Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
USGS1989

Depositional environments and tectonic controls on the coal-bearing Lower to Middle Jurassic Yan'an Formation, southern Ordos Basin, China

The Ordos Basin of north-central China is well known for vast energy resources. This nonmarine interior basin developed on the North China-Korean platform following the Late Triassic Indochina orogeny and, for a time, contained a large freshwater lake prior to being uplifted into its present form at the close of the Mesozoic. Lower to Middle Jurassic coal occurs in the fluviolacustrine Yan'an Formation along the southern margin of the basin in the Huanglong coalfield. In the northeast part of the field, the formation ranges from 0 to 180 m in thickness and is divided into five fining-upward members, each representing a regressive-transgressive lacustrine cycle. Low-sulfur, high-volatile bituminous coal is complexly distributed in the lowest member of the Yan'an Formation. Deposition of this member was influenced by two tectonic events that controlled coal occurrence. First, regional uplifts were produced by the Late Triassic Indochina orogeny and left as highlands on the pre-Yan'an, Triassic land surface; in the lowest member, coal beds thin toward and pinch out against these highlands. Second, syndepositional tectonism of the Jurassic through Cretaceous Yanshan orogeny created a series of northeast-trending folds that were topographically expressed as evolving highs and lows. Swamps and resulting peat accumulation preferentially occupied the subsiding paleodepressions. Because of the tectonic influence on peat accumulation, coal beds thin and merge toward anticlines and thicken and split toward synclines. In addition, coal quality is documented to be less variable along a northeast trend than along a northwest trend.

Geology↗
USGS1991

Fault orientations in extensional and conjugate strike-slip environments and their implications

Seismically active conjugate strike-slip faults in California and Japan typically have mutually orthogonal right- and left-lateral fault planes. Normal- fault dips at earthquake nucleation depths are concentrated between 40° and 50°. The observed orientations and their strong clustering are surprising, because conventional faulting theory suggests fault initiation with conjugate 60° and 120° intersecting planes and 60° normal-fault dip or fault reactivation with a broad range of permitted orientations. The observations place new constraints on the mechanics of fault initiation, rotation, and evolutionary development. We speculate that the data could be explained by fault rotation into the observed orientations and deactivation for greater rotation or by formation of localized shear zones beneath the brittle-ductile transition in Earth's crust. Initiation as weak frictional faults seems unlikely.

Geology↗
USGS2007

Seismic hazard and risk assessment in the intraplate environment: The New Madrid seismic zone of the central United States

Although the causes of large intraplate earthquakes are still not fully understood, they pose certain hazard and risk to societies. Estimating hazard and risk in these regions is difficult because of lack of earthquake records. The New Madrid seismic zone is one such region where large and rare intraplate earthquakes (M = 7.0 or greater) pose significant hazard and risk. Many different definitions of hazard and risk have been used, and the resulting estimates differ dramatically. In this paper, seismic hazard is defined as the natural phenomenon generated by earthquakes, such as ground motion, and is quantified by two parameters: a level of hazard and its occurrence frequency or mean recurrence interval; seismic risk is defined as the probability of occurrence of a specific level of seismic hazard over a certain time and is quantified by three parameters: probability, a level of hazard, and exposure time. Probabilistic seismic hazard analysis (PSHA), a commonly used method for estimating seismic hazard and risk, derives a relationship between a ground motion parameter and its return period (hazard curve). The return period is not an independent temporal parameter but a mathematical extrapolation of the recurrence interval of earthquakes and the uncertainty of ground motion. Therefore, it is difficult to understand and use PSHA. A new method is proposed and applied here for estimating seismic hazard in the New Madrid seismic zone. This method provides hazard estimates that are consistent with the state of our knowledge and can be easily applied to other intraplate regions. ?? 2007 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2019

Pleistocene lakes and paleohydrologic environments of the Tecopa basin, California: Constraints on the drainage integration of the Amargosa River

The Tecopa basin in eastern California was a terminal basin that episodically held lakes during most of the Quaternary until the basin and its modern stream, the Amargosa River, became tributary to Death Valley. Although long studied for its sedimentology, diagenesis, and paleomagnetism, the basin’s lacustrine and paleoclimate history has not been well understood, and conflicting interpretations exist concerning the relations of Tecopa basin to the Amargosa River and to pluvial Lake Manly in Death Valley. Previous studies also did not recognize basinwide tectonic effects on lake-level history. In this study, we focused on: (1) establishing a chronology of shoreline deposits, as the primary indicator of lake-level history, utilizing well-known ash beds and new uranium-series and luminescence dating; (2) using ostracodes as indicators of water chemistry and water source(s); and (3) correlating lake transgressions to well-preserved fluvial-deltaic sequences. During the early Pleistocene, the Tecopa basin hosted small shallow lakes primarily fed by low-alkalinity water sourced mainly from runoff and (or) a groundwater source chemically unlike the modern springs. The first lake that filled the basin occurred just prior and up to the eruption of the 765 ka Bishop ash during marine isotope stage (MIS) 19; this lake heralded the arrival of the Amargosa River, delivering high-alkalinity water. Two subsequent lake cycles, coeval with MIS 16 (leading up to eruption of 631 ka Lava Creek B ash) and MIS 14 and (or) MIS 12, are marked by prominent accumulations of nearshore and beach deposits. The timing of the youngest of these three lakes, the High lake, is constrained by a uranium-series age of ca. 580 ± 120 ka on tufa-cemented beach gravel and by estimates from sedimentation rates. Highstand deposits of the Lava Creek and High lakes at the north end of the basin are stratigraphically tied to distinct sequences of fluvial-deltaic deposits fed by alkaline waters of the Amargosa River. The High lake reached the highest level achieved in the Tecopa basin, and it may have briefly discharged southward but did not significantly erode its threshold. The High lake was followed by a long hiatus of as much as 300 k.y., during which there is evidence for alluvial, eolian, and groundwater-discharge deposition, but no lakes. We attribute this hiatus, as have others, to blockage of the Amargosa River by an alluvial fan upstream near Eagle Mountain. A final lake, the Terminal lake, formed when the river once again flowed south into Tecopa basin, but it was likely short-lived due to rapid incision of the former threshold south of Tecopa. Deposits of the Terminal lake are inset below, and are locally unconformable on, deposits of the High lake and the nonlacustrine deposits of the hiatus. The Terminal lake reached its highstand at ca. 185 ± 21 ka, as dated by infrared-stimulated luminescence on feldspar in beach sand, a time coincident with perennial lake mud and alkaline-tolerant ostracodes in the Badwater core of Lake Manly during MIS 6. A period of stillstand occurred as the Terminal lake drained when the incising river encountered resistant Stirling Quartzite near the head of present-day Amargosa Canyon. Our studies significantly revise the lacustrine and drainage history of the Tecopa basin, show that the MIS 6 highstand was not the largest lake in the basin as previously published (with implications for potential nuclear waste storage at Yucca Mountain, Nevada), and provide evidence from shoreline elevations for ∼20 m of tectonic uplift in the northern part of the basin across an ENE-trending monoclinal flexure.

California↗
USGS2019

Recognition and significance of Late Devonian fluvial, estuarine, and mixed siliciclastic-carbonate nearshore marine environments in the San Juan Mountains (southwestern Colorado, U.S.A.): Multiple incised valleys backfilled by lowstand and transgressive system tracts

The Upper Devonian Ignacio Formation (as stratigraphically revised) comprises a transgressive, tide-dominated estuarine depositional system in the San Juan Mountains (Colorado, USA). The unit backfills at least three bedrock paleovalleys (10–30 km wide and ≥42 m deep) with a consistent stratigraphy of tidally influenced fluvial, bayhead-delta, central estuarine-basin, mixed tidal-flat, and estuarine-mouth tidal sandbar deposits. Paleovalleys were oriented northwest while longshore transport was to the north. The deposits represent Upper Devonian lowstand and transgressive systems tracts. The overlying Upper Devonian Elbert Formation (upper member) consists of geographically extensive tidal-flat deposits and is interpreted as mixed siliciclastic-carbonate bay-fill facies that represents an early highstand systems tract. Stratigraphic revision of the Ignacio Formation includes reassigning the basal conglomerate to the East Lime Creek Conglomerate, recognizing an unconformity separating these two units, and incorporating strata previously mapped as the McCracken Sandstone Member (Elbert Formation) into the Ignacio Formation. The Ignacio Formation was previously interpreted as Cambrian, but evidence that it is Devonian includes reexamined fossil data and detrital zircon U-Pb geochronology. The Ignacio Formation has a stratigraphic trend of detrital zircon ages shifting from a single ca. 1.7 Ga age peak to bimodal ca. 1.4 Ga and ca. 1.7 Ga age peaks, which represents local source-area unroofing history. Specifically, the upper plate of a Proterozoic thrust system (ca. 1.7 Ga Twilight Gneiss) was eroded prior to exposure of the lower plate (ca. 1.4 Ga Uncompahgre Formation). These results are a significant alternative interpretation of the geologic history of the southern Rocky Mountains.

Colorado↗
USGS1971

Chemical compositions of rock types as factors in our environment

The types of rocks that form geologic units in the Earth’s crust supply most of the raw materials from which soils are formed and from which water derives its inorganic constituents. The compositions of what we eat and drink thus depend in part upon the compositions of the source rocks. Igneous rocks are formed by crystallization and solidification of a rock melt. Metamorphic rocks are formed by recrystallization of both igneous and sedimentary rocks caused by heat and pressure within the Earth’s crust. Sedimentary rocks are formed chiefly by the deposition in water of weathering and erosion products of pre-existing igneous, metamorphic, or other sedimentary rocks. The compositions of metamorphic rocks are generally similar to the compositions of the rocks that were metamorphosed, and only igneous and sedimentary rock compositions are considered here. Igneous rocks range in SiO 2 content from about 40 to nearly 80 percent, and other constituents increase in amount as SiO 2 decreases. The changes in the other constituents are not large, however, except for the quantitatively unimportant least silicic rocks; these contain conspicuously more magnesium and less aluminum than the other kinds of igneous rocks. Sedimentary rocks range in SiO 2 content from nearly zero for the carbonate rocks to almost 100 percent for quartzite and pure sandstone. Shale and clay contain intermediate amounts of SiO 2 and as much as 25 percent AI 2 O 3 , more than any of the igneous rocks. Carbonate rocks are composed mostly of calcium and magnesium carbonates. The contents of individual trace elements vary widely with rock type. Chromium, titanium, nickel, and cobalt are conspicuously concentrated in low-silica igneous rocks that are quantitatively unimportant. Arsenic, iodine, molybdenum, and selenium are conspicuously concentrated in shale and clay. In addition, most other elements occur in largest amounts in shale and clay compared to other sedimentary rocks, and in amounts nearly equal to those in igneous rocks. Soils derived from different kinds of igneous rocks do not differ from each other as much as do soils derived from different kinds of sedimentary rocks. This is partly because igneous rocks generally are more resistant to weathering than sedimentary rocks that were deposited in water. Some of the important constituents of sedimentary rocks have been precipitated from solution, which makes them more susceptible to weathering and re-solution. Similarly, sedimentary rocks have a greater effect than igneous rocks on the composition of ground water. Determination of areal variations in composition should be more detailed than normal petrologic investigations if the results are to be usable for environmental studies. Statistical principles should be used in planning the sampling, analysis, and interpretation of results.

Book chapter↗
USGS1957

Chapter 22: Environments and facies of existing bays on the central Texas coast

The estuaries and neritic waters along the central Texas coast are characterized by broad ranges of environmental factors, providing conditions favorable to temperate organisms in winter and tropical organisms in summer. Dredging in the coastal waters revealed a number of distinct faunal facies, the distribution of which appears to be controlled primarily by salinity. Characteristic assemblages are found in the following areas: closed bays, polyhaline bays, a highly saline lagoon, passes, beaches on the open Gulf, and shallow waters of the open gulf. In the closed bays three subfacies are recognized-one in the bay heads, one on the reefs, and one in the interreef areas; in the open gulf the assemblages living close to shore are differentiated from those found 2-4 miles off shore. In most stations each facies is characterized by an abundance of certain living forms. Dead shells and other skeletal parts are much more widely distributed, but many such strays may be recognized as transported elements by their rarity or by their eroded surfaces. Each group of organisms has one or more centers of maximum development in numbers of species. The Foraminifera, for example, attain their greatest development in the polyhaline bays and near the heads of passes, the ostracodes near the bay heads, mollusks in the polyhaline bays and in the Gulf, and diatoms under normal marine conditions in the Gulf. The reef assemblage of the closed bays is poor in numbers of species, but the individuals are so numerous that they form extensive deposits.

Texas↗
USGS1993

Environment of deposition of CaCO3 in Elk Lake, Minnesota

Elk Lake is near the present forest-prairie border in northwestern Minnesota, and is also located on the boundary between hard-water lakes that are typical of once-glaciated parts of the north-central United States and more saline prairie lakes of western Minnesota and the Dakotas. The sediments of the prairie lakes just west of Elk Lake are unusual in that they commonly contain high-Mg calcite and dolomite in addition to low-Mg calcite, which is the dominant carbonate mineral in most marl lakes. During the mid-Holocene dry period, prairie conditions expanded eastward into the forested regions of Minnesota. Variations in types and abundances of carbonate minerals in the Holocene sediments of Elk Lake recorded this climatic change. Studies of primary productivity, carbonate saturation, water chemistry, and sediment-trap samples show that low-Mg calcite precipitates during the summer, triggered by algal photosynthesis. The epilimnion of Elk Lake is always oversaturated with calcite, and the degree of oversaturation increases progressively during the summer. The pH of the epilimnion increases from <8.0 after spring overturn to almost 9.0 in late summer in response to photosynthetic removal of CO 2 during the summer months. The rate of calcium depletion from the epilimnion is proportional to the increase in pH and the rate of photosynthetic carbon fixation. Today the only carbonate minerals that are accumulating in the sediments of Elk Lake are low-Mg calcite and manganese carbonate (rhodochrosite). Rhodochrosite, and probably manganese oxyhydroxide, precipitates when manganese-rich anoxic bottom waters come in contact with carbonate-rich oxic surface waters. During the arid mid-Holocene prairie period, however, low-Mg calcite, dolomite, aragonite, and rhodochrosite all accumulated in the sediments of Elk Lake. Dolomite formed in Elk Lake during this period in response to a higher Mg:Ca ratio in the water, just as it is forming today in lakes of the prairie regions of western Minnesota. The coincident occurrence of aragonite and biological indicators of high salinity suggests that the salinity of Elk Lake and the Mg:Ca ratio were higher than in any of the present prairie lakes of western Minnesota.

Minnesota↗
USGS2008

Cement manufacture and the environment - Part I: Chemistry and technology

Hydraulic (chiefly portland) cement is the binding agent in concrete and mortar and thus a key component of a country's construction sector. Concrete is arguably the most abundant of all manufactured solid materials. Portland cement is made primarily from finely ground clinker, which itself is composed dominantly of hydraulically active calcium silicate minerals formed through high-temperature burning of limestone and other materials in a kiln. This process requires approximately 1.7 tons of raw materials perton of clinker produced and yields about 1 ton of carbon dioxide (CO2) emissions, of which calcination of limestone and the combustion of fuels each contribute about half. The overall level of CO2 output makes the cement industry one of the top two manufacturing industry sources of greenhouse gases; however, in many countries, the cement industry's contribution is a small fraction of that from fossil fuel combustion by power plants and motor vehicles. The nature of clinker and the enormous heat requirements of its manufacture allow the cement industry to consume a wide variety of waste raw materials and fuels, thus providing the opportunity to apply key concepts of industrial ecology, most notably the closing of loops through the use of by-products of other industries (industrial symbiosis). In this article, the chemistry and technology of cement manufacture are summarized. In a forthcoming companion article (part II), some of the environmental challenges and opportunities facing the cement industry are described. Because of the size and scope of the U.S. cement industry, the analysis relies primarily on data and practices from the United States.

Journal of Industrial Ecology↗
USGS2012

Optimal egg size in a suboptimal environment: reproductive ecology of female Sonora mud turtles (Kinosternon sonoriense) in central Arizona, USA

We studied the reproductive ecology of female Sonora mud turtles (Kinosternon sonoriense) at Montezuma Well, a chemically-challenging natural wetland in central Arizona, USA. Females matured between 115.5 and 125 mm carapace length (CL) and 36-54% produced eggs each year. Eggs were detected in X-radiographs from 23 April-28 September (2007-2008) and the highest proportion (56%) of adult females with eggs occurred in June and July. Clutch frequency was rarely more than once per year. Clutch size was weakly correlated with body size, ranged from 1-8 (mean = 4.96) and did not differ significantly between years. X-ray egg width ranged from 17.8-21.7 mm (mean 19.4 mm) and varied more among clutches than within. Mean X-ray egg width of a clutch did not vary significantly with CL of females, although X-ray pelvic aperture width increased with CL. We observed no evidence of a morphological constraint on egg width. In addition, greater variation in clutch size, relative to egg width, suggests that egg size is optimized in this hydrologically stable but chemically-challenging habitat. We suggest that the diversity of architectures exhibited by the turtle pelvis, and their associated lack of correspondence to taxonomic or behavioral groupings, explains some of the variation observed in egg size of turtles.

Arizona↗
USGS2020

Visually communicating future climate in a web environment

While there is growing demand for use of climate model projections to understand the potential impacts of future climate on resources, there is a lack of effective visuals that convey the range of possible climates across spatial scales and with uncertainties that potential users need to inform their impact assessments and studies. We use usability testing including eye tracking to explore how a group of resource professionals (foresters) interpret and understand a series of graphical representations of future climate change, housed within a web-based decision support system (DSS), that address limitations identified in other tools. We find that a three-map layout effectively communicates the spread of future climate projections spatially, that location-specific information is effectively communicated if depicted both spatially on a map and temporally on a time series plot, and that model error metrics may be useful for communicating uncertainty and in demonstrating the utility of these future climate datasets.

Weather, Climate, and Society↗
USGS1981

Depositional environments of the Pennsylvanian Pottsville Formation in the Black Warrior basin of Alabama

The Pennsylvanian Pottsville Formation of the Black Warrior basin in Alabama comprises as much as 3000 m of shale, sandstone, and coal. The boundary between the informal units of the lower Pottsville and the upper Pottsville is the base of the Black Creek coal group, in the middle part of the section. Lower Pottsville strata include orthoquartzitic sandstone, shale, and coal interpreted as having been deposited in a barrier/back-barrier setting. Upper Pottsville strata consist of lithic arenite, shale, coal, and minor amounts of orthoquartzite, and are interpreted as representing a lateral gradation from lower delta plain to barrier bar. Previous studies indicated northward sediment dispersal. The change in sedimentation patterns in the middle part of the Pottsville suggests introduction into the basin of sediments from an eastern source during Pottsville deposition.

Journal of Sedimentary Petrology↗
USGS1984

Submarine sand dunes and sedimentary environments in Oceanographer Canyon.

Observations from research submersibles in the northern part of Oceanographer Canyon reveal the presence of an extensive field of large sand dunes on the canyon floor. The dunes are medium to coarse sand, are oriented across the axis, and the largest of them are as high as 3 m and have wavelengths up to 15 m. Their asymmetry, grain size, and height suggest that they are formed by axial currents flowing up- and downcanyon and that the largest dunes require flows of at least 70 cm/sec. Shelf sand, low in silt and clay content, is transported by currents down and along the canyon walls onto the canyon floor. As the sand enters the canyon, it is mixed with immobile gravel deposits on the canyon rim; lower on the walls, the sand is mixed with silt and clay burrowed by organisms from the semiconsolidated sandy silt that underlies the canyon walls and floor. Upon reaching the canyon floor, the sand is sculpted into bed forms by currents, and the fines are winnowed out and transported out of the canyon. At present, the shelf and canyon walls are being eroded by bottom currents and burrowing organisms, whereas the canyon floor is covered by mobile sand that moves both up and down the axis in this part of the canyon.

Journal of Sedimentary Petrology↗