SEARCH · Geology Reports

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

USGS1989

Geologic map of the Latir Volcanic Field and adjacent areas, northern New Mexico

This map was first published as a printed edition in 1989. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. This map encompasses all or parts of ten 7.5 minute quadrangles in the Taos Range of the Sangre de Cristo Mountains in northern New Mexico. Geologic mapping was initiated in this area by the U.S. Geological Survey in response to its mandate under the Wilderness Act of 1964 to evaluate the mineral resource potential of the Latir and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area in the Carson National Forest. The mapping was later extended to adjacent areas in order to better understand the regional geology and geologic history of the range. The present map focuses on the early Tertiary (largely Oligocene) Latir Volcanic Field and plutonic rocks associated with it. The basement rocks in the map area are Paleoproterozic amphibolite-facies metasedimentary and metavolcanic rocks intruded by large bodies of quartz monzonite, granodiorite and gabbro dated at between 1,750 and 1,690 Ma. The basement rocks are locally overlain by Mississippian limestone or by Pennsylvanian and Permian redbeds. The basement rocks were thrust eastward across a thick section of similar late Paleozoic rocks along low-angle faults during the Laramide Orogeny. Post-Laramide erosion largely removed the sedimentary cover from the basement rocks and reduced the topography to a low-relief surface locally overlain by scattered lenses of Eocene to Oligocene shale, sandstone, and conglomerate. It was on this surface that the earliest rocks of the Latir Volcanic Field were deposited, beginning in the Oligocene, about 30 Ma. The early volcanic rocks comprise a thick sequence of andesite, dacite, and minor rhyolite, deposited as flows, breccia, and volcaniclastic sediments from numerous local volcanic centers; thin layers of rhyolite tuff are from distant eruptions, some probably in the San Juan Mountains. These volcanic rocks probably record early growth of an upper-crustal batholith. At 25 Ma enormous eruptions of peralkaline rhyolite ash-flow tuff were accompanied by collapse of the roof of the growing batholith to form the Questa Caldera, a volcanic depression at least 14 km across. The ash flows traveled for tens of kilometers from the caldera rims to form a widespread sheet of densely welded tuff; ash also fell back to fill the subsiding caldera depression. Concurrent extension along northwest-trending faults segmented the volcanic edifice and rotated the originally sub-horizontal layers, so that some are nearly vertical. Formation of the caldera was accompanied by further batholith growth, involving intrusion of large plutons of granite, granodiorite, and related rocks into both caldera fill and the adjacent rocks, including both the earlier volcanic rocks and the basement rocks. The large molybdenum deposit along the Red River east of Questa is related to the emplacement of one of these late granitic plutons. Intrusive activity continued into the Miocene. Development of the Rio Grande Rift beginning at about 15 Ma was accompanied by development of the north-south trending normal faults along the western foot of the Taos Range. The rift is filled with thousands of meters of clastic sediments interleaved with basalt flows, some as young as 3.6 Ma. The bounding faults of the rift cut the Questa Caldera so that the western part of the original structure is now deeply buried beneath the rift fill.

New Mexico↗

USGS1980

Modern sedimentary facies of the open Pacific coast and Pleistocene analogs from Montery Bay, California

Depositional processes and sedimentary structures of wave-dominated Pacific coastal environments vary systematically with water depth. The depth-limited open-coast facies identifiable by their sedimentary structures are the inner shelf, barred or nonbarred nearshore, beach, and coastal dune facies. These facies are most commonly preserved in shallowing-upward progradational sequences. The vertical sequence of sedimentary structures preserved in marine terrace deposits in the northern Monterey Bay region is very similar to that predicted on the basis of the modern facies. Few marine sediments deposited during the marine transgression that accompanied rising sea level were preserved. Most of the the marine and eolian sediments form a progradational sequence deposited mainly during intervals of falling sea level. In contrast, the sediments that form the adjacent fluvial terraces were deposited mainly during periods of rising sea level and became entrenched during the subsequent lowering of sea level. In combination, these fluvial, marine, and eolian deposits provide a record of a complete eustatic cycle. The recognition of the role of changing sea level in controlling patterns of coastal sedimentation and landform development during the Quaternary allows the development of a generalized model for Quaternary sedimentation along a wave-dominated coastline. The application of this model has aided in the interpretation of older Pleistocene sediments in the region (e.g. the Aromas Sand). It also has resulted in the recognition of at least eleven glacio-eustatic cycles preserved in the stratigraphic record of the Monterey Bay area during the Quaternary.

California↗

USGS1999

Laramide to Holocene structural development of the northern Colorado Front Range

The Rocky Mountain province of the United States is a classic basement-involved foreland orogen. Deformation during the Late Cretaceous to Eocene Laramide orogeny created an anastomosing system of basement-cored arches that bound the northern and eastern margins of the Colorado Plateau and the elliptical sedimentary basins of the Rockies. The tectonic mechanism for Laramide deformation remains controversial, with proposed mechanisms ranging from subcrustal shear during low-angle subduction (Bird, 1988, 1998; Hamilton, 1988) to detachment of the upper crust during plate collision to the west (Oldow and others, 1990; Erslev, 1993). The Rocky Mountains south of Wyoming have the additional complication of a period of mid-Tertiary igneous activity and sedimentation that coincides with Neogene extension along the Rio Grande rift. This field trip (Fig. 1) will explore the Laramide to Holocene structural development of the southern Rocky Mountains by examining the geologic record exposed in the northern Front Range of Colorado. The Front Range starts north of Canon City, Colorado, and trends north-northwest to Golden, Colorado. North of Golden, the range takes a more northerly trend toward the Wyoming border where it bifurcates into the north-trending Laramie Range (Brewer and others, 1982) and the north-northwest-trending Medicine Bow Range.

Colorado↗

USGS1988

Ferromanganese deposits from the Gulf of Alaska Seamount Province: Mineralogy, chemistry, and origin

Ferromanganese-oxide deposits dredged from four seamounts (Welker, Miller, Murray, and Patton) in the Gulf of Alaska Seamount Province include poorly crystallized microlaminated crusts on basalt substrate, well-crystallized Mn-oxide veins in epiclastic sedimentary rocks, and crystalline Mn-oxide layers and micronodules in phosphorite. The principal rock types dredged are alkali-basalt pillow fragments and tuffaceous conglomerate and sandstone. The glassy rims of pillow fragments, the glassy goundmass of large volcanic clasts, and the tuffaceous component of the sediment are altered to palagonite. Other low-temperature alteration products include phillipsite, smectite, and carbonate-apatite.Thick (10–50 mm) Fe–Mn crusts consist mainly of δ-MnO 2 ; straight and cuspate growth laminae indicate variable growth rates and periods of nondeposition. A larger number of detrital particles toward the top of thick crusts record the increasing influence of active volcanoes of the Aleutian arc during northwestward movement of the Pacific plate. Thick crusts on basalt substrate have higher Mn/Fe ratios and lower Co content than Fe–Mn crusts from low-latitude seamounts of the central Pacific region. Thin (< 10 mm) crusts on volcaniclastic substrate contain todorokite and birnessite and have higher Mn/Fe ratios, Ni, and Cu and lower Fe and Co than thick Gulf of Alaska crusts.Veins of todorokite and cryptomelane with complex internal structure occur in altered tuffaceous sandstone and conglomerate from Miller Seamount. Fibrous todorokite has a composition similar to those of other marine examples but may contain up to 7% Mn 2+ in M2 sites. Microprobe analysis of the marine cryptomelane indicates a composition that is approximately (K,Ba) 1–2 (Mn 4+ ,Co) 7–8 O 16 ∙ x (H 2 O).A third type of Fe–Mn deposit in phosphorite is an intimate mixture of todorokite (and minor δ-MnO 2 )-bearing layers and micronodules, carbonate-apatite, and phillipsite that encloses grains of altered volcanic glass and lithic fragments.The microlaminated structure, mineralogy (predominantly δ-MnO 2 ), and composition (Mn/Fe ratio and transition metal, rare earth element, U, and Th contents) of the thick crusts are characteristic of hydrogenetic Fe–Mn crusts elsewhere in the Pacific. Conversely, the crystallinity and chemical composition of the Mn-oxide veins and thin crusts indicate formation during diagenesis of the volcanogenic sediment substrate. Mn and other transition metals are mobilized during low-temperature oxidative alteration (palagonitization) of basaltic volcanic glass; the oxidation of Fe 2+ to Fe 3+ during palagonitization and the dissolution of the dilute biogenic fraction of the sediment combine to lower the Eh of ambient pore fluid and enhance the mobility of Mn 2+ . Diagenesis in the phosphatic sandstone from Patton Seamount involves organic-rich sediment and pore waters elevated in phosphorus owing to upwelling above a large volcanic edifice.

Alaska↗

USGS2026

Growth and erosion of volcanic islands since 1963 analyzed by multi-sensor satellite data and historical records

Most volcanic activity is taking place in the oceans. Depending on water depth, eruption recurrence times and volumes, a new island can form. The power of erosional forces, the type of erupted material and the efficiency of secondary processes determine the island’s lifetime. Since the famous eruption of Surtsey (Iceland) in 1963, at least another 23 volcanic islands have appeared. Some islands remained intact for years or decades, whereas others disappeared within just weeks or months. In this study, we analyzed satellite data to determine growth and erosion rates of the volcanic edifices related to these 24 islands. We combined multi-sensor (optical, thermal, radar) satellite data time series with information from literature and the Global Volcanism Program database. We developed a comprehensive dataset, including 19 parameters, on the islands’ lifetime, shape, area, volume, eruption style and duration, environmental conditions, development of sedimentary deposits, and the geomorphic evolution of the island over time. Our dataset is available in a database format. This database allows us to test eight hypotheses about factors influencing the islands’ lifetime. Our results show that instead of one single critical factor, a combination of different factors influences the life history of volcanic islands. For instance, we show that larger islands do not necessarily live longer. The mechanical properties of the eruption products affect the island’s structural integrity. Irrespective of the material, a minimum initial area of around 50,000 m 2 seems to be a reasonable threshold to give the island a chance to exist longer.

Bulletin of Volcanology↗

USGS2022

Assessing reproducibility in sedimentary macroscopic charcoal count data

Current understanding of global late Quaternary fire history is largely drawn from sedimentary charcoal data. Since publication, CharAnalysis increasingly has been relied upon as a robust method for analyzing these data. However, several underlying assumptions of the algorithm have not been tested. This study uses replicated charcoal count data to examine the assumption of Poisson distribution and reproducibility of peak detection. Results show <10% of the replicate counts are Poisson distributed, a maximum peak replication rate of 60%, and, for >90% of the data, intra-level count differences were larger than the threshold used to identify significance in inter-level differences. A pronounced “edge effect” was observed at the beginning and end of the records, cautioning against validation of results based on sections corresponding to the historical period. The proximal cause for low reproducibility is likely a lack of spatial randomness of charcoal particles at the scale of a core diameter. Until and unless decomposition methods can be developed that accommodate the observed limitations inherent in particle count data, best practices for interpreting charcoal records may be to rely on qualitative interpretations based on smoothed influx values and minimum particle count values in the hundreds.

Quaternary Research↗

USGS2010

Database of recent tsunami deposits

This report describes a database of sedimentary characteristics of tsunami deposits derived from published accounts of tsunami deposit investigations conducted shortly after the occurrence of a tsunami. The database contains 228 entries, each entry containing data from up to 71 categories. It includes data from 51 publications covering 15 tsunamis distributed between 16 countries. The database encompasses a wide range of depositional settings including tropical islands, beaches, coastal plains, river banks, agricultural fields, and urban environments. It includes data from both local tsunamis and teletsunamis. The data are valuable for interpreting prehistorical, historical, and modern tsunami deposits, and for the development of criteria to identify tsunami deposits in the geologic record.

Open-File Report↗

USGS2014

Sequence stratigraphy of the Upper Cambrian (Furongian; Jiangshanian and Sunwaptan) Tunnel City Group, Upper Mississippi Valley: Transgressing assumptions of cratonic flooding

New data from detailed measured sections permit comprehensive analysis of the sequence framework of the Furongian (Upper Cambrian; Jiangshanian and Sunwaptan stages) Tunnel City Group (Lone Rock Formation and Mazomanie Formation) of Wisconsin and Minnesota. The sequence-stratigraphic architecture of the lower part of the Sunwaptan Stage at the base of the Tunnel City Group, at the contact between the Wonewoc Formation and Lone Rock Formation, records the first part of complex polyphase flooding (Sauk III) of the Laurentian craton, at a scale smaller than most events recorded by global sea-level curves. Flat-pebble conglomerate and glauconite document transgressive ravinement and development of a condensed section when creation of accommodation exceeded its consumption by sedimentation. Thinly-bedded, fossiliferous sandstone represents the most distal setting during earliest highstand. Subsequent deposition of sandstone characterized by hummocky or trough cross-stratification records progradational pulses of shallower, storm- and wave-dominated environments across the craton before final flooding of Sauk III commenced with carbonate deposition during the middle part of the Sunwaptan Stage. Comparison of early Sunwaptan flooding of the inner Laurentian craton to published interpretations from other parts of North America suggests that Sauk III was not a single, long-term accommodation event as previously proposed.

Minnesota;Wisconsin↗

USGS1994

Sedimentary patterns across the Paleocene-Eocene boundary in the Atlantic and Gulf Coastal Plains of the United States

Fossiliferous clay and sand belonging to calcareous nannofossil Zones NP 9 (latest Paleocene) and NP 10 (earliest Eocene) are widespread in the US Gulf and Atlantic Coastal Plains. Although the thickness of Zone NP 9-NP 10 strata is several times greater in the eastern Gulf Coastal Plain than in the Atlantic Coastal Plain, the hiatus that usually is present between these two zones in inner neritic strata is of longer duration in the Gulf Coast. Although 6 sequences are found in Zones NP 10-NP 11 in both the Atlantic and Gulf Coastal Plains, the number of sequences in each NP zone differs in the 2 areas. There is continuous deposition across the Zone NP 9-NP 10 boundary only in the northern Atlantic Coastal Plain, where middle to outer neritic deposits record the presence of several latest Paleocene (upper Zone NP 9) events that occurred at approximately 55.2 Ma.

Atlantic Coastal Plain, Gulf Coastal Plain↗

USGS1980

Comparison of bed form variance spectra within a meander bend during flood and average discharge

Time series analysis of streambed elevation in a meander bend along the Congaree River was used to determine the changes in bed form population succeeding a 16-year flood event. Bed forms observed during the flood event had a significantly greater total height variance than bed forms observed at the same location one week later. Variance spectra were computed for a 595 m longitudinal profile. The data indicate that: a) the bed form variance for the flood record is significantly greater for all wavelengths from 5 to 30 m; b) no well-demarcated bed form classes were present during the survey times, pointing to the possible existence of a continuum of bed form sizes rather than well-defined classes; and c) bed forms produced by the flood discharge were rapidly altered as the stage returned toward average level.

Journal of Sedimentary Petrology↗

USGS2011

The Edwardsburg Formation and related rocks, Windermere Supergroup, central Idaho, USA

In central Idaho, Neoproterozoic stratified rocks are engulfed by the Late Cretaceous Idaho batholith and by Eocene volcanic and plutonic rocks of the Challis event. Studied sections in the Gospel Peaks and Big Creek areas of west-central Idaho are in roof pendants of the Idaho batholith. A drill core section studied from near Challis, east-central Idaho, lies beneath the Challis Volcanic Group and is not exposed at the surface. Metamorphic and deformational overprinting, as well as widespread dismembering by the younger igneous rocks, conceals many primary details. Despite this, these rocks provide important links for regional correlations and have produced critical geochronological data for two Neoproterozoic glacial periods in the North American Cordillera. At the base of the section, the more than 700-m-thick Edwardsburg Formation (Fm.) contains interlayered diamictite and volcanic rocks. There are two diamictite-bearing members in the Edwardsburg Fm. that are closely related in time. Each of the diamictites is associated with intermediate composition tuff or flow rocks and the diamictites are separated by mafic volcanic rocks. SHRIMP U–Pb dating indicates that the lower diamictite is about 685±7 Ma, whereas the upper diamictite is 684±4 Ma. The diamictite units are part of a cycle of rocks from coarse clastic, to fine clastic, to carbonate rocks that, by correlation to better preserved sections, are thought to record an older Cryogenian glacial to interglacial period in the northern US Cordillera. The more than 75-m-thick diamictite of Daugherty Gulch is dated at 664±6 Ma. This unit is preserved only in drill core and the palaeoenvironmental interpretation and local stratigraphic relations are non-unique. Thus, the date for this diamictite may provide a date for a newly recognized glaciogenic horizon or may be a minimum age for the diamictite in the Edwardsburg Fm. The c. 1000-m-thick Moores Lake Fm. is an amphibolite facies diamictite in which glacial features have not been observed. However, it is part of a sedimentary cycle from unsorted siliclastic deposits to mud and carbonate deposits. Using lithostratigraphy and available geochronology, the Moores Lake Fm. is correlated with a younger succession of Cryogenian glaciogenic rocks in southeastern Idaho. Traditional correlations of Neoproterozoic rocks in the Cordillera recognize two levels of Cryogenian diamictites. The Edwardsburg and Moores Lake diamictites along the middle Cordillera fit well into the scenario of two glacial events. Because of the correlations, dates that provide ages for the diamictites in central Idaho (and corroborated in southeastern Idaho, Link & Fanning 2008) could constrain the age of correlated glaciogenic deposits elsewhere in the Cordillera. However, in the absence of dates for the glaciogenic diamictites in Canadian and southern US Cordilleran sections, the correlations are considered possible but uncertain.

Idaho↗

USGS2014

Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and Darwin Canyon Formations) representing part of a deep-water turbidite basin filled primarily by fine-grained siliciclastic sediment derived from cratonal sources to the east. Deformation and sedimentation along the western part of this basin continued into late Permian time. The culminating phase was part of a regionally extensive late Permian thrust system that included the Marble Canyon thrust fault just west of the present map area.

California↗

USGS2011

Chapter 39 The Edwardsburg Formation and related rocks, Windermere Supergroup, central Idaho, USA

Idaho↗

USGS1999

Late Neogene sedimentary facies and sequences in the Pannonian Basin, Hungary

This paper is part of the special publication No.156, The Mediterranean basins: Tertiary extension within the Alpine Orogen. (eds B.Durand, L. Jolivet, F.Horvath and M.Seranne). Detailed sedimentological, facies and numerical cycle analysis, combined with magnetostratigraphy, have been made in a number of boreholes in the Pannonian Basin, in order to study the causes of relative water-level changes and the history of the basin subsidence. Subsidence and infilling of the Pannonian Basin, which was an isolated lake at that time occurred mainly during the Late Miocene and Pliocene. The subsidence history was remarkably different in the individual sub-basins: early thermal subsidence was interrupted in the southern part of the basin, while high sedimentation rate and continuous subsidence was detected in the northeastern sub-basin. Three regional unconformities were detected in the Late Neogene Pannonian Basin fill, which represent 0.5 and 7.5 Ma time spans corresponding to single and composite unconformities. Consequently two main sequences build up the Late Neogene Pannonian Basin fill: a Late Miocene and a Pliocene one. Within the Late Miocene sequence there are smaller sedimentary cycles most probably corresponding to climatically driven relative lake-level changes in the Milankovitch frequency band. Considering the periods, the estimated values for precession and eccentricity in this study (19 and 370 ka) are close to the usually cited ones. In the case of obliquity the calculated period (71 ka) slightly deviates from the generally accepted number. Based on the relative amplitudes of oscillations, precession (sixth order) and obliquity (fifth order) cycles had the most significant impact on the sedimentation. Eccentricity caused cycles (fourth order) are poorly detectable in the sediments. The longer term (third order) cycles had very slight influence on the sedimentation pattern. Progradation, recorded in the Late Miocene sequence, correlates poorly in time within the basin. The dominant controls of this process probably were changes of basin subsidence rate and the very high sedimentation rate. The slow, upward trend of silt and sand bed thickness as well as that of the grain size also reflects the local progradation.

Geological Society Special Publication↗

USGS1994

Geology of the Blue Mountains region of Oregon, Idaho, and Washington: Stratigraphy, physiography, and mineral resources of the Blue Mountains region

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Idaho, Oregon, Washington↗

USGS1985

A primer on trace metal-sediment chemistry

In most aquatic systems, concentrations of trace metals in suspended sediment and the top few centimeters of bottom sediment are far greater than concentrations of trace metals dissolved in the water column. Consequently, the distribution, transport, and availability of these constituents can not be intelligently evaluated, nor can their environmental impact be determined or predicted solely through the sampling and analysis of dissolved phases. This Primer is designed to acquaint the reader with the basic principles that govern the concentration and distribution of trace metals associated with bottom and suspended sediments. The sampling and analysis of suspended and bottom sediments are very important for monitoring studies, not only because trace metal concentrations associated with them are orders of magnitude higher than in the dissolved phase, but also because of several other factors. Riverine transport of trace metals is dominated by sediment. In addition, bottom sediments serve as a source for suspended sediment and can provide a historical record of chemical conditions. This record will help establish area baseline metal levels against which existing conditions can be compared. Many physical and chemical factors affect a sediment's capacity to collect and concentrate trace metals. The physical factors include grain size, surface area, surface charge, cation exchange capacity, composition, and so forth. Increases in metal concentrations are strongly correlated with decreasing grain size and increasing surface area, surface charge, cation exchange capacity, and increasing concentrations of iron and manganese oxides, organic matter, and clay minerals. Chemical factors are equally important, especially for differentiating between samples having similar bulk chemistries and for inferring or predicting environmental availability. Chemical factors entail phase associations (with such sedimentary components as interstitial water, sulfides, carbonates, and organic matter) and ways in which the metals are entrained by the sediments (such as adsorption, complexation, and within mineral lattices).

Water Supply Paper↗

USGS1991

Isotopic evidence for early Proterozoic age of the Idono Complex, west-central Alaska

The Idono Complex of west-central Alaska is a fault-bounded, fragment of Early Proterozoic continental crust surrounded by overlap assemblages and younger terranes accreted in Mesozoic time. It is composed of granitic to dioritic orthogneiss, amphibolite, and metasedimentary rocks. Trace element compositions of the granitoids and amphibolite suggest rock formation in a subduction-related volcanic arc terrain. Nine zircon fractions from three samples of granitoid orthogneiss define a U-Pb discordia line intersecting concordia at and . The upper and lower intercepts are interpreted, respectively, as approximations of the time of granitoid crystallization and major episodic Pb-loss. The lower intercept age is similar to that indicated by some hornblende and biotite K-Ar ages. Other biotite, hornblende, and white mica K-Ar ages record later isotopic disturbance in Early Cretaceous time. Nd isotopic compositions at 2.06 Ga for tonalite orthogneiss ( ) and amphibolite ( and +2.3) indicate that Early Proterozoic crust formation in the Idono Complex involved significant additions of mantle-derived magma. These rocks yield (depleted mantle) model ages of 2.0 to 2.1 Ga, similar to the U-Pb zircon upper intercept age. Involvement of Archean crust in the formation of at least some rocks of the Idono Complex is indicated by a granitic orthogneiss ( ), which yields a model age of 2.5 Ga. The ~2.06-Ga age of the Idono Complex is similar to that indicated for provenance(s) of widely distributed sedimentary rocks in western North America and may represent a fragment of the North American craton displaced by northward movement of the Pacific plate. At such, rocks of the Idono Complex may provide important insights into both Early Proterozoic evolution along the craton margin, and subsequent displacements.

Journal of Geology↗

USGS2014

Potash: a global overview of evaporate-related potash resources, including spatial databases of deposits, occurrences, and permissive tracts

Potash is mined worldwide to provide potassium, an essential nutrient for food crops. Evaporite-hosted potash deposits are the largest source of salts that contain potassium in water-soluble form, including potassium chloride, potassium-magnesium chloride, potassium sulfate, and potassium nitrate. Thick sections of evaporitic salt that form laterally continuous strata in sedimentary evaporite basins are the most common host for stratabound and halokinetic potash-bearing salt deposits. Potash-bearing basins may host tens of millions to more than 100 billion metric tons of potassium oxide (K 2 O). Examples of these deposits include those in the Elk Point Basin in Canada, the Pripyat Basin in Belarus, the Solikamsk Basin in Russia, and the Zechstein Basin in Germany. This report describes a global, evaporite-related potash deposits and occurrences database and a potash tracts database. Chapter 1 summarizes potash resource history and use. Chapter 2 describes a global potash deposits and occurrences database, which contains more than 900 site records. Chapter 3 describes a potash tracts database, which contains 84 tracts with geology permissive for the presence of evaporite-hosted potash resources, including areas with active evaporite-related potash production, areas with known mineralization that has not been quantified or exploited, and areas with potential for undiscovered potash resources. Chapter 4 describes geographic information system (GIS) data files that include (1) potash deposits and occurrences data, (2) potash tract data, (3) reference databases for potash deposit and tract data, and (4) representative graphics of geologic features related to potash tracts and deposits. Summary descriptive models for stratabound potash-bearing salt and halokinetic potash-bearing salt are included in appendixes A and B, respectively. A glossary of salt- and potash-related terms is contained in appendix C and a list of database abbreviations is given in appendix D. Appendix E describes GIS data files, and appendix F is a guide to using the geodatabase.

Scientific Investigations Report↗