Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

Geologic map of the Bateman Spring Quadrangle, Lander County, Nevada

This 1:24,000-scale geologic map of the Bateman Spring 7.5-minute quadrangle in Lander County, Nevada contains descriptions of 24 geologic units and one cross section. Accompanying text includes full unit descriptions and references. This quadrangle includes lower Paleozoic siliciclastic sedimentary rocks of the Roberts Mountain allochthon, Miocene intrusive dikes, alluvial deposits of the northern Shoshone Range piedmont, and riverine deposits of the Reese and Humboldt rivers. Significant findings include: refined age estimates for the Ordovician-Cambrian Valmy Formation and Devonian Slaven Chert, based on new fossil information; and detailed mapping of late Quaternary fault traces along the Shoshone Range fault system.

Nevada Bureau of Mines and Geology Map↗

Hydrogeologic framework, groundwater movement, and water budget in the Chambers-Clover Creek watershed and vicinity, Pierce County, Washington

This report presents information used to characterize the groundwater-flow system in the Chambers-Clover Creek Watershed and vicinity, and includes descriptions of the geology and hydrogeologic framework; groundwater recharge and discharge; groundwater levels and flow directions; seasonal groundwater level fluctuations; interactions between aquifers and the surface-water system; and a water budget. The study area covers about 706 square miles in western Pierce County, Washington, and extends north to the Puyallup River, southwest to the Nisqually River, and is bounded on the south and east by foothills of the Cascade Range and on the west by Puget Sound. The area is underlain by a northwest-thickening sequence of unconsolidated glacial and interglacial deposits which overlie sedimentary and volcanic bedrock units that crop out in the foothills along the southern and southeastern margin of the study area. Geologic units were grouped into 11 hydrogeologic units consisting of aquifers, confining units, and an underlying bedrock unit. A surficial hydrogeologic unit map was developed and used with well information from 450 drillers’ logs to construct 6 hydrogeologic sections, and unit extent and thickness maps. Groundwater in unconsolidated glacial and interglacial aquifers generally flows to the northwest towards Puget Sound, and to the north and northeast towards the Puyallup River. These generalized flow patterns likely are complicated by the presence of low permeability confining units that separate discontinuous bodies of aquifer material and act as local groundwater-flow barriers. Water levels in wells completed in the unconsolidated hydrogeologic units show seasonal variations ranging from less than 1 to about 50 feet. The largest groundwater-level fluctuation (78 feet) observed during the monitoring period (March 2007–September 2008) was in a well completed in the bedrock unit. Synoptic streamflow measurements made in September 2007 and July 2008 indicated a total groundwater discharge to streams in the study area of 87,310 and 92,160 acre-feet per year, respectively. The synoptic streamflow measurements show a complex pattern of gains and losses to streamflows that varies throughout the study area, and appears to be influenced in places by local topography. Groundwater discharge occurs at numerous springs in the area and the total previously reported discharge of springs in the area is approximately 80,000 acre-feet per year. There are, in addition, many unmeasured springs and the total spring discharge in the area is unknown. The water-budget area (432 mi 2 located within the larger study area) received an annual average (September1, 2006, to August 31, 2008) of about 1,025,000 acre-ft or about 45 inches of precipitation a year. About 44 percent of precipitation enters the groundwater system as recharge. Almost one-half of this recharge (49 percent) discharges to the Puyallup and Nisqually Rivers and leaves the groundwater system as submarine groundwater discharge to Puget Sound. The remaining groundwater recharge discharges to streams (20 percent) and springs (18 percent) or is withdrawn from wells (13 percent)

Washington↗

Modern coastal mangrove swamp stratigraphy and the ideal cyclothem

The general stratigraphy of the “ideal” cyclothem of Late Paleozoic age can be recognized in a modern succession of sedimentary units underlying the coastal mangrove swamps of southwestern Florida. Because coal deposition is associated with the formation of cyclothems, this stratigraphic similarity has geologic importance with respect to coal formation. The lower part of the succession in Florida consists of nonmarine sediments, the middle part of brackish-water or fresh-water mangrove peat, and the upper part of brackish-water and marine units. This sequence of sediments records a relative rise in sea level. In comparison, the lower part of the ideal cyclothem consists basically of nonmarine units, the central sedimentary member is coal, and the upper units are brackish-water and marine sediments. The ideal cyclothem is thought to have formed in part in a deltaic environment and to record a periodic fluctuation in terrigenous sediment supply and a relative rise in sea level. In contrast, southwestern Florida has essentially no deltas, as most of its paralic sediments are derived from coastal sources. In view of this, the stratigraphic similarity noted above must reflect a partial duplication of sedimentary environments brought about by a relative rise in sea level across a low coastal platform supporting peat-depositing paralic and fresh-water swamps and forests. This conclusion tends to support the point of view that the coal member of some cyclothems formed in a swampy environment penecontemporaneously with a relative rise in sea level. The coal member, therefore, is in part a transgressive unit.

Florida↗

Shallow geologic framework of the Mississippi Sound and the potential for sediment resources

The Mississippi Sound, an estuarine environment located between the mainland and barrier islands bordering the northern Gulf of America (formerly the Gulf of Mexico), serves as a vital ecosystem for the States of Mississippi and Alabama. Spanning approximately 100 kilometers from east to west and covering 1,400 square kilometers, the sound is home to marine industry and ports, and its shallow and brackish waters sustain a diverse array of marine life. Barrier islands along the southern edge of the sound separate the microtidal estuary from the Gulf of America. This protection from gulf wave action mediates current flow within the sound, resulting in predominantly fine-grained sediment deposition along the seafloor. This study, conducted by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, provides insight on fluvial and tidal processes spanning the past 5,000 years. The report synthesizes existing research to provide a comprehensive overview of the sound geology, from Pleistocene origins to present-day morphology, and utilizes high-resolution single channel seismic profiles and sediment data to identify and map sedimentary deposits and morphologic features at and below the seafloor. Despite its ecological significance, the Mississippi Sound faces environmental challenges, including water-quality issues, habitat degradation, storm-induced erosion, and the ongoing threats of sea-level rise and environmental changes. This study uses the present-day understanding of the sound's geology to inform coastal management decisions, hazard assessment, and potential mineral resources.

Louisiana, Mississippi↗

Three-dimensional velocity structure of Siletzia and other accreted terranes in the Cascadia forearc of Washington

Eocene mafic crust with high seismic velocities underlies much of the Oregon and Washington forearc and acts as a backstop for accretion of marine sedimentary rocks from the obliquely subducting Juan de Fuca slab. Arc-parallel migration of relatively strong blocks of this terrane, known as Siletzia, focuses upper crustal deformation along block boundaries, which are potential sources of earthquakes. In a three-dimensional velocity model of coastal Washington, we have combined surface geology, well data, and travel times from earthquakes and controlled source seismic experiments to resolve the major boundaries of the Siletz terrane with the adjacent accreted sedimentary prism and volcanic arc. In southern Washington and northern Oregon the Siletz terrane appears to be a thick block (???20 km) that extends west of the coastline and makes a high-angle contact with the offshore accreted sedimentary prism. On its east flank the high-velocity Siletz terrane boundary coincides with an en echelon zone of seismicity in the arc. In northern Washington the western edge of Siletzia makes a lower-angled, fault-bound contact with the accretionary prism. In addition, alternating, east-west trending uplifts and downwarps of the Siletz terrane centered on the antiformal Olympic Mountains may reflect focusing of north-south compression in the northern part of the Siletz terrane. This compressional strain may result from northward transport and clockwise rotation of the Siletz terrane into the relatively fixed Canadian Coast Mountains restraining bend along the coast.

Oregon, Washington↗

Stratigraphic framework of sediment-starved sand ridges on a mixed siliciclastic/carbonate inner shelf; west-central Florida

Seismic reflection profiles and vibracores have revealed that an inner shelf, sand-ridge field has developed over the past few thousand years situated on an elevated, broad bedrock terrace. This terrace extends seaward of a major headland associated with the modern barrier-island coastline of west-central Florida. The overall geologic setting is a low-energy, sediment-starved, mixed siliciclastic/carbonate inner continental shelf supporting a thin sedimentary veneer. This veneer is arranged in a series of subparallel, shore-oblique, and to a minor extent, shore-parallel sand ridges. Seven major facies are present beneath the ridges, including a basal Neogene limestone gravel facies and a blue-green clay facies indicative of dominantly authigenic sedimentation. A major sequence boundary separates these older units from Holocene age, organic-rich mud facies (marsh), which grades upward into a muddy sand facies (lagoon or shallow open shelf/seagrass meadows). Cores reveal that the muddy shelf facies is either in sharp contact or grades upward into a shelly sand facies (ravinement or sudden termination of seagrass meadows). The shelly sand facies grades upward to a mixed siliciclastic/carbonate facies, which forms the sand ridges themselves. This mixed siliciclastic/carbonate facies differs from the sediment on the beach and shoreface, suggesting insignificant sediment exchange between the offshore ridges and the modern coastline. Additionally, the lack of early Holocene, pre-ridge facies in the troughs between the ridges suggests that the ridges themselves do not migrate laterally extensively. Radiocarbon dating has indicated that these sand ridges can form relatively quickly (???1.3 ka) on relatively low-energy inner shelves once open-marine conditions are available, and that frequent, high-energy, storm-dominated conditions are not necessarily required. We suggest that the two inner shelf depositional models presented (open-shelf vs. migrating barrier-island) may have co-existed spatially and/or temporally to explain the distribution of facies and vertical facies contacts. ?? 2003 Elsevier B.V. All rights reserved.

Marine Geology↗

Geologic map of the Nepenthes Planum Region, Mars

This map product contains a map sheet at 1:1,506,000 scale that shows the geology of the Nepenthes Planum region of Mars, which is located between the cratered highlands that dominate the southern hemisphere and the less-cratered sedimentary plains that dominate the northern hemisphere. The map region contains cone- and mound-shaped landforms as well as lobate materials that are morphologically similar to terrestrial igneous or mud vents and flows. This map is part of an informal series of small-scale (large-area) maps aimed at refining current understanding of the geologic units and structures that make up the highland-to-lowland transition zone. The map base consists of a controlled Thermal Emission Imaging System (THEMIS) daytime infrared image mosaic (100 meters per pixel resolution) supplemented by a Mars Orbiter Laser Altimeter (MOLA) digital elevation model (463 meters per pixel resolution). The map includes a Description of Map Units and a Correlation of Map Units that describes and correlates units identified across the entire map region. The geologic map was assembled using ArcGIS software by Environmental Systems Research Institute ( http://www.esri.com ). The ArcGIS project, geodatabase, base map, and all map components are included online as supplemental data.

Scientific Investigations Map↗

Plate boundary trench retreat and dextral shear drive intracontinental fault-slip histories: Neogene dextral faulting across the Gabbs Valley and Gillis Ranges, Central Walker Lane, Nevada

The spatial-temporal evolution of intracontinental faults and the forces that drive their style, orientation, and timing are central to understanding tectonic processes. Intracontinental NW-striking dextral faults in the Gabbs Valley–Gillis Ranges (hereafter referred to as the GVGR), Nevada, define a structural domain known as the eastern Central Walker Lane located east of the western margin of the North American plate. To consider how changes in boundary type along the western margin of the North American plate influenced both the initiation and continued dextral fault slip to the present day in the GVGR, we combine our new detailed geologic mapping, structural studies, and 40 Ar/ 39 Ar geochronology with published geologic maps to calculate early to middle Miocene dextral fault-slip rates. In the GVGR, Mesozoic basement is nonconformably overlain by a late Oligocene to Miocene sequence dominated by tuffs, lavas, and sedimentary rocks. These rocks are cut and offset by four primary NW-striking dextral faults, from east to west the Petrified Spring, Benton Spring, Gumdrop Hills, and Agai Pah Hills–Indian Head faults. A range of geologic markers, including tuff- and lava-filled paleovalleys, the southern extent of lava flows, and a normal fault, show average dextral offset magnitudes of 9.6 ± 1.1 km, 7.0 ± 1.7 km, 9.7 ± 1.0 km, and 4.9 ± 1.1 km across the four faults, respectively. Cumulative dextral offset across the GVGR is 31.2 ± 2.3 km. Initiation of slip along the Petrified Spring fault is tightly bracketed between 15.99 ± 0.05 Ma and 15.71 ± 0.03 Ma, whereas slip along the other faults initiated after 24.30 ± 0.05 Ma to 20.14 ± 0.26 Ma. Assuming that slip along all four faults initiated at the same time as the Petrified Spring fault yields calculated dextral fault-slip rates of 0.4 ± 0.1–0.6 ± 0.1 mm/yr, 0.4 ± 0.1–0.5 ± 0.1 mm/yr, 0.6 ± 0.1 mm/yr, and 0.3 ± 0.1 mm/yr on the four faults, respectively. Middle Miocene initiation of dextral fault slip across the GVGR overlaps with the onset of normal slip along range-bounding faults in the western Basin and Range to the north and the northern Eastern California shear zone to the south. Based on this spatial-temporal relationship, we propose that dextral fault slip across the GVGR defines a kinematic link or accommodation zone between the two regions of extension. At the time of initiation of dextral slip across the GVGR, the plate-boundary setting to the west was characterized by subduction of the Farallon plate beneath the North American plate. To account for the middle Miocene onset of extension across the Basin and Range and dextral slip in the GVGR, we hypothesize that middle Miocene trench retreat drove westward motion of the Sierra Nevada and behind it, crustal extension across the Basin and Range and NW-dextral shear within the GVGR. During the Pliocene, the plate boundary to the west changed to NW-dextral shear between the Pacific and North American plates, which drove continued dextral slip along the same faults within the GVGR because they were fortuitously aligned subparallel to plate boundary motion.

Nevada↗

Generalized geology and structure of the Winkelman 15-minute quadrangle and vicinity, Pinal and Gila Counties, Arizona

A. northwest-trending belt of steeply east-dipping Precambrian and Paleozoic sedimentary rocks extends across the Winkelman 15-minute quadrangle and separates areas of contrasting structures. To the southwest for 60 mi is an expanse of Precambrian basement, largely granite; to the northeast the Precambrian and Paleozoic sedimentary rocks are gently tilted and intricately faulted. The structure within the Winkelman 15-minute quadrangle is interpreted as a monocline separated into en echelon segments by strike-slip and normal faults. Other monoclines lie-to the north and northwest. Most of the tilting that formed the monoclines occurred after deposition of the early(?) Miocene San Manuel Formation. Structural features that repeat the Precambrian and Paleozoic sedimentary rocks within the area and that resemble high-angle faults are believed to have formed as low-angle thrusts, tilted to their present nearly vertical position during development of the monoclines. Structural features that are younger than the monoclines include low-angle gravity slide surfaces which are older than the high-angle normal faults that formed the basin-and-range topography on which the Pliocene sediments were deposited.

Arizona↗

Hydrogeologic framework, groundwater movement, and water budget in the Puyallup River Watershed and vicinity, Pierce and King Counties, Washington

This report presents information used to characterize the groundwater-flow system in the Puyallup River Watershed and vicinity, and includes descriptions of the geology and hydrogeologic framework; groundwater recharge and discharge; groundwater levels and flow directions; seasonal groundwater level fluctuations; interactions between aquifers and the surface-water system; and a water budget. The study area covers about 1,220 square miles in northern Pierce and southern King Counties, Washington; extends north to the Green River and Auburn Valley and southwest to the Puyallup River and adjacent uplands; and is bounded on the south and east by foothills of the Cascade Range and on the west by Puget Sound. The area is underlain by a northwest-thickening sequence of unconsolidated glacial and interglacial deposits, which overlie sedimentary and volcanic bedrock units that crop out in the foothills along the southern and eastern margin of the study area. Geologic units were grouped into 13 hydrogeologic units consisting of aquifers, confining units, and an underlying bedrock unit. A surficial hydrogeologic unit map was developed and used with well information from 1,012 drillers’ logs to construct 8 hydrogeologic sections, and unit extent and thickness maps. Groundwater in unconsolidated glacial and interglacial aquifers generally flows to the northwest towards Puget Sound, and to the north and northeast towards the Puyallup River, White River, and Green River valleys. These generalized flow patterns are complicated by the presence of low permeability confining units and bedrock that separate discontinuous bodies of aquifer material and act as local groundwater-flow barriers. Water levels in wells completed in the unconsolidated hydrogeologic units show seasonal variations ranging from less than 1 to about 32 feet during the monitoring period (March 2011–March 2013). Synoptic streamflow measurements made in October 2011 and October 2012 indicated a total groundwater discharge to streams in the water-budget area (520 square miles located within the larger study area) of at least 349,000 and 280,000 acre-feet per year, respectively. Annual groundwater discharge to streams likely exceeds these values because streamflow measurements were made during the dry, late-summer and early-autumn period when groundwater levels typically are at annual lows. Most stream reaches in the study area either gain flow from groundwater discharge or exhibit near-neutral conditions with no substantial gain or loss of flow. Groundwater discharge occurs at numerous springs in the area; the total reported discharge of springs in the area is approximately 80,300 acre-feet per year. The water-budget area received about 1,428,000 acre-feet or about 52 inches of precipitation per year (January 1, 2011, to December 31, 2012). About 41 percent of precipitation enters the groundwater system as recharge. Seven percent of this recharge is withdrawn from wells and the remainder leaves the groundwater system as discharge to rivers, discharge to springs, or submarine discharge to Puget Sound, or exits the study area through subsurface flow in the Green River valley.

Washington↗

Paleogene geology and chronology of southwestern Umnak Island, Aleutian Islands, Alaska

The rocks of southwestern Umnak Island (Nikolski area) consist mainly of a slightly deformed marine sedimentary sequence intruded by hypabyssal quartz diorite sills and small plutons. Laminated and thin-bedded argillaceous and tuffaceous mudstone and siltstone reflect volcanic arc sedimentation from late Eocene to early Oligocene time. Zeolite facies minerals formed during diagenesis include heulandite, analcime, quartz, chlorite, and smectite. Radiometric dates from sill rock and plutons yield apparent ages of about 30 Ma, i.e, middle Oligocene. Chemical data from igneous rocks exhibit calc-alkaline and tholeiitic volcanic arc differentiation trends. Dikes of pyroxene basalt yield K/Ar apparent ages as old at 17 Ma, and a columnar-jointed plug of pyroxene basalt is as young as 1 Ma. The fossil ages and radiometric dates from southwestern Umnak Island are similar to those reported from other central and eastern Aleutian islands, and indicate uniformity in the chronology and tectonic development of the archipelago during the Paleogene. Paleomagnetic data suggest possible northward movement but remain equivocal and more work is indicated.

Alaska↗

Pre-Cambrian geology of the Norway Lake area, Dickinson County, Michigan

The Norway Lake area straddles the south margin of the Sagola basin, an embayment of Ruronian sedimentary rocks into the west side of a complex of crystalline and sedimentary rocks of pre-Ruronian age. The north part of the Norway Lake area is underlain by the Randville dolomite, an unnamed succession of slates, Vulcan iron-formation, and interbedded slates and graywackes of the Sagola basin. The Sturgeon quartzite has not been definitely recognized in the Norway Lake area. The Handville dolomite is more than 800 feet thick and can be subdivided into upper and lower dolomite members separated by a slate member. The Vulcan iron-formation and the footwall slates are exposed only in the Deerhunt exploration. A thick section of red and gray slates with interbedded graywacke, of probable Upper Huronian age, underlies the northwest part of the mapped area. The south part of the Norway Lake area is underlain by granite gneiss, an arkose series, and schists, all of pre-Huronian age. The principal structural elements of the Norway Lake area are high angle faults, and such faults form most of the boundary between Huronian and pre-Huronian rocks in the area. The structure of the Huronian rocks. particularly in the vicinity of the Deerhunt exploration, cannot be determined with certainty on the basis of information now available. Magnetic anomalies were found to be associated with the slate member of the Randville dolomite, basalt interbedded with the arkose series, and a magnetite-bearing member in hornblende schist. It is possible that economic deposits of iron ore occur within the mapped area. However, exploration will be tedious and costly because of the structural complexity of the area and the paucity of exposures. Furthermore, the absence of strong magnetic anomalies, such as typically are present in areas known to be underlain by Vulcan iron-formation, suggests that the iron-formation is not present in abundance; in fact, it may be limited to the immediate vicinity of the Deerhunt exploration. Field mapping and petrographic examination do not provide data to determine whether the granite gneiss formed from a magma. Chemical analysis of one sample suggests that it was formed from rocks of the earth's crust rather than by fractional crystallization of a basaltic magma. The original feldspars of the granite gneiss were probably anorthoclase and analbite. During uplift and denudation these were changed to microcline microperthite and albite. These feldspars were contributed to the arkose series. During regional metamorphism of the granite gneiss and arkose replacement type microperthite and secondary perthite were formed, probably by redistribution of feldspars already present tither than by metasomatism.

Michigan↗

Geologic field photograph map of the Grand Canyon region, 1967–2010

The Grand Canyon geologic field photograph collection contains 1,211 geotagged photographs collected during 43 years of geologic mapping from 1967 to 2010. The photographs document some key geologic features, structures, and rock unit relations that were used to compile nine geologic maps of the Grand Canyon region published at 1:100,000 scale, and many more maps published at 1:24,000 scale. Metadata for each photograph include description, date captured, coordinates, and a keyword system that places each photograph in one or more of the following categories: arches and windows, breccia pipes and collapse structures, faults and folds, igneous rocks, landslides and rockfalls, metamorphic rocks, sedimentary rocks, sinkholes, and springs and waterfalls. Original photograph slides are available at the Northern Arizona University Cline Library Special Collections and Archives. The Geologic Field Photograph Map of the Grand Canyon Region, 1967–2010, is an interactive online map application that shows clusters of photograph thumbnails and popup windows that scale as users pan, zoom, and click around the map. The photographs can be filtered by category, searched based on date range, description, and keywords, and (or) downloaded. All information populated within the map is served from a ScienceBase record of the Grand Canyon field photograph collection that can be accessed at https://doi.org/10.5066/F7WS8SHW .

Arizona↗

The influence of El Niño-Southern Oscillation (ENSO) cycles on wave-driven sea-floor sediment mobility along the central California continental margin

Ocean surface waves are the dominant temporally and spatially variable process influencing sea floor sediment resuspension along most continental shelves. Wave-induced sediment mobility on the continental shelf and upper continental slope off central California for different phases of El Niño-Southern Oscillation (ENSO) events was modeled using monthly statistics derived from more than 14 years of concurrent hourly oceanographic and meteorologic data as boundary input for the Delft SWAN wave model, gridded sea floor grain-size data from the usSEABED database, and regional bathymetry. Differences as small as 0.5 m in wave height, 1 s in wave period, and 10° in wave direction, in conjunction with the spatially heterogeneous unconsolidated sea-floor sedimentary cover, result in significant changes in the predicted mobility of continental shelf surficial sediment in the study area. El Niño events result in more frequent mobilization on the inner shelf in the summer and winter than during La Niña events and on the outer shelf and upper slope in the winter months, while La Niña events result in more frequent mobilization on the mid-shelf during spring and summer months than during El Niño events. The timing and patterns of seabed mobility are addressed in context of geologic and biologic processes. By understanding the spatial and temporal variability in the disturbance of the sea floor, scientists can better interpret sedimentary patterns and ecosystem structure, while providing managers and planners an understanding of natural impacts when considering the permitting of offshore activities that disturb the sea floor such as trawling, dredging, and the emplacement of sea-floor engineering structures.

California↗

Stratigraphic significance of siliceous microfossils collected during NAUTIPERC dives (off Peru, 5 °-6°S)

The geological evolution of the northern Peru convergent margin can be traced using samples collected during deep-sea dives of the submersible Nautile . In the Paita area (5°–6°S), the sedimentary sequence was intensively sampled along the main scarp of the middle slope area. It consists of Upper Miocene (7–9 Ma) to Pleistocene siltstone, sandstone and rare dolostone. The age distribution of these samples is the basis for a new geologic interpretation of the multichannel seismic line CDP3. Siliceous microfossils (both diatoms and radiolarians) show influence of both cold and temperature waters (local species mixed with upwelling ones). Diatom assemblages studied from the NP1-13 and NP1-15 dives bear a strong resemblance to assemblages from the Pisco Formation of southern Peru. Micropaleontological data from siliceous microfossils, provide evidence for two main unconformities, one is at the base of the Quaternary sequence and the other corresponds to a hiatus of 1 Myr, separating the Upper Miocene (7–8 Ma) sediments from uppermost Miocene (5–6 Ma) sediments. During the past 400 kyr, a wide rollover fold developed in the middle slope area associated with a major seaward dipping detachment fault. A catastrophic debris a valanche occurred as the results of an oversteepening of the landward flank of the rollover fold. The gravity failure of the slope, recognized by SeaBEAM and hydrosweep mapping, displaced enough material to produce a destructive tsunami which occurred 13.8 ± 2.7 kyr ago.

Pacific Ocean↗

Preliminary geologic map of the Big Bear City 7.5' Quadrangle, San Bernardino County, California

This data set maps and describes the geology of the Big Bear City 7.5' quadrangle, San Bernardino County, California. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a rock-unit coverage and attribute tables (polygon and arc) containing geologic contacts, units and rock-unit labels as annotation which are also included in a separate annotation coverage, bbc_anno (2) a point coverage containing structural point data and (3) a coverage containing fold axes. In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, a Correlation of Map Units (CMU) diagram, a Description of Map Units (DMU), an index map, a regional geologic and structure map, and an explanation for point and line symbols; (2) PDF files of the Readme (including the metadata file as an appendix), and a screen graphic of the plot produced by the PostScript plot file. The geologic map describes a geologically complex area on the north side of the San Bernardino Mountains. Bedrock units in the Big Bear City quadrangle are dominated by (1) large Cretaceous granitic bodies ranging in composition from monzogranite to gabbro, (2) metamorphosed sedimentary rocks ranging in age from late Paleozoic to late Proterozoic, and (3) Middle Proterozoic gneiss. These rocks are complexly deformed by normal, reverse, and thrust faults, and in places are tightly folded. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map data was compiled on base-stable cronoflex copies of the Big Bear City 7.5' topographic map, transferred to a scribe-guide and subsequently digitized. Lines, points, and polygons were edited at the USGS using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:24,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.

Open-File Report↗

Sources, dispersal, and fate of fine sediment supplied to coastal California

We have investigated the sources, dispersal, and fate of fine sediment supplied to California coastal waters in a partnership between the U.S. Geological Survey (USGS) and the California Sediment Management Workgroup (CSMW). The purpose of this study was to document the rates and characteristics of these processes so that the State can better manage its coastal resources, including sediment. In this study, we made the following observations: - Rivers dominate the supply of fine sediment to the California coastal waters, with an average annual flux of 34 megatonnes (Mt). - Cliff and bluff erosion in central and southern California is a source of fine sediment, with a delivery rate of approximately 10 percent of river loads. In the southern most part of the State, however, where river-sediment loads are low, cliff and bluff erosion represent approximately 40 percent of the total fine-sediment flux. - Temporal variation in the sources of fine sediment is high. River floods and bluff erosion are episodic and dominated by winter storms, which supply most sediment flux to the coast. The magnitude of winter storms is generally related to the El Niño-Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) climate cycles. - The three rivers that dominate fine-sediment flux to the California coast are the Eel, Salinas, and Santa Clara Rivers. Because the sediment delivery from these and all other California coastal watersheds is episodic, individual rivers discharge most of their annual loads over the course of only a few days per year. - Spatial variation in river-sediment discharge is high and generally related to such watershed characteristics as geology, precipitation, and drainage area. For example, the Transverse Range of southern California represents only 9 percent of the watershed-drainage area but 18 percent of the fine-sediment flux, a function of the young sedimentary bedrock and active tectonics of this region. The urban rivers of southern California were observed to discharge sediment at rates consistent with those of the surrounding Transverse Range rivers, which share the same geologic setting. - Direct observations of fine-sediment dispersal have been limited to the river-mouth settings of the Eel and Santa Clara Rivers, where sediment has been observed to settle quickly from buoyant plumes and be transported along the seabed during periods of storm waves. - After heavy loading of fine sediment onto the continental shelf during river floods, there is increasing evidence that fluid-mud gravity flows occur within a layer 10 to 50 cm above the seabed and efficiently transport fine sediment offshore. - All along the California coast, the timing of river discharge and coastal winds and waves from storm events are strongly coherent; however, of large wave events with the potential for resuspending and transporting fine sediment occur during periods without significant rainfall and therefore no significant river discharge. - Although fine sediment dominates the midshelf mud belts offshore of California river mouths, these mud belts are not the dominant sink of fine sediment, much of which is deposited across the entire continental shelf, including the inner shelf, and offshelf into deeper water depths. - Accumulation rates of fine sediment, which can exceed several millimeters per year, are generally highest near river sources of sediment and along the inner shelf and midshelf. - Sediment-accumulation rates, as summarized from both long-term and recent investigations of continental-shelf geochronology, are generally consistent across California except in southern California, where recently the sediment-accumulation rate has been tenfold greater than the long-term rate, possibly as a result of increased river discharge, wastewater outfall inputs, or other anthropogenic sources. Thus, fine sediment is a natural and dynamic element of the California coastal system because of large, natural sediment sources and dynamic transport processes.

California↗

Lead-isotopic, sulphur-isotopic, and trace-element studies of galena from the Silesian-Cracow Zn-Pb ores, polymetallic veins from the Gory Swietokrzyskie MTS, and the Myszkow porphyry copper deposit, Poland

Lead-isotopic data on galena samples collected from a paragenetically constrained suite of samples from the Silesian-Cracow ore district show no regional or paragenetically controlled lead-isotopic trends within the analytical reproducibility of the measurements. Furthermore, the new lead-isotopic data agree with previously reported lead-isotopic results (R. E. Zartman et al., 1979). Sulfur-isotopic analyses of ores from the Silesian-Cracow district as well as from vein ore from the Gory Swietokrzyskie Mts. and the Myszkow porphyry copper deposit, when coupled with trace-element data from the galena samples, clearly discriminate different hydrothermal ore-forming events. Lead-isotopic data from the Permian and Miocene evaporite deposits in Poland indicate that neither of these evaporite deposits were a source of metals for the Silesian-Cracow district ores. Furthermore, lead-isotopic data from these evaporite deposits and the shale residues from the Miocene halite samples indicate that the crustal evolution of lead in the central and western European platform in southern Poland followed normal crustal lead-isotopic growth, and that the isotopic composition of crustal lead had progressed beyond the lead-isotopic composition of lead in the Silesian-Cracow ores by Permian time. Thus, Mesozoic and Tertiary sedimentary flysch rocks can be eliminated as viable source rocks for the metals in the Silesian-Cracow Mississippi Valley-type (MVT) deposits. The uniformity of the isotopic composition of lead in the Silesian-Cracow ores, when coupled with the geologic evidence that mineralization must post-date Late Jurassic faulting (E. Gorecka, 1991), constrains the geochemical nature of the source region. The source of the metals is probably a well-mixed, multi-cycle molasse sequence of sedimentary rocks that contains little if any Precambrian metamorphic or granitic clasts (S. E. Church, R. B. Vaughn, 1992). If ore deposition was post Late Jurassic (about 150 m. y.) or later as indicated by the geologic evidence, the source rocks probably contained elevated concentrations of Zn and Pb (75-100 ppm), and relatively low concentrations of U and Th (2 and 8 ppm or less, respectively). The Carboniferous coal-bearing molasse rocks of the Upper Silesian Coal Basin are a prime candidate for such a source region. The presence of ammonia and acetate in the fluid inclusions (Viets et al., 1996a) also indicate that the Carboniferous coal-bearing molasse sequence in the Upper Silesian Coal Basin may have been a suitable pathway for the MVT ore fluids. The lead-isotopic homogeneity, when coupled with the sulfur-isotopic heterogeneity of the ores suggests that mixing of a single metal-bearing fluid with waters from separate aquifers containing variable sulfur-isotopic compositions in karsts in the Muschelkalk Formation of Middle Triassic age may have been responsible for the precipitation of the ores of the Silesian-Cracow district.

Prace - Panstwowego Instytutu Geologicznego↗