Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS2013

A comment on "Novel scavenger removal trials increase wind turbine-caused avian fatality estimates"

In a recent paper, Smallwood et al. (2010) conducted a study to compare their “novel” approach to conducting carcass removal trials with what they term the “conventional” approach and to evaluate the effects of the different methods on estimated avian fatality at a wind power facility in California. A quick glance at Table 3 that succinctly summarizes their results and provides estimated fatality rates and 80% confidence intervals calculated using the 2 methods reveals a surprising result. The confidence intervals of all of their estimates and most of the conventional estimates extend below 0. These results imply that wind turbines may have the capacity to create live birds. But a more likely interpretation is that a serious error occurred in the calculation of either the average fatality rate or its standard error or both. Further evaluation of their methods reveals that the scientific basis for concluding that “many estimates of scavenger removal rates prior to [their] study were likely biased low due to scavenger swamping” and “previously reported estimates of avian fatality rates … should be adjusted upwards” was not evident in their analysis and results. Their comparison to conventional approaches was not applicable, their statistical models were questionable, and the conclusions they drew were unsupported.

Journal of Wildlife Management↗
USGS2000

Preliminary study of gill NA+,K+-ATPase activity in juvenile spring chinook salmon following electroshock or handling stress

We compared gill Na+,K+-ATPase in subyearling and yearling spring chinook salmon Oncorhynchus tshawytscha 3 h, 24 h, and 7 d after exposure to either a short pulsed DC electroshock (300 V, 50 Hz, 8-ms pulse duration) or an acute handling stress. Mean gill Na+,K+-ATPase values ranged from 7.5 to 11.8 ??mol inorganic phosphate (Pi) ?? (mg protein)-1 ?? h-1. No significant differences were detected, with the exception of electroshocked subyearlings 7 d after treatment. Increased activity was attributed to the presence of two influential values. No significant differences were detected after removal of these observations, so the increase was not considered biologically significant. Inclusion of the outliers did not alter our interpretation of the results given that the observed increase was slight compared with the magnitude of changes reported under experimental conditions and in migrating juvenile salmonids. The treatment groups underwent a typical stress response and had significantly elevated cortisol and glucose levels 3 h after treatment. Recovery to control levels occurred within 24 h for cortisol and from 24 h to 7 d for glucose. Our results lead to the conclusion that neither acute electroshock nor acute handling stress alters Na+,K+-ATPase activity in juvenile spring chinook salmon.

North American Journal of Fisheries Management↗
USGS2007

Ambiguous taxa: Effects on the characterization and interpretation of invertebrate assemblages

Damaged and immature specimens often result in macroinvertebrate data that contain ambiguous parent-child pairs (i.e., abundances associated with multiple related levels of the taxonomic hierarchy such as Baetis pluto and the associated ambiguous parent Baetis sp.). The choice of method used to resolve ambiguous parent-child pairs may have a very large effect on the characterization of invertebrate assemblages and the interpretation of responses to environmental change because very large proportions of taxa richness (73-78%) and abundance (79-91%) can be associated with ambiguous parents. To address this issue, we examined 16 variations of 4 basic methods for resolving ambiguous taxa: RPKC (remove parent, keep child), MCWP (merge child with parent), RPMC (remove parent or merge child with parent depending on their abundances), and DPAC (distribute parents among children). The choice of method strongly affected assemblage structure, assemblage characteristics (e.g., metrics), and the ability to detect responses along environmental (urbanization) gradients. All methods except MCWP produced acceptable results when used consistently within a study. However, the assemblage characteristics (e.g., values of assemblage metrics) differed widely depending on the method used, and data should not be combined unless the methods used to resolve ambiguous taxa are well documented and are known to be comparable. The suitability of the methods was evaluated and compared on the basis of 13 criteria that considered conservation of taxa richness and abundance, consistency among samples, methods, and studies, and effects on the interpretation of the data. Methods RPMC and DPAC had the highest suitability scores regardless of whether ambiguous taxa were resolved for each sample separately or for a group of samples. Method MCWP gave consistently poor results. Methods MCWP and DPAC approximate the use of family-level identifications and operational taxonomic units (OTU), respectively. Our results suggest that restricting identifications to the family level is not a good method of resolving ambiguous taxa, whereas generating OTUs works well provided that documentation issues are addressed. ?? 2007 by The North American Benthological Society.

Journal of the North American Benthological Societ↗
USGS2025

Reevaluating the depositional model of the Cenomanian–Turonian Bridge Creek Limestone Member near Pueblo, Colorado, U.S.A.: Roles of changing sedimentation rate on the formation of limestone–marl bedding couplets

Although interbedded limestone–marl couplets in many hemipelagic and pelagic deposits have been commonly attributed to orbital-driven climate cycles, the driving mechanisms of these couplets remain largely controversial. This situation arises from the fact that detailed sedimentologic and petrographic facies characteristics of these fine-grained deposits have rarely been examined closely. In this study we conduct an integrated sedimentologic and petrographic analysis to disentangle causes of the limestone–marl bedding couplets in the Cenomanian–Turonian Bridge Creek Limestone Member (BCL) of the Greenhorn Formation using cores and outcrop near Pueblo, Colorado. By integrating existing geochemical datasets, each of the three general lithologies in the BCL including limestone, marl, and calcareous mudstone can be divided into two facies, a more bioturbated vs. a more laminated facies, in addition to bentonite beds. The variability in sedimentary, bioturbation, and petrographic characteristics of different sedimentary facies types, as well as constraints from the existing orbital time scale, in the BCL indicate changes in sediment accumulation rate or the amount of time recorded by different facies—the limestone, marl, and calcareous facies are interpreted to reflect increasing sedimentation rate. The sedimentary and petrographic facies variations, including but not limited to lithological alternations, in the BCL are interpreted to result from the combined influence of various processes such as bottom currents, bioturbation, early diagenesis, and episodic volcanic input, with some of the above-mentioned processes likely modulated by short-term relative changes in sea level. Results of this study highlight the need for detailed sedimentologic and petrographic studies and consideration of short-term changes in sedimentation rate to fully resolve the causes of the apparent limestone–marl bedding couplets and reliably reconstruct short-term changes in depositional and environmental conditions from the BCL and other similar successions.

Colorado↗
USGS2004

Stress orientations at intermediate angles to the San Andreas Fault, California

There are currently two competing models for the frictional strength of the San Andreas Fault in California: the strong-fault model and the weak-fault model. The strong-fault model predicts the maximum horizontal compressive stress axis to be at low angles to the fault, while the relatively weak fault model predicts it to be at high angles. Previous studies have disagreed as to which model is supported by observed stress orientations. We review and compare these studies and present results from several new focal mechanism stress inversions. We find that the observed stress orientations of different studies are generally consistent, implying that the disagreement is one of interpretation. The majority of studies find compressive stress orientations at intermediate angles to the fault, not strictly consistent with either current model. The strong-fault model is acceptable if the San Andreas is assumed to be a nonoptimally orientated fault that fails because optimally oriented, preexisting planes are not present. The relatively weak fault model is not consistent with the stress orientations. We propose two alternative models to better explain the observed intermediate stress orientations: an intermediate-strength San Andreas model and a model in which all major active faults are weak.

California↗
USGS2017

A systematic surveillance programme for infectious salmon anaemia virus supports its absence in the Pacific Northwest of the United States

In response to reported findings of infectious salmon anaemia virus (ISAV) in British Columbia (BC), Canada, in 2011, U.S. national, state and tribal fisheries managers and fish health specialists developed and implemented a collaborative ISAV surveillance plan for the Pacific Northwest region of the United States. Accordingly, over a 3-1/2-year period, 4,962 salmonids were sampled and successfully tested by real-time reverse-transcription PCR. The sample set included multiple tissues from free-ranging Pacific salmonids from coastal regions of Alaska and Washington and farmed Atlantic salmon ( Salmo salar L.) from Washington, all representing fish exposed to marine environments. The survey design targeted physiologically compromised or moribund animals more vulnerable to infection as well as species considered susceptible to ISAV. Samples were handled with a documented chain of custody and testing protocols, and criteria for interpretation of test results were defined in advance. All 4,962 completed tests were negative for ISAV RNA. Results of this surveillance effort provide sound evidence to support the absence of ISAV in represented populations of free-ranging and marine-farmed salmonids on the northwest coast of the United States.

Pacific Northwest↗
USGS1994

Emission rates of sulfur dioxide and carbon dioxide from Redoubt Volcano, Alaska during the 1989-1990 eruptions

Airborne measurements of sulfur dioxide emission rates in the gas plume emitted from fumaroles in the summit crater of Redoubt Volcano were started on March 20, 1990 using the COSPEC method. During the latter half of the period of intermittent dome growth and destruction, between March 20 and mid-June 1990, sulfur dioxide emission rates ranged from approximately 1250 to 5850 t/d, rates notably higher than for other convergent-plate boundary volcanoes during periods of active dome growth. Emission rates following the end of dome growth from late June 1990 through May 1991 decreased steadily to less than 75 t/d. The largest mass of sulfur dioxide was released during the period of explosive vent clearing when explosive degassing on December 14-15 injected at least 175,000 ?? 50,000 tonnes of SO2 into the atmosphere. Following the explosive eruptions of December 1989, Redoubt Volcano entered a period of intermittent dome growth from late December 1989 to mid-June 1990 during which Redoubt emitted a total mass of SO2 ranging from 572,000 ?? 90,000 tonnes to 680,000 ?? 90,000 tonnes. From mid-June 1990 through May 1991, the volcano was in a state of posteruption degassing into the troposphere, producing approximately 183,000 ?? 50,000 tonnes of SO2. We estimate that Redoubt Volcano released a minimum mass of sulfur dioxide of approximately 930,000 tonnes. While COSPEC data were not obtained frequently enough to enable their use in eruption prediction, SO2 emission rates clearly indicated a consistent decline in emission rates between March through October 1990 and a continued low level of emission rates through the first half of 1991. Values from consecutive daily measurements of sulfur dioxide emission rates spanning the March 23, 1990 eruption decreased in the three days prior to eruption. That decrease was coincident with a several-fold increase in the frequency of shallow seismic events, suggesting partial sealing of the magma conduit to gas loss that resulted in pressurization of the shallow magma system and an increase in earthquake activity. Unlike the short-term SO2 decrease in March 1990, the long-term decrease of sulfur dioxide emission rates from March 1990 through May 1991 was coincident with low rates of seismic energy release and was interpreted to reflect gradual depressurization of the shallow magma reservoir. The long-term declines in seismic energy release and in SO2 emission rates led AVO scientists to conclude on April 19, 1991 that the potential for further eruptive activity from Redoubt Volcano had diminished, and on this basis, the level of concern color code for the volcano was changed from code yellow (Volcano is restless; earthquake activity is elevated; activity may include extrusion of lava) to code green (Volcano is in its normal 'dormant' state). ?? 1994.

Journal of Volcanology and Geothermal Research↗
USGS1985

A nomogram for interpreting slope stability of fine-grained deposits in modern and ancient-marine environments.

Design of the nomogram is based on effective stress and combines consolidation theory as applicable to depositional environments with the infinite-slope model of slope-stability analysis. The link between the two combined theories is a term representing the effective overburden stress, which may be predicted from consolidation theory and a knowledge of sedimentation rate, time, and the coefficient of consolidation. In turn, if infinite-slope conditions are assumed to exist, the effective overburden stress can be used to derive a factor of safety against static slope failure by using the angle of internal friction and the slope angle. The nomogram applies to depostitional settings in which fine-grained sediment has accumulated at a relatively constant rate upon a base that is essentially impermeable. The model further assumes that the lateral extent of sediment affected by any mass movement will be great compared to its thickness and that no outside agents (e.g., cements, gas) are influencing the section. The nomogram is applicable to static conditions (inherent stability of the slope) and certain dynamic conditions (such as earthquakes). It may be used to investigate mass movements in the geologic past as well as those in modern environments.--Modified journal abstract.

Journal of Sedimentary Petrology↗
USGS2012

Evolution of deep structure along the trans-Alaska crustal transect, Chugach Mountains and Copper River Basin, southern Alaska

One of the most important results of the Trans-Alaska Crustal Transect investigations is the discovery that more than one third of the North American plate in southern Alaska (Chugach Mountains and Copper River basin) consists of tectonically underplated oceanic lithosphere. In southern Alaska, exposed accreted tectonostratigraphic terranes, include, from south to north along the transect, the Prince William, Chugach, Peninsular, and Wrangellia terranes. Chief results from seismic refraction data include the following: (1) A sequence of layers of low and high velocity (5.7–7.8 km/s), more than 10 km thick, dips gently northward, with its top at the surface in the southernmost Chugach terrane and at more than 20-km depth beneath the southern Peninsular terrane. A high-velocity layer at the top of this sequence corresponds to metabasalt in the southernmost Chugach terrane. This sequence is interpreted to be tectonically underplated fragments of the Kula plate and its sedimentary overburden. (2) An intermediate-velocity layer (6.35–6.5 km/s) at 9-km depth beneath both the northern Chugach and southern Peninsular terranes appears to extend without offset across the deep projection of the suture between these two terranes, the Border Ranges fault system. (3) A crustal “root” between depths of 19 and 57 km beneath the northern Peninsular and Wrangellia terranes appears to extend without offset across the deep projection of the suture between these two terranes, the West Fork fault system. This crustal root also appears to abut the tectonically underplated sequence to the south. Unfortunately, in results 2 and 3 the apparent crosscutting and abutting relationships can not be unambiguously resolved. Three scenarios, A, B, and C, have been offered to explain the evolution of this structure. Scenarios A and B differ in interpretation of the depth extent of the northern Chugach and southern Peninsular terranes. In scenario A these terranes extend to only 9-km depth, where they rest on an unknown middle crust, interpreted as a deeper part of the Peninsular terrane. In this scenario, the northern Chugach and southern Peninsular terrenes moved landward as a tectonic wedge, during tectonic underplating in the latest Cretaceous or early Tertiary, and uplifted the upper crust of the Peninsular terrane to the north. In scenario B, the northern Chugach and southern Peninsular terranes extend to 20-km depth. In this scenario, they were compressed but not detached and displaced during accretion. Scenarios A, B, and C differ in interpretation of the deep crustal root that appears to abut the tectonically underplated sequence. Since the Peninsular and Wrangellia terranes were at or below sea level prior to the mid-Cretaceous, the root was probably emplaced in mid-Cretaceous or younger times. In scenario A the root is lower crust of North America that moved southward during tectonic underplating of the Kula plate. In scenario B the root is, in part, tectonically underplated rocks similar to the Kula plate sequence to the south. In scenario C the root is, in part, magmatically underplated rocks.

Journal of Geophysical Research↗
USGS2000

Diagenesis of the Purington Shale in the Illinois Basin and implications for the diagenetic state of sedimentary rocks of shallow Paleozoic basins

The clay minerals, micas, and feldspars of the Pennsylvanian-age Purington Shale have been more diagenetically active than generally recognized. They have undergone diagenetic changes comparable to those of Cenozoic and Mesozoic sedimentary rocks buried three to four times as deeply and heated to approximately twice the temperature. The Purington Shale on the Western Shelf of the Illinois Basin has experienced maximum burial of ???1.0 km and was never heated to more than 60??C, except for a very brief time at about 80??C. The illite/smectite (I/S) of the Purington Shale has ???90% illite. The chemical compositions of the feldspar assemblage in the 0.09-0.063-mm fraction differ from most modern detrital suites of feldspars but are similar to diagenetic sequences described by others from much greater burial depths and are extensively, but not completely, albitized. The simplest interpretation of the apparently advanced stage of diagenesis is that the diagenetic processes have been operating at less pressure and lower temperature but for a longer time; an example of low-temperature, time-dependent diagenesis. By similar reasoning, the apparently anomalously advanced maturity of all of the sedimentary rocks in the relatively shallow Illinois Basin is explained. This generalization should be considered for all shallow Paleozoic basins and should influence (1) exploration for petroleum, (2) use of modal and chemical analyses for determining provenance, and (3) use of chemical composition of shales as proxy for crustal evolution.

Journal of Geology↗
USGS1977

Radiate shell structures in Paleozoic Myodocopid and Palaeocopid ostracodes are epigenetic

The radiate structures in the shell of Paleozoic ostracodes are interpreted to be epigenetic in origin. On the basis of this interpretation, the genus Radiicypridina Bless, 1973, is a junior synonym of Eocypridina Kesling and Ploch, 1960. The type-series of Eocypridina radiata (Jones, Kirkby, and Brady, 1874), from the Coal Measures of Scotland, is illustrated, and a lectotype is designated. Eocypridina aciculata , (Scott and Summerson, 1943) is a valid species, but the more elongated specimens they identified as Cypridina radiata Jones, Kirkby, and Brady, 1874, from the same collection, belong in E. aciculata . The variation in lateral outline of specimens in the Hance Formation of Kentucky is due to the orientation of the valves in the rock.

Journal of Research of the U.S. Geological Survey↗
USGS2017

Surface morphology of caldera-forming eruption deposits revealed by lidar mapping of Crater Lake National Park, Oregon- Implications for emplacement and surface modification

Large explosive eruptions of silicic magma can produce widespread pumice fall, extensive ignimbrite sheets, and collapse calderas. The surfaces of voluminous ignimbrites are rarely preserved or documented because most terrestrial examples are heavily vegetated, or severely modified by post-depositional processes. Much research addresses the internal sedimentary characteristics, flow processes, and depositional mechanisms of ignimbrites, however, surface features of ignimbrites are less well documented and understood, except for comparatively small-volume deposits of historical eruptions. The ~7,700 calendar year B.P. climactic eruption of Mount Mazama, USA vented ~50 km3 of magma, deposited first as rhyodacite pumice fall and then as a zoned rhyodacite-to-andesite ignimbrite as Crater Lake caldera collapsed. Lidar collected during summer 2010 reveals the remarkably well-preserved surface of the Mazama ignimbrite and related deposits surrounding Crater Lake caldera in unprecedented detail despite forest cover. The ±1 m lateral and ±4 cm vertical resolution lidar allows surface morphologies to be classified. Surface morphologies are created by internal depositional processes and can point to the processes at work when pyroclastic flows come to rest. We describe nine surface features including furrow-ridge sets and wedge-shaped mounds in pumice fall eroded by high-energy pyroclastic surges, flow- parallel ridges that record the passage of multiple pyroclastic flows, perched benches of marginal deposits stranded by more-mobile pyroclastic-flow cores, hummocks of dense clasts interpreted as lag deposit, transverse ridges that mark the compression and imbrication of flows as they came to rest, scarps indicating ignimbrite remobilization, fields of pit craters caused by phreatic explosions, fractures and cracks caused by extensional processes resulting from ignimbrite volume loss, and stream channels eroded in the newly formed surface. The nine morphologies presented here illustrate a dynamic depositional environment that varied spatially and with time during the eruption, and show that multiple processes modified the ignimbrite after deposition, both during and after the eruption.

Oregon↗
USGS1997

Complexities of plinian fall deposition at vent: An example from the 1912 Novarupta eruption (Alaska)

An extremely proximal ejecta ring, with exposures to within 100 m of vent, was deposited during later-stage plinian fall activity during the 1912 Novarupta eruption in Alaska. One bed in the ejecta ring (bed S) contains predominantly andesitic clasts which serve to delineate the striking contrast in thinning rates along dispersal axis of the ejecta ring [Pyle bt values of 70 m (bed S alone) or 190 m (whole ejecta ring)] and the coeval dacitic plinian fall deposits [Pyle bt, values of 4 km (proximal) and 37 km (medial-distal)]. The locally deposited andesitic and dacitic clasts of the ejecta ring are interpreted as products of an irregular 'collar' of low-fountaining ejecta partially sheathing the core of higher-velocity dacitic ejecta that fed the stable, convecting 23-km-high column. The presence of such an extremely proximal accumulation of ejecta appears to be a feature common to several other historic eruptions that generated widespread fall deposits. This feature in part accounts for conflicts between measured and calculated values for thickness maxima in plinian fall deposits and suggests that modifications may be required of existing models for plinian eruption columns.

Journal of Volcanology and Geothermal Research↗
USGS2015

Mars Reconnaissance Orbiter and Opportunity observations of the Burns formation: crater hopping at Meridiani Planum

Compact Reconnaissance Imaging Spectrometer for Mars hyperspectral (1.0–2.65 µm) along-track oversampled observations covering Victoria, Santa Maria, Endeavour, and Ada craters were processed to 6 m/pixel and used in combination with Opportunity observations to detect and map hydrated Mg and Ca sulfate minerals in the Burns formation. The strongest spectral absorption features were found to be associated with outcrops that are relatively young and fresh (Ada) or preferentially scoured of dust, soil, and coatings by prevailing winds. At Victoria and Santa Maria, the scoured areas are on the southeastern rims and walls, opposite to the sides where wind-blown sands extend out of the craters. At Endeavour, the deepest absorptions are in Botany Bay, a subdued and buried rim segment that exhibits high thermal inertias, extensive outcrops, and is interpreted to be a region of enhanced wind scour extending up and out of the crater. Ada, Victoria, and Santa Maria outcrops expose the upper portion of the preserved Burns formation and show spectral evidence for the presence of kieserite. In contrast, gypsum is pervasive spectrally in the Botany Bay exposures. Gypsum, a relatively insoluble evaporative mineral, is interpreted to have formed close to the contact with the Noachian crust as rising groundwaters brought brines close to and onto the surface, either as a direct precipitate or during later diagenesis. The presence of kieserite at the top of the section is hypothesized to reflect precipitation from evaporatively concentrated brines or dehydration of polyhydrated sulfates.

Journal of Geophysical Research E: Planets↗
USGS2019

Eruption and fountaining dynamics of selected 1985–1986 high fountaining episodes at Kīlauea volcano, Hawai'i, from quantitative vesicle microtexture analysis

Tephra from the early Hawaiian fountaining episodes of the ongoing eruption of Pu'u 'Ō'ō in the East Rift Zone (ERZ) of Kīlauea provides an opportunity to study the vesicle microtextures of pyroclasts erupted from a single vent over a prolonged period of time. We report the results of microtextural analysis of pyroclasts from five of Pu'u 'Ō'ō's high (>200 m) Hawaiian fountaining episodes (episodes 32, 37, 40, 44 and 45) erupted during 1985–1986. This analysis was carried out to constrain the parameters that led to large variations in fountain height at Pu'u 'Ō'o, and the extent to which pyroclast residence times in the fountain modified microtextures. Our results confirm the finding of Stovall et al., 2011 , Stovall et al., 2012 that pyroclasts from a single Hawaiian fountain can vary greatly in texture (from bubbly to foamy), and have vesicle volume densities (N m v ) and vesicle to melt ratios (V G /V L ) that vary by an order of magnitude. This range in vesicle texture and population is due to extensive growth and coalescence of vesicles within the fountain after fragmentation. Only one pyroclast from four of five episodes was found to have textures interpreted as indicative of the vesicle population near the moment of fragmentation: bubbly texture, high density (typically >500 kg m −3 ), high N m v (2.2 × 10 6 to 4.4 × 10 6 ), and low V G /V L of 2.06 to 4.65. We demonstrate a linear correlation between Δ(V G /V L ) and peak fountain height across a range of Hawaiian fountains from Kilauea. This correlation could be used to infer peak heights of unobserved Hawaiian fountaining eruptions after further testing using well-recorded events.

Hawai'i↗
USGS1979

Inventory and mapping of flood inundation using interactive digital image analysis techniques

LANDSAT digital data and color infra-red photographs were used in a multiphase sampling scheme to estimate the area of agricultural land affected by a flood. The LANDSAT data were classified with a maximum likelihood algorithm. Stratification of the LANDSAT data, prior to classification, greatly reduced misclassification errors. The classification results were used to prepare a map overlay showing the areal extent of flooding. These data also provided statistics required to estimate sample size in a two phase sampling scheme, and provided quick, accurate estimates of areas flooded for the first phase. The measurements made in the second phase, based on ground data and photo-interpretation, were used with two phase sampling statistics to estimate the area of agricultural land affected by flooding These results show that LANDSAT digital data can be used to prepare map overlays showing the extent of flooding on agricultural land and, with two phase sampling procedures, can provide acreage estimates with sampling errors of about 5 percent. This procedure provides a technique for rapidly assessing the areal extent of flood conditions on agricultural land and would provide a basis for designing a sampling framework to estimate the impact of flooding on crop production.

Canadian Journal of Remote Sensing↗
USGS2014

A new look at the Lake Superior biomass size spectrum

We synthesized data from multiple sampling programs and years to describe the Lake Superior pelagic biomass size structure. Data consisted of Coulter counts for phytoplankton, optical plankton counts for zooplankton, and acoustic surveys for pelagic prey fish. The size spectrum was stable across two time periods separated by 5 years. The primary scaling or overall slope of the normalized biomass size spectra for the combined years was −1.113, consistent with a previous estimate for Lake Superior (−1.10). Periodic dome structures within the overall biomass size structure were fit to polynomial regressions based on the observed sub-domes within the classical taxonomic positions (algae, zooplankton, and fish). This interpretation of periodic dome delineation was aligned more closely with predator–prey size relationships that exist within the zooplankton (herbivorous, predacious) and fish (planktivorous, piscivorous) taxonomic positions. Domes were spaced approximately every 3.78 log10 units along the axis and with a decreasing peak magnitude of −4.1 log 10 units. The relative position of the algal and herbivorous zooplankton domes predicted well the subsequent biomass domes for larger predatory zooplankton and planktivorous prey fish.

Lake Superior↗
USGS1979

The flow mechanism in the Chalk based on radio-isotope analyses of groundwater in the London Basin

14 C analyses of groundwaters from the Chalk of the London Basin are re-interpreted and the age of the groundwater is revised. Radio-isotope analyses are used to examine the flow mechanism in the aquifer. The evidence supports the view that a network of micro-fissures and larger intergranular pores in the matrix provides a significant part of the water pumped from Chalk wells and the major fissures distribute the water to the wells. Most of the matrix is fine-grained and contains a very old water. This diffuses into the micro-fissures and larger pores and is carried to the wells by the major fissures.

southeast England↗