Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Nature Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

Groundwater quality near the Montebello Oil Field, Los Angeles County, California

Groundwater quality and potential sources and migration pathways of chemical constituents associated with hydrocarbon-bearing formations were assessed by the U.S. Geological Survey for the California State Water Resources Control Board Oil and Gas Regional Monitoring Program (RMP). Groundwater samples were collected as part of the RMP from 21 preexisting wells used for public supply, monitoring, or irrigation in and near the Montebello Oil Field and analyzed for constituents associated with hydrocarbon-bearing formations and constituents used to identify recently recharged groundwater and older groundwater. The newly collected RMP data were supplemented with historical sample data from 849 groundwater wells and analyzed with respect to explanatory factors that have the potential to influence water quality. Potential sources and migration pathways of fluids (water, gas, or oil) from hydrocarbon-bearing formations that could affect groundwater quality in the Montebello Oil Field include large volumes of recycled produced water (water withdrawn from an oil well and brought to the surface that may include oil, water, and gas from the geologic formation and water or gas injected for enhanced recovery) that have been reinjected since the 1960s to enhance oil production, oil and gas wells with well-integrity issues, and oil and gas wells with an uncemented annulus that intersects groundwater resource zones. Trace amounts of dissolved petroleum hydrocarbons, thermogenic gas (propane through pentane range), or both, were detected in seven groundwater samples collected in 2014 and 2018 as part of the RMP. Five of those samples also contained manufactured volatile organic compounds and at least some modern-age groundwater (recharged during or after 1953), indicating that the hydrocarbons could have originated from surficial, or shallow, sources unrelated to oil and gas development. Two samples contained low concentrations of petroleum hydrocarbons (less than 0.1 microgram per liter) and did not contain detections of manufactured volatile organic compounds in pre-modern groundwater. These samples were collected from relatively deep wells (greater than 140 meters below land surface) with perforations completed in marine sediments that may contain water with similar compositions to produced water. The RMP sample results and available historical data in and near the Montebello Oil Field did not provide conclusive evidence that oil and gas development has adversely affected groundwater resources. All samples with detectable petroleum hydrocarbons, thermogenic gases, or both, were collected from sites that also are within 500 meters of anthropogenic hydrocarbon sources not associated with oil and gas development or sources. In addition, naturally occurring sources of hydrocarbons that exist at intervals shallower than, or are in areas outside of, economically productive oil- and gas-producing zones could affect groundwater quality. A definitive analysis of relations of groundwater quality to potential anthropogenic and natural explanatory factors was not possible because of the low density of new and historical sampling data, particularly in parts of the Montebello Oil Field where the largest relative risks to groundwater from hydrocarbon-bearing formations exist. Areas to consider for more detailed monitoring and analysis in the future that may present the largest relative potential risks to groundwater quality include (1) areas downgradient from historical surface ponds and sumps and (2) areas with co-located high net injection (oil reservoir injection exceeds production), old oil and gas wells that may be more likely to develop well-integrity issues than newer wells, and oil and gas wells with uncemented boreholes intersecting groundwater zones. To help fill gaps resulting from sparse groundwater wells, temperature and resistivity borehole log data could be analyzed to locate anomalies that identify potential areas where relatively warm or saline water from deeper hydrocarbon-bearing formations is present in groundwater.

California↗

Groundwater quality and geochemistry of the western wet gas part of the Marcellus Shale Oil and Gas Play in West Virginia

Thirty rural residential water wells in the wet gas region of the Marcellus Shale oil and gas play in northwestern West Virginia were sampled by the U.S. Geological Survey (USGS) in 2018, in cooperation with West Virginia State agencies, to analyze for a range of water-quality constituents, including major ions, trace metals, radionuclides, bacteria, and methane and other dissolved hydrocarbon gases. The groundwater-quality data collected for this study were used to assess the overall quality of groundwater in the study area in relation to public drinking-water standards. The groundwater-quality data were also evaluated with respect to geology, well depth, topographic setting, and proximity to oil and gas wells to identify possible relations to these factors. The presence of total coliform bacteria in groundwater is a potential indicator of surface contamination. The presence of Escherichia coli bacteria is indicative of fecal contamination of groundwater from either human or animal sources and may be considered an indicator of other related pathogens such as viruses. Total coliforms were detected in 26 of the 30 (87 percent) wells sampled. Eleven of the 30 (37 percent) wells sampled had detections of Escherichia coli bacteria. Sodium concentrations in 24 of 30 (80 percent) samples exceeded the U.S. Environmental Protection Agency (EPA) 20-milligram per Liter (mg/L) health-based value (HBV). Manganese, aluminum, and iron concentrations exceeded the EPA 50, 2.0, and 300 micrograms per liter (μg/L) secondary maximum contaminant level (SMCL) drinking-water standards at 14 (47 percent), 7 (23 percent), and 5 (17 percent) of the 30 wells sampled. Two of the 30 (7 percent) wells sampled had concentrations of manganese that exceeded the 300-μg/L USGS health-based screening level (HBSL). Arsenic concentrations at 7 of 30 (23 percent) wells sampled exceeded the 10-μg/L EPA maximum contaminant level (MCL) health-based drinking water standard. The EPA maximum contaminant level goal (MCLG) for arsenic is 0 μg/L and 29 of 30 wells sampled contained detectable concentrations of arsenic. None of the 30 wells sampled exceeded the U.S. Office of Surface Mining Reclamation and Enforcement (OSMRE) 28-mg/L immediate action level (IAL) for methane in groundwater and only 1 of 30 (3 percent) sites exceeded the 10-mg/L OSMRE level of concern (LOC) for methane in groundwater. Of the 28 wells sampled for radon-222 all 28 (100 percent) exceeded the EPA proposed 300-picocuries per liter (pCi/L) MCL for radon. None of the samples exceeded the 4,000-pCi/L alternate maximum contaminant level (AMCL) which is applicable to public drinking water systems that have adopted radon mitigation programs. Wilcoxon Signed Rank Tests indicated statistically significant differences at a 95 percent confidence interval (p less than 0.05) in radium-226, barium, and ethane groundwater concentrations with respect to the density of oil and gas wells present within a 500-meter (m) radius around the rural residential wells sampled for the study. Samples from residential wells that had four or fewer oil and gas wells in the surrounding 500-m radius had statistically lower concentrations of radium-226, bromide, and ethane than samples from residential wells sampled that had five or more oil and gas wells in the surrounding 500-m radius. Given the available data, the relationship between concentrations of radium-226, bromide, and ethane for wells sampled in this study and oil and gas development or natural geochemical processes is not clear. Groundwater-age tracers (chlorofluorocarbons, tritium, and sulfur hexafluoride) were sampled at 17 of the 30 wells. All 17 samples contained a fraction of young, post-1950s groundwater. Many of the groundwater samples collected for this study have high calcium to sodium ratios and low total dissolved solids concentrations, indicating they are dominated by recently recharged water. A subset of samples had chloride to bromide mass ratios between 70 and 200, indicating that deep Appalachian basin brines mixed with the shallow groundwater. For most of the samples in this study, the C 1 through C 6 hydrocarbons have characteristics that reflect a biogenic gas signature that has, to varying degrees, undergone oxidation processes during transport. None of the samples show a characteristic thermogenic cracking pattern among the hydrocarbon ratios.

West Virginia↗

Methods to characterize environmental settings of stream and groundwater sampling sites for National Water-Quality Assessment

Characterization of natural and anthropogenic features that define the environmental settings of sampling sites for streams and groundwater, including drainage basins and groundwater study areas, is an essential component of water-quality and ecological investigations being conducted as part of the U.S. Geological Survey's National Water-Quality Assessment program. Quantitative characterization of environmental settings, combined with physical, chemical, and biological data collected at sampling sites, contributes to understanding the status of, and influences on, water-quality and ecological conditions. To support studies for the National Water-Quality Assessment program, a geographic information system (GIS) was used to develop a standard set of methods to consistently characterize the sites, drainage basins, and groundwater study areas across the nation. This report describes three methods used for characterization-simple overlay, area-weighted areal interpolation, and land-cover-weighted areal interpolation-and their appropriate applications to geographic analyses that have different objectives and data constraints. In addition, this document records the GIS thematic datasets that are used for the Program's national design and data analyses.

Scientific Investigations Report↗

Inorganic chemical investigation by x-ray fluorescence analysis: The Viking Mars Lander

The inorganic chemical investigation added in August 1972 to the Viking Lander scientific package will utilize an energy-dispersive X-ray fluorescence spectrometer in which four sealed, gas-filled proportional counters will detect X-rays emitted from samples of the Martian surface materials irradiated by X-rays from radioisotope sources ( 55 Fe and 109 Cd). The output of the proportional counters will be subjected to pulse-height analysis by an on-board step-scanning single-channel analyzer with adjustable counting periods. The data will be returned to Earth, via the Viking Orbiter relay system, and the spectra constructed, calibrated, and interpreted here. The instrument is inside the Lander body, and samples are to be delivered to it by the Viking Lander Surface Sampler. Calibration standards are an integral part of the instrument. The results of the investigation will characterize the surface materials of Mars as to elemental composition with accuracies ranging from a few tens of parts per million (at the trace-element level) to a few percent (for major elements) depending on the element in question. Elements of atomic number 11 or less are determined only as a group, though useful estimates of their individual abundances maybe achieved by indirect means. The expected radiation environment will not seriously hamper the measurements. Based on the results, inferences can be drawn regarding (1) the surface mineralogy and lithology; (2) the nature of weathering processes, past and present, and the question of equilibrium between the atmosphere and the surface; and (3) the extent and type of differentiation that the planet has undergone. The Inorganic Chemical Investigation supports and is supported by most other Viking Science investigations.

Icarus↗

Vascular Plant and Vertebrate Inventory of Saguaro National Park, Tucson Mountain District

This report summarizes the results of the first comprehensive inventory of plants and vertebrates at the Tucson Mountain District (TMD) of Saguaro National Park, Arizona. From 2001 to 2003 we surveyed for vascular plants and vertebrates (amphibians, reptiles, birds, and mammals) at the district to document the presence of species within its boundaries. Park staff also carried out extensive infrared-triggered camera work for medium and large mammals from 2002-2005 and results from that effort are reported here. Our spatial sampling design for all taxa employed a combination of random and nonrandom survey sites. Survey effort was greatest for medium and large mammals and herpetofauna. Because we used repeatable study designs and standardized field methods, these inventories can serve as the first step in a biological monitoring program for the district. We also provide an overview of previous survey efforts in the district. We use data from our inventory and other surveys to compile species lists and to assess inventory completeness. The survey effort for herpetofauna, birds, and medium and large mammals was the most comprehensive ever undertaken in the district. We recorded a total of 320 plant and vertebrate species, including 21 species not previously found in the district (Table 1). Based on a review of our inventory and past research at the district, there have been a total of 723 species of plants and vertebrates found there. We believe inventories for most taxonomic groups are nearly complete. Based on our surveys, we believe the native plant and vertebrate community compositions of the district are relatively intact, though some species loss has occurred and threats are increasing, particularly to herpetofauna and larger mammals. Of particular note is the relatively small number of non-native species and their low abundance in the district, which is in contrast to many nearby natural areas. Rapidly expanding development on the west, north, and east sides of the district is cause for concern that the park continue its commitment to environmental restoration, which is largely responsible for reducing the threats posed by non-native plants. With continued maintenance of natural processes and the ecological structure of the park's biodiversity, the park will become an increasingly important place to both the general public and the scientific community. This report supersedes results reported in Powell et al. (2002, 2003).

Open-File Report↗

National water-quality assessment program : the Albemarle- Pamlico drainage

In 1991, the U.S. Geological Survey (USGS) began to implement a full-scale National Water-Quality Assessment (NAWQA) program. Long-term goals of the NAWQA program are to describe the status and trends in the quality of a large, representative part of the Nation's surface- and ground-water resources and to provide a sound, scientific understanding of the primary natural and human factors affecting the quality of these resources. In meeting these goals, the program will produce a wealth of water quality information that will be useful to policy makers and managers at the national, State, and local levels. Study-unit investigations constitute a major component of the NAWQA program, forming the principal building blocks on which national-level assessment activities are based. The 60 study-unit investigations that make up the program are hydrologic systems that include parts of most major river basins and aquifer systems. These study units cover areas of 1,200 to more than 65,000 square miles and incorporate about 60 to 70 percent of the Nation's water use and population served by public water supply. In 1991, the Albemarle-Pamlico drainage was among the first 20 NAWQA study units selected for study under the full-scale implementation plan. The Albemarle-Pamlico drainage study will examine the physical, chemical, and biological aspects of water quality issues in a coordinated investigation of surface water and ground water in the Albemarle-Pamlico drainage basin. The quantity and quality of discharge from the Albemarle-Pamlico drainage basin contribute to some water quality problems in the biologically sensitive waters of Albemarle and Pamlico Sounds. A retrospective analysis of existing water quality data will precede a 3-year period of intensive data-collection and analysis activities. The data resulting from this study and the improved understanding of important processes and issues in the upstream part of the study unit will enhance understanding of the quality of water in Albemarle-Pamlico Sounds, the second largest estuarine system in the United States.

Open-File Report↗

Potentiometric surface of the Mississippi River Valley alluvial aquifer, spring 2016

A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer using selected available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time after installation, but some wells were measured more than one time or continually; streamgages are typically operated continuously. Personnel from the Arkansas Natural Resources Commission, Arkansas Department of Health, Arkansas Geological Survey, Illinois Department of Agriculture, Illinois State Water Survey, Louisiana Department of Natural Resources, Louisiana Department of Transportation and Development, Mississippi Department of Environmental Quality, Yazoo Mississippi Delta Joint Water Management District, U.S. Department of Agriculture–Natural Resources Conservation Service, and the U.S. Geological Survey (USGS) routinely collect groundwater data from wells screened in the MRVA aquifer. The USGS and the U.S. Army Corps of Engineers routinely collect data on river stage and discharge for the rivers overlying the MRVA aquifer. The potentiometric surface map for 2016 was created using existing data as part of the USGS Water Availability and Use Science Program to support investigations that characterize the MRVA aquifer. Sufficient groundwater-altitude data were available to create a potentiometric-surface map for spring 2016 for about 81 percent of the aquifer area. The potentiometric contours ranged from 10 to 340 feet. The regional direction of groundwater flow in the MRVA aquifer was generally towards the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flows into the depressions, and near rivers, where groundwater flow generally parallels the flow in the rivers. There are large depressions in the potentiometric surface of the MRVA aquifer in the lower half of the Cache region and in most of the Grand Prairie and Delta regions.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

U.S. Geological Survey Activities Related to American Indians and Alaska Natives Fiscal Year 2001

Information is a resource that can help Native American governments and their people. The U.S. Geological Survey (USGS) makes available technical expertise, reports, and other impartial information sources that can benefit Native Americans interested in subsistence issues, water, land use, and the health of many parts of the environment. The USGS works in cooperation with American Indian and Alaska Native governments, conducting research on water and mineral resources, animals and plants of environmental, economic, or subsistence importance, natural hazards, and geologic resources. Digital data on cartography, mineral resources, stream flow, biota, and other topics are available to American Indian and Alaska Native individuals and institutions. The USGS recognizes the need to learn from and share knowledge with Native peoples. This report describes most of the activities that the USGS conducted with American Indian and Alaska Native governments, educational institutions, and individuals during Federal fiscal year 2001. Some of these USGS activities were carried out in concert with the Bureau of Indian Affairs (BIA). Others were conducted by Tribes and the USGS. In 2001, the USGS began examining its activities related to American Indians and Alaska Natives to determine how it can better serve these customers within its mandates. A growing number of Tribal governments, educational institutions, and other Tribal organizations have begun using geographic information systems and other digital technologies in recent years. As Tribes become more interested in and more adept at managing digital information, they are seeking relevant data from the USGS more frequently. Using digital technologies provides Tribal governments with additional means of managing lands and resources for the benefit of current and future generations. The USGS recognizes the need to make its information available to Tribal governments, and to work with those governments and other institutions to advance data management capabilities. The USGS is responding to this need by increasing the transfer of scientific information to American Indian and Alaska Native governments and by training employees of those governments to conduct and improve scientific studies. The USGS is also encouraging American Indians and Alaska Natives to pursue careers in science, and seeking ways to hire Indian and Native students. By identifying, improving, and disseminating information about available hiring mechanisms, the USGS is working to make hiring such students easier, and therefore more likely, for USGS managers. The U.S. Geological Survey is the Federal science bureau within the Department of the Interior (DoI). The USGS is non-regulatory and is not a significant manager of Federal or Trust lands or assets. However, there are two types of USGS activities that do involve American Indians, Alaska Natives, and their lands. The first type of activity is the course of formal studies, conducted through existing USGS programs, that involves collection of specific types of data as well as investigative and research projects. These projects typically last 2 or 3 years, although a few are parts of longer-term activities. Some projects are funded through cooperative agreements, from monies provided to the USGS by individual Tribal governments or by the BIA. The USGS provides matching funds for cooperative projects. These formal projects may also receive funding from the U.S. Environmental Protection Agency, the Indian Health Service (part of the Department of Health and Human Services), or other Federal agencies. The USGS routinely works with its sister bureaus in the Department of the Interior to provide the scientific information and expertise needed to meet the Department's science priorities. Within this context, the USGS and the BIA are cooperating to use USGS information resources to benefit American Indian and Alaska Native peoples and their lands. The second type of USGS activity is less formal, based on initiatives designed and conducted by USGS employees. Frequently involving educational activities, these endeavors are prompted by employee interests, often as collateral issues, that result from one or more USGS employees identifying and responding to an observed need. In these activities, USGS employees help fulfill a mission of the USGS-to make science relevant-while helping their fellow citizens. USGS employees have also taken the initiative in assisting American Indians and Alaska Natives through participation in several organizations that were created to foster awareness of science among Native peoples and to help build support and communication networks. One such group is the American Indian Science and Engineering Society (AISES). This group sponsors an annual national meeting in which USGS employees participate. USGS employees join this organization on a voluntary basis, bringing the benefits of this expanded network to the USGS, as many employees do with other professional organizations. Each part of the USGS has identified an American Indian/Alaska Native liaison. Furthermore, the USGS has instituted a regional organizational structure, with Western, Central, and Eastern Regions. The regions work in concert with specific scientific disciplines to conduct the scientific mission of the USGS. The regional structure is intended to bring us closer to our customers; we hope that Native Americans and Alaska Natives will use the contacts listed at the end of this report.

Report↗

Geologic resource evaluation of Kaloko-Honokohau National Historical Park, Hawai'i: Geology and coastal landforms

Geologic resource inventories of lands managed by the National Park Service (NPS) are important products for the parks and are designed to provide scientific information to better manage park resources. Park-specific geologic reports are used to identify geologic features and processes that are relevant to park ecosystems, evaluate the impact of human activities on geologic features and processes, identify geologic research and monitoring needs, and enhance opportunities for education and interpretation. These geologic reports are planned to provide a brief geologic history of the park and address specific geologic issues that link the park geology and the resource manager. The Kona coast National Parks of the Island of Hawai'i are intended to preserve the natural beauty of the Kona coast and protect significant ancient structures and artifacts of the native Hawaiians. Pu'ukohola Heiau National Historic Site (PUHE), Kaloko-Honokohau National Historical Park (KAHO), and Pu'uhonua O Honaunau National Historical Park (PUHO) are three Kona parks studied by the U.S. Geological Survey (USGS) Coastal and Marine Geology Team in cooperation with the National Park Service. This report is one of six related reports designed to provide geologic and benthic-habitat information for the three Kona parks. Each geology and coastal-landform report describes the regional geologic setting of the Hawaiian Islands, gives a general description of the geology of the Kona coast, and presents the geologic setting and issues for one of the parks. The related benthic-habitat mapping reports discuss the marine data and habitat classification scheme, and present results of the mapping program. Kaloko-Honokohau National Historical Park (KAHO) was established in 1978 in order to preserve and protect traditional native Hawaiian culture and cultural sites. The park is the site of an ancient Hawaiian settlement, occupies 469 ha and is considered a locale of considerable cultural and historical significance. Cultural resources include fishponds, petroglyphs and a heiau (religious site). The fishponds are also recognized as exceptional birding areas and are important wetlands for migratory birds. The ocean and reef have been designated as a Marine Area Reserve, where green sea turtles commonly come ashore to rest. The park is also a valuable recreational resource, with approximately 4 km of coastline and a protective cove ideal for snorkeling and swimming. KAHO park boundaries extend beyond the mean high tide line and include the adjacent marine environment. An accompanying report for KAHO presents the results of benthic habitat mapping of the offshore waters, from the shoreline to approximately 40 m water depth. Ground-water quality and potential downslope impacts created by development around the park are of concern to Park management.

Hawaii↗

Bathymetry and vegetation in isolated marsh and cypress wetlands in the northern Tampa Bay Area, 2000-2004

Wetland bathymetry and vegetation mapping are two commonly used lines of evidence for assessing the hydrologic and ecologic status of expansive coastal and riverine wetlands. For small isolated freshwater wetlands, however, bathymetric data coupled with vegetation assessments are generally scarce, despite the prevalence of isolated wetlands in many regions of the United States and the recognized importance of topography as a control on inundation patterns and vegetation distribution. In the northern Tampa Bay area of west-central Florida, bathymetry was mapped and vegetation was assessed in five marsh and five cypress wetlands. These 10 isolated wetlands were grouped into three categories based on the effects of ground-water withdrawals from regional municipal well fields: natural (no effect), impaired (drier than natural), and augmented (wetlands with artificially augmented water levels). Delineation of the wetland perimeter was a critical component for estimating wetland-surface area and stored water volume. The wetland perimeter was delineated by the presence of Serenoa repens (the 'palmetto fringe') at 9 of the 10 sites. At the 10th site, where the palmetto fringe was absent, hydric-soils indicators were used to delineate the perimeter. Bathymetric data were collected using one or more techniques, depending on the physical characteristics of each wetland. Wetland stage was measured hourly using continuous stage recorders. Wetland vegetation was assessed semiannually for 2 1/2 years in fixed plots located at three distinct elevations. Vegetation assessments were used to determine the community composition and the relative abundance of obligate, facultative wet, and facultative species at each elevation. Bathymetry maps were generated, and stage-area and stage-volume relations were developed for all 10 wetlands. Bathymetric data sets containing a high density of data points collected at frequent and regular spatial intervals provided the most useful stage-area and stage-volume relations. Bathymetric maps of several wetlands also were generated using a low density of data points collected along transect lines or contour lines. In a comparative analysis of the three mapping approaches, stage-area and stage-volume relations based on transect data alone underestimated (by 50-100 percent over certain ranges of stage) the wetland area and volume compared to results using a high density of data points. Adding data points collected along one elevation contour below the wetland perimeter to the transect data set greatly improved the agreement of the resulting stage-area and stage-volume relations to the high-density mapping approach. Stage-area relations and routinely monitored stage data were used to compare and contrast the average flooded area in a natural marsh and an impaired marsh over a 2-year period. Vegetation assessments used together with flooded-area information provided the potential for extrapolating vegetation results from points or transects to wetlands as a whole. A comparison of the frequency of flooding of different areas of the wetland and the species composition in vegetation plots at different elevations indicated the dependence of vegetation on inundation frequency. Because of the broad tolerances of many wetlands plants to a range of inundation conditions, however, vegetation assessments alone provided less definitive evidence of the hydrologic differences between the two sites, and hydrologic changes occurring during the 2 years, than the flooded-area frequencies. Combining flooded-area frequencies with vegetation assessments could provide a more versatile and insightful approach for determining the ecological status of wetlands than using vegetation and stage data alone. Flooded-area frequencies may further provide a useful approach for assessing the ecological status of wetlands where historical vegetation surveys and stage data are lacking. Comparing the contemporary flooded-area frequencies a

Scientific Investigations Report↗

Low-flow characteristics of streams from Wailua to Hanapēpē, Kauaʻi, Hawaiʻi

The purpose of this study is to characterize streamflow availability under natural (unregulated) low-flow conditions for streams in southeast Kaua‘i, Hawai‘i. The nine main study-area basins, from north to south, include Wailua River, Hanamā‘ulu, Nāwiliwili, Pūʻali, Hulēʻia, Waikomo, Lāwaʻi, and Wahiawa Streams, and Hanapēpē River. The results of this study can be used by water managers to develop technically sound instream-flow standards for the study-area streams. Low-flow characteristics for natural streamflow conditions were represented by flow-duration discharges that are equaled or exceeded between 95 and 50 percent of the time. Short-term continuous-record stream-gaging stations that monitored low flows on Waiahi and right branch Lāwaʻi Streams were established to serve as potential index stations for partial-record sites in the study area. Continuous-record stream-gaging station on Hanapēpē River monitored natural flow during calendar year 2017 and the streamflow record during that period was used to estimate low-flow characteristics at the station. Partial-record sites were established on 3 main streams and 15 tributary streams, upstream from existing surface-water diversions. Low-flow characteristics were determined using historical and current streamflow data from continuous-record stream-gaging stations and miscellaneous sites, as well as additional data collected as part of this study. Low-flow-duration discharges for the following streams were estimated for the 59-year base period (water years 1961–2019) using two record-augmentation techniques: right branch ʻŌpaekaʻa Stream, North Fork Wailua River, north and south fork Waikoko Streams, ‘Ili‘ili‘ula Stream, north and south fork Hanamāʻulu Streams, Kamo‘oloa Stream, Pāohia Stream, Ku‘ia Stream, Lāwa‘i Stream, Wahiawa Stream, and Hanapēpē River. The 95-percent flow-duration discharges (Q 95 ) ranged from 0.018 to 42 cubic feet per second (ft 3 /s). The 50-percent flow-duration discharges (Q 50 ) ranged from 1.1 to 69 ft 3 /s. Upper-bound estimates of low-flow duration discharges at partial-record sites on south fork Hanamāʻulu, Hanamāʻulu tributary, ʻŌmaʻo, and Pōʻeleʻele Streams were estimated based on the highest discharges measured as part of this study during Q 95 to Q 50 flow conditions, which were 0.44, 0.40, 0.19, and 0.22 ft 3 /s, respectively. Measured discharges on Nāwiliwili, Pū‘ali, and left branch Wahiawa Streams do not correlate with data at any active long-term continuous-record stream-gaging stations (10 or more complete water years of natural-flow record) and therefore low-flow duration discharges could not be estimated. This study also estimated streamflow gains and losses using seepage-run discharge measurements in eight of the nine study basins (Pūʻali Stream basin was excluded). A majority of the streams gained flow downstream from the uppermost diversions. Measured seepage-gain rates ranged between 0.03 and 24.3 ft 3 /s per mile of stream reach. Seepage gains are presumed to originate mainly from groundwater discharge in the Wailua River, Hanamā‘ulu Stream, Nāwiliwili Stream, Hulēʻia Stream, Lāwa‘i Stream, Wahiawa Stream, and Hanapēpē River basins. Under natural-flow conditions and flow conditions of the seepage runs, a majority of the study-area streams flow continuously from the mountains to the ocean. Where a stream discharges into a reservoir––Hanamā‘ulu and Wahiawa Streams––a dry reach may occur immediately downstream from the reservoir to the point of seepage gain in the stream.

Hawaii↗

Geospatial Information Response Team

Extreme emergency events of national significance that include manmade and natural disasters seem to have become more frequent during the past two decades. The Nation is becoming more resilient to these emergencies through better preparedness, reduced duplication, and establishing better communications so every response and recovery effort saves lives and mitigates the long-term social and economic impacts on the Nation. The National Response Framework (NRF) (http://www.fema.gov/NRF) was developed to provide the guiding principles that enable all response partners to prepare for and provide a unified national response to disasters and emergencies. The NRF provides five key principles for better preparation, coordination, and response: 1) engaged partnerships, 2) a tiered response, 3) scalable, flexible, and adaptable operations, 4) unity of effort, and 5) readiness to act. The NRF also describes how communities, tribes, States, Federal Government, privatesector, and non-governmental partners apply these principles for a coordinated, effective national response. The U.S. Geological Survey (USGS) has adopted the NRF doctrine by establishing several earth-sciences, discipline-level teams to ensure that USGS science, data, and individual expertise are readily available during emergencies. The Geospatial Information Response Team (GIRT) is one of these teams. The USGS established the GIRT to facilitate the effective collection, storage, and dissemination of geospatial data information and products during an emergency. The GIRT ensures that timely geospatial data are available for use by emergency responders, land and resource managers, and for scientific analysis. In an emergency and response capacity, the GIRT is responsible for establishing procedures for geospatial data acquisition, processing, and archiving; discovery, access, and delivery of data; anticipating geospatial needs; and providing coordinated products and services utilizing the USGS' exceptional pool of geospatial experts and equipment.

Fact Sheet↗

Data sources and methods for digital mapping of eight valley-fill aquifer systems in upstate New York

Digital hydrogeologic maps were developed in eight study areas in upstate New York by the U.S. Geological Survey in cooperation with the New York State Department of Environmental Conservation. The digital maps define the hydrogeologic framework of the valley-fill aquifers and surrounding till-covered uplands in the vicinity of the villages of Ellenville and Wurtsboro and hamlets of Woodbourne and South Fallsburg in Sullivan and Ulster Counties, town of Greene in Chenango County, city of Cortland and town of Cincinnatus in Cortland County, city of Jamestown in Chautauqua County, city of Olean and village of Ellicottville in Cattaraugus County, and villages of Fishkill and Wappinger Falls in Dutchess County. The hydrogeologic framework provided the foundation for groundwater-flow models that were used in the delineation of areas contributing groundwater flow to production wells screened in four of the eight valley-fill aquifers considered in this study. The hydrogeologic framework for the other four study areas was developed for potential future use in groundwater contributing-area studies. Data used in the creation of all digital surfaces and thicknesses included published surficial geology; aquifer maps and hydrogeologic sections; light detection and ranging (lidar) datasets; the Soil Survey Geographic Database; and lithologic well logs from the National Water Information System, New York State Department of Environmental Conservation, New York State Department of Transportation, and Empire State Organized Geologic Information System databases. Digital maps of the surficial geology; thickness of the surficial sand and gravel aquifers; and tops of the confining lacustrine silt and clay units, confined sand and gravel aquifers, and bedrock surfaces were created by using ArcGIS (a geographic information system). All surfaces and thicknesses were generated by using one of the following ArcGIS interpolation tools: Topo to Raster, Natural Neighbors, Kriging, or Empirical Bayesian Kriging. The datasets developed in this study provide a greater understanding of the underlying hydrogeologic framework in glacial valley-fill aquifers and can be applied in the evaluation of groundwater-supply development and protection.

New York↗

Urban growth in American cities : glimpses of U.S. urbanization

The Earth's surface is changing rapidly. Changes are local, regional, national, and even global in scope. Some changes have natural causes, such as earthquakes or drought. Other changes, such as urban expansion, agricultural intensification, resource extraction, and water resources development, are examples of human-induced change that have significant impact upon people, the economy, and resources. The consequences that result from these changes are often dramatic and widespread (Buchanan, Acevedo, and Zirbes, 2002) It is the role of the U.S. Geological Survey (USGS) to provide useful and relevant scientific information both to the agencies within the Department of the Interior and to the Nation in general. In an effort to comply with this task, USGS scientists are assessing the status of, and the trends in, the Nation's land surface. This assessment provides useful information for regional and national land use decisionmaking. This knowledge can be used to deal with issues of significance to the Nation, such as quality-of-life, ecology of urban environments, ecosystem health, ecological integrity, water quality and quantity concerns, resource availability, vulnerability to natural hazards, safeguards to human health, air and land quality, and accessibility to scientific information. Results of these assessments can also be analyzed to reveal rates and trends in land use change. Results from urban growth studies provide a firm foundation for continuing research that explores the consequences of human modification of the landscape. The USGS seeks to illustrate and explain the spatial history of urban growth and corresponding land use change. Scientists are studying urban environments from a regional perspective and a time scale of decades to measure the changes that have occurred in order to help understand the impact of anticipated changes in the future. Within this booklet are pairs of images of selected urbanized regions from across the Nation. These image pairs illustrate the transformation that these areas have undergone over two decades. Specifically, they depict changes in the extent of urban land. Each change pair is composed of one image from the 1970s and one image from the 1990s. Accompanying each image pair is a brief historical geography of factors that helped facilitate major changes that have occurred since the founding of the main city and the consequences and challenges of regional urban growth. The goal of this publication is to provide an illustration of urban change that is easily understood by a broad audience. The images used throughout this booklet were generated from land cover data developed by the USGS. The data sources include the Geographic Information Retrieval and Analysis System (GIRAS) for the 1970s images and the National Land Cover Dataset (NLCD) for the 1990s images. GIRAS digital maps are based on photointerpretations completed in the mid-1970s. The NLCD is a land cover dataset for the conterminous United States based on 1992 Landsat thematic mapper (TM) satellite imagery and supplemental data (fig. 1a and fig. 1b). The USGS distributes both of these land use and land cover digital datasets. The images were developed by using a geographic information system (GIS). The GIRAS and NLCD datasets were used to identify urban land within each region. In the final images all urban areas are shown in red. A shaded-relief map of each region was used to display the topographic context of the red polygon coverage. For all of these images, urban land is defined as areas transformed into a built-up environment for human use. It includes residential areas, commercial and industrial developments, transportation features, and institutions.

Circular↗

Geologic resource evaluation of Pu'ukohola Heiau National Historic Site, Hawai'i; Part I, geology and coastal landforms

Geologic resource inventories of lands managed by the National Park Service (NPS) are important products for the parks and are designed to provide scientific information to better manage park resources. Park-specific geologic reports are used to identify geologic features and processes that are relevant to park ecosystems, evaluate the impact of human activities on geologic features and processes, identify geologic research and monitoring needs, and enhance opportunities for education and interpretation. These geologic reports are planned to provide a brief geologic history of the park and address specific geologic issues forming a link between the park geology and the resource manager. The Kona coast National Parks of the Island of Hawai'i are intended to preserve the natural beauty of the Kona coast and protect significant ancient structures and artifacts of the native Hawaiians. Pu'ukohola Heiau National Historic Site (PUHE), Kaloko-Honokohau National Historical Park (KAHO), and Pu'uhonua O Honaunau National Historical Park (PUHO) are three Kona parks studied by the U.S. Geological Survey (USGS) Coastal and Marine Geology Team in cooperation with the National Park Service. This report is one of six related reports designed to provide geologic and benthic-habitat information for the three Kona parks. Each geology and coastal-landform report describes the regional geologic setting of the Hawaiian Islands, gives a general description of the geology of the Kona coast, and presents the geologic setting and issues for one of the parks. The related benthic-habitat mapping reports discuss the marine data and habitat classification scheme, and present results of the mapping program. Pu'ukohola Heiau National Historic Site (PUHE) is the smallest (~86 acres) of three National Parks located on the leeward Kona coast of the Island of Hawai'i. The main structure at PUHE, Pu'ukohola Heiau, is an important historical temple that was built during 1790-91 by King Kamehameha I (also known as Kamehameha the Great) and is often associated with the founding of the Hawaiian Kingdom (Greene, 1993). The temple was constructed to incur the favor of the king's personal war god Kuka'ilimoku during the time that Kamehameha I waged several battles in an attempt to extend his control over all the Hawaiian Islands. The park is also the site of the older Mailekini Heiau, which was used by the ancestors of Kamehameha I, and an offshore, submerged temple, Hale O Kapuni Heiau, that was dedicated to the shark god. The park occupies the scenic Hill of the Whale overlooking Kawaihae Bay and Pelekane Beach. The seaward-sloping lands of PUHE lie at the convergence of lava flows formed by both Mauna Kea and Kohala Volcanoes. The park coastline is mostly rocky, with the exception of a small beach developed at the north boundary where an intermittent stream enters the sea. The park is bounded to the north by Kawaihae Harbor, to the south by Samuel M. Spencer Beach Park, and to the west by a broad submerged reef. The adjacent reef area is discussed in detail in the accompanying report by Cochran and others (2006). They mapped from the shoreline to depths of approximately 40 m, where the shelf drops off to a sand-covered bottom. PUHE park boundaries extend only to the mean high-tide line, however, landscape impacts created by development around the park are of concern to Park management.

Hawaii↗

Geologic resource evaluation of Pu'uhonua O Honaunau National Historical Park, Hawai'i; Part I, geology and coastal landforms

Geologic resource inventories of lands managed by the National Park Service (NPS) are important products for the parks and are designed to provide scientific information to better manage park resources. Park-specific geologic reports are used to identify geologic features and processes that are relevant to park ecosystems, evaluate the impact of human activities on geologic features and processes, identify geologic research and monitoring needs, and enhance opportunities for education and interpretation. These geologic reports are planned to provide a brief geologic history of the park and address specific geologic issues forming a link between the park geology and the resource manager. The Kona coast National Parks of the Island of Hawai'i are intended to preserve the natural beauty of the Kona coast and protect significant ancient structures and artifacts of the native Hawaiians. Pu'ukohola Heiau National Historic Site (PUHE), Kaloko-Honokohau National Historical Park (KAHO), and Pu'uhonua O Honaunau National Historical Park (PUHO) are three Kona parks studied by the U.S. Geological Survey (USGS) Coastal and Marine Geology Team in cooperation with the National Park Service. This report is one of six related reports designed to provide geologic and benthic-habitat information for the three Kona parks. Each geology and coastal-landform report describes the regional geologic setting of the Hawaiian Islands, gives a general description of the geology of the Kona coast, and presents the geologic setting and issues for one of the parks. The related benthic-habitat mapping reports discuss the marine data and habitat classification scheme, and present results of the mapping program. Pu'uhonua O Honaunau National Historical Park ('Place of Refuge of Honaunau') is the southernmost of the three National Parks located on the leeward Kona coast of the Island of Hawai'i. It is a relatively small park originally 73 ha (182 acres), and was expanded in 2006 with the acquisition of an additional 96 ha (238 acres). The park is probably best known for the pu'uhonua (place of refuge) native Hawaiian cultural site. In addition to the pu'uhonua, the park contains palace grounds, royal fishponds, burial sites, prehistoric trails, a royal canoe landing area, stone house platforms and associated temple structures. A massive basalt rock wall (300 m long, 3 m high, and 5 m wide) separates the pu'uhonua from the areas used by Hawaiian royalty and other grounds. Honaunau Bay is a popular marine resource area adjacent to the park. The seaward-sloping lands of PUHO lie at the base of Mauna Loa volcano, which forms a bench of low-lying pahoehoe lava flows at Pu'uhonua Point. The park coastline is approximately 1.6 km long and is mostly rocky with the exception of a small artificially nourished beach at Keone'ele Cove at the northern boundary next to Honaunau Bay. The park is bounded to the south by Ki'ilae Bay and includes the coastal portions of three Hawaiian land divisions (ahupua'a): Honaunau, Keokea, and Ki'ilae. The western boundary is the high tide mark. The waters of Keone'ele Cove, the ancient royal canoe landing at PUHO, while not formally under NPS jurisdiction, are managed by the park under an agreement with the State of Hawai'i. This small embayment is a known haven for sea turtles, which are often found sunning themselves on the nearshore volcanic platform. Impacts to this area include frequent visits by scuba divers and snorkelers to Honaunau Bay and a small boat ramp located just to the north of Keone'ele Cove. There is an accompanying report that presents the results of benthic habitat mapping of the offshore waters for PUHO (Cochran and others, 2006b; linked below). They mapped from the shoreline to depths of approximately 40 m, where the shelf drops off to a sand-covered bottom. PUHO park boundaries extend only to the mean high-tide level; however, landscape impacts created by development around the park are of concern to

Hawaii↗

Spring types and contributing aquifers from water-chemistry and multivariate statistical analyses for seeps and springs in Theodore Roosevelt National Park, North Dakota, 2018

Water resources in Theodore Roosevelt National Park, North Dakota, support wildlife, visitors, and staff, and play a vital role in supporting the native ecology of the park. The U.S. Geological Survey, in cooperation with the National Park Service, completed field work in 2018 for a study to address concerns about water availability and possible sources of groundwater contamination for seeps and springs in Theodore Roosevelt National Park. The objective of the study was to improve hydrologic knowledge and determine the water composition of 11 seeps and springs in the park by collecting water-chemistry data at springs, streams, wells, and rain collectors. Water samples were collected at 26 sites at springs, streams, wells, and rain collectors in the North and South Units of Theodore Roosevelt National Park. Samples in the North Unit were collected at 5 springs, 1 stream, 2 wells, and 1 rain collector. Samples in the South Unit were collected at 6 springs, 2 streams, 8 wells, and 1 rain collector. Samples from springs, streams, and wells were collected in May, July, and September 2018. Samples from rain collectors were collected when enough daily precipitation accumulated in the collectors. Sampled precipitation events during the study period were in May, June, July, August, and September 2018. Physical properties of sampled water—temperature, pH, and specific conductance—were measured in the field. Water samples were analyzed for stable isotopes of oxygen and hydrogen and for chloride concentration. Recharge rates for aquifers supplying springs were determined using precipitation volume and chloride concentrations for a 12-day period before the sample-collection date. Multivariate statistical analysis methods used on water-chemistry data included principal component analysis, cluster analysis, and end-member mixing analysis. Water composition was used to determine the spring type and contributing aquifers for 11 springs in the North and South Units of Theodore Roosevelt National Park from analyses of water-chemistry data between May and September 2018. In the North Unit, Achenbach Spring was classified as a filtration spring with water from an unconfined part of the upper Fort Union aquifer and infiltration of precipitation. Hagen Spring, Mandal Spring, and Stevens Spring were classified as contact springs supplied by semiconfined parts of the upper Fort Union aquifer. Overlook Spring at one time may have been a natural spring or seep but now is a developed spring that behaves like a flowing artesian well completed in a confined part of the upper Fort Union aquifer. In the South Unit, six springs were classified into two spring types: filtration and contact springs. Boicourt Spring and Sheep Butte Spring were classified as filtration springs that have water supplied by unconfined parts of the upper Fort Union aquifer and infiltrated precipitation. Big Plateau Spring, Lone Tree Spring, Sheep Pasture Spring, and Southeast Corner Spring were classified as contact springs that receive waters from a semiconfined part of the upper Fort Union aquifer.

North Dakota↗

Initial comparison of pollen counting methods using precipitation and ambient air samples and automated artificial intelligence to support national monitoring objectives

Given the endemic nature of pollen throughout the environment, the impact upon human health, and the need for more extensive and better measurements of pollen in the USA, a preliminary project within the National Atmospheric Deposition Program’s (NADP) National Trends Network (NTN) was developed. Pollen was measured in ambient air by several methods and in precipitation wet deposition samples at three monitoring sites in the NTN. A method for counting pollen on filters was developed and provided pollen counts for NADP atmospheric wet-deposition samples and high-volume ambient air samplers (HVAS) for comparison with co-located traditional National Allergy Bureau microscopy samples and a commercially available pollen sensor (PS) counting method during the 2021 pollen season. The goals of this project were to test the potential of available air-monitoring infrastructures to obtain improved spatial measurements of aeroallergens, compare pollen counting results from the various methods, and to determine the suitability of using wet deposition samples for pollen collection. The onset and senescence of pollen seasons for general categories of genera compared favorably for each method at each site, indicating that pollen monitoring using wet-deposition and ambient air sampling filters could provide useful information to inform scientific studies, but not likely for public health objectives. Pollen counts were log transformed for Pearson product moment correlation. Tree pollen counts were correlated at all sites for daily PS data and traditional counting data ( R = 0.69–0.84), but statistical correlations between methods for grass and weed pollen were weak (0.40 < R < 0.60) or considered not correlated ( R < 0.40). Total pollen counts in NADP precipitation samples were correlated with traditional and PS counts at only one of three sites. Pollen counts for the weekly HVAS filter samples were correlated with PS counts for trees ( R = 0.62) and with NAB counts for trees ( R = 0.68) and weeds ( R = 0.72). Correlations in the data between methods suggest that, given further methods development, a variety of techniques could be integrated to expand and enhance existing pollen monitoring networks. Improved ambient air and atmospheric deposition sampling methods specifically targeted for pollen capture and analysis could support the collection of accurate and efficient meaningful aeroallergen data from existing atmospheric monitoring networks.

Aerobiologia↗