SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

USGS1976

Ground-water resources and geology of Walworth County, Wisconsin

Population growth in Walworth County, Wisconsin, requires an increasing amount of ground water. Good quality water is available from the sand-and gravel, Niagara, Galena-Platteville, and sandstone aquifers in the county. As much as 15 gallons per minute (0.95 liters per second) can be obtained from individual wells almost everywhere in the county. Well yields of 1,000 gallons per minute (63 liters per second) are available from glacial drift where it contains sufficient thickness of saturated sand and gravel. The sand-and-gravel aquifer is an important source of municipal water. Estimated well yields from most of the Niagara aquifer, a Silurian age dolomite as thick as 125 feet (38.1 meters), exceed 100 gallons per minute (6.3 liters per second). The Niagara aquifer occurs in the eastern third of the county. The Galena-Platteville aquifer, chiefly dolomite, is present in the western half of the county where it is as thick as 325 feet (99.1 meters). Estimated yields from this aquifer exceed 500 gallons per minute (32 liters per second). The sandstone aquifer underlies the entire county and ranges from less than 800 feet (240 meters) thick in the northwest corner to more than 2,200 feet (670 meters) in the east. This aquifer is capable of yielding 1,000 gallons per minute (63 liters per second) to individual wells and is a principal source of municipal water.

Wisconsin↗

USGS1999

Mining geology of the Pond Creek seam, Pikeville Formation, Middle Pennsylvanian, in part of the Eastern Kentucky Coal Field, USA

The Pond Creek seam is one of the leading producers of coal in the Eastern Kentucky Coal Field. The geologic factors that affect mining were investigated in several underground mines and categorized in terms of coal thickness, coal quality, and roof control. The limits of mining and thick coal are defined by splitting along the margin of the coal body. Within the coal body, local thickness variation occurs because of (1) leader coal benches filling narrow, elongated depressions, (2) rider coal benches coming near to or merging with the main bench, (3) overthrust coal benches being included along paleochannel margins, (4) cutouts occuring beneath paleochannels, and (5) very hard and unusual rock partings occuring along narrow, elongated trends. In the study area, the coal is mostly mined as a compliance product: sulfur contents are less than 1% and ash yields are less than 10%. Local increases in sulfur occur beneath sandstones, and are inferred to represent post-depositional migration of fluids through porous sands into the coal. Run-of-mine quality is also affected by several mine-roof conditions and trends of densely concentrated rock partings, which lead to increased in- and out-of-seam dilution and overall ash content of the mined coal. Roof control is largely a function of a heterolithic facies mosaic of coastal-estuarine origin, regional fracture trends, and unloading stress related to varying mine depth beneath the surface. Lateral variability of roof facies is the rule in most mines. The largest falls occur beneath modern valleys and parallel fractures, along paleochannel margins, within tidally affected 'stackrock,' and beneath rider coals. Shale spalling, kettlebottoms, and falls within other more isolated facies also occur. Many of the lithofacies, and falls related to bedding weaknesses within or between lithofacies, occur along northeast-southwest trends, which can be projected in advance of mining. Fracture-related falls occur independently of lithofacies trends along northwest-southeast trends, especially beneath modern valleys where overburden thickness decreases sharply. Differentiating roof falls related to these trends can aid in predicting roof quality in advance of mining.The Pond Creek-Lower Elkhorn seam has been an important exploration target because it typically has very low sulfur contents and ash yields. Geologic research in several large Pond Creek mines suggested variability in roof quality and coal thickness. Due to mine access, geologic problems encountered during mining are documented and described.

International Journal of Coal Geology↗

USGS1993

Historical saturated thickness of the Edwards-Trinity aquifer system and selected contiguous hydraulically connected units, west-central Texas

The Edwards-Trinity Regional Aquifer-System Analysis (RASA) is one of 25 completed or ongoing studies conducted by the U.S. Geological Survey on regional aquifer systems that individually provide essential quantities of ground water to large parts of the country. Underlying about 42,000 mi 2 of west-central Texas, the Edwards-Trinity aquifer system extends approximately from Atascosa County in the southeast to Culberson County in the northwest and from the Rio Grande in the southwest to the Colorado River in the northeast (sheet 2). The Edwards-Trinity aquifer system spans four geographic subareas: Trans-Pecos, Edwards Plateau, Hill Country, and Balcones fault zone (fig. 1). The names of all aquifers in the study area were adopted for RASA purposes directly from nomenclature mandated by the Texas Water Plan (Texas Water Development Board, 1990). The Cretaceous rocks that compose the Edwards-Trinity aquifer system are primarily limestone and dolomite rock, with lesser quantities of terrigenous sand. Although the lithology varies locally and the rocks are not everywhere permeable in all directions, they combine to form a single regional aquifer system. The aquifer system comprises three aquifers and two confining units (figs. 2 and 3). The water-yielding units are the Edwards aquifer of the Balcones fault zone, the Trinity aquifer of the Balcones fault zone and Hill Country, and the Edwards-Trinity aquifer of the Edwards Plateau and Trans-Pecos. The confining units are the Hammett confining unit, which confines basal parts of the Trinity aquifer in the Hill Country and the Edwards-Trinity aquifer in the eastern part of the Edwards Plateau, and the Navarro-Del Rio confining unit, which confines the Edwards and Trinity aquifers along the southeastern margin of the Balcones fault zone. Parts of the aquifer system not overlain by one of these confining units are unconfined, or nearly so. The purposes of this report are to illustrate the historical distribution of saturated thickness (hereafter referred to as the saturated thickness) in the Edwards-Trinity aquifer system, summarize the reasons for the variation in the saturated thickness, and relate the regional effects of this variation to the distribution of transmissivity. The saturated thickness map (sheet 2) was determined for most of the area by subtracting the altitude of the base of the aquifer system (Barker and Ardis, 1992) from the altitude of the historical potentiometric surface (Bush and others, 1993). Where the Edwards and Trinity aquifers are confined in the Balcones fault zone, the saturated thickness is defined by the thickness of the aquifer system, which was determined by subtracting the altitude of the base of the aquifer system from the altitude of the base of the Navarro-Del Rio confining unit (G.E. Groschen and W.G. Stein, U.S. Geological Survey, written commun, 1990).

Texas↗

USGS1970

(ORB II-2 (100)) Geologic map of the Maskelyne DA region of the moon, Lunar Orbiter site II P-2, southeastern Mare Tranquillitatis including Apollo landing site l

This map shows the geology in and around potential early Apollo landing site 1 in the lunar equatorial belt. The Maskelyne DA region, at the southeastern edge of the Mare T ranquillitatis , is in the area transitional between mare and terra. Patches of typical terra material occur on northwest-trending ridges , and typical heavily cratered mare materials occurs only in the east-central part of the region. The terrain in the rest of the region, including the potential landing site, is exceptionally smooth and deficient in craters more than 50 m (meters) in diameter. A large cratered dome, possibly indicative of late-stage volcanism , o ccurs in the southern part of the region. Telescopically, the terrain over most of the region resembles that of mare areas with intermediate albedo; hence, at a scale of 1:1,000,000 the materials here were mapped as unit Ipm2 of the Procellarum Group ( Wilhelms , 1965).

IMAP↗

USGS1952

Magnetite deposits and magnetic anomalies of the Brandy Brook and Silver Pond belts, St. Lawrence County, New York

This report sets forth the geology and economic possibilities of the Brandy Brook and Silver Pond belts of magnetic anomalies, Cranberry Lake quadrangle, St. Lawrence County, northwestern New York. each belt contains a known magnetite deposit, partly explored through diamond drilling by the U.S. Bureau of Mines. The Brandy Brook Northwest deposit is a body of low-grade to medium-grade ore, possibly of lathlike shape. The Silver Pond deposit has no commercial interest at the moment. One of more promising magnetic anomalies remain to be tested by drilling.

New York↗

USGS2009

Groundwater Conditions and Studies in the Albany Area of Dougherty County, Georgia, 2008

The U.S. Geological Survey has been working cooperatively with the Albany Water, Gas, and Light Commission to monitor groundwater quality and availability since 1977. This report presents an overview of groundwater conditions and studies in the Albany area of Dougherty County, Georgia, during 2008. Historical data also are presented for comparison with 2008 data. Ongoing monitoring activities include continuous water-level recording in 24 wells and periodic water-level measurements in 5 wells. During 2008, water levels in 10 of the continuous-recording wells were below normal, corresponding to lower than average rainfall. Groundwater samples collected from 25 wells in the Upper Floridan aquifer indicate that nitrate levels during 2008 were similar to values from 2007, with a maximum of 12.5 milligrams per liter at one well. Water samples collected from the Flint River and wells at the Albany well field were analyzed and plotted on a trilinear diagram to show the percent composition of selected major cations and anions. Groundwater constituents (major cations and anions) of the Upper Floridan aquifer at the Albany well field remain distinctly different from those in the water of the Flint River. To improve the understanding of the groundwater-flow system and nitrate movement in the Upper Floridan aquifer, the U.S. Geological Survey is developing a groundwater-flow model in the Albany area of southwestern Georgia. The model is being calibrated to simulate periods of dry (October 1999) hydrologic conditions. Preliminary results of particle tracking indicate that water flows to the well field from the northwest.

Georgia↗

USGS2004

Water quality and possible sources of nitrate in the Cimarron Terrace Aquifer, Oklahoma, 2003

Water from the Cimarron terrace aquifer in northwest Oklahoma commonly has nitrate concentrations that exceed the maximum contaminant level of 10 milligrams per liter of nitrite plus nitrate as nitrogen (referred to as nitrate) set by the U.S. Environmental Protection Agency for public drinking water supplies. Starting in July 2003, the U.S. Geological Survey, in cooperation with the Oklahoma Department of Environmental Quality, conducted a study in the Cimarron terrace aquifer to assess the water quality and possible sources of nitrate. A qualitative and quantitative approach based on multiple lines of evidence from chemical analysis of nitrate, nitrogen isotopes in nitrate, pesticides (indicative of cropland fertilizer application), and wastewater compounds (indicative of animal or human wastewater) were used to indicate possible sources of nitrate in the Cimarron terrace aquifer. Nitrate was detected in 44 of 45 ground-water samples and had the greatest median concentration (8.03 milligrams per liter) of any nutrient analyzed. Nitrate concentrations ranged from <0.06 to 31.8 milligrams per liter. Seventeen samples had nitrate concentrations exceeding the maximum contaminant level of 10 milligrams per liter. Nitrate concentrations in agricultural areas were significantly greater than nitrate concentrations in grassland areas. Pesticides were detected in 15 of 45 ground-water samples. Atrazine and deethylatrazine, a metabolite of atrazine, were detected most frequently. Deethylatrazine was detected in water samples from 9 wells and atrazine was detected in samples from 8 wells. Tebuthiuron was detected in water samples from 5 wells; metolachlor was detected in samples from 4 wells; prometon was detected in samples from 4 wells; and alachlor was detected in 1 well. None of the detected pesticide concentrations exceeded the maximum contaminant level or health advisory level set by the U.S. Environmental Protection Agency. Wastewater compounds were detected in 28 of 45 groundwater samples. Of the 20 wastewater compounds detected, 11 compounds were from household chemicals, 3 compounds were hydrocarbons, 2 compounds were industrial chemicals, 2 compounds were pesticides, 1 compound was of animal source, and 1 compound was a detergent compound. The most frequently detected wastewater compound was phenol, which was detected in 23 wells. N,N-diethyl-meta-toluamide (DEET) was detected in water samples from 5 wells. Benzophenone, ethanol- 2-butoxy-phosphate, and tributylphosphate were detected in water samples from 3 wells. Fertilizer was determined to be the possible source of nitrate in samples from 13 of 45 wells sampled, with a15N values ranging from 0.43 to 3.46 permil. The possible source of nitrate for samples from the greatest number of wells (22 wells) was from mixed sources of nitrate from fertilizer, septic or manure, or natural sources. Mixed nitrate sources had a 15N values ranging from 0.25 to 9.83 permil. Septic or manure was determined as the possible source of nitrate in samples from 2 wells. Natural sources were determined to be the possible source of nitrate in samples from 7 wells, with a 15N values ranging from 0.83 to 9.44 permil.

Scientific Investigations Report↗

USGS1975

Possible extension of mineral belts, northern part of Coeur d'Alene district, Idaho

The ore deposits in the northern part of the Coeur d'Alene district are located within rocks of the Belt Supergroup that have been intruded by Cretaceous quartz monzonites. Lead-zinc-silver replacement veins constitute most of the deposits. The geometry of the district has been modified by post-ore faulting along the Osburn, Dobson Pass, and other faults. The original position of the Gem stocks, before their separation from the Diego Peak stocks by the Dobson Pass fault, can be approximately reconstructed by moving the truncated stocks and associated geochemical dispersion patterns back into matching positions. The known mineral belts are defined by dispersion patterns of both lead and the Pb:Zn ratio. Similar dispersion patterns of lead and the Pb:Zn ration northwest of the original position of the Gem stocks suggest that the mineral belts extend into that area.

Idaho↗

USGS1975

Structure and Paleozoic stratigraphy of a complex of thrust plates in the Fish Creek Reservoir area, south-central Idaho

Permian, Pennsylvanian, Mississippian, Devonian, and Silurian marine rocks of diverse facies are brought together in a complex of six thrust sheets in the Fish Creek Reservoir area on the north edge of the Snake River Plain, Idaho. The lowest structural element, the parautochthon, is made of more than 450 m (1,500 ft) of folded and faulted Devonian miogeosynclinal carbonate rocks present in a 6.5-km 2 (2.5-mi 2 ) window. Along the east margin of the window, a sliver of continental margin transitional carbonate rocks of Early Devonian and Late Silurian age assigned to the Roberts Mountains Formation is thrust over the miogeosynclinal rocks. The window of middle Paleozoic rocks is overridden along the Fish Creek thrust fault by the flysch facies of the Copper Basin Formation, a turbidite-submarine-fan sequence more than 1,000 m (3,300 ft) thick, of Mississippian age. About 4.8 km (3 mi) southwest of the window, about 100 m (300 ft) of deepwater siliceous oceanic facies clastic rocks are exposed, which are assigned with question to the Milligen(?) Formation of Devonian age. These clastic rocks are interpreted to be thrust over the Copper Basin Formation. The highest structural elements are sequences more than 610 m (2,000 ft) thick of interbedded sandy and conglomeratic limestones, quartzites, and conglomerates and interbedded siltstones and argillites of the Wood River Formation of Middle Pennsylvanian to Early Permian age. The Wood River Formation is in thrust contact with the Milligen(?) Formation in the southwest part of the mapped area and with Copper Basin Formation along the west side of Fish Creek Reservoir. All the thrust sheets have moved eastward. The minimum distance moved is estimated from sedimentation models and facies reconstructions to range from perhaps several kilometres for the allochthon of the Roberts Mountains Formation to 48 km (30 mi) for the Milligen(?) Formation allochthon. The principal period of thrusting was post-Early Permian (post-Wood River Formation) and preEocene (pre-Challis Volcanics) and is of probable Sevier age. Middle Paleozoic rocks of the Milligen and Roberts Mountains Formations, however, also may have been involved in an earlier period of thrusting of latest Devonian to earliest Mississippian age related to the Antler orogeny. The thrust sheets were deformed into a northwest-trending dome in late Mesozoic time and were broken by basin-range faults during the Tertiary.

Idaho↗

USGS2015

Southern Salish Sea Habitat Map Series: Admiralty Inlet

In 2010 the Environmental Protection Agency, Region 10 initiated the Puget Sound Scientific Studies and Technical Investigations Assistance Program, designed to support research in support of implementing the Puget Sound Action Agenda. The Action Agenda was created in response to Puget Sound having been designated as one of 28 estuaries of national significance under section 320 of the U.S. Clean Water Act, and its overall goal is to restore the Puget Sound Estuary's environment by 2020. The Southern Salish Sea Mapping Project was funded by the Assistance Program request for proposals process, which also supports a large number of coastal-zone- and ocean-management issues. The issues include the recommendations of the Marine Protected Areas Work Group to the Washington State Legislature (Van Cleve and others, 2009), which endorses a Puget Sound and coast-wide marine conservation needs assessment, gap analysis of existing Marine Protected Areas (MPA) and recommendations for action. This publication is the first of four U.S. Geological Survey Scientific Investigation Maps that make up the Southern Salish Sea Mapping Project. The remaining three map blocks to be published in the future, located south of Admiralty Inlet, are shown in figure 1. Puget Sound is a deep, fjord-type estuary covering an area of 2,330 km 2 in the Pacific Northwest region of the United States (fig. 1). It is connected to the ocean by the Strait of Juan de Fuca, a turbulent passage approximately 160 km in length and 22 km wide at its west end, expanding to over 40 km wide at its east end (Thomson, 1994). During the Pleistocene, the area was occupied several times by lobes of continental ice, resulting in a complex basin-fill of glacial and interglacial deposits that are locally as thick as 1100 m (Johnson and others, 2001). The last glaciation, called the Fraser glaciation, began after 28,800±740 14 C yr B.P. when ice started a slow expansion (Clague, 1981). At peak advance the westward Juan de Fuca lobe reached the edge of the continental shelf through the Juan de Fuca Strait shortly before 14,460±200 14 C yr B.P. (Herzer and Bornhold, 1982). The southward Puget lobe advanced to its terminal position in Puget Sound by around 14,150 14 C yr B.P. (Porter and Swanson, 1998). Ice retreated from its maximum to northern Whidbey Island by 13,650±350 14 C yr B.P. (Dethier and others, 1995). Retreating glaciers resulted in a thick sequence of ice-contact, glacial-marine sediment, and early post-glacial sediments (Linden and Schurrer, 1988). These deposits have experienced the effects of a marine transgression followed by regression, resulting in a sea-level several tens of meters lower than the present day (Linden and Schurrer, 1988). A second transgression brought sea level to about the present level by around 5,470±120 14 C yr B.P. (Clague and others, 1982) establishing the present oceanographic and geologic environment Puget Sound is separated into four interconnected basins; Whidbey, Central (Main), Hood Canal, and South (Thomson, 1994). The Whidbey, Central, and Hood Canal basins are the three main branches of the Puget Sound estuary and are separated from the Strait of Juan de Fuca by a double sill at Admiralty Inlet. The Admiralty Inlet map area includes the Inlet and a portion of the Whidbey Basin (fig. 1). The shallower South Basin is separated by a sill at Tacoma Narrows and is highly branched with numerous finger inlets. Flow within Puget Sound is dominated by tidal currents of as much as 1 m/s at Admiralty Inlet, reducing to approximately 0.5 m/s in the Central Basin (Lavelle and others, 1988). The lack of silt and clay-sized sediments in the Admiralty Inlet map area is likely a result of the strong currents (see Ground-Truth Studies for the Admiralty Inlet Map Area, sheet 3). The subtidal component of flow reaches approximately 0.1 m/s and is driven by density gradients arising from the contrast in salty ocean water at the entrance and freshwater inputs from stream flow (Lavelle and others, 1988). The total freshwater input to Puget Sound is approximately 3.4 x 10 6 m 3 /day, primarily from the Skagit River (Cannon, 1983). The subtidal circulation mostly consists of a two-layered flow in the basins with fresher water exiting at the surface and saltier water entering at depth (Ebbesmeyer and Cannon, 2001). In general, surface waters flow north and deeper waters flow south; variations arise from wind effects that can drive a surface current in the same direction as the wind, and a baroclinic response in the lower layer to about 100-m depth (Matsuura and Cannon, 1997). Oceanographic properties are influenced by temporal forcing parameters such as reduced stream flow during the 2000-01 drought that increased surface salinity and decreased differences between surface and bottom waters (Newton and others, 2003). On offshore seismic-reflection profiles, Pleistocene strata (excluding latest Pleistocene glacial and post-glacial deposits) form a distinct seismic unit, bounded below by pre-Tertiary or Tertiary basement and above by typically flat-lying latest Pleistocene to Holocene deposits that fill in erosional or depositional relief (Johnson and others, 2001). Cores from central Puget Sound have accumulation rates that range from 85 to 1200 mg/cm 2 /yr, or 0.12 to 2.4 cm/yr; the highest accumulation rates are near the southern end of central Puget Sound (Carpenter and others, 1985). Carpenter and others (1985) un-weighted arithmetic mean of accumulation rates for central Puget Sound deeper stations is 480±340 (± one standard deviation) mg/cm 2 /yr. Lavelle and others (1985) also found rates as high as 1200 mg/cm 2 /yr over the past approximately 70 years in cores in the Central Basin off of and north and south of Elliott Bay. Puget Sound basin rates are comparable to rates in midshelf silt deposits on the Washington coast north of the Columbia River (Nittrouer and others, 1979). The deep subtidal (in other words, below SCUBA depths) habitats of Puget Sound are relatively poorly known. A few subtidal surveys exist for several habitat types from the 1960s and 1970s (reviewed in Dethier, 1990), using grab and box core data. The Dethier (1990) review divides habitat up into Coast and Marine Ecological Classification Standard (CMECS) substrate, water column energy, and depth zones but does not attempt to map these habitats, rather it is an inventory of habitats found in the area and the flora and fauna associated with each habitat. The approach of the Southern Salish Sea Mapping project is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data (the undersea equivalent of satellite remote-sensing data in terrestrial mapping), acoustic backscatter, seafloor video, seafloor photography, and bottom-sediment sampling data. This approach is based in part on methods presented and data collection and product needs identified at the Washington State Seafloor Mapping Workshop (Washington State Seafloor Mapping Workshop Steering Committee, 2008), attended by coastal and marine managers and scientists. The map products display seafloor geomorphology and substrate, and identify potential marine benthic habitats. It is emphasized that the more interpretive habitat and geology maps rely on the integration of multiple, new high-resolution datasets and that mapping at small scales would not be possible without such data. Oceanographic current and wave data is not included in this analysis, however, the accompanying geographic information system (GIS) data set is designed and intended to be combined with oceanographic and biologic data sets assembled by others in the future and some of the GIS data has already been incorporated in the unpublished Nature Conservancy Benthic Habitats of Puget Sound database. This publication includes four map sheets, explanatory text, and a descriptive pamphlet. Each map sheet is published as a portable document format (PDF) file. ESRI ArcGIS compatible geotiffs (for example, bathymetry) and shapefiles (for example video observation points) will be available for download in the data catalog associated with this publication (Cochrane, 2015). An ArcGIS Project File with the symbology used to generate the map sheets is also provided. For those who do not own the full suite of ESRI GIS and mapping software, the data can be read using ESRI ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html .

Washington↗

USGS1947

Cobalt-copper deposits of the Blackbird district, Lemhi County, Idaho

The Blackbird district is in east-central Idaho, about 20 miles west-southwest of Salmon. The area is one of deeply weathered, flat-topped upland surfaces cut by several steep-walled valleys, which are tributary to the canyon of Panther Creek. Most of the area has a heavy vegetative cover and outcrops are relatively scarce except in the walls of the steeper valleys. The rocks of the district consist mostly of metamorphosed sedimentary rocks of the pre-Cambrian Yellowjacket formation (Belt series); a part of the Cretaceous Idaho batholith cuts across the northern part of the district, and acid porphyry dikes and metamorphosed basic rocks cut the Yellowjacket rocks. Structurally, the sedimentary rocks are divided by faults into three, roughly north-south blocks. The center one (Blackbird structural block) appears to have been more tightly squeezed than the others into relatively tight folds, with the development of widespread schistosity (flow cleavage). The rocks of the two outside blocks are in more open folds. In general they are nonschistose, except for the north end of the western block, where there are schistose rocks cut by several north-dipping thrust faults. The northern parts of the central and western blocks contain considerable garnet, chloritoid, and cordierite. The Blackbird structural block is cut by a number of mineralized shear zones. Those dipping moderately northeast and striking northwest, and those dipping steeply and striking north and northeast; appear to be most important. The mineralized rock contains chalcopyrite, cobaltite, pyrite, and pyrrhotite into a gangue of quartz, biotite, tourmaline, ankerite, and muscovite; the deposits were formed mostly by replacement of the shear zones. In addition, the block is cut by north-dipping thrust faults of west to northwest strike, and a number of high-angle faults. The district was first prospected about 1893; considerable developmont was done at the Brown Bear mine in 1899-1902, at the Haynes-Stellite in l917-1920, and at the Uncle Sam mine in 1938-1941, During World War II, the U.S. Bureau of Mines explored in the district with bulldozer and diamond drill., and the U.S. Geological Survey mapped the district and logged the drill cores. The Howe Sound Co. also did some diamond drilling in the district, and in 1945 the Calera Mining Co., Blackbird Division (subsidiary of Howe Sound Co.), started underground development at the Calera adit. Although the district has had very little production to the present, it is believed that a large tonnage of copper-cobalt ore exists in the district which should permit mining to be continued over a long period. The report contains brief descriptions of all the accessible workings in the district, of which the most important are Calera, Brown Bear, Uncle Sam, and Hawkeye mines. In the Calera adit, about 1,700 feet of the mineralized zone, ranging in width from 3 feet to 40 feet and averaging about 15 feet; have been explored (August 1946); the zone lies on a wide northwest-striking shear zone dipping moderately ( 60° ±) northeast. The Brown Bear adit is in a wide, mineralized, north-south shear zone in which are higher-grade pods plunging 25° to 35° north. The Uncle Sam mine explores a relatively narrow north-south shear zone in which are two or three north-plunging ore shoots. The Hawkeye mine is in a broad zone of mineralized schist in which are several north-plunging lenses of ore.

Idaho↗

USGS2021

Detailed traveltime tomography and seismic catalog around the 2019 Mw7.1 Ridgecrest, California, earthquake using dense rapid-response seismic data

We derive a detailed earthquake catalogue and V p , V s and V p / V s models for the region around the 2019 M w 6.4 and M w 7.1 Ridgecrest, California, earthquake sequence using data recorded by rapid-response, densely deployed sensors following the Ridgecrest main shock and the regional network. The new catalogue spans a 4-month period, starting on 1 June 2019, and it includes nearly 95 000 events detected and located with iterative updates to our velocity models. The final V p and V s models correlate well with surface geology in the top 4 km of the crust and spatial seismicity patterns at depth. Joint interpretation of the derived catalogue, velocity models, and surface geology suggests that (i) a compliant low-velocity zone near the Garlock Fault arrested the M w 7.1 rupture at the southeast end; (ii) a stiff high-velocity zone beneath the Coso Mountains acted as a strong barrier that arrested the rupture at the northwest end and (iii) isolated seismicity on the Garlock Fault accommodated transtensional-stepover strain triggered by the main events. The derived catalogue and velocity models can be useful for multiple future studies, including further analysis of seismicity patterns, derivations of accurate source properties (e.g. focal mechanisms) and simulations of earthquake processes and radiated seismic wavefields.

California↗

USGS2022

Revisiting the 1899 earthquake series using integrative geophysical analysis in Yakutat Bay, Alaska

A series of large earthquakes in 1899 affected southeastern Alaska near Yakutat and Disenchantment Bays. The largest of the series, a M W 8.2 event on 10 September 1899, generated an ~12-m-high tsunami and as much as 14.4 m of coseismic uplift in Yakutat Bay, the largest coseismic uplift ever measured. Several complex fault systems in the area are associated with the Yakutat terrane collision with North America and the termination of the Fairweather strike-slip system, but because faults local to Yakutat Bay have been incompletely or poorly mapped, it is unclear which fault system(s) ruptured during the 10 September 1899 event. Using marine geophysical data collected in August 2012, we provide an improved tectonic framework for the Yakutat area, which advances our understanding of earthquake hazards. We combined 153 line km of 2012 high-resolution multichannel seismic (MCS) reflection data with compressed high-intensity radar pulse (Chirp) profiles, basin-scale MCS data, 2018 seafloor bathymetry, published geodetic models and thermochronology data, and previous measurements of coseismic uplift to better constrain fault geometry and subsurface structure in the Yakutat Bay area. We did not observe any active or concealed faults crossing Yakutat Bay in our high-resolution data, requiring faults to be located entirely onshore or nearshore. We interpreted onshore faults east of Yakutat Bay to be associated with the transpressional termination of the Fairweather fault system, forming a series of splay faults that exhibit a horsetail geometry. Thrust and reverse faults on the west side of the bay are related to Yakutat terrane underthrusting and collision with North America. Our results include an updated fault map, structural model of Yakutat Bay, and quantitative assessment of uncertainties for legacy geologic coseismic uplift measurements. Additionally, our results indicate the 10 September 1899 rupture was possibly related to stress loading from the earlier Yakutat terrane underthrusting event of 4 September 1899, with the majority of 10 September coseismic slip occurring on the Esker Creek system on the northwest side of Yakutat Bay. Limited (~2 m) coseismic or postseismic slip associated with the 1899 events occurred on faults located east of Yakutat Bay.

Alaska↗

USGS2014

Digital topographic data based on lidar survey of Mount Shasta Volcano, California, July-September 2010

The most voluminous of the Cascade volcanoes, northern California’s Mount Shasta, is a massive compound stratovolcano composed of at least four main edifices constructed over a period of at least 590,000 years. An ancestral Shasta volcano was destroyed by Earth’s largest known Quaternary subaerial debris avalanche, which filled Shasta Valley, northwest of the volcano. The Hotlum cone, forming the present summit, the Shastina lava dome complex, and the Black Butte lava dome on the southwest flank, were constructed during the early Holocene. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne lidar (light detection and ranging) data collection at several volcanoes in the Cascade Range. Data collection was arranged by the Oregon Lidar Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon Lidar Consortium contracted with Watershed Sciences, Inc., to collect 1,220 square km of high-precision airborne lidar data. These data provide a digital map of the ground surface beneath forest cover with horizontal resolution of 1 m (average of 1.82 ground laser returns per square meter) and estimated vertical accuracy of ±4 centimeters (1 sigma), and horizontal accuracies of ±1.5 centimeters. These data will contribute to monitoring and description of natural hazards, the study of regional geology and volcanic landforms, and analysis of landscape modification during and after the next volcanic eruption at Mount Shasta. Survey Bounding Coordinates: West Bounding Coordinate: −122.438774 East Bounding Coordinate: −121.888382 North Bounding Coordinate: 41.564495 South Bounding Coordinate: 41.126339

California↗

USGS2024

Characterization of the structural–stratigraphic and reservoir controls on the occurrence of gas hydrates in the Eileen Gas Hydrate Trend, Alaska North Slope

One of the most studied permafrost-associated gas hydrate accumulations in Arctic Alaska is the Eileen Gas Hydrate Trend. This study provides a detailed re-examination of the Eileen Gas Hydrate Trend with a focus on the gas hydrate accumulation in the western part of the Prudhoe Bay Unit. This integrated analysis of downhole well log data and published geophysical data has provided new insight on structural, stratigraphic, and reservoir controls on the occurrence of gas hydrates in the Eileen Gas Hydrate Trend. This study revealed the relatively complex nature of the gas hydrate occurrences in the Eileen Gas Hydrate Trend, with gas hydrates present in a series of coarsening upward, laterally pervasive, mostly fine-grained sand beds exhibiting high gas hydrate saturations. Most of the gas hydrate-bearing reservoirs in the Eileen Gas Hydrate Trend are laterally segmented into distinct northwest- to southeast-trending fault blocks, occur in a combination of structural–stratigraphic traps, and are only partially hydrate filled with distinct down-dip water contacts. These findings suggest that the traditional parts of a petroleum system (i.e., reservoir, gas source, gas migration, and geologic timing of the system formation) also control the occurrence of gas hydrates in the Eileen Gas Hydrate Trend.

Alaska↗

USGS2009

Discussion on remote sensing for aquatic monitoring

The special session on Remote Sensing for Aquatic Resource Monitoring concluded with an expert panel discussion. Panel members were Jennifer Bountry (hydraulic engineer, Bureau of Reclamation), Mimi D’Iorio (GIS analyst and database manager, National Oceanic and Atmospheric Administration), Russ Faux (president, Watershed Sciences, Inc.), Steve Lanigan (team leader, Aquatic and Riparian Effectiveness Monitoring Program, U.S. Forest Service), and Amar Nayegandhi (computer scientist, Jacobs Technology, contracted to U.S. Geological Survey). The panel was moderated by Ralph Haugerud (geologist, U.S. Geological Survey) and there were significant contributions from the audience. The dialogue is summarized below in question and answer format. This summary is followed by discussion of what we learned in the course of the special session and identification of some next steps for the Pacific Northwest aquatic monitoring community.

PNAMP Special Publication↗

USGS2008

Geologic map of the Hidden Hills Ranch Quadrangle, Clark County, Nevada

The prominent structural feature in the Pahrump Valley is the right-lateral Pahrump-Stewart Valley fault system (PSV) (Anderson and others, 1995b), which is the central segment of the State Line fault system as defined by Blakely and others (1998). The main trace of this fault system, as shown in figure 1A, strikes northwest along the California-Nevada state line through Pahrump and Stewart Valleys (Anderson and others, 1995b). Hoffard (1991) describes three separate segments of the PSV within the Pahrump Valley (fig. 1B). The East Nopah fault zone (ENFZ) is a narrow band of right lateral, strike-slip faults along the eastern front of the Nopah Range. The Pahrump Valley fault zone (PVFZ) is a wider band of right-oblique-slip faults through the center of the Pahrump Valley and extending northwest into the Stewart Valley fault zone (SVFZ). The West Spring Mountains fault zone (WSMFZ) is a band of high-angle normal faults that strike north along the western front of the Spring Mountains and may represent a splay of the PVFZ.

Nevada↗

USGS2003

Geologic map of the Buckeystown quadrangle, Frederick and Montgomery Counties, Maryland, and Loudoun County, Virginia

The Buckeystown quadrangle is underlain mostly by rocks of the western Piedmont province and a portion of the eastern Blue Ridge province. The western Piedmont province is underlain by Late Proterozoic(?) and Lower Cambrian(?) metasedimentary rocks of the Westminster terrane, Lower and Middle Cambrian metasedimentary rocks and Upper Cambrian to Lower Ordovician carbonate rocks of the Frederick Valley synclinorium, Upper Triassic sedimentary rocks of the Mesozoic Culpeper basin, and Early Jurassic dikes; Lower Cambrian metasedimentary rocks underlie the Blue Ridge province. Within the western Piedmont, Lower Cambrian(?) metasedimentary rocks of the Sugarloaf Mountain anticlinorium are interpreted to be exposed in a tectonic window (A.A. Drake, Jr., U.S. Geological Survey, oral commun., 1989; Horton and others, 1989; Rankin and others, 1989) through the complexly deformed allochthonous rocks of the Westminster terrane (Muller and others, 1989). The undated rocks of the Westminster terrane are interpreted to be rise-slope deep-water deposits of the Iapetus Ocean that were transported westward onto the Laurentian margin (ancestral North America) along the Martic thrust fault during the Ordovician Taconic orogeny (Horton and others, 1989). Continental margin strata, which underlie the Sugarloaf Mountain anticlinorium and continental margin-slope strata which underlie the Frederick Valley synclinorium, are here correlated with the Lower Cambrian Chilhowee Group and overlying carbonate rocks on the limbs of the Blue Ridge-South Mountain anticlinorium to the west. The relation of the Sugarloaf Mountain Quartzite (Jonas and Stose, 1938b) to surrounding rocks is controversial (Scotford, 1951; Stose and Stose, 1951; Thomas, 1952). The Martic thrust fault (Jonas, 1924, 1927; Knopf and Jonas, 1929) and the interpretation that the Sugarloaf Mountain anticlinorium (Scotford, 1951; Thomas, 1952) is a tectonic window through the Martic thrust sheet (A.A. Drake, Jr., U.S. Geological Survey, oral commun., 1989) further complicate the stratigraphic correlation of these rocks. Upper Triassic sedimentary rocks of the Culpeper basin consist of westward-dipping conglomerate, sandstone, and siltstone. These rocks, as well as intrusive Early Jurassic diabase dikes, accumulated during an early Mesozoic rifting event that resulted in the opening of the Atlantic Ocean. Contractional faults of Paleozoic orogenesis and extensional faults related to Mesozoic rifting indicate a complex tectonic history for this region. Cenozoic deposits, which overlie the bedrock, include high- and low-level alluvial terraces, residual gravel, colluvium, and alluvium. Terrace deposits of the ancestral Potomac River and the Monocacy River are as much as 183 ft and 140 ft, respectively, above the present river levels. Isolated residual gravel deposits that form in place from the weathering of the Upper Cambrian Frederick Formation superficially resemble terrace deposits. Colluvium of quartzite boulders is concentrated in hillslope depressions on Sugarloaf Mountain, and fanlike aprons of colluvial quartz pebbles cover the Triassic rocks on the west side of the Culpeper basin. Alluvium was mapped along the Potomac and Monocacy Rivers and all their tributaries. Altitude ranges from 200 ft along the Potomac River to 1,282 ft on the crest of Sugarloaf Mountain. The map area includes the Chesapeake and Ohio Canal National Historical Park, and the Monocacy Natural Resources Area. Sugarloaf Mountain is a registered natural landmark. Parts of the Buckeystown quadrangle were mapped by Jonas and Stose (1938a, scale 1:62,500), Scotford (1951, scale 1:12,500), Thomas (1952, scale 1:25,000), Cloos and Cook (1953, 1:62,500), Reinhardt (1974, scale 1:62,500), Froelich 1975, scale 1:62,500), and Lee (1979, scale 1:24,000). The map area is subdivided into five domains. Allochthonous rocks of the Westminster terrane are thrust onto rocks of the Frederick Valley synclinorium. Within the Westminster terrane of Muller and others (1989), the Sugarloaf Mountain Quartzite and Urbana Formation underlie the parautochthonous Sugarloaf Mountain anticlinorium. The Lower and Middle Cambrian Araby Formation and Upper Cambrian Frederick Formation crop out on the east limb of the Frederick Valley synclinorium. The Frederick Formation and Upper Cambrian and Lower Ordovician Grove Formation lie in the trough of the Frederick Valley synclinorium. Lower Cambrian Harpers, Antietam, and Tomstown Formations crop out on the east limb of the Blue Ridge-South Mountain anticlinorium in the extreme northwest corner of the map. The Blue Ridge-South Mountain anticlinorium is separated from the Frederick Valley synclinorium by Upper Triassic sedimentary rocks in the Culpeper basin half graben.

Maryland, Virginia↗