SEARCH · Geology Reports

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

USGS1996

The enigma of the New Madrid earthquakes of 1811-1812

Continental North America's greatest earthquake sequence struck on the western frontier of the United States. The frontier was not then California but the valley of the continent's greatest river, the Mississippi, and the sequence was the New Madrid earthquakes of the winter of 1811–1812. Their described impacts on the land and the river were so dramatic as to produce widespread modern disbelief. However, geological, geophysical, and historical research, carried out mostly in the past two decades, has verified much in the historical accounts. The sequence included at least six (possibly nine) events of estimated moment magnitude M ≥ 7 and two of M ≃ 8. The faulting was in the intruded crust of a failed intracontinental rift, beneath the saturated alluvium of the river valley, and its violent shaking resulted in massive and extensive liquefaction. The largest earthquakes ruptured at least six (and possibly more than seven) intersecting fault segments, one of which broke the surface as a thrust fault that disrupted the bed of the Mississippi River in at least 2 (and possibly four) places.

Arkansas, Kentucky, Missouri, Tennessee↗

USGS2020

Nodal seismograph recordings of the 2019 Ridgecrest Earthquake Sequence

The 2019 Ridgecrest, California earthquake sequence included M w 6.4 and Mw 7.1 earthquakes that occurred on successive days beginning on 4 July 2019. These two largest earthquakes of the sequence occurred on orthogonal faults that ruptured the Earth’s surface. To better evaluate the 3D subsurface fault structure, ( P - and S -wave) velocity, 3D and temporal variations in seismicity, and other important aspects of the earthquake sequence, we recorded aftershocks and ambient noise using up to 461 three-component nodal seismographs for about two months, beginning about one day after the M w 7.1 mainshock. The ~ 30,000 M w ≥1 earthquakes that were recorded on the dense arrays provide an unusually large volume of data with which to evaluate the earthquake sequence. This report describes the recording arrays and is intended to provide metadata for researchers interested in evaluating various aspects of the 2019 Ridgecrest earthquake sequence using the nodal data set.

California↗

USGS2005

Topography and Landforms of Ecuador

EXPLANATION The digital elevation model of Ecuador represented in this data set was produced from over 40 individual tiles of elevation data from the Shuttle Radar Topography Mission (SRTM). Each tile was downloaded, converted from its native Height file format (.hgt), and imported into a geographic information system (GIS) for additional processing. Processing of the data included data gap filling, mosaicking, and re-projection of the tiles to form one single seamless digital elevation model. For 11 days in February of 2000, NASA, the National Geospatial-Intelligence Agency (NGA), the German Aerospace Center (DLR), and the Italian Space Agency (ASI) flew X-band and C-band radar interferometry onboard the Space Shuttle Endeavor. The mission covered the Earth between 60?N and 57?S and will provide interferometric digital elevation models (DEMs) of approximately 80% of the Earth's land mass when processing is complete. The radar-pointing angle was approximately 55? at scene center. Ascending and descending orbital passes generated multiple interferometric data scenes for nearly all areas. Up to eight passes of data were merged to form the final processed SRTM DEMs. The effect of merging scenes averages elevation values recorded in coincident scenes and reduces, but does not completely eliminate, the amount of area with layover and terrain shadow effects. The most significant form of data processing for the Ecuador DEM was gap-filling areas where the SRTM data contained a data void. These void areas are a result of radar shadow, layover, standing water, and other effects of terrain, as well as technical radar interferometry phase unwrapping issues. To fill these gaps, topographic contours were digitized from 1:50,000 - scale topographic maps which date from the mid-late 1980's (Souris, 2001). Digital contours were gridded to form elevation models for void areas and subsequently were merged with the SRTM data through GIS and remote sensing image-processing techniques. The data contained in this publication includes a gap filled, countrywide SRTM DEM of Ecuador projected in Universal Transverse Mercator (UTM) Zone 17 North projection, Provisional South American, 1956, Ecuador datum and a non gap filled SRTM DEM of the Galapagos Islands projected in UTM Zone 15 North projection. Both the Ecuador and Galapagos Islands DEMs are available as an ESRI Grid, stored as ArcInfo Export files (.e00), and in Erdas Imagine (IMG) file formats with a 90 meter pixel resolution. Also included in this publication are high and low resolution Adobe Acrobat (PDF) files of topography and landforms maps in Ecuador. The high resolution map should be used for printing and display, while the lower resolution map can be used for quick viewing and reference purposes.

Data Series↗

USGS2019

Hydrogen isotopes in high 3He/4He submarine basalts: Primordial vs. recycled water and the veil of mantle enrichment

The hydrogen isotope value ( δ D) of water indigenous to the mantle is masked by the early degassing and recycling of surface water through Earth's history. High 3 He/ 4 He ratios in some ocean island basalts, however, provide a clear geochemical signature of deep, primordial mantle that has been isolated within the Earth's interior from melting, degassing, and convective mixing with the upper mantle. Hydrogen isotopes were measured in high 3 He/ 4 He submarine basalt glasses from the Southeast Indian Ridge (SEIR) at the Amsterdam–St. Paul (ASP) Plateau ( δ D = −51 to −90‰, 3 He/ 4 He = 7.6 to 14.1 R A ) and in submarine glasses from Loihi seamount south of the island of Hawaii ( δ D = −70 to −90‰, 3 He/ 4 He = 22.5 to 27.8 R A ). These results highlight two contrasting patterns of δ D for high 3 He/ 4 He lavas: one trend toward high δ D of approximately −50‰, and another converging at δ D = −75‰. These same patterns are evident in a global compilation of previously reported δ D and 3 He/ 4 He results. We suggest that the high δ D values result from water recycled during subduction that is carried into the source region of mantle plumes at the core–mantle boundary where it is mixed with primordial mantle, resulting in high δ D and moderately high 3 He/ 4 He. Conversely, lower δ D values of −75‰, in basalts from Loihi seamount and also trace element depleted mid-ocean ridge basalts, imply a primordial Earth hydrogen isotopic value of −75‰ or lower. δ D values down to −100‰ also occur in the most trace element-depleted mid-ocean ridge basalts, typically in association with 87 Sr/ 86 Sr ratios near 0.703. These lower δ D values may be a result of multi-stage melting history of the upper mantle where minor D/H fractionation could be associated with hydrogen retention in nominally anhydrous residual minerals. Collectively, the predominance of δ D around −75‰ in the majority of mid-ocean ridge basalts and in high 3 He/ 4 He Loihi basalts is consistent with an origin of water on Earth that was dominated by accretion of chondritic material.

Earth and Planetary Science Letters↗

USGS2019

Rare earth element mineral deposits in the United States

Because of their unique special chemical properties, many of the metals in the group of rare earth elements (REEs) have essential applications in 21st century technologies. Examples of products that use REEs are cell phones, computers, fluorescent and light-emitting-diode lights, flat-screen television and computer monitors, and in high-strength magnets used by clean energy technologies such as the generators of wind turbines and batteries of hybrid and electric vehicles. REEs are used in many defense applications, such as in components of jet engines, missile guidance systems, antimissile defense systems, satellites, and communication systems. The rare earth elements have become vital to manufacturing numerous high-tech products, which has been accompanied by a large increase in their demand. At the same time, there has been concern by the United States and many other Nations about the near-monopoly of mining, processing, and supply of REEs from one Nation, China. Between 2011 and 2017, China produced approximately 84 percent of the world’s REEs, and during this time the United States only produced REEs between 2012 and 2015. The U.S. production came entirely from the Mountain Pass mine in California, providing only about 4 percent of the world REE supply. Because REEs are essential for technological applications and are primarily supplied by one Nation, there has been an increased concern in identifying new sources of REEs, including economic REE deposits. In response to these concerns, since 2009, the U.S. Geological Survey (USGS) has conducted numerous studies focused on the distribution, geology, and potential resources for the REE-bearing mineral deposits in the United States. The basic characteristics of mineral deposit types that host REE enrichments in the United Sates are summarized in this report, with selected examples. Several types of REE-enriched mineral deposits are reviewed, including deposits in carbonatites, alkaline igneous rocks, sedimentary phosphate-rich rocks (phosphorite), regions containing REE-rich veins, iron oxide deposits containing REE-bearing apatite, monazite-xenotime-bearing placer deposits (heavy-mineral sands), and ion-adsorption clay deposits (REE in granite-derived regolith). A better understanding of these mineral deposits will assist in identifying domestic resources to help alleviate the dependence on imported REEs. The economic development of REE mineral deposits is affected by many factors beyond mining, such as commodity prices and mineral processing costs. Most of the REEs are hosted by minerals that have complex chemical formulas; this presents more challenges to process and extract the REEs. Continued advancements and refinements in mineral processing techniques may allow REE deposits with complex mineralogy to be economically developed in the future.

Circular↗

USGS1987

Moment tensor solutions estimated using optimal filter theory for 51 selected earthquakes, 1980-1984

The 51 global events that occurred from January 1980 to March 1984, which were chosen by the convenors of the Symposium on Seismological Theory and Practice, have been analyzed using a moment tensor inversion algorithm (Sipkin). Many of the events were routinely analyzed as part of the National Earthquake Information Center's (NEIC) efforts to publish moment tensor and first-motion fault-plane solutions for all moderate- to large-sized (mb>5.7) earthquakes. In routine use only long-period P-waves are used and the source-time function is constrained to be a step-function at the source (??-function in the far-field). Four of the events were of special interest, and long-period P, SH-wave solutions were obtained. For three of these events, an unconstrained inversion was performed. The resulting time-dependent solutions indicated that, for many cases, departures of the solutions from pure double-couples are caused by source complexity that has not been adequately modeled. These solutions also indicate that source complexity of moderate-sized events can be determined from long-period data. Finally, for one of the events of special interest, an inversion of the broadband P-waveforms was also performed, demonstrating the potential for using broadband waveform data in inversion procedures. ?? 1987.

Physics of the Earth and Planetary Interiors↗

USGS2025

In situ, modeled, and earth observation monitoring of surface water availability in West African rangelands

Introduction: Rangeland ponds are vital to the livelihoods of pastoral and agropastoral communities in Africa, providing an important source of water for livestock. However, sparse instrumentation across much of Africa makes it extremely challenging to monitor surface water availability in these areas. Model estimates of surface water, for example, as used by the Famine Early Warning Systems Network (FEWS NET) Water Point Viewer, are one of the few operational tools available to monitor surface water stress across pastoral areas of the Sahel and East Africa. Methods: Water availability data from these models are difficult to validate. New methods using satellite data to classify surface water provide an opportunity to assess the performance of these tools. This study compares water availability estimates derived from Landsat and Sentinel 1 satellite imagery to in situ observations and model simulations of water availability in 22 ephemeral ponds located in the Ferlo region of Senegal. Results and discussion: The Active-Passive Water Classification (APWC) algorithm detected surface water at each location. Over 2022 and 2023, water was detected in pond locations annually at a frequency of 68.2% for all ponds and at a frequency of 43.8% for ponds with a surface area <10,000 square meters (m 2 ). The APWC results outperform global and continental surface water datasets in the Ferlo region. Seasonal water availability was captured in 12 ponds over the 2022 and 2023 seasons. The 12 locations can function as sentinel ponds to monitor local water availability. Study results demonstrate the viability of satellite methods to assess water availability in the region, as well as the challenges to using satellite-based methods to estimate water availability in small ponds.

Ferlo Region↗

USGS1989

Chemistry and origin of minor and trace elements in vitrinite concentrates from a rank series from the eastern United States, England, and Australia

A rank series consisting of twelve vitrinite concentrates and companion whole-coal samples from mined coal beds in the eastern United States, England, and Australia were analyzed for C, H, N, O, ash, and 47 trace and minor elements by standard elemental, instrumental neutron activation analysis (INAA), and direct-current-arc spectrographic (DCAS) techniques. The reflectance of vitrinite, atomic H:C and O:C, and ash-free carbon data were used to determine ranks that range from high-volatile C bituminous coal to meta-anthracite. A van Krevelen (atomic H:C vs. O:C) diagram of the vitrinite concentrates shows a smooth curve having its lowest point at H:C = 0.18 and O:C = 0.01. This improves the van Krevelen diagram by the addition of our vitrinite concentrate from meta-anthracite from the Narragansett basin of New England. Boron content (400–450 ppm) in two Illinois basin vitrinite concentrates was about an order of magnitude higher than B contents in other concentrates analyzed. We attribute this to marine origin or hydrothermal activity. The alkaline-earth elements Ca, Mg and Ba (DCAS) have higher concentrations in our vitrinite concentrates from bituminous coals of the Appalachian basin, than they do in vitrinite concentrates from the marine-roofed bituminous coals of the Illinois basin; therefore, a nonmarine origin for these alkaline-earth elements is postulated for the Appalachian basin coals. An ion-exchange mechanism due to high concentrations of these elements as ions in diagenetic water, but probably not recent ground water, may be responsible for the relatively high values of these elements in Appalachian concentrates. Higher concentrations of Ni and Cr in one of the English vitrinite concentrates and of Zr in the Australian concentrate probably indicate organic association and detrital influence, respectively.

International Journal of Coal Geology↗

USGS2011

Rotational motions for teleseismic surface waves

[1] We report the findings for the first teleseismic six degree‐of‐freedom (6‐DOF) measurements including three components of rotational motions recorded by a sensitive rotation‐rate sensor (model R‐1, made by eentec) and three components of translational motions recorded by a traditional seismometer (STS‐2) at the NACB station in Taiwan. The consistent observations in waveforms of rotational motions and translational motions in sections of Rayleigh and Love waves are presented in reference to the analytical solution for these waves in a half space of Poisson solid. We show that additional information (e.g., Rayleigh wave phase velocity, shear wave velocity of the surface layer) might be exploited from six degree‐of‐freedom recordings of teleseismic events at only one station. We also find significant errors in the translational records of these teleseismic surface waves due to the sensitivity of inertial translation sensors (seismometers) to rotational motions. The result suggests that the effects of such errors need to be counted in surface wave inversions commonly used to derive earthquake source parameters and Earth structure.

Geophysical Research Letters↗

USGS2024

Earth’s free surface complicates inference of absolute stress from earthquake-Induced stress rotations

The stress redistribution from an earthquake can produce localized measurable rotations of the principal stress axes if the absolute level of differential stress in the crust in on the order of the earthquake stress drop. Two simple analytic solutions have been developed to estimate the differential stress from an observed stress rotation. However, each has assumptions that may not be accurate near Earth’s free surface. I model synthetic earthquakes in an elastic half-space, and show that the assumptions of the methods are accurate for strike-slip earthquakes, and for deep dip-slip earthquakes. However, they are incorrect for shallow dip-slip earthquakes. I introduce a free surface correction for one of the methods for dip-slip earthquakes. I revise an analysis of stress rotations due to great subduction zone earthquakes, including this correction. The results support the original conclusion of near complete stress drop for many shallow subduction zone earthquakes.

Geophysical Research Letters↗

USGS2015

USGS Arctic Science Strategy

The United States is one of eight Arctic nations responsible for the stewardship of a polar region undergoing dramatic environmental, social, and economic changes. Although warming and cooling cycles have occurred over millennia in the Arctic region, the current warming trend is unlike anything recorded previously and is affecting the region faster than any other place on Earth, bringing dramatic reductions in sea ice extent, altered weather, and thawing permafrost. Implications of these changes include rapid coastal erosion threatening villages and critical infrastructure, potentially significant effects on subsistence activities and cultural resources, changes to wildlife habitat, increased greenhouse-gas emissions from thawing permafrost, threat of invasive species, and opening of the Arctic Ocean to oil and gas exploration and increased shipping. The Arctic science portfolio of the U.S. Geological Survey (USGS) and its response to climate-related changes focuses on landscapescale ecosystem and natural resource issues and provides scientific underpinning for understanding the physical processes that shape the Arctic. The science conducted by the USGS informs the Nation's resource management policies and improves the stewardship of the Arctic Region.

Fact Sheet↗

USGS2003

Station corrections for the Katmai Region Seismic Network

Most procedures for routinely locating earthquake hypocenters within a local network are constrained to using laterally homogeneous velocity models to represent the Earth's crustal velocity structure. As a result, earthquake location errors may arise due to actual lateral variations in the Earth's velocity structure. Station corrections can be used to compensate for heterogeneous velocity structure near individual stations (Douglas, 1967; Pujol, 1988). The HYPOELLIPSE program (Lahr, 1999) used by the Alaska Volcano Observatory (AVO) to locate earthquakes in Cook Inlet and the Aleutian Islands is a robust and efficient program that uses one-dimensional velocity models to determine hypocenters of local and regional earthquakes. This program does have the capability of utilizing station corrections within it's earthquake location proceedure. The velocity structures of Cook Inlet and Aleutian volcanoes very likely contain laterally varying heterogeneities. For this reason, the accuracy of earthquake locations in these areas will benefit from the determination and addition of station corrections. In this study, I determine corrections for each station in the Katmai region. The Katmai region is defined to lie between latitudes 57.5 degrees North and 59.00 degrees north and longitudes -154.00 and -156.00 (see Figure 1) and includes Mount Katmai, Novarupta, Mount Martin, Mount Mageik, Snowy Mountain, Mount Trident, and Mount Griggs volcanoes. Station corrections were determined using the computer program VELEST (Kissling, 1994). VELEST inverts arrival time data for one-dimensional velocity models and station corrections using a joint hypocenter determination technique. VELEST can also be used to locate single events.

Alaska↗

USGS1981

Bimodal Silurian and Lower Devonian volcanic rock assemblages in the Machias-Eastport area, Maine

Exposed in the Machias-Eastport area of southeastern Maine is the thickest (at least 8,000 m), best exposed, best dated, and most nearly complete succession of Silurian and Lower Devonian volcanic strata in the coastal volcanic belt, remnants of which crop out along the coasts of southern New Brunswick, Canada, and southeastern New England in the United States. The volcanics were erupted through the 600-700-million-year-old Avalonian sialic basement. To test the possibility that this volcanic belt was a magmatic arc above a subduction zone prior to presumed Acadian continental collision, samples representing the entire section in the Machias-Eastport area of Maine were chemically analyzed. Three strongly bimodal assemblages of volcanic rocks and associated intrusives are recognized, herein called the Silurian, older Devonian, and younger Devonian assemblages. The Silurian assemblage contains typically nonporphyritic high-alumina tholeiitic basalts, basaltic andesites, and diabase of continental characterand calc-alkalic rhyolites, silicic dacites, and one known dike of andesite. These rocks are associated with fossiliferous, predominantly marine strata of the Quoddy, Dennys, and Edmunds Formations, and the Leighton Formation of the Pembroke Group (the stratigraphic rank of both is revised herein for the Machias-Eastport area), all of Silurian age. The shallow marine Hersey Formation (stratigraphic rank also revised herein) of the Pembroke Group, of latest Silurian age (and possibly earliest Devonian, as suggested by an ostracode fauna), contains no known volcanics; and it evidently was deposited during a volcanic hiatus that immediately preceded emergence of the coastal volcanic belt and the eruption of the older Devonian assemblage. The older Devonian assemblage, in the lagoonal to subaerial Lower Devonian Eastport Formation, contains tholeiitic basalts and basaltic andesites, typically with abundant plagioclase phenocrysts and typically richer in iron and titanium and poorer in magnesium and nickel than the Silurian basalts; and the Eastport Formation has rhyolites and silicic dacites that have higher average SiO2 and K2O contents and higher ratios of FeO* to MgO than the Silurian ones. The younger Devonian assemblage is represented by one sample of basalt from a flow in red beds of the post-Acadian Upper Devonian Perry Formation, and by three samples from pre-Acadian diabases that intrude the Leighton and Hersey Formations. These rocks are even richer in titanium and iron and poorer in magnesium and nickel than the older Devonian basalts. Post-Acadian granitic plutons exposed along the coastal belt for which analyses are available are tentatively included in the younger Devonian assemblage. The most conspicuous features of the coastal volcanics and associated intrusives are the preponderance of rocks of basaltic composition ( < 52 percent SiO2 ) in the Silurian assemblage, and the near absence in all assemblages of intermediate rocks having 57-67 percent SiO2 (calculated without volatiles). All the rocks are variably altered spilites and keratophyres. The basaltic types are adequately defined, however, by eight samples of least altered basalts having calcic plagioclase, clinopyroxene, and 0.5 percent or less CO2 , The more altered basalts are variably enriched or depleted in Na2O, K2O, and CaO relative to the least altered ones. In the silicic rocks no primary ferromagnesian minerals are preserved. The Na2O and K2O contents of the silicic rocks are erratic; they are approximately reciprocal, possibly owing to alkali exchange while the rocks were still glassy. We propose that the coastal volcanic belt extended along an axis of thermal swelling in the Earth's mantle and upward intrusion of partially melted mantle into the sialic Avalonian crust. These processes were accompanied by shoaling and emergence of the belt, and they produced the bimodal volcanism. Tholeiitic basaltic melts segregated from mantle material

Professional Paper↗

USGS1967

Effects of the earthquake of March 27, 1964, at Seward, Alaska

Seward, in south-central Alaska, was one of the towns most devastated by the Alaska earthquake of March 27, 1964. The greater part of Seward is built on an alluvial fan-delta near the head of Resurrection Bay on the southeast coast of the Kenai Peninsula. It is one of the few ports in south-central Alaska that is ice free all year, and the town’s economy is almost entirely dependent upon its port facilities. The Alaska earthquake of March 27, 1964, magnitude approximately 8.3–8.4, began at 6:36 p.m. Its epicenter was in the northern part of the Prince William Sound area; focal depth was 20–50 km. Strong ground motion at Seward lasted 3–4 minutes. During the shaking, a strip of land 50–400 feet wide along the Seward waterfront, together with docks and other harbor facilities, slid into Resurrection Bay as a result of large-scale submarine landsliding. Fractures ruptured the ground for'severa1 hundred feet back from the landslide scarps. Additional ground was fractured in the Forest Acres subdivision and on the alluvial floor of the Resurrection River valley; fountaining and sand boils accompanied the ground fracturing. Slide-generated wares, possibly seiche waves, and seismic sea waves crashed onto shore; ware runup was as much as 30 feet above mean lower low water and caused tremendous damage; fire from burning oil tanks added to the destruction. Damage from strong ground motion itself was comparatively minor. Tectonic subsidence of about 3.6 feet resulted in low areas being inundated at high tide. Thirteen people were killed and five were injured as a result of the earthquake. Eighty-six houses were totally destroyed and 260 were heavily damaged. The harbor facilities were almost completely destroyed, and the entire economic base of the town was wiped out. The total cost to replace the destroyed public and private facilities was estimated at $22 million. Seward lies on the axis of the Chugach Mountains geosyncline. The main structural trend in the mapped area, where the rocks consist almost entirely of graywacke and phyllite, is from near north to N. 20° E. Beds and cleavage of the rocks commonly dip 70° W. or NW. to near vertical. Locally, the rocks are complexly folded or contorted. So major faults were found in the mapped area, but small faults, shear zones, and joints are common. Surficial deposits of the area hare been divided for mapping into the following units: drift deposits, alluvial fan deposits, valley alluvium, intertidal deposits, landslide deposits, and artificial fill. Most of these units intergrade and were deposited more or less contemporaneously. The drift deposits consist chiefly of till that forms moraines along the lower flanks of the Resurrection River valley and up tributary valleys. The till is predominantly silt and sand and lesser amounts of clay-size particles, gravel, cobbles, and boulders. Glacial outwash and stratified ice-contact deposits constitute the remainder of the drift deposits. Fans and fan-deltas have been deposited at the valley mouths of tributary streams. Some, including the one upon which Seward built, project into Resurrection Bay, and deltaic-type deposits form their distal edges. The larger fans—composed chiefly of loosely compacted and poorly sorted silt, sand, and gravel—form broad aprons having low gradients. The fan deposits range in thickness from about 100 feet to possibly several hundred feet and, at least in some places, lie on a platform of compact drift. Smaller fans at the mouths of several canyons have steep gradients and considerable local relief. Valley alluvium, deposited chiefly by the Resurrection River, consists mostly of coarse sand and fine to medium gravel. In the axial part of the valley it is probably more than 100 feet thick. Near the head of Resurrection Bay, the alluvium is underlain by at least 75 feet of marine deltaic sediments, which are in turn underlain by 600 or more feet of drift in the deepest part of the bedrock valley. Beach, deltaic, and estuarine sediments, deposited on intertidal flats at the head of the bay and along far1 margins that extend into the bay, arc mapped as intertidal deposits. They consist mostly of silt, sand, and fine gravel, and lesser amounts of clay-size particles. The earthquake reactivated old slides and trigged new ones in the mountains. Rock and snow avalanches, debris flows, and creep of talus deposits characterized slide activity on the steeper slops. The Seward waterfront had been extended before the earthquake by adding artificial fill consisting of loose sand and gravel; part of the lagoon area had been filled with refuse. After the earth- quake, fill, consisting of silt and sand dredged from the head of the bay, was pumped onto part of the lagoon area and also on land at the northwest corner of the bay. Response to the disaster was immediate and decisive. City, State, and Federal agencies, as well as other organizations and individuals, gave unstintingly of their time and facilities. Within a few days, there was temporary restoration of water, sewerage, and electrical facilities. The U.S. Army Corps of Engineers was authorized to select sites and construct a new dock for the Alaska Railroad, a new small-boat basin, and related facilities. The firm of Shannon and Wilson, Inc., under contract to the Corps of Engineers, investigated subsurface soils extensively to determine the factors responsible for the sliding along the Seward waterfront and to assist in site selection for reconstruction of the destroyed harbor facilities. Borings also made along the Seward waterfront and at the head of the bay, and laboratory tests were conducted on pertinent samples. These studies were augmented by geophysical studies both on land and in the bay. In addition, the Corps of Engineers made shallow borings on the intertidal flats at the head of the bay and performed pile-driving and load tests. Borings also were drilled and test pits were dug in the subdivision of Forest Acres. Sliding along the Seward waterfront markedly deepened the water along the former shoreline. Post-earthquake slopes of the bay floor immediately offshore also are steeper in places than before the earthquake. The strong ground motion of the earthquake triggered the landsliding, but several factors may have contributed to the magnitude and characteristics of the slides. These factors are: (1) the long duration of strong ground motion, (2) the grain size and texture of the material involved in the sliding, (3) the probability that the finer grained materials liquefied and flowed seaward, and (4) the added load of manmade facilities built on the edge of the shore, Secondary effects of the slides themselves—sudden drawdown of water, followed by the weight of returning waves—also may have contributed to the destruction. Submarine sliding at the northwest corner of the bay occurred in fine-grained deltaic deposits whose frontal slopes probably were in metastable equilibrium under static conditions. Uplift pressures from aquifers under hydrostatic head, combined with the probable liquefaction characteristics of the sediments when vibrated by strong ground motion, probably caused the material to slide and flow seaward as a heavy slurry. Under static conditions, no major shoreline or submarine landsliding is expected in the Seward area; in the event of another severe earthquake, however, additional sliding is likely along the Seward waterfront and also in the deltaic deposits at the northwest corner of the bay. Fractured ground in back of the present shoreline along the Seward waterfront is an area of incipient landslides that would be unstable under strong shaking. For this reason the Scientific and Engineering Task Force placed the area in a high-risk classification and recommended no repair, rehabilitation, or new construction in this area involving use of Federal funds; it was further recommended that the area should be reserved for park or other uses that do not involve large congregations of people. The deltaic deposits at the head of the bay probably also would be susceptible to sliding during another large earthquake. This sliding would result in further landward retreat of the present shoreline toward the new railroad dock. Specifications for the new dock, whose seaward end is now approximately 1,100 feet from the back scarp of the subaqueous landslide, require design pro- visions to withstand seismic shock up to certain limits. Earthquake-induced fracturing of the ground in the subdivision of Forest Acres was confined to the lower part of a broad alluvial fan. There, sewer and water lines were ruptured and the foundations of some homes were heavily damaged. Landsliding, such as occurred along the shoreline of the bay, was not a contributing cause of the fracturing. Two hypotheses are offered to explain the fracturing: 1. Seismic energy was transformed into visible surface waves of such amplitude that the strength of surface layer was exceeded and rupturing occurred; tensional and compressional stresses alternately opened and closed the fractures and forced out water and mud. 2. Compaction by vibration of the fine-grained deposits of the fan caused ground settlement and fracturing; ground water under temporary hydrostatic head was forced to the surface as fountains and carried the finer material with it. Water waves that crashed onto shore, while shaking was still continuing, were generated chiefly by onshore and offshore landsliding. Waves that overran the shores about 25 minutes after shaking stopped and that continued to arrive for the next several hours are believed to be seismic sea waves (tsunamis) that originated in an uplifted area in the Gulf of Alaska. During the time of seismic sea-wave activity and perhaps preceding it, seiche wares also may have been generated within Resurrection Bay and complicated the wave effects along the shoreline.

Alaska↗

USGS2003

Geothermal energy: clean power from the Earth's heat

Societies in the 21st century require enormous amounts of energy to drive the machines of commerce and to sustain the lifestyles that many people have come to expect. Today, most of this energy is derived from oil, natural gas, and coal, supplemented by nuclear power. Local exceptions exist, but oil is by far the most common source of energy worldwide. Oil resources, however, are nonrenewable and concentrated in only a few places around the globe, creating uncertainty in long-term supply for many nations. At the time of the Middle East oil embargo of the 1970s, about a third of the United States oil supply was imported, mostly from that region. An interruption in the flow of this import disrupted nearly every citizen’s daily life, as well as the Nation’s economy. In response, the Federal Government launched substantial programs to accelerate development of means to increasingly harness “alternative energies”—primarily biomass, geothermal, solar, and wind. The new emphasis on simultaneously pursuing development of several sources of energy recognized the timeless wisdom found in the proverb of “not putting all eggs in one basket.” This book helps explain the role that geothermal resources can play in helping promote such diversity and in satisfying our Nation’s vast energy needs as we enter a new millennium. For centuries, people have enjoyed the benefits of geothermal energy available at hot springs, but it is only through technological advances made during the 20th century that we can tap this energy source in the subsurface and use it in a variety of ways, including the generation of electricity. Geothermal resources are simply exploitable concentrations of the Earth’s natural heat (thermal energy). The Earth is a bountiful source of thermal energy, continuously producing heat at depth, primarily by the decay of naturally occurring radioactive isotopes—principally of uranium, thorium, and potassium—that occur in small amounts in all rocks. This heat then rises to and through the Earth’s surface, where it escapes into the atmosphere. The amount of heat that flows annually from the Earth into the atmosphere is enormous—equivalent to ten times the annual energy consumption of the United States and more than that needed to power all nations of the world, if it could be fully harnessed. Even if only 1 percent of the thermal energy contained within the uppermost 10 kilometers of our planet could be tapped, this amount would be 500 times that contained in all oil and gas resources of the world. How might we benefit from this vast amount of thermal energy beneath our feet? Where, by what means, and how much of the Earth’s natural heat can be usefully harnessed? These are especially important questions to contemplate, because global population is expected to soon exceed seven billion and many scientists believe that the world’s fossilfuel resources may be substantially depleted within this century. Faced with such prospects, both the public and private sectors are working toward more fully utilizing the Earth’s abundant thermal energy and other alternative energy resources. A skeptic might question the wisdom of devoting much national effort to geothermal energy development, especially because many experts think that geothermal heat can contribute at most about 10 percent to the Nation’s energy supply using current technologies. However, ongoing advances in exploration and heat-extraction technologies are improving our ability to use the resource and may substantially increase the geothermal contribution to the Nation’s energy supply. In an attempt to help national planners and average citizens alike understand the nature and energy potential of geothermal resources, this book (1) describes the distribution and nature of geothermal energy, (2) reviews the common types of geothermal systems that provide useful energy with current technology, (3) considers potential geothermal resources that might someday be tapped with developing technologies, and (4) summarizes the role of earth-science information in assessing and harnessing geothermal resources wherever they occur worldwide. The predecessor to this book (Tapping the Earth’s Natural Heat, U.S. Geological Survey Circular 1125, published in 1994) summarized the situation in the early 1990s. In an effort to support national energy planners, this new circular incorporates more recent advances in geothermal science and technology.

Circular↗

USGS2019

Locating shallow seismic sources with waves scattered by surface topography: Validation of the method at the Nevada Test Site

Accurate and robust source location is fundamental in seismology. Previously, we proposed a new full waveform location method using waves scattered by topography near the source, and we demonstrated its potential in obtaining accurate source location using synthetic data. In the work presented here, we validate this method with observed seismic data from the 1993 Non-Proliferation Experiment, a chemical explosion with a precisely known location in a region with moderate topography at the Nevada Test Site. We select the first arrivals (Pn/Pg) and their immediate codas to determine the source location and compare our solution with the known location. We use a collocated-grid finite-difference method to calculate the strain Green’s tensor in a grid-search volume containing the source, and obtain three-component synthetic waveforms at 12 broadband seismic stations at regional distances using source-receiver reciprocity. We assess the solution using a least-squares misfit between the observed and synthetic waveforms. When scattered coda waves are incorporated, the best solution is within a few hundreds of meters of the exact source location, and the estimated uncertainty of the solution is reduced compared to the waveform based solution using only the P waves. The solution is robust to the choice of the frequency content and to the addition of random velocity heterogeneity. We conclude that the full waveform source location method is effective for real seismic data, though more validation tests like this one are needed to further understand its efficacy for source-station geometry, roughness of topography, signal quality and other factors.

Nevada↗

USGS1987

The formation and failure of natural dams

Of the numerous kinds of dams that form by natural processes, dams formed from landslides, glacial ice, and neoglacial moraines present the greatest threat to people and property. The most common types of mass movements that form landslide dams are rock and debris avalanches, rock and soil slumps and slides, and mud, debris, and earth flows. The most common initiation mechanisms for dam-forming landslides are excessive rainfall and snowmelt and earthquakes. Landslide dams can be classified into six categories based on their relation with the valley floor. Type I dams (11%) of the 81 landslide dams around the world that were classifed do not reach from one valley side to the other. Type II dams (44%) span the entire valley flood, occasionally depositing material high up on opposite valley sides. Type III dams (41%) move considerable distances both upstream and downstream from the landslide failure. Type IV dams (1%) are rare and involve the contemporaneous failure of material from both sides of a valley. Type V dams (1%) are also rare, and are created when a single landslide sends multiple tongues of debris into a valley forming two or more landslide dams in the same surfaces, that extend under the stream or valley and emerge on the opposite valley side. Many landslide dams fail shortly after formation. Overtopping is by far the most common cause of failure. Glacial ice dams can produce at least nine kinds of ice-dammed lakes. The most dangerous are lakes formed in main valleys dammed by tributary glaciers. Failure can occur by erosion of a drainage tunnel under or through the ice dam or by a channel over the ice dam. Cold polar ice dams generally drain supraglacially or marginally by downmelting of an outlet channel. Warmer temperate-ice dams tend to fail by sudden englacial or subglacial breaching and drainage. Late neoglacial moraine-dammed lakes are located in steep mountain areas affected by the advances and retreats of valley glaciers in the last several centuries. The most common reported failure mechanism is overtopping and breaching by a wave or series of waves in the lake, generated by icefalls, rockfalls, or snow or rock avalanches. Melting of ice-cores or frozen ground and piping and seepage are other possible failure mechanisms. (Lantz-PTT)

Open-File Report↗

USGS2022

The occurrence and hazards of great subduction zone earthquakes

Subduction zone earthquakes result in some of the most devastating natural hazards on Earth. Knowledge of where great (moment magnitude M ≥ 8) subduction zone earthquakes can occur and how they rupture is critical to constraining future seismic and tsunami hazards. Since the occurrence of well-instrumented great earthquakes, such as the 2004 M 9.1 Sumatra–Andaman and 2011 M 9.1 Tohoku earthquakes, the hypotheses that plate age and convergence rate influence the ability of subduction zones to host large earthquakes have been dispelled. In this Review, we highlight how certain subduction zone properties might influence the location and characteristics of great earthquake rupture and impact seismic and tsunami hazard. The rupture characteristics of great earthquakes that most heavily impact earthquake hazards include the rupture extent (seaward and landward), location of strong motion-generating areas and earthquake recurrence. By contrast, large slip or displacement at the seafloor is one of the major controls of tsunami hazard. Future improvements in addressing hazards posed by subduction zones depend heavily on sustained geophysical monitoring in subduction zone systems (both onshore and offshore), expanded development of palaeoseismic data sets and improved integration of observations and models across disciplines and timescales.

Nature Reviews Earth & Environment↗