Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Watershed Events”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
USGS2014

Water's Way at Sleepers River watershed – revisiting flow generation in a post-glacial landscape, Vermont USA

The Sleepers River Research Watershed (SRRW) in Vermont, USA, has been the site of active hydrologic research since 1959 and was the setting where Dunne and Black demonstrated the importance and controls of saturation-excess overland flow (SOF) on streamflow generation. Here, we review the early studies from the SRRW and show how they guided our conceptual approach to hydrologic research at the SRRW during the most recent 25 years. In so doing, we chronicle a shift in the field from early studies that relied exclusively on hydrometric measurements to today's studies that include chemical and isotopic approaches to further elucidate streamflow generation mechanisms. Highlights of this evolution in hydrologic understanding include the following: (i) confirmation of the importance of SOF to streamflow generation, and at larger scales than first imagined; (ii) stored catchment water dominates stream response, except under unusual conditions such as deep frozen ground; (iii) hydrometric, chemical and isotopic approaches to hydrograph separation yield consistent and complementary results; (iv) nitrate and sulfate isotopic compositions specific to atmospheric inputs constrain new water contributions to streamflow; and (v) convergent areas, or ‘hillslope hollows’, contribute disproportionately to event hydrographs. We conclude by summarizing some remaining challenges that lead us to a vision for the future of research at the SRRW to address fundamental questions in the catchment sciences.

Vermont↗
USGS2014

Evaluation of statistically downscaled GCM output as input for hydrological and stream temperature simulation in the Apalachicola–Chattahoochee–Flint River Basin (1961–99)

The accuracy of statistically downscaled general circulation model (GCM) simulations of daily surface climate for historical conditions (1961–99) and the implications when they are used to drive hydrologic and stream temperature models were assessed for the Apalachicola–Chattahoochee–Flint River basin (ACFB). The ACFB is a 50 000 km 2 basin located in the southeastern United States. Three GCMs were statistically downscaled, using an asynchronous regional regression model (ARRM), to ⅛° grids of daily precipitation and minimum and maximum air temperature. These ARRM-based climate datasets were used as input to the Precipitation-Runoff Modeling System (PRMS), a deterministic, distributed-parameter, physical-process watershed model used to simulate and evaluate the effects of various combinations of climate and land use on watershed response. The ACFB was divided into 258 hydrologic response units (HRUs) in which the components of flow (groundwater, subsurface, and surface) are computed in response to climate, land surface, and subsurface characteristics of the basin. Daily simulations of flow components from PRMS were used with the climate to simulate in-stream water temperatures using the Stream Network Temperature (SNTemp) model, a mechanistic, one-dimensional heat transport model for branched stream networks. The climate, hydrology, and stream temperature for historical conditions were evaluated by comparing model outputs produced from historical climate forcings developed from gridded station data (GSD) versus those produced from the three statistically downscaled GCMs using the ARRM methodology. The PRMS and SNTemp models were forced with the GSD and the outputs produced were treated as “truth.” This allowed for a spatial comparison by HRU of the GSD-based output with ARRM-based output. Distributional similarities between GSD- and ARRM-based model outputs were compared using the two-sample Kolmogorov–Smirnov (KS) test in combination with descriptive metrics such as the mean and variance and an evaluation of rare and sustained events. In general, precipitation and streamflow quantities were negatively biased in the downscaled GCM outputs, and results indicate that the downscaled GCM simulations consistently underestimate the largest precipitation events relative to the GSD. The KS test results indicate that ARRM-based air temperatures are similar to GSD at the daily time step for the majority of the ACFB, with perhaps subweekly averaging for stream temperature. Depending on GCM and spatial location, ARRM-based precipitation and streamflow requires averaging of up to 30 days to become similar to the GSD-based output. Evaluation of the model skill for historical conditions suggests some guidelines for use of future projections; while it seems correct to place greater confidence in evaluation metrics which perform well historically, this does not necessarily mean those metrics will accurately reflect model outputs for future climatic conditions. Results from this study indicate no “best” overall model, but the breadth of analysis can be used to give the product users an indication of the applicability of the results to address their particular problem. Since results for historical conditions indicate that model outputs can have significant biases associated with them, the range in future projections examined in terms of change relative to historical conditions for each individual GCM may be more appropriate.

Florida, Georgia↗
USGS2015

Timing of susceptibility to post-fire debris flows in the western USA

Watersheds recently burned by wildfires can have an increased susceptibility to debris flow, although little is known about how long this susceptibility persists, and how it changes over time. We here use a compilation of 75 debris-flow response and fire-ignition dates, vegetation and bedrock class, rainfall regime, and initiation process from throughout the western U.S. to address these issues. The great majority (85 percent) of debris flows occurred within the first 12 months following wildfire, with 71 percent within the first six months. Seven percent of the debris flows occurred between 1 and 1.5 years after a fire, or during the second rainy season to impact an area. Within the first 1.5 years following fires, all but one of the debris flows initiated through runoff-dominated processes, and debris flows occurred in similar proportions in forested and non-forested landscapes. Geologic materials affected how long debris-flow activity persisted, and the timing of debris flows varied within different rainfall regimes. A second, later period of increased debris flow susceptibility between 2.2 and 10 years after fires is indicated by the remaining 8 percent of events, which occurred primarily in forested terrains and initiated largely through landslide processes. The short time period between fire and debris-flow response within the first 1.5 years after ignition, and the longer-term response between 2.2 and 10 years after fire, demonstrate the necessity of both rapid and long-term reactions by land managers and emergency-response agencies to mitigate hazards from debris flows from recently burned areas in the western U.S.

Environmental & Engineering Geoscience↗
USGS2016

Effects of flow regime on metal concentrations and the attainment of water quality standards in a remediated stream reach, Butte, Montana

Low-flow synoptic sampling campaigns are often used as the primary tool to characterize watersheds affected by mining. Although such campaigns are an invaluable part of site characterization, investigations which focus solely on low-flow conditions may yield misleading results. The objective of this paper is to demonstrate this point and elucidate the mechanisms responsible for the release of metals during rainfall runoff. This objective is addressed using data from diel and synoptic sampling campaigns conducted over a two-day period. Low-flow synoptic sampling results indicate that concentrations of most constituents meet aquatic standards. This finding is in contrast to findings from a diel sampling campaign that captured dramatic increases in concentrations during rainfall runoff. Concentrations during the rising limb of the hydrograph were 2–23 times concentrations observed during synoptic sampling (most increases were >10-fold), remaining elevated during the receding limb of the hydrograph to produce a clockwise hysteresis loop. Hydrologic mechanisms responsible for the release of metals include increased transport due to resuspension of streambed solids, erosion of alluvial tailings, and overland flow. Rainfall also elevated the alluvial groundwater table and increased infiltration through the vadose zone, likely resulting in dissolution from alluvial tailings that were dry prior to the event.

Montana↗
USGS2009

Environmental Impact of the Helen, Research, and Chicago Mercury Mines on Water, Sediment, and Biota in the Upper Dry Creek Watershed, Lake County, California

The Helen, Research, and Chicago mercury (Hg) deposits are among the youngest Hg deposits in the Coast Range Hg mineral belt and are located in the southwestern part of the Clear Lake volcanic field in Lake County, California. The mine workings and tailings are located in the headwaters of Dry Creek. The Helen Hg mine is the largest mine in the watershed having produced about 7,600 flasks of Hg. The Chicago and Research Hg mines produced only a small amount of Hg, less than 30 flasks. Waste rock and tailings have eroded from the mines, and mine drainage from the Helen and Research mines contributes Hg-enriched mine wastes to the headwaters of Dry Creek and contaminate the creek further downstream. The mines are located on federal land managed by the U.S. Bureau of Land Management (USBLM). The USBLM requested that the U.S. Geological Survey (USGS) measure and characterize Hg and geochemical constituents in tailings, sediment, water, and biota at the Helen, Research, and Chicago mines and in Dry Creek. This report is made in response to the USBLM request to conduct a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA - Removal Site Investigation (RSI). The RSI applies to removal of Hg-contaminated mine waste from the Helen, Research, and Chicago mines as a means of reducing Hg transport to Dry Creek. This report summarizes data obtained from field sampling of mine tailings, waste rock, sediment, and water at the Helen, Research, and Chicago mines on April 19, 2001, during a storm event. Further sampling of water, sediment, and biota at the Helen mine area and the upper part of Dry Creek was completed on July 15, 2003, during low-flow conditions. Our results permit a preliminary assessment of the mining sources of Hg and associated chemical constituents that could elevate levels of monomethyl Hg (MMeHg) in the water, sediment, and biota that are impacted by historic mining.

Open-File Report↗
USGS2013

Population ecology of variegate darter (Etheostoma variatum) in Virginia

Variegate darters ( Etheostoma variatum ) were listed as endangered in Virginia in 1992. Reasons for listing included habitat degradation and concerns about current and future impacts of coal mining throughout their Virginia range. Prior to this research, little was known about variegate darter distribution, habitat use, or populations in Virginia. Two primary goals of this research were to gain knowledge about the current population ecology and the relationship between landscape-level factors (e.g., land cover changes, watershed size, isolation from other populations) on current and past variegate darter population sizes. We investigated distribution, habitat suitability, population genetics, and population size and structure of variegate darters in the upper Big Sandy River drainage, Buchanan, Dickenson, and Wise Co., Virginia. Our results indicate variegate darters are primarily found in the Levisa Fork, with highest densities and abundances between its confluence with Dismal Creek and the Virginia-Kentucky border. Sporadic occurrences in smaller tributaries to the Levisa and Tug forks indicate they exist more widely in low densities, especially near the confluence with the Tug and Levisa mainstems. Detection of variegate darters in smaller tributaries was inconsistent, with reach-level occupancy estimates varying among years. We detected young-of-year variegate darters every year we sampled, but age 1 + darters were indistinguishable from older darters based on standard length. Variegate darter population size and stability in Virginia were estimated via multiple methods, including site occupancy surveys, mark-recapture studies, and population genetic analysis. Using mark-recapture methods at five sites, we estimated overall population size in 2011 to be approximately 12,800 individuals in the 35-km reach between the Levisa Fork - Dismal Creek confluence and the Virginia-Kentucky border. Age structure seemed stable, with breeding adults and young-of-year collected annually during 2008-2011. Population genetic analysis indicated variegate darters in the Levisa Fork and its tributaries are part of a single genetic population. Historical and current genetic stability were seen in our analysis of the variegate darter population, with no genetic differentiation among riffles across the upper Levisa Fork watershed, indicating dispersal among these sites is enough to overcome random genetic drift. This population is genetically isolated from downstream populations by the dam at Fishtrap Lake, Pike Co., Kentucky, and is beginning to show genetic isolation from other nearby populations. As expected, the Virginia population is most closely related to those in the Russell Fork and Levisa Fork downstream of the dam. Regular monitoring of variegate darters in the Levisa Fork mainstem from the Dismal Creek confluence to the Virginia-Kentucky border would facilitate better understanding of normal fluctuations of population size and distribution, as well as assessments of population status. This reach encompasses the core of the variegate darter population in Virginia, and its persistence will determine long-term viability of this species. Given that little is known about long-term population trends, we suggest that annual site-occupancy and population size estimates be made at ten randomly selected riffles for at least ten years to understand normal levels of variability. Thereafter, these population parameters could be monitored bi-annually as a way to detect shrinking distribution or abundance, especially after any fish kill or other pollution event in the Levisa Fork. We further suggest that the sites upstream and downstream of the saline diffusor pipe be monitored to detect changes in the extent of the impact zone. Overall, the variegate darter population in Virginia appears stable, although primarily confined to the lower 35 km of the Levisa Fork. Nevertheless, variegate darters in Virginia remain susceptible to extirpation due to catastrophic events, both physical (chemical spill) and biological (disease outbreak or invasive species introduction).

Virginia, West Virginia↗
USGS2014

The hydrogeology of the Tully Valley, Onondaga County, New York: an overview of research, 1992-2012

Onondaga Creek begins approximately 15 miles south of Syracuse, New York, and flows north through the Onondaga Indian Nation, then through Syracuse, and finally into Onondaga Lake in central New York. Tully Valley is in the upper part of the Onondaga Creek watershed between U.S. Route 20 and the Valley Heads end moraine near Tully, N.Y. Tully Valley has a history of several unusual hydrogeologic phenomena that affected past land use and the water quality of Onondaga Creek; the phenomena are still present and continue to affect the area today (2014). These phenomena include mud volcanoes or mudboils, landslides, and land-surface subsidence; all are considered to be naturally occurring but may also have been influenced by human activity. The U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency and the Onondaga Lake Partnership, began a study of the Tully Valley mudboils beginning in October 1991 in hopes of understanding (1) what drives mudboil activity in order to remediate mudboil influence on the water quality of Onondaga Creek, and (2) land-surface subsidence issues that have caused a road bridge to collapse, a major pipeline to be rerouted, and threatened nearby homes. Two years into this study, the 1993 Tully Valley landslide occurred just over 1 mile northwest of the mudboils. This earth slump-mud flow was the largest landslide in New York in more than 70 years (Fickies, 1993); this event provided additional insight into the geology and hydrology of the valley. As the study of the Tully Valley mudboils progressed, other unusual hydrogeologic phenomena were found within the Tully Valley and provided the opportunity to perform short-term, small-scale studies, some of which became graduate student theses—Burgmeier (1998), Curran (1999), Morales-Muniz (2000), Baldauf (2003), Epp (2005), Hackett, (2007), Tamulonis (2010), and Sinclair (2013). The unusual geology and hydrology of the Tully Valley, having been investigated for more than two decades, provides the basis for this report.

New York↗
USGS1996

Instream investigations in the Beaver Creek Watershed in West Tennessee, 1991-95

The U.S. Geological Survey (USGS), in cooperation with the Tennessee Department of Agriculture, began a long-term scientific investigation in 1989 to evaluate the effect of agricultural activities on water quality and the effectiveness of agricultural best management practices in the Beaver Creek watershed, West Tennessee. In 1993 as a part of this study, the USGS, in cooperation with the Natural Resources Conservation Service, Shelby County Soil Conservation District, and the Tennessee Soybean Promotion Board, began an evaluation of the physical, chemical, biological and hydrological factors that affect water quality in streams and wetlands, and instream resource-management systems to treat agricultural nonpoint-source runoff and improve water quality. The purpose of this report is to present the results of three studies of stream and wetland investigations and a study on the transport of aldicarb from an agricultural field in the Beaver Creek watershed. A natural bottomland hardwood wetland and an artificially constructed wetland were evaluated as instream resource-management systems. These two studies showed that wetlands are an effective way to improve the quality of agricultural nonpoint-source runoff. The wetlands reduced concentrations and loads of suspended sediments, nutrients, and pesticides in the streams. A third paper documents the influence of riparian vegetation on the biological structure and water quality of a small stream draining an agricultural field. A comparison of the upper reach lined with herbaceous plants and the lower reach with mature woody vegetation showed a more stable biological community structure and Water- quality characteristics in the woody reach than in the herbaceous reach. The water-quality characteristics monitored were pH, temperature, dissolved oxygen, and specific conductance. The herbaceous reach had a greater diversity and abundance of organisms during spring and early summer, but the abundance dropped by approximately 85 percent during late summer. A fourth study describes the transport of aldicarb and its metabolites--aldicarb sulfoxide and aldicarb sulfone-in runoff at a small stream draining a cotton field. During 1991 to 1995, aldicarb and its metabolites were detected in runoff events. The highest concentrations occurred when aldicarb was applied to the field just hours before a rain storm. Aldicarb was not detectable in runoff a few weeks after application. The metabolites of aldicarb were detectable for 76 days after application. These studies demonstrate streambank vegetation and wetlands have a significant influence on stream water quality. The importance of weather conditions to herbicide application and runoff also is evident. This information can be used by resource managers to sustain and improve our Nation's streams for future generations.

Water-Resources Investigations Report↗
USGS2009

Predicting organic floc transport dynamics in shallow aquatic ecosystems: Insights from the field, the laboratory, and numerical modeling

Transport of particulate organic material can impact watershed sediment and nutrient budgets and can alter the geomorphologic evolution of shallow aquatic environments. Prediction of organic aggregate (“floc”) transport in these environments requires knowledge of how hydraulics and biota affect the entrainment, settling, and aggregation of particles. This study evaluated the aggregation and field transport dynamics of organic floc from a low‐gradient floodplain wetland with flow‐parallel ridges and sloughs in the Florida Everglades. Floc dynamics were evaluated in a rotating annular flume and in situ in the field. Under present managed conditions in the Everglades, floc is not entrained by mean flows but is suspended via biological production in the water column and bioturbation. Aggregation was a significant process affecting Everglades floc at high flume flow velocities (7.0 cm s −1 ) and during recovery from high flow; disaggregation was not significant for the tested flows. During moderate flows when floc dynamics are hydrodynamically controlled, it is possible to model floc transport using a single “operative floc diameter” that accurately predicts fluxes downstream and to the bed. In contrast, during high flows and recovery from high flows, aggregation dynamics should be simulated. When entrained by flow in open‐water sloughs, Everglades floc will be transported downstream in multiple deposition and reentrainment events but will undergo net settling when transported onto ridges of emergent vegetation. We hypothesize that net transport of material from open to vegetated areas during high flows is critical for forming and maintaining distinctive topographic patterning in the Everglades and other low‐gradient floodplains.

Water Resources Research↗
USGS1982

Guidelines for determining flood flow frequency: Bulletin #17B of the Hydrology Subcommittee

In December 1967, Bulletin No. 15, "A Uniform Technique for Determining Flood Flow Frequencies," was issued by the Hydrology Committee of the Water Resources Council. The report recommended use of the Pearson Type III distribution with log transformation of the data (log-Pearson Type III distribution) as a base method for flood flow frequency studies. As pointed out in that report, further studies were needed covering various aspects of flow frequency determinations. In March 1976, Bulletin 17, "Guidelines for Determining Flood Flow Frequency" was issued by the Water Resources Council. The guide was an extension and update of Bulletin No. 15. It provided a more complete guide for flood flow frequency analysis incorporating currently accepted technical methods with sufficient detail to promote uniform application. It was limited to defining flood potentials in terms of peak discharge and exceedance probability at locations where a systematic record of peak flood flows is available. The recommended set of procedures was selected from those used or described in the literature prior to 1976, based on studies conducted for this purpose at the Center for Research in Water Resources of the University of Texas at Austin (summarized in Appendix 14) and on studies by the Work Group on Flood Flow Frequency. The "Guidelines" were revised and reissued in June 1977 as Bulletin 17A. Bulletin 17B is the latest effort to improve and expand upon the earlier publications. Bulletin 17B provides revised procedures for weighting a station skew value with the results from a generalized skew study, detecting and treating outliers, making two station comparisons, and computing confidence limits about a frequency curve. The Work Group that prepared this revision did not address the suitability of the original distribution or the generalized skew map. Major problems are encountered when developing guides for flood flow frequency determinations. There is no procedure or set of procedures that can be adopted which, when rigidly applied to the available data, will accurately define the flood potential of any given watershed. Statistical analysis alone will not resolve all flood frequency problems. As discussed in subsequent sections of this guide, elements of risk and uncertainty are inherent in any flood frequency analysis. User decisions must be based on properly applied procedures and proper interpretation of results considering risk and uncertainty. Therefore, the judgment of a professional experienced in hydrologic analysis will enhance the usefulness of a flood frequency analysis and promote appropriate application. It is possible to standarize many elements of flood frequency analysis. This guide describes each major element of the process of defining the flood potential at a specific location in terms of peak discharge and exceedance probability. Use is confined to stations where available records are adequate to warrant statistical analysis of the data. Special situations may require other approaches. In those cases where the procedures of this guide are not followed, deviations must be supported by appropriate study and accompanied by a comparison of results using the recommended procedures. As a further means of achieving consistency and improving results, the Work Group recommends that studies be coordinated when more than one analyst is working currently on data for the same location. This recommendation holds particularly when defining exceedance probabilities for rare events, where this guide allows more latitude. Flood records are limited. As more years of record become available at each location, the determination of flood potential may change. Thus, an estimate may be outdated a few years after it is made. Additional flood data alone may be sufficient reason for a fresh assessment of the flood potential. When making a new assessment, the analyst should incorporate in his study a review of earlier estimates. Where differences appear, they should be acknowledged and explained.

Bulletin↗
USGS2020

Pavement alters delivery of sediment and fallout radionuclides to urbanstreams

Sediment from urban impervious surfaces has the potential to be an important vector for contaminants, particularly where stormwater culverts and other buried channels draining large impervious areas exit from underground pipes into open channels. To better understand urban sediment sources and their relation to fallout radionuclides, we collected samples of rainfall, urban sediment (pavement sediment, topsoil), streambank sediment, and fluvial sediment (suspended sediment and bed sediment) for 7 Be, 210 Pb ex , and 137 Cs analysis. The results indicate that each rainfall event tags pavement sediment with elevated activities of 7 Be and 210 Pb ex such that runoff from impervious surfaces in the buried channel part of the stream network contains the highest activities. Pavement sediment, because it is characteristically a thin veneer, has a small mass to rainwater ratio resulting in a greater tagging of 7 Be and 210 Pb ex activity than does topsoil on a per gram basis. An unmixing model indicated that suspended-sediment samples collected at the culvert outlet from the buried-channel network are from pavement sediment sources (45 ± 25%) with a smaller component of topsoil (22 ± 19%), and a component from streambanks (32 ± 35%) that we infer to be older channel material and subsoil eroded from within the culvert system. Downstream from the culvert, suspended sediment collected from the open-channel parts of the stream had 7 Be and 210 Pb ex activities that were substantially reduced by the contribution of sediment from streambanks (57 ± 15%), with pavement contributions decreasing to 15 (±9%) and topsoil contributing 28 (±7%). The results highlight the utility of 7 Be, 210 Pb ex , and 137 Cs as tracers of urban sediment sources, resulting in a unique radionuclide signature for urban watersheds compared to other sediment-source settings.

Maryland↗
USGS2019

Hydrologic and hydraulic analyses of selected streams in Richland County, Ohio

Hydrologic and hydraulic analyses were done for selected reaches of Clear Fork Mohican River and Cedar Fork in Richland County, Ohio. To update and expand a portion of the Federal Emergency Management Agency detailed Flood Insurance Study, the U.S. Geological Survey (USGS) and the Muskingum Watershed Conservancy District initiated a cooperative study. The study comprised an 18.6-mile reach of the Clear Fork Mohican River and a 5.9-mile reach of Cedar Fork. Historical streamflow data from the streamgage Clear Fork Mohican River at Bellville, Ohio (USGS station number 03131982) and regional regression equations were used to estimate instantaneous peak streamflows for floods with 10-, 4-, 2-, 1-, and 0.2-percent and 1-percent plus annual exceedance probabilities. The 1-percent plus flood elevation is defined by the Federal Emergency Management Agency as a flood elevation derived by using streamflows that include the average predictive error for the regression equation streamflow calculation for the Flood Risk project. This error is then added to the 1-percent annual exceedance probability flood streamflow to calculate the new 1-percent plus streamflow. The annual exceedance probability streamflows were then used in a Hydrologic Engineering Center-River Analysis System step-backwater model to determine water-surface elevation profiles and flood-inundation boundaries for the 10-, 4-, 2-, 1-, and 0.2-percent and 1-percent plus annual exceedance probability floods and a regulatory floodway along a selected reach of each stream. The Clear Fork Mohican River model was calibrated to 16 flood events by using the current stage-streamflow relation at the streamgage Clear Fork Mohican River at Bellville, Ohio (USGS station number 03131982) and a submersible pressure transducer. Flood-inundation boundaries for the 1- and 0.2-percent annual exceedance probability floods and a regulatory floodway were mapped for each stream.

Ohio↗
USGS2002

Simulation of runoff and recharge and estimation of constituent loads in runoff, Edwards aquifer recharge zone (outcrop) and catchment area, Bexar County, Texas, 1997-2000

The U.S. Geological Survey developed a watershed model (Hydrological Simulation Program—FORTRAN) to simulate runoff and recharge and to estimate constituent loads in surface-water runoff in the Edwards aquifer recharge zone (outcrop) and catchment area in Bexar County, Texas. Rainfall and runoff data collected during 1970–98 from four gaged basins in the outcrop and catchment area were used to calibrate and test the model. The calibration parameters were applied in simulations of the four calibration basins and six ungaged basins that compose the study area to obtain runoff and recharge volumes for 4 years, 1997–2000. In 1997, simulated runoff from the study area was 5.62 inches. Simulated recharge in the study area was 7.85 inches (20 percent of rainfall). In 1998, simulated runoff was 11.05 inches; simulated recharge was 10.99 inches (25 percent of rainfall). In 1999, simulated runoff was 0.66 inch; simulated recharge was 3.03 inches (19 percent of rainfall). In 2000, simulated runoff was 5.29 inches; simulated recharge was 7.19 inches (21 percent of rainfall). During 1997– 2000, direct infiltration of rainfall accounted for about 56 percent of the total Edwards aquifer recharge in Bexar County. Streamflow losses contributed about 37 percent of the recharge; flood impoundment contributed 7 percent. The simulated runoff volumes were used with event-mean-concentration data from basins in the study area and from other Bexar County basins to compute constituent loads and yields for various land uses. Annual loads for suspended solids, dissolved solids, dissolved nitrite plus nitrate nitrogen, and total lead were consistently largest from undeveloped land and smallest from commercial land or transportation corridors. Annual loads and yields varied with rainfall, with the maximum loads produced in the wettest year (1998) and the minimum loads produced in the driest year (1999).

Texas↗
USGS2006

Effects of streambank fencing of pasture land on benthic macroinvertebrates and the quality of surface water and shallow ground water in the Big Spring Run basin of Mill Creek watershed, Lancaster County, Pennsylvania, 1993-2001

Streambank fencing along stream channels in pastured areas and the exclusion of pasture animals from the channel are best-management practices designed to reduce nutrient and suspended-sediment yields from drainage basins. Establishment of vegetation in the fenced area helps to stabilize streambanks and provides better habitat for wildlife in and near the stream. This study documented the effectiveness of a 5- to 12-foot-wide buffer strip on the quality of surface water and near-stream ground water in a 1.42-mi2 treatment basin in Lancaster County, Pa. Two miles of stream were fenced in the basin in 1997 following a 3- to 4-year pre-treatment period of monitoring surface- and ground-water variables in the treatment and control basins. Changes in surface- and ground-water quality were monitored for about 4 years after fence installation. To alleviate problems in result interpretation associated with climatic and hydrologic variation over the study period, a nested experimental design including paired-basin and upstream/downstream components was used to study the effects of fencing on surface-water quality and benthic-macroinvertebrate communities. Five surface-water sites, one at the outlet of a 1.77-mi2 control basin (C-1), two sites in the treatment basin (T-3 and T-4) that were above any fence installation, and two sites (one at an upstream tributary site (T-2) and one at the outlet (T-1)) that were treated, were sampled intensively. Low-flow samples were collected at each site (approximately 25-30 per year at each site), and stormflow was sampled with automatic samplers at all sites except T-3. For each site where stormflow was sampled, from 35 to 60 percent of the storm events were sampled over the entire study period. Surface-water sites were sampled for analyses of nutrients, suspended sediment, and fecal streptococcus (only low-flow samples), with field parameters (only low-flow samples) measured during sample collection. Benthic-macroinvertebrate samples were collected in May and September of each year; samples were collected at the outlet of the control and treatment basins and at three upstream sites, two in the treatment basin and one in the control basin. For each benthic-macroinvertebrate sample: Stream riffles and pools were sampled using the kick-net method; habitat was characterized using Rapid Bioassessment Protocols (RBP); water-quality samples were collected for nutrients and suspended sediment; stream field parameters were measured; and multiple biological metrics were calculated. The experimental design to study the effects of fencing on the quality of near-stream shallow ground water involved a nested well approach. Two well nests were in the treatment basin, one each at surface-water sites T-1 and T-2. Within each well nest, the data from one deep well and three shallow wells (no greater than 12 ft deep) were used for regional characterization of ground-water quality. At each site, two of the shallow wells were inside the eventual fence (treated wells); the other shallow well was outside the eventual fence (control well). The wells were sampled monthly, primarily during periods with little to no recharge, for laboratory analysis of nutrients and fecal streptococcus; field parameters of water quality also were measured.

Pennsylvania↗
USGS2015

Water-quality conditions and suspended-sediment transport in the Wilson and Trask Rivers, northwestern Oregon, water years 2012–14

In October 2011, the U.S. Geological Survey began investigating and monitoring water-quality conditions and suspended-sediment transport in the Wilson and Trask Rivers, northwestern Oregon. Water temperature, specific conductance, turbidity, and dissolved oxygen were measured every 15–30 minutes in both streams using real-time instream water-quality monitors. In conjunction with the monitoring effort, suspended-sediment samples were collected and analyzed to model the amount of suspended sediment being transported by each river. Over the course of the 3-year study, which ended in September 2014, nearly 600,000 tons (t) of suspended-sediment material entered Tillamook Bay from these two tributaries. Each year of the study, the Wilson River transported between 80,300 and 240,000 t of suspended sediment, while the Trask River contributed between 28,200 and 69,900 t. The suspended-sediment loads observed during the study were relatively small because streamflow conditions were routinely lower than normal between October 2011 and September 2014. Only one storm had a recurrence interval between a 2- and 5-year event. Every other storm produced streamflows equivalent to what would be classified as a 1- or 2-year event. Because most sediment moves during high flows, the lack of heavy rainfall and elevated streamflows muted any high sediment loads. Along with assessing suspended-sediment transport, the U.S. Geological Survey also monitored instream water quality. This monitoring was used to track instream conditions and relate them to water temperature, dissolved oxygen, and sedimentation issues for the Wilson and Trask Rivers. Stream temperatures in the Wilson and Trask Rivers exceeded the temperature standard for cold-water habitat. Water temperatures at both streams exceeded the standard for more than 30 percent of the year, as stream temperatures increased above the seasonal 13 degrees Celsius (°C) (seasonal core cold-water habitat) and 16 °C (salmon and steelhead [ Oncorhynchus mykiss ] spawning) thresholds. Conversely, dissolved oxygen concentrations rarely decreased to less than the absolute water-quality criterion of 8 milligrams per liter for cold-water streams. Results from this study will provide resource managers insight into the seasonality of water-quality conditions and the extent of suspended-sediment transport in the Wilson and Trask Rivers. The data are useful for establishing a baseline and for maintaining best-use land management practices and possibly for aiding in prioritization of restoration actions for both rivers and their respective watersheds.

Oregon↗
USGS2006

Geochemical Characterization of Mine Waste, Mine Drainage, and Stream Sediments at the Pike Hill Copper Mine Superfund Site, Orange County, Vermont

The Pike Hill Copper Mine Superfund Site in the Vermont copper belt consists of the abandoned Smith, Eureka, and Union mines, all of which exploited Besshi-type massive sulfide deposits. The site was listed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004 due to aquatic ecosystem impacts. This study was intended to be a precursor to a formal remedial investigation by the USEPA, and it focused on the characterization of mine waste, mine drainage, and stream sediments. A related study investigated the effects of the mine drainage on downstream surface waters. The potential for mine waste and drainage to have an adverse impact on aquatic ecosystems, on drinking- water supplies, and to human health was assessed on the basis of mineralogy, chemical concentrations, acid generation, and potential for metals to be leached from mine waste and soils. The results were compared to those from analyses of other Vermont copper belt Superfund sites, the Elizabeth Mine and Ely Copper Mine, to evaluate if the waste material at the Pike Hill Copper Mine was sufficiently similar to that of the other mine sites that USEPA can streamline the evaluation of remediation technologies. Mine-waste samples consisted of oxidized and unoxidized sulfidic ore and waste rock, and flotation-mill tailings. These samples contained as much as 16 weight percent sulfides that included chalcopyrite, pyrite, pyrrhotite, and sphalerite. During oxidation, sulfides weather and may release potentially toxic trace elements and may produce acid. In addition, soluble efflorescent sulfate salts were identified at the mines; during rain events, the dissolution of these salts contributes acid and metals to receiving waters. Mine waste contained concentrations of cadmium, copper, and iron that exceeded USEPA Preliminary Remediation Goals. The concentrations of selenium in mine waste were higher than the average composition of eastern United States soils. Most mine waste was potentially acid generating because of paste-pH values of less than 4 and negative net-neutralization potentials (NNP). The processed flotation-mill tailings, however, had a near neutral paste pH, positive NNP, and a few weight percent calcite. Leachate tests indicated that elements and compounds such as Al, Cd, Cu, Fe, Mn, Se, SO4, and Zn were leached from mine waste in concentrations that exceeded aquatic ecosystem and drinking-water standards. Mine waste from the Pike Hill mines was chemically and mineralogically similar to that from the Elizabeth and Ely mines. In addition, metals were leached and acid was produced from mine waste from the Pike Hill mines in comparable concentrations to those from the Elizabeth and Ely mines, although the host rock of the Pike Hill deposits contains significant amounts of carbonate minerals and, thus, a greater acid-neutralizing capacity when compared to the host rocks of the Elizabeth and Ely deposits. Water samples collected from unimpacted parts of the Waits River watershed generally contained lower amounts of metals compared to water samples from mine drainage, were alkaline, and had a neutral pH, which was likely because of calcareous bedrock. Seeps and mine pools at the mine site had acidic to neutral pH, ranged from oxic to anoxic, and generally contained concentrations of metals, for example, aluminum, cadmium, copper, iron, and zinc, that exceeded aquatic toxicity standards or drinking-water standards, or both. Surface waters directly downstream of the Eureka and Union mines were acidic, as indicated by pH values from 3.1 to 4.2, and contained high concentrations of some elements including as much as 11,400 micrograms per liter (?g/L) Al, as much as 22.9 ?g/L Cd, as much as 6,790 ?g/L Cu, as much as 23,300 ?g/L Fe, as much as 1,400 ?g/L Mn, and as much as 3,570 ?g/L Zn. The concentrations of these elements exceeded water-quality guidelines. Generally, in surface waters, the pH increased and the concentrations of these elemen

Scientific Investigations Report↗
USGS2024

Tire-derived contaminants 6PPD and 6PPD-Q: Analysis, sample handling, and reconnaissance of United States stream exposures

The environmental ubiquity of tire and road wear particles (TRWP) underscores the need to understand the occurrence, persistence, and environmental effects of tire-related chemicals in aquatic ecosystems. One such chemical is 6PPD-quinone (6PPD-Q), a transformation product of the tire antioxidant 6PPD. In urban stormwater runoff 6PPD-Q can exceed acute toxicity thresholds for several salmonid species and is being implicated in significant coho salmon losses in the Pacific Northwest. There is a critical need to understand the prevalence of 6PPD-Q across watersheds to identify habitats heavily affected by TRWPs. We conducted a reconnaissance of 6PPD and 6PPD-Q in surface waters across the United States from sites (N = 94) with varying land use (urban, agricultural, and forested) and streamflow to better understand stream exposures. A rapid, low-volume direct-inject, liquid chromatography mass spectrometry method was developed for the quantitation of 6PPD-Q and screening for 6PPD. Laboratory holding times, bottle material, headspace, and filter materials were investigated to inform best practices for 6PPD-Q sampling and analysis. Glass bottles with PTFE-lined caps minimized sorption and borosilicate glass fiber filters provided the highest recovery. 6PPD-Q was stable for at least 5 months in pure laboratory solutions and for 75 days at 5 °C with minimal headspace in the investigated surface water and stormwaters. Results also indicated samples can be frozen to extend holding times. 6PPD was not detected in any of the 526 analyzed samples and there were no detections of 6PPD-Q at agricultural or forested sites. 6PPD-Q was frequently detected in stormwater (57%, N = 90) and from urban impacted sites (45%, N = 276) with concentrations ranging from 0.002 to 0.29 μg/L. The highest concentrations, above the lethal level for coho salmon, occurred during stormwater runoff events. This highlights the importance of capturing episodic runoff events in urban areas near ecologically relevant habitat or nursery grounds for sensitive species.

Chemosphere↗
USGS1999

Geomorphological assessment of sediment contamination in an urban stream system

Little is known about the influence of fluvial-geomorphological features on the dispersal of sediment-related contaminants in urban drainage systems. This study investigates the relation between reach-scale geomorphological conditions and network-scale patterns of trace-element concentrations in a partially urbanized stream system in East-Central Illinois, USA Robust statistical analysis of bulk sediment samples reveals levels of Cr, Cu, Pb, Ni, and Zn exceed contamination thresholds in the portion of the watershed in close proximity to potential sources of pollution-in this case storm-sewer outfalls. Although trace-element concentrations decrease rapidly downstream from these sources, substantial local variability in metal levels exists within contaminated reaches. This local variability is related to reach-scale variation in fluvial-geomorphic conditions, which in turn produces variation in the degree of sorting and organic-matter content of bed material. Metal concentrations at contaminated sites also exhibit considerable variability over time. Analytical tests on specific size fractions of material collected at a highly contaminated site indicate that Cr and Ni are concentrated in the 0.063 to 0.250 mm fraction of the sediment. This fraction also has elevated concentration of Zr. SEM analysis shows that the fine sand fraction contains shards of stainless steel within a matrix of zircon sand, an industrial material associated with a nearby alloy casting operation. Samples of suspended load and bedload at the contaminated site also have elevated amounts of trace metals, but concentrations of Ni and Cr in the bedload are less than concentrations in the bed material, suggesting that these trace elements are relatively immobile. Off the other hand, amounts of CU and Zn in the bedload exceed concentrations in the bed material, implying that these trace metals are preferentially mobilized during transport events.

Applied Geochemistry↗