Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth in Space”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
USGS2025

Multi-scale intense geoelectric and geomagnetic field perturbations observed after an interplanetary magnetic field turning

Intense geoelectric fields during geomagnetic storms generate geomagnetically induced currents in power grids and other infrastructure, necessitating an understanding of their causes, for example, through coordinated space and ground observations. This study investigates localized intense geoelectric ( E ) and geomagnetic ( B ) field perturbations following an Interplanetary Magnetic Field (IMF) turning during a geomagnetic storm on 25 October 2011. Observations from EarthScope magnetotelluric sites in the upper Midwest United States revealed shorter period ( ∼ 1 min) ultra-low-frequency (ULF) waves superimposed on longer period ( ∼ 10 min) perturbations in both E and B fields. These sites, located at ∼ 19 hr magnetic local time and 56 −57 ° magnetic latitude, recorded large amplitude E and B perturbations. Ground-based all-sky imagers showed auroral brightening with sunward and poleward propagation, while upstream spacecraft linked the perturbations to an IMF turning and solar wind dynamic pressure impulse. The longer-period E and B field perturbations likely stem from localized ionospheric currents tied to substorm auroral activity post-IMF turning. The combination of ionospheric currents, ULF waves, and the Earth's varying conductivity produces intense geoelectric fields of ≥ 2 V/km in the upper Midwest. A comparison using input data and software compatible with the NOAA/USGS geoelectric field nowcast model revealed its limitations in capturing such events due to the temporal and spatial resolution of the underlying data. Using 1-s geomagnetic field data can improve geoelectric field models by capturing short-period and large spatial scale waves, although localized magnetic perturbations remain underestimated due to insufficient ground magnetometer density.

Space Weather↗
USGS2015

Controls on valley spacing in landscapes subject to rapid base-level fall

What controls the architecture of drainage networks is a fundamental question in geomorphology. Recent work has elucidated the mechanisms of drainage network development in steadily uplifting landscapes, but the controls on drainage-network morphology in transient landscapes are relatively unknown. In this paper we exploit natural experiments in drainage network development in incised Plio-Quaternary alluvial fan surfaces in order to understand and quantify drainage network development in highly transient landscapes, i.e. initially unincised low-relief surfaces that experience a pulse of rapid base-level drop followed by relative base-level stasis. Parallel drainage networks formed on incised alluvial-fan surfaces tend to have a drainage spacing that is approximately proportional to the magnitude of the base-level drop. Numerical experiments suggest that this observed relationship between the magnitude of base-level drop and mean drainage spacing is the result of feedbacks among the depth of valley incision, mass wasting and nonlinear increases in the rate of colluvial sediment transport with slope gradient on steep valley side slopes that lead to increasingly wide valleys in cases of larger base-level drop. We identify a threshold magnitude of base-level drop above which side slopes lengthen sufficiently to promote increases in contributing area and fluvial incision rates that lead to branching and encourage drainage networks to transition from systems of first-order valleys to systems of higher-order, branching valleys. The headward growth of these branching tributaries prevents the development of adjacent, ephemeral drainages and promotes a higher mean valley spacing relative to cases in which tributaries do not form. Model results offer additional insights into the response of initially unincised landscapes to rapid base-level drop and provide a preliminary basis for understanding how varying amounts of base-level change influence valley network morphology.

Earth Surface Processes and Landforms↗
USGS2007

The role of fault zone drilling

The objective of fault-zone drilling projects is to directly study the physical and chemical processes that control deformation and earthquake generation within active fault zones. An enormous amount of field, laboratory, and theoretical work has been directed toward the mechanical and hydrological behavior of faults over the past several decades. Nonetheless, it is currently impossible to differentiate between – or even adequately constrain – the numerous conceptual models of active faults proposed over the years. For this reason, the Earth science community is left in the untenable position of having no generally accepted paradigm for the mechanical behavior of faults at depth. One of the primary causes for this dilemma is the difficulty of either directly observing or inferring physical properties and deformation mechanisms along faults at depth, as well as the need to observe directly key parameters such as the state of stress acting on faults at depth, pore fluid pressure (and its possible variation in space and time), and processes associated with earthquake nucleation and rupture. Today, we know very little about the composition of active faults at depth, their constitutive properties, the state of in situ stress or pore pressure within fault zones, the origin of fault-zone pore fluids, or the nature and significance of time-dependent fault-zone processes.

Book chapter↗
USGS2007

Hydrogeologic controls imposed by mechanical stratigraphy in layered rocks of the Chateauguay River Basin, a U.S.-Canada transborder aquifer

[1] The Châteauguay River Basin delineates a transborder watershed with roughly half of its surface area located in northern New York State and half in southern Québec Province, Canada. As part of a multidisciplinary study designed to characterize the hydrogeologic properties of this basin, geophysical logs were obtained in 12 wells strategically located to penetrate the four major sedimentary rock formations that constitute the regional aquifers. The layered rocks were classified according to their elastic properties into three primary units: soft sandstone, hard sandstone, and dolostone. Downhole measurements were analyzed to identify fracture patterns associated with each unit and to evaluate their role in controlling groundwater flow. Fracture networks are composed of orthogonal sets of laterally extensive, subhorizontal bedding plane partings and bed-delimited, subvertical joints with spacings that are consistent with rock mechanics principles and stress models. The vertical distribution of transmissive zones is confined to a few select bedding plane fractures, with soft sandstone having the fewest (one per 70-m depth) and hard sandstone the most (five per 70-m depth). Bed-normal permeability is examined using a probabilistic model that considers the lengths of flow paths winding along joints and bedding plane fractures. Soft sandstone has the smallest bed-normal permeability primarily because of its wide, geomechanically undersaturated joint spacing. Results indicate that the three formations have similar values of bulk transmissivity, within roughly an order of magnitude, but that each rock unit has its own unique system of groundwater flow paths that constitute that transmissivity.

Chateauguay River Basin↗
USGS1978

Results and interpretation of geophysical studies near the Picacho Fault, south-central Arizona

Earth fissuring attributed to ground-water withdrawal occurs throughout south-central Arizona. A large zone of active fissures is located near Picacho, Arizona on the eastern rim of a large subsidence bowl. The main fissure has been named the Picacho fault. During February and March 1977, approximately 6.5 km of seismic-refraction lines were run across the Picacho fault to investigate subsurface conditions down to the crystalline basement. In addition, two lines of close-spaced gravity stations were made across the fault. The gross geologic features inferred from the gravity data agree with the seismic interpretations. Six layers were interpreted from the seismic refraction data: three layers of unconsolidated alluvium, two of denser rock of varying porosity, and the basement rock. Three significant basement faults were identified. These faults appear to lie almost directly beneath the surface fissures. Abrupt slope changes in the alluvial layers and an abrupt velocity change in the denser compacted sediments seem to be related spatially to the surface fissures. In addition there are lateral velocity differences within the basement fault blocks. In the overlying sediments a facies change in a 3.0 km/sec layer is suggested by the abrupt lateral velocity increase from 3.0 km/sec to 3.7 km/sec. This apparent facies change may in fact represent a fault plane extending upwards from the westernmost basement fault. This fault plane may even extend farther into the unconsolidated overlying sediments, inferred from basinward increases in slope, subtle basinward decreases in velocity, and a basinward elevation decrease in the top of the zone of saturation.

Open-File Report↗
USGS2011

Self-potential investigations of a gravel bar in a restored river corridor

Self-potentials (SP) are sensitive to water fluxes and concentration gradients in both saturated and unsaturated geological media, but quantitative interpretations of SP field data may often be hindered by the superposition of different source contributions and time-varying electrode potentials. Self-potential mapping and close to two months of SP monitoring on a gravel bar were performed to investigate the origins of SP signals at a restored river section of the Thur River in northeastern Switzerland. The SP mapping and subsequent inversion of the data indicate that the SP sources are mainly located in the upper few meters in regions of soil cover rather than bare gravel. Wavelet analyses of the time-series indicate a strong, but non-linear influence of water table and water content variations, as well as rainfall intensity on the recorded SP signals. Modeling of the SP response with respect to an increase in the water table elevation and precipitation indicate that the distribution of soil properties in the vadose zone has a very strong influence. We conclude that the observed SP responses on the gravel bar are more complicated than previously proposed semi-empiric relationships between SP signals and hydraulic head or the thickness of the vadose zone. We suggest that future SP monitoring in restored river corridors should either focus on quantifying vadose zone processes by installing vertical profiles of closely spaced SP electrodes or by installing the electrodes within the river to avoid signals arising from vadose zone processes and time-varying electrochemical conditions in the vicinity of the electrodes.

Lake Constance, Neunforn, Thur catchment, Thur val↗
USGS2007

Crust and lithospheric structure – Global crustal structure

The Earth’s crust has played an important role in all aspects of this planet’s evolution. This chapter presents a review of our current understanding of the physical properties of the crust on a global basis. This understanding comes from extensive seismic measurements using many techniques, as well as nonseismic geophysics, including gravity, magnetic, geoelectric, and heat flow measurements. Seismic measurements include those that employ active (man-made) sources and those that use passive (naturally occurring) sources. Deep seismic reflection profiles provide a seismic image of the crust in twodimensions with a high (50–100m) resolution. Local earthquake tomography can provide three-dimensional (3-D) seismic images at moderate (500–1000m) resolution and higher, depending on the number and spacing of seismographs. Nonseismic methods provide estimates of crustal density, magnetic properties, conductivity and geotherms (temperature vs depth). The crust in deep ocean basins is 6–7km thick and has a relatively uniform seismic velocity structure, but there are numerous oceanic regions with anomalous crustal structure, including mid-ocean ridges, trenches, volcanic islands, and oceanic plateaux. Ocean–continent passive margins are also highly variable in structure, and may be classified as volcanic versus nonvolcanic margins. Continental crust ranges in thickness from 16 to 80km, and has a highly variable seismic velocity and density structure. The proportions of continental crust, by area, are 69% shield and platform (cratons), 15% old and young orogens, 9% extended (stretched) crust, 6 % magmatic arc, and 1% rifts. The weighted mean continental crustal thickness and average crustal velocity are 41km (SD 6.2km) and 6.45kms−1 (SD 0.21kms−1), respectively. A global geographic distribution of seismic data has made it possible to create global crustal models with cell sizes as small as 2°×2°. These models provide a complete description of seismic velocities and density within the crust and uppermost mantle, including, where present, ice, water, and sedimentary layers and the crystalline crust (parameterized in three layers, upper, middle and lower crust), and sub-Moho properties. The crust is the most intensely studied region of the Earth’s interior and consequently is the best understood in terms of its structure, composition, and evolution. © 2007 Elsevier B.V. All rights reserved.

Book chapter↗
USGS1998

North American landscape characterization project: The production of a continental scale three-decade Landsat data set

The North American Landscape Characterization (NALC) project is a component of the National Aeronautics and Space Administration (NASA) Landsat Pathfinder program. Pathfinder projects are focused on the investigation of global change utilizing current remote sensing technologies. The NALC project is a cooperative effort between the U. S. Environmental Protection Agency (EPA), the U.S. Geological Survey (USGS), and NASA to make Landsat data available to the widest possible user community for scientific research and general public interest. The NALC project is principally funded by the EPA Office of Research and Development and the USGS's Earth Resources Observation Systems (EROS) Data Center (EDC). The objectives of the NALC project are to produce standardized remote sensing data sets, develop standardized analysis methods, and derive standardized land cover change products for a large portion of the North American continent (the conterminous United States and Mexico) (Lunetta and Sturdevant, 1993). The standard product is the NALC “triplicate”;, consisting of co‐registered Landsat multispectral scanner data for the years 1973, 1986, and 1991 (plus or minus one year), plus co‐registered 3 arcsecond digital terrain elevation data. Processing began with the 1986 scene, which was precision corrected (with full terrain correction) to a 60 meter Universal Transverse Mercator base. Automated cross‐correlation procedures were used to co‐register the 1970's and 1990's data to the 1980's base, and independent verifications of registration quality were performed on all triplicate components. The pertinent metadata were compiled in a relational database, which includes WRS2 path/rows, scene ID's, image dates, solar azimuth and elevation, verification RMSE's, and the number of verification control points. NALC triplicate data sets are being used for a number of applications, including the analysis of urbanization patterns, dynamics of climatic fluctuations, deforestation studies, and vegetation classification and mapping. These data are being distributed through the Earth Observing System Data and Information System (EOSDIS) Information Management System (IMS) at a cost of $15(U.S.) for each triplicate.

Geocarto International↗
USGS1993

Map projections

A map projection is used to portray all or part of the round Earth on a flat surface. This cannot be done without some distortion. Every projection has its own set of advantages and disadvantages. There is no "best" projection. The mapmaker must select the one best suited to the needs, reducing distortion of the most important features. Mapmakers and mathematicians have devised almost limitless ways to project the image of the globe onto paper. Scientists at the U. S. Geological Survey have designed projections for their specific needs—such as the Space Oblique Mercator, which allows mapping from satellites with little or no distortion. This document gives the key properties, characteristics, and preferred uses of many historically important projections and of those frequently used by mapmakers today.

General Information Product↗
USGS1981

The Earth Resources Observation Systems data center's training technical assistance, and applications research activities

The Earth Resources Observation Systems (EROS) Data Center (EDO, administered by the U.S. Geological Survey, U.S. Department of the Interior, provides remotely sensed data to the user community and offers a variety of professional services to further the understanding and use of remote sensing technology. EDC reproduces and sells photographic and electronic copies of satellite images of areas throughout the world. Other products include aerial photographs collected by 16 organizations, including the U.S. Geological Survey and the National Aeronautics and Space Administration. Primary users of the remotely sensed data are Federal, State, and municipal government agencies, universities, foreign nations, and private industries. The professional services available at EDC are primarily directed at integrating satellite and aircraft remote sensing technology into the programs of the Department of the Interior and its cooperators. This is accomplished through formal training workshops, user assistance, cooperative demonstration projects, and access to equipment and capabilities in an advanced data analysis laboratory. In addition, other Federal agencies, State and local governments, universities, and the general public can get assistance from the EDC Staff. Since 1973, EDC has contributed to the accelerating growth in development and operational use of remotely sensed data for land resource problems through its role as educator and by conducting basic and applied remote sensing applications research. As remote sensing technology continues to evolve, EDC will continue to respond to the increasing demand for timely information on remote sensing applications. Questions most often asked about EDC's research and training programs include: Who may attend an EDC remote sensing training course? Specifically, what is taught? Who may cooperate with EDC on remote sensing projects? Are interpretation services provided on a service basis? This report attempts to define the goals and objectives of and policies on the following EDC services: Training Program. User Assistance. Data Analysis Laboratory. Cooperative Demonstration Projects. Research Projects.

Open-File Report↗
USGS2014

The birth and death of transverse aeolian ridges on Mars

Transverse aeolian ridges (TARs) are small bright windblown deposits found throughout the Martian tropics that stand a few meters tall and are spaced a few tens of meters apart. The origin of these features remains mysterious more than 20 years after their discovery on Mars. This paper presents a new hypothesis, that some of the TARs could be indurated dust deposits emplaced millions of years ago during periods of higher axial obliquity. It suggests that these TARs are primary depositional bed forms that accumulated in place from dust carried by the winds in suspension, perhaps in a manner comparable to antidunes on Earth, and were subsequently indurated and eroded to their current states by eons of sandblasting. It points out examples of modern dust drifts and dune‐like features that appear to have been recently formed by dust accumulating directly onto the surface from atmospheric suspension. It shows how these pristine dust deposits could evolve to explain the range of morphologies of the TARs. Finally, it explains how the known properties of many TARs are consistent with this hypothesis, including their composition, thermal behavior, and distribution.

Journal of Geophysical Research E: Planets↗
USGS2019

Dome formation on Ceres by sold-state flow analogous to terrestrial salt tectonics

The dwarf planet Ceres’s outer crust is a complex, heterogeneous mixture of ice, clathrates, salts and silicates. Numerous large domes on Ceres’s surface indicate a degree of geological activity. These domes have been attributed to cryovolcanism, but that is difficult to reconcile with Ceres’s small size and lack of long-lived heat sources. Here we alternatively propose that Ceres’s domes form by solid-state flow within the compositionally heterogeneous crust, a mechanism directly analogous to salt tectonics on Earth. We use numerical simulations to illustrate that differential loading of a crust with compositional heterogeneity on a scale of tens of kilometres can produce dome-like features of scale similar to those observed. The mechanism requires the presence of low-viscosity and low-density, possibly ice-rich, material in the upper 1–10 km of the subsurface. Such substantial regional heterogeneity in Ceres’s crustal composition is consistent with observations from the National Aeronautics and Space Administration’s Dawn mission. We conclude that deformation analogous to that in terrestrial salt tectonics is a viable alternative explanation for the observed surface morphologies, and is consistent with Ceres being both cold and geologically active.

Nature Geoscience↗
USGS2020

Sediment connectivity: A framework for analyzing coastal sediment transport pathways

Connectivity provides a framework for analyzing coastal sediment transport pathways, building on conceptual advances in graph theory from other scientific disciplines. Connectivity schematizes sediment pathways as a directed graph (i.e., a set of nodes and links). This study presents a novel application of graph theory and connectivity metrics like modularity and centrality to coastal sediment dynamics, exemplified here using Ameland Inlet in the Netherlands. We divide the study site into geomorphic cells (i.e., nodes) and then quantify sediment transport between these cells (i.e., links) using a numerical model. The system of cells and fluxes between them is then schematized in a network described by an adjacency matrix. Network metrics like link density, asymmetry, and modularity quantify system‐wide connectivity. The degree, strength, and centrality of individual nodes identify key locations and pathways throughout the system. For instance, these metrics indicate that under strictly tidal forcing, sand originating near shore predominantly bypasses Ameland Inlet via the inlet channels, whereas sand on the deeper foreshore mainly bypasses the inlet via the outer delta shoals. Connectivity analysis can also inform practical management decisions about where to place sand nourishments, the fate of nourishment sand, or how to monitor locations vulnerable to perturbations. There are still open challenges associated with quantifying connectivity at varying space and time scales and the development of connectivity metrics specific to coastal systems. Nonetheless, connectivity provides a promising technique for predicting the response of our coasts to climate change and the human adaptations it provokes.

Ameland Inlet↗
USGS2011

A promising tool for subsurface permafrost mapping-An application of airborne geophysics from the Yukon River Basin, Alaska

Permafrost is a predominant physical feature of the Earth's Arctic and Subarctic clines and a major consideration encompassing ecosystem structure to infrastructure engineering and placement. Perennially frozen ground is estimated to cover about 85 percent of the state of Alaska where northern reaches are underlain with continuous permafrost and parts of interior Alaska are underlain by areas of discontinuous and (or) sporadic permafrost (fig. 1). The region of Interior Alaska, where permafrost is scattered among unfrozen ground, is a complex mosaic of terrains and habitats. Such diversity creates arrays of lakes and surface-water and groundwater patterns that continental populations of migratory waterfowl and internationally significant fisheries have adapted to over time. A road or pipeline might pass over frozen and unfrozen ground, affecting the types of materials and engineering approaches needed to sustain the infrastructure. Effective mapping of discontinuous permafrost at scales meaningful ecologically and (or) from an engineering perspective has been a long-standing challenge. Using techniques such as borehole logging for site-specific assessments or botanical techniques that can suggest underlying permafrost distributions can be labor intensive and difficult to accomplish at the scale and remoteness of much of Alaska. The climate is changing in the Arctic and Subarctic regions. The warming observed throughout much of Alaska could create widespread changes in permafrost. How the warming of the permafrost affects near-surface processes, ecosystems, and community infrastructure and ecosystems is not clear. A better understanding of the dynamic distribution and physical properties of permafrost, from continuous to discontinuous, will provide knowledge of how the permafrost environment may change in the future and help inform engineering and natural resource response strategies. Here we discuss an application of an airborne remote sensing methodology for mapping and shade imaging permafrost characteristics at various scales. This work provides the first look into three-dimensional distribution of permafrost in the areas around Fort Yukon and is a demonstration of the application of airborne electromagnetic (AEM) to permafrost mapping. Such an approach is attractive, particularly in Arctic and Subarctic studies, where ground access is difficult and ecosystems are fragile. In June 2010, the U.S. Geological Survey (USGS) conducted an AEM survey near Fort Yukon, Alaska. The primary focus of this survey was to map the distribution of permafrost in selected areas in order to supply information for the development of groundwater models of the Yukon River Basin. However, the methodologies have more far-reaching ecological and engineering applications. Approximately 1,800 line kilometers were acquired in a combination of typical block style surveying in the immediate area of Fort Yukon and in long reconnaissance lines over a broader area. The widely spaced lines were flown to cross the modern Yukon River in "X" like patterns with intersections at features that have been previously studied (fig. 2). AEM is used to gather data on the electrical resistivity of materials in the subsurface below the flight path of the helicopter, which are then analyzed to interpret the subsurface lithology and the location and extent of permafrost. For this survey, the electrical resistivity was imaged to depths on the order of 50-100 meters. Images from the survey can be qualitatively compared with known permafrost features and suggest new permafrost features. Electrical properties of earth materials are affected by lithology as well as temperature and the presence of ice; frozen materials become substantially more resistive. This allows for the identification of permafrost from the resistivity image (Abraham and others, 2011). In the area of Fort Yukon, the AEM survey shows elevated resistivities extending to depth, likely indicative of thick permafrost. This depth corresponds well to observations from a borehole drilled in the area in the late 1990s, which detected permafrost to a depth of about 100 meters (Clark and others, 2009). In contrast to the area of Fort Yukon, the Yukon River and its floodplain are not associated with deep resistive sediments, suggesting a lack of deep permafrost, at least within the depth range of the AEM mapping (fig. 3).

Yukon River Basin↗
USGS1996

Velocity structure of a bottom simulating reflector offshore Peru: Results from full waveform inversion

Much of our knowledge of the worldwide distribution of submarine gas hydrates comes from seismic observations of Bottom Simulating Reflectors (BSRs). Full waveform inversion has proven to be a reliable technique for studying the fine structure of BSRs using the compressional wave velocity. We applied a non-linear full waveform inversion technique to a BSR at a location offshore Peru. We first determined the large-scale features of seismic velocity variations using a statistical inversion technique to maximise coherent energy along travel-time curves. These velocities were used for a starting velocity model for the full waveform inversion, which yielded a detailed velocity/depth model in the vicinity of the BSR. We found that the data are best fit by a model in which the BSR consists of a thin, low-velocity layer. The compressional wave velocity drops from 2.15 km/s down to an average of 1.70 km/s in an 18m thick interval, with a minimum velocity of 1.62 km/s in a 6 m interval. The resulting compressional wave velocity was used to estimate gas content in the sediments. Our results suggest that the low velocity layer is a 6-18 m thick zone containing a few percent of free gas in the pore space. The presence of the BSR coincides with a region of vertical uplift. Therefore, we suggest that gas at this BSR is formed by a dissociation of hydrates at the base of the hydrate stability zone due to uplift and subsequently a decrease in pressure.

Earth and Planetary Science Letters↗
USGS2017

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong correspondence with rocks closest to the Fall Line and poor correspondence with rocks farther inland. This strongly suggests that the primary source of those heavy minerals, especially monazite, is the rocks that formed the rocky coast that was present during opening of the Atlantic Ocean, which in turn indicates the importance of coastal processes in forming heavy mineral sand concentrations. Furthermore, narrow radiometric eTh and K anomalies are associated with major rivers, indicating limited spatial influence of fluvial processes. Later coastal plain sediment deposition appears to have involved reworking of sediments, providing an “inheritance” of the rocky coast composition that persists for some distance from the Fall Line. However, this inheritance is reduced with distance, and sediments within ∼100 km of the coast in Georgia and Florida exhibit properties indicative of mixing from multiple sources.

GSA Bulletin↗
USGS2013

Tensor-guided fitting of subduction slab depths

Geophysical measurements are often acquired at scattered locations in space. Therefore, interpolating or fitting the sparsely sampled data as a uniform function of space (a procedure commonly known as gridding) is a ubiquitous problem in geophysics. Most gridding methods require a model of spatial correlation for data. This spatial correlation model can often be inferred from some sort of secondary information, which may also be sparsely sampled in space. In this paper, we present a new method to model the geometry of a subducting slab in which we use a data‐fitting approach to address the problem. Earthquakes and active‐source seismic surveys provide estimates of depths of subducting slabs but only at scattered locations. In addition to estimates of depths from earthquake locations, focal mechanisms of subduction zone earthquakes also provide estimates of the strikes of the subducting slab on which they occur. We use these spatially sparse strike samples and the Earth’s curved surface geometry to infer a model for spatial correlation that guides a blended neighbor interpolation of slab depths. We then modify the interpolation method to account for the uncertainties associated with the depth estimates.

Bulletin of the Seismological Society of America↗
USGS2014

Time-averaged discharge rate of subaerial lava at Kīlauea Volcano, Hawai‘i, measured from TanDEM-X interferometry: Implications for magma supply and storage during 2011-2013

Differencing digital elevation models (DEMs) derived from TerraSAR add-on for Digital Elevation Measurements (TanDEM-X) synthetic aperture radar imagery provides a measurement of elevation change over time. On the East Rift Zone (EZR) of Kīlauea Volcano, Hawai‘i, the effusion of lava causes changes in topography. When these elevation changes are summed over the area of an active lava flow, it is possible to quantify the volume of lava emplaced at the surface during the time spanned by the TanDEM-X data—a parameter that can be difficult to measure across the entirety of an ~100 km 2 lava flow field using ground-based techniques or optical remote sensing data. Based on the differences between multiple TanDEM-X-derived DEMs collected days to weeks apart, the mean dense-rock equivalent time-averaged discharge rate of lava at Kīlauea between mid-2011 and mid-2013 was approximately 2 m 3 /s, which is about half the long-term average rate over the course of Kīlauea's 1983–present ERZ eruption. This result implies that there was an increase in the proportion of lava stored versus erupted, a decrease in the rate of magma supply to the volcano, or some combination of both during this time period. In addition to constraining the time-averaged discharge rate of lava and the rates of magma supply and storage, topographic change maps derived from space-based TanDEM-X data provide insights into the four-dimensional evolution of Kīlauea's ERZ lava flow field. TanDEM-X data are a valuable complement to other space-, air-, and ground-based observations of eruptive activity at Kīlauea and offer great promise at locations around the world for aiding with monitoring not just volcanic eruptions but any hazardous activity that results in surface change, including landslides, floods, earthquakes, and other natural and anthropogenic processes.

Hawai'i↗