Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
USGS2016

Geology and mineral resources of the Southwestern and South-Central Wyoming Sagebrush Focal Area, Wyoming, and the Bear River Watershed Sagebrush Focal Area, Wyoming and Utah: Chapter E in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the Southwestern and South-Central Wyoming and Bear River Watershed, Wyoming and Utah, SFAs.

Wyoming, Utah↗
USGS2002

Total dissolved gas and water temperature in the lower Columbia River, Oregon and Washington, 2002: Quality-assurance data and comparison to water-quality standards

Significant Findings The U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers, collected total-dissolved-gas and water-temperature data at eight sites near dams on the lower Columbia River in 2002. When water is released through the spillways of dams, air is entrained in the water, increasing the concentration of total dissolved gas to levels that can have adverse effects on freshwater aquatic life. Significant findings include: For the eight monitoring sites in water year 2002, an average of 99.6% of the total-dissolved gas data were received in real time by the USGS satellite downlink and were within 1% saturation of the expected value, based on calibration data and ambient river conditions at adjacent sites. Most field checks of total-dissolved-gas sensors with a secondary standard were within 1% saturation. Field checks of barometric pressure and water temperature were usually within 1 millimeter of mercury and 0.05 degrees Celsius, respectively. In June and July 2002, spills exceeded 140,000 cubic feet per second at the John Day, The Dalles, and Bonneville Dams. These spills resulted in levels of total dissolved gas that exceeded 120% saturation downstream of the dams. The variance to the State of Oregon water-quality standard for total dissolved gas of 110% saturation was exceeded at seven of the eight monitoring sites. The sites at Camas and Bonneville are considered forebay sites and had the most days exceeding the variance of 115% saturation. The forebay exceedances may have been the result of the cumulative effects of significant spill throughout the lower Columbia River. Apparently, the levels of total dissolved gas did not dissipate rapidly enough downstream of the dams before reaching the next site. From mid-July to mid-September, water temperatures were usually above 20 degrees Celsius at each of the seven lower Columbia River sites in operation. According to the Oregon water-quality standard, when the temperature of the lower Columbia River exceeds 20 degrees Celsius, no measurable temperature increase resulting from anthropogenic activities is allowed.

Oregon, Washington↗
USGS1994

Selected ground-water information for the Columbia Plateau Regional Aquifer System, Washington and Oregon, 1982-1985; Volume III, Ground-water quality data

The data report presents ground-water information collected and analyzed as part of the U.S. Geological Survey's Columbia Plateau Regional Aquifer-System Analysis Program. The information was gathered from July 1982 through September 1985 in the part of the aquifer system located in central and eastern Washington and north-central and northeastern Oregon. The report consists of three volumes: volume I, geohydrology; volume II, water levels; and volume III, ground-water quality. This volume, III, presents ground-water quality data gathered from about 570 wells during the study.

Open-File Report↗
USGS2024

Empirical ground-motion basin response in the California Great Valley, Reno, Nevada, and Portland, Oregon

We assess how well the Next-Generation Attenuation-West 2 (NGA-West2) ground-motion models (GMMs), which are used in the US Geological Survey’s (USGS) National Seismic Hazard Model (NSHM) for crustal faults in the western United States, predict the observed basin response in the Great Valley of California, the Reno basin in Nevada, and Portland and Tualatin basins in Oregon. These GMMs rely on site parameters such as the time-averaged shear-wave velocity ( V S ) in the upper 30 m of Earth’s crust ( V S30 ) and depths to 1.0 and 2.5 km/s shear-wave isosurfaces ( Z 1.0 and Z 2.5 ) to capture basin effects and were developed using observations and simulations primarily from the Los Angeles region in southern California. Using ground-motion records from mostly small-to-moderate earthquakes and mixed-effects regression analysis, we find that the GMMs perform well with our local basin-depth models for the California Great Valley. With our local basin-depth models for Reno, the GMMs do not perform as well for this relatively shallow basin and exhibit little sensitivity to the basin parameters used in the NGA-West2 GMMs. We also find good performance for the local Z 1.0 model across the Portland region, whereas the local Z 2.5 model provides little predictive power except at sites in the deepest part of the Tualatin basin. Additional work could improve the performance of the site and basin terms in the NGA-West2 GMMs for regions with geologic structure different than the deep basins in southern California and the Great Valley. In addition, we find significant discrepancies among the GMMs in how the uncertainty in the ground motion varies with basin depth and pseudospectral period. Our results can help guide seismic hazard analyses on whether to include these local basin-depth models.

Earthquake Spectra↗
USGS2001

Shaded-relief and color shaded-relief maps of the Willamette Valley, Oregon

This Open-File Report is released as a digital map database. It includes PostScript plot files that contain images of the map sheets; the images also contain a brief explanation describing the geology and physiography of the study area. The digital map database is a compilation of newly published 10-m digital-elevation-model (DEM) data for western Oregon and represents the physiography of the Willamette Valley.

Oregon↗
USGS2023

Potassium-39-derived 36Ar production during fission-neutron irradiation and its effect on 40Ar/39Ar ages

Various interference reactions producing unwanted Ar isotopes from K, Ca, Cl and Ar require correction to satisfy the 40 Ar/ 39 Ar age equation. Using GEANT4, we design and build a model Cadmium Lined In Core Irradiation Tube (CLICIT) irradiation facility, as used in the Oregon State TRIGA Reactor (OSTR). We illustrate the complexity of the irradiation of geologic samples within this framework and determine an overlooked production channel of 36 Ar. The production of 36 Ar is fed from the 39 K(n, α ) 36 Cl nuclear channel, 36 Cl subsequently decays to 36 Ar ( 39 K(n, α, β ) 36 Ar). Simulations in this work using a 235 U fission neutron energy spectrum and modelled CLICIT facility, determine a production ratio for this reaction ( 36 Cl/ 39 Ar) K = 0.40 ± 0.01 (1 σ ); greater than an order of magnitude larger than any other K interference. The magnitude of the resulting age bias for an unknown sample will be a function of the integrated neutron flux, the length of irradiation (fluence), the time elapsed since irradiation, and the age relationship between the unknown and neutron fluence monitor. We show using the raw data of (Niespolo et al., 2017) that the age of Alder Creek sanidine can be modified to be ca. 0.1% older (1 σ ), at the 2σ level of current analytical precision for the Alder Creek age for this study. The 39 K(n, α , β ) 36 Ar inference should be incorporated into routine data analysis and may be especially important in the intercalibration of the 40 Ar/ 39 Ar system with other chronometers (e.g., 206 Pb/ 238 U).

Geochimica et Cosmochimica Acta↗
USGS1973

Petrology of the Vulcan Peak alpine-type peridotite, southwestern Oregon

The alpine-type peridotite in the area of Vulcan Peak, Oregon, is part of the larger Josephine ultramafic complex in the Klamath Mountains geologic province. Partially serpentinized, foliated harzburgite with 15 to 30 percent orthopyroxene makes up approximately 90 percent of the body. The remaining 10 percent is dunite that occurs in the harzburgite as concordant and discordant layers and as irregular bodies. In general, the peridotite at Vulcan Peak is similar in structure, texture, mineralogy, and chemistry to the peridotite at Burro Mountain, California. Structures, textures, and compositions of coexisting phases are consistent with high-temperature (1,000° to 1,200°C) deformation and recrystallization in the upper mantle, and tectonic emplacement into its present crustal position. Evidence to indicate whether the peridotite originated as a refractory residue during partial fusion processes that produced mafic melt or by crystallization from an ultramafic or picritic magma remains inconclusive; poikilitic clinopyroxene enclosing olivine in some dunites, and certain chromitite textures, may represent relict igneous features suggesting a magmatic stage in the history of the peridotite.

Oregon↗
USGS1995

Experimental studies of deposition at a debris-flow flume

Geologists commonly infer the flow conditions and the physical properties of debris flows from the sedimentologic, stratigraphic, and morphologic characteristics of their deposits. However, such inferences commonly lack corroboration by direct observation because the capricious nature of debris flows makes systematic observation and measurement of natural events both difficult and dangerous. Furthermore, in contrast to the numerous experimental studies of water flow and related fluvial deposition, few real-time observations and measurements of sediment deposition by large-scale mass flow of debris under controlled conditions have been made. Recent experiments at the U.S. Geological Survey debris-flow flume in the H. J. Andrews Experimental Forest, Oregon (Iverson and others, 1992) are shedding new insight on sediment deposition by debris flows and on the veracity of methods commonly used to reconstruct flow character from deposit characteristics.

Fact Sheet↗
USGS2011

Map of debris flows caused by rainfall during 1996 in parts of the Reedsport and Deer Head Point quadrangles, Douglas County, southern Coast Range, Oregon

This 1:12,000-scale map shows an inventory of debris flows caused by rainfall during 1996 in a 94.4 km 2 area in the southern Coast Range of Oregon. This map and associated digital data are part of a larger U.S. Geological Survey study of debris flows in the southern Coast Range. Available evidence indicates that the flows were triggered by a rain storm that occurred between November 17 and 19. The closest rain gage in the Coast Range (Goodwin Peak) recorded 245 mm during the storm. Maximum rainfall intensity during the storm was 13.2 mm/hr on November 18. Debris flows were photogrammetrically mapped from 1:12,000-scale aerial photographs flown in May, 1997. The inventory is presented on imagery derived from LiDAR data acquired in 2008. We classified mapped debris flows into four categories based on the type of debris-flow activity: (1) discrete slide source areas, (2) predominantly erosion, (3) predominantly transport or mixed erosion and deposition, and (4) predominantly deposition. Locations of woody-debris jams are also shown on the map. The area encompassed by debris flows is 2.1 percent of the 94.4 km 2 map area.

Oregon↗
USGS2017

Field-trip guide to the vents, dikes, stratigraphy, and structure of the Columbia River Basalt Group, eastern Oregon and southeastern Washington

The Columbia River Basalt Group covers an area of more than 210,000 km 2 with an estimated volume of 210,000 km 3 . As the youngest continental flood-basalt province on Earth (16.7–5.5 Ma), it is well preserved, with a coherent and detailed stratigraphy exposed in the deep canyonlands of eastern Oregon and southeastern Washington. The Columbia River flood-basalt province is often cited as a model for the study of similar provinces worldwide. This field-trip guide explores the main source region of the Columbia River Basalt Group and is written for trip participants attending the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon, USA. The first part of the guide provides an overview of the geologic features common in the Columbia River flood-basalt province and the stratigraphic terminology used in the Columbia River Basalt Group. The accompanying road log examines the stratigraphic evolution, eruption history, and structure of the province through a field examination of the lavas, dikes, and pyroclastic rocks of the Columbia River Basalt Group.

Oregon, Washington↗
USGS2008

Estimating Flow-Duration and Low-Flow Frequency Statistics for Unregulated Streams in Oregon

Flow statistical datasets, basin-characteristic datasets, and regression equations were developed to provide decision makers with surface-water information needed for activities such as water-quality regulation, water-rights adjudication, biological habitat assessment, infrastructure design, and water-supply planning and management. The flow statistics, which included annual and monthly period of record flow durations (5th, 10th, 25th, 50th, and 95th percent exceedances) and annual and monthly 7-day, 10-year (7Q10) and 7-day, 2-year (7Q2) low flows, were computed at 466 streamflow-gaging stations at sites with unregulated flow conditions throughout Oregon and adjacent areas of neighboring States. Regression equations, created from the flow statistics and basin characteristics of the stations, can be used to estimate flow statistics at ungaged stream sites in Oregon. The study area was divided into 10 regression modeling regions based on ecological, topographic, geologic, hydrologic, and climatic criteria. In total, 910 annual and monthly regression equations were created to predict the 7 flow statistics in the 10 regions. Equations to predict the five flow-duration exceedance percentages and the two low-flow frequency statistics were created with Ordinary Least Squares and Generalized Least Squares regression, respectively. The standard errors of estimate of the equations created to predict the 5th and 95th percent exceedances had medians of 42.4 and 64.4 percent, respectively. The standard errors of prediction of the equations created to predict the 7Q2 and 7Q10 low-flow statistics had medians of 51.7 and 61.2 percent, respectively. Standard errors for regression equations for sites in western Oregon were smaller than those in eastern Oregon partly because of a greater density of available streamflow-gaging stations in western Oregon than eastern Oregon. High-flow regression equations (such as the 5th and 10th percent exceedances) also generally were more accurate than the low-flow regression equations (such as the 95th percent exceedance and 7Q10 low-flow statistic). The regression equations predict unregulated flow conditions in Oregon. Flow estimates need to be adjusted if they are used at ungaged sites that are regulated by reservoirs or affected by water-supply and agricultural withdrawals if actual flow conditions are of interest. The regression equations are installed in the USGS StreamStats Web-based tool (http://water.usgs.gov/osw/streamstats/index.html, accessed July 16, 2008). StreamStats provides users with a set of annual and monthly flow-duration and low-flow frequency estimates for ungaged sites in Oregon in addition to the basin characteristics for the sites. Prediction intervals at the 90-percent confidence level also are automatically computed.

Scientific Investigations Report↗
USGS2024

Total phosphorus and suspended-sediment concentrations and loads from two main tributaries to Upper Klamath Lake, Oregon, 2014–20

Total phosphorus (TP) and suspended-sediment concentrations (SSC) and loads were computed at two U.S. Geological Survey (USGS) streamgages in the upper Klamath River Basin on the Sprague (USGS site ID 11501000) and Williamson (USGS site ID 11502500) Rivers using high temporal resolution turbidity and streamflow data to develop surrogate regression models. Regression models were updated and validated for TP at the Williamson River site, and additional data improved a prior published TP model, increasing the coefficient of determination (R 2 ) from 0.73 to 0.88. A new TP regression model was developed for the Sprague River site using 2 years of data and showed promising results with an R 2 of 0.93. Suspended-sediment concentration (SSC) surrogate models were also updated at these sites using a longer period of record than the TP models and improved characterization of sediment transport conditions at these monitoring sites. Computations of TP loads were compared to the annual loading capacity dictated by the total maximum daily load (TMDL) for Upper Klamath Lake and showed that the combined TP load of the Williamson and Sprague Rivers approaches the annual loading capacity in water years with high annual streamflow. TP loads were also compared to loads computed by the Klamath Tribes using a long-term dataset and a regression and interpolation algorithm (RIA). The comparison showed that the two methods report similar annual loads, with the surrogate regression method generally reporting lower loads than the RIA, and the RIA annual loads falling within the range of uncertainty of the surrogate regression model results. Determining the effect of habitat and stream restoration on basin-scale TP and suspended-sediment loading is challenging using the surrogate regression method at these sites given the short period of record that TP and suspended-sediment load (SSL) data are available. However, long-term analysis by the Klamath Tribes in their larger monitoring network could provide insight into the impact of restoration at smaller spatial scales compared to the basin-wide assessment produced in this study.

Oregon↗
USGS1964

Pre-tertiary orogenic and plutonic intrusive activity in central and northeastern Oregon

Pre - Tertiary rocks of the Blue Mountain region of central and northeastern Oregon comprise three major sedimentary and volcanic sequences and two distinct intrusive magma series. The ages of the sedimentary-volcanic sequences are Paleozoic, Late Triassic-Late Jurassic, and middle Cretaceous (Albian to Cenomanian), respectively. The earlier intrusive magma series ranges in composition from peridotite to albite granite and was emplaced during the major orogeny in the Blue Mountain region between earlier Permian and Late Triassic time. The later intrusive magma series is related to the Idaho batholith proper, ranges from gabbro to granodiorite, and probably was emplaced during the earlier half of Cretaceous time. The emplacement of a major intrusive magma series during Permian and Triassic time suggests a much closer relationship to the northern part of the Cordillera, in Canada and Alaska, than to the southern part in southwestern Oregon and California.

Oregon↗
USGS2007

Digital mapping techniques '06 - Workshop proceedings

The Digital Mapping Techniques '06 (DMT'06) workshop was attended by more than 110 technical experts from 51 agencies, universities, and private companies, including representatives from 27 state geological surveys (see Appendix A of these Proceedings). This workshop was similar in nature to the previous nine meetings, which were held in Lawrence, Kansas (Soller, 1997), Champaign, Illinois (Soller, 1998), Madison, Wisconsin (Soller, 1999), Lexington, Kentucky (Soller, 2000), Tuscaloosa, Alabama (Soller, 2001), Salt Lake City, Utah (Soller, 2002), Millersville, Pennsylvania (Soller, 2003), Portland, Oregon (Soller, 2004), and Baton Rouge, Louisiana (Soller, 2005). This year's meeting was hosted by the Ohio Geological Survey, from June 11-14, 2006, on the Ohio State University campus in Columbus, Ohio. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops. Each DMT workshop has been coordinated by the Association of American State Geologists (AASG) and U.S. Geological Survey (USGS) Data Capture Working Group, the latter of which was formed in August 1996 to support the AASG and the USGS in their effort to build a National Geologic Map Database (see Soller, this volume, and http://ngmdb.usgs.gov/info/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed for the database - and for the State and Federal geological surveys - to provide more high-quality digital maps to the public. At the 2006 meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, "publishing" includes Web-based release); 2) field data capture software and techniques, including the use of LIDAR; 3) digital cartographic techniques; 4) migration of digital maps into ArcGIS Geodatabase format; 5) analytical GIS techniques; and 6) continued development of the National Geologic Map Database.

Open-File Report↗
USGS2019

Monitoring protocol development and assessment for narrowly endemic toads in Nevada, 2018

Several species and subspecies of toads are endemic to small spring systems in the Great Basin, and their restricted ranges and habitat extent make them vulnerable to environmental perturbations. Very little is known about several of these toad populations, so a group of stakeholders including the U.S. Geological Survey, U.S. Fish and Wildlife Service, Bureau of Land Management, Nevada Department of Wildlife, the U.S. Navy, U.S. Forest Service, and Oregon State University met to discuss information needs on these populations and to develop a monitoring protocol that would detect population changes over time. In cooperation with the U.S. Fish and Wildlife Service, the U.S. Geological Survey implemented the proposed survey protocol, a multi-state occupancy design, for three sites: Dixie Valley, Railroad Valley, and Hot Creek, to evaluate its ease of implementation and effectiveness. We found that the multi-state occupancy protocol worked well in the Dixie Valley and, with some refinement, would likely work well in the Railroad Valley. We suggest that capture-mark-recapture of adults might be a more effective approach at Hot Creek. For most life stages of most populations, detection probabilities were positively related to survey duration up to 20 minutes, and the best time of day to conduct surveys varied by life stage and population. We make population-specific suggestions for the number of surveys and their timing and duration. Annual surveys using the suggested survey protocols will likely allow estimation of trends in the proportion of area of each population existing in different population states (occupied, occupied with evidence of reproduction, and unoccupied) and in most cases can be readily implemented with minimal training or handling of toads.

California, Idaho, Nevada, Oregon, Utah↗