Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Atlas”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

Digital geologic map of Fort Smith Quadrangle, east-central Oklahoma

This data set consists of digital data and accompanying documentation of the surficial geology of the 1:250,000-scale Fort Smith quadrangle, Oklahoma. The original data are from the Geologic Map, sheet 1 of 4, included in the Oklahoma Geological Survey publication, Reconnaissance of the water resources of the Fort Smith quadrangle, east-central Oklahoma, Hydrologic Atlas 1, Marcher, 1969. The geology was compiled by M.V. Marcher, in 1967.

Open-File Report↗

Digital geologic map of Lawton quadrangle, southwestern Oklahoma

This data set consists of digital data and accompanying documentation for the surficial geology of the 1:250,000-scale Lawton quadrangle, Oklahoma. The original data are from the Geologic Map, sheet 1 of 4, included in the Oklahoma Geological Survey publication, 'Reconnaissance of the water resources of the Lawton quadrangle, southwestern Oklahoma', Hydrologic Atlas 6, Havens, 1977. The geology was compiled by R.O. Fay, in 1967-68 and J.S. Havens, in 1973.

Oklahoma↗

Digital geologic map of McAlester-Texarkana quadrangles, southeastern Oklahoma

This data set consists of digital data and accompanying documentation of the surficial geology of the 1:250,000-scale McAlester and Texarkana quadrangles, Oklahoma. The original data are from the Geologic Map, sheet 1 of 4, included in Oklahoma Geological Survey publication, Reconnaissance of the water resources of the McAlester and Texarkana quadrangles, southeastern Oklahoma, Hydrologic Atlas 9, Marcher and Bergman, 1983. The geology was compiled by M.V. Marcher and D.L. Bergman, 1971, and revised by R.O. Fay, 1978.

Oklahoma↗

Digital geologic map of Oklahoma City Quadrangle, central Oklahoma

This data set consists of digital data and accompanying documentation of the surficial geology of the 1:250,000-scale Oklahoma City quadrangle, Oklahoma. The original data are from the Geologic Map, sheet 1 of 4, included in the Oklahoma Geological Survey publication, 'Reconnaissance of the water resources of the Oklahoma City quadrangle, central Oklahoma', Hydrologic Atlas 4, Bingham and Moore, 1975. The geology was compiled by R.H. Bingham and R.O. Fay, in 1973.

Open-File Report↗

Digital geologic map of Texas County, Oklahoma

This data set consists of digital data and accompanying documentation for the surficial geology of Texas County, Oklahoma. The original data are from the Hydrogeologic Map, sheet 1 of 3, included in the U.S. Geological Survey publication, Availability of ground water in Texas County, Oklahoma, Hydrologic Investigations Atlas HA-250, Wood and Hart, 1967. The geology was compiled by S.L. Schoff, 1939 and 1953.

Oklahoma↗

Digital geologic map of Tulsa quadrangle, northeastern Oklahoma

This data set consists of digital data and accompanying documentation of the surficial geology of the 1:250,000-scale Tulsa quadrangle, Oklahoma. The original data are from the Geologic Map, sheet 1 of 4, included in the Oklahoma Geological Survey publication, 'Reconnaissance of the water resources of the Tulsa quadrangle, northeastern Oklahoma', Hydrologic Atlas 2, Marcher and Bingham, 1971. The geology was compiled by M.V. Marcher, in 1969.

Oklahoma↗

Digital geologic map of Woodward Quadrangle, south-central Oklahoma

This data set consists of digital data and accompanying documentation for the surficial geology of the 1:250,000-scale Woodward quadrangle. The original data are from the Geologic Map, sheet 1 of 4, included in the Oklahoma Geological Survey publication, Reconnaissance of the water resources of the Woodward quadrangle, northwestern Oklahoma, Hydrologic Atlas 8, Morton, 1980. The geology was compiled by R.B. Morton, 1973 and R.O. Fay, 1977.

Open-File Report↗

Map projections: A working manual

After decades of using only one map projection, the Polyconic, for its mapping program, the U.S. Geological Survey (USGS) now uses several of the more common projections for its published maps. For larger scale maps, including topographic quadrangles and the State Base Map Series, conformal projections such as the Transverse Mercator and the Lambert Conformal Conic are used. Equal-area and equidistant projections appear in the National Atlas. Other projections, such as the Miller Cylindrical and the Van der Grinten, are chosen occasionally for convenience, sometimes making use of existing base maps prepared by others. Some projections treat the Earth only as a sphere, others as either ellipsoid or sphere. The USGS has also conceived and designed several new projections, including the Space Oblique Mercator, the first map projection designed to permit mapping of the Earth continuously from a satellite with low distortion. The mapping of extraterrestrial bodies has resulted in the use of standard projections in completely new settings. Several other projections which have not been used by the USGS are frequently of interest to the cartographic public. With increased computerization, it is important to realize that rectangular coordinates for all these projections may be mathematically calculated with formulas which would have seemed too complicated in the past, but which now may be programmed routinely, especially if aided by numerical examples. A discussion of appearance, usage, and history is given together with both forward and inverse equations for each projection involved.

Professional Paper↗

Physiography and Quaternary geology of the San Juan Mountains, Colorado

The scenic beauty, rugged contour, and great variety of geologic phenomena displayed by the San Juan Mountains of southwestern Colorado have lured to that region many geologists, both professional and amateur, as well as countless laymen. Serious geologic studies in these mountains seem to fall historically into three periods. The first of these covers the work of the geologists and topographers of the United States Geological and Geographical Survey of the Territories. Field studies were prosecuted under the general direction of F. V. Hayden in this region from 1869 to 1876, and the results obtained were published among the monographs of the Hayden Survey. The second period of geologic examinations began in 1887, when Whitman Cross undertook investigations of certain of the mining districts in the San Juan region, which by that time had attracted much attention in the mining world. The results of this second series of studies have appeared from time to time as folios"' of the Geologic Atlas and reports on the economic geology of the mining districts, published by the United States Geological Survey between 1899 and 1910. Gradually the concept of the geologic problems was changed. Instead of considering individual mining districts as the units of investigation it became apparent that the San Juan region must itself be the unit. In 1908 Mr. Cross drafted plans for the completion of the San Juan studies on this enlarged basis. His aim was to arrange for the publication of papers on different subjects rather than one huge monograph on the region as a whole.

Colorado, New Mexico↗

Tectonic and igneous geology of the northern Shoshone Range, Nevada

Part of the northern Shoshone Range and its bordering valleys are shown in the Mount Lewis and Crescent Valley quadrangles of the U.S. Geological Survey's Topographic Atlas. A very small part of the Cortez Mountains extends into the Crescent Valley quadrangle and is also described.

Nevada↗

United States mineral resources

The work on this volume began in January 1972, but in a broader sense its production began many years ago. The chapters were written by geologists most of whom have had many years of experience studying the geology of mineral deposits, and more particularly the commodities about which they have written here. A total of nearly 2,300 man-years of professional experience in the geology of mineral resources is represented by the authors of the volume, and about 30 man-years went directly into its preparation. Each chapter contains not only a synthesis of the state of knowledge of the geology of the commodity, but also an appraisal of the known resources, and an examination of the geologic possibilities for finding additional deposits. In January 1972, responsibility for the preparation of the volume was assigned to us as co-editors, and we were given a tentative list of commodities and authors. We provided each author with a suggested outline of general topics to be covered, and some guidelines as to scope and philosophy of approach, but beyond that we avoided any attempt to fit each chapter into a stereotype. Moreover, the types of commodities range from the major metals and industrial minerals such as copper, silver, and fluorspar, which have been the subject of geologic research for years, to other commodities that are of such varied geologic nature (such as pigments or gemstones) or of such minor present importance (such as scandium or thallium) that they cannot be treated from the same viewpoint as the major minerals. The chapters range, therefore, from comprehensive summary reports to general essays that reflect the individuality of the authors as well as the variation among commodities. Throughout the book the emphasis is on geology, but each chapter contains some summary information on uses, technology, and economics. These summaries are not meant to be exhaustive, however, and additional details are in the 1970 edition of "Mineral Facts and Problems" (Bulletin 650 of the U.S. Bureau of Mines) ; indeed, we regard that book and the present volume as being complementary. In the examination of the geologic possibilities for finding new deposits-in many respects the principal innovative contributions of this volume-we asked the authors to frankly apply the limits of their ingenuity and not only to summarize current theories but also to express their own intuitive ideas, however speculative and unconventional they may seem, that have come from years of study devoted to the origin of mineral deposits. Readers will see that some authors have speculated more courageously than others. In any case, we believe readers will find all the chapters interesting, and many stimulating; and a few we believe can be frankly characterized as intellectually exciting. Most chapters include a section on prospecting techniques, and a summary of geologic or related problems on which the authors believe research might be most fruitful in the continuing efforts to find new resources. An integral part of the book is the bibliographic material cited at the conclusion of each chapter, in lieu of repetition of detailed descriptions already in print. Index and "spot" maps are not included in most chapters because they are available elsewhere, and in many cases with more detail than could possibly be included here. Maps showing the distribution of known deposits of many commodities in the United States are available in the Mineral Resource (MR) map series of the U.S. Geological Survey and in the National Atlas of the United States. The first three chapters deal not with resources of specific commodities but with general information that is pertinent to the study of mineral resources. In the introductory chapter we discuss the purposes of the book, the distinctions between reserves and various categories of resources, and some general conclusions drawn from our view of the book in its entirety. In the second chapter V. E. McKelvey discusses the problems of mineral-resource estimates and public policy. In the third chapter, R. L. Erickson discusses some new points of view on the relation of reserves and resources to the crustal abundance of elements. We acknowledge with thanks the cooperation of our colleagues in all phases of the preparation of this volume. Whatever success the book may attain is due entirely to a total effort. A paragraph of acknowledgment originally submitted as a part of the chapter on "Nuclear fuels" is given here instead because we feel it applied to all chapters: "The writers have drawn freely from published information, not all of which is cited, and from their colleagues, none of whom are given specific credit. The reader should be aware that the paper could not have been written without these sources." We extend specific thanks to Michael Fleischer for preparation of summaries of geochemical information that are included in many chapters.

Professional Paper↗

Dike rocks of the Apishapa quadrangle, Colorado

The Apishapa quadrangle, the geographic relations of which are shown by Plate IV, is situated on the plains south of Arkansas River, in Colorado, about 24 miles east of the mountain front. The geology of the Pueblo, Walsenburg, Spanish Peaks, and Elmoro quadrangles, adjoining it on the northwest, west, southwest, and south, respectively, has been described in folios of the Geologic Atlas. G. K. Gilbert, assisted by F. P. Gulliver and G. W. Stose, took up the survey of the Apishapa area in 1894. The Apishapa folio was completed by Stose and was issued in 1913. The rocks to be described in this paper were collected by Gilbert and his assistants, the present writer never having visited the area. The following description of the occurrence of the has been kindly furnished by Mr. Stose.

Colorado↗

State of Florida 1:24,000- and 1:100,000-scale quadrangle index map - Highlighting low-lying areas derived from USGS Digital Elevation Models

In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts 1:24,000- and 1:100,000-scale quadrangle footprints over a color shaded relief representation of the State of Florida. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED source data for this map consists of a mixture of 30-meter- and 10-meter-resolution DEMs. The NED data were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Figure 1 shows a similar representation for the entire U.S. Gulf Coast, using coarsened 30-meter NED data. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and county boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. Quadrangle names, dated April, 2006, were obtained from the Federal Geographic Names Information System. The NED data were downloaded in 2004.

Scientific Investigations Map↗

Gulf of Mexico region — Highlighting low-lying areas derived from USGS Digital Elevation Data

In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts a color shaded relief representation of the area surrounding the Gulf of Mexico. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED data were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s data) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Approximately one-half of the area shown on this map has DEM source data at a 30-meter resolution, with the remaining half consisting of 10-meter contour-derived DEM data or higher-resolution LIDAR data. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and county boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. The NED data were downloaded in 2005.

Alabama, Florida, Louisiana, Mississippi, Texas↗

State of Louisiana - Highlighting low-lying areas derived from USGS Digital Elevation Data

In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts a color shaded relief representation highlighting the State of Louisiana and depicts the surrounding areas using muted elevation colors. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED data are a mixture of data and were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Approximately one-half of the area shown on this map has DEM source data at a 30-meter resolution, with the remaining half consisting of mostly 10-meter contour-derived DEM data and some small areas of higher-resolution LIght Detection And Ranging (LIDAR) data along parts of the coastline. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and parish boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. The NED data were downloaded in 2007.

Scientific Investigations Map↗

Potentiometric surface in the Central Oklahoma (Garber-Wellington) aquifer, Oklahoma, 2009

A study of the hydrogeology of the Central Oklahoma aquifer was started in 2008 to provide the Oklahoma Water Resources Board (OWRB) hydrogeologic data and a groundwater flow model that can be used as a tool to help manage the aquifer. The 1973 Oklahoma water law requires the OWRB to do hydrologic investigations of Oklahoma's aquifers (termed 'groundwater basins') and to determine amounts of water that may be withdrawn by permitted water users. 'Maximum annual yield' is a term used by OWRB to describe the total amount of water that can be withdrawn from a specific aquifer in any year while allowing a minimum 20-year life of the basin (Oklahoma Water Resources Board, 2010). Currently (2010), the maximum annual yield has not been determined for the Central Oklahoma aquifer. Until the maximum annual yield determination is made, water users are issued a temporary permit by the OWRB for 2 acre-feet/acre per year. The objective of the study, in cooperation with the Oklahoma Water Resources Board, was to study the hydrogeology of the Central Oklahoma aquifer to provide information that will enable the OWRB to determine the maximum annual yield of the aquifer based on different proposed management plans. Groundwater flow models are typically used by the OWRB as a tool to help determine the maximum annual yield. This report presents the potentiometric surface of the Central Oklahoma aquifer based on water-level data collected in 2009 as part of the current (2010) hydrologic study. The U.S. Geological Survey (USGS) Hydrologic Investigations Atlas HA-724 by Christenson and others (1992) presents the 1986-87 potentiometric-surface map. This 1986-87 potentiometric-surface map was made as part of the USGS National Water-Quality Assessment pilot project for the Central Oklahoma aquifer that examined the geochemical and hydrogeological processes operating in the aquifer. An attempt was made to obtain water-level measurements for the 2009 potentiometric-surface map from the wells used for the 1986-87 potentiometric-surface map. Well symbols with circles on the 2009 potentiometric-surface map (fig. 1) indicate wells that were used for the 1986-87 potentiometric-surface map.

Scientific Investigations Map↗

The Amphibian Research and Monitoring Initiative (ARMI): 5-year report

The Amphibian Research and Monitoring Initiative (ARMI) is an innovative, multidisciplinary program that began in 2000 in response to a congressional directive for the Department of the Interior to address the issue of amphibian declines in the United States. ARMI’s formulation was cross-disciplinary, integrating U.S. Geological Survey scientists from Biology, Water, and Geography to develop a course of action (Corn and others, 2005a). The result has been an effective program with diverse, yet complementary, expertise. ARMI’s approach to research and monitoring is multiscale. Detailed investigations focus on a few species at selected local sites throughout the country; monitoring addresses a larger number of species over broader areas (typically, National Parks and National Wildlife Refuges); and inventories to document species occurrence are conducted more extensively across the landscape. Where monitoring is conducted, the emphasis is on an ability to draw statistically defensible conclusions about the status of amphibians. To achieve this objective, ARMI has instituted a monitoring response variable that has nationwide applicability. At research sites, ARMI focuses on studying species/environment interactions, determining causes of observed declines, and developing new techniques to sample populations and analyze data. Results from activities at all scales are provided to scientists, land managers, and policymakers, as appropriate. The ARMI program and the scientists involved contribute significantly to understanding amphibian declines at local, regional, national, and international levels. Within National Parks and National Wildlife Refuges, findings help land managers make decisions applicable to amphibian conservation. For example, the National Park Service (NPS) selected amphibians as a vital sign for several of their monitoring networks, and ARMI scientists provide information and assistance in developing monitoring methods for this NPS effort. At the national level, ARMI has had major exposure at a variety of meetings, including a dedicated symposium at the 2004 joint meetings of the Herpetologists’ League, the American Society of Ichthyologists and Herpetologists, and the Society for the Study of Amphibians and Reptiles. Several principal investigators have brought international exposure to ARMI through venues such as the World Congress of Herpetology in South Africa in 2005 (invited presentation by Dr. Gary Fellers), the Global Amphibian Summit, sponsored by the International Union for Conservation of Nature (IUCN) and Wildlife Conservation International, in Washington, D.C., 2005 (invited participation by Dr. P.S. Corn), and a special issue of the international herpetological journal Alytes focused on ARMI in 2004 (edited by Dr. C.K. Dodd, Jr.). ARMI research and monitoring efforts have addressed at least 7 of the 21 Threatened and Endangered Species listed by the U.S. Fish and Wildlife Service (California red-legged frog [Rana draytonii], Chiricahua leopard frog [R. chiricahuensis], arroyo toad [Bufo californicus], dusky gopher frog [Rana sevosa], mountain yellow-legged frog [R. muscosa], flatwoods salamander [Ambystoma cingulatum], and the golden coqui [Eleutherodactylus jasperi]), and 9 additional species of concern recognized by the IUCN. ARMI investigations have addressed time-sensitive research, such as emerging infectious diseases and effects on amphibians related to natural disasters like wildfire, hurricanes, and debris flows, and the effects of more constant, environmental change, like urban expansion, road development, and the use of pesticides. Over the last 5 years, ARMI has partnered with an extensive list of government, academic, and private entities. These partnerships have been fruitful and have assisted ARMI in developing new field protocols and analytic tools, in using and refining emerging technologies to improve accuracy and efficiency of data handling, in conducting amphibian disease, malformation, and environmental effects research, and in implementing a network of monitoring and research sites. Accomplishments from these endeavors include more than 40 publications on amphibian status and trends, nearly 100 publications on amphibian ecology and causes of declines, and over 30 methodological publications. Several databases have emerged as a result of ARMI and its partnerships; one, a digital atlas of ranges for all U.S. amphibian species, was used by the IUCN to display amphibian distribution maps in the Global Amphibian Assessment Project. Given the scope of ARMI and the panoply of projects, findings have had implications for policy. Investigations that demonstrate amphibian declines or illuminate causes of declines provide valuable information about habitat management, environmental effects, mechanisms for the spread of disease, and human/amphibian interfaces. This information has been made available to land managers, scientists, educators, Congress and other policymakers, and the public. The support afforded ARMI by Congress has been influential in the program’s development and success. The value of ARMI’s efforts will continue to increase as we are able to extend our studies spatially and temporally to answer critical questions with more confidence. We are using ARMI’s resources efficiently and continuing to develop innovative mechanisms for leveraging resources for maximum effectiveness during challenging financial times. This report is a 5-year retrospective of the structure, methodology, progress, and contributions to the broader scientific community that have resulted from this national USGS program. We evaluate ARMI’s success to date, with regard to the challenges faced by the program and the strengths that have emerged. We chart objectives for the next 5 years that build on current accomplishments, highlight areas meriting further research, and direct efforts to overcome existing weaknesses.

Scientific Investigations Report↗

Porphyry copper assessment of East and Southeast Asia: Philippines, Taiwan (Republic of China), Republic of Korea (South Korea), and Japan

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of East and Southeast Asia as part of a global mineral resource assessment. The assessment covers the Philippines in Southeast Asia, and the Republic of Korea (South Korea), Taiwan (Province of China), and Japan in East Asia. The Philippines host world class porphyry copper deposits, such as the Tampakan and Atlas deposits. No porphyry copper deposits have been discovered in the Republic of Korea (South Korea), Taiwan (Province of China), or Japan. Thirteen geographic areas were delineated as tracts that are permissive for porphyry copper deposits in the assessed area. Individual tracts range from about 3,000 to 100,000 square kilometers in area. Permissive tracts are delineated on the basis of mapped distributions of igneous rocks of specific age ranges that define subduction-related magmatic arcs or magmatic belts that might contain porphyry copper deposits. Most of these magmatic arcs are subduction related, although some porphyry deposits and prospects are present in back-arc or poorly understood tectonic settings. Maps at various scales were used in the compilation; however, the final tract boundaries are intended for use at a scale of 1:1,000,000. Numbers of undiscovered deposits were estimated at different levels of confidence for 10 permissive tracts in the Philippines including one area that extends to eastern Taiwan (Republic of China); permissive tracts in South Korea and Japan are discussed qualitatively. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models using Monte Carlo simulation to estimate amounts of undiscovered resources. Grades and tonnages of known porphyry copper deposits in the study area were compared with global grade and tonnage models to determine the appropriate model for simulation of undiscovered resources. Most of the known deposits are best described as copper-gold subtypes of porphyry copper deposits. For some permissive tracts, a general porphyry copper-gold-molybdenum model was used. Thirty-eight porphyry copper deposits are known in the Philippines; the mean number of undiscovered deposits was estimated to be 28. Mean (arithmetic) resources that could be associated with the undiscovered deposits are 90 million metric tons of copper and 5,800 metric tons of gold, as well as byproduct molybdenum and silver. Additional resources that could be discovered in extensions to known deposits were not evaluated. Assessment results, presented in tables and graphs, indicate expected amounts of total contained metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. The Philippines have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in the region. South Korea and Japan have been thoroughly explored for many types of mineral deposits. Available data suggest that the permissive rocks in South Korea typically are too deeply eroded to preserve porphyry copper deposits. Porphyry copper systems may be present in Japan, but are likely to lie at depths greater than the 1 kilometer from the surface protocol adopted for this study. Descriptions of the geologic basis for delineating each tract, the data used, the geologic criteria and rationale for the assessment, and results of the assessment are included in appendixes along with the description of a geographic information system (GIS) that includes tract boundaries, known porphyry copper deposits and significant prospects, and assessment results.

Scientific Investigations Report↗