Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Enviornmental Monitoring and Assessment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 32Linked to original sources
USGS2026

Regional characterization of coal resources in the Gulf Coast Coal Region—In support of coal as a potential source for critical minerals and rare earth elements

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The Gulf Coast and the Fort Union regions are the two major lignite-bearing regions within the United States. Recent REE and CM studies of the lignite in these regions have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of Gulf Coast Coal Region lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from drill holes and measured mine and outcrop sections for a total of 31,181 data points. The estimated total remaining coal resource in the Gulf Coast Coal Region is about 83 billion metric tons in the upper 90 meters (approximately 300 feet) of the subsurface. The current estimate of remaining coal resources includes approximately 1.88 billion metric tons of coal that have been extracted in the region since 1983. Texas accounted for 39 percent (32 billion metric tons) of the remaining total resource, followed by Mississippi (24 percent, 20 billion metric tons ), Louisiana (14 percent, 12 billion metric tons), Tennessee (10 percent, 8.5 billion metric tons), and Arkansas (6 percent, 5.1 billion metric tons). Alabama, Georgia, Kentucky, and Missouri each accounted for less than 5 percent of the total resource; Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known statewide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast Coal Region and Fort Union Coal Region resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses.

Alabama, Arkansas, Florida, Georgia, Illinois, Lou↗
USGS2023

Connecting flood-related fluvial erosion and deposition with vulnerable downstream road-stream crossings

Fluvial erosion is increasingly responsible for infrastructure and building damages associated with floods as the intensity of extreme rainfalls hit rural and urban rivers in a variety of climate settings across the United States. Extreme floods in 2016 and 2018 caused widespread culvert blockages and road failures, including extensive damage along steep tributaries and ravines in the Marengo River, Wisconsin, watershed during 2016 and 2018. A study conducted by the U.S. Geological Survey (USGS), Wisconsin Wetlands Association (WWA), Ashland County, and the Northwest Wisconsin Regional Planning Commission (NWRPC) investigated the special concern of fluvial erosion hazards (FEHs) associated with gullying, streamside landslides, and the loss of wetland storage in headwaters. In 2019, a pilot study was begun to map and classify ephemeral and perennial streams and wetlands in terms of their sensitivity to FEHs. This study combined data from field-based rapid geomorphic assessments (RGAs) coupled with a stream network-wide geographic information system (GIS) approach for mapping stream segments, referred to as fluvial process zones (FPZ), sensitive to erosion, deposition, and channel change. The GIS approach used nationally available 10-meter (m) resolution topology and an extended stream network to map FPZs based on Strahler stream order, stream power, channel slope, presence of adjacent steep valley sides and headwater flats, and adjacent landform setting. Bankfull channel widths derived from RGA-based hydraulic geometry curves combined with drainage areas, an estimate of bankfull flow, and channel slope were used to calculate specific stream power for the FPZs. Lastly, the FPZs were characterized by their location within three major landform settings that affect erosion potential. The resulting vulnerability maps provided a screening framework to identify FPZs that are sensitive to incision, gullying and mass wasting along steep headwater ephemeral channels, as well as downstream perennial channels that have the potential for valley-side landslides, coarse sediment deposition, and channel change. Lastly, each FPZ was characterized in terms of hydrologic alteration associated with ditching. The vulnerability mapping products and rankings of sensitivity of FPZs will ultimately be used by Ashland County and their collaborators to prioritize natural flood management projects that mitigate FEHs, restore hydrology, and reconnect channels with adjacent wetlands and floodplains.

Wisconsin↗
USGS1986

Water-quality appraisal of NASQAN stations below impoundments, eastern Tennessee

The National Stream Quality Accounting Network (NASQAN) is a network of stations at which systematic and continuing water-quality data are collected. Major objectives of this U.S. Geological Survey program are (1) to depict areal variability of streamflow and water-quality conditions nationwide on a year-by-year basis and (2) to detect long-term changes in streamflow and stream quality. Several NASQAN stations in East Tennessee are downstream from impoundments which have a significant effect on water quality. NASQAN data obtained from the Tennessee River below Watts Bar Dam and the Clinch River below Melton Hill Dam were compared to water-quality data from the basins upstream. The comparison indicates that NASQAN data obtained below impoundment may not be adequate to describe a composite picture of water quality in the accounting unit. Detention time of storage in the impoundments is believed to moderate the range of constituent values observed at the NASQAN stations. Data obtained upstream and downstream from Watts Bar Dam indicate that the water sampled at the NASQAN station comes from stratified layers of the impoundment and is not representative of an integrated sample of water from the impoundment. Values of total recoverable iron suggest that, because of adsorption to sediments in impoundments, some constituents are not accurately described by sampling below impoundments. Relations between water-quality constituents and flow at stations on the Clinch River and Tennessee River are not well defined due to regulation. Direct load computations for many constituents were therefore not possible, which diminished the utility of data from these NASQAN stations to account for quantity versus quality of the water. Load computations were only possible for ionic constituents through use of a continuous specific-conductance record as an intermediary. Compensation for the effects of discharge prior to application of the Seasonal Kendall test for trends could not be done and identification of trends in water-quality constituents caused by some process (source) change was not possible. Some water-quality trends indicated by data from the Clinch and Tennessee Rivers might reflect the decreasing trend in discharge during the 1972-82 water years. Thus the stations below Watts Bar Dam and below Melton Hill Dam do not adequately meet the NASQAN objective to detect and assess long-term changes in stream quality.

Tennessee↗
USGS2024

Estimating groundwater level records using MOVE.1 and computing monthly percentiles from estimated groundwater records in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed record extensions on groundwater levels at select wells using the Maintenance of Variance Extension type 1 (MOVE.1) method. The groundwater levels estimated from these record extensions were used to compute monthly percentiles to improve future determinations of a groundwater index. In Massachusetts, 27 of 29 short-record study wells with continuous groundwater levels between 0.8 and 8.1 years were suitable for record extensions; 37 long-record index wells were used to extend the groundwater level records at the study wells. The index well selected to pair with a study well was chosen based on Pearson correlation coefficient values; cross-correlation between the two wells; geologic and topographic similarity; and smallest distance spanning the wells. Each study well and its corresponding index well have 1 or more years of concurrent, overlapping data; a Pearson correlation coefficient that exceeded a threshold value of 0.8; and a similar aquifer type and hydrologic characteristics. Of the 29 study wells, 2 showed poor correlations with all index wells and were not considered for record extensions. Performance metrics used to assess the accuracy of the MOVE.1 models indicated that most models provided reasonable estimates of groundwater levels. Root mean square error values ranged from 0.097 to 2.292 feet, with a median of 0.536 foot. Nash-Sutcliffe efficiency coefficient values ranged from 0.623 to 0.996, with a median value of 0.759. Generally, study wells in close geographical proximity to their index well resulted in stronger model performance. The average length of groundwater level records was extended by 14.1 years to a new average of 18.1 years. The estimated groundwater level records from the MOVE.1 models resulted in an increase in the range of highest and lowest groundwater levels at 23 of 27 wells. The increase in range of groundwater levels was between 0.08 to 7.95 feet. Monthly percentiles for State drought indices were computed from the estimated MOVE.1 records and observed records through December 31, 2021. Percentiles computed from estimated records show an average groundwater level about 1.0 foot lower than observed data at the 2d percentile and 0.1 foot lower at the 30th percentile.

Massachusetts↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2025

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States↗
USGS2026

The value of electronic tagging and tracking studies for understanding fish–hypoxia interactions

Objective Hypoxia (i.e., low dissolved oxygen availability) is a natural phenomenon but can also be induced by human activities (e.g., nutrient enrichment from runoff). Given that dissolved oxygen is essential for aquatic life, periods of hypoxia tend to have negative consequences (e.g., sublethal disturbances, mortality) for most fishes. Extensive laboratory research has documented hypoxia thresholds and physiological and behavioral outcomes for a variety of freshwater and marine fishes and there is also an extensive body of fieldwork assessing population-level responses (e.g., survival, distribution). Yet, studying how individual fish respond to hypoxia in the wild has proved challenging; electronic tagging and tracking tools (e.g., biotelemetry, biologging) have made it easier to study individual responses to hypoxia and complement other tools like hydroacoustics that tend to focus on population-level responses. Methods We review what has been learned from contemporary studies that employ electronic tagging and tracking tools to understand how fish respond to hypoxia in the wild. Topics explored include identifying and validating hypoxia thresholds, habitat compression, connectivity, mortality, physiological and bioenergetic consequences, and extreme weather conditions. We also consider what we have learned about evaluating various management plans for hypoxia and reflect on how electronic tags have also been used in aquaculture systems and in hybrid studies that combine laboratory and field research. We highlight fishes in Lake Erie as a research narrative to demonstrate how electronic tagging and tracking have markedly improved our understanding of a longstanding hypoxia issue. Results Our synthesis revealed that electronic tagging and tracking have provided critical information on how fish respond to hypoxia in the field, revealing complex trade-offs and compensatory mechanisms as well as cryptic hypoxia-induced mortality. Beyond just illuminating space use and mortality, tags equipped with various sensors are revealing how fish deal with hypoxia in real time in terms of physiology, bioenergetics, and behavior. Conclusions As electronic tagging and tracking methods experience further innovation and are increasingly applied to understand the effects of hypoxia on fish, we expect more unanticipated findings about the effects of hypoxia on fish in all aquatic ecosystems, which will strengthen our ability to manage and mitigate hypoxia. Combining tools and approaches (e.g., lab and field) is perhaps the best way to generate comprehensive understanding.

Transactions of the American Fisheries Society↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗
USGS1997

Hydrologic and water-quality conditions in the Horse Creek basin, west-central Florida, October 1992-February 1995

A baseline study of the 241-square-mile Horse Creek basin was undertaken from October 1992 to February 1995 to assess the hydrologic and water-quality conditions of one of the last remaining undeveloped basins in west-central Florida. During the period of the study, much of the basin remained in a natural state, except for limited areas of cattle and citrus production and phosphate mining. Rainfall in 1993 and 1994 in the Horse Creek basin was 8 and 31 percent, respectively, above the 30-year long-term average. The lowest and highest maximum instantaneous peak discharge of the six daily discharge stations occurred at the Buzzard Roost Branch and the Horse Creek near Arcadia stations with 185 to 4,180 cubic feet per second, respectively. The Horse Creek near Arcadia station had the lowest number of no-flow days with zero days and the Brushy Creek station had the highest number with 113 days. During the study, the West Fork Horse Creek subbasin had the highest daily mean discharge per square mile with 30.6 cubic feet per second per square mile, and the largest runoff coefficient of 43.7 percent. The Buzzard Roost Branch subbasin had the lowest daily mean discharge per square mile with 5.05 cubic feet per second per square mile, and Brushy Creek and Brandy Branch shared the lowest runoff coefficient of 0.6 percent. Brandy Branch had the highest monthly mean runoff in both 1993 and 1994 with 11.48 and 19.28 inches, respectively. During the high-baseflow seepage run, seepage gains were 8.87 cubic feet per second along the 43-mile Horse Creek channel. However, during the low-baseflow seepage run, seepage losses were 0.88 cubic foot per second. Three methods were used to estimate average annual ground-water recharge in the Horse Creek basin: (1) well hydrograph, (2) chloride mass balance, and (3) streamflow hydrograph. Estimated average annual recharge using these three methods ranged from 3.6 to 8.7 inches. The high percentage of carbonate plus bicarbonate analyzed at the Carlton surficial aquifer well could indicate an upward ground-water flow from the underlying intermediate aquifer system. Based on constituent concentrations in water samples from the six daily discharge stations, concentrations generally are lower in the upper three subbasins, West Fork Horse Creek, Upper Horse Creek, and Brushy Creek than in the lower three subbasins. Typically, concentrations were highest for major ions at Buzzard Roost Branch and nutrients at Brushy Creek.

Florida↗
USGS2024

Estimated groundwater recharge for mid-century and end-of-century climate projections, Kaua‘i, O‘ahu, Moloka‘i, Lāna‘i, Maui, and the Island of Hawai‘i

Demand for freshwater in the State of Hawaiʻi is expected to increase by roughly 13 percent from 2020 to 2035. Groundwater availability in Hawaiʻi is affected by a number of factors, including land cover, rainfall, runoff, evapotranspiration, and climate change. To evaluate the availability of fresh groundwater under projected future-climate conditions, estimates of groundwater recharge are needed. A water-budget model with a daily computation interval was used to estimate the spatial distribution of groundwater recharge for Kauaʻi, Oʻahu, Molokaʻi, Lānaʻi, Maui, and the Island of Hawaiʻi for recent climate conditions and three future-climate scenarios. Climate conditions from 1978 to 2007 were used as the reference period for recent climate conditions on each island. The three future-climate scenarios were developed using available high-resolution downscaled climate projections that include (1) a mid-century scenario using projected rainfall conditions for the Representative Concentration Pathway (RCP) scenario during 2041–71 with a total radiative forcing of 8.5 watts per square meter by the year 2100 (RCP8.5 2041–71 scenario), (2) a dry-climate scenario using projected rainfall conditions for the RCP8.5 scenario during 2071–99, and (3) a wet-climate scenario using projected rainfall conditions for the “Special Report on Emissions Scenarios” A1B scenario during 2080–99 for Maui, the RCP4.5 scenario during 2080–99 for Kauaʻi, Lānaʻi, and the Island of Hawaiʻi, and the RCP8.5 scenario during 2080–99 for Oʻahu and Molokaʻi. An additional drought scenario was added for Lānaʻi to assess the effect of extreme drought conditions during 2008–12 on groundwater recharge. All scenarios used 2020 land cover. Mean annual groundwater recharge is estimated to decrease between 5 and 55 percent on all six islands in this study for the mid-century and dry-climate scenarios relative to the reference-period recharge. Recharge is estimated to increase for Kauaʻi, Oʻahu, Molokaʻi, Lānaʻi, and Maui between 2 and 43 percent and decrease for the Island of Hawaiʻi by about 4 percent for the wet-climate scenario. Comparing the mid-century and dry-climate scenarios, all 110 aquifer systems (management areas defined by the State of Hawaiʻi Commission on Water Resource Management) from all six islands show similar direction in drying (104 aquifer systems) or wetting (6 aquifer systems) changes for recharge. However, among the three future scenarios, only 35 of 110 aquifer systems show similar direction in drying (30 aquifer systems) or wetting (5 aquifer systems) changes for recharge.

Hawaii↗
USGS2026

Unraveling protracted modification of Archean and Paleoproterozoic crust in central Laurentia, Penokean orogen, with garnet and accessory mineral geochronology and microstructural analysis

Proterozoic metamorphism and deformation of the southern margin of the Superior craton in the Lake Superior region is attributed to the Penokean orogeny (1890−1830 Ma). This model includes a period of crustal inversion in which Archean basement blocks were exhumed through overlying Paleoproterozoic strata, producing the corridor of gneiss domes that parallels the trend of the Penokean orogen across the northern Midcontinent, USA. However, recent geologic mapping and 40 Ar/ 39 Ar geochronology challenge this interpretation, suggesting instead that the gneiss dome structures reflect younger episodes of tectonic activity along the southern margin of Laurentia. In absence of integrated pressure-temperature-time-deformation constraints for these rocks, interpretations are largely limited to their final cooling history, making it difficult to both identify the tectonic forces that shaped the architecture of the Penokean orogenic belt and assess the extent to which later Proterozoic tectonism modified the southern Superior craton. We address this problem with an approach joining thermodynamic modeling, garnet and accessory mineral geochronology, and microstructural analysis for several metamorphic rocks across the gneiss dome corridor. The U-Pb ages of titanite reveal that the Proterozoic geometries of exhumed basement gneiss domes are governed by preexisting Archean structures. Garnet Lu-Hf geochronology constrains the timing of prograde-to-peak metamorphism in the Penokean orogenic belt. Granulite facies metamorphism is related to the final stages of the Penokean orogeny at 1837 Ma and localized in a belt of high-grade rocks near a major Penokean suture. Garnet Lu-Hf ages of samples adjacent to gneiss domes reflect regional metamorphism following the accretionary phase of the Penokean orogeny, between 1825 Ma and 1782 Ma, which we suggest reflects continued crustal thickening related to convergence farther south during this time interval. Combination of garnet microstructures and Sm-Nd ages reflects later exhumation of gneiss domes and buried metasedimentary rocks by ca. 1750 Ma, consistent with previously published 40 Ar/ 39 Ar cooling ages across the region. Reset Lu-Hf and Sm-Nd garnet ages and U-Pb ages of syn-kinematic titanite reflect reactivation of primary Penokean structures during this period of basement uplift. These data document significant modification of the Penokean orogen and the Archean crust of the southern Superior province between 1800 Ma and 1700 Ma. Tectonic activity during this interval coincides with collisional events recognized in western Laurentia, suggesting that the period immediately following the Penokean orogeny may be a broadly important time for crustal growth and modification in proto-North America.

Michigan, Wisconsin↗
USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗
USGS1999

Water quality of Rob Roy Reservoir and Lake Owen, Albany County, and Granite Springs and Crystal Lake Reservoirs, Laramie County, Wyoming, 1997-98

The water quality of four reservoirs was assessed during 1997 and 1998 as a cooperative project between the Cheyenne Board of Public Utilities and the U. S. Geological Survey. The four reservoirs, Rob Roy, Lake Owen, Granite Springs, and Crystal Lake, provide approximately 75 percent of the public water supply for Cheyenne, Wyoming. Samples of water and bottom sediment were collected and analyzed for selected physical, chemical, and biological characteristics to provide data about the reservoirs. Water flows between the reservoirs through a series of pipelines and stream channels. The reservoirs differ in physical characteristics such as elevation, volume, and depth. Profiles of temperature, dissolved oxygen, specific conductance, and pH were examined. Three of the four reservoirs exhibited stratification during the summer. The profiles indicate that stratification develops in all reservoirs except Lake Owen. Stratification developed in Rob Roy, Granite Springs, and Crystal Lake Reservoirs by mid-July in 1998 and continued until September, with the thickness of the epilimnion increasing during that time. Secchi disk readings indicated Rob Roy Reservoir had the clearest water of the four reservoirs studied. The composition of the phytoplankton community was different in the upper two reservoirs from that in the lower two reservoirs. Many of the species found in Rob Roy Reservoir and Lake Owen are associated with oligotrophic, nutrient-poor conditions. In contrast, many of the species found in Granite Springs and Crystal Lake Reservoirs are associated with mesotrophic or eutrophic conditions. The total number of taxa identified also increased downstream. The chemical water type in the reservoirs was similar, but dissolved-solids concentrations were greater in the downstream reservoirs. Water in all four reservoirs was a calcium-bicarbonate type. In the fall of 1997, Rob Roy Reservoir had the lowest dissolved-solids concentration (19 milligrams per liter), whereas Crystal Lake Reservoir had the highest concentration (63 milligrams per liter). Relatively little differences in the concentrations of major-ion species were noted between samples collected near the surface and near the bottom of the same reservoir. In contrast, iron and manganese concentrations generally were higher in samples collected near the bottom of a reservoir than in near-surface samples collected from the same reservoir. Composite bottom-sediment samples from all four reservoirs contained similar concentrations of bulk constituents such as aluminum, iron, phosphorus and titanium, but varied in concentrations of trace elements. Trace-element concentrations in Rob Roy Reservoir and Lake Owen were similar to the crustal average, whereas in Granite Springs and Crystal Lake Reservoirs the concentrations were similar to granitic rocks.

Wyoming↗
USGS2025

Permafrost–wildfire interactions: active layer thickness estimates for paired burned and unburned sites in northern high latitudes

As the northern high-latitude permafrost zone experiences accelerated warming, permafrost has become vulnerable to widespread thaw. Simultaneously, wildfire activity across northern boreal forest and Arctic/subarctic tundra regions impacts permafrost stability through the combustion of insulating organic matter, vegetation, and post-fire changes in albedo. Efforts to synthesis the impacts of wildfire on permafrost are limited and are typically reliant on antecedent pre-fire conditions. To address this, we created the FireALT dataset by soliciting data contributions that included thaw depth measurements, site conditions, and fire event details with paired measurements at environmentally comparable burned and unburned sites. The solicitation resulted in 52 466 thaw depth measurements from 18 contributors across North America and Russia. Because thaw depths were taken at various times throughout the thawing season, we also estimated end-of-season active layer thickness (ALT) for each measurement using a modified version of the Stefan equation. Here, we describe our methods for collecting and quality-checking the data, estimating ALT, the data structure, strengths and limitations, and future research opportunities. The final dataset includes 48 669 ALT estimates with 32 attributes across 9446 plots and 157 burned–unburned pairs spanning Canada, Russia, and the United States. The data span fire events from 1900 to 2022 with measurements collected from 2001 to 2023. The time since fire ranges from 0 to 114 years. The FireALT dataset addresses a key challenge: the ability to assess impacts of wildfire on ALT when measurements are taken at various times throughout the thaw season depending on the time of field campaigns (typically June through August) by estimating ALT at the end-of-season maximum. This dataset can be used to address understudied research areas, particularly algorithm development, calibration, and validation for evolving process-based models as well as extrapolating across space and time, which could elucidate permafrost–wildfire interactions under accelerated warming across the high-northern-latitude permafrost zone. The FireALT dataset is available through the Arctic Data Center ( https://doi.org/10.18739/A2RN3092P , Talucci et al., 2024).

Arctic↗
USGS2024

Using the horizontal-to-vertical spectral ratio method to estimate thickness of the Barry Arm landslide, Prince William Sound, Alaska

Conducting detailed investigations of large landslides is difficult, especially in the subsurface, largely due to environmental factors such as steep slopes, difficult access, and numerous objective hazards. These factors have made it challenging to accurately estimate the depth to the failure surface of the Barry Arm landslide, a large (roughly 10 8 cubic meters), deep-seated bedrock landslide in Prince William Sound, Alaska, recognized in 2019. The landslide has exhibited accelerated movement in recent years and poses a potential tsunamigenic hazard if rapid failure occurs. Failure surface depth, equivalent to landslide thickness, is a necessary metric for landslide-volume calculations and associated tsunami wave models. In this report, we used seismic noise recorded by a seismometer located on the Barry Arm landslide in Alaska to calculate the horizontal-to-vertical spectral ratio (HVSR) to investigate the site fundamental frequency ( f 0 ) and depth of the failure surface. To ensure that observed peak frequencies in the spectral ratio were related to the underlying stratigraphy (and not caused by other noise sources like nearby glaciers, topographic resonance, weather, or human activities), we also calculated HVSRs using earthquake signals, HVSRs at other seismic stations within a 2.5-kilometer radius, and a standard spectral ratio between the landslide station and other sites. We observed multiple peaks in the landslide HVSR curves at 1.5 hertz (Hz), 4–5 Hz, and 7–11 Hz. The frequencies of these peaks were consistent at the landslide site through time and across methods and were dissimilar to those identified at other seismic stations in the area, making it unlikely the peaks were caused by local noise. Directional HVSRs calculated at 15-degree intervals showed amplification of the higher frequency peaks in the direction parallel to slip, indicating two-dimensional site effects. We used the distinct frequency peaks in the seismic record to develop a 4-layer conceptual model of the landslide wherein the top of the deepest layer represents the primary failure surface, or the boundary between damaged (mobile) and undamaged material. We inverted Rayleigh wave ellipticity curves within this 4-layer configuration with constraints on S-wave velocity and layer thickness based on analogous material properties identified in the literature. This was necessary absent any site-specific subsurface S-wave velocity data. The best-fitting models indicate a mean slope-normal depth to the failure surface of 188 (±9) meters (m), with additional stratigraphic boundaries at 4 and 20 m below ground surface, potentially representing layered motion. These results agree with and improve upon ranges estimated by previous studies and can support future modeling and assessment efforts at Barry Arm.

Alaska↗
USGS2024

Geologic map of the northwest flank of Mauna Loa volcano, Island of Hawai‘i, Hawaii

Mauna Loa, the largest active volcano on Earth, has erupted 34 times since written descriptions became available in A.D. 1832. The most recent eruption of Mauna Loa occurred on November 27, 2022, after a 38 year hiatus; it lasted for 12 days. Some eruptions began with only brief seismic unrest, whereas others followed several months to a year of increased seismicity. Once underway, Mauna Loa’s eruptions can produce lava flows that may reach the sea in less than 24 hours, severing roads and utilities. For example, lava flows that erupted from the Southwest Rift Zone in 1950 advanced at an average rate of 9.3 kilometers per hour (5.8 miles per hour); all three lobes reached the ocean within ~24 hours. Near the eruptive vents, the flows likely traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa has great volcanic-hazard potential for the Island of Hawai‘i. Volcanic hazards on Mauna Loa can be anticipated, and risk substantially mitigated, by documenting its past activity to refine our knowledge of the hazards, and by alerting the public and local government officials of our findings and their implications for hazards assessments and risk. The map of the north and west flanks of Mauna Loa shows the distribution and relation of volcanic and surficial sedimentary deposits. It incorporates previously reported work published as generalized small-scale maps and a more detailed map. Within the mapped area, lava has flowed from three different source regions: the Northeast Rift Zone (22 percent), the summit (64 percent), and radial vents (14 percent). All three have different points of origin which, in turn, affect the flow characteristics and periodicity of activity. The map area includes the uppermost part of the NERZ and extends from the highest elevation––13,040 feet at the south end of the Kokoolau quadrangle, just below the summit caldera––to the sea northwest and west of the summit. Lava that erupts from the north and west flanks typically flows to the west, northwest, or north, depending on the vent location. Both morphologic lava flow types—‘a‘ā and pāhoehoe—are present. Pāhoehoe units tend to spread out or widen in low-slope regions, such as in the saddle regions between Mauna Loa and Mauna Kea or between Mauna Loa and Hualālai. In comparison, ʻaʻā flows generally produce narrower flow lobes that have higher relief. This map is the fifth in a series of five maps that will cover Mauna Loa volcano. NOTE: Map sheet 1 contains lines and type with overprint. This feature may be turned on or off in the Adobe Acrobat page display preferences.

Hawaii↗
USGS2025

Estimated hydrogeologic, spatial, and temporal distribution of self-supplied domestic groundwater withdrawals for aquifers of the Virginia Coastal Plain

Water use from private-domestic wells accounts for nearly 40 percent of total groundwater withdrawals in the Virginia Coastal Plain Physiographic Province (henceforth called the Virginia Coastal Plain). However, because self-supplied domestic water use generally falls below the Virginia Department of Environmental Quality (VDEQ) reporting and management threshold of 300,000 gallons per month, quantifying these withdrawals is challenging. This report builds upon the foundation of previous U.S. Geological Survey investigations by providing revised techniques to improve estimates of the aquifer source, spatial distribution, and monthly magnitude of these groundwater withdrawals. The aquifer sources of private-domestic wells in the Virginia Coastal Plain were estimated by cross-referencing 8,264 well records from the VDEQ and the Virginia Department of Health to a digital model of the Virginia Coastal Plain hydrogeologic framework. This analysis highlights the regional importance of the Yorktown-Eastover, Potomac, and surficial aquifers. Collectively, these three aquifers account for 80 percent of self-supplied domestic groundwater withdrawals. The population using self-supplied domestic water was estimated using census blocks, well-use ratios, building footprints, and land-use and land-cover data to produce a high-resolution, disaggregated, raster-based dataset. This approach improves upon previous models at the census-block or road-network scale by reducing the low-density spread of the self-supplied domestic population across undeveloped areas and concentrating the population and its corresponding water use in the areas where it is most likely to occur. Results show that an estimated 475,332 people comprise the 2020 self-supplied domestic population of the Virginia Coastal Plain, an increase of 5.7 percent since 2010, and the greatest concentrations of self-supplied domestic population surround large cities. Estimates could be further refined with the addition of current and complete spatial data on public water-system service areas. The quantity of water used by the self-supplied domestic population was estimated by modifying published state per-capita water-use coefficients with the corresponding monthly variability assessed from Virginia Coastal Plain public water-system withdrawal data. This analysis estimates an average increase of 12 percent from June through August and an average decrease of 8 percent from December through March from the baseline annual average of 80 gallons per day per capita, which generally matches similar studies in the eastern United States. The application of these revised methodologies for the estimation of private-domestic wells and the self-supplied domestic population improves understanding of domestic groundwater use in the Virginia Coastal Plain across hydrogeologic, spatial, and temporal scales. These revisions help better inform water-resource managers and decision makers and support higher resolution groundwater modeling. Furthermore, these methods are transferrable to other areas where self-supplied domestic water withdrawals are important to the overall water budget.

Virginia↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗