Geology ReportsSearch

SEARCH · Geology Reports

Results for “General Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

Estimation of the effects of land use and groundwater withdrawals on streamflow for the Pomperaug River, Connecticut

A precipitation runoff model for the Pomperaug River watershed, Connecticut was developed to address issues of concern including the effect of development on streamflow and groundwater recharge, and the implications of water withdrawals on streamflow. The model was parameterized using a strategy that requires a minimum of calibration and optimization by establishing basic relations between the parameter value and physical characteristics of individual hydrologic response units (HRUs) that comprise the model. The strategy was devised so that the information needed can be obtained from Geographic Information System and other general databases for Connecticut. Simulation of groundwater recharge enabled evaluation of the temporal and spatial mapping of recharge variation across the watershed and the spatial effects of changes in land cover on base flow and surface runoff. The modeling indicated that over the course of a year, groundwater provides between 60 and 70 percent of flow in the Pomperaug River; the remainder is generated by more rapid flow through the shallow subsurface and runoff from impermeable surfaces and saturated ground. Groundwater is recharged primarily during periods of low evapotranspiration in the winter, spring, and fall. The largest amount of recharge occurs in the spring in response to snowmelt. During floods, the Weekeepeemee and Nonnewaug Rivers (tributaries that form the Pomperaug River) respond rapidly with little flood peak attenuation due to flood-plain storage. In the Pomperaug River, flood-plain storage is more important in attenuating floods; abandoned quarry ponds (O&G ponds) adjacent to the river provide substantial flood storage above specific river stages when flow from the river spills over the banks and fills the ponds. Discharge from the ponds also helps to sustain low flows in the Pomperaug River. Similarly, releases from the Bronson-Lockwood reservoir sustain flow in the Nonnewaug River and tend to offset the effect of groundwater withdrawals from a well field adjacent to the river during periods of natural low flow. The model indicated that under the current zoning, future development could reduce low flows by as much as 10 percent at the 99 percent exceedance level (99 percent of flows are greater than or equal to this flow), but would not substantially increase the highest flows. Simulation of projected and hypothetical development in the watershed shows, depending on how stormwater is managed, that between 10 and 20 percent effective impervious area in an HRU results in streamflow becoming dominated by the surface-runoff component. This shift from a groundwater-dominated system would likely result in substantial changes in water quality and instream habitat characteristics of the river. Base flow to streams in the Pomperaug River watershed is reduced by both increased impervious surface and increased groundwater withdrawals. For the watershed as a whole, increasing groundwater withdrawals have the potential for causing greater overall reductions in flow compared to increased development and impervious surfaces. Additionally, on the basis of groundwater-modeling simulations, the projected increase in development across the watershed and, to a lesser extent the increase in groundwater withdrawals, will increase the number of local losing reaches experiencing dry conditions and the duration of these dry periods. The location of the losing reaches tends to be in areas near the transition from the uplands to the valley bottoms that are filled with coarse glacial stratified deposits. The simulated increase in the duration and extent of localized dry stream reaches is most sensitive to local increase in impervious surface. Conversion of land from forest or developed land cover to pasture or agricultural land increases groundwater recharge and discharge to streams, while at the same time increasing overall streamflow (the opposite effect as increased impervious surface). These resu

Scientific Investigations Report

Effects of noise from oil and gas development on ungulates and small mammals—A science synthesis to inform National Environmental Policy Act analyses

The U.S. Geological Survey is working with Federal land management agencies to develop a series of science syntheses to support environmental effects analyses that agencies conduct to comply with the National Environmental Policy Act (NEPA). This report synthesizes science information about the potential effects of noise from oil and gas development on North American ungulates and small mammals, including rodents and leporids. We conducted a structured search of published scientific literature to find information about noise levels produced during oil and gas development, methods for analyzing sound propagation, the effects of noise on ungulates and small mammals, and measures to reduce noise emissions. We organized the sections of this synthesis to align with standard elements of NEPA analyses. We found that oil and gas development is a common source of human-caused noise on public lands and includes noise sources such as heavy construction and drilling machinery, long-term production machinery, truck traffic, and aircraft. Common techniques for predicting potential noise include field data collection using a sound level meter, inference from previously published data, and sound propagation modeling. A substantial body of research shows that human-caused noise can affect wildlife health and behavior, with variation in sensitivity to noise among species. Studies have shown consistent, detectable effects of noise on ungulates, but the amount of literature on ungulates is very small, and additional research could improve our understanding of differences in effects among species, seasons, and individual indicators of fitness. Several species of small mammals are dependent on audible signals for predator detection and communication, and noise has been shown to affect their vigilance and foraging behavior. However, other studies have documented no effects to rodents in noisy areas, and the effects of noise on small mammals may differ by species and study system. Techniques suggested in the literature for reducing noise emissions include sound barriers, seasonal and daily timing restrictions, traffic control measures, and siting infrastructure to take advantage of natural sound barriers. Public land managers can use this report by incorporating it by reference in NEPA documentation, as supplemental information, or as a general reference for literature about the effects of noise from oil and gas development on ungulates and small mammals.

Scientific Investigations Report

Effects of culverts on habitat connectivity in streams—A science synthesis to inform National Environmental Policy Act analyses

The U.S. Geological Survey is working with Federal land management agencies to develop a series of science syntheses to support environmental effects analyses that agencies conduct to comply with the National Environmental Policy Act (NEPA). This report synthesizes science information about the potential effects of culverts on stream connectivity and subsequent effects on fish. We conducted a structured search of published scientific literature to find information about (1) culvert design, installation, and degradation; (2) methods for analyzing culvert condition and quantifying stream connectivity; and (3) the effects of changes to stream connectivity on freshwater fish. We follow the organization first established in U.S. Geological Survey Scientific Investigations Report 2023-5114, in which the report sections align with standard elements of NEPA analyses. We found that, while the effects of dams on stream biota are well documented, smaller barriers at road crossings, like culverts, are prevalent and collectively have a substantial effect on habitat connectivity. Individual culverts differ in the degree to which they impede the movement of aquatic organisms, and we documented methods to assess and estimate the permeability of a culvert, or the ability of aquatic organisms to pass through it. Finally, we outlined methods for using culvert location and permeability information to quantify connectivity in a watershed based on the Dendritic Connectivity Index. Studies have shown that channel constriction, perched outlets, and extreme flow velocities are some of the characteristics of culverts that may hinder aquatic organism passage. Culverts can serve as daily and seasonal barriers to fish, disrupting access to habitat and essential resources like cold water or overwintering refuges. Reduced connectivity can have population-level effects, leading to lower fish species richness and abundance in affected watersheds. Public land managers can use this report by incorporating it by reference in NEPA documentation, as supplemental information, or as a general reference for literature about the effects of culverts on stream connectivity and freshwater fish.

Scientific Investigations Report

Effects of noise from oil and gas development on raptors and songbirds—A science synthesis to inform National Environmental Policy Act analyses

The U.S. Geological Survey is working with Federal land management agencies to develop a series of science syntheses to support environmental effects analyses that agencies conduct to comply with the National Environmental Policy Act (NEPA). This report synthesizes science information about the potential effects of noise from oil and gas development on North American raptors, songbirds, and other small avian species. We conducted a structured search of published scientific literature to find information about noise levels produced during oil and gas development, methods for analyzing sound propagation, the effects of noise on avian species, and measures to reduce noise emissions. We follow the organization first established in U.S. Geological Survey Scientific Investigations Report 2023-5114, in which the report sections align with standard elements of NEPA analyses. We found that oil and gas development is a common source of human-caused noise on public lands and includes noise sources such as heavy construction and drilling machinery, long-term production machinery, truck traffic, and aircraft. Common techniques for predicting potential noise include field data collection using a sound level meter, inference from previously published data, and sound propagation modeling. The effects of human-caused noise on songbirds are well researched, whereas, among raptors, only owl species have been well-studied in relation to noise. Several studies have established that noise can reduce owl hunting success because many owl species are heavily reliant on hearing prey when hunting. The effects of noise on songbirds depend on several factors. Typically, birds that rely on vocal communication for mating, predator detection, and spatial orientation, and that are less able to adjust the frequencies of their vocalizations, are more vulnerable to behavioral changes and decreased fitness in noisy areas. Techniques suggested in the literature for reducing noise emissions include artificial sound barriers, seasonal and daily timing restrictions, traffic control measures, and siting infrastructure to take advantage of natural sound barriers. Public land managers can use this report by incorporating it by reference in NEPA documentation, as supplemental information, or as a general reference to find literature or identify gaps in the literature about the effects of noise from oil and gas development on raptors and songbirds.

Scientific Investigations Report

Preparations for water sampling

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A1, provides an overview of preparations for water sampling, which includes site reconnaissance, project work plans, quality-assurance plans, basic equipment and supplies needed for fieldwork, safety precautions, and planning for data management. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A1, version 2.0, by F.D. Wilde. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm-owq@usgs.gov .

Techniques and Methods

Lakes and reservoirs—Guidelines for study design and sampling

The “National Field Manual for the Collection of Water-Quality Data” (NFM) is an online report with separately published chapters that provides the protocols and guidelines by which U.S. Geological Survey personnel obtain the data used to assess the quality of the Nation’s surface-water and groundwater resources. Chapter A10 reviews limnological principles, describes the characteristics that distinguish lakes from reservoirs, and provides guidance for developing temporal and spatial sampling strategies and data-collection approaches to be used in lake and reservoir environmental investigations. Within this chapter are references to other chapters of the NFM that provide more detailed guidelines related to specific topics and more detailed protocols for the quality assurance and assessment of the lake and reservoir data. Protocols and procedures to address and document the quality of lake and reservoir investigations are adapted from, or referenced to, the protocols and standard operating procedures contained in related chapters of this NFM. Before 2017, the U.S. Geological Survey (USGS) “National Field Manual for the Collection of Water-Quality Data” (NFM) chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0, 2018) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov . Comments, questions, and suggestions related to the NFM can be addressed to nfm-owq@usgs.gov .

Techniques and Methods

Guidelines for field-measured water-quality properties

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.0, provides guidance and protocols for the measurement of field parameters on site, which include the selection of sites and methods for measurement in groundwater and surface water and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.0, version 2.0, by Franceska D. Wilde. Field parameters are routinely measured when water samples are collected, are often measured continually at USGS streamgages, and are regularly measured during laboratory and field experiments. The field methods for measuring field parameters described in this chapter are applicable to most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Temperature

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.1, provides guidance and protocols for the measurement of temperature of air, of a surface-water body or in groundwater, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration verification, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.1, version 2.0, by Franceska D. Wilde. Temperature of air and water is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring temperature described in this chapter is applicable to air and most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Chapter A6.2. Dissolved oxygen

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface water and groundwater resources. This chapter, NFM A6.2, provides guidance and protocols for the measurement of dissolved oxygen, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.2, version 3.0, by Stewart A, Rounds, Franceska D. Wilde, and George F. Ritz. Dissolved oxygen is routinely measured when water samples are collected, is often continually measured at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring dissolved oxygen described in this chapter is applicable to most natural waters. Before 2017, the USGS NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0—U.S. Geological Survey, 2018) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Chapter A6.3. Specific Conductance

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.3, provides guidance and protocols for the measurement of specific conductance of a water sample, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.3, version 1.2, by D.B. Radtke, J.V. Davis, and F.D. Wilde. Specific conductance is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring specific conductance described in this chapter is applicable to most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov. Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Chapter A6.4. Measurement of pH

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.4, provides guidance and protocols for the measurement of pH of a water sample, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration, procedures for measurement and reporting, and troubleshooting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.4, version 2.0, by G.F. Ritz and J.A. Collins. The pH of natural waters is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field methods for measuring pH described in this chapter are applicable to most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Use of multiparameter instruments for routine field measurements

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.8, provides guidance and protocols for the use of multiparameter instruments for routine field measurements, which includes storage and maintenance of equipment, calibration, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.8, version 1.1, by Jacob Gibs, Franceska D. Wilde, and Heather A. Heckathorn. The use of multiparameter instruments for conducting field measurements has become routine. The methods described here are specific to the use of multiparameter instruments. The field methods described in this chapter are applicable to most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Hydrography of the Susquehanna River drainage basin

A detailed study of the hydrographic features of the Susquehanna River drainage basin has revealed the existence of a large amount of interesting data. These, however, are widely distributed in various publications and manuscripts which are in most cases inaccessible. This paper has been prepared to meet the constant demand for this information from both the general and the engineering public. The general deductions are intended to give the general reader a comprehensive review of the principal conditions which exist in this area, while the base data have been given for the use of the engineer, so that he may make his own deductions and have sufficient data for estimates in hydraulic investigations.

Water Supply Paper

Underground waters of eastern United States

The present paper is a brief summary of the underground water conditions in eastern United States, prepared to meet the demands of drillers and others for information relating to the general water resources of the various States or of specified regions. The detail with which the several regions or subjects are discussed depends mainly on their relative importance, although because of the greater amount of work done in certain localities, or on certain problems, it is possible to make more complete and definite statements in regard to the underground water supplies in some regions than in others. The included reports have been prepared by a number of geologists, each, in general, having charge of the investigations in a particular State or group of States. Because of the number of contributors there is necessarily considerable variation in the manner of treatment of the subject, but in most cases the same general plan has been followed. In preparing the paper simplicity of treatment has been kept in mind, and elaborate geologic discussions have been omitted. Wherever possible maps have been given in preference to long and possibly obscure discussions. In some instances, however, it has been necessary to describe the various water-bearing formations under their geologic names. Where this has been necessary the aim has been to employ those terms which are oldest and best known to the people of the States to which the discussion relates. For the purpose of presenting in a simple manner a few of the more important features relating to the nature and occurrence of subterranean waters and of making more intelligible the descriptions of the conditions in the various States, there is given a short paper on the general occurrence of underground waters.

eastern United States

Extension of EMA to address regional skew and low outliers

The recently developed expected moments algorithm [EMA] (Cohn et al. 1997) does as well as MLEs at estimating LP3 flood quantiles using systematic and historical information. Needed extensions include use of a regional skewness estimator and its precision to be consistent with Bulletin 17B and to make use of such hydrologic information. Another issue addressed by Bulletin 17B is the treatment of low outliers. A Monte Carlo study illustrates the performance of an extended EMA estimator compared to estimators that employ the complete data set with and without use of regional skew, conditional probability adjustment from Bulletin 17B, and an estimator that uses probability plot regression to compute substitute values for low outliers. Estimators that use a regional skew all do better than estimators that fail to use an informative regional skewness estimator. For LP3 data, the low outlier rejection procedure results in no loss of overall accuracy, and the differences between the MSEs of the estimators that used an informative regional skew were generally negligible in the skew range of real interest.

Conference Paper

Reconnaissance of chemical quality of surface water and fluvial sediment in the Price River Basin, Utah

This report on the quality of surface water in the Price River basin was prepared by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights. The primary purpose of the reconnaissance on which this report is based was to obtain information about (1) the general chemical characteristics of surface water throughout the basin, (2) the effect of the natural environment and of present water use on these chemical characteristics, and (3) general characteristics of the sediment discharge of selected streams in the basin. A secondary objective was the definition of specific problem areas or reaches in which marked deterioration in water quality was evident.

Utah

Trait-based approaches in the analysis of stream fish communities

Species traits are used to study the functional organization of fish communities for a range of reasons, from simply reducing data dimensionality to providing mechanistic explanations for observed variation in communities. Ecological and life history traits have been used to understand the basic ecology of fishes and predict (1) species and community responses to habitat and climate alteration, and (2) species extinction, species invasion, and community homogenization. Many approaches in this arena have been developed during the past three decades, but they often have not been integrated with related ecological concepts or subdisciplines, which has led to confusion in terminology. We review 102 studies of species traits and then summarize patterns in traits being used and questions being addressed with trait-based approaches. Overall, studies of fish–habitat relationships that apply habitat templates and hierarchical filters dominate our sample; the most frequently used traits are related to feeding. We define and show the relationships among key terms such as fundamental and realized niches; functional traits, performance, and fitness; tactic, trait-state, syndromes, and strategies; and guilds and functional groups. We propose accelerating research to (1) quantify trait plasticity, (2) identify traits useful for testing ecological hypotheses, (3) model habitat and biotic interactions in communities while explicitly accounting for phylogenetic relationships, (4) explore how traits control community assembly, and (5) document the importance of traits in fish– community responses to anthropogenic change and in delivering ecosystem services. Further synthesis of these topics is still needed to develop concepts, models, and principles that can unify the disparate approaches taken in trait-based analysis of fish communities, link fish community ecology to general community ecology, and inform sustainable management of ecosystems.

Conference Paper

Analysis of surface-water data network in Kansas for effectiveness in providing regional streamflow information

The surface water data network in Kansas was analyzed using generalized least squares regression for its effectiveness in providing regional streamflow information. The correlation and time-sampling error of the streamflow characteristic are considered in the generalized least squares method. Unregulated medium-flow, low-flow and high-flow characteristics were selected to be representative of the regional information that can be obtained from streamflow gaging station records for use in evaluating the effectiveness of continuing the present network stations, discontinuing some stations; and/or adding new stations. The analysis used streamflow records for all currently operated stations that were not affected by regulation and discontinued stations for which unregulated flow characteristics, as well as physical and climatic characteristics, were available. The state was divided into three network areas, western, northeastern, and southeastern Kansas, and analysis was made for three streamflow characteristics in each area, using three planning horizons. The analysis showed that the maximum reduction of sampling mean square error for each cost level could be obtained by adding new stations and discontinuing some of the present network stations. Large reductions in sampling mean square error for low-flow information could be accomplished in all three network areas, with western Kansas having the most dramatic reduction. The addition of new stations would be most beneficial for man-flow information in western Kansas, and to lesser degrees in the other two areas. The reduction of sampling mean square error for high-flow information would benefit most from the addition of new stations in western Kansas, and the effect diminishes to lesser degrees in the other two areas. Southeastern Kansas showed the smallest error reduction in high-flow information. A comparison among all three network areas indicated that funding resources could be most effectively used by discontinuing more stations in northeastern and southeastern Kansas and establishing more new stations in western Kansas. (Author's abstract)

Kansas