SEARCH · Geology Reports

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

USGS2012

Modeling groundwater flow and quality

In most areas, rocks in the subsurface are saturated with water at relatively shallow depths. The top of the saturated zone—the water table—typically occurs anywhere from just below land surface to hundreds of feet below the land surface. Groundwater generally fills all pore spaces below the water table and is part of a continuous dynamic flow system, in which the fluid is moving at velocities ranging from feet per millennia to feet per day (Fig. 33.1). While the water is in close contact with the surfaces of various minerals in the rock material, geochemical interactions between the water and the rock can affect the chemical quality of the water, including pH, dissolved solids composition, and trace-elements content. Thus, flowing groundwater is a major mechanism for the transport of chemicals from buried rocks to the accessible environment, as well as a major pathway from rocks to human exposure and consumption. Because the mineral composition of rocks is highly variable, as is the solubility of various minerals, the human-health effects of groundwater consumption will be highly variable.

Book chapter↗

USGS1949

Heavy mineral zonation of Cretaceous and Tertiary rocks of the central area of northern Alaska

This report presents the general conclusions pertaining to the correlation of Cretaceous and Tertiary rocks in test wells and outcrops in the central area of northern Alaska (fig. 1) by means of heavy minerals. Approximately 1.000 drill and outcrop samples have been studied. In order to relate the materiel here presented to the regional geologic picture of the central area, the restored facies cross-sections A-A' and B-B' of T.G. Payne 1/ are used as a basis for the graphic presentation of the heavy mineral zonation. Section C-C' of Payne is not used because most of it lies outside the area treated in this report and because of new geological and geophysical interpretations in the Barrow area as the result of recent exploration. Instead, the heavy mineral zonation along a somewhat different section C-C' (see fig. 1) is discussed but not illustrated.

Alaska↗

USGS1980

Evaporite encrustations and sulphide oxidation products from the southern Antarctic peninsula.

White evaporite encrustations collected from 66 sites scattered over 30 000km2 of S.Antarctic Peninsula are dominantly gypsum and calcite, and subordinate aragonite and thenardite. Natrojarosite occurs as locally developed yellow surface stains on c30% of the white encrustations examined. Water, which forms by the melting of snow blown into cracks in highly fractured rocks by ground blizzards, dissolves soluble ions from minerals in these rocks as it percolates into them. The white encrustations appear to be deposited when this water later rises to the surface by capillary action and evaporates.-from Author Antarctica chemical weathering evaporites sulphide oxidation.

New Zealand Journal of Geology and Geophysics↗

USGS1974

Ground water in the Corvallis-Albany area, central Willamette Valley, Oregon

The Corvallis-Albany area is part of the alluvial plain that lies between the Cascade and Coast Ranges in the central Willamette Valley in northwestern Oregon. As used in this report, the Corvallis-Albany area consists of approximately 210 square miles and includes a part of the lower foothills of the Coast and Cascade Ranges. Volcanic and marine sedimentary units exposed in the foothills range in age from Eocene to Oligocene or Miocene. The volcanic rocks are primarily pillow lavas and basalt flows, which yield only small quantities of water generally adequate for domestic and stock use. Marine-deposited sandstone, siltstone, and shale of the older sedimentary units are fine grained, poorly permeable, and generally yield small volumes of water to wells. In the valley plain the older units are overlain by Pleistocene and Holocene alluvial deposits. The alluvial deposits (sand and gravel) of the valley plain contain the most productive aquifers in the area and are considered to be the only units feasible for large-scale development of ground-water supplies. Aquifers in the area are recharged principally by direct infiltration of precipitation. Most of the precipitation (about 38 in. per yr avg) occurs during late autumn and winter. Ground water is discharged naturally from the area by seepage and spring flow to streams, by evapotranspiration, by underflow, and artificially through wells. During 1971 the seasonal decline of water levels from winter to late summer averaged about 10 feet for the alluvial deposits. The seasonal change of storage in that year was estimated to be about 130,000 acre-feet. Of this volume, about 14,000 acre-feet was pumped from wells; the rest (about 116,000 acre-feet) was discharged through seeps and springs by evapotranspiration. The difference between pumpage and natural discharge indicates that a great quantity of additional water is available for development. The storage capacity of the alluvial aquifers in the area is estimated to be about 750,000 acre-feet between depths of 10 and 100 feet. Ground water from the alluvial deposits is chemically suitable for all uses, as is most of the water from perched-water bodies in the older sedimentary and volcanic rocks. However, the mineral content of water from the older sedimentary rocks, particularly from deeper producing zones in the valley plain, is greater than that from the alluvial deposits. Locally, some of the water from the older rocks is too saline for general use. Analysis of water samples for coliform bacteria indicates that ground-water pollution exists in parts of the Corvallis-Albany area. Further study is necessary to document fully the nature and extent of pollution.

Oregon↗

USGS1997

Isotopic and trace element compositions of upper mantle and lower crustal xenoliths, Cima volcanic field, California: Implications for evolution of the subcontinental lithospheric mantle

Ultramafic and mafic xenoliths from the Cima volcanic field, southern California, provide evidence of episodic modification of the upper mantle and underplating of the crust beneath a portion of the southern Basin and Range province. The upper mantle xenoliths include spinel peridotite and anhydrous and hydrous pyroxenite, some cut by igneous-textured pyroxenite-gabbro veins and dikes and some by veins of amphibole ?? plagioclase. Igneous-textured pyroxenites and gabbros like the dike rocks also occur abundantly as isolated xenoliths inferred to represent underplated crust. Mineral and whole rock trace element compositions among and within the different groups of xenoliths are highly variable, reflecting multiple processes that include magma-mantle wall rock reactions, episodic intrusion and it filtration of basaltic melts of varied sources into the mantle wall rock, and fractionation. Nd, Sr, and Pb isotopic compositions mostly of clinopyroxene and plagioclase mineral separates show distinct differences between mantle xenoliths (??Nd = -5.7 to +3.4; 87Sr/86Sr = 0.7051 - 0.7073; 206Pb/204Pb = 19.045 - 19.195) and the igneous-textured xenoliths (??Nd = +7.7 to +11.7; 87Sr/86Sr = 0.7027 - 0.7036 with one carbonate-affected outlier at 0.7054; and 206Pb/204Pb = 18.751 - 19.068), so that they cannot be related. The igneous-textured pyroxenites and gabbros are similar in their isotopic compositions to the host basaltic rocks, which have ??Nd of+5.1 to +9.3; 87Sr/86Sr of 0.7028 - 0.7050, and 206Pb/204Pb of 18.685 - 21.050. The igneous-textured pyroxenites and gabbros are therefore inferred to be related to the host rocks as earlier cogenetic intrusions in the mantle and in the lower crust. Two samples of peridotite, one modally metasomatized by amphibole and the other by plagioclase, have isotopic compositions intermediate between the igneous-textured xenoliths and the mantle rock, suggesting mixing, but also derivation of the metasomatizing magmas from two separate and distinct sources. Sm-Nd two-mineral "isochrons" yield apparent ages for petrographically identical rocks believed to be coeval ranging from -0 to 113 ?? 26 Ma, indicating the unreliability of dating these rocks with this method. Amphibole and plagioclase megacrysts are isotopically like the host basalts and probably originate by mechanical breakup of veins comagmatic with the host basaltic rocks. Unlike other Basin and Range localities, Cima Cr-diopside group isotopic compositions do not overlap with those of the host basalts. Copyright 1997 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS1969

Age and chemistry of mesozoic and tertiary plutonic rocks in south-central Alaska

On the basis of potassium-argon mineral ages, plutonic rocks in an area of approximately 22,000 square miles in the southern Alaska Range and the Aleutian Range can be assigned to age groups that show differences in chemical characteristics and geographic distribution. The plutonic groups are Early and Middle Jurassic, Late Cretaceous and early Tertiary, and middle Tertiary in age. Most of the plutonic rocks in the Aleutian Range south of Iliamna Lake appear to be Jurassic, but north of Iliamna Lake, Jurassic plutonic rocks seem to be restricted to a belt on the southeast side of the Chigmit Mountains—Alaska Range. In the western or northwestern part of the Alaska Range north of Iliamna Lake, only Cretaceous and Tertiary plutonic rocks have been found. Rocks rich in K-feldspar are predominant in the Cretaceous and Tertiary plutons, but subordinate in the Jurassic plutons. Most of the mineralization in the region is associated with the Cretaceous and Tertiary plutons.

GSA Bulletin↗

USGS2024

Considerations and applications of the illite/smectite geothermometer in hydrocarbon-bearing rocks of Miocene to Mississippian age

Empirical relationships between clay mineral transformations and temperature provide a basis for the use of clay minerals as geothermometers. Clay-mineral geothermometry has been applied mainly to diagenetic, hydrothermal, and contact- and burial-metamorphic settings to better understand the thermal histories of migrating fluids, hydrocarbon source beds, and ore and mineral formation. Quantitatively, the most important diagenetic clay mineral reaction in sedimentary rocks is the progressive transformation of smectite to illite via mixed-layer illite/smectite (I/S). Changes in both the illite/smectite ratio and ordering of I/S, as determined from X-ray powder diffraction profiles, correlate with changes in temperature due to burial depth. Although the smectite-to-illite reaction may be influenced by several factors, reaction progress appears to be strongly controlled by temperature. Studies show that the model proposed by Hoffman and Hower in 1979 is applicable in burial diagenetic settings from about 5 to 330 Ma, and includes most rocks about Miocene to Mississippian in age. Reliability of the I/S geothermometer is, however, dependent upon a good understanding of the rock's original clay-mineral composition. Changes in the ordering of I/S are particularly useful in the exploration for hydrocarbons because of the common coincidence between the temperatures for the conversion from random-to-ordered I/S and those for the onset of peak, or main phase, oil generation. Here, the utility of the I/S geothermometer is reviewed in hydrocarbon-bearing rocks of Miocene to Mississippian age. Using three common applications, the I/S geothermometer is compared to other mineral geothermometers, organic maturation indices, and grades of indigenous hydrocarbons. Good agreement between changes in ordering of I/S and calculated maximum burial temperatures or hydrocarbon maturity suggests that I/S is a reliable semiquantitative geothermometer and an excellent measures of thermal maturity.

Clays and Clay Minerals↗

USGS2004

Ad Duwayhi, Saudi Arabia: Geology and geochronology of a neoproterozoic intrusion-related gold system in the Arabian shield

The Ad Duwayhi gold deposit, located in the east-central part of the Arabian shield, is the newest gold discovery in Saudi Arabia. Exploration to date has identified a gold resource of greater than 1 million ounces (oz) with significant potential for expansion. Gold mineralization was closely associated, in time and space, with emplacement of a late- to postorogenic, intracrustal, northwest-oriented granite body (659 ± 7 Ma) and comagmatic square quartz porphyry (646 ± 11 Ma), a hypabyssal and perhaps younger phase of the granite. Mineralization was largely confined to northeast-striking, southeast-dipping fault zones. Hydrothermal alteration consisted of early biotitic alteration overprinted by sericitic alteration. Sericitic alteration was coincident with gold mineralization and produced a quartz-sericite-carbonate-pyrite-rutile mineral assemblage, found both as vein fill and wall-rock alteration products. Mineralization styles, in the following general paragenetic sequence, include (1) quartz-molybdenite veins in and near the granite stock, (2) low-grade gold-bearing quartz vein breccia in and along the margins of the granite stock, (3) gold-bearing stockwork and sheeted quartz veins, and (4) massive to banded gold-rich tabular quartz veins. The gold-bearing stockwork, sheeted, and tabular veins are generally spatially associated with square quartz porphyry dikes and more distal to the granite stock. Mineralized zones at Ad Duwayhi are characterized by low sulfide and base metal content and gold/silver ratios of approximately 6/1. Gold shows no significant correlation with other metals, except lead, and moderate correlation with silver. Re-Os dating of molybdenite from a quartz-molybdenite vein and a tabular quartz vein with cogenetic gold produced robust ages of 655.6 ± 2.7 and 649.9 ± 2.3 Ma, respectively, documenting that gold mineralization and crystallization of granite and square quartz porphyry were, within uncertainty, coeval events. This age correlation combined with granite textural features, the presence of unidirectional solidification textures in granite and square quartz porphyry, and the nature and time-space distribution of mineralization styles, all indicate that mineralization evolved in and near the interface between a crystallizing magma and the surrounding rocks and, thus, is consistent with an intrusion-related genesis. In light of our findings at Ad Duwayhi, a reassessment of similar intrusion-hosted deposits in the Arabian shield is warranted, and areas of late- to postorogenic plutonism, particularly in the Afif composite terrane, should be considered prospective for intrusion-related gold systems.

Economic Geology↗

USGS1994

Isotopic tracers of gold deposition in Paleozoic limestones, southern Nevada

Strontium isotopic analyses of barren and mineralized Paleozoic carbonate rocks show that hydrothermal fluids added radiogenic strontium (87Sr) to the mineralized zones. At Bare Mountain, samples collected from mineralized areas have ??87Srt values (per mil deviation from primary marine values) ranging from +3.0 to +23.0 (mean of this log-normal distribution is +7.0), whereas unmineralized carbonate rocks have ??87Srt values of -0.6 to +2.9 (mean of +1.07??1.03). In other ranges (Striped Hills, Spring Mountains, and ranges in the vicinity of Indian Springs Valley), ??87Srt values of the unmineralized carbonate rocks are even lower and virtually indistinguishable from primary marine values. This correlation of elevated ??87Srt values with mineralized zones provided a useful technique for assessing the mineral potential of the Paleozoic basement beneath Yucca Mountain, and may find broader use in mineral exploration in the Basin and Range province as a whole.

Conference Paper↗

USGS2025

Alteration mapping in granitic gneiss using handheld geophysical and geochemical instruments: Implications for iron oxide-apatite and rare earth elements exploration

The Adirondack Mountains of New York, U.S.A. contain iron oxide-apatite (IOA) mineral deposits with variable concentrations of rare earth elements (REE). The IOA mineral deposits are typically hosted in the Lyon Mountain Granite Gneiss and are spatially correlated with extensive Na metasomatism (albitization) of the surrounding country rocks, although some mineral deposits also occur in metagabbro, paragneiss, and anorthosite hosts. The location of albitization zones is key to finding new IOA mineral deposits and better understanding the mineralization processes associated with their genesis. However, the Na alteration zones are generally not visibly identifiable in outcrop or hand specimens because the color and textural changes are subtle and are thus difficult to map. Here, we discuss the results from testing two spectroscopic techniques (handheld, field gamma-ray spectroscopy, and portable X-ray fluorescence (pXRF)) to characterize albitization zones surrounding IOA mineral deposits. The gamma-ray and pXRF spectrometers successfully distinguished the relative intensity of alteration in the Lyon Mountain Granite Gneiss based on the K abundance. The measured K content decreases towards the IOA mineral deposits, and the magnitude and width of the gradient are similar along the strike of each mineral deposit. Elevated Th and U values are present in host rocks adjacent to REE-bearing IOA mineral deposits. The pXRF and gamma-ray spectrometer K values are remarkably consistent with laboratory-based, whole-rock XRF compositional data and, therefore, useful for semi-quantitative analysis. Notably, albitization aureoles are consistent around REE-rich and REE-poor mineral deposits, suggesting that saline fluids are essential for the petrogenesis of IOA mineral deposits but may not be critical to REE mineralization. Ultimately, this study demonstrates the utility of handheld gamma-ray and pXRF spectrometry for identifying otherwise cryptic albitization gradients associated with IOA mineral deposits in granitic gneiss.

New York↗

USGS2009

Acid neutralizing capacity and leachate results for igneous rocks, with associated carbon contents of derived soils, Animas River AML site, Silverton, Colorado

Mine planning efforts have historically overlooked the possible acid neutralizing capacity (ANC) that local igneous rocks can provide to help neutralize acidmine drainage. As a result, limestone has been traditionally hauled to mine sites for use in neutralizing acid drainage. Local igneous rocks, when used as part of mine life-cycle planning and acid mitigation strategy, may reduce the need to transport limestone to mine sites because these rocks can contain acid neutralizing minerals. Igneous hydrothermal events often introduce moderately altered mineral assemblages peripheral to more intensely altered rocks that host metal-bearing veins and ore bodies. These less altered rocks can contain ANC minerals (calcite-chlorite-epidote) and are referred to as a propylitic assemblage. In addition, the carbon contents of soils in areas of new mining or those areas undergoing restoration have been historically unknown. Soil organic carbon is an important constituent to characterize as a soil recovery benchmark that can be referred to during mine cycle planning and restoration. This study addresses the mineralogy, ANC, and leachate chemistry of propylitic volcanic rocks that host polymetallic mineralization in the Animas River watershed near the historical Silverton, Colorado, mining area. Acid titration tests on volcanic rocks containing calcite (2 – 20 wt %) and chlorite (6 – 25 wt %), have ANC ranging from 4 – 146 kg/ton CaCO3 equivalence. Results from a 6-month duration, kinetic reaction vessel test containing layered pyritic mine waste and underlying ANC volcanic rock (saturated with deionized water) indicate that acid generating mine waste (pH 2.4) has not overwhelmed the ANC of propylitic volcanic rocks (pH 5.8). Sequential leachate laboratory experiments evaluated the concentration of metals liberated during leaching. Leachate concentrations of Cu-Zn-As-Pb for ANC volcanic rock are one-to-three orders of magnitude lower when compared to leached solution from mine waste used in the kinetic reaction vessel test. This finding suggests that mine waste and not ANC rock may generate the majority of leachable metals in a field scenario. The organic carbon content of naturally reclaimed soils derived from weathering of propylitically-altered andesite was determined in catchments where ANC studies were initiated. Soils were found to have total carbon concentrations (TOC) that exceed global average soil TOC abundances by as much as 1.5 – 5 times. These data support an environmental management system involving use of ANC rocks as part of life-cycle mine planning to reduce post-mine closure acid mitigation measures. Carbon contents of undisturbed soils in mined catchments can possibly be used to validate post-reclamation success and help quantify carbon sequestration for CO2 emission offset trading as carbon markets mature.

Colorado↗

USGS1978

The architecture of the porphyry-metal system as a prospecting stratagem in the Southern Rocky Mountains

A model of the porphyry-metal system characteristic of the consanguineous Cretaceous and Tertiary igneous rocks and associated ores of the southern Rocky Mountains is constructed from the bits and pieces exposed in the Colorado mineral belt and the San Juan volcanic field. Hydrothermally altered rocks in a part of the areas of mineralized rock associated with the Platoro caldera are matched against the model, to locate and to characterize latent mineral deposits for optimal prospecting and exploration. The latent deposits are two stockwork molybdenite deposits (porphyry-molybdenum) and one or two copper-gold-silver chimney deposits.

Open-File Report↗

USGS2009

Experimental alteration of artificial and natural impact melt rock from the Chesapeake Bay impact structure

The alteration or transformation of impact melt rock to clay minerals, particularly smectite, has been recognized in several impact structures (e.g., Ries, Chicxulub, Mj??lnir). We studied the experimental alteration of two natural impact melt rocks from suevite clasts that were recovered from drill cores into the Chesapeake Bay impact structure and two synthetic glasses. These experiments were conducted at hydrothermal temperature (265 ??C) in order to reproduce conditions found in meltbearing deposits in the first thousand years after deposition. The experimental results were compared to geochemical modeling (PHREEQC) of the same alteration and to original mineral assemblages in the natural melt rock samples. In the alteration experiments, clay minerals formed on the surfaces of the melt particles and as fine-grained suspended material. Authigenic expanding clay minerals (saponite and Ca-smectite) and vermiculite/chlorite (clinochlore) were identified in addition to analcime. Ferripyrophyllite was formed in three of four experiments. Comparable minerals were predicted in the PHREEQC modeling. A comparison between the phases formed in our experiments and those in the cores suggests that the natural alteration occurred under hydrothermal conditions similar to those reproduced in the experiment. ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗

USGS1976

Exploration for porphyry copper deposits in Pakistan using digital processing of Landsat-1 data

Rock-type classification by digital-computer processing of Landsat-1 (formerly ERTS-1) multispectral scanner data has been used to select 23 prospecting targets in the Chagai District, Pakistan, 5 of which have proved to be large areas of hydrothermally altered porphyry containing pyrite. The known porphyry copper deposit at Saindak was used as a control area. Empirical maximum and minimum apparent reflectance limits were selected for each multispectral scanner band in each rock type classified, and a relatively unrefined classification table was prepared. Where the values for all four bands fitted within the limits designated for a particular class, a symbol for the presumed rock type was printed by the computer at the appropriate location; these symbols formed a classification map. Drainage channels, areas of mineralized quartz diorite, areas of pyrite-rich rock, and the approximate limit of propylitic alteration were very well delineated on the computer-generated map of the test area. The classification method was then used to evaluate 2,100 km 2 in the Mashki Chah region, east of the test area, and a partial check of the results was made in the field. The results of the experiment show that outcrops of hydrothermally altered and mineralized rock can be identified from Landsat-1 data under favorable conditions. The empirical method of digital computer classification of the multispectral scanner data was relatively unrefined and rapid. The five mineralized prospecting sites identified are in locations that I would not have selected as favorable on the basis of geologic knowledge or photogeologic interpretation at the time of the investigation.

Journal of Research of the U.S. Geological Survey↗

USGS2016

Aeromagnetic map of northwest Utah and adjacent parts of Nevada and Idaho

Two aeromagnetic surveys were flown to promote further understanding of the geology and structure in northwest Utah and adjacent parts of Nevada and Idaho by serving as a basis for geophysical interpretations and by supporting geological mapping, water and mineral resource investigations, and other topical studies. Although this area is in general sparsely populated, (except for cities and towns along the Wasatch Front such as Ogden and Brigham City), it encompasses metamorphic core complexes in the Grouse Creek and Raft River Mountains (figure 1) of interest to earth scientists studying Cenozoic extension. The region was shaken in 1909 and 1934 by M6+ earthquakes east of the Hansel Mountains (Doser, 1989; Arabasz and others, 1994); damage from the 1934 earthquake occurred as far east as Logan, Utah (http:// www.seis.utah.edu/lqthreat/nehrp_htm/1934hans/n1934ha1. shtml#urbse). The presence of Quaternary shield volcanoes and bimodal Pleistocene volcanism in Curlew Valley (Miller and others, 1995; Felger and others, 2016) as well as relatively high temperature gradients encountered in the Indian Cove drillhole in the north arm of Great Salt Lake (Blackett and others, 2014) may indicate some potential for geothermal energy development in the area (Miller and others, 1995). The area also hosts four significant mining districts, in the northern Pilot Range, the Goose Creek Mountains in the northwest corner of the map, the southern end of the Promontory Mountains, and the southwest part of the Raft River Mountains, although production notably waned after World War II (Doelling, 1980). Other prospects of interest include those in the southern Grouse Creek Mountains, Silver Island, and the northern Newfoundland Mountains. Large areas of northwest Utah are covered by young, surficial deposits or by Great Salt Lake or are down-dropped into deep Cenozoic basins, making extrapolation of bedrock geology from widely spaced exposures difficult or tenuous (figure 1). Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Magnetic data reflect magnetization variations within the crust and are well suited for mapping the distribution of mafic igneous rocks, although felsic igneous rocks, some mineralized zones, and other rock types also can produce measurable magnetic anomalies. For these reasons, the U.S. Geological Survey (USGS) and Utah Geological Survey (UGS) contracted for the collection of aeromagnetic data in this area.

Idaho, Nevada, Utah↗

USGS1979

Spectra of altered rocks in the visible and near infrared

Visible and near-infrared (0.35 to 2.5 mu m) bidirectional reflection spectra were recorded for a suite of well-characterized hydrothermally altered rock samples. The spectra typically display well-defined bands caused by both electronic and vibrational processes in the individual mineral constituents.Electronic transitions in the iron-bearing constituent minerals produce diagnostic minima near 0.43, 0.65, 0.85, and 0.93 mu m. Vibrational transitions in clay and water-bearing mineral constituents typically produce characteristic single or multiple features over limited spectral ranges near 1.4, 1.75, 1.9, 2.2, and 2.35 mu m. The most abundant feature-producing minerals present in these rocks are hematite, goethite, and alunite, while others frequently present are jarosite, kaolinite, potassium micas, pyrophyllite, montmorillonite, diaspore, and gypsum.This study shows that visible-near infrared spectrometry is a reliable and rapid technique for detecting and identifying clay minerals and alunite in rocks. Because these minerals are important constituents of altered rocks, the feasibility of using the visible and near infrared for detecting altered rocks by remote-sensing techniques is indicated. The spectral region near 2.2 mu m is particularly important for this purpose.

Nevada↗

USGS1979

Possible uranium mineralization, Mineral Mountains, Utah

The Mineral Mountains block in west-central Utah is a horst whose core stands structurally high relative to all nearby basin-and-range fault blocks. Rocks of the Mineral Mountains range from Precambrian to Quaternary in age, but mostly consist of Tertiary granitic rocks. The range lies with the Wah Wah-Tusher mineral belt. Lead, silver, gold, and tungsten have been mined commercially. During a geochemical survey conducted in the summer of 1978, 30 water samples and 29 stream-sediment samples were collected from the Mineral Mountains area. The interpretation of simple plots of uranium concentrations and the results of a Q-mode factor analysis indicate that potential exists for uranium mineral deposits within the Mineral Mountains. The most favorable areas are in the granitic pluton near its contacts with sedimentary and metamorphic rocks. The most likely source of the uranium anomalies is uraninite-bearing epigenic veins along faults and fractures within the pluton. Three hypothetical models are proposed to account for the uranium mineralization.

Open-File Report↗

USGS2021

Postcaldera intrusive magmatism at the Platoro caldera complex, Southern Rocky Mountain volcanic field, Colorado, USA

The Oligocene Platoro caldera complex of the San Juan volcanic locus in Colorado (USA) features numerous exposed plutons both within the caldera and outside its margins, enabling investigation of the timing and evolution of postcaldera magmatism. Intrusion whole-rock geochemistry and phenocryst and/or mineral trace element compositions coupled with new zircon U-Pb geo-chronology and zircon in situ Lu-Hf isotopes document distinct pulses of magma from beneath the caldera complex. Fourteen intrusions, the Chiquito Peak Tuff, and the dacite of Fisher Gulch were dated, showing intrusive magmatism began after the 28.8 Ma eruption of the Chiquito Peak Tuff and continued to 24 Ma. Additionally, magmatic-hydrothermal mineralization is associated with the intrusive magmatism within and around the margins of the Platoro caldera complex. After caldera collapse, three plutons were emplaced within the subsided block between ca. 28.8 and 28.6 Ma. These have broadly similar modal miner-alogy and whole-rock geochemistry. Despite close temporal relations between the tuff and the intrusions, mineral textures and compositions indicate that the larger two intracaldera intrusions are discrete later pulses of magma. Intrusions outside the caldera are younger, ca. 28–26.3 Ma, and smaller in exposed area. They contain abundant glomerocrysts and show evidence of open-system processes such as magma mixing and crystal entrainment. The protracted magmatic history at the Platoro caldera complex documents the diversity of the multiple discrete magma pulses needed to generate large composite volcanic fields.

Colorado↗