SEARCH · Geology Reports

Results for “Journal of Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

USGS2004

What makes hydromagmatic eruptions violent? Some insights from the Keanakāko'i Ash, Kı̄lauea Volcano, Hawai'i

Volcanic eruptions at the summit of Kilauea Volcano, Hawai'i, are of two dramatically contrasting types: (1) benign lava flows and lava fountains; and (2) violent, mostly prehistoric eruptions that dispersed tephra over hundreds of square kilometers. The violence of the latter eruptions has been attributed to mixing of water and magma within a wet summit caldera; however, magma injection into water at other volcanoes does not consistently produce widespread tephras. To identify other factors that may have contributed to the violence of these eruptions, we sampled tephra from the Keanakako'i Ash, the most recent large hydromagmatic deposit, and measured vesicularity, bubble-number density and dissolved volatile content of juvenile matrix glass to constrain magma ascent rate and degree of degassing at the time of quenching. Bubble-number densities (9X10 (super 4) -1X10 (super 7) cm (super -3) ) of tephra fragments exceed those of most historically erupted Kilauean tephras (3X10 (super 3) -1.8X10 (super 5) cm (super -3) ), and suggest exceptionally high magma effusion rates. Dissolved sulfur (average=330 ppm) and water (0.15-0.45 wt.%) concentrations exceed equilibrium-saturation values at 1 atm pressure (100-150 ppm and approximately 0.09%, respectively), suggesting that clasts quenched before equilibrating to atmospheric pressure. We interpret these results to suggest rapid magma injection into a wet crater, perhaps similar to continuous-uprush jets at Surtsey. Estimates of Reynolds number suggest that the erupting magma was turbulent and would have mixed with surrounding water in vortices ranging downward in size to centimeters. Such fine-scale mixing would have ensured rapid heat exchange and extensive magma fragmentation, maximizing the violence of these eruptions.

Hawaii↗

USGS2012

Structural analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes along the Trans-Alaska Crustal Transect, northern Chugach Mountains, Alaska

Structural and tectonic analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes, along the Trans-Alaska Crustal Transect in the northern Chugach Mountains documents a long succession of Early Jurassic through Cenozoic deformational events. The deformational events are generally characterized by distinctive structural fabrics and metamorphisms. Most of the events are interpreted to be related to subduction-related accretion or terrane accretion along the Border Ranges fault system (BRFS) and companion faults, and the Contact fault system (CFS). Each period of subduction-related accretion consisted of underplating of the outboard unit beneath the adjacent inboard unit. The fabric associated with each subduction-related accretion consisted of folding, intense shearing, and local rolling of planar structures. Age and structural relationships suggest migration of the zone of subduction-related accretion from the BRFS to the north, through each accreting unit, to younger bounding thrust faults to the south. Other older and younger deformational events are also recognized and are interpreted to have formed before and after, respectively, accretions along the BRFS and CFS. The main younger deformational events are (1) early Tertiary north verging folding of portions of the northern Chugach and southern Wrangellia terranes and (2) broad folding and rotation of major and minor structures related to subduction-related accretion or terrane accretion during early and middle Tertiary oroclinal bending of Alaska.

Journal of Geophysical Research Solid Earth↗

USGS1980

About forty last-glacial Lake Missoula jokulhlaups through southern Washington

The rhythmic Touchet Beds in the Walla Walla and lower Yakima valleys resulted from many separate backfloodings by hydraulically ponded glacial Lake Missoula water. At least once this episodic lake briefly contained half the of water that catastrophically drained the largest glacial Lakes Missoula. Evidence that the Touchet Beds rhythmites originated from brief backfloodings includes up-valley thinning and fining of locally derived bedload, upvalley paleocurrents, and upvalley transport of erratics derived from Cordilleran ice. Evidence that a lengthy nonflood environment followed the emplacement of each of about 40 Touchet Beds rhythmite includes inferred eolian and slopewash sediment overlying many rhythmites, uncontaminated Mount St. Helens "set S" tephra couplet atop one rhythmite as much as 220 m below the maximum level of backflooding, filled semiconsolidated rodent burrows throughout the 30 m of the thickest section, and dispersed skeletons of mammals. The lack of weathering or soil within the Touchet Beds suggests that all rhythmites are late Wisconsin. Bottom sediment of glacial Lake Missoula in Montana consists of rhythmites each interpreted as the record of a gradually deepening lake. Forty superposed rhythmites record about 40 late-Wisconsin fillings and emptyings of glacial Lake Missoula. The complementary records of about 40 separate glacial Lakes Missoula and about 40 great floods in southern Washington and in the Willamette Valley, Oregon indicate that the Missoula floods were great jokulhlaups. The last several floods were smaller than earlier ones because the controlling dam of Cordilleran ice thinned during deglaciation.

Journal of Geology↗

USGS2013

The utility of atmospheric analyses for the mitigation of artifacts in InSAR

The numerical weather models (NWMs) developed by the meteorological community are able to provide accurate analyses of the current state of the atmosphere in addition to the predictions of the future state. To date, most attempts to apply the NWMs to estimate the refractivity of the atmosphere at the time of satellite synthetic aperture radar (SAR) data acquisitions have relied on predictive models. We test the hypothesis that performing a final assimilative routine, ingesting all available meteorological observations for the times of SAR acquisitions, and generating customized analyses of the atmosphere at those times will better mitigate atmospheric artifacts in differential interferograms. We find that, for our study area around Mount St. Helens (Amboy, Washington, USA), this approach is unable to model the refractive changes and provides no mean benefit for interferogram analysis. The performance is improved slightly by ingesting atmospheric delay estimates derived from the limited local GPS network; however, the addition of water vapor products from the GOES satellites reduces the quality of the corrections. We interpret our results to indicate that, even with this advanced approach, NWMs are not a reliable mitigation technique for regions such as Mount St. Helens with highly variable moisture fields and complex topography and atmospheric dynamics. It is possible, however, that the addition of more spatially dense meteorological data to constrain the analyses might significantly improve the performance of weather modeling of atmospheric artifacts in satellite radar interferograms.

Journal of Geophysical Research B: Solid Earth↗

USGS2001

The geology and palynology of lower and Middle Pennsylvanian strata in the Western Kentucky Coal Field

The Western Kentucky Coal Field is the southern tip of the Eastern Interior, or Illinois Basin. Pennsylvanian rocks in this area, which include conglomerate, sandstone, shale, limestone and coal, were deposited primarily in coastal-deltaic settings at a time when western Kentucky was located close to the equator. This paper discusses temporal changes in regional sedimentation patterns and coal-forming floras of Lower and Middle Pennsylvanian strata in the Western Kentucky Coal Field. Lower Pennsylvanian strata of the Caseyville Formation are characterized by paleovalley-filling sedimentation patterns and extabasinal quartz pebbles. Caseyville Formation coals are characterized thin and discontinuous and were strongly influenced by subsidence within underlying paleovalleys, and the dissected lower Pennsylvanian paleotopography. Caseyville coals are commonly dominated by Lycospora, but can also have variable palynofloras, which probably reflects variable edaphic conditions and edge effects within small, patchy paleomires. Tradewater Formation strata show increased marine influences and tidal-estuarine sedimentation, especially in the middle and upper parts. Coal beds in the lower part of the Tradewater typically are thin and discontinuous, although some economically important beds are present. Coals become thicker, more abundant and more laterally persistent towards the top of the formation. Palynologically, lower and middle Tradewater Formation coals are dominated by Lycospora, but begin to show increased amounts of tree fern spores. Middle and upper Tradewater coals are thicker and more continuous, and contain high percentages of tree fern spores. In addition, cordaite pollen is locally abundant in this interval. Carbondale and Shelburn (Desmoinesian) strata are much more laterally continuous, and occur within classic cyclothems that can be traced across the coal field. Cyclothems have long been interpreted as being eustatically driven, and glacio-eustacy controlled not only sedimentation but also the formation of Desmoinesian paleomires. Palynologically, Carbondale and Shelburn coals are either dominated by Lycospora or have heterogeneous palynofloras. Palynologic and coal-quality data suggest that hydrologic base level may have been the primary control on Desmoinesian paleomires, rather than paleoclimate, as the coals display rheotrophic, rather than ombrotrophic characteristics. ?? 2001 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗

USGS1997

Correlated errors in geodetic time series: Implications for time-dependent deformation

Analysis of frequent trilateration observations from the two-color electronic distance measuring networks in California demonstrate that the noise power spectra are dominated by white noise at higher frequencies and power law behavior at lower frequencies. In contrast, Earth scientists typically have assumed that only white noise is present in a geodetic time series, since a combination of infrequent measurements and low precision usually preclude identifying the time-correlated signature in such data. After removing a linear trend from the two-color data, it becomes evident that there are primarily two recognizable types of time-correlated noise present in the residuals. The first type is a seasonal variation in displacement which is probably a result of measuring to shallow surface monuments installed in clayey soil which responds to seasonally occurring rainfall; this noise is significant only for a small fraction of the sites analyzed. The second type of correlated noise becomes evident only after spectral analysis of line length changes and shows a functional relation at long periods between power and frequency of 1/ƒ α , where ƒ is frequency and α≈2. With α=2, this type of correlated noise is termed random-walk noise, and its source is mainly thought to be small random motions of geodetic monuments with respect to the Earth's crust, though other sources are possible. Because the line length changes in the two-color networks are measured at irregular intervals, power spectral techniques cannot reliably estimate the level of 1/ƒ α noise. Rather, we also use here a maximum likelihood estimation technique which assumes that there are only two sources of noise in the residual time series (white noise and random-walk noise) and estimates the amount of each. From this analysis we find that the random-walk noise level averages about 1.3 mm/√yr and that our estimates of the white noise component confirm theoretical limitations of the measurement technique. In addition, the seasonal noise can be as large as 3 mm in amplitude but typically is less than 0.5 mm. Because of the presence of random-walk noise in these time series, modeling and interpretation of the geodetic data must account for this source of error. By way of example we show that estimating the time-varying strain tensor (a form of spatial averaging) from geodetic data having both random-walk and white noise error components results in seemingly significant variations in the rate of strain accumulation; spatial averaging does reduce the size of both noise components but not their relative influence on the resulting strain accumulation model.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Uplift of the Transantarctic Mountains and the bedrock beneath the East Antarctic ice sheet

In recent years the Transantarctic Mountains (TAM), the largest noncontractional mountain belt in the world, have become the focus of modelers who explained their uplift by a variety of isostatic and thermal mechanisms. A problem with these models is a lack of available data to compare with model predictions. We report here the results of a 312-km-long geophysical traverse conducted in 1993/1994 in the hinterland of the TAM. Using detailed subglacial topography and gravity measurements, we confirm the origin of the TAM as a flexural uplift of the edge of East Antarctica. Using an elastic model with a free edge, we can jointly fit the topography and the gravity with a plate having an elastic thickness of 85±15 km and a preuplift elevation of 700±50 m for East Antarctica. Using a variety of evidence, we argue that the uplift is coincident with a relatively minor tectonic event of transtensional motion between East and West Antarctica during the Eocene rather than the Late Cretaceous rifting event that created the Ross Embayment. We suggest that this transtensional motion caused the continuous plate to break, which created an escarpment that significantly increased the rates of erosion and exhumation. Results from the geophysical traverse also extend our knowledge of the bedrock geology from the exposures within the TAM to the ice covered interior. Our interpretation suggests that the Ferrar flood basalts extend at least 100 km westward under the ice. The Beacon Supergroup of Paleozoic and Mesozoic sediments thins gradually under the ice and its reconstructed thickness is reminiscent of profiles of foreland basins. Finally, there is no indication in the gravity field for an incomplete rebound due to significant melting of the East Antarctic ice sheet since the last glacial period.

Journal of Geophysical Research B: Solid Earth↗

USGS1989

Significance of loessite in the Maroon Formation (Middle Pennsylvanian to Lower Permian), Eagle Basin, northwest Colorado

Quaternary loess deposits are widespread on the earth's surface, yet pre-Quaternary loess deposits have rarely been reported. The Maroon Formation (Middle Pennsylvanian to Lower Permian) of the Eagle Basin, northwest Colorado, includes a siltstone-dominated facies interpreted as loessite (lithified loess) along its downwind basin margin. The section of inferred loessite in the Maroon Formation is locally at least 490 m thick and consists in large part of structureless and nearly structureless beds of homogeneous sandy siltstone. Bed contacts are generally planar to undulatory and are either horizontal or are characterized by gentle relief. Loessite beds are separated by common claystone drapes and weakly developed paleosols, and by rare pond deposits, channel deposits, and eolian-ripple-laminated deposits. The loess interpretation is based on 1) the homogeneity and dominance of the sandy silt grain-size; 2) the relative lack of primary sedimentary structures; 3) the gentle character of most bedding contacts and the common mantling of irregular depositional topography; 4) the inferred paleogeographic setting; and 5) the absence of suitable alternative interpretations. The loessite grades laterally into mixed fluvial-eolian deposits of the Maroon Formation in the main part of Eagle Basin, which served as the loessite sediment source. Deposition of the Maroon Formation was probably strongly affected by cyclic climatic changes synchronous with fluctuations in late Paleozoic continental ice sheets. The paleogeography and paleoclimatology of the Maroon Formation depositional system are not unique, suggesting that there are probably many other ancient loessites that have gone unrecognized.

Journal of Sedimentary Petrology↗

USGS1963

Disease and infection in the Tetraonidae

Disease is one of many factors advanced to explain the fluctuations of grouse populations, but no profound study of natural disease losses in Tetraonidae exists. The literature contains frequent references to THE grouse disease, although many potential pathogens are listed in numerous surveys and limited investigations, and the relevant data indicate that no single etiologic agent is universally responsible for disease in grouse. Few experimental infections or related studies on parasite biology have been attempted. Well-trained personnel and specialized facilities are required for research and analysis (1) to develop new methods of interpretation to be used with existing census techniques, (2) to conduct intensive studies of ecological factors of host and habitat, and (3) to establish base lines for recognition of deviations from the norm. Disease in wildlife can be controlled only through management procedures based on information concerning the biology of pathogens, hosts, and environments. It cannot be studied as a separate entity if its impact on survival or population fluctuations of grouse is to be correctly assessed.

Journal of Wildlife Management↗

USGS2022

Magnetotelluric investigations of the Kīlauea Volcano, Hawaii

In 2002 and 2003 a collaborative effort was undertaken between Lawrence Berkeley National Laboratory, Sandia National Laboratories, the U.S. Geological Survey (USGS) Menlo Park, the USGS Hawaiian Volcano Observatory, and Electromagnetic Instruments Inc. to study the Kīlauea volcano in Hawaii using the magnetotelluric (MT) technique. The work was motivated by a desire to improve understanding of the magma reservoirs and conduits within Kīlauea and the East and Southwest Rift zones, which has implications for understanding Kīlauea's plumbing system. An improved understanding of the rift zones has implications in understanding large-scale landslides that are generated in the Hilina Slump, which produce significant impacts on coastal communities. Up to eight stations operated simultaneously, with multiple remote reference sites, and data were processed using multi-station robust processing techniques. In total, data were acquired at 70 sites over the Southwest and East rift zones. Good to excellent quality data were obtained even in the harshest conditions, such as those encountered on the fresh lava flows of the East Rift Zone, where electrical contact resistances are on the order of 100 kΩ. A three-dimensional (3D) MT model study was done to guide interpretation of the observed MT measurements. Synthetic modeling demonstrates that conductive bodies in the upper 3 km can be spatially resolved where MT station sampling is good. Resistivity anomalies in the 3D inversions have a high degree of spatial correlation with previously published seismic velocity anomalies beneath Kīlauea. Melt fractions between 0.096 and 0.117 are calculated for the Kīlauea and Puʻuʻōʻō low resistivity anomalies, respectively.

Hawai'i↗

USGS2012

Magnetic grain-size variations through an ash flow sheet: influence on magnetic properties and implications for cooling history

Rock magnetic studies of tuffs are essential to the interpretation of paleomagnetic data derived from such rocks, provide a basis for interpretation of aeromagnetic data over volcanic terranes, and yield insights into the depositional and cooling histories of ash flow sheets. A rhyolitic ash flow sheet, the Miocene-aged Tiva Canyon Member of the Paintbrush Tuff, contains both titanomagnetite phenocrysts, present in the magma prior to eruption, and cubic Fe-oxide microcrystals that grew after emplacement. Systematic variations in the quantity and magnetic grain size of the microcrystals produce large variations in magnetic properties through a section of the ash flow sheet penetrated in a borehole on the Nevada Test Site. Natural remanent magnetization varies from less than 1 × 10 −4 to more than 8 × 10 −4 A m 3 kg −1 , and in-phase magnetic susceptibility varies from less than 1 × 10 −6 to more than 10 × 10 −6 m 3 kg −1 . The microcrystals, which include both magnetite and maghemite, have Curie points and maximum unblocking temperatures between 580°C and 640°C. Rock magnetic data, including in-phase and quadrature magnetic susceptibilities as well as hysteresis parameters, demonstrate that these microcrystals are of superparamagnetic and single-domain sizes. Titanomagnetite phenocrysts are the dominant remanence carriers in the central 50 m of the section, whereas microcrystals are important contributors to remanent magnetization and magnetic susceptibility in two 15-m-thick zones at the top and bottom. Within these zones the size of microcrystals decreases both toward the quenched margins and toward the interior of the sheet. The decrease in microcrystal size toward the interior of the sheet is interpreted to indicate the presence of a cooling break; possibly represented by a concentration of pumice. Laboratory heating produces changes in magnetic properties which vary complexly from sample to sample. Such changes include (1) decrease in saturation magnetization, (2) both increase and decrease in in-phase and quadrature magnetic susceptibilities, and (3) shifts in coercivity spectra. The complex sample-to-sample variation in response to heating is attributed to differences in initial grain-size distributions.

Journal of Geophysical Research↗

USGS1997

Deep seismic structure and tectonics of northern Alaska: Crustal-scale duplexing with deformation extending into the upper mantle

Seismic reflection and refraction and laboratory velocity data collected along a transect of northern Alaska (including the east edge of the Koyukuk basin, the Brooks Range, and the North Slope) yield a composite picture of the crustal and upper mantle structure of this Mesozoic and Cenozoic compressional orogen. The following observations are made: (1) Northern Alaska is underlain by nested tectonic wedges, most with northward vergence (i.e., with their tips pointed north). (2) High reflectivity throughout the crust above a basal decollement, which deepens southward from about 10 km depth beneath the northern front of the Brooks Range to about 30 km depth beneath the southern Brooks Range, is interpreted as structural complexity due to the presence of these tectonic wedges, or duplexes. (3) Low reflectivity throughout the crust below the decollement is interpreted as minimal deformation, which appears to involve chiefly bending of a relatively rigid plate consisting of the parautochthonous North Slope crust and a 10- to 15-km-thick section of mantle material. (4) This plate is interpreted as a southward verging tectonic wedge, with its tip in the lower crust or at the Moho beneath the southern Brooks Range. In this interpretation the middle and upper crust, or all of the crust, is detached in the southern Brooks Range by the tectonic wedge, or indentor: as a result, crust is uplifted and deformed above the wedge, and mantle is depressed and underthrust beneath this wedge. (5) Underthrusting has juxtaposed mantle of two different origins (and seismic velocities), giving rise to a prominent sub-Moho reflector.

Journal of Geophysical Research B: Solid Earth↗

USGS1991

Geochemistry of lavas from Taal volcano, southwestern Luzon, Philippines: evidence for multiple magma supply systems and mantle source heterogeneity

Taal Volcano is a highly active center in the southwest Luzon volcanic field. Recent eruptions are confined to Volcano Island, a plexus of cinder cones and tuff rings surrounding a central crater, occupying (and post-dating) a massive volcano-tectonic depression resulting from multiple phases of collapse. Taal lava series can be distinguished from each other by differences in major and trace element trends and trace element ratios, indicating multiple magmatic systems associated with discrete centers in time and space. On Volcano Island, contemporaneous lava series range from typically calc-alkaline to iron-enriched. Major and trace element variation in these series can be modelled by fractionation of similar assemblages, with early fractionation of titano-magnetite in less iron-enriched series. However, phase compositional and petrographic evidence of mineral-liquid disequilibrium suggests that magma mixing played an important role in the evolution of these series. We interpret this to mean that mixing occurred along a line of descent defined by fractional crystallization, with mixing occurring over larger compositional intervals in the less iron-enriched series, consistent with numerical modelling. Between-series incompatible element ratio differences are not explicable through differential partial melting of a homogeneous source (also confirmed by variation in Pb isotopic ratios), suggesting a supply system from discrete melt zones in heterogeneous mantle.

Journal of Petrology↗

USGS2011

Estimating Hydraulic Parameters When Poroelastic Effects Are Significant

For almost 80 years, deformation-induced head changes caused by poroelastic effects have been observed during pumping tests in multilayered aquifer-aquitard systems. As water in the aquifer is released from compressive storage during pumping, the aquifer is deformed both in the horizontal and vertical directions. This deformation in the pumped aquifer causes deformation in the adjacent layers, resulting in changes in pore pressure that may produce drawdown curves that differ significantly from those predicted by traditional groundwater theory. Although these deformation-induced head changes have been analyzed in several studies by poroelasticity theory, there are at present no practical guidelines for the interpretation of pumping test data influenced by these effects. To investigate the impact that poroelastic effects during pumping tests have on the estimation of hydraulic parameters, we generate synthetic data for three different aquifer-aquitard settings using a poroelasticity model, and then analyze the synthetic data using type curves and parameter estimation techniques, both of which are based on traditional groundwater theory and do not account for poroelastic effects. Results show that even when poroelastic effects result in significant deformation-induced head changes, it is possible to obtain reasonable estimates of hydraulic parameters using methods based on traditional groundwater theory, as long as pumping is sufficiently long so that deformation-induced effects have largely dissipated. ?? 2011 The Author(s). Journal compilation ?? 2011 National Ground Water Association.

Ground Water↗

USGS2017

Quantifying the effects of wildfire on changes in soil properties by surface burning of soils from the Boulder Creek Critical Zone Observatory

Study region This study used intact soil cores collected at the Boulder Creek Critical Zone Observatory near Boulder, Colorado, USA to explore fire impacts on soil properties. Study focus Three soil scenarios were considered: unburned control soils, and low- and high-temperature burned soils. We explored simulated fire impacts on field-saturated hydraulic conductivity, dry bulk density, total organic carbon, and infiltration processes during rainfall simulations. New hydrological insights for the region Soils burned to high temperatures became more homogeneous with depth with respect to total organic carbon and bulk density, suggesting reductions in near-surface porosity. Organic matter decreased significantly with increasing soil temperature. Tension infiltration experiments suggested a decrease in infiltration rates from unburned to low-temperature burned soils, and an increase in infiltration rates in high-temperature burned soils. Non-parametric statistical tests showed that field-saturated hydraulic conductivity similarly decreased from unburned to low-temperature burned soils, and then increased with high-temperature burned soils. We interpret these changes result from the combustion of surface and near-surface organic materials, enabling water to infiltrate directly into soil instead of being stored in the litter and duff layer at the surface. Together, these results indicate that fire-induced changes in soil properties from low temperatures were not as drastic as high temperatures, but that reductions in surface soil water repellency in high temperatures may increase infiltration relative to low temperatures.

Colorado↗

USGS2024

Indications of preferential groundwater seepage feeding northern peatland pools

Groundwater seepage from underlying permeable glacial sedimentary structures, such as eskers, has been hypothesized to directly feed pools in northern peat bogs. These hypotheses directly contradict classical peat bog models for ombrogenous systems, wherein meteoric water is the sole water input to these systems. Variations in the underlying mineral sediment in contact with the peat imply that unrecognized hydrogeologic connectivity may exist with pools in northern peat bogs, particularly where high permeability materials are in contact with the peat. Seepage dynamics originating from these structural variations were investigated using a suite of thermal and hydrogeophysical methods deployed around pools in a peat bog of northeastern Maine, USA. Thermal characterization methods mapped anomalies that were confirmed as matrix seepage or preferential flow pathways (PFPs). Geochemical methods were employed at identified thermal anomalies to confirm upwelling of solute-rich groundwater. Conduits around pools were associated with surficial terminations of suspected peat pipes, based on the inference of pathways extending down into the peat, that focus flow through PFPs in the peat matrix. Discharge also occurred through the peat matrix adjacent to suspected pipe structures and matrix seepage rates were quantified using analysis of diurnal temperature signals recorded at multiple depths. Seepage rates, with a maximum of nearly 0.4 m/d, were measured at localized points around pools. Periods of synchronized temperatures paired with highly muted diurnal temperature signals, recorded in diurnal temperature with depth data, were interpreted qualitatively as activation of strong upward discharge rates through suspected peat pipes. These time periods correlated strongly with local precipitation events around the peatland. Ground-penetrating radar surveys revealed discontinuities in the low permeability glacio-marine clay at the mineral sediment-peat interface, interpreted to be regional glacial esker deposits, which were located beneath and around pools. Heat tracing, specific conductance contrasts, seepage rates, and trace metal concentrations all imply groundwater seepage originating from underlying permeable glacial esker deposits and directly sourcing pools. Preferential groundwater inputs into northern peat bogs may play a key role in developing and maintaining pool systems, with enhanced solute transport impacting peatland ecology, water resources, and carbon cycling.

Maine↗

USGS2006

V P and V S structure of the Yellowstone hot spot from teleseismic tomography: Evidence for an upper mantle plume

The movement of the lithosphere over a stationary mantle magmatic source, often thought to be a mantle plume, explains key features of the 16 Ma Yellowstone–Snake River Plain volcanic system. However, the seismic signature of a Yellowstone plume has remained elusive because of the lack of adequate data. We employ new teleseismic P and S wave traveltime data to develop tomographic images of the Yellowstone hot spot upper mantle. The teleseismic data were recorded with two temporary seismograph arrays deployed in a 500 km by 600 km area centered on Yellowstone. Additional data from nearby regional seismic networks were incorporated into the data set. The V P and V S models reveal a strong low-velocity anomaly from ∼50 to 200 km directly beneath the Yellowstone caldera and eastern Snake River Plain, as has been imaged in previous studies. Peak anomalies are −2.3% for V P and −5.5% for V S . A weaker, anomaly with a velocity perturbation of up to −1.0% V P and −2.5% V S continues to at least 400 km depth. This anomaly dips 30° from vertical, west-northwest to a location beneath the northern Rocky Mountains. We interpret the low-velocity body as a plume of upwelling hot, and possibly wet rock, from the mantle transition zone that promotes small-scale convection in the upper ∼200 km of the mantle and long-lived volcanism. A high-velocity anomaly, 1.2% V P and 1.9% V S , is located at ∼100 to 250 km depth southeast of Yellowstone and may represent a downwelling of colder, denser mantle material.

Idaho, Montana, Nevada, Oregon, Utah, Wyoming↗

USGS2012

Minor and trace element geochemistry of volcanic rocks dredged from the Galapagos spreading center: Role of crystal fractionation and mantle heterogeneity

A wide range of rock types (abyssal tholeiite, Fe-Ti-rich basalt, andesite, and rhyodacite) were dredged from near 95°W and 85°W on the Galapagos spreading center. Computer modeling of major element compositions has shown that these rocks could be derived from common parental magmas by successive degrees of fractional crystallization. However, the P 2 O 5 /K 2 O ratio averages 0.83 at 95°W and 1.66 at 85°W and implies distinct mantle source compositions for the two areas. These source regions also have different rare earth element (REE) abundance patterns, with [La/Sm] EF = 0.67 at 95°W and 0.46 at 85°W. The sequence of fractionated lavas differs for the two areas and indicates earlier fractionation of apatite and titanomagnetite in the lavas from 95°W. The mantle source regions for these two areas are interpreted to be depleted in incompatible (and volatile?) elements, although the source region beneath 95°W is less severely depleted in La and K. Incompatible trace element abundances in 26 samples are used to infer that the range of Fe-Ti-rich basalt from 85°W represents 19 to 35% residual liquid following crystal fractionation of a mineral assemblage of plagioclase, clinopyroxene, and lesser olivine. The most highly differentiated samples have also had less than 1% titanomagnetite removed. Most samples from 85°W can be related to a common parental magma that contained approximately 9 wt % FeO*, 1 wt % TiO 2 , and had an Mg number (Mg# = 100 Mg/(Mg + Fe 2+ )) of about 65. Although the samples from 95°W cannot all be derived from a common parental magma, the inferred parental magmas may have been derived by varying degrees of partial melting of a common source. The fractionation sequence consists of two parts: an initial iron enrichment trend followed by a silica enrichment trend. We interpret the trace element data to indicate that the most iron rich lavas represent about 32% residual liquid derived by crystal fractionation of plagioclase, clinopyroxene, and lesser olivine from a parental magma with an Mg number of about 66. The silica enrichment trend results from crystallization of titanomagnetite and some apatite. Fractionation of pigeonite, which is a minor phase in the major element models, cannot be distinguished from clinopyroxene fractionation by using trace elements.

Journal of Geophysical Research Solid Earth↗