SEARCH · Geology Reports

Results for “Issue Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

USGS1999

Spatial strategies for managing visitor impacts in National Parks

Resource and social impacts caused by recreationists and tourists have become a management concern in national parks and equivalent protected areas. The need to contain visitor impacts within acceptable limits has prompted park and protected area managers to implement a wide variety of strategies and actions, many of which are spatial in nature. This paper classifies and illustrates the basic spatial strategies for managing visitor impacts in parks and protected areas. A typology of four spatial strategies was proposed based on the recreation and park management literature. Spatial segregation is a common strategy for shielding sensitive resources from visitor impacts or for separating potentially conflicting types of use. Two forms of spatial segregation are zoning and closure. A spatial containment strategy is intended to minimize the aggregate extent of visitor impacts by confining use to limited designated or established Iocations. In contrast, a spatial dispersal strategy seeks to spread visitor use, reducing the frequency of use to levels that avoid or minimize permanent resource impacts or visitor crowding and conflict. Finally, a spatial configuration strategy minimizes impacting visitor behavior though the judicious spatial arrangement of facilities. These four spatial strategics can be implemented separately or in combination at varying spatial scales within a single park. A survey of national park managers provides an empirical example of the diversity of implemented spatial strategies in managing visitor impacts. Spatial segregation is frequently applied in the form of camping restrictions or closures to protect sensitive natural or cultural resources and to separate incompatible visitor activities. Spatial containment is the most widely applied strategy for minimizing the areal extent of resource impacts. Spatial dispersal is commonly applied to reduce visitor crowding or conflicts in popular destination areas but is less frequently applied or effective in minimizing resource impacts. Spatial configuration was only minimally evaluated, as it was not included in the survey. The proposed typology of spatial strategies offers a useful means of organizing and understanding the wide variety of management strategies and actions applied in managing visitor impacts in parks and protected areas. Examples from U.S. national parks demonstrate the diversity of these basic strategies and their flexibility in implementation at various spatial scales. Documentation of these examples helps illustrate their application and inform managers of the multitude of options. Further analysis from the spatial perspective is needed Io extend the applicability of this typology to other recreational activities and management issues.

Journal of Park and Recreation Administration↗

USGS1997

Some thoughts on problems associated with various sampling media used for environmental monitoring

Modern analytical instrumentation is capable of measuring a variety of trace elements at concentrations down into the single or double digit parts-per-trillion (ng l-1) range. This holds for the three most common sample media currently used in environmental monitoring programs: filtered water, whole-water and separated suspended sediment. Unfortunately, current analytical capabilities have exceeded the current capacity to collect both uncontaminated and representative environmental samples. The success of any trace element monitoring program requires that this issue be both understood and addressed. The environmental monitoring of trace elements requires the collection of calendar- and event-based dissolved and suspended sediment samples. There are unique problems associated with the collection and chemical analyses of both types of sample media. Over the past 10 years, reported ambient dissolved trace element concentrations have declined. Generally, these decreases do not reflect better water quality, but rather improvements in the procedures used to collect, process, preserve and analyze these samples without contaminating them during these steps. Further, recent studies have shown that the currently accepted operational definition of dissolved constituents (material passing a 0.45 ??m membrane filter) is inadequat owing to sampling and processing artifacts. The existence of these artifacts raises questions about the generation of accurate, precise and comparable 'dissolved' trace element data. Suspended sediment and associated trace elements can display marked short- and long-term spatial and temporal variability. This implies that spatially representative samples only can be obtained by generating composites using depth- and width-integrated sampling techniques. Additionally, temporal variations have led to the view that the determination of annual trace element fluxes may require nearly constant (e.g., high-frequency) sampling and subsequent chemical analyses. Ultimately, sampling frequency for flux estimates becomes dependent on the time period of concern (daily, weekly, monthly, yearly) and the amount of acceptable error associated with these estimates.

Conference Paper↗

USGS2022

Zoning Verification in Mexico City Using Strong Motions of the M7.1 Puebla-Morelos Earthquake of September 19, 2017

Mexico City suffers extensive damage from large earthquakes that originate at far distances due mainly to densely built areas on a filled lakebed. Seismic design codes in Mexico recognize the site-specific issues in Mexico City by acknowledging zones that represent lakebed as being riskier compared to other Mexico City areas. At the time of the 19 September 1985 M8.1 Michoacán Earthquake, (a) the seismic zoning map comprised only three zones (Hills [now Zone I], Transition [now Zone II] and Lake Zone [now Zone III] and (b) a limited number of permanent strong motion stations (~6) existed. Since, 1985 the seismic zonation maps have evolved: (a) the Lake Zone (now Zone III) into 4 sub-zones (a, b, c and d) and (b) the number of strong motion stations has increased significantly (~25) and recorded the 19 September 2017 M7.1 Puebla-Morelos earthquake. To identify the site frequency [f] (period [T]) at the specific location of a strong motion station within a particular zone or sub-zone (Zone I, II and III a,b,c,d), two well-known methods (H/H and H/V) for determining spectral ratios are employed using these records. The predominant site periods identified by both methods are in good agreement with those interpolated from the zoning-site period maps of Mexico City in the 2004 Seismic Design Code. Such verification is a testament to the benefits of improved zoning and greater distribution of strong motion network stations, and sets a good example for applications in other seismic regions.

Mexico City↗

USGS2004

Brown bear response to elevated viewing structures at Brooks River, Alaska

The increasing popularity of brown bear (Ursus arctos) viewing at Brooks River in Katmai National Park, Alaska has resulted in overcrowded facilities, increasing bear-human conflicts, displacement of bears from important habitats, and degradation of cultural resources. To partially address these issues, the National Park Service (NPS) constructed a 300-m-long elevated boardwalk with interconnected viewing platforms in August 2000. To determine what effects the new structures might have on individual bears, we observed bear movements and behaviors before and after construction. We used direct observations and motion-detection cameras to construct temporal-spatial profiles of bear activity. Although bear numbers were similar (59 bears in 2000 and 56 bears in 2001) and bear activity within the greater Brooks River area did not differ (P = 0.62, n = 29) between the 2 years of this study, trail crossings in the vicinity of the new structures decreased 78% (7,436 crossings in 2000 and 1,646 crossings in 2001; ??2 = 762, df = 14, P < 0.001). Bear temporal use of the boardwalk area changed such that when human use was highest, bear use was proportionally lower in the post- versus pre-construction phase (??2 = 34, df = 3, P < 0.005). Of 123 direct observations of bears approaching to pass beneath the structures, only 19.5% rerouted or avoided crossing under the structures. Bears' responses to the new structures were influenced by the behavior of visitors upon the structures. Potential management tools to minimize impacts of these structures on bears include enhanced public education regarding visitor conduct on the boardwalk, as well as visitor management and monitoring.

Conference Paper↗

USGS2014

Postglacial eruptive history, geochemistry, and recent seismicity of Aniakchak volcano, Alaska Peninsula

Aniakchak is a Pleistocene to Holocene composite volcano of the Alaska–Aleutian arc that suffered at least one caldera-forming eruption in postglacial time and last erupted in 1931. The oldest recognized postglacial eruption, Aniakchak I, produced andesite ignimbrite ca. 9,500–7,500 14 C yr B.P. Subsequently, a vent northeast of the summit issued dacite–rhyodacite magma ca. 7,000 14 C yr B.P. mainly as the Black Nose Pumice falls. The ca. 3,430 14 C yr B.P. Aniakchak II eruption produced rhyodacite plinian fall followed by rhyodacite and andesite ignimbrite extending ≥50 km to the Bering Sea and Pacific coasts and resulted in collapse of the 10-km-diameter caldera. Postcaldera vents are mainly on the caldera ring-fracture system. The earliest extruded small dacite domes into a deep caldera lake and a lava flow on the northwest flank. Three basaltic andesite–andesite tuff cones were constructed on the eastern caldera floor after catastrophic draining of the lake by ~200 m. Dacite–andesite magmas issued from Vent Mountain and Half Cone starting as early as ~1,000 years ago. Plinian eruption at Half Cone ~400 14 C yr B.P. yielded widespread dacite Pink and overlying andesite Brown Pumice fall deposits. Strombolian eruption of basaltic andesite built Blocky Cone after Half Cone and most Vent Mountain activity. The most recent eruption, in 1931, yielded dacite–rhyodacite tephra followed by relatively voluminous andesite tephra and ended with minor basaltic andesite. Current indications of an active magmatic system include high 3 He/ 4 He of CO 2 -rich gas at intracaldera Surprise Lake, InSAR pattern of caldera floor subsidence, and episodic seismicity. The majority of earthquakes are long-period (LP) events. Epicenters for 135 (2009–2012; M L ≤2.1) define a bow-tie pattern elongated parallel to plate convergence. Hypocenters identify events14–28 km below sea level (bsl), few events 7–14 km bsl beneath the caldera, and events <10 km bsl concentrated under Vent Mountain. Recent seismicity is consistent with long-lived mush in the quiet zone, from which magma escapes to be stored ephemerally to within ~2.5 km bsl. Future volcanic activity of Aniakchak could include hydromagmatic explosions, possibly followed by effusion or strombolian eruption of basaltic andesite to Plinian eruption of dacite. Another voluminous eruption, such as Aniakchak II, is considered unlikely in the near future.

Alaska↗

USGS2017

Niobium and tantalum

Niobium and tantalum are transition metals that are almost always found together in nature because they have very similar physical and chemical properties. Their properties of hardness, conductivity, and resistance to corrosion largely determine their primary uses today. The leading use of niobium (about 75 percent) is in the production of high-strength steel alloys used in pipelines, transportation infrastructure, and structural applications. Electronic capacitors are the leading use of tantalum for high-end applications, including cell phones, computer hard drives, and such implantable medical devices as pacemakers. Niobium and tantalum are considered critical and strategic metals based on the potential risks to their supply (because current production is restricted to only a few countries) and the significant effects that a restriction in supply would have on the defense, energy, high-tech industrial, and medical sectors. The average abundance of niobium and tantalum in bulk continental crust is relatively low—8.0 parts per million (ppm) niobium and 0.7 ppm tantalum. Their chemical characteristics, such as small ionic size and high electronic field strength, significantly reduce the potential for these elements to substitute for more common elements in rock-forming minerals and make niobium and tantalum essentially immobile in most aqueous solutions. Niobium and tantalum do not occur naturally as pure metals but are concentrated in a variety of relatively rare oxide and hydroxide minerals, as well as in a few rare silicate minerals. Niobium is primarily derived from the complex oxide minerals of the pyrochlore group ((Na,Ca,Ce) 2 (Nb,Ti,Ta) 2 (O,OH,F) 7 ), which are found in some alkaline granite-syenite complexes (that is, igneous rocks containing sodium- or potassium-rich minerals and little or no quartz) and carbonatites (that is, igneous rocks that are more than 50 percent composed of primary carbonate minerals, by volume). Tantalum is derived mostly from the mineral tantalite ((Fe,Mn)(Ta,Nb) 2 O 6 ), which is found as an accessory mineral in rare-metal granites and pegmatites that are also enriched in lithium and cesium (termed lithium-cesium-tantalum (LCT)-type pegmatites). Brazil and Canada are the leading nations that produce niobium mineral concentrates, but Brazil is by far the leading producer, accounting for about 90 percent of production, which comes mostly from weathered material derived from carbonatites. Brazil and Canada also have the largest identified niobium resources; additional resources, although they are less well reported, occur in Angola, Australia, China, Greenland, Malawi, Russia, and South Africa. Australia and Brazil have been the leading producers of tantalum mineral concentrates, although recently Ethiopia and Mozambique have also been significant suppliers of tantalum. Artisanal mining of columbite-tantalite (also called coltan) is practiced in many countries, particularly Burundi, the Democratic Republic of the Congo (Congo [Kinshasa]), Nigeria, Rwanda, and Uganda. Brazil has about 40 percent of the identified tantalum resources; other countries and regions with identified tantalum resources include, in decreasing order of resources, Australia, Asia, Russia and the Middle East, Africa, North America, and Europe. Identified niobium and tantalum resources in the United States are small, low grade, and difficult to recover and process, and are thus not commercially recoverable at current prices. Consequently, the United States meets its current and expected future needs for niobium and tantalum through imports of primary mineral concentrates and alloys and through recovery from foreign and domestic alloy scrap that contain the metals. Environmentally, the main issues related to niobium and tantalum mining are land disruptions, the volume of waste materials and their disposal, and the radioactivity of some tailings and waste materials that contain thorium and uranium. Because of the relative biological inertness of niobium and tantalum, human and ecological health concerns are generally minimal under most natural conditions. Demand for both niobium and tantalum is expected to increase as the world economy continues to recover from the downturn that began in 2008. Increased demand for niobium is linked to increased consumption of microalloyed steel, which is used in the manufacture of cars, buildings, ships, and refinery equipment. Demand for these steels will likely increase with continued economic development in such countries as Brazil, China, and India. In addition, increased global demand for cars, cell phones, computers, superconducting magnets, and other high-tech devices will likely spur increased demand for both niobium and tantalum. The estimated global reserves and resources of niobium and tantalum are large and appear more than sufficient to meet global demand for the foreseeable future, possibly the next 500 years. The sale of “conflict coltan” attributed to rebel forces waging a civil war in Congo (Kinshasa) has been of recent concern and has highlighted the need for a transparent and traceable global supply chain that can exclude illegal columbite-tantalite from the conventional market while discerning legitimate artisanal mine production in central Africa.

Professional Paper↗

USGS1978

Summary appraisals of the Nation's ground-water resources; Alaska

Alaska has enormous surface-water resources, but many of the streams are frozen for most of the year and most contain glacial silt that makes them unacceptable for human use. These factors lend special significance to ground water as a water-supply source, even though perennially frozen ground (permafrost) profoundly modifies ground-water flow systems in much of Alaska north of the maritime southern coast and southeastern panhandle areas. Frozen ground is a virtually impermeable layer that restricts recharge, discharge, and movement of ground water, acts as a confining layer and limits the volume of unconsolidated deposits and bedrock in which water may be stored. Ground water is an untested resource in most of Alaska, but in many areas potential development of ground water far exceeds current use. Alluvium of major river valleys, such as the Yukon, Tanana, Kuskokwim and Susitna Rivers, probably contains the most extensive aquifers in the State. Large amounts of ground water are also stored in glacial outwash aquifers that underlie coastal basins and valleys, such as those at Kenai and Anchorage in the Cook Inlet lowland. Individual wells yielding more than 1,000 gallons per minute have been developed in the Tanana River valley, Cook Inlet lowland, and the coastal valleys at Seward and Juneau. Comparable yields should be possible in other areas that have similar geohydrologic environments. No major aquifers have been identified in glacial and glaciolacustrine deposits of interior valleys or in deltaic deposits. Major bedrock aquifers have been identified only in carbonate rocks of the Brooks Range and on the north side of the Alaska Range. Springs issuing from the carbonate rocks of the Brooks Range have discharges as great as 16,000 gallons per minute. Most ground-water recharge occurs beneath reaches of stream channels that are losing flow to the ground-water system. Most ground-water discharge also takes place along reaches of stream channels. This discharge augments streamflows during summer and maintains low flows during winter when there is no surface-water runoff. On the basis of a streamflow hydrograph separation technique and using the 60 percent flow-duration value as an indicator of ground-water discharge, it is estimated that 25 percent of the total volume of streamflow in Alaska (exclusive of coastal, maritime environments) is contributed by ground-water discharge. The thawing of frozen ground in the permafrost regions of Alaska causes construction and engineering problems. Disturbance of the ground surface disrupts the natural thermal equilibrium and tends to thaw part of the permafrost. Thawing can cause loss of strength, a decrease in volume, and an increase in erosion potential, particularly if the frozen ground is fine grained and poorly drained. Present deficiencies in the ground-water information base are obvious limiting factors to ground-water development in Alaska. There is a need to extend the ground-water data-collection network and to pursue special research into the quantitative aspects of ground-water hydrology in cold regions, particularly the continuous permafrost zone.

Alaska↗

USGS2010

Using airborne geophysical surveys to improve groundwater resource management models

Increasingly, groundwater management requires more accurate hydrogeologic frameworks for groundwater models. These complex issues have created the demand for innovative approaches to data collection. In complicated terrains, groundwater modelers benefit from continuous high‐resolution geologic maps and their related hydrogeologic‐parameter estimates. The USGS and its partners have collaborated to use airborne geophysical surveys for near‐continuous coverage of areas of the North Platte River valley in western Nebraska. The survey objectives were to map the aquifers and bedrock topography of the area to help improve the understanding of groundwater‐surface‐water relationships, leading to improved water management decisions. Frequency‐domain heliborne electromagnetic surveys were completed, using a unique survey design to collect resistivity data that can be related to lithologic information to refine groundwater model inputs. To render the geophysical data useful to multidimensional groundwater models, numerical inversion is necessary to convert the measured data into a depth‐dependent subsurface resistivity model. This inverted model, in conjunction with sensitivity analysis, geological ground truth (boreholes and surface geology maps), and geological interpretation, is used to characterize hydrogeologic features. Interpreted two‐ and three‐dimensional data coverage provides the groundwater modeler with a high‐resolution hydrogeologic framework and a quantitative estimate of framework uncertainty. This method of creating hydrogeologic frameworks improved the understanding of flow path orientation by redefining the location of the paleochannels and associated bedrock highs. The improved models reflect actual hydrogeology at a level of accuracy not achievable using previous data sets.

Conference Paper↗

USGS2012

Conflicts between sandhill cranes and farmers in the western United States: evolving issues and solutions

The main conflicts between Sandhill Cranes (Grus canadensis) and farmers in western United States occur in the Rocky Mountain region during migration and wintering periods. Most crop damage by cranes occurs in mature wheat (Triticum aestivum) and barley (Hordeum vulgare), young shoots of alfalfa (Medicago sativa) and cereal grains, chilies (Capsicum annuum), and silage corn (Zea mays). Damage is related to proximity of crop fields to roost sites and timing of crane concentrations relative to crop maturity or vulnerability. The evolution of conflicts between farmers and cranes and current solutions are described for two areas of the Rocky Mountains used by staging, migrating, or wintering cranes: Grays Lake, Idaho, and the Middle Rio Grande Valley, New Mexico. In both areas, conflicts with growing crane populations were aggravated by losses of wetlands and cropland, proximity of crops to roosts and other wetland areas, changing crop types and practices, and increasing urbanization. At Grays Lake, fall-staging cranes damaged barley fields near an important breeding refuge as well as fields 15-50 km away. In the Middle Rio Grande Valley, migrating and wintering cranes damaged young alfalfa fields, chilies, and silage corn. Solutions in both areas have been addressed through cooperative efforts among federal and state agencies, that manage wetlands and croplands to increase food availability and carrying capacity on public lands, provide hazing programs for private landowners, and strategically target crane hunting to problem areas. Sustaining the success of these programs will be challenging. Areas important to Sandhill Cranes in the western United Sates experience continued loss of habitat and food resources due to urbanization, changes in agricultural crops and practices, and water-use conflicts, which threaten the abilities of both public and private landowners to manage wetlands and croplands for cranes. Conservation of habitats and water resources are important to support crane populations and minimize future conflicts with agriculture.

Conference Paper↗

USGS2004

Seismicity and tectonics of El Salvador

The large-scale plate-tectonics framework of El Salvador was defined in the “plate-tectonics revolution” of the 1960s and 1970s, but important issues related to seismic hazards depend on details that have been only recently, or are not yet, understood. Present evidence suggests that coupling across the interface-thrust zone beneath coastal El Salvador is sufficient to produce occasional interface-thrust earthquakes as large as M ∼8. The rate of such earthquakes is determined by the percentage of relative plate motion that is accumulated as elastic strain on the thrust-fault interface between the Cocos and Caribbean plates, which appears to be lower than in many other subduction zones, but is not well established. Earthquakes in the interior of the Cocos plate, such as the El Salvador earthquake of January 13, 2001, account for a significant percentage of Wadati-Benioff zone earthquakes. Separate consideration of the seismic hazard posed by, respectively, Cocos intraplate earthquakes and interface-thrust earthquakes is complicated by the difficulty of separating interface-thrust and Cocos intraplate events in earthquake catalogs. Earthquakes such as the San Vicente–San Salvador sequence of February 13–25, 2001, probably result from the motion of the Central American forearc northwestward with respect to the interior of the Caribbean plate; the geometry of the fault systems that accommodate the motion remains to be worked out. Understanding of this tectonic complexity and associated seismic hazards will be facilitated greatly by the long-term operation of high-sensitivity local seismograph networks, such as that operated by, and currently being upgraded by, the Servicio Nacional de Estudios Territoriales (SNET) of El Salvador.

Special Papers of the Geological Society of Americ↗

USGS2026

Whatever it takes— Shaping the L&O Letters Early Career Publication Honor to deliver true benefit

There are clear advantages for those who openly share their research. Publishing Open Access (OA) articles can increase author visibility (McCabe and Snyder 2014 ), improve productivity metrics (i.e., more diverse and higher citation rates; Huang et al. 2024 ; Piwowar et al. 2018 ), widen collaborative networks (Tai and Robinson 2018 ), and help secure future funding and/or comply with funder mandates (Herrmannova et al. 2019 ; Larivière and Sugimoto 2018 ; McKiernan et al. 2016 and references therein). These benefits can be vital for students and early career researchers (ECRs) trying to advance and thrive in academia. However, publishing papers in Gold OA journals such as L&O Letters comes at a notable financial cost, as these journals require that the corresponding author (or their organization or funder) pay a fee to make their published article immediately freely available to the public. These article processing charges can be prohibitively expensive (Fontúrbel and Vizentin-Bugoni 2021 ; Mekonnen et al. 2022 ; Ross-Hellauer et al. 2022 ). While Read and Publish agreements and waiver programs may be available to help cover these costs, these programs often exclude independent authors as well as those affiliated with ineligible or non-participating institutions (e.g., publisher waivers using the Research4Life eligibility criteria for access currently only allow authors from one of 13 South American countries/territories to publish free of charge). Besides the financial barrier, authors from underrepresented groups can also face a myriad of other publishing roadblocks, such as linguistic challenges (for speakers of English as a foreign language; Amano et al. 2023 ; Franco-Santos 2024 ; Ramírez-Castañeda 2020 ) and geopolitical-scientific bias (e.g., science conducted in the Global South being seen as less impactful and innovative than that conducted in the Global North; Ghosh 2022 ; Smits et al. 2025 ). For context, Global South (GS) and Global North (GN) are not geographic determinations (i.e., South and North hemispheres), but geopolitical classifications regarding a nation's level of development (underdeveloped, developing, or developed). For example: Australia and Brazil are both located in the southern hemisphere, but the former is considered as a Global North (developed) country and the latter as a Global South (underdeveloped or developing) country. When a subset of researchers is unable to openly publish their work, the diversity of voices represented in OA literature can decline (Williams et al. 2023 ). Loss of diversity is a loss to science, as diversity increases productivity, innovation, and scientific impact (refer to opening quote; Freeman and Huang 2014 ; AlShebli et al. 2018 ; Tomillo et al. 2022 ). To partially address the above-mentioned challenges and enable underfunded ECRs to publish their work in OA format, the biennial L&O Letters Early Career Publication Honor (ECPH) was established in 2020 by the ASLO Raelyn Cole Editorial (RCE) Fellows (Hotaling et al. 2022 ). Below we reflect on the benefits, outcomes, and scientific impact of the 2022 call and introduce the articles it helped publish in L&O Letters , which are bundled in this section of the ECPH Virtual Issue. Articles published in L&O Letters during other calls are available in their respective sections. We also refer the reader to six articles published by ECRs in other journals (not included in this Virtual Issue) whose content originally warranted their leading author an ECPH in 2022.

Limnology and Oceanography Letters↗

USGS1992

Toward digital geologic map standards: a progress report

Establishing modern scientific and technical standards for geologic maps and their derivative map products is vital to both producers and users of such maps as we move into an age of digital cartography. Application of earth-science data in complex geographic information systems, acceleration of geologic map production, and reduction of population costs require that national standards be developed for digital geologic cartography and computer analysis. Since December 1988, under commission of the Chief Geologic of the U.S. Geological Survey and the mandate of the National Geologic Mapping Program (with added representation from the Association of American State Geologists), a committee has been designing a comprehensive set of scientific map standards. Three primary issues were: (1) selecting scientific symbology and its digital representation; (2) creating an appropriate digital coding system that characterizes geologic features with respect to their physical properties, stratigraphic and structural relations, spatial orientation, and interpreted mode of origin; and (3) developing mechanisms for reporting levels of certainty for descriptive as well as measured properties. Approximately 650 symbols for geoscience maps, including present usage of the U.S Geological Survey, state geological surveys, industry, and academia have been identified and tentatively adopted. A proposed coding system comprises four-character groupings of major and minor codes that can identify all attributes of a geologic feature. Such a coding system allows unique identification of as many as 105 geologic names and values on a given map. The new standard will track closely the latest developments of the Proposed Standard for Digital Cartographic Data soon to be submitted to the National Institute of Standards and Technology by the Federal Interagency Coordinating Committee on Digital Cartography. This standard will adhere generally to the accepted definitions and specifications for spatial data transfer. It will require separate specifications of digital cartographic quality relating to positional accuracy and ranges of measured and interpreted values such as geologic age and rock composition. Provisional digital geologic map standards will be published for trial implementation. After approximately two years, when comments on the proposed standards have been solicited and modifications made, formal adoption of the standards will be recommended. Widespread acceptance of the new standards will depend on their applicability to the broadest range of earth-science map products and their adaptability to changing cartographic technology.

Conference Paper↗

USGS1964

Ground water in Fountain and Jimmy Camp Valleys, El Paso County, Colorado

The part of Fountain Valley considered in this report extends from Colorado Springs to the Pueblo County line. It is 23 miles long and has an area of 26 square miles. The part of Jimmy Camp Valley discussed is 11 miles long and has an area of 9 square miles. The topography is characterized by level flood plains and alluvial terraces that parallel the valley and by rather steep hills along the valley sides. The climate is semiarid, average annual precipitation being about 13 inches. Farming and stock raising are the principal occupations in the valleys; however, some of the agricultural land near Colorado Springs is being used for housing developments. The Pierre Shale and alluvium underlie most of the area, and mesa gravel caps the shale hills adjacent to Fountain Valley. The alluvium yields water to domestic, stock, irrigation, and public-supply wells and is capable of yielding large quantities of water for intermittent periods. Several springs issue along the sides of the valley at the contact of the mesa gravel and the underlying Pierre Shale. The water table ranges in depth from less than 10 feet along the bottom lands to about 80 feet along the sides of the valleys; the saturated thickness ranges from less than a foot to about 50 feet. The ground-water reservoir in Fountain Valley is recharged by precipitation that falls within the area, by percolation from Fountain Creek, which originates in the Pikes Peak, Monument Valley, and Rampart Range areas, and by seepage from irrigation water. This reservoir contains about 70,000 acre-feet of ground water in storage. The ground-water reservoir in Jimmy Camp Valley is recharged from precipitation that falls within the area, by percolation from Jimmy Camp Creek during periods of streamflow, and by seepage from irrigation water. The Jimmy Camp ground-water reservoir contains about 25,000 acre-feet of water in storage. Ground water is discharged from the area by movement to the south, by evaporation and transpiration in areas of shallow water table, by seepage into Fountain and Jimmy Camp Creeks, and through wells. About 3 to 4 mgd (million gallons per day) of ground water moves through the Fountain Valley alluvium at a velocity of about 15 feet per day. About 1 mgd of ground water moves through the Jimmy Camp Valley alluvium at a velocity of about 6 feet per day. Most of the wells in the area are drilled, but a few are dug. Many large-diameter wells are used for irrigation and public supply: one of the wells

Colorado↗

USGS1995

Acid Rain

Although acid rain is fading as a political issue in the United States and funds for research in this area have largely disappeared, the acidity of rain in the Eastern United States has not changed significantly over the last decade, and it continues to be a serious environmental problem. Acid deposition (commonly called acid rain) is a term applied to all forms of atmospheric deposition of acidic substances - rain, snow, fog, acidic dry particulates, aerosols, and acid-forming gases. Water in the atmosphere reacts with certain atmospheric gases to become acidic. For example, water reacts with carbon dioxide in the atmosphere to produce a solution with a pH of about 5.6. Gases that produce acids in the presence of water in the atmosphere include carbon dioxide (which converts to carbonic acid), oxides of sulfur and nitrogen (which convert to sulfuric and nitric acids}, and hydrogen chloride (which converts to hydrochloric acid). These acid-producing gases are released to the atmosphere through natural processes, such as volcanic emissions, lightning, forest fires, and decay of organic matter. Accordingly, precipitation is slightly acidic, with a pH of 5.0 to 5.7 even in undeveloped areas. In industrialized areas, most of the acid-producing gases are released to the atmosphere from burning fossil fuels. Major emitters of acid-producing gases include power plants, industrial operations, and motor vehicles. Acid-producing gases can be transported through the atmosphere for hundreds of miles before being converted to acids and deposited as acid rain. Because acids tend to build up in the atmosphere between storms, the most acidic rain falls at the beginning of a storm, and as the rain continues, the acids "wash out" of the atmosphere.

Conference Paper↗

USGS1985

The ground-water system and possible effects of underground coal mining in the Trail Mountain area, central Utah

The ground-water system was studied in the Trail Mountain area in order to provide hydrologic information needed to assess the hydrologic effects of underground coal mining. Well testing and spring data indicate that water occurs in several aquifers. The coal-bearing Blackhawk-Star Point aquifer is regional in nature and is the source of most water in underground mines in the region. One or more perched aquifers overlie the Blackhawk-Star Point aquifer in most areas of Trail Mountain. Aquifer tests indicate that the transmissivity of the Blackhawk-Star Point aquifer, which consists mainly of sandstone, siltstone, and shale, ranges from about 20 to 200 feet squared per day in most areas of Trail Mountain. The specific yield of the aquifer was estimated at 0.05, and the storage coefficient is about IxlO"6 per foot of aquifer where confined. The main sources of recharge to the multiaquifer system are snowmelt and rain, and water is discharged mainly by springs and by leakage along streams. Springs that issue from perched aquifers are sources of water for livestock and wildlife on Trail Mountain. Water in all aquifers is suitable for most uses. Dissolved solids concentrations range from about 250 to 700 milligrams per liter, and the predominant dissolved constituents generally are calcium, magnesium, and bicarbonate. Future underground coal mines will require dewatering when they penetrate the Blackhawk-Star Point aquifer. A finitedifference, three-dimensional computer model was used to estimate the inflow of water to various lengths and widths of a hypothetical dewatered mine and to estimate drawdowns of potentiometric surfaces in the partly dewatered aquifer. The estimates were made for a range of aquifer properties and premining hydraulic gradients that were similar to those on Trail Mountain. The computer simulations indicate that mine inflows could be several hundred gallons per minute and that potentiometric surfaces of the partly dewatered aquifer could be drawn down by several hundred feet during a reasonable life span of a mine. Because the Blackhawk-Star Point aquifer is separated from overlying perched aquifers by an unsaturated zone, mine dewatering alone would not affect perched aquifers. Mine dewatering would not significantly change water quality in the Blackhawk-Star Point aquifer. Subsidence will occur above future underground mines, but the effects on the ground-water system cannot be quantified. Subsidence fractures possibly could extend from the roof of a mine into a perched aquifer several hundred feet above. Such fractures would increase down ward percolation of water through the perching bed, and spring discharge from the perched aquifer could decrease. Flow through subsidence fractures also could increase recharge to the Blackhawk-Star Point aquifer and increase inflows to underground mines.

Utah↗

USGS2003

Human-induced contaminant impacts on migratory birds: Lessons from the North American eared grebe ( Podiceps nigricollis )

The effects of aquatic contaminants generated by soda ash mining processes on the North American eared grebe ( Podiceps nigricollis ) population illustrates important issues associated with human-induced habitat degradation on the health of migratory species. Eared grebes have been extensively studied in their staging and breeding habitats, but little is known about their 2- to 3-day migratory periods. During migration, few bodies of water are available to the birds for refuge between freshwater breeding areas in Canada and hypersaline lakes (e.g., Great Salt Lake in Utah or Mono Lake in California) to which they migrate. One geographic refuge area includes a series of "tailings" ponds associated with soda ash mining operations in southwestern Wyoming. The ponds range from 100-1200 acres, with water containing high concentrations of sodium decahydrate (Na 2 CO 3 •10H 2 O). At cool temperatures (generally < 40°F) sodium decahydrate precipitates out of the water and crystallizes on solid objects in the ponds or on the water surface. Bird mortality on these ponds has been recognized since the early 1970's, and the mining companies have developed hazing strategies and rehabilitation programs in order to minimize mortality. In order to determine causes of grebe mortality and devise strategies to reduce mortality, a field epidemiologic investigation was developed with the following objectives: 1) to determine whether eared grebes have quantifiable physiologic abnormalities associated with exposure to soda ash mine pond water; 2) to evaluate physical effects of sodium decahydrate crystallization on grebe survival; 3) to establish cause of death based on necropsy of deceased grebes; 4) to determine long-term survivability of eared grebes after exposure to the pond water; and 5) to evaluate water quality and determine whether aquatic invertebrates are present in the ponds as a possible food source.

California, Utah↗

USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗

USGS2003

Tidal wetland fluxes of dissolved organic carbon and sediment at Browns Island, California: initial evaluation

Carbon and sediment fluxes from tidal wetlands are of increasing concern in the Sacramento-San Joaquin River Delta (Delta), because of drinking water issues and habitat restoration efforts. Certain forms of dissolved organic carbon (DOC) react with disinfecting chemicals used to treat drinking water, to form disinfection byproducts (DBPs), some of which are potential carcinogens. The contribution of DBP precursors by tidal wetlands is unknown. Sediment transport to and from tidal wetlands determines the potential for marsh accretion, thereby affecting habitat formation. Water, carbon, and sediment flux were measured in the main channel of Browns Island, a tidal wetland located at the confluence of Suisun Bay and the Delta. In-situ instrumentation were deployed between May 3 and May 21, 2002. Water flux was measured using acoustic Doppler current profilers and the index-velocity method. DOC concentrations were measured using calibrated ultraviolet absorbance and fluorescence instruments. Suspended-sediment concentrations were measured using a calibrated nephelometric turbidity sensor. Tidally averaged water flux through the channel was dependent on water surface elevations in Suisun Bay. Strong westerly winds resulted in higher water surface elevations in the area east of Browns Island, causing seaward flow, while subsiding winds reversed this effect. Peak ebb flow transported 36% more water than peak flood flow, indicating an ebb-dominant system. DOC concentrations were affected strongly by porewater drainage from the banks of the channel. Peak DOC concentrations were observed during slack after ebb, when the most porewater drained into the channel. Suspended-sediment concentrations were controlled by tidal currents that mobilized sediment from the channel bed, and stronger tides mobilized more sediment than the weaker tides. Sediment was transported mainly to the island during the 2-week monitoring period, though short periods of export occurred during the spring tide. Future deployments will characterize the seasonal variability of these fluxes.

California↗