Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
USGS2017

Geologic map of the Beacon Rock quadrangle, Skamania County, Washington

The Beacon Rock 7.5′ quadrangle is located approximately 50 km east of Portland, Oregon, on the north side of the Columbia River Gorge, a scenic canyon carved through the axis of the Cascade Range by the Columbia River. Although approximately 75,000 people live within the gorge, much of the region remains little developed and is encompassed by the 292,500-acre Columbia River Gorge National Scenic Area, managed by a consortium of government agencies “to pro­tect and provide for the enhancement of the scenic, cultural, recreational and natural resources of the Gorge and to protect and support the economy of the Columbia River Gorge area.” As the only low-elevation corridor through the Cascade Range, the gorge is a critical regional transportation and utilities corridor (Wang and Chaker, 2004). Major state and national highways and rail lines run along both shores of the Columbia River, which also provides important water access to ports in the agricultural interior of the Pacific Northwest. Transmission lines carry power from hydroelectric facilities in the gorge and farther east to the growing urban areas of western Oregon and Washington, and natural-gas pipelines transect the corridor (Wang and Chaker, 2004). These lifelines are highly vulnerable to disruption by earthquakes, landslides, and floods. A major purpose of the work described here is to identify and map geologic hazards, such as faults and landslide-prone areas, to provide more accurate assessments of the risks associated with these features. The steep canyon walls of the map area reveal exten­sive outcrops of Miocene flood-basalt flows of the Columbia River Basalt Group capped by fluvial deposits of the ances­tral Columbia River, Pliocene lavas erupted from the axis of the Cascade arc to the east, and volcanic rocks erupted from numerous local vents. The Columbia River Basalt Group unconformably rests on a sequence of late Oligocene and early Miocene rocks of the ancestral Cascade volcanic arc, which underlies most of the map area. The resistant flood-basalt flows form some of the famous landforms in the map area, such as Hamilton Mountain. Extensive landslide complexes have devel­oped where the basalt flows were emplaced on weak volcani­clastic rocks.

Washington↗
USGS1995

Stratigraphy and paleoenvironments of the Shell 410-1 well, Georges Bank Basin, US North Atlantic outer continental shelf

The Shell 410-1 well is the most downdip (seaward) hydrocarbon exploratory well in the Georges Bank Basin. It was drilled to a total depth of 4745 m RKB, and penetrated a section composed of Middle Jurassic to Quaternary sedimentary rocks. The lithostratigraphy of the section is described. The strata penetrated by the Shell 410-1 well are more marine than rocks at the updip (landward) COST G-1, Exxon 975-1, COST G-2, and Conoco 145-1 well sites. Limestones and calcareous mudstones dominate at the Shell 410-1 site. Dolomite and anhydrite are much more abundant in the Bajocian-Callovian strata of the Shell 410-1 well, which is evidence that the carbonate-bank palaeoenvironments recorded in the Iroquois and Abenaki Formations were more restricted (less marine) here than 47 km to the west-northwest at the Mobil 312-1 well site near the edge of the Jurassic carbonate platform. -from Authors

Northeastern Geology and Environmental Sciences↗
USGS1951

Geology of the Humboldt region and the Iron King mine, Bigbug mining district, Yavapai County, Arizona

The Humboldt region is in central Yavapai County, Arizona. The intersection of the 112? 15' meridian and the 34? 30' N parallel is in the approximate geographical center of the region, and the Iron King mine is about 2000 feet west-northwest of the intersection. Pre-Cambrian rocks form the bedrock in the Humboldt region. Late Cenozoic unconsolidated river wash and valley fill, including some interbedded basalt, locally mantle the pre-Cambrian rocks, especially in the north-central part of the region (Lonesome Valley). The pre-Cambrian rocks consist of five newly defined metavolcanic formations derived from flows and tuff s, and of six intrusive units ranging in composition from granite to gabbro or perhaps more mafic types. Relic bedding-and pillow structures are locally prominent in the metavolcanics; geopetal structures are uncommon, but where present, generally indicate that the top is toward the west, though the evidence is too meager to be conclusive. Low-grade dynamothermal metamorphism altered the metavolcanics and to a lesser extent the intrusive rocks, forming textures, structures, and mineral assemblages characteristic of low temperature and moderate stress. The Texas Gulch formation, which is the easternmost metavolcanic formation, consists of five lithologic units. Arranged in the general order of their appearance from east to west they are meta-andesite breccia, purple slate, metarhyolite tuff, meta-andesite, and green slate. The boundary between the Texas Gulch formation and the Iron King meta-andesite is apparently gradational. The Iron King meta-andesite consists of three meta-andesite tuff units, two meta-andesite flow units and one metarhyolite tuff and conglomerate unit. The assemblage chlorite-albite-epitode with or without quartz is dominant in the meta-andesites. Mafic intrusive rocks, which may be approximately contemporaneous with metamorphism, may explain the presence of actinolitic hornblende in the central part of the formation. Toward the west the Iron King meta-andesite appears to grade into the Spud Mountain metabreccia through a zone containing beds characteristic of either one formation or the other. The Spud Mountain metabreccia consists of interbedded metabreccia and metatuff beds. The metatuffs are largely andesitic in composition, but a few thin beds of metarhyolite tuff occur. The fragments in the metabreccia beds consist chiefly or porphyritic meta-andesites and the matrix is meta-andesite tuff. Pre-Cambrian faults now marked by dikes separate the Chaparral Gulch metavolcanics, which lie west of the Spud Mountain metabreccia, from underlying and overlying formations. The Chaparral Gulch metavolcanics contain metarhyolite tuff, metarhyolite flow, and meta-andesite tuff that locally was contaminated by rhyolitic detritus. The Indian Hills metavolcanics, which are northeast of the Chaparral Gulch metavolcanics, consist of two broad units, one composed of metarhyolites and the other of meta-andesites. Metamorphosed tuffs and flows are believed to be represented in both units and flow breccia in the meta-andesites. Granite and alaskite; granodiorite and quartz diorite; diorite, mafic quartz diorite, gabbro and diabase; metarhyolite (?); and quartz porphyry comprise the pre-Cambrian intrusive units mapped. They include both deep-seated and hypabyssal types. Dynamothermal metamorphism has foliated the smaller bodies and the margins of the larger masses and partly converted them into mineral assemblages stable under low-grade metamorphic conditions. Planar structures (chiefly foliation) are omnipresent and linear structures are common in the pre-Cambrian meta-volcanic rocks. North-trending planar structures dominate in the Indian Hills metavolcanics, and in the Spud Mountain metabreccia, whereas northeast-trending planar structures are dominant in the Texas Gulch formation, Iron King meta-andesite, and Chaparral Gulch metavolcanics. To a lesser extent northeast-trending st

Open-File Report↗
USGS1984

Analytical results, geology, and sample locality map of mercury-sulfur-gypsum mineralization at Crater, Inyo County, California

The Crater mercury-su l fur-gypsum ~ineral ized area is located in east-central California along the crest of the Last Chance Range, west of the north end of Death Valley (fig. 1). The area is in the northwest quarter of the Last Chance Range 15-minute quadrangle and occupies the area between 117 39 and 117 45 longitude and 37 10 and 37 15 latitudP.. The area studied lies between 5000 ( 1525 m) and 6000 ( 1830 m) feet above sea level. Relief isgenerally moderate but can be extreme in some places, as at Hanging Rock Canyon (plate 1). The climate is arid, and there are no active streams in the area. The range fronts east and west of the area are precipitous and incised by many steep canyons, whereas the range crest has relatively low relief. The old abandoned town and mine site of Crater 1 ie in this area of low relief. Access to the Crater area is by paved and dirt roads from Big Pine to the west or from the north end of the Death Valley National Monument to the southeast.

California↗
USGS2013

Geologic map of the Lead Mountain 15’ quadrangle, San Bernardino County, California

The Lead Mountain 15’ quadrangle in the Mojave Desert contains a record of Jurassic, Cretaceous, Tertiary, and Quaternary magmatism. Small amounts of Mesoproterozoic(?) augen gneiss and Paleozoic and Mesozoic(?) metasedimentary rocks are preserved in small patches; they are intruded by voluminous Jurassic plutons of quartz diorite to granite composition and by Late Cretaceous granite of the Cadiz Valley batholith. Jurassic intrusive rocks include part of the Bullion Mountain Intrusive Suite and also younger dikes inferred to be part of the Jurassic Independence dike swarm. A contact-metamorphosed aureole 2 km wide in the Jurassic plutonic rocks fringes the Cadiz Valley batholith. Early Miocene dacitic magmatism produced a dense swarm of dikes in the eastern Bullion Mountains and the volcanic-intrusive remnant of a volcano at Lead Mountain. Tilting of the dike swarm from inferred vertical orientations may have resulted from Miocene tectonic extension. Conglomerate of Pliocene and (or) Miocene age is also tilted. Younger volcanism is recorded by Pliocene basalt of the Deadman Lake volcanic field, basalt of Lead Mountain (approximately 0.36 Ma), and the even younger basalt of Amboy. Quaternary sedimentation built alluvial fans and filled playas in the map area. Faulting in the dextral eastern California shear zone produced several northwest-striking faults in the quadrangle, some of them active into the Pleistocene and some that may have many kilometers of right-lateral offset.

California↗
USGS1997

Shallow subsurface geology of the continental shelf, Gulf of the Farallones, California, and its relationship to surficial seafloor characteristics

The Gulf of the Farallones is located on a continental margin that is tectonically active and has experienced eustatic fluctuations of sea level throughout the Quaternary. Bathymetry of the Gulf suggests that it is different from the average continental shelf off California in that instead of a seafloor that slopes gently seaward from the shoreline to the shelf edge (dominantly west to southwest), much of the Gulf shelf slopes to the northwest, a direction that is subparallel to that of the adjacent mainland shoreline. Isobaths are oblique to shore-normal for much of the Gulf shelf as opposed to the more typical shore-parallel isobaths. This northwest trend is parallel to that of the offshore granitic outcrops, the Farallon Island ridge and Cordell Bank. 3.5 kHz shallow subsurface profiles show a regional unconformity (basal unconformity of this study) that truncates bedrock and typically is overlain by a very thin veneer (1-2 m or less) of acoustically transparent unconsolidated sediment. In places, the basal unconformity appears to be coincident with the seafloor. Where the basal unconformity is within 1-2 m of the seafloor, side-scan sonar reveals that either bedrock pierces the seafloor or numerous linear depressions dissect the shelf seafloor. Side-scan sonar shows that the central part of the study area is characterized by numerous linear depressions that are on the order of 1-3 m deep, several meters to 5 km in length, and from 250 m to 2 km in width. The only Holocene unconsolidated sediment in excess of 1-2 m that has accumulated on the Gulf shelf is located where the bedrock surface is topographically depressed. The topographic lows are situated south of the Point Reyes headland and southwest of the Golden Gate. The sediment deposits that overlie these lows attain thicknesses up to 15-20 m; however, their average thickness is less than 10 m. Structure contours on the basal unconformity surface, essentially the top of the bedrock platform, also show that it is topographically high at its southern end and low at its northern end; the slope of the platform is therefore to the northwest. The seafloor mimics the attitude of the bedrock platform owing to the lack of appreciable sediment cover and hence also slopes northwest. This accounts for the oblique to shore-normal orientation of isobaths in the Gulf and the northwestward slope of the seafloor. The results of this investigation suggest that eustatic sea level fluctuations in conjunction with local tectonics had a profound effect on the deposition, erosion, and preservation of sediment on the Gulf shelf throughout the Quaternary and that the shallow subsurface greatly influences many aspects of the present surficial morphology.

Marine Geology↗
USGS2025

Colored shaded-relief bathymetry and acoustic backscatter of Lake Sammamish, Washington

Evidence of strong earthquakes (such as underwater landslides and associated deposits) may be recorded within the lacustrine sediments of Pacific Northwest lakes. The floor of Lake Sammamish, Wash., an approximately 11 kilometer (6.8 mile) long, 2 kilometer (1.2 mile) wide, and 35 meter (114.8 feet) deep lake located in a populated region just east of Seattle, was mapped by the U.S. Geological Survey in November of 2021 to search for evidence of past earthquakes. Mapping was conducted using a SWATHplus-M 234-kHz interferometric side-scan sonar system was pole-mounted on the U.S. Geological Survey research vessel Parke Snavely, and the system collected full-coverage bathymetric and acoustic backscatter data, which were processed to 2-meter spatial resolution. Two maps were created, a colored shaded-relief bathymetric map showing lake floor morphology (sheet 1), and an acoustic-backscatter map showing backscatter intensities (sheet 2). The results may then be utilized together to investigate past earthquake activity.

Washington↗
USGS2010

Changes in groundwater flow and volatile organic compound concentrations at the Fischer and Porter Superfund Site, Warminster Township, Bucks County, Pennsylvania, 1993-2009

The 38-acre Fischer and Porter Company Superfund Site is in Warminster Township, Bucks County, Pa. Historically, as part of the manufacturing process, trichloroethylene (TCE) degreasers were used for parts cleaning. In 1979, the Bucks County Health Department detected TCE and other volatile organic compounds (VOCs) in water from the Fischer and Porter on-site supply wells and nearby public-supply wells. The Fischer and Porter Site was designated as a Superfund Site and placed on the National Priorities List in September 1983. A 1984 Record of Decision for the site required the Fischer and Porter Company to pump and treat groundwater contaminated by VOCs from three on-site wells at a combined rate of 75 gallons per minute to contain groundwater contamination on the property. Additionally, the Record of Decision recognized the need for treatment of the water from two nearby privately owned supply wells operated by the Warminster Heights Home Ownership Association. In 2004, the Warminster Heights Home Ownership Association sold its water distribution system, and both wells were taken out of service. The report describes changes in groundwater levels and contaminant concentrations and migration caused by the shutdown of the Warminster Heights supply wells and presents a delineation of the off-site groundwater-contamination plume. The U.S. Geological Survey (USGS) conducted this study (2006-09) in cooperation with the U.S. Environmental Protection Agency (USEPA). The Fischer and Porter Site and surrounding area are underlain by sedimentary rocks of the Stockton Formation of Late Triassic age. The rocks are chiefly interbedded arkosic sandstone and siltstone. The Stockton aquifer system is comprised of a series of gently dipping lithologic units with different hydraulic properties. A three-dimensional lithostratigraphic model was developed for the site on the basis of rock cores and borehole geophysical logs. The model was simplified by combining individual lithologic units into generalized units representing upward fining sedimentary cycles capped by a siltstone bed. These cycles were labeled units 1 through 8 and are called stratigraphic units in this report. Groundwater in the unweathered zone mainly moves through a network of interconnecting secondary openings--bedding-plane fractures and joints. Groundwater generally is unconfined in the shallower part of the aquifer and confined or semiconfined in the deeper part of the aquifer. The migration of VOCs from the Fischer and Porter Site source area is influenced by geologic and hydrologic controls. The hydrologic controls have changed with time. Stratigraphic units 2 and 3 crop out beneath the former Fischer and Porter plant. VOCs originating at the plant source area entered these stratigraphic units and moved downdip to the northwest. When the wells at and in the vicinity of the site were initially sampled in 1979-80, three public-supply wells (BK-366, BK-367, MG-946) and three industrial-supply wells (BK-368, BK-370, and BK-371) were pumping. Groundwater contaminated with VOCs flowed downdip and then northeast along strike toward well BK-366, downdip toward well BK-368, and downdip and then west along strike toward well MG-946. The long axis of the TCE plume is oriented about N. 18° W. in the direction of dip. In 1979-80, the leading edge of the plume was about 3,500 feet wide. With the cessation of pumping of the supply wells in 2004, the size of the plume has decreased. In 2007-09, the plume was approximately 2,000 feet long and 2,000 feet wide at the leading edge. On the western side of the site, TCE and tetrachloroethylene (PCE) appear to be moving downdip though stratigraphic unit 3. The downdip extent of TCE and PCE migration extended approximately 550 feet off-site to the northwest and 750 feet off-site to the north. TCE concentrations in water samples from wells at the western site boundary increased from 1996 to 2007. On the northern side of the site, TCE and PCE appeared to be moving downward and laterally though stratigraphic units 2, 3, and 4. Groundwater-flow directions shifted to the northwest in the intermediate and deep zones after cessation of pumping of well BK-366 in 2004. The shutdown of the Warminster Heights wells had little effect on the direction of groundwater flow in the shallow zone. In 2007, TCE concentrations measured in water samples from the three remediation wells by the USGS ranged from less than 340 to 3,000 µg/L, and PCE concentrations ranged from less than 8.4 to 51 µg/L. TCE concentrations in water samples from the source-area remediation wells have decreased with time but remain highly variable. From 2001 to 2008, the TCE and PCE concentrations in water samples from wells BK-370 and BK-371 showed a linear decreasing trend. TCE and PCE concentrations in water samples from well BK-1324 showed an exponentially decreasing trend. In 2007, TCE concentrations measured in water samples from shallow wells ranged from less than 0.1 to 14,000 µg/L, and PCE concentrations ranged from less than 0.1 to 340 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the shallow zone. In 2007, TCE concentrations measured in water samples from on-site intermediate-depth monitor wells ranged from less than 0.1 to 500 µg/L, and PCE concentrations ranged from 1.3 to 28 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the intermediate zone and extended off-site to the north and northwest of the source area. Concentrations of TCE in water samples north and west of the source area increased from 1996 to 2007. In 2007, the TCE concentrations measured in water samples from on-site monitor wells in the deep zone ranged from 1.1 to 86 µg/L, and PCE concentrations ranged from less than 0.1 to 8.4 µg/L. The TCE and PCE plumes generally followed the hydraulic gradient in the deep zone and extended off-site to the northwest of the source area. In general, concentrations of TCE in water samples from monitor wells outside the source area increased between 1996 and 2005 and decreased between 2005 and 2007; concentrations were less in 2007 than in 1996.

Pennsylvania↗
USGS1988

Volcanology in Hawaii

Polynesians who first inhabited the Hawaiian Islands told in legend about Pele, Goddess of volcanic fires, who migrated from the Island of Kauai to Oahu, then to Maui, and finally to her present home in Kilauea Volcano's Halemaumau Crater on the Island of Hawaii. Geologists today accept this same relative age progressions for the evolution of the islands, demonstrating the kernels of geologic truth may lie in long-lived myths and legends. J.D. Dana, a geologist with a United states exploring expedition in the 1840's, was the first to write about the increase in age of the Hawaiian Islands to the northwest. He noted that weathering of the lavas, erosional destruction of the islands by waves and streams and the growth of reeds around the islands progressively increased away from the Island of Hawaii. He correctly established the islands' relative ages, but absolute ages had to wait for over 120 years until radioactive age-dating techniques became available.

Hawaii↗
USGS1969

Geologic structure between the Murray fracture zone and the Transverse Ranges

The Murray fracture has been thought to extend ashore into the Transverse Ranges of California, but a geophysical study shows no evidence of structural continuity between these features. Instead, basement morphology typical of the Murray fracture zone ends where its known magnetic and bathymetric expression dies out. Similarly, east-west Transverse Range structures change direction so that they are parallel to the northwest trend of the coast rather than crossing the continental shelf and slope. The lack of continuity suggests an independent development of the Transverse Ranges since at least mid-Tertiary time along an older structural trend continuous with the Murray fracture zone. Possibly a fundamental lineament in the crust, an extension of the Murray, inactive since at least the mid-Tertiary, provided a convenient trend for development of the Transverse Ranges in response to deformation along the San Andreas fault system. The Murray fracture zone is thought by some authors to be a transform-fault. The transform-fault hypothesis alleviates some difficulties that arise in explaining the origin of the zone by transcurrent faulting but equivalent uncertainties seem to accompany the newer explanation.

Marine Geology↗
USGS2015

Qualitative assessment of selected areas of the world for undiscovered sediment-hosted stratabound copper deposits: Chapter Y in Global mineral resource assessment

A qualitative mineral resource assessment of sediment-hosted stratabound copper mineralized areas for undiscovered copper deposits was performed for 10 selected areas of the world. The areas, in alphabetical order, are (1) Belt-Purcell Basin, United States and Canada; (2) Benguela and Cuanza Basins, Angola; (3) Chuxiong Basin, China; (4) Dongchuan Group rocks, China; (5) Egypt–Israel–Jordan Rift, Egypt, Israel, and Jordan; (6) Maritimes Basin, Canada; (7) Neuquén Basin, Argentina; (8) Northwest Botswana Rift, Botswana and Namibia; (9) Redstone Copperbelt, Canada; and (10) Salta Rift System, Argentina. This assessment (1) outlines the main characteristics of the areas, (2) classifies known deposits by deposit model subtypes, and (3) ranks the areas according to their potential to contain undiscovered copper deposits. An analytic hierarchy process (AHP) was used to rank assessment areas according to their potential for undiscovered copper deposits. Once the main characteristics of each area were compiled (age of host rock, geologic setting, stratigraphy, host lithology, deposit subtype(s), known deposits and occurrences, and mineral system components), three criteria (mineralization, extent of study area, and lithostratigraphic framework, each with multiple subcriteria) were scored for all assessment areas. Relative weights and scores were assigned to all criteria by three geologists. In addition, the assessment areas were ranked for comparison exclusively on the basis of professional opinion. The AHP and professional opinion lists are similar but not the same. Both the professional opinion and the cumulative AHP lists rate the Northwest Botswana Rift in Botswana and Namibia as the area most likely to contain the most undiscovered copper deposits. The Salta Rift System in Argentina is rated lowest among the 10 qualitatively assessed areas.

Belt-Purcell Basin, Benguela Basin, Cuanza Basin, ↗
USGS2023

Predicting probabilities of late summer surface flow presence in a glaciated mountainous headwater region

Accurate mapping of streams that maintain surface flow during annual baseflow periods in mountain headwater streams is important for informing water availability for human consumption and is a fundamental determinant of in-channel conditions for stream-dwelling organisms. Yet accurate mapping that captures local spatial variability and associated local controls on surface flow presence is limited. An empirical random-forest model was developed to predict streamflow permanence (late summer surface-flow presence) for Mount Rainier National Park and the surrounding mountainous area in western Washington, USA. This model was developed to improve upon the existing multi-state, regional-scale probability of stream permanence developed for the greater Pacific Northwest Region (PROSPER PNW ). The model was trained on 544 wet/dry observations collected during the late summer, baseflow period from 2018 to 2020 using the crowd-source mobile application, FLOwPER. Final model accuracy was 0.74 with drainage area and covariates describing geology, topography, and land cover as top predictors of streamflow permanence compared to coarser resolution climatic covariates. The prevalence of static covariates over climatic covariates as top ranked important covariates highlights the importance of scale when evaluating controls on streamflow permanence. Cross validation of the model indicates that streamflow permanence probabilities from this model is an improvement over the regional-scale PROSPER PNW model demonstrating the utility of relatively simple, crowd-sourced data to address water resource needs, and that determination of important predictors of streamflow permanence is influenced by the spatial and temporal resolution of analysis.

Washington↗
USGS2014

Plenary: Progress in Regional Landslide Hazard Assessment—Examples from the USA

Landslide hazard assessment at local and regional scales contributes to mitigation of landslides in developing and densely populated areas by providing information for (1) land development and redevelopment plans and regulations, (2) emergency preparedness plans, and (3) economic analysis to (a) set priorities for engineered mitigation projects and (b) define areas of similar levels of hazard for insurance purposes. US Geological Survey (USGS) research on landslide hazard assessment has explored a range of methods that can be used to estimate temporal and spatial landslide potential and probability for various scales and purposes. Cases taken primarily from our work in the U.S. Pacific Northwest illustrate and compare a sampling of methods, approaches, and progress. For example, landform mapping using high-resolution topographic data resulted in identification of about four times more landslides in Seattle, Washington, than previous efforts using aerial photography. Susceptibility classes based on the landforms captured 93 % of all historical landslides (all types) throughout the city. A deterministic model for rainfall infiltration and shallow landslide initiation, TRIGRS, was able to identify locations of 92 % of historical shallow landslides in southwest Seattle. The potentially unstable areas identified by TRIGRS occupied only 26 % of the slope areas steeper than 20°. Addition of an unsaturated infiltration model to TRIGRS expands the applicability of the model to areas of highly permeable soils. Replacement of the single cell, 1D factor of safety with a simple 3D method of columns improves accuracy of factor of safety predictions for both saturated and unsaturated infiltration models. A 3D deterministic model for large, deep landslides, SCOOPS, combined with a three-dimensional model for groundwater flow, successfully predicted instability in steep areas of permeable outwash sand and topographic reentrants. These locations are consistent with locations of large, deep, historically active landslides. For an area in Seattle, a composite of the three maps illustrates how maps produced by different approaches might be combined to assess overall landslide potential. Examples from Oregon, USA, illustrate how landform mapping and deterministic analysis for shallow landslide potential have been adapted into standardized methods for efficiently producing detailed landslide inventory and shallow landslide susceptibility maps that have consistent content and format statewide.

Conference Paper↗
USGS2022

Late Paleozoic flexural extension and overprinting shortening in the southern Ozark dome, Arkansas, USA: Evolving fault kinematics in the foreland of the Ouachita orogen

Faults and folds on the southern flank of the Ozark dome in northern Arkansas, USA, record flexural extension in a foreland area followed by shortening in response to the late Paleozoic Ouachita orogeny. Map-scale structures and an analysis of fault-slip data collected systematically during geologic mapping demonstrate that most deformation in the area accommodated north-south extension as the southern margin of Laurentia was flexed beneath the thrust load of the Ouachita belt, probably during Middle Pennsylvanian. Extension was concentrated in northeast- and west-northwest-trending structural zones having sets of discontinuous, often en echelon normal and strike-slip faults and associated monoclinal folds. Reactivation of basement weaknesses that underlie these zones is indicated by their close match to oblique-rift models in which both the proportions of normal and strike-slip faulting and the internal extension directions vary with orientation of the zones. Subsequent propagation of north-south Ouachita shortening into the foreland formed small-offset strike-slip and sparse reverse faults that overprinted older extensional structures. Strike-slip faults were concentrated in reactivated northeast-trending structural zones. In two areas, reverse faults and local anticlines were developed in the footwalls of older normal faults, both near intersections of northeast- and west-northwest-trending structural zones. These are interpreted as areas of incipient inversion due to compressional stress concentrations at fault-block corners. Spatial overlap of areas of north-south shortening and fluid flux marked by silicification or lead-zinc mineralization indicates that regional fluid flow of brines was coeval with and may have enhanced inversion during Late Pennsylvanian to early Permian.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS1998

40Ar/39Ar age of the Manson impact structure, Iowa, and correlative impact ejecta in the Crow Creek member of the Pierre Shale (Upper Cretaceous), South Dakota and Nebraska

A set of 34 laser total-fusion 40 Ar/ 39 Ar analyses of sanidine from a melt layer in crater-fill deposits of the Manson impact structure in Iowa has a weighted-mean age of 74.1 ± 0.1 Ma. This age is about 9.0 m.y. older than 40 Ar/ 39 Ar ages of shocked microcline from the Manson impact structure reported previously by others. The 74.1 Ma age of the sanidine, which is a melt product of Precambrian microcline clasts, indicates that the Manson impact structure played no part in the Cretaceous-Tertiary (K-T) mass extinction at 64.5 Ma. Moreover, incremental-heating 40 Ar/ 39 Ar ages of the sanidine show that it is essentially free of excess 40 Ar and has not been influenced by postcrystallization heating or alteration. An age spectrum of the matrix of the melt layer shows effects of 39 Ar recoil, including older ages in the low-temperature increments and younger ages in the high-temperature increments. At 17 places in eastern South Dakota and Nebraska, shocked quartz and feldspar grains are concentrated in the lower part of the Crow Creek Member of the Pierre Shale (Upper Cretaceous). The grains are largest (3.2 mm) in southeastern South Dakota and decrease in size (0.45 mm) to the northwest, consistent with the idea that the Manson impact structure was their source. The ubiquitous presence of shocked grains concentrated in a thin calcarenite at the base of the Crow Creek Member suggests it is an event bed recording an instant of geologic time. Ammonites below and above the Crow Creek Member limit its age to the zone of Didymoceras nebrascense of earliest late Campanian age. Plagioclase from a bentonite bed in this zone in Colorado has a 40 Ar/ 39 Ar age of 74.1 ± 0.1 Ma commensurate with our sanidine age of 74.1 Ma for the Manson impact structure. 40 Ar/ 39 Ar ages of bentonite beds below and above the Crow Creek are consistent with our 74.1 ± 0.1 Ma age for the Manson impact structure and limit its age to the interval ±74.5 0.1 to 73.8 ± 0.1 Ma. Recently, two origins for the Crow Creek have been proposed—eastward transgression of the Late Cretaceous sea and a Manson impact-triggered tsunami. We conclude that most data are in accord with an impact origin for the Crow Creek Member and are at odds with the marine transgression hypothesis.

Iowa, Nebraska, South Dakota↗
USGS2003

Geology of the continental margin beneath Santa Monica Bay, Southern California, from seismic-reflection data

We interpret seismic-reflection data, which were collected in Santa Monica Bay using a 70-in3 generator-injector air gun, to show the geologic structure of the continental shelf and slope and of the deep-water, Santa Monica and San Pedro Basins. The goal of this research is to investigate the earthquake hazard posed to urban areas by offshore faults. These data reveal that northwest of the Palos Verdes Peninsula, the Palos Verdes Fault neither offsets the seafloor nor cuts through an undeformed sediment apron that postdates the last sea level rise. Other evidence indicates that this fault extends northwest beneath the shelf in the deep subsurface. However, other major faults in the study area, such as the Dume and San Pedro Basin Faults, were active recently, as indicated by an arched seafloor and offset shallow sediment. Rocks under the lower continental slope are deformed to differing degrees on opposite sides of Santa Monica Canyon. Northwest of this canyon, the continental slope is underlain by a little-deformed sediment apron; the main structures that deform this apron are two lower-slope anticlines that extend toward Point Dume and are cored by faults showing reverse or thrust separation. Southeast of Santa Monica Canyon, lower-slope rocks are deformed by a complex arrangement of strike-slip, normal, and reverse faults. The San Pedro Escarpment rises abruptly along the southeast side of Santa Monica Canyon. Reverse faults and folds underpinning this escarpment steepen progressively southeastward. Locally they form flower structures and cut downward into basement rocks. These faults merge downward with the San Pedro Basin fault zone, which is nearly vertical and strike slip. The escarpment and its attendant structures diverge from this strike-slip fault zone and extend for 60 km along the margin, separating the continental shelf from the deep-water basins. The deep-water Santa Monica Basin has large extent but is filled with only a thin (less than 1.5-km) section of what are probably post-Miocene rocks and sediment. Extrapolating ages obtained from Ocean Drilling Program site 1015 indicates that this sedimentary cover is Quaternary, possibly no older than 600 ka. Folds and faults along the base of the San Pedro Escarpment began to form during 8-13 ka ago. Refraction-velocity data show that high-velocity rocks, probably the Catalina Schist or Miocene volcanic rocks, underlie the sedimentary section. The San Pedro Basin developed along a strike-slip fault, widens to the southeast, and is deformed by faults having apparent reverse separation and by folds near Redondo Canyon and the Palos Verdes Peninsula.

California↗
USGS2019

Yellowstone Volcano Observatory 2017 annual report

The Yellowstone Volcano Observatory (YVO) monitors volcanic and hydrothermal activity associated with the Yellowstone magmatic system, conducts research into magmatic processes occurring beneath Yellowstone Caldera, and issues timely warnings and guidance related to potential future geologic hazards. This report summarizes the activities and findings of YVO during the year 2017, focusing on the Yellowstone magmatic system. The most noteworthy event of the year was the Maple Creek earthquake swarm of June–September, about 15 kilometers north-northwest of West Yellowstone, Montana. Over 2,400 earthquakes were located, including a felt magnitude 4.4 earthquake on June 15. Deformation was mostly consistent throughout the year, with uplift of the Norris Geyser Basin area and subsidence of the caldera, both at rates of a few centimeters per year. The only significant interruption in this pattern was an ~2-week period of subsidence at Norris Geyser Basin in early December, after which deformation returned to uplift. Field work in 2017, conducted under research permits granted by the National Park Service, included routine maintenance visits to seismic and geodetic stations as well as deployment of a semipermanent Global Positioning System network during the summer months, installation of Multi-GAS and eddy covariance systems for tracking gas emissions at the Solfatara Plateau thermal area, deployment of a nodal seismic array in Upper Geyser Basin, and collection of gas and water samples from Boundary Creek on the western side of Yellowstone National Park.

Wyoming↗
USGS1978

Landsat investigations of the northern Paradox basin, Utah and Colorado: Implications for radioactive waste emplacement Part 1. Lineaments and alignments

The first stages of a remote-sensing project on the Paradox basin, part of the USGS (U.S. Geological Survey) radioactive waste-emplacement program, consisted of a review and selection of the best available satellite scanner images to use in geomorphologic and tectonic investigations of the region. High-quality Landsat images in several spectral bands (E-2260-17124 and E-5165-17030), taken under low sun angle October 9 and 10, 1975, were processed via computer for planimetric rectification, histogram analysis, linear transformation of radiance values, and edge enhancement. A lineament map of the northern Paradox basin was subsequently compiled at 1:400,000 using the enhanced Landsat base. Numerous previously unmapped northeast-trending lineaments between the Green River and Yellowcat dome; confirmatory detail on the structural control of major segments of the Colorado, Gunnison, and Dolores Rivers; and new evidence for late Phanerozoic reactivation of Precambrian basement structures are among the new contributions to the tectonics of the region. Lineament trends appear to be compatible with the postulated Colorado lineament zone, with geophysical potential-field anomalies, and with a northeast-trending basement fault pattern. Combined Landsat, geologic, and geophysical field evidence for this interpretation includes the sinuousity of the composite Salt Valley anticline, the transection of the Moab-Spanish Valley anticline on its southeastern end by northeast-striking faults, and possible transection (?) of the Moab diapir. Similarly, northeast-trending lineaments in Cottonwood Canyon and elsewhere are interpreted as manifestations of structures associated with northeasterly trends in the magnetic and gravity fields of the La Sal Mountains region. Other long northwesterly lineaments near the western termination of the Ryan Creek fault zone. may be associated with the fault zone separating the Uncompahgre horst uplift from the Paradox basin. Implications of the present investigation for a potential radioactive waste-emplacement site in Salt Valley include confirmation of lack of permanent surface drainage and absence of agricultural or other development in the area of northern Salt Valley. On the other hand, the existence of diapirism, salt-karst landforms, and extensive lineamentation of the northern Paradox basin suggest regional tectonic instability at least in the geologic past. Future reactivation of diapiric or other halokinetic processes, including lateral flow, would lead to plastic behavior of the halite that might cause emplaced waste containers to migrate within the diapir. At Salt Valley, existing diapiric boundary faults and intersecting joint sets in sandstone units on the anticlinal flanks could, if the hydraulic gradient is suitable, provide conduits to the halite core for circulating ground water from adjacent Mesozoic sandstones in synclinal areas between the salt diapirs. Moreover, the loci of major lineament intersections might be areas of somewhat elevated seismic risk. If the salt barrier of Salt Valley anticline should fail in the future, potentially water-bearing Mesozoic fissile shales and friable to quartizitic sandstones would be the ultimate repository of the emplaced radioactive waste.

Colorado, Utah↗