Geology ReportsSearch

SEARCH · Geology Reports

Results for “Geologic Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

Colored shaded relief bathymetry and acoustic backscatter of Ozette Lake, Washington

Offshore of the Pacific Northwest of the United States is the Cascadia Subduction Zone, a 1,000-kilometer-long tectonic boundary defined by a large fault, called a megathrust, that extends from the Mendocino Junction off northern California to the Nootka Fracture Zone off Vancouver Island, Canada (U.S. Geological Survey, 2023). The Juan de Fuca and Gorda oceanic plates to the west of this boundary subduct under the North America continental plate to the east. Several other smaller faults that cut through the North America plate crust also affect the region. Although their effects upon Ozette Lake are uncertain, geological evidence for past earthquakes, such as underwater landslides, may be found in Pacific Northwest lakes. Underwater landslides caused by past earthquakes should be well preserved in these relatively undisturbed lake environments. The floor of Ozette Lake, Washington, located along the Pacific coast of the United States, west of the Puget Sound region and about 140 kilometers east of the megathrust was mapped by the U.S. Geological Survey in July of 2019 to search for evidence of past earthquakes. Mapping was completed using a SWATHplus-M 234-kHz interferometric side scan sonar system pole-mounted on the U.S. Geological Survey research vessel San Lorenzo. The system collected full-coverage bathymetric and acoustic backscatter data that were processed to 2-meter spatial resolution (Dartnell and others, 2024). This two-map series displays the results of this mapping. A colored shaded relief bathymetry map (sheet 1) and an acoustic backscatter map (sheet 2) show the lake floor morphology and backscatter intensities, respectively, that can be analyzed for evidence of past earthquakes.

Washington

Flood-inundation maps for the Pawtuxet River in West Warwick, Warwick, and Cranston, Rhode Island

A series of 15 digital flood-inundation maps was developed for a 10.2-mile reach of the Pawtuxet River in the municipalities of West Warwick, Warwick, and Cranston, Rhode Island, by the U.S. Geological Survey (USGS), in cooperation with the Rhode Island Emergency Management Agency and the U.S. Army Corps of Engineers. The coverage of the maps extends downstream from Natick Pond dam near State Route 33/Providence Street bridge in West Warwick to the mouth of the river at Pawtuxet Cove (Broad Street bridge) on the border between Cranston and Warwick, R.I. A one-dimensional step-backwater hydraulic model created and calibrated for the Federal Emergency Management Agency Flood Insurance Studies for Kent and Providence Counties in 2015 was updated for this study. The updated hydraulic model reflects the removal of the Pawtuxet Falls dam during 2011 and the raised elevation of a levee surrounding the Warwick Sewer Authority wastewater treatment facility during 2014–17. The hydraulic model was calibrated by using the current (2018) stage-discharge relation at the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) and documented high-water marks from the March 31, 2010, flood, which had a peak flow greater than the estimated 0.2-percent annual exceedance probability floodflow. The hydraulic model was used to compute water-surface profiles for 15 flood stages at 1-foot (ft) intervals referenced to the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) and ranging from 8.0 ft (15.2 ft, North American Vertical Datum of 1988), which is the National Weather Service Advanced Hydrologic Prediction Service flood category “action stage,” to 22.0 ft (29.2 ft, North American Vertical Datum of 1988), which is the maximum stage of the stage-discharge relation at the streamgage and exceeds the National Weather Service Advanced Hydrologic Prediction Service flood category “major flood stage” of 13.0 ft. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data with a 1.0-ft vertical accuracy to create flood-inundation maps. The flood-inundation maps depict estimates of the areal extent and depth of flooding corresponding to 15 selected flood stages at the streamgage. The flood-inundation maps depict only riverine flooding and do not depict any tidal backwater or coastal storm surge that might occur in the lower part of the river reach. The flood-inundation maps can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation . Near-real-time stages and discharges at the Pawtuxet River streamgage can be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ . The National Weather Service Advanced Hydrologic Prediction Service provides flood forecasts of stage for this site (CRAR1) at https:/water.weather.gov/ahps/ . The availability of flood-inundation maps referenced to current and forecasted water levels at the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during flood events.

Rhode Island

Flood-inundation maps for the lower Pawcatuck River in Westerly, Rhode Island, and Stonington and North Stonington, Connecticut

A series of 11 digital flood-inundation maps was developed for a 5.5-mile reach of the lower Pawcatuck River in Westerly, Rhode Island, and Stonington and North Stonington, Connecticut, by the U.S. Geological Survey (USGS) in cooperation with the Town of Westerly, Rhode Island, and the Rhode Island Office of Housing and Community Development. The coverage of the maps extends from downstream from the Ashaway River inflow at the State Border between Hopkinton and Westerly, Rhode Island, and North Stonington, Connecticut, to about 500 feet (ft) downstream from the U.S. Route 1/Broad Street bridge on the State border between Westerly, Rhode Island, and Stonington, Connecticut. A one-dimensional step-backwater hydraulic model created and calibrated for an ongoing (2018) Federal Emergency Management Agency Flood-Insurance Study for New London County, Connecticut and Washington County, Rhode Island was updated for this study. The hydraulic model reflects the removal of the White Rock dam during 2015–16, and was calibrated using the stage-discharge relation at the USGS Pawcatuck River at Westerly, Rhode Island, streamgage (01118500) and documented high-water marks from the March 30, 2010, flood, which had a peak flow slightly greater than the estimated 0.2-percent annual exceedance probability floodflow. The hydraulic model was used to compute water-surface profiles for 11 flood stages at 1-ft intervals referenced to the USGS Pawcatuck River at Westerly, Rhode Island, streamgage (01118500) and ranging from 6.0 ft (3.32 ft, North American Vertical Datum of 1988), which is the National Weather Service Advanced Hydrologic Prediction Service flood category “action stage,” to 16.0 ft (13.32 ft, North American Vertical Datum of 1988), which is the maximum stage of the stage-discharge relation at the streamgage and exceeds the National Weather Service Advanced Hydrologic Prediction Service flood category “major flood stage” of 11.0 ft. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data with a 1.0-ft vertical accuracy to create flood-inundation maps. The flood-inundation maps depict estimates of the areal extent and depth of flooding corresponding to 11 selected flood stages at the streamgage. The flood-inundation maps depict only riverine flooding and do not depict any tidal backwater or coastal storm surge that could occur in the lower part of the river reach. The flood-inundation maps can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation . Near-real-time stages and discharges at the Pawcatuck River streamgage can be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ . The National Weather Service Advanced Hydrologic Prediction Service provides flood forecast of stage for this site (WSTR1) at https://water.weather.gov/ahps/ . The availability of flood-inundation maps referenced to current and forecasted water levels at the USGS Pawcatuck River at Westerly, Rhode Island streamgage (01118500) can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during flood events.

Connecticut, Rhode Island

Geologic Map of the Boxley Quadrangle, Newton and Madison Counties, Arkansas

This map summarizes the geology of the Boxley 7.5-minute quadrangle in the Ozark Plateaus region of northern Arkansas. Geologically, the area lies on the southern flank of the Ozark dome, an uplift that exposes oldest rocks at its center in Missouri. Physiographically, the Boxley quadrangle lies within the Boston Mountains, a high plateau region underlain by Pennsylvanian sandstones and shales. Valleys of the Buffalo River and its tributaries expose an approximately 1,600-ft-(490-m-)thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. Part of Buffalo National River, a park encompassing the Buffalo River and adjacent land that is administered by the National Park Service, extends through the eastern part of the quadrangle. Mapping for this study was conducted by field inspection of numerous sites and was compiled as a 1:24,000-scale geographic information system (GIS) database. Locations and elevation sites were determined with the aid of a global positioning satellite receiver and a hand-held barometric altimeter. Hill-shade-relief and slope maps derived from a U.S. Geological Survey 10-m digital elevation model as well as orthophotos were used to help trace ledge-forming units between field traverses within the Upper Mississippian and Pennsylvanian part of the stratigraphic sequence. Strike and dip of beds were typically measured along stream drainages or at well-exposed ledges. Structure contours were constructed on the top of the Boone Formation and the base of a prominent sandstone unit within the Bloyd Formation based on elevations of control points as well as other limiting information on their maximum or minimum elevations.

Scientific Investigations Map

Ground-water conditions in Utah, spring of 1995

This is the thirty-second in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources, provide data to enable interested parties to keep abreast of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, related changes in precipitation and streamflow, and chemical quality of water. Supplementary data, such as maps showing water-level contours, are included in reports of this series only for those years or areas for which applicable data are available and are important to a discussion of changing ground-water conditions. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 1994. Much of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Divisions of Water Rights and Water Resources.

Utah

Ground-water conditions in Utah, spring of 1996

This is the thirty-third in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources, provide data to enable interested parties to keep abreast of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, related changes in precipitation and streamflow, and chemical quality of water. Supplementary data, such as maps showing water-level contours, are included in reports of this series only for those years or areas for which applicable data are available and are important to a discussion of changing ground-water conditions. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 1995. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Divisions of Water Rights and Water Resources.

Utah

Geologic map and database of the Salem East and Turner 7.5 minute quadrangles, Marion County, Oregon: A digital database

The Salem East and Turner 7.5-minute quadrangles are situated in the center of the Willamette Valley near the western margin of the Columbia River Basalt Group (CRBG) distribution. The terrain within the area is of low to moderate relief, ranging from about 150 to almost 1,100-ft elevation. Mill Creek flows northward from the Stayton basin (Turner quadrangle) to the northern Willamette Valley (Salem East quadrangle) through a low that dissects the Columbia River basalt that forms the Salem Hills on the west and the Waldo Hills to the east. Approximately eight flows of CRBG form a thickness of up to 700 in these two quadrangles. The Ginkgo intracanyon flow that extends from east to west through the south half of the Turner quadrangle is exposed in the hills along the southeast part of the quadrangle. Previous geologic mapping by Thayer (1939) and Bela (1981) while providing the general geologic framework did not subdivide the CRBG which limited their ability to delineate structural elements. Reconnaissance mapping of the CRBG units in the Willamette Valley indicated that these stratigraphic units could serve as a series of unique reference horizons for identifying post-Miocene folding and faulting (Beeson and others, 1985,1989; Beeson and Tolan, 1990). Crenna, et al. (1994) compiled previous mapping in the Willamette Valley in a study of the tectonics of the Salem area. The major emphasis of this study was to identify and map CRBG units within the Salem East and Turner Quadrangles and to utilize this detailed CRBG stratigraphy to identify and characterize structural features. Water well logs were used to provide better subsurface stratigraphic control. Three other quadrangles (Scotts Mills, Silverton, and Stayton NE) in the Willamette Valley have been mapped in this way (Tolan and Beeson, 1999). This area was a lowland area of weathered and eroded marine sedimentary when the Columbia River basalts encroached on this area approximately 15-16 m.y. ago. An incipient Coast Range apparently stopped or diverted the fluid lava flows from moving much farther westward toward the coast at this latitude. It is assumed also that an ancestral Willamette River flowed northward through this low-lying area so that water was present as streams and ponds along the flood plain.

Oregon

IGY to IPY, the U.S. Antarctic oversnow and airborne geophysical-glaciological research program from 1957 to 1964 from the view of a young graduate student

When 12 countries established scientific stations in Antarctica for the 1957-58 (IGY), the Cold War was at its height, seven countries had made claims in Antarctica, and the Antarctic Treaty was in the future. The only major field project of the U.S. IGY Antarctic program was series of oversnow traverses, starting in 1957, making seismic reflection ice soundings (and other geophysical measurements) and glaciological studies. The U.S.S.R. and France made similar traverses coordinated through the IGY. Although geology and topographic mapping were not part of the IGY program because of the claims issue and the possibility of mineral resources, the oversnow traverse parties did geologic work, during which unknown mountains were discovered. The oversnow traverses continued through 1966 and resulted in an excellent first approximation of the snow surface elevation, ice thickness and bed topography of Antarctica, as well as the mean annual temperature of that era and snow accumulation.

Open-File Report

Astrogeologic studies, annual progress report, August 25, 1961 - August 24, 1962

This report, which covers the period August 25, 1961 to August 24, 1962, is the third of a series describing the program of research conducted by the U.S. Geological Survey on behalf of the National Aeronautics and Space Administration. The major long-range objectives of the program are to determine and map the stratigraphy and structure of the Moon's crust, to work out from these the sequence of events that led to the present condition of the Moon's surface, and to determine the processes by which these events took place. This report is presented in four parts with a separate summary. Part A: Lunar and planetary investigations (with map supplement). Geologic mapping of the Moon involves discrimination of the different materials exposed on the lunar surface and their assignment to geologic units, the determination of the photometric characteristics of these materials, delineation of the boundaries of the units and determination of their stratigraphic sequence. Part B: Crater investigations. These include field studies of terrestrial craters, hypervelocity impact experiments with rocks and other materials, studies of the behavior of rocks under high shock loads, and experimental and field studies of shock metamorphism in rocks. Part C: Cosmochemistry and petrography. Studies are being made of the chemical, petrographic, and physical properties of materials of extraterrestrial origin and of certain materials associated with terrestrial impact structures. The studies reported in Part C are concerned with tektites, terrestrial impactites, metallic spherules formed by the Meteor Crater impact event, and particles of possible cosmic origin. Part D: Studies for space flight program. These studies are undertaken to aid in the design of space flight experiments and the planning of space missions. The report that makes up Part D is an evaluation of the lunar flux of secondary particles derived from primary impact events on the lunar surface.

Open-File Report

Percentage change in saturated thickness of the High Plains aquifer, west-central Kansas, 1950 to average 1985-87

Continuing studies are being made in west-central Kansas to provide up-to-date information that will aid in the management of groundwater for irrigation. This report, prepared by the U.S> Geological Survey in cooperation with the Western Kansas Groundwater Management District No. 1, presents the results of the seventh in a series of studies that uses a statistical technique, called kriging, to produce hydrologic maps. The kriging technique interpolates water-level altitudes at the center of each 1-square-mile section in the study area on the basis of water-level measurements from 164 observation wells. For this study, measurements made at each site during the winter months of 1985, 1986, and 1987 were averaged. These interpolated altitudes (1859 in all), along with bedrock-surface and base-year water-level altitudes were used to prepare a hydrologic map that illustrates percentage change in saturated thickness. Saturated thickness, as used in this report, is the thickness of the High Plains Aquifer between the groundwater surface, as indicated by water-level altitudes, and the bedrock surface. Because irrigation development in west-central Kansas was minimal prior to 1950, the saturated thickness during 1950 represented a nearly static condition in the aquifer. Thus, the decrease in saturated thickness of the aquifer since 1950 is related to the effects of irrigation withdrawals on the volume of water in storage.

Kansas

Atlas of Mars: the 1:5,000,000 map series

This atlas comprises small-scale maps and photomosaics covering the entire surface of the planet Mars. The cartographic contents are reduced-scale versions of the 1:5,000,000 topographic series of 30 quadrangles compiled by the U.S. Geological Survey in cooperation with the National Aeronautics and Space Administration (NASA).

NASA SP

Database for the east half of "Preliminary Geologic Map of the Blythe 30' by 60' quadrangle, California and Arizona"

This digital map database was prepared from the published Preliminary Geologic Map of the Blythe 30' by 60' Quadrangle, California and Arizona (U.S. Geological Survey Open-File Report 90-497). This database represents the east half of the original published map. The database contains exactly the same scientific content as the original map; no data have been added to, subtracted from, or modified from the original map. Like the original paper map, this database represents the general distribution of bedrock and surficial deposits in the mapped area. It provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the original published map limits the spatial resolution (scale) of the database to 1:100,000 or smaller.

Arizona, California

Developing a state water plan: Ground-water conditions in Utah, spring of 1968

This report is the fifth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series are prepared cooperatively by the U.S. Geological Survey and the Utah Division of Water Resources and are designed to provide data to enable interested parties such as legislators, administrators, and planners to keep abreast of changing ground-water conditions. This report, like the others (see references, p. 105), contains information on well construction, ground-water withdrawals, water-level changes, and related changes in precipitation and streamflow. It also contains supplementary data that are related to ground-water use in some areas. In reports of this series, the inclusion of such supplementary data as graphs showing chemical quality of water and maps showing water-table configuration is intended only for those years or areas for which applicable data are available and are important to a discussion of changing ground-water conditions. The report includes individual discussions of the most important areas of ground-water withdrawal in the State for the calendar year 1967. Water-level fluctuations, however, are described for the period spring 1967 to spring 1968. Included for the first time in this series of annual reports is a (1) summation of the withdrawal of water from wells in the 5 years 1963-67 (table 3) and (2) maps and discussions of water-level changes for the 5-year period 1963-68. Many of the data used in the report were collected by the Geological Survey in cooperation with the Division of Water Rights, Utah Department of Natural Resources.

Utah

USGS National Assessment of Oil and Gas Online (NOGA Online)

The Central Energy Resources Team (CERT) of the U.S. Geological Survey is providing results of the USGS National Assessment of Oil and Gas online (NOGA Online). In addition to providing resource estimates and geologic reports, NOGA Online includes an internet map application that allows interactive viewing and analysis of assessment data and results. CERT is in the process of reassessing domestic oil and natural gas resources in a series of priority basins in the United States using a Total Petroleum System (TPS) approach where the assessment unit is the basic appraisal unit (rather than the oil and gas play used in the 1995 study). Assessments of undiscovered oil and gas resources in five such priority provinces were recently completed to meet the requirements of the Energy Policy and Conservation Act of 2000 (EPCA 2000). New assessment results are made available at this site on an ongoing basis.

Fact Sheet

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska

Characterization of change in tree cover state and condition over the conterminous United States

Variability in the effects of disturbances and extreme climate events can lead to changes in tree cover over time, including partial or complete loss, with diverse ecological consequences. It is therefore critical to identify in space and time the change processes that lead to tree cover change. Studies of change are often hampered by the lack of data capable of consistently detecting different types of change. Using the Landsat satellite record to create a long time-series of land cover and land cover change, the U.S. Geological Survey Land Change Monitoring Assessment and Projection (LCMAP) project has made an annual time series of land cover across the conterminous United States for the period 1985 to 2018. Multiple LCMAP products analyzed together with map validation reference plots provide a robust basis for understanding tree cover change. In LCMAP (Collection 1.2), annual change detection is based on harmonic model breaks calculated at each Landsat pixel from the Continuous Change Detection and Classification (CCDC) algorithm. The results showed that the majority of CCDC harmonic model breaks (signifying change) indicated partial tree cover loss (associated with management practices such as tree cover thinning) as compared to complete tree cover loss (associated with practices like clearcut harvest or fire disturbance). Substantially fewer occurrences of complete tree cover loss were associated with change in land cover state. The area of annual tree cover change increased after the late 1990s and stayed high for the rest of the study period. The reference data showed that tree harvest dominated across the conterminous United States. The majority of tree cover change occurred in evergreen forests. Large estimates of disturbance-related tree cover change indicated that tree cover loss may have previously been underreported due to omission of partial tree cover loss in prior studies. This has considerable implications for forest carbon accounting along with tracking ecosystem goods and services.

Forests

A Hydrogeologic Map of the Death Valley Region, Nevada and California, Developed Using GIS Techniques

In support of Yucca Mountain site characterization studies, a hydrogeologic framework was developed, and a hydrogeologic map was constructed for the Death Valley region. The region, covering approximately 100,000 km 2 along the Nevada-California border near Las Vegas, is characterized by isolated mountain ranges juxtaposed against broad, alluvium-filled valleys. Geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. The regional ground-water flow system can best be described as a series of connected intermontane basins in which ground-water flow occurs in basin-fill deposits, carbonate rocks, clastic rocks, and volcanic rocks. Previous investigations have developed more site-specific hydrogeologic relationships; however, few have described all the lithologies within the Death Valley regional ground-water flow system. Information required to characterize the hydrogeologic units in the region was obtained from regional geologic maps and reports. Map data were digitized from regional geologic maps and combined into a composite map using a geographic information system. This map was simplified to show 10 laterally extensive hydrogeologic units with distinct hydrologic properties. The hydraulic conductivity values for the hydrogeologic units range over 15 orders of magnitude due to the variability in burial depth and degree of fracturing.

Water-Resources Investigations Report

Geologic map of the Murray Quadrangle, Newton County, Arkansas

This map summarizes the geology of the Murray quadrangle in the Ozark Plateaus region of northern Arkansas. Geologically, the area is on the southern flank of the Ozark dome, an uplift that has the oldest rocks exposed at its center, in Missouri. Physiographically, the Murray quadrangle is within the Boston Mountains, a high plateau region underlain by Pennsylvanian sandstones and shales. Valleys of the Buffalo River and Little Buffalo River and their tributaries expose an approximately 1,600-ft-thick (488-meter-thick) sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. The Buffalo National River, a park that encompasses the Buffalo River and adjacent land that is administered by the National Park Service is present at the northwestern edge of the quadrangle. Mapping for this study was carried out by field inspection of numerous sites and was compiled as a 1:24,000 geographic information system (GIS) database. Locations and elevation of sites were determined with the aid of a global positioning satellite receiver and a hand-held barometric altimeter that was frequently recalibrated at points of known elevation. Hill-shade relief and slope maps derived from a U.S. Geological Survey 10-meter digital elevation model as well as orthophotographs were used to help trace ledge-forming units between field traverses within the Upper Mississippian and Pennsylvanian part of the stratigraphic sequence. Strike and dip of beds were typically measured along stream drainages or at well-exposed ledges. Structure contours, constructed on the top of the Boone Formation and the base of a prominent sandstone unit within the Bloyd Formation, were drawn based on the elevations of field sites on these contacts well as other limiting information for their minimum elevations above hilltops or their maximum elevations below valley bottoms.

Arkansas