SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

USGS1984

Geology of El Chichon volcano, Chiapas, Mexico

The (pre-1982) 850-m-high andesitic stratovolcano El Chicho??n, active during Pleistocene and Holocene time, is located in rugged, densely forested terrain in northcentral Chiapas, Me??xico. The nearest neighboring Holocene volcanoes are 275 km and 200 km to the southeast and northwest, respectively. El Chicho??n is built on Tertiary siltstone and sandstone, underlain by Cretaceous dolomitic limestone; a 4-km-deep bore hole near the east base of the volcano penetrated this limestone and continued 770 m into a sequence of Jurassic or Cretaceous evaporitic anhydrite and halite. The basement rocks are folded into generally northwest-trending anticlines and synclines. El Chicho??n is built over a small dome-like structure superposed on a syncline, and this structure may reflect cumulative deformation related to growth of a crustal magma reservoir beneath the volcano. The cone of El Chicho??n consists almost entirely of pyroclastic rocks. The pre-1982 cone is marked by a 1200-m-diameter (explosion?) crater on the southwest flank and a 1600-m-diameter crater apparently of similar origin at the summit, a lava dome partly fills each crater. The timing of cone and dome growth is poorly known. Field evidence indicates that the flank dome is older than the summit dome, and K-Ar ages from samples high on the cone suggest that the flank dome is older than about 276,000 years. At least three pyroclastic eruptions have occurred during the past 1250 radiocarbon years. Nearly all of the pyroclastic and dome rocks are moderately to highly porphyritic andesite, with plagioclase, hornblende and clinopyroxene the most common phenocrysts. Geologists who mapped El Chicho??n in 1980 and 1981 warned that the volcano posed a substantial hazard to the surrounding region. This warning was proven to be prophetic by violent eruptions that occurred in March and April of 1982. These eruptions blasted away nearly all of the summit dome, blanketed the surrounding region with tephra, and sent pyroclastic flows down radial drainages on the flanks of the cone; about 0.3 km3 of material (density of all products normalized to 2.6 g cm-3) was erupted. More debris entered the stratosphere than from any other volcanic eruption within at least the past two decades. Halite and a calcium sulfate mineral (anhydrite?) recovered from the stratospheric cloud, and anhydrite as a common accessory mineral in 1982 juvenile erupted products may reflect contamination of El Chicho??n magma by the evaporite sequence revealed by drilling. ?? 1984.

Journal of Volcanology and Geothermal Research↗

USGS2002

Results of Hydraulic Tests in Miocene Tuffaceous Rocks at the C-Hole Complex, 1995 to 1997, Yucca Mountain, Nye County, Nevada

Four hydraulic tests were conducted by the U.S. Geological Survey at the C-hole complex at Yucca Mountain, Nevada, between May 1995 and November 1997. These tests were conducted as part of ongoing investigations to determine the hydrologic and geologic suitability of Yucca Mountain as a potential site for permanent underground storage of high-level nuclear waste. The C-hole complex consists of three 900-meter-deep boreholes that are 30.4 to 76.6 meters apart. The C-holes are completed in fractured, variably welded tuffaceous rocks of Miocene age. Six hydrogeologic intervals occur within the saturated zone in these boreholes - the Calico Hills, Prow Pass, Upper Bullfrog, Lower Bullfrog, Upper Tram, and Lower Tram intervals. The Lower Bullfrog and Upper Tram intervals contributed about 90 percent of the flow during hydraulic tests. The four hydraulic tests conducted from 1995 to 1997 lasted 4 to 553 days. Discharge from the pumping well, UE-25 c #3, ranged from 8.49 to 22.5 liters per second in different tests. Two to seven observation wells, 30 to 3,526 meters from the pumping well, were used in different tests. Observation wells included UE-25 c #1, UE-25 c #2, UE-25 ONC-1, USW H-4, UE-25 WT #14, and UE-25 WT #3 in the tuffaceous rocks and UE-25 p #1 in Paleozoic carbonate rocks. In all hydraulic tests, drawdown in the pumping well was rapid and large (2.9-11 meters). Attributable mostly to frictional head loss and borehole-skin effects, this drawdown could not be used to analyze hydraulic properties. Drawdown and recovery in intervals of UE-25 c #1 and UE-25 c #2 and in other observation wells typically was less than 51 centimeters. These data were analyzed. Hydrogeologic intervals in the C-holes have layered heterogeneity related to faults and fracture zones. Transmissivity, hydraulic conductivity, and storativity generally increase downhole. Transmissivity ranges from 4 to 1,600 meters squared per day; hydraulic conductivity ranges from 0.1 to 50 meters per day; and storativity ranges from 0.00002 to 0.002. Transmissivity in the Miocene tuffaceous rocks decreases from 2,600 to 700 meters squared per day northwesterly across the 21-square-kilometer area affected by hydraulic tests at the C-hole complex. The average transmissivity of the tuffaceous rocks in this area, as determined from plots of drawdown in most or all observation wells as functions of time or distance from the pumping well, is 2,100 to 2,600 meters squared per day. Average storativity determined from these plot ranges is 0.0005 to 0.002. Hydraulic conductivity ranges from less than 2 to more than 10 meters per day; it is largest where prominent northerly trending faults are closely spaced or intersected by northwesterly trending faults. During hydraulic tests, the Miocene tuffaceous rocks functioned as a single aquifer. Drawdown occurred in all monitored intervals of the C-holes and other observation wells, regardless of the hydrogeologic interval being pumped. This hydraulic connection across geologic and lithostratigraphic contacts is believed to result from interconnected faults, fractures, and intervals with large matrix permeability. Samples of UE-25 c #3 water, analyzed from 1995 to 1997, seem to indicate that changes in the quality of the water pumped from that well are probably due solely to lateral variations in water quality within the tuffaceous rocks.

Water-Resources Investigations Report↗

USGS2019

Dextral, normal, and sinistral faulting across the eastern California shear zone-Mina deflection transition, California-Nevada

Strike-slip faults commonly include extensional and contractional bends and stepovers, whereas rotational stepovers are less common. The Volcanic Tableland, Black Mountain, and River Spring areas (California and Nevada, USA) (hereafter referred to as the VBR region) straddle the transition from the dominantly NW-striking dextral faults that define the northwestern part of the eastern California shear zone into a rotational stepover characterized by dominantly NE-striking sinistral faults that define the southwestern Mina deflection. New detailed geologic mapping, structural studies, and 40 Ar/ 39 Ar geochronology across the VBR region allow us to calculate Pliocene to Pleistocene fault slip rates and test predictions for the kinematics of fault slip transfer into this rotational stepover. In the VBR, Mesozoic basement is nonconformably overlain by a Miocene sequence of rhyolite, dacite, and andesite volcanic rocks that yield 40 Ar/ 39 Ar ages between 22.878 ± 0.051 Ma and 11.399 ± 0.041 Ma. Miocene rocks are unconformably overlain by an extensive sequence of Pliocene basalt and andesite lava flows and cinder cones that yield 40 Ar/ 39 Ar ages between 3.606 ± 0.060 Ma and 2.996 ± 0.027 Ma. The Pliocene sequence is, in turn, unconformably overlain by Quaternary tuffs and sedimentary rocks. This sequence of rocks is cut by NS- to NW-striking normal faults across the Volcanic Tableland that transition northward into NS-striking normal faults across the Black Mountain area and that, in turn, transition northward into NW-striking dextral and NE-striking sinistral faults in the River Spring area. A range of geologic markers were used to measure offset across the faults in the VBR, and combined with the age of the markers, yield minimum ∼EW-extension rates of ∼0.5 mm/yr across the Volcanic Tableland and Black Mountain regions, and minimum NW-dextral slip and NE-sinistral slip rates of ∼0.7 and ∼0.3 mm/yr, respectively, across the River Spring region. In the River Spring area, our preferred minimum dextral slip and sinistral slip rates are 0.8–0.9 mm/yr and 0.7–0.9 mm/yr, respectively. We propose three kinematic fault slip models, two irrotational and one rotational, whereby the VBR region transfers a portion of dextral Owens Valley fault slip northwestward into the Mina deflection. In irrotational model 1, Owens Valley fault slip is partitioned into two components, one northeastward onto the White Mountain fault zone and one northwestward into the Volcanic Tableland. Slip from the two zones is then transferred northward into the southwestern Mina deflection. In irrotational model 2, Owens Valley fault slip is partitioned into three components, with the third component partitioned west-northwest onto the Sierra Nevada frontal fault zone. In the rotational model, predicted sinistral slip rates across the southwestern Mina deflection are at least 115% greater than our observed minimum slip rates, implying our minimum observed rates underestimate true sinistral slip rates. A comparison of summed geologic fault slip rates, parallel to motion of the Sierra Nevada block relative to the central Great Basin, from the Sierra Nevada northeastward across the VBR region and into western Nevada are the same as geodetic rates, if our assumptions about the geologic slip rate across the dextral White Mountain fault zone is correct.

California, Nevada↗

USGS2004

Structural geology of the proposed site area for a high-level radioactive waste repository, Yucca Mountain, Nevada

Geologic mapping and fracture studies have documented the fundamental patterns of joints and faults in the thick sequence of rhyolite tuffs at Yucca Mountain, Nevada, the proposed site of an underground repository for high-level radioactive waste. The largest structures are north-striking, block-bounding normal faults (with a subordinate left-lateral component) that divide the mountain into numerous 1-4-km-wide panels of gently east-dipping strata. Block-bounding faults, which underwent Quaternary movement as well as earlier Neogene movement, are linked by dominantly northwest-striking relay faults, especially in the more extended southern part of Yucca Mountain. Intrablock faults are commonly short and discontinuous, except those on the more intensely deformed margins of the blocks. Lithologic properties of the local tuff stratigraphy strongly control the mesoscale fracture network, and locally the fracture network has a strong influence on the nature of intrablock faulting. The least faulted part of Yucca Mountain is the north-central part, the site of the proposed repository. Although bounded by complex normal-fault systems, the 4-km-wide central block contains only sparse intrablock faults. Locally intense jointing appears to be strata-bound. The complexity of deformation and the magnitude of extension increase in all directions away from the proposed repository volume, especially in the southern part of the mountain where the intensity of deformation and the amount of vertical-axis rotation increase markedly. Block-bounding faults were active at Yucca Mountain during and after eruption of the 12.8-12.7 Ma Paintbrush Group, and significant motion on these faults postdated the 11.6 Ma Rainier Mesa Tuff. Diminished fault activity continued into Quaternary time. Roughly half of the stratal tilting in the site area occurred after 11.6 Ma, probably synchronous with the main pulse of vertical-axis rotation, which occurred between 11.6 and 11.45 Ma. Studies of sequential formation of tectonic joints, in the context of regional paleostress studies, indicate that north- and northwest-striking joint sets formed coevally with the main faulting episode during regional east-northeast-west-southwest extension and that a prominent northeast-striking joint set formed later, probably after 9 Ma. These structural analyses contribute to the understanding of several important issues at Yucca Mountain, including potential hydrologic pathways, seismic hazards, and fault-displacement hazards. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗

USGS1956

Geology of the Ralston Buttes district, Jefferson County, Colorado: a preliminary report

The Ralston Buttes district in Jefferson County is one of the most significant new uranium districts located east of the Continental Divide in Colorado. The district is east of the Colorado Front Range mineral belt, along the east front of the range. From November 1953 through October 1956, about 10,000 tons of uranium ore, much of which was high-grade pitchblende-bearing vein material, was shipped from the district. The ore occurs in deposits that range in size from bodies containing less than 50 tons to ore shoots containing over 1,000 tons. The only other mining activity in the area has been a sporadic production of beryl, feldspar, and scrap mica from Precambrian pegmatites, and quarrying of dimension stone, limestone, and clay from sedimentary rocks. Most of the Ralston Buttes district consists of complexly folded Precambrian metamorphic and igneous rocks - gneiss, schist, quartzite, amphibolite, and granodiorite. Paleozoic and Mesozoic sedimentary rocks crop out in the northeastern part of the district. These rocks are cut by northwesterly-trending fault systems of Laramide age and by small bodies of intrusive rocks that are Tertiary in age. The typical uranium deposits in the district are hydrothermal veins occupying openings in Laramide fault breccias or related fractures that cut the Precambrian rocks. Pitchblende and lesser amounts of secondary uranium minerals are associated with sparse base-mental sulfides in a gangue of carbonate minerals, potash feldspar, and, more rarely, quartz. Less common types of deposits consist of pitchblende and secondary uranium minerals that occupy fractures cutting pegmatites and quartz veins. The uranium deposits are concentrated in two areas, the Ralston Creek area and the Golden Gate Canyon area. The deposits in the Ralston Creek area are located along the Rogers fault system, and the deposits in the Golden Gate Canyon area are along the Hurricane Hill fault system. Two geologic factors were important to the localization of the uranium deposits: (1) favorable structural environment and (2) favorable host rocks. The deposits in each of the two major areas are located where a northwesterly-trending Laramide fault system splits into a complex network of faults. Also, most of the deposits appear to be localized where the faults cut Precambrian rocks rich in hornblende, biotite, or garnet and biotite. The ore controls recognized in this relatively new uranium district may have wider application in areas of similar geology elsewhere in the Front Range.

Colorado↗

USGS1976

Mineral deposits and occurrences in the McCarthy Quadrangle, Alaska

The McCarthy quadrangle contains numerous and diverse mineral deposits in various geologic settings. Copper is the dominant mineral commodity, both historically and in terms of potential future production. Gold and silver are the only other metals that have been produced. The metalliferous deposits are concentrated in a northwest-trending belt along the southern flank of the Wrangell Mountains, and, to a lesser extent, in a similar belt along the northeast flank of the range. Both belts have upper Paleozoic (Skolai Group) basements, abundant Mesozoic rocks, and some Tertiary intrusive rocks. They are marked by numerous faults, mainly northwest-striking. Mineral deposits are uncommon elsewhere in the quadrangle, especially in large tracks underlain by Wrangell Lava and in smaller areas underlain by the Kaskawulsh Group of Kindle (1953). Both the Wrangell Lava and the Kaskawulsh underlie rugged mountainous regions with extensive snow and ice cover, and could conceivably contain undetected concealed deposits. The metallic, nonmetallic, and energy resources of the quadrangle are described sequentially. Copper, gold, and silver, because of their importance, are described early in the section on metal commodities; descriptions of the other metals follows in alphabetic sequence. Locations of the deposits and relative supplementary data for individual deposits are given in the accompanying map and table.

Alaska↗

USGS1984

Offset of Tertiary arcs on the Alaska Peninsula: A section in Geological Survey research, fiscal year 1981

Geologic mapping and potassium-argon dating by R. L. Detterman, F. H. Wilson, J. E. Case, and Nora Shew in the Ugashik and western part of the Karluk quadrangles have shown that the Eocene and Oligocene volcanic arc continues into these quadrangles from the south in the Chignik and Sutwik Island quadrangles. Surface exposures of the arc extend northward to approximately 57°30'N., or midway through the Ugashik quadrangle, but none are observed north of that point. Subsurface drill-hole data (Brockway and others, 1975) indicate continuation of the arc, possibly offset to the northwest of the northernmost known surface exposures. In the extreme northern part of the Ugashik and Karluk quadrangles, volcanic rocks again become important. These volcanic rocks are as yet undated; however, they may be related to the Katmai late Tertiary volcanic centers. Like the early Tertiary volcanic arc, the present-day Aleutian arc is also offset to the northwest in the northern part of the Ugashik and Karluk quadrangles. No major offset of the Mesozoic rocks is indicated through the offset zone; this fact suggests a change in the Tertiary tectonic regime in the area of the offset.

Alaska↗

USGS1998

Upper crustal structure and Neogene tectonic development of the California continental borderland

Multichannel seismic-reflection data, sonobuoy seismic-refraction data, and regional geology are used to define the upper crustal structure of the southern California continental borderland and to delineate the characteristics of the main lithotectonic belts of the region. The Catalina Schist belt is separated on its west side from the gently deformed Nicolas forearc belt by faults that have steep west dips and pronounced normal separations. On its east side the schist belt is bounded by a large detachment fault that dips gently to the east beneath the west edge of the Peninsular Ranges belt at the coastline near Oceanside. The Catalina Schist was uplifted from middle crustal depths and exposed during a major event of extensional tectonism that started in early Miocene time in conjunction with about 10° of clockwise rotation of the western Transverse Ranges belt. Part of the uplift of the Catalina Schist could have occurred on the detachment fault, but it is thought to have mostly occurred on the steep faults that bound the west edge of the schist belt. A large amount of uplift is required, and it probably involved strong footwall flexural deformation in the wake of the translating and rotating western Transverse Ranges and Nicolas forearc belts. Extension, accompanied by probable large amounts of right slip, continued in the borderland region during and after middle Miocene time. The later stage of extension was accompanied by rapid clockwise rotation of the western Transverse Ranges of at least 90°. Most of the borderland, including the belt of schist that was uplifted in early Miocene time, was further deformed into numerous basins and ridges during this stage of oblique extension. The primary driving force for the deformation is thought to have been derived from the rapid northwest motion of the Pacific plate after it had become coupled to the Farallon plate system, which had previously been subducted beneath the borderland.

Geological Society of America Bulletin↗

USGS1985

Aeromagnetic map and analysis of aeromagnetic and aeroradioactivity data in the Blood Mountain, Chattahoochee, and Tray Mountain Roadless Areas, northern Georgia

The data for the aerornagnetic map of the Blood Mountain, Chattahoochee, and Tray Mountain Roadless Areas and vicinity were compiled from two separate airborne surveys {U.S. Geological Survey, 1977, 1981) produced in cooperation with the State of Georgia. These surveys were flown by fixed - wing aircraft in 1976 and 1981 at 500 ft (150 m) above mean terrain along rarallel flight lines oriented northwest-southeast. Flight-line spacing is 0.5 mi (0.8 km} for the 1981 survey, which covers the major part of the map, and l mi (1.6 km) for the 1976 survey, which covers the southeast corner of the map. The 1976 survey was adjusted to the magnetic level of the 1981 survey and recontoured where the surveys join. The International Geomagnetic Reference Field (Barraclough and Fabiano, 1975) has been removed from the data of each survey.

Georgia↗

USGS1979

Geologic evaluation of major Landsat lineaments in Nevada and their relationship to ore districts

Analysis of diverse geologic, geophysical, and geochemical data shows that eight major lineament systems delineated in Landsat images of Nevada are morphological and tonal expressions of substantially broader structural zones. Southern Nevada is dominated by the 175 km-wide northwest-trending Walker Lane, a 150 km-wide zone of east-trending lineament systems consisting of the Pancake Range, Warm Springs, and Timpahute lineament systems, and a 125 km-wide belt of northeast-trending faults termed the Pahranagat lineament system. Northern Nevada is dominated by the northeast-trending 75-200km wide Midas Trench lineament system, which is marked by northeasterly-oriented faults, broad gravity anomalies, and the Battle Mountain heat flow high; this feature appears to extend into central Montana. The Midas Trench system is transected by the Northern Nevada Rift, a relatively narrow zone of north-northwest-trending basaltic dikes that give rise to a series of prominent aeromagnetic highs. The northwest-trending Rye Patch lineament system, situated at the northeast boundary of the Walker Lane, also intersects the Midas Trench system and is characterized by stratigraphic discontinuities and alignment of aeromagnetic anomalies. Field relationships indicate that all the lineament systems except for the Northern Nevada Rift are conjugate shears formed since mid-Miocene time during extension of the Great Basin. Metallization associated with volcanism was widespread along these systems during the 17-6 m.y. period. However, these zones appear to have been established prior to this period, probably as early as Precambr-an time. These lineament systems are interpreted to be old, fundamental, structural zones that have been reactivated episodically as stress conditions !changed in the western United States. Many metal districts are localized within these zones as magma rose along the pre-existing conduits.

Open-File Report↗

USGS2023

Groundwater flow model investigation of the vulnerability of water resources at Chaco Culture National Historical Park related to unconventional oil and gas development

Chaco Culture National Historical Park (CCNHP), located in northwestern New Mexico, protects the greatest concentration of Chacoan historical sites in the American Southwest. Geologically, CCNHP is located within the San Juan structural basin, which consists in part of complex Cretaceous stratigraphy and hosts a variety of energy resources. As part of a larger study to investigate the vulnerability of water resources at CCNHP related to oil and natural gas extraction activities, a MODFLOW groundwater model of the Mancos Shale and Gallup Sandstone units was created by the U.S. Geological Survey, as a part of a cooperative study with the National Park Service, to assess advective groundwater flow paths and traveltimes. The model determined that groundwater flow directions currently trend from south-southeast to north-northwest within the vicinity of CCNHP, groundwater traveltime through the Gallup Sandstone ranges from thousands to tens of thousands of years, and traveltime through the Mancos Shale may range from millions to tens of millions of years. The capture zone of the main CCNHP well (referred to as the “Chaco well”) extends to the south-southeast and ranges in width from approximately 1 to 12 miles, depending on pumping rate. Eighteen inactive hydrocarbon related wells are located within the capture zone and within 10 kilometers of the Chaco well. Given model estimates of traveltimes of groundwater in the Gallup Sandstone aquifer, advective groundwater transport to the Chaco well would take approximately 430 years from the nearest inactive hydrocarbon related wells. Differencing of historical and modern-day potentiometric surfaces of the Gallup Sandstone indicate a drop in groundwater levels between 34 and 96 feet within the CCNHP boundaries. Hydraulic fracturing, simulated as increased hydraulic conductivity zones, decreased groundwater traveltimes (from millions to thousands of years) and acted as permeable pathways from the Mancos Shale to the Gallup Sandstone.

Arizona, New Mexico↗

USGS2002

Geologic map of the Tetilla Peak Quadrangle, Santa Fe and Sandoval counties, New Mexico

This digital geologic map summarizes all available geologic information for the Tetilla Peak quadrangle located immediately southwest of Santa Fe, New Mexico. The geologic map consists of new polygon (geologic map units) and line (contact, fault, fold axis, dike, flow contact, hachure) data, as well as point data (locations for structural measurements, geochemical and geochronologic data, geophysical soundings, and water wells). The map database has been generated at 1:24,000 scale, and provides significant new geologic information for an area of the southern Cerros del Rio volcanic field, which sits astride the boundary of the Espanola and Santo Domingo basins of the Rio Grande rift. The quadrangle includes the west part of the village of La Cienega along its eastern border and includes the southeasternmost part of the Cochiti Pueblo reservation along its northwest side. The central part of the quadrangle consists of Santa Fe National Forest and Bureau of Land Management lands, and parts of several Spanish-era land grants. Interstate 25 cuts through the southern half of the quadrangle between Santa Fe and Santo Domingo Pueblo. Canada de Santa Fe, a major river tributary to the Rio Grande, cuts through the quadrangle, but there is no dirt or paved road along the canyon bottom. A small abandoned uranium mine (the La Bajada mine) is found in the bottom of the Canada de Santa Fe about 3 km east of the La Bajada fault zone; it has been partially reclaimed. The surface geology of the Tetilla Peak quadrangle consists predominantly of a thin (1-2 m generally, locally as thick as 10? m) layer of windblown surficial deposits that has been reworked colluvially. Locally, landslide, fluvial, and pediment deposits are also important. These colluvial deposits mantle the principal bedrocks units, which are (from most to least common): (1) basalts, basanites, andesite, and trachyte of the Pliocene (2.7-2.2 Ma) Cerros del Rio volcanic field; (2) unconsolidated deposits of the Santa Fe Group, mainly along the western border, in the hanging wall of the La Bajada fault zone, but locally extending 2-3 km east under the Cerros del Rio volcanic field; (3) older Tertiary volcanic and sedimentary rocks (Abiquiu?, Espinaso, and Galisteo Formations); (4) intrusive rocks of the Cerrillos intrusive center that are roughly coeval with the Espinaso volcanic rocks; and (5) Mesozoic sedimentary rocks ranging in age from the Upper Triassic Chinle Formation to the Upper Cretaceous Mancos Shale.

New Mexico↗

USGS2011

Late Holocene slip rate of the San Andreas fault and its accommodation by creep and moderate-magnitude earthquakes at Parkfield, California

Investigation of a right-laterally offset channel at the Miller's Field paleoseismic site yields a late Holocene slip rate of 26.2 +6.4/−4.3 mm/yr (1σ) for the main trace of the San Andreas fault at Parkfield, California. This is the first well-documented geologic slip rate between the Carrizo and creeping sections of the San Andreas fault. This rate is lower than Holocene measurements along the Carrizo Plain and rates implied by far-field geodetic measurements (∼35 mm/yr). However, the rate is consistent with historical slip rates, measured to the northwest, along the creeping section of the San Andreas fault (<30 mm/yr). The paleoseismic exposures at the Miller's Field site reveal a pervasive fabric of clay shear bands, oriented clockwise oblique to the San Andreas fault strike and extending into the uppermost stratigraphy. This fabric is consistent with dextral aseismic creep and observations of surface slip from the 28 September 2004 M6 Parkfield earthquake. Together, this slip rate and deformation fabric suggest that the historically observed San Andreas fault slip behavior along the Parkfield section has persisted for at least a millennium, and that significant slip is accommodated by structures in a zone beyond the main San Andreas fault trace.

California↗

USGS2014

Mode of igneous intrusion in La Plata Mountains, Colorado

The La Plata Mountains, in southwestern Colorado, have long been known as an example of a mountain group of the laccolithic type, although it has been recognized that the igneous geology was much more complex than that of typical laccoliths. A restudy of the ore‐deposits of the District, now in progress, has thrown new light on the mode of intrusion of the igneous rocks (E. B. Eckel, Resurvey of the geology and ore‐deposits of the La Plata Mining District, Colorado, Proc. Colorado Sci. Soc, v. 13, No. 9, pp. 508–546, 1936). The Mountains, which include parts of La Plata and Montezuma Counties, are 8 to 18 miles northwest of Durango and occupy an oval area 10 to 15 miles in diameter. The altitude ranges from about 8000 to 13,225 feet above sea‐level. ©1937. American Geophysical Union. All Rights Reserved.

Colorado↗

USGS1991

Late Cretaceous and early Tertiary plutonism and deformation in the Skagit Gneiss Complex, north Cascade Range, Washington and British Columbia

The Skagit Gneiss Complex forms a more-or-less continuous terrane within the northern, more deeply eroded part of the North Cascade Range. The complex comprises abundant plutons intruded at mid-crustal depths into a variety of metamorphosed supracrustal rocks of both oceanic and volcanic-arc origin. A plethora of syntectonic pegmatite, small plutons, and granitic dikes gives the complex a migmatitic aspect. U-Pb zircon ages from gneissic plutons within and near the Skagit Gneiss Complex indicate magmatic crystallization between 75 and 60 Ma. Deformation, recrystallization, and migmatization in part postdate intrusion of the 75-60 Ma plutons. This latest Cretaceous and earliest Tertiary plutonism and migmatization may reflect thermal relaxation following early Late Cretaceous orogeny documented else-where in the North Cascades. The complex was ductilely extended northwest-southeast shortly after intrusion of granite dikes at ∼45 Ma, but before emplacement of the earliest (∼34 Ma) plutons of the Cascade arc. Outcrops of Late Cretaceous and earliest Tertiary plutons, migmatites of the Skagit Gneiss Complex, and rocks with young ductile deformation are roughly coextensive, all apparently marking a region of greater middle Eocene unroofing. Unroofing was apparently contemporaneous with east-west extension in the Okanogan region to the east and north-south and northwest-southeast strike-slip faulting within the North Cascades.

Washington↗

USGS1973

Cretaceous mafic conglomerate near Gualala offset 350 miles by San Andreas fault from oceanic crustal source near Eagle Rest Peak, California

Upper Cretaceous mafic conglomerate and quartz-plagioclase arkose that crop out on the southwest side of the San Andreas fault near Gualala, Calif., may have been eroded from a gabbroic terrane that now lies about 350 miles to the southeast, on the opposite side of the San Andreas fault. The plagioclase arkose near Gualala contains little or no K-feldspar, and the conglomerate is characterized by quartz-bearing mafic rocks that lack K-feldspar volcanic rocks, diabase, and diorite to gabbro. Hornblendes from these clasts yield K/Ar ages of 141±4,175±7, and 186±7 m.y. The arkose and conglomerate appear to have been eroded from a chert-poor ophiolite (oceanic crust) sequence that, according to paleocurrent evidence, lay east of the present San Andreas fault. Near Eagle Rest Peak, 350 miles southeast of Gualala, similar mafic quartz-bearing volcanic rocks, diabase, and gabbro are exposed in a small structurally isolated area that abuts the San Andreas fault on the southwest. These rocks yield hornblende K/Ar ages of 134±4, 165±4, and 207±10 m.y. They may also be the source of two small fault slivers of similar mafic rocks, which yield hornblende K/Ar ages between 144 and 172 m.y. These slivers now lie 100 and 200 miles to the northwest along the San Andreas fault at Gold Hill and Logan.

California↗

USGS1999

Cruise report; RV Coastal Surveyor Cruise C1-99; multibeam mapping of the Long Beach, California continental shelf; April 12 through May 19, 1999

The greater Los Angeles area of California is home to more than 10 million people. This large population puts increased pressure on the adjacent offshore continental shelf and margin with activities such as ocean disposal for dredged spoils, explosive disposal, waste-water outfall, and commercial fishing. The increased utilization of the shelf and margin in this area has generated accelerated multi-disciplinary research efforts in all aspects of the environment of the coastal zone. Prior to 1996 there were no highly accurate base maps of the continental shelf and slope upon which the research activities could be located and monitored. In 1996, the United States Geological Survey (USGS) Pacific Seafloor Mapping Project began to address this problem by mapping the Santa Monica shelf and margin (Fig. 1) using a state-of-the-art, high-resolution multibeam sonar system (Gardner, et al., 1996; 1999). Additional seafloor mapping in 1998 provided coverage of the continental margin from south of Newport to the proximal San Pedro Basin northwest of Palos Verdes Peninsula (Gardner, et al., 1998) (Fig. 1). The mapping of the seafloor in the greater Los Angeles continental shelf and margin was completed with a 30-day mapping of the Long Beach shelf in April and May 1999, the subject of this report. The objective of Cruise C-1-99-SC was to completely map the broad continental shelf from the eastern end of the Palos Verdes Peninsula to the narrow shelf south of Newport Beach, from the break in slope at about 120-m isobath to the inner shelf at about the 10-m isobath. Mapping the Long Beach shelf was jointly funded by the U.S. Geological Survey and the County of Orange (CA) Sanitation District and was conducted under a Cooperative Agreement with the Ocean Mapping Group from the University of New Brunswick (OMG/UNB). The OMG/UNB contracted with C&C Technologies, Inc. of Lafayette, LA for use of the RV Coastal Surveyor and the latest evolution of high-resolution multibeam sonars, a dual Kongsberg Simrad EM3000D.

California↗

USGS1980

Minisparker profiles from Jeffreys Ledge and adjacent areas in the western Gulf of Maine

A total of 250 kilometers of single-channel seismic-reflection data (28 minisparker profiles) were collected in the coastal waters of Massachusetts, north of and immediately south of Cape Ann, and on the western flank of Jeffreys Ledge, western Gulf of Maine, during the September 1978 cruise of the R/V ASTERIAS. The survey was conducted by the U.S. Geological Survey as part of the Massachusetts Cooperative Marine Geologic Program. The seismic systems used included a 1Del Norte minisparker and streamer, an Energy International Streamer, and EPC 3200 and 4100 recorders. Navigational control was established by Radar and Loran-C. The Loran-C navigation data were recorded on a Northstar 6000 system. The purpose of the cruise was to discover the significance and extent of the folded and faulted internal reflections that were first noticed on the esternmost tip of Jeffreys Ledge in line 14 of esternmost tip of Jeffreys Ledge in line 14 of rninisparker data from the 1976 R/V FAY 023 cruise. Sixteen northwest-trending lines were run off Cape Ann to investigate the deformed reflectors, now thought to represent a moraine formed by readvance of continental ice over the last glacial marine Presurnpscot Formation. Lines north and south of Cape Ann were run to locate the offshore extension of the Clinton-Newbury and Bloody Bluff fault systems. The original records can be studied at the U.S. Geological Survey offices at Woods Hole, Mass. Microfilm copies of the records can be purchased only from the National Geophysical and Solar-Terrestrial Data Center, NOAA/EDIS/NGSDC, Code D621, 325 Broadway; Boulder, CO 80303 (303-497-6338)

Open-File Report↗