rich rocks are additional factors that may constrain the distribution and development of hydrothermal fields. A partial low-permeability layer that acts as a cap to the hydrothermal system may produce some over-pressurization, thought to be small in most systems. Any abrupt drop in pressure initiates steam flashing and is rapidly transmitted through interconnected fractures that result in a series of multiple large-scale explosions contributing to the excavation of a larger explosion crater. Similarities between the size and dimensions of large hydrothermal explosion craters and thermal fields in Yellowstone may indicate that catastrophic events which result in large hydrothermal explosions are an end phase in geyser basin evolution. The Mary Bay hydrothermal explosion crater complex is the largest such complex in Yellowstone, and possibly in the world, with a diameter of 2.8 km in length and 2.4 km in width. It is nested in Mary Bay in the northern basin of Yellowstone Lake, an area of high heat flow and active deformation within the Yellowstone caldera. A sedimentary sequence exposed in wave-cut cliffs between Storm Point and Mary Bay gives insight into the geologic history of the Mary Bay hydrothermal explosion event. The Mary Bay explosion breccia deposits overlie sand above varved lake sediments and are separated locally into an upper and lower unit. The sand unit contains numerous small normal faults and is coextensive with the Mary Bay breccia in its northern extent. This sand may represent deposits of an earthquake-generated wave. Seismicity associated with the earthquake may have triggered the hydrothermal explosion responsible for development of the Mary Bay crater complex. Large hydrothermal explosions are rare events on a human time scale; however, the potential for additional future events of the sort in Yellowstone National Park is not insignificant. Based on the occurrence of large hydrothermal explosion events over the past 16,000 yr, an explosion large enough to create a 100-m-wide crater might be expected every 200 yr.

Wyoming↗

USGS2006

Magnetotelluric data collected near geophysically logged boreholes in the Española and Middle Rio Grande Basins, New Mexico

The Santa Fe region is growing rapidly. The Santa Fe Group aquifer in the Española Basin is the main source of municipal water for the region, and water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's ground-water resources. An important issue in managing the ground-water resources is a better understanding of the hydrogeology of the Tertiary Santa Fe Group. The Santa Fe Group includes the sedimentary deposits that fill the Rio Grande rift and contain the principal ground-water aquifers. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the Española Basin in northern New Mexico. Detailed geologic mapping, high-resolution airborne magnetic surveys, electromagnetic surveys, and hydrologic, lithologic, and hydro-geochemical data are being used to better understand the aquifer systems. Magnetotelluric (MT) surveys were completed as part of these studies. The primary purpose of the MT surveys was to map changes in electrical resistivity with depth that are related to differences in various rock types that help control the properties of aquifers in the region. Resistivity modeling of the MT data can be used to investigate buried structures related to the basic geologic framework of the study area. The purpose of this report is to release MT sounding data collected near geophysically logged boreholes in the study area, including the nearby Middle Rio Grande Basin. This MT data can be used in subsequent resistivity modeling. No interpretation of the data is included in this report.

New Mexico↗

USGS2007

Magnetotelluric Data, Southern San Luis Valley, Colorado

Introduction The population of the San Luis Valley region is growing rapidly. The shallow unconfined and the deeper confined Santa Fe Group aquifer in the San Luis Basin is the main sources of municipal water for the region. Water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's ground-water resources. An important issue in managing the ground-water resources is a better understanding of the hydrogeology of the Santa Fe Group and the nature of the sedimentary deposits that fill the Rio Grande rift, which contain the principal ground-water aquifers. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the San Luis Basin located in southern Colorado. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, an electromagnetic survey, called magnetotellurics (MT), and hydrologic and lithologic data are being used to better understand the aquifer systems. The primary goal of the MT survey is to map changes in electrical resistivity with depth that are related to differences in rock type. These various rock types help control the properties of aquifers in the region. This report does not include any interpretation of the data. Its purpose is to release the MT data acquired at the 22 stations shown in figure 1.

Open-File Report↗

USGS1996

Drilling and construction data for well 3-3407-37, Kiikii exploratory well, Oahu, Hawaii

The Kiikii exploratory well (State well number 3-3407-37) was drilled about 1.4 miles southwest of the town of Haleiwa and 4,000 feet west- southwest of Weed Circle. The well is on agricultural land in the Waialua ground-water area. The well penetrates through sedimentary deposits (caprock) and into the underlying basalt aquifer. Well-construction data, logs of drilling notes, and geologic descriptions for the samples are presented for the well. The well is one of 12 exploratory wells drilled in the north-central Oahu area between July, 1993 and May, 1994 in cooperation with the Honolulu Board of Water Supply.

Open-File Report↗

USGS2018

Isostatic gravity map of Mountain Pass and vicinity, California and Nevada

Gravity investigations of Mountain Pass and vicinity were begun as part of an effort to study regional crustal structures as an aid to understanding the geologic framework and mineral resources of the eastern Mojave Desert. The study area, which straddles the state boundary between southeastern California and southern Nevada, encompasses Mountain Pass, which is host to one of the world’s largest rare earth element carbonatite deposits. The deposit is found along a north-northwest-trending, fault-bounded block that extends along the eastern parts of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains. This Paleoproterozoic block is composed of a 1.7-Ga metamorphic complex of gneiss and schist that underwent widespread metamorphism and associated plutonism during the Ivanpah orogeny. The Paleoproterozoic rocks were intruded by a Mesoproterozoic (1.4 Ga) ultrapotassic alkaline intrusive suite and carbonatite body. The intrusive rocks include, from oldest to youngest, shonkinite, mesosyenite, syenite, quartz syenite, potassic granite, carbonatite, carbonatite dikes, and late shonkinite dikes. Generally speaking, gravity anomalies can be used to infer subsurface geologic structure, revealing variations in lithology and delineating features such as faults, plutons, volcanic centers, calderas, and deep sedimentary basins. As part of this study, gravity data from more than 2,400 stations were collected and processed to identify lateral changes in subsurface density. Gravity stations were distributed across parts of Shadow Valley, Clark Mountain Range, Mescal Range, Ivanpah Mountains, and Ivanpah Valley. The new gravity data were combined with preexisting gravity data from the surrounding areas in California and Nevada. All gravity data were gridded using a minimum curvature algorithm at an interval of 200 m, and the result is displayed as a color-contour isostatic gravity map.

California, Nevada↗

USGS1952

Preliminary report on the White Canyon area, San Juan county, Utah

The White Canyon area, in the central part of San Juan County, Utah, consists of approximately two 15-minute quadrangles. Approximately 75 square miles have been mapped by the Geological Survey on a scale of 1 inch equals 1 mile, using a combined aerial photography-plane table method. Structure contours were drawn on top of the Organ Rock member of the Cutler formation. Parts of the Gonway and North Point claims, 1/4 mile east of the Happy Jack mine, were mapped in detail. The principal objectives of the investigations were: (1) to establish ore guides; (2) to select areas favorable for exploration; and (3) to map the general geology and to determine the regional relationships of the uranium deposits. The White Canyon area is comprised of sedimentary rocks of Carboniferous to Jurassic age, more than 2,000 feet thick, having a regional dip of 1° to 2° SW. The nearest igneous rocks are in the Henry Mountains about 7 miles west of the northern part of the area; The Shinarump conglomerate of the late Triassic age, the principal ore horizon in the White Canyon area, consists of lenticular beds of sandstone, conglomeratic sandstone, conglomerate, clay, and siltstone. The Shinarump conglomerate, absent in places, is as much as 75 feet thick. The sandstones locally contain molds of logs and fragments of altered volcanic ash. Some of the logs have been replaced by copper and uranium minerals and iron oxides. The clay and siltstone underlie and are interbedded with the sandstone, and are most common in channels that cut into the underlying Moenkopi formation. The Shinarump conglomerate contains reworked Moenkopi siltstone fragments, clay balls, carbonized wood, and pebbles of quarts, quartzite, and chert. Jointing is prominent in the Western part of the mapped area. The three most prominent joint trends are due east, N. 65°-75° W., and N. 65°-75° E. All joints have vertical dips. The red beds are bleached along some joints, especially those that trend N. 65°-75° W. All uranium ore produced has been from the lower part of the Shinarump conglomerate, where it commonly occurs with copper as disseminations and fracture coatings in sandstone. Uranium and copper minerals also occur in low-grade disseminated deposits in the lower Chinle and in the Moenkopi formation and in veins cutting these formations. Although some uranium deposits occur in Chinarump channels and scours, copper and uranium minerals along fractures suggest that channel control may be secondary. Logs and clay balls apparently have exerted some chemical influences for deposition. The uranium occurs as the oxide in some deposits, and as secondary hydrous sulfates, phosphates, oxides, and silicates in these and several other deposits. Charcoal, iron and manganese oxides, and veinlets of hydrocarbon are abnormally radioactive in most of the deposits. Base-metal sulfides are commonly found inside the oxidized zone. Secondary copper minerals include the hydrous sulfates and carbonate. Gangue minerals include quarts, clay minerals, and manganese oxides, dickite (?), calcite, gypsum, pyrite, and chalcedony (?). Principal wall-rock alteration appears to have been silicification, clay alteration, and bleaching. Most of the shipped ore has contained more than 0.3 percent uranium. The ore also contains copper, commonly in grades lower than 1.0 percent. Criteria believed to be most useful for prospecting for concealed uranium deposits are (1) visible uranium minerals; (2) sulfide minerals; (3) secondary copper minerals; (4) dickite (?); (5) hydrocarbons; and (6) bleaching and alteration of the Moenkopi formation.

Utah↗

USGS2012

Carbon export by rivers draining the conterminous United States

Material exports by rivers, particularly carbon exports, provide insight to basin geology, weathering, and ecological processes within the basin. Accurate accounting of those exports is valuable to understanding present, past, and projected basin-wide changes in those processes. We calculated lateral export of inorganic and organic carbon (IC and OC) from rivers draining the conterminous United States using stream gaging and water quality data from more than 100 rivers. Approximately 90% of land area and 80% of water export were included, which enabled a continental-scale estimate using minor extrapolation. Total carbon export was 41–49 Tg C yr −1 . IC was >75% of export and exceeded OC export in every region except the southeastern Atlantic seaboard. The 10 largest rivers, by discharge, accounted for 66% of water export and carried 74 and 62% of IC and OC export, respectively. Watershed carbon yield for the conterminous United States was 4.2 and 1.3 g C m −2 yr −1 for IC and OC, respectively. The dominance of IC export was unexpected but is consistent with geologic models suggesting high weathering rates in the continental United States due to the prevalence of easily weathered sedimentary rock.

Inland Waters↗

USGS1996

Remote mineralogic and lithologic mapping of the Ice River alkaline complex, British Columbia, Canada, using AVIRIS data

The Ice River Alkaline Complex is a late Paleozoic intrusion of mafic alkaline rocks, syenite, and carbonatite exposed in southeastern British Columbia, Canada. The complex intrudes Cambrian and Ordovician shales, slates, and limestones of the Chancellor and Ottertail Formations and the McKay Group. We examined the alkaline complex and adjacent country rocks using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) data. The data were first calibrated to relative reflectance and then used to spectrally map mineralogies in the study area by using a linear spectral unmixing program. This technique models each pixel spectrum in an AVIRIS image as a linear combination of unique endmember spectra. We selected endmember spectra from well-exposed and spectrally distinct mineralogic units, vegetation, and snow. Four of the endmembers reflect mineralogic variations within the McKay group in the study area, and may represent lateral and vertical variations of sedimentary or metamorphic facies. Otherwise, the resultant spatial distribution of endmembers shows generally close agreement with the published geologic map, although, in several places, our image-map is more accurate than the published map.

Photogrammetric Engineering and Remote Sensing↗

USGS2012

3-D reconstructions of subsurface Pleistocene basalt flows from paleomagnetic inclination data and 40 Ar/ 39 Ar ages in the southern part of the Idaho National Laboratory (INL), Idaho (USA)

The U. S. Geological Survey, in cooperation with the U.S. Department of Energy, is mapping the distribution of basalt flows and sedimentary interbeds at the Idaho National Laboratory in three dimensions to provide data for refining numerical models of groundwater flow and contaminant transport in the eastern Snake River Plain aquifer. Paleomagnetic inclination and polarity data from basalt samples from 47 coreholes are being used to create a three-dimensional (3-D) model of the subsurface of the southern part of the INL. Surface and sub-surface basalt flows can be identified in individual cores and traced in three dimensions on the surface and in the subsurface for distances of more than 20 km using a combination of paleomagnetic, stratigraphic, and 40 Ar/ 39 Ar data. Eastern Snake River Plain olivine tholeiite basalts have K 2 O contents of 0.2 to 1.0 weight per cent. In spite of the low-K content, high-precision 40 Ar/ 39 Ar ages were obtained by applying a protocol that employs short irradiation times (minimizing interferences from Ca derived 36 Ar), frequent measurement of various size atmospheric Ar pipettes to monitor and correct for temporal variation, and signal size dependent nonlinearity in spectrometer mass bias, resulting in age dates with resolution generally between 2 to 10% of the age. 3-D models of subsurface basalt flows are being used to: (1) Estimate eruption volumes; (2) locate the approximate vent areas and extent of sub-surface flows; and (3) Help locate high and low transmissivity zones. Results indicate that large basalt eruptions (>3 km 3 ) occurred at and near the Central Facilities Area between 637 ka and 360 ka; at and near the Radioactive Waste Management Complex before 540 ka; and north of the Naval Reactors Facility at about 580 ka. Since about 360 ka, large basalt flows have erupted along the Arco-Big Southern Butte Volcanic Rift Zone and the Axial Volcanic Zone, and flowed northerly towards the Central Facilities Area. Basalt eruptions shifted the course of the Big Lost River from a more southerly course to its present one.

Idaho↗

USGS2000

Airborne electromagnetics (EM) as a three-dimensional aquifer-mapping tool

The San Pedro River in southeastern Arizona hosts a major migratory bird flyway, and was declared a Riparian Conservation Area by Congress in 1988. Recharge of the adjacent Upper San Pedro Valley aquifer was thought to come primarily from the Huachuca Mountains, but the U. S. Army Garrison of Fort Huachuca and neighboring city of Sierra Vista have been tapping this aquifer for many decades, giving rise to claims that they jointly threatened the integrity of the Riparian Conservation Area. For this reason, the U. S. Army funded two airborne geophysical surveys over the Upper San Pedro Valley (see figure 1), and these have provided us valuable information on the aquifer and the complex basement structure underlying the modern San Pedro Valley. Euler deconvolution performed on the airborne magnetic data has provided a depth-to-basement map that is substantially more complex than a map obtained earlier from gravity data, as would be expected from the higher-resolution magnetic data. However, we found the output of the Euler deconvolution to have "geologic noise" in certain areas, interpreted to be post-Basin-and-Range Tertiary volcanic flows in the sedimentary column above the basement but below the ground surface.

Arizona↗

USGS1987

Passive margins: U.S. Geological Survey Line 19 across the Georges Bank basin

Georges Bank is a shallow part of the Atlantic continental shelf southeast of New England (Emery and Uchupi, 1972, 1984). This bank, however, is merely the upper surface of several sedimentary basins overlying a block-faulted basement of igneous and metamorphic crystalline rock. Sedimentary rock forms a seaward-thickening cover that has accumulated in one main depocenter and several ancillary depressions, adjacent to shallow basement platforms of paleozoic and older crystalline rock. Georges Bank basin contains a thickness of sedimentary rock greater than 10 km, whereas the basement platforms that flank the basin are areas of thin sediment accumulation (less than 5 km).

AAPG Studies in Geology↗